nfsd4: fix error return when pseudoroot missing

[safe/jmp/linux-2.6] / lib / Kconfig.debug

diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 4116e10..8911558 100644 (file)
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -50,6 +50,14 @@ config MAGIC_SYSRQ
          keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
          unless you really know what this hack does.
 
          keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
          unless you really know what this hack does.
 

+config STRIP_ASM_SYMS
+       bool "Strip assembler-generated symbols during link"
+       default n
+       help
+         Strip internal assembler-generated symbols during a link (symbols
+         that look like '.Lxxx') so they don't pollute the output of
+         get_wchan() and suchlike.
+

 config UNUSED_SYMBOLS
        bool "Enable unused/obsolete exported symbols"
        default y if X86
 config UNUSED_SYMBOLS
        bool "Enable unused/obsolete exported symbols"
        default y if X86


@@ -186,6 +194,44 @@ config BOOTPARAM_SOFTLOCKUP_PANIC_VALUE
        default 0 if !BOOTPARAM_SOFTLOCKUP_PANIC
        default 1 if BOOTPARAM_SOFTLOCKUP_PANIC
 
        default 0 if !BOOTPARAM_SOFTLOCKUP_PANIC
        default 1 if BOOTPARAM_SOFTLOCKUP_PANIC
 

+config DETECT_HUNG_TASK
+       bool "Detect Hung Tasks"
+       depends on DEBUG_KERNEL
+       default DETECT_SOFTLOCKUP
+       help
+         Say Y here to enable the kernel to detect "hung tasks",
+         which are bugs that cause the task to be stuck in
+         uninterruptible "D" state indefinitiley.
+
+         When a hung task is detected, the kernel will print the
+         current stack trace (which you should report), but the
+         task will stay in uninterruptible state. If lockdep is
+         enabled then all held locks will also be reported. This
+         feature has negligible overhead.
+
+config BOOTPARAM_HUNG_TASK_PANIC
+       bool "Panic (Reboot) On Hung Tasks"
+       depends on DETECT_HUNG_TASK
+       help
+         Say Y here to enable the kernel to panic on "hung tasks",
+         which are bugs that cause the kernel to leave a task stuck
+         in uninterruptible "D" state.
+
+         The panic can be used in combination with panic_timeout,
+         to cause the system to reboot automatically after a
+         hung task has been detected. This feature is useful for
+         high-availability systems that have uptime guarantees and
+         where a hung tasks must be resolved ASAP.
+
+         Say N if unsure.
+
+config BOOTPARAM_HUNG_TASK_PANIC_VALUE
+       int
+       depends on DETECT_HUNG_TASK
+       range 0 1
+       default 0 if !BOOTPARAM_HUNG_TASK_PANIC
+       default 1 if BOOTPARAM_HUNG_TASK_PANIC
+

 config SCHED_DEBUG
        bool "Collect scheduler debugging info"
        depends on DEBUG_KERNEL && PROC_FS
 config SCHED_DEBUG
        bool "Collect scheduler debugging info"
        depends on DEBUG_KERNEL && PROC_FS


@@ -252,9 +298,17 @@ config DEBUG_OBJECTS_TIMERS
          timer routines to track the life time of timer objects and
          validate the timer operations.
 
          timer routines to track the life time of timer objects and
          validate the timer operations.
 

+config DEBUG_OBJECTS_ENABLE_DEFAULT
+       int "debug_objects bootup default value (0-1)"
+        range 0 1
+        default "1"
+        depends on DEBUG_OBJECTS
+        help
+          Debug objects boot parameter default value
+

 config DEBUG_SLAB
        bool "Debug slab memory allocations"
 config DEBUG_SLAB
        bool "Debug slab memory allocations"

-       depends on DEBUG_KERNEL && SLAB
+       depends on DEBUG_KERNEL && SLAB && !KMEMCHECK

        help
          Say Y here to have the kernel do limited verification on memory
          allocation as well as poisoning memory on free to catch use of freed
        help
          Say Y here to have the kernel do limited verification on memory
          allocation as well as poisoning memory on free to catch use of freed


@@ -266,7 +320,7 @@ config DEBUG_SLAB_LEAK
 
 config SLUB_DEBUG_ON
        bool "SLUB debugging on by default"
 
 config SLUB_DEBUG_ON
        bool "SLUB debugging on by default"

-       depends on SLUB && SLUB_DEBUG
+       depends on SLUB && SLUB_DEBUG && !KMEMCHECK

        default n
        help
          Boot with debugging on by default. SLUB boots by default with
        default n
        help
          Boot with debugging on by default. SLUB boots by default with


@@ -290,6 +344,51 @@ config SLUB_STATS
          out which slabs are relevant to a particular load.
          Try running: slabinfo -DA
 
          out which slabs are relevant to a particular load.
          Try running: slabinfo -DA
 

+config DEBUG_KMEMLEAK
+       bool "Kernel memory leak detector"
+       depends on DEBUG_KERNEL && EXPERIMENTAL && (X86 || ARM || PPC) && \
+               !MEMORY_HOTPLUG
+       select DEBUG_FS if SYSFS
+       select STACKTRACE if STACKTRACE_SUPPORT
+       select KALLSYMS
+       help
+         Say Y here if you want to enable the memory leak
+         detector. The memory allocation/freeing is traced in a way
+         similar to the Boehm's conservative garbage collector, the
+         difference being that the orphan objects are not freed but
+         only shown in /sys/kernel/debug/kmemleak. Enabling this
+         feature will introduce an overhead to memory
+         allocations. See Documentation/kmemleak.txt for more
+         details.
+
+         Enabling DEBUG_SLAB or SLUB_DEBUG may increase the chances
+         of finding leaks due to the slab objects poisoning.
+
+         In order to access the kmemleak file, debugfs needs to be
+         mounted (usually at /sys/kernel/debug).
+
+config DEBUG_KMEMLEAK_EARLY_LOG_SIZE
+       int "Maximum kmemleak early log entries"
+       depends on DEBUG_KMEMLEAK
+       range 200 2000
+       default 400
+       help
+         Kmemleak must track all the memory allocations to avoid
+         reporting false positives. Since memory may be allocated or
+         freed before kmemleak is initialised, an early log buffer is
+         used to store these actions. If kmemleak reports "early log
+         buffer exceeded", please increase this value.
+
+config DEBUG_KMEMLEAK_TEST
+       tristate "Simple test for the kernel memory leak detector"
+       depends on DEBUG_KMEMLEAK
+       help
+         Say Y or M here to build a test for the kernel memory leak
+         detector. This option enables a module that explicitly leaks
+         memory.
+
+         If unsure, say N.
+

 config DEBUG_PREEMPT
        bool "Debug preemptible kernel"
        depends on DEBUG_KERNEL && PREEMPT && (TRACE_IRQFLAGS_SUPPORT || PPC64)
 config DEBUG_PREEMPT
        bool "Debug preemptible kernel"
        depends on DEBUG_KERNEL && PREEMPT && (TRACE_IRQFLAGS_SUPPORT || PPC64)


@@ -394,7 +493,7 @@ config LOCKDEP
        bool
        depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
        select STACKTRACE
        bool
        depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
        select STACKTRACE

-       select FRAME_POINTER if !X86 && !MIPS && !PPC
+       select FRAME_POINTER if !MIPS && !PPC && !ARM_UNWIND && !S390

        select KALLSYMS
        select KALLSYMS_ALL
 
        select KALLSYMS
        select KALLSYMS_ALL
 


@@ -495,6 +594,22 @@ config DEBUG_VM
 
          If unsure, say N.
 
 
          If unsure, say N.
 

+config DEBUG_VIRTUAL
+       bool "Debug VM translations"
+       depends on DEBUG_KERNEL && X86
+       help
+         Enable some costly sanity checks in virtual to page code. This can
+         catch mistakes with virt_to_page() and friends.
+
+         If unsure, say N.
+
+config DEBUG_NOMMU_REGIONS
+       bool "Debug the global anon/private NOMMU mapping region tree"
+       depends on DEBUG_KERNEL && !MMU
+       help
+         This option causes the global tree of anonymous and private mapping
+         regions to be regularly checked for invalid topology.
+

 config DEBUG_WRITECOUNT
        bool "Debug filesystem writers count"
        depends on DEBUG_KERNEL
 config DEBUG_WRITECOUNT
        bool "Debug filesystem writers count"
        depends on DEBUG_KERNEL


@@ -546,17 +661,41 @@ config DEBUG_NOTIFIERS
          This is a relatively cheap check but if you care about maximum
          performance, say N.
 
          This is a relatively cheap check but if you care about maximum
          performance, say N.
 

+config DEBUG_CREDENTIALS
+       bool "Debug credential management"
+       depends on DEBUG_KERNEL
+       help
+         Enable this to turn on some debug checking for credential
+         management.  The additional code keeps track of the number of
+         pointers from task_structs to any given cred struct, and checks to
+         see that this number never exceeds the usage count of the cred
+         struct.
+
+         Furthermore, if SELinux is enabled, this also checks that the
+         security pointer in the cred struct is never seen to be invalid.
+
+         If unsure, say N.
+
+#
+# Select this config option from the architecture Kconfig, if it
+# it is preferred to always offer frame pointers as a config
+# option on the architecture (regardless of KERNEL_DEBUG):
+#
+config ARCH_WANT_FRAME_POINTERS
+       bool
+       help
+

 config FRAME_POINTER
        bool "Compile the kernel with frame pointers"
        depends on DEBUG_KERNEL && \
 config FRAME_POINTER
        bool "Compile the kernel with frame pointers"
        depends on DEBUG_KERNEL && \

-               (X86 || CRIS || M68K || M68KNOMMU || FRV || UML || S390 || \
-                AVR32 || SUPERH || BLACKFIN || MN10300)
-       default y if DEBUG_INFO && UML
+               (CRIS || M68K || M68KNOMMU || FRV || UML || \
+                AVR32 || SUPERH || BLACKFIN || MN10300) || \
+               ARCH_WANT_FRAME_POINTERS
+       default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS

        help
        help

-         If you say Y here the resulting kernel image will be slightly larger
-         and slower, but it might give very useful debugging information on
-         some architectures or if you use external debuggers.
-         If you don't debug the kernel, you can say N.
+         If you say Y here the resulting kernel image will be slightly
+         larger and slower, but it gives very useful debugging information
+         in case of kernel bugs. (precise oopses/stacktraces/warnings)

 
 config BOOT_PRINTK_DELAY
        bool "Delay each boot printk message by N milliseconds"
 
 config BOOT_PRINTK_DELAY
        bool "Delay each boot printk message by N milliseconds"


@@ -607,6 +746,19 @@ config RCU_TORTURE_TEST_RUNNABLE
          Say N here if you want the RCU torture tests to start only
          after being manually enabled via /proc.
 
          Say N here if you want the RCU torture tests to start only
          after being manually enabled via /proc.
 

+config RCU_CPU_STALL_DETECTOR
+       bool "Check for stalled CPUs delaying RCU grace periods"
+       depends on TREE_RCU || TREE_PREEMPT_RCU
+       default n
+       help
+         This option causes RCU to printk information on which
+         CPUs are delaying the current grace period, but only when
+         the grace period extends for excessive time periods.
+
+         Say Y if you want RCU to perform such checks.
+
+         Say N if you are unsure.
+

 config KPROBES_SANITY_TEST
        bool "Kprobes sanity tests"
        depends on DEBUG_KERNEL
 config KPROBES_SANITY_TEST
        bool "Kprobes sanity tests"
        depends on DEBUG_KERNEL


@@ -634,6 +786,48 @@ config BACKTRACE_SELF_TEST
 
          Say N if you are unsure.
 
 
          Say N if you are unsure.
 

+config DEBUG_BLOCK_EXT_DEVT
+        bool "Force extended block device numbers and spread them"
+       depends on DEBUG_KERNEL
+       depends on BLOCK
+       default n
+       help
+         BIG FAT WARNING: ENABLING THIS OPTION MIGHT BREAK BOOTING ON
+         SOME DISTRIBUTIONS.  DO NOT ENABLE THIS UNLESS YOU KNOW WHAT
+         YOU ARE DOING.  Distros, please enable this and fix whatever
+         is broken.
+
+         Conventionally, block device numbers are allocated from
+         predetermined contiguous area.  However, extended block area
+         may introduce non-contiguous block device numbers.  This
+         option forces most block device numbers to be allocated from
+         the extended space and spreads them to discover kernel or
+         userland code paths which assume predetermined contiguous
+         device number allocation.
+
+         Note that turning on this debug option shuffles all the
+         device numbers for all IDE and SCSI devices including libata
+         ones, so root partition specified using device number
+         directly (via rdev or root=MAJ:MIN) won't work anymore.
+         Textual device names (root=/dev/sdXn) will continue to work.
+
+         Say N if you are unsure.
+
+config DEBUG_FORCE_WEAK_PER_CPU
+       bool "Force weak per-cpu definitions"
+       depends on DEBUG_KERNEL
+       help
+         s390 and alpha require percpu variables in modules to be
+         defined weak to work around addressing range issue which
+         puts the following two restrictions on percpu variable
+         definitions.
+
+         1. percpu symbols must be unique whether static or not
+         2. percpu variables can't be defined inside a function
+
+         To ensure that generic code follows the above rules, this
+         option forces all percpu variables to be defined as weak.
+

 config LKDTM
        tristate "Linux Kernel Dump Test Tool Module"
        depends on DEBUG_KERNEL
 config LKDTM
        tristate "Linux Kernel Dump Test Tool Module"
        depends on DEBUG_KERNEL


@@ -660,6 +854,7 @@ config FAULT_INJECTION
 config FAILSLAB
        bool "Fault-injection capability for kmalloc"
        depends on FAULT_INJECTION
 config FAILSLAB
        bool "Fault-injection capability for kmalloc"
        depends on FAULT_INJECTION

+       depends on SLAB || SLUB

        help
          Provide fault-injection capability for kmalloc.
 
        help
          Provide fault-injection capability for kmalloc.
 


@@ -671,10 +866,21 @@ config FAIL_PAGE_ALLOC
 
 config FAIL_MAKE_REQUEST
        bool "Fault-injection capability for disk IO"
 
 config FAIL_MAKE_REQUEST
        bool "Fault-injection capability for disk IO"

-       depends on FAULT_INJECTION
+       depends on FAULT_INJECTION && BLOCK

        help
          Provide fault-injection capability for disk IO.
 
        help
          Provide fault-injection capability for disk IO.
 

+config FAIL_IO_TIMEOUT
+       bool "Faul-injection capability for faking disk interrupts"
+       depends on FAULT_INJECTION && BLOCK
+       help
+         Provide fault-injection capability on end IO handling. This
+         will make the block layer "forget" an interrupt as configured,
+         thus exercising the error handling.
+
+         Only works with drivers that use the generic timeout handling,
+         for others it wont do anything.
+

 config FAULT_INJECTION_DEBUG_FS
        bool "Debugfs entries for fault-injection capabilities"
        depends on FAULT_INJECTION && SYSFS && DEBUG_FS
 config FAULT_INJECTION_DEBUG_FS
        bool "Debugfs entries for fault-injection capabilities"
        depends on FAULT_INJECTION && SYSFS && DEBUG_FS


@@ -686,13 +892,13 @@ config FAULT_INJECTION_STACKTRACE_FILTER
        depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT
        depends on !X86_64
        select STACKTRACE
        depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT
        depends on !X86_64
        select STACKTRACE

-       select FRAME_POINTER if !PPC
+       select FRAME_POINTER if !PPC && !S390

        help
          Provide stacktrace filter for fault-injection capabilities
 
 config LATENCYTOP
        bool "Latency measuring infrastructure"
        help
          Provide stacktrace filter for fault-injection capabilities
 
 config LATENCYTOP
        bool "Latency measuring infrastructure"

-       select FRAME_POINTER if !MIPS && !PPC
+       select FRAME_POINTER if !MIPS && !PPC && !S390

        select KALLSYMS
        select KALLSYMS_ALL
        select STACKTRACE
        select KALLSYMS
        select KALLSYMS_ALL
        select STACKTRACE


@@ -711,6 +917,7 @@ config SYSCTL_SYSCALL_CHECK
          to properly maintain and use. This enables checks that help
          you to keep things correct.
 
          to properly maintain and use. This enables checks that help
          you to keep things correct.
 

+source mm/Kconfig.debug

 source kernel/trace/Kconfig
 
 config PROVIDE_OHCI1394_DMA_INIT
 source kernel/trace/Kconfig
 
 config PROVIDE_OHCI1394_DMA_INIT


@@ -753,7 +960,7 @@ config FIREWIRE_OHCI_REMOTE_DMA
 
          If unsure, say N.
 
 
          If unsure, say N.
 

-menuconfig BUILD_DOCSRC
+config BUILD_DOCSRC

        bool "Build targets in Documentation/ tree"
        depends on HEADERS_CHECK
        help
        bool "Build targets in Documentation/ tree"
        depends on HEADERS_CHECK
        help


@@ -762,6 +969,83 @@ menuconfig BUILD_DOCSRC
 
          Say N if you are unsure.
 
 
          Say N if you are unsure.
 

+config DYNAMIC_DEBUG
+       bool "Enable dynamic printk() support"
+       default n
+       depends on PRINTK
+       depends on DEBUG_FS
+       help
+
+         Compiles debug level messages into the kernel, which would not
+         otherwise be available at runtime. These messages can then be
+         enabled/disabled based on various levels of scope - per source file,
+         function, module, format string, and line number. This mechanism
+         implicitly enables all pr_debug() and dev_dbg() calls. The impact of
+         this compile option is a larger kernel text size of about 2%.
+
+         Usage:
+
+         Dynamic debugging is controlled via the 'dynamic_debug/ddebug' file,
+         which is contained in the 'debugfs' filesystem. Thus, the debugfs
+         filesystem must first be mounted before making use of this feature.
+         We refer the control file as: <debugfs>/dynamic_debug/ddebug. This
+         file contains a list of the debug statements that can be enabled. The
+         format for each line of the file is:
+
+               filename:lineno [module]function flags format
+
+         filename : source file of the debug statement
+         lineno : line number of the debug statement
+         module : module that contains the debug statement
+         function : function that contains the debug statement
+          flags : 'p' means the line is turned 'on' for printing
+          format : the format used for the debug statement
+
+         From a live system:
+
+               nullarbor:~ # cat <debugfs>/dynamic_debug/ddebug
+               # filename:lineno [module]function flags format
+               fs/aio.c:222 [aio]__put_ioctx - "__put_ioctx:\040freeing\040%p\012"
+               fs/aio.c:248 [aio]ioctx_alloc - "ENOMEM:\040nr_events\040too\040high\012"
+               fs/aio.c:1770 [aio]sys_io_cancel - "calling\040cancel\012"
+
+         Example usage:
+
+               // enable the message at line 1603 of file svcsock.c
+               nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' >
+                                               <debugfs>/dynamic_debug/ddebug
+
+               // enable all the messages in file svcsock.c
+               nullarbor:~ # echo -n 'file svcsock.c +p' >
+                                               <debugfs>/dynamic_debug/ddebug
+
+               // enable all the messages in the NFS server module
+               nullarbor:~ # echo -n 'module nfsd +p' >
+                                               <debugfs>/dynamic_debug/ddebug
+
+               // enable all 12 messages in the function svc_process()
+               nullarbor:~ # echo -n 'func svc_process +p' >
+                                               <debugfs>/dynamic_debug/ddebug
+
+               // disable all 12 messages in the function svc_process()
+               nullarbor:~ # echo -n 'func svc_process -p' >
+                                               <debugfs>/dynamic_debug/ddebug
+
+         See Documentation/dynamic-debug-howto.txt for additional information.
+
+config DMA_API_DEBUG
+       bool "Enable debugging of DMA-API usage"
+       depends on HAVE_DMA_API_DEBUG
+       help
+         Enable this option to debug the use of the DMA API by device drivers.
+         With this option you will be able to detect common bugs in device
+         drivers like double-freeing of DMA mappings or freeing mappings that
+         were never allocated.
+         This option causes a performance degredation.  Use only if you want
+         to debug device drivers. If unsure, say N.
+

 source "samples/Kconfig"
 
 source "lib/Kconfig.kgdb"
 source "samples/Kconfig"
 
 source "lib/Kconfig.kgdb"

+
+source "lib/Kconfig.kmemcheck"