---------------------------
+What: MXSER
+When: December 2007
+Why: Old mxser driver is obsoleted by the mxser_new. Give it some time yet
+ and remove it.
+Who: Jiri Slaby <jirislaby@gmail.com>
+
+---------------------------
+
+What: V4L2 VIDIOC_G_MPEGCOMP and VIDIOC_S_MPEGCOMP
+When: October 2007
+Why: Broken attempt to set MPEG compression parameters. These ioctls are
+ not able to implement the wide variety of parameters that can be set
+ by hardware MPEG encoders. A new MPEG control mechanism was created
+ in kernel 2.6.18 that replaces these ioctls. See the V4L2 specification
+ (section 1.9: Extended controls) for more information on this topic.
+Who: Hans Verkuil <hverkuil@xs4all.nl> and
+ Mauro Carvalho Chehab <mchehab@infradead.org>
+
+---------------------------
+
What: /sys/devices/.../power/state
dev->power.power_state
dpm_runtime_{suspend,resume)()
---------------------------
What: raw1394: requests of type RAW1394_REQ_ISO_SEND, RAW1394_REQ_ISO_LISTEN
-When: November 2006
-Why: Deprecated in favour of the new ioctl-based rawiso interface, which is
- more efficient. You should really be using libraw1394 for raw1394
- access anyway.
-Who: Jody McIntyre <scjody@modernduck.com>
+When: June 2007
+Why: Deprecated in favour of the more efficient and robust rawiso interface.
+ Affected are applications which use the deprecated part of libraw1394
+ (raw1394_iso_write, raw1394_start_iso_write, raw1394_start_iso_rcv,
+ raw1394_stop_iso_rcv) or bypass libraw1394.
+Who: Dan Dennedy <dan@dennedy.org>, Stefan Richter <stefanr@s5r6.in-berlin.de>
---------------------------
---------------------------
-What: pci_module_init(driver)
-When: January 2007
-Why: Is replaced by pci_register_driver(pci_driver).
-Who: Richard Knutsson <ricknu-0@student.ltu.se> and Greg Kroah-Hartman <gregkh@suse.de>
-
----------------------------
-
-What: Usage of invalid timevals in setitimer
-When: March 2007
-Why: POSIX requires to validate timevals in the setitimer call. This
- was never done by Linux. The invalid (e.g. negative timevals) were
- silently converted to more or less random timeouts and intervals.
- Until the removal a per boot limited number of warnings is printed
- and the timevals are sanitized.
-
-Who: Thomas Gleixner <tglx@linutronix.de>
-
----------------------------
-
-What: I2C interface of the it87 driver
-When: January 2007
-Why: The ISA interface is faster and should be always available. The I2C
- probing is also known to cause trouble in at least one case (see
- bug #5889.)
-Who: Jean Delvare <khali@linux-fr.org>
-
----------------------------
-
What: Unused EXPORT_SYMBOL/EXPORT_SYMBOL_GPL exports
(temporary transition config option provided until then)
The transition config option will also be removed at the same time.
---------------------------
-What: mount/umount uevents
-When: February 2007
-Why: These events are not correct, and do not properly let userspace know
- when a file system has been mounted or unmounted. Userspace should
- poll the /proc/mounts file instead to detect this properly.
-Who: Greg Kroah-Hartman <gregkh@suse.de>
-
----------------------------
-
What: USB driver API moves to EXPORT_SYMBOL_GPL
When: February 2008
Files: include/linux/usb.h, drivers/usb/core/driver.c
---------------------------
-What: find_trylock_page
-When: January 2007
-Why: The interface no longer has any callers left in the kernel. It
- is an odd interface (compared with other find_*_page functions), in
- that it does not take a refcount to the page, only the page lock.
- It should be replaced with find_get_page or find_lock_page if possible.
- This feature removal can be reevaluated if users of the interface
- cannot cleanly use something else.
-Who: Nick Piggin <npiggin@suse.de>
-
----------------------------
-
What: Interrupt only SA_* flags
-When: Januar 2007
+When: September 2007
Why: The interrupt related SA_* flags are replaced by IRQF_* to move them
out of the signal namespace.
---------------------------
-What: i2c-ite and i2c-algo-ite drivers
-When: September 2006
-Why: These drivers never compiled since they were added to the kernel
- tree 5 years ago. This feature removal can be reevaluated if
- someone shows interest in the drivers, fixes them and takes over
- maintenance.
- http://marc.theaimsgroup.com/?l=linux-mips&m=115040510817448
-Who: Jean Delvare <khali@linux-fr.org>
-
----------------------------
-
-What: Bridge netfilter deferred IPv4/IPv6 output hook calling
-When: January 2007
-Why: The deferred output hooks are a layering violation causing unusual
- and broken behaviour on bridge devices. Examples of things they
- break include QoS classifation using the MARK or CLASSIFY targets,
- the IPsec policy match and connection tracking with VLANs on a
- bridge. Their only use is to enable bridge output port filtering
- within iptables with the physdev match, which can also be done by
- combining iptables and ebtables using netfilter marks. Until it
- will get removed the hook deferral is disabled by default and is
- only enabled when needed.
-
-Who: Patrick McHardy <kaber@trash.net>
-
----------------------------
-
What: PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment
When: October 2008
Why: The stacking of class devices makes these values misleading and
---------------------------
-What: ftape
-When: 2.6.20
-Why: Orphaned for ages. SMP bugs long unfixed. Few users left
- in the world.
-Who: Jeff Garzik <jeff@garzik.org>
+What: i2c_adapter.list
+When: July 2007
+Why: Superfluous, this list duplicates the one maintained by the driver
+ core.
+Who: Jean Delvare <khali@linux-fr.org>,
+ David Brownell <dbrownell@users.sourceforge.net>
+
+---------------------------
+
+What: drivers depending on OBSOLETE_OSS
+When: options in 2.6.22, code in 2.6.24
+Why: OSS drivers with ALSA replacements
+Who: Adrian Bunk <bunk@stusta.de>
+
+---------------------------
+
+What: ACPI hooks (X86_SPEEDSTEP_CENTRINO_ACPI) in speedstep-centrino driver
+When: December 2006
+Why: Speedstep-centrino driver with ACPI hooks and acpi-cpufreq driver are
+ functionally very much similar. They talk to ACPI in same way. Only
+ difference between them is the way they do frequency transitions.
+ One uses MSRs and the other one uses IO ports. Functionaliy of
+ speedstep_centrino with ACPI hooks is now merged into acpi-cpufreq.
+ That means one common driver will support all Intel Enhanced Speedstep
+ capable CPUs. That means less confusion over name of
+ speedstep-centrino driver (with that driver supposed to be used on
+ non-centrino platforms). That means less duplication of code and
+ less maintenance effort and no possibility of these two drivers
+ going out of sync.
+ Current users of speedstep_centrino with ACPI hooks are requested to
+ switch over to acpi-cpufreq driver. speedstep-centrino will continue
+ to work using older non-ACPI static table based scheme even after this
+ date.
+
+Who: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+
+---------------------------
+
+What: /sys/firmware/acpi/namespace
+When: 2.6.21
+Why: The ACPI namespace is effectively the symbol list for
+ the BIOS. The device names are completely arbitrary
+ and have no place being exposed to user-space.
+
+ For those interested in the BIOS ACPI namespace,
+ the BIOS can be extracted and disassembled with acpidump
+ and iasl as documented in the pmtools package here:
+ http://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/utils
+Who: Len Brown <len.brown@intel.com>
+
+---------------------------
+
+What: ACPI procfs interface
+When: July 2007
+Why: After ACPI sysfs conversion, ACPI attributes will be duplicated
+ in sysfs and the ACPI procfs interface should be removed.
+Who: Zhang Rui <rui.zhang@intel.com>
+
+---------------------------
+
+What: /proc/acpi/button
+When: August 2007
+Why: /proc/acpi/button has been replaced by events to the input layer
+ since 2.6.20.
+Who: Len Brown <len.brown@intel.com>
+
+---------------------------
+
+What: sk98lin network driver
+When: July 2007
+Why: In kernel tree version of driver is unmaintained. Sk98lin driver
+ replaced by the skge driver.
+Who: Stephen Hemminger <shemminger@osdl.org>
+
+---------------------------
+
+What: Compaq touchscreen device emulation
+When: Oct 2007
+Files: drivers/input/tsdev.c
+Why: The code says it was obsolete when it was written in 2001.
+ tslib is a userspace library which does anything tsdev can do and
+ much more besides in userspace where this code belongs. There is no
+ longer any need for tsdev and applications should have converted to
+ use tslib by now.
+ The name "tsdev" is also extremely confusing and lots of people have
+ it loaded when they don't need/use it.
+Who: Richard Purdie <rpurdie@rpsys.net>
+
+---------------------------
+
+What: i8xx_tco watchdog driver
+When: in 2.6.22
+Why: the i8xx_tco watchdog driver has been replaced by the iTCO_wdt
+ watchdog driver.
+Who: Wim Van Sebroeck <wim@iguana.be>
+
+---------------------------
+
+What: Multipath cached routing support in ipv4
+When: in 2.6.23
+Why: Code was merged, then submitter immediately disappeared leaving
+ us with no maintainer and lots of bugs. The code should not have
+ been merged in the first place, and many aspects of it's
+ implementation are blocking more critical core networking
+ development. It's marked EXPERIMENTAL and no distribution
+ enables it because it cause obscure crashes due to unfixable bugs
+ (interfaces don't return errors so memory allocation can't be
+ handled, calling contexts of these interfaces make handling
+ errors impossible too because they get called after we've
+ totally commited to creating a route object, for example).
+ This problem has existed for years and no forward progress
+ has ever been made, and nobody steps up to try and salvage
+ this code, so we're going to finally just get rid of it.
+Who: David S. Miller <davem@davemloft.net>
+
+---------------------------
+
+What: read_dev_chars(), read_conf_data{,_lpm}() (s390 common I/O layer)
+When: December 2007
+Why: These functions are a leftover from 2.4 times. They have several
+ problems:
+ - Duplication of checks that are done in the device driver's
+ interrupt handler
+ - common I/O layer can't do device specific error recovery
+ - device driver can't be notified for conditions happening during
+ execution of the function
+ Device drivers should issue the read device characteristics and read
+ configuration data ccws and do the appropriate error handling
+ themselves.
+Who: Cornelia Huck <cornelia.huck@de.ibm.com>
+
+---------------------------
+
+What: i2c-ixp2000, i2c-ixp4xx and scx200_i2c drivers
+When: September 2007
+Why: Obsolete. The new i2c-gpio driver replaces all hardware-specific
+ I2C-over-GPIO drivers.
+Who: Jean Delvare <khali@linux-fr.org>
+
+---------------------------
+
+What: drivers depending on OSS_OBSOLETE
+When: options in 2.6.23, code in 2.6.25
+Why: obsolete OSS drivers
+Who: Adrian Bunk <bunk@stusta.de>
---------------------------
+
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff