+
+config RCU_TORTURE_TEST_RUNNABLE
+ bool "torture tests for RCU runnable by default"
+ depends on RCU_TORTURE_TEST = y
+ default n
+ help
+ This option provides a way to build the RCU torture tests
+ directly into the kernel without them starting up at boot
+ time. You can use /proc/sys/kernel/rcutorture_runnable
+ to manually override this setting. This /proc file is
+ available only when the RCU torture tests have been built
+ into the kernel.
+
+ Say Y here if you want the RCU torture tests to start during
+ boot (you probably don't).
+ Say N here if you want the RCU torture tests to start only
+ after being manually enabled via /proc.
+
+config RCU_CPU_STALL_DETECTOR
+ bool "Check for stalled CPUs delaying RCU grace periods"
+ depends on TREE_RCU || TREE_PREEMPT_RCU
+ default y
+ help
+ This option causes RCU to printk information on which
+ CPUs are delaying the current grace period, but only when
+ the grace period extends for excessive time periods.
+
+ Say N if you want to disable such checks.
+
+ Say Y if you are unsure.
+
+config RCU_CPU_STALL_VERBOSE
+ bool "Print additional per-task information for RCU_CPU_STALL_DETECTOR"
+ depends on RCU_CPU_STALL_DETECTOR && TREE_PREEMPT_RCU
+ default y
+ help
+ This option causes RCU to printk detailed per-task information
+ for any tasks that are stalling the current RCU grace period.
+
+ Say N if you are unsure.
+
+ Say Y if you want to enable such checks.
+
+config KPROBES_SANITY_TEST
+ bool "Kprobes sanity tests"
+ depends on DEBUG_KERNEL
+ depends on KPROBES
+ default n
+ help
+ This option provides for testing basic kprobes functionality on
+ boot. A sample kprobe, jprobe and kretprobe are inserted and
+ verified for functionality.
+
+ Say N if you are unsure.
+
+config BACKTRACE_SELF_TEST
+ tristate "Self test for the backtrace code"
+ depends on DEBUG_KERNEL
+ default n
+ help
+ This option provides a kernel module that can be used to test
+ the kernel stack backtrace code. This option is not useful
+ for distributions or general kernels, but only for kernel
+ developers working on architecture code.
+
+ Note that if you want to also test saved backtraces, you will
+ have to enable STACKTRACE as well.
+
+ Say N if you are unsure.
+
+config DEBUG_BLOCK_EXT_DEVT
+ bool "Force extended block device numbers and spread them"
+ depends on DEBUG_KERNEL
+ depends on BLOCK
+ default n
+ help
+ BIG FAT WARNING: ENABLING THIS OPTION MIGHT BREAK BOOTING ON
+ SOME DISTRIBUTIONS. DO NOT ENABLE THIS UNLESS YOU KNOW WHAT
+ YOU ARE DOING. Distros, please enable this and fix whatever
+ is broken.
+
+ Conventionally, block device numbers are allocated from
+ predetermined contiguous area. However, extended block area
+ may introduce non-contiguous block device numbers. This
+ option forces most block device numbers to be allocated from
+ the extended space and spreads them to discover kernel or
+ userland code paths which assume predetermined contiguous
+ device number allocation.
+
+ Note that turning on this debug option shuffles all the
+ device numbers for all IDE and SCSI devices including libata
+ ones, so root partition specified using device number
+ directly (via rdev or root=MAJ:MIN) won't work anymore.
+ Textual device names (root=/dev/sdXn) will continue to work.
+
+ Say N if you are unsure.
+
+config DEBUG_FORCE_WEAK_PER_CPU
+ bool "Force weak per-cpu definitions"
+ depends on DEBUG_KERNEL
+ help
+ s390 and alpha require percpu variables in modules to be
+ defined weak to work around addressing range issue which
+ puts the following two restrictions on percpu variable
+ definitions.
+
+ 1. percpu symbols must be unique whether static or not
+ 2. percpu variables can't be defined inside a function
+
+ To ensure that generic code follows the above rules, this
+ option forces all percpu variables to be defined as weak.
+
+config LKDTM
+ tristate "Linux Kernel Dump Test Tool Module"
+ depends on DEBUG_FS
+ depends on BLOCK
+ default n
+ help
+ This module enables testing of the different dumping mechanisms by
+ inducing system failures at predefined crash points.
+ If you don't need it: say N
+ Choose M here to compile this code as a module. The module will be
+ called lkdtm.
+
+ Documentation on how to use the module can be found in
+ Documentation/fault-injection/provoke-crashes.txt
+
+config FAULT_INJECTION
+ bool "Fault-injection framework"
+ depends on DEBUG_KERNEL
+ help
+ Provide fault-injection framework.
+ For more details, see Documentation/fault-injection/.
+
+config FAILSLAB
+ bool "Fault-injection capability for kmalloc"
+ depends on FAULT_INJECTION
+ depends on SLAB || SLUB
+ help
+ Provide fault-injection capability for kmalloc.
+
+config FAIL_PAGE_ALLOC
+ bool "Fault-injection capabilitiy for alloc_pages()"
+ depends on FAULT_INJECTION
+ help
+ Provide fault-injection capability for alloc_pages().
+
+config FAIL_MAKE_REQUEST
+ bool "Fault-injection capability for disk IO"
+ depends on FAULT_INJECTION && BLOCK
+ help
+ Provide fault-injection capability for disk IO.
+
+config FAIL_IO_TIMEOUT
+ bool "Faul-injection capability for faking disk interrupts"
+ depends on FAULT_INJECTION && BLOCK
+ help
+ Provide fault-injection capability on end IO handling. This
+ will make the block layer "forget" an interrupt as configured,
+ thus exercising the error handling.
+
+ Only works with drivers that use the generic timeout handling,
+ for others it wont do anything.
+
+config FAULT_INJECTION_DEBUG_FS
+ bool "Debugfs entries for fault-injection capabilities"
+ depends on FAULT_INJECTION && SYSFS && DEBUG_FS
+ help
+ Enable configuration of fault-injection capabilities via debugfs.
+
+config FAULT_INJECTION_STACKTRACE_FILTER
+ bool "stacktrace filter for fault-injection capabilities"
+ depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT
+ depends on !X86_64
+ select STACKTRACE
+ select FRAME_POINTER if !PPC && !S390
+ help
+ Provide stacktrace filter for fault-injection capabilities
+
+config LATENCYTOP
+ bool "Latency measuring infrastructure"
+ select FRAME_POINTER if !MIPS && !PPC && !S390
+ select KALLSYMS
+ select KALLSYMS_ALL
+ select STACKTRACE
+ select SCHEDSTATS
+ select SCHED_DEBUG
+ depends on HAVE_LATENCYTOP_SUPPORT
+ help
+ Enable this option if you want to use the LatencyTOP tool
+ to find out which userspace is blocking on what kernel operations.
+
+config SYSCTL_SYSCALL_CHECK
+ bool "Sysctl checks"
+ depends on SYSCTL
+ ---help---
+ sys_sysctl uses binary paths that have been found challenging
+ to properly maintain and use. This enables checks that help
+ you to keep things correct.
+
+source mm/Kconfig.debug
+source kernel/trace/Kconfig
+
+config PROVIDE_OHCI1394_DMA_INIT
+ bool "Remote debugging over FireWire early on boot"
+ depends on PCI && X86
+ help
+ If you want to debug problems which hang or crash the kernel early
+ on boot and the crashing machine has a FireWire port, you can use
+ this feature to remotely access the memory of the crashed machine
+ over FireWire. This employs remote DMA as part of the OHCI1394
+ specification which is now the standard for FireWire controllers.
+
+ With remote DMA, you can monitor the printk buffer remotely using
+ firescope and access all memory below 4GB using fireproxy from gdb.
+ Even controlling a kernel debugger is possible using remote DMA.
+
+ Usage:
+
+ If ohci1394_dma=early is used as boot parameter, it will initialize
+ all OHCI1394 controllers which are found in the PCI config space.
+
+ As all changes to the FireWire bus such as enabling and disabling
+ devices cause a bus reset and thereby disable remote DMA for all
+ devices, be sure to have the cable plugged and FireWire enabled on
+ the debugging host before booting the debug target for debugging.
+
+ This code (~1k) is freed after boot. By then, the firewire stack
+ in charge of the OHCI-1394 controllers should be used instead.
+
+ See Documentation/debugging-via-ohci1394.txt for more information.
+
+config FIREWIRE_OHCI_REMOTE_DMA
+ bool "Remote debugging over FireWire with firewire-ohci"
+ depends on FIREWIRE_OHCI
+ help
+ This option lets you use the FireWire bus for remote debugging
+ with help of the firewire-ohci driver. It enables unfiltered
+ remote DMA in firewire-ohci.
+ See Documentation/debugging-via-ohci1394.txt for more information.
+
+ If unsure, say N.
+
+config BUILD_DOCSRC
+ bool "Build targets in Documentation/ tree"
+ depends on HEADERS_CHECK
+ help
+ This option attempts to build objects from the source files in the
+ kernel Documentation/ tree.
+
+ Say N if you are unsure.
+
+config DYNAMIC_DEBUG
+ bool "Enable dynamic printk() support"
+ default n
+ depends on PRINTK
+ depends on DEBUG_FS
+ help
+
+ Compiles debug level messages into the kernel, which would not
+ otherwise be available at runtime. These messages can then be
+ enabled/disabled based on various levels of scope - per source file,
+ function, module, format string, and line number. This mechanism
+ implicitly enables all pr_debug() and dev_dbg() calls. The impact of
+ this compile option is a larger kernel text size of about 2%.
+
+ Usage:
+
+ Dynamic debugging is controlled via the 'dynamic_debug/control' file,
+ which is contained in the 'debugfs' filesystem. Thus, the debugfs
+ filesystem must first be mounted before making use of this feature.
+ We refer the control file as: <debugfs>/dynamic_debug/control. This
+ file contains a list of the debug statements that can be enabled. The
+ format for each line of the file is:
+
+ filename:lineno [module]function flags format
+
+ filename : source file of the debug statement
+ lineno : line number of the debug statement
+ module : module that contains the debug statement
+ function : function that contains the debug statement
+ flags : 'p' means the line is turned 'on' for printing
+ format : the format used for the debug statement
+
+ From a live system:
+
+ nullarbor:~ # cat <debugfs>/dynamic_debug/control
+ # filename:lineno [module]function flags format
+ fs/aio.c:222 [aio]__put_ioctx - "__put_ioctx:\040freeing\040%p\012"
+ fs/aio.c:248 [aio]ioctx_alloc - "ENOMEM:\040nr_events\040too\040high\012"
+ fs/aio.c:1770 [aio]sys_io_cancel - "calling\040cancel\012"
+
+ Example usage:
+
+ // enable the message at line 1603 of file svcsock.c
+ nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' >
+ <debugfs>/dynamic_debug/control
+
+ // enable all the messages in file svcsock.c
+ nullarbor:~ # echo -n 'file svcsock.c +p' >
+ <debugfs>/dynamic_debug/control
+
+ // enable all the messages in the NFS server module
+ nullarbor:~ # echo -n 'module nfsd +p' >
+ <debugfs>/dynamic_debug/control
+
+ // enable all 12 messages in the function svc_process()
+ nullarbor:~ # echo -n 'func svc_process +p' >
+ <debugfs>/dynamic_debug/control
+
+ // disable all 12 messages in the function svc_process()
+ nullarbor:~ # echo -n 'func svc_process -p' >
+ <debugfs>/dynamic_debug/control
+
+ See Documentation/dynamic-debug-howto.txt for additional information.
+
+config DMA_API_DEBUG
+ bool "Enable debugging of DMA-API usage"
+ depends on HAVE_DMA_API_DEBUG
+ help
+ Enable this option to debug the use of the DMA API by device drivers.
+ With this option you will be able to detect common bugs in device
+ drivers like double-freeing of DMA mappings or freeing mappings that
+ were never allocated.
+ This option causes a performance degredation. Use only if you want
+ to debug device drivers. If unsure, say N.
+
+config ATOMIC64_SELFTEST
+ bool "Perform an atomic64_t self-test at boot"
+ help
+ Enable this option to test the atomic64_t functions at boot.
+
+ If unsure, say N.
+
+source "samples/Kconfig"
+
+source "lib/Kconfig.kgdb"
+
+source "lib/Kconfig.kmemcheck"
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff