git://ftp.safe.ca
/
safe
/
jmp
/
linux-2.6
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
tree
raw
|
inline
| side by side
ALSA: hda - Fix conflicting volume controls on ALC260
[safe/jmp/linux-2.6]
/
sound
/
pci
/
vx222
/
vx222_ops.c
diff --git
a/sound/pci/vx222/vx222_ops.c
b/sound/pci/vx222/vx222_ops.c
index
631f3a6
..
7e87f39
100644
(file)
--- a/
sound/pci/vx222/vx222_ops.c
+++ b/
sound/pci/vx222/vx222_ops.c
@@
-253,7
+253,8
@@
static void vx2_dma_write(struct vx_core *chip, struct snd_pcm_runtime *runtime,
int offset = pipe->hw_ptr;
u32 *addr = (u32 *)(runtime->dma_area + offset);
int offset = pipe->hw_ptr;
u32 *addr = (u32 *)(runtime->dma_area + offset);
- snd_assert(count % 4 == 0, return);
+ if (snd_BUG_ON(count % 4))
+ return;
vx2_setup_pseudo_dma(chip, 1);
vx2_setup_pseudo_dma(chip, 1);
@@
-291,7
+292,8
@@
static void vx2_dma_read(struct vx_core *chip, struct snd_pcm_runtime *runtime,
u32 *addr = (u32 *)(runtime->dma_area + offset);
unsigned long port = vx2_reg_addr(chip, VX_DMA);
u32 *addr = (u32 *)(runtime->dma_area + offset);
unsigned long port = vx2_reg_addr(chip, VX_DMA);
- snd_assert(count % 4 == 0, return);
+ if (snd_BUG_ON(count % 4))
+ return;
vx2_setup_pseudo_dma(chip, 0);
/* Transfer using pseudo-dma.
vx2_setup_pseudo_dma(chip, 0);
/* Transfer using pseudo-dma.
@@
-675,7
+677,8
@@
static void vx2_write_akm(struct vx_core *chip, int reg, unsigned int data)
a look up table, as there is no linear matching between the driver codec values
and the real dBu value
*/
a look up table, as there is no linear matching between the driver codec values
and the real dBu value
*/
- snd_assert(data < sizeof(vx2_akm_gains_lut), return);
+ if (snd_BUG_ON(data >= sizeof(vx2_akm_gains_lut)))
+ return;
switch (reg) {
case XX_CODEC_LEVEL_LEFT_REGISTER:
switch (reg) {
case XX_CODEC_LEVEL_LEFT_REGISTER:
@@
-823,7
+826,8
@@
static void vx2_set_input_level(struct snd_vx222 *chip)
preamp++; /* raise pre ampli + 18dB */
miclevel -= (18 * 2); /* lower level 18 dB (*2 because of 0.5 dB steps !) */
}
preamp++; /* raise pre ampli + 18dB */
miclevel -= (18 * 2); /* lower level 18 dB (*2 because of 0.5 dB steps !) */
}
- snd_assert(preamp < 4, return);
+ if (snd_BUG_ON(preamp >= 4))
+ return;
/* set pre-amp level */
chip->regSELMIC &= ~MICRO_SELECT_PREAMPLI_MASK;
/* set pre-amp level */
chip->regSELMIC &= ~MICRO_SELECT_PREAMPLI_MASK;