---------------------------
-What: devfs
-When: July 2005
-Files: fs/devfs/*, include/linux/devfs_fs*.h and assorted devfs
- function calls throughout the kernel tree
-Why: It has been unmaintained for a number of years, has unfixable
- races, contains a naming policy within the kernel that is
- against the LSB, and can be replaced by using udev.
-Who: Greg Kroah-Hartman <greg@kroah.com>
+What: /sys/devices/.../power/state
+ dev->power.power_state
+ dpm_runtime_{suspend,resume)()
+When: July 2007
+Why: Broken design for runtime control over driver power states, confusing
+ driver-internal runtime power management with: mechanisms to support
+ system-wide sleep state transitions; event codes that distinguish
+ different phases of swsusp "sleep" transitions; and userspace policy
+ inputs. This framework was never widely used, and most attempts to
+ use it were broken. Drivers should instead be exposing domain-specific
+ interfaces either to kernel or to userspace.
+Who: Pavel Machek <pavel@suse.cz>
---------------------------
-What: ACPI S4bios support
-When: May 2005
-Why: Noone uses it, and it probably does not work, anyway. swsusp is
- faster, more reliable, and people are actually using it.
-Who: Pavel Machek <pavel@suse.cz>
+What: RAW driver (CONFIG_RAW_DRIVER)
+When: December 2005
+Why: declared obsolete since kernel 2.6.3
+ O_DIRECT can be used instead
+Who: Adrian Bunk <bunk@stusta.de>
+
+---------------------------
+
+What: raw1394: requests of type RAW1394_REQ_ISO_SEND, RAW1394_REQ_ISO_LISTEN
+When: November 2006
+Why: Deprecated in favour of the new ioctl-based rawiso interface, which is
+ more efficient. You should really be using libraw1394 for raw1394
+ access anyway.
+Who: Jody McIntyre <scjody@modernduck.com>
+
+---------------------------
+
+What: Video4Linux API 1 ioctls and video_decoder.h from Video devices.
+When: December 2006
+Why: V4L1 AP1 was replaced by V4L2 API. during migration from 2.4 to 2.6
+ series. The old API have lots of drawbacks and don't provide enough
+ means to work with all video and audio standards. The newer API is
+ already available on the main drivers and should be used instead.
+ Newer drivers should use v4l_compat_translate_ioctl function to handle
+ old calls, replacing to newer ones.
+ Decoder iocts are using internally to allow video drivers to
+ communicate with video decoders. This should also be improved to allow
+ V4L2 calls being translated into compatible internal ioctls.
+Who: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
+
+---------------------------
+
+What: PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
+When: November 2005
+Files: drivers/pcmcia/: pcmcia_ioctl.c
+Why: With the 16-bit PCMCIA subsystem now behaving (almost) like a
+ normal hotpluggable bus, and with it using the default kernel
+ infrastructure (hotplug, driver core, sysfs) keeping the PCMCIA
+ control ioctl needed by cardmgr and cardctl from pcmcia-cs is
+ unnecessary, and makes further cleanups and integration of the
+ PCMCIA subsystem into the Linux kernel device driver model more
+ difficult. The features provided by cardmgr and cardctl are either
+ handled by the kernel itself now or are available in the new
+ pcmciautils package available at
+ http://kernel.org/pub/linux/utils/kernel/pcmcia/
+Who: Dominik Brodowski <linux@brodo.de>
+
+---------------------------
+
+What: remove EXPORT_SYMBOL(kernel_thread)
+When: August 2006
+Files: arch/*/kernel/*_ksyms.c
+Why: kernel_thread is a low-level implementation detail. Drivers should
+ use the <linux/kthread.h> API instead which shields them from
+ implementation details and provides a higherlevel interface that
+ prevents bugs and code duplication
+Who: Christoph Hellwig <hch@lst.de>
+
+---------------------------
+
+What: CONFIG_FORCED_INLINING
+When: June 2006
+Why: Config option is there to see if gcc is good enough. (in january
+ 2006). If it is, the behavior should just be the default. If it's not,
+ the option should just go away entirely.
+Who: Arjan van de Ven
+
+---------------------------
+
+What: eepro100 network driver
+When: January 2007
+Why: replaced by the e100 driver
+Who: Adrian Bunk <bunk@stusta.de>
+
+---------------------------
+
+What: drivers depending on OSS_OBSOLETE_DRIVER
+When: options in 2.6.20, code in 2.6.22
+Why: OSS drivers with ALSA replacements
+Who: Adrian Bunk <bunk@stusta.de>
+
+---------------------------
+
+What: pci_module_init(driver)
+When: January 2007
+Why: Is replaced by pci_register_driver(pci_driver).
+Who: Richard Knutsson <ricknu-0@student.ltu.se> and Greg Kroah-Hartman <gregkh@suse.de>
+
+---------------------------
+
+What: Usage of invalid timevals in setitimer
+When: March 2007
+Why: POSIX requires to validate timevals in the setitimer call. This
+ was never done by Linux. The invalid (e.g. negative timevals) were
+ silently converted to more or less random timeouts and intervals.
+ Until the removal a per boot limited number of warnings is printed
+ and the timevals are sanitized.
+
+Who: Thomas Gleixner <tglx@linutronix.de>
---------------------------
-What: PCI Name Database (CONFIG_PCI_NAMES)
-When: July 2005
-Why: It bloats the kernel unnecessarily, and is handled by userspace better
- (pciutils supports it.) Will eliminate the need to try to keep the
- pci.ids file in sync with the sf.net database all of the time.
+What: I2C interface of the it87 driver
+When: January 2007
+Why: The ISA interface is faster and should be always available. The I2C
+ probing is also known to cause trouble in at least one case (see
+ bug #5889.)
+Who: Jean Delvare <khali@linux-fr.org>
+
+---------------------------
+
+What: Unused EXPORT_SYMBOL/EXPORT_SYMBOL_GPL exports
+ (temporary transition config option provided until then)
+ The transition config option will also be removed at the same time.
+When: before 2.6.19
+Why: Unused symbols are both increasing the size of the kernel binary
+ and are often a sign of "wrong API"
+Who: Arjan van de Ven <arjan@linux.intel.com>
+
+---------------------------
+
+What: mount/umount uevents
+When: February 2007
+Why: These events are not correct, and do not properly let userspace know
+ when a file system has been mounted or unmounted. Userspace should
+ poll the /proc/mounts file instead to detect this properly.
Who: Greg Kroah-Hartman <gregkh@suse.de>
---------------------------
-What: io_remap_page_range() (macro or function)
-When: September 2005
-Why: Replaced by io_remap_pfn_range() which allows more memory space
- addressabilty (by using a pfn) and supports sparc & sparc64
- iospace as part of the pfn.
-Who: Randy Dunlap <rddunlap@osdl.org>
+What: USB driver API moves to EXPORT_SYMBOL_GPL
+When: February 2008
+Files: include/linux/usb.h, drivers/usb/core/driver.c
+Why: The USB subsystem has changed a lot over time, and it has been
+ possible to create userspace USB drivers using usbfs/libusb/gadgetfs
+ that operate as fast as the USB bus allows. Because of this, the USB
+ subsystem will not be allowing closed source kernel drivers to
+ register with it, after this grace period is over. If anyone needs
+ any help in converting their closed source drivers over to use the
+ userspace filesystems, please contact the
+ linux-usb-devel@lists.sourceforge.net mailing list, and the developers
+ there will be glad to help you out.
+Who: Greg Kroah-Hartman <gregkh@suse.de>
---------------------------
-What: register_ioctl32_conversion() / unregister_ioctl32_conversion()
-When: April 2005
-Why: Replaced by ->compat_ioctl in file_operations and other method
- vecors.
-Who: Andi Kleen <ak@muc.de>, Christoph Hellwig <hch@lst.de>
+What: find_trylock_page
+When: January 2007
+Why: The interface no longer has any callers left in the kernel. It
+ is an odd interface (compared with other find_*_page functions), in
+ that it does not take a refcount to the page, only the page lock.
+ It should be replaced with find_get_page or find_lock_page if possible.
+ This feature removal can be reevaluated if users of the interface
+ cannot cleanly use something else.
+Who: Nick Piggin <npiggin@suse.de>
---------------------------
-What: RCU API moves to EXPORT_SYMBOL_GPL
-When: April 2006
-Files: include/linux/rcupdate.h, kernel/rcupdate.c
-Why: Outside of Linux, the only implementations of anything even
- vaguely resembling RCU that I am aware of are in DYNIX/ptx,
- VM/XA, Tornado, and K42. I do not expect anyone to port binary
- drivers or kernel modules from any of these, since the first two
- are owned by IBM and the last two are open-source research OSes.
- So these will move to GPL after a grace period to allow
- people, who might be using implementations that I am not aware
- of, to adjust to this upcoming change.
-Who: Paul E. McKenney <paulmck@us.ibm.com>
+What: Interrupt only SA_* flags
+When: Januar 2007
+Why: The interrupt related SA_* flags are replaced by IRQF_* to move them
+ out of the signal namespace.
+
+Who: Thomas Gleixner <tglx@linutronix.de>
---------------------------
-What: IEEE1394 Audio and Music Data Transmission Protocol driver,
- Connection Management Procedures driver
-When: November 2005
-Files: drivers/ieee1394/{amdtp,cmp}*
-Why: These are incomplete, have never worked, and are better implemented
- in userland via raw1394 (see http://freebob.sourceforge.net/ for
- example.)
-Who: Jody McIntyre <scjody@steamballoon.com>
+What: i2c-ite and i2c-algo-ite drivers
+When: September 2006
+Why: These drivers never compiled since they were added to the kernel
+ tree 5 years ago. This feature removal can be reevaluated if
+ someone shows interest in the drivers, fixes them and takes over
+ maintenance.
+ http://marc.theaimsgroup.com/?l=linux-mips&m=115040510817448
+Who: Jean Delvare <khali@linux-fr.org>
---------------------------
-What: raw1394: requests of type RAW1394_REQ_ISO_SEND, RAW1394_REQ_ISO_LISTEN
-When: November 2005
-Why: Deprecated in favour of the new ioctl-based rawiso interface, which is
- more efficient. You should really be using libraw1394 for raw1394
- access anyway.
-Who: Jody McIntyre <scjody@steamballoon.com>
+What: Bridge netfilter deferred IPv4/IPv6 output hook calling
+When: January 2007
+Why: The deferred output hooks are a layering violation causing unusual
+ and broken behaviour on bridge devices. Examples of things they
+ break include QoS classifation using the MARK or CLASSIFY targets,
+ the IPsec policy match and connection tracking with VLANs on a
+ bridge. Their only use is to enable bridge output port filtering
+ within iptables with the physdev match, which can also be done by
+ combining iptables and ebtables using netfilter marks. Until it
+ will get removed the hook deferral is disabled by default and is
+ only enabled when needed.
+
+Who: Patrick McHardy <kaber@trash.net>
---------------------------
-What: i2c sysfs name change: in1_ref, vid deprecated in favour of cpu0_vid
-When: November 2005
-Files: drivers/i2c/chips/adm1025.c, drivers/i2c/chips/adm1026.c
-Why: Match the other drivers' name for the same function, duplicate names
- will be available until removal of old names.
-Who: Grant Coady <gcoady@gmail.com>
+What: PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment
+When: October 2008
+Why: The stacking of class devices makes these values misleading and
+ inconsistent.
+ Class devices should not carry any of these properties, and bus
+ devices have SUBSYTEM and DRIVER as a replacement.
+Who: Kay Sievers <kay.sievers@suse.de>
+---------------------------
+
+What: i2c-isa
+When: December 2006
+Why: i2c-isa is a non-sense and doesn't fit in the device driver
+ model. Drivers relying on it are better implemented as platform
+ drivers.
+Who: Jean Delvare <khali@linux-fr.org>
+
+---------------------------
+
+What: IPv4 only connection tracking/NAT/helpers
+When: 2.6.22
+Why: The new layer 3 independant connection tracking replaces the old
+ IPv4 only version. After some stabilization of the new code the
+ old one will be removed.
+Who: Patrick McHardy <kaber@trash.net>
+
+---------------------------