-/******************************************************************/
-
-/*
- * The current time
- * wall_to_monotonic is what we need to add to xtime (or xtime corrected
- * for sub jiffie times) to get to monotonic time. Monotonic is pegged
- * at zero at system boot time, so wall_to_monotonic will be negative,
- * however, we will ALWAYS keep the tv_nsec part positive so we can use
- * the usual normalization.
- */
-struct timespec xtime __attribute__ ((aligned (16)));
-struct timespec wall_to_monotonic __attribute__ ((aligned (16)));
-
-EXPORT_SYMBOL(xtime);
-
-
-/* XXX - all of this timekeeping code should be later moved to time.c */
-#include <linux/clocksource.h>
-static struct clocksource *clock; /* pointer to current clocksource */
-
-#ifdef CONFIG_GENERIC_TIME
-/**
- * __get_nsec_offset - Returns nanoseconds since last call to periodic_hook
- *
- * private function, must hold xtime_lock lock when being
- * called. Returns the number of nanoseconds since the
- * last call to update_wall_time() (adjusted by NTP scaling)
- */
-static inline s64 __get_nsec_offset(void)
-{
- cycle_t cycle_now, cycle_delta;
- s64 ns_offset;
-
- /* read clocksource: */
- cycle_now = clocksource_read(clock);
-
- /* calculate the delta since the last update_wall_time: */
- cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;
-
- /* convert to nanoseconds: */
- ns_offset = cyc2ns(clock, cycle_delta);
-
- return ns_offset;
-}
-
-/**
- * __get_realtime_clock_ts - Returns the time of day in a timespec
- * @ts: pointer to the timespec to be set
- *
- * Returns the time of day in a timespec. Used by
- * do_gettimeofday() and get_realtime_clock_ts().
- */
-static inline void __get_realtime_clock_ts(struct timespec *ts)
-{
- unsigned long seq;
- s64 nsecs;
-
- do {
- seq = read_seqbegin(&xtime_lock);
-
- *ts = xtime;
- nsecs = __get_nsec_offset();
-
- } while (read_seqretry(&xtime_lock, seq));
-
- timespec_add_ns(ts, nsecs);
-}
-
-/**
- * getnstimeofday - Returns the time of day in a timespec
- * @ts: pointer to the timespec to be set
- *
- * Returns the time of day in a timespec.
- */
-void getnstimeofday(struct timespec *ts)
-{
- __get_realtime_clock_ts(ts);
-}
-
-EXPORT_SYMBOL(getnstimeofday);
-
-/**
- * do_gettimeofday - Returns the time of day in a timeval
- * @tv: pointer to the timeval to be set
- *
- * NOTE: Users should be converted to using get_realtime_clock_ts()
- */
-void do_gettimeofday(struct timeval *tv)
-{
- struct timespec now;
-
- __get_realtime_clock_ts(&now);
- tv->tv_sec = now.tv_sec;
- tv->tv_usec = now.tv_nsec/1000;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-/**
- * do_settimeofday - Sets the time of day
- * @tv: pointer to the timespec variable containing the new time
- *
- * Sets the time of day to the new time and update NTP and notify hrtimers
- */
-int do_settimeofday(struct timespec *tv)
-{
- unsigned long flags;
- time_t wtm_sec, sec = tv->tv_sec;
- long wtm_nsec, nsec = tv->tv_nsec;
-
- if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
- return -EINVAL;
-
- write_seqlock_irqsave(&xtime_lock, flags);
-
- nsec -= __get_nsec_offset();
-
- wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
- wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
- set_normalized_timespec(&xtime, sec, nsec);
- set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
- clock->error = 0;
- ntp_clear();
-
- update_vsyscall(&xtime, clock);
-
- write_sequnlock_irqrestore(&xtime_lock, flags);
-
- /* signal hrtimers about time change */
- clock_was_set();
-
- return 0;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-
-/**
- * change_clocksource - Swaps clocksources if a new one is available
- *
- * Accumulates current time interval and initializes new clocksource
- */
-static void change_clocksource(void)
-{
- struct clocksource *new;
- cycle_t now;
- u64 nsec;
-
- new = clocksource_get_next();
-
- if (clock == new)
- return;
-
- now = clocksource_read(new);
- nsec = __get_nsec_offset();
- timespec_add_ns(&xtime, nsec);
-
- clock = new;
- clock->cycle_last = now;
-
- clock->error = 0;
- clock->xtime_nsec = 0;
- clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
-
- tick_clock_notify();
-
- printk(KERN_INFO "Time: %s clocksource has been installed.\n",
- clock->name);
-}
-#else
-static inline void change_clocksource(void) { }
-#endif
-
-/**
- * timekeeping_is_continuous - check to see if timekeeping is free running
- */
-int timekeeping_is_continuous(void)
-{
- unsigned long seq;
- int ret;
-
- do {
- seq = read_seqbegin(&xtime_lock);
-
- ret = clock->flags & CLOCK_SOURCE_VALID_FOR_HRES;
-
- } while (read_seqretry(&xtime_lock, seq));
-
- return ret;
-}
-
-/**
- * read_persistent_clock - Return time in seconds from the persistent clock.
- *
- * Weak dummy function for arches that do not yet support it.
- * Returns seconds from epoch using the battery backed persistent clock.
- * Returns zero if unsupported.
- *
- * XXX - Do be sure to remove it once all arches implement it.
- */
-unsigned long __attribute__((weak)) read_persistent_clock(void)
-{
- return 0;
-}
-
-/*
- * timekeeping_init - Initializes the clocksource and common timekeeping values
- */
-void __init timekeeping_init(void)
-{
- unsigned long flags;
- unsigned long sec = read_persistent_clock();
-
- write_seqlock_irqsave(&xtime_lock, flags);
-
- ntp_clear();
-
- clock = clocksource_get_next();
- clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
- clock->cycle_last = clocksource_read(clock);
-
- xtime.tv_sec = sec;
- xtime.tv_nsec = 0;
- set_normalized_timespec(&wall_to_monotonic,
- -xtime.tv_sec, -xtime.tv_nsec);
-
- write_sequnlock_irqrestore(&xtime_lock, flags);
-}
-
-/* flag for if timekeeping is suspended */
-static int timekeeping_suspended;
-/* time in seconds when suspend began */
-static unsigned long timekeeping_suspend_time;
-
-/**
- * timekeeping_resume - Resumes the generic timekeeping subsystem.
- * @dev: unused
- *
- * This is for the generic clocksource timekeeping.
- * xtime/wall_to_monotonic/jiffies/etc are
- * still managed by arch specific suspend/resume code.
- */
-static int timekeeping_resume(struct sys_device *dev)
-{
- unsigned long flags;
- unsigned long now = read_persistent_clock();
-
- write_seqlock_irqsave(&xtime_lock, flags);
-
- if (now && (now > timekeeping_suspend_time)) {
- unsigned long sleep_length = now - timekeeping_suspend_time;
-
- xtime.tv_sec += sleep_length;
- wall_to_monotonic.tv_sec -= sleep_length;
- }
- /* re-base the last cycle value */
- clock->cycle_last = clocksource_read(clock);
- clock->error = 0;
- timekeeping_suspended = 0;
- write_sequnlock_irqrestore(&xtime_lock, flags);
-
- touch_softlockup_watchdog();
-
- clockevents_notify(CLOCK_EVT_NOTIFY_RESUME, NULL);
-
- /* Resume hrtimers */
- hres_timers_resume();
-
- return 0;
-}
-
-static int timekeeping_suspend(struct sys_device *dev, pm_message_t state)
-{
- unsigned long flags;
-
- write_seqlock_irqsave(&xtime_lock, flags);
- timekeeping_suspended = 1;
- timekeeping_suspend_time = read_persistent_clock();
- write_sequnlock_irqrestore(&xtime_lock, flags);
-
- clockevents_notify(CLOCK_EVT_NOTIFY_SUSPEND, NULL);
-
- return 0;
-}
-
-/* sysfs resume/suspend bits for timekeeping */
-static struct sysdev_class timekeeping_sysclass = {
- .resume = timekeeping_resume,
- .suspend = timekeeping_suspend,
- set_kset_name("timekeeping"),
-};
-
-static struct sys_device device_timer = {
- .id = 0,
- .cls = &timekeeping_sysclass,
-};
-
-static int __init timekeeping_init_device(void)