-config SUNRPC
- tristate
-
-config SUNRPC_GSS
- tristate
-
-config SUNRPC_XPRT_RDMA
- tristate
- depends on SUNRPC && INFINIBAND && EXPERIMENTAL
- default SUNRPC && INFINIBAND
- help
- This option enables an RPC client transport capability that
- allows the NFS client to mount servers via an RDMA-enabled
- transport.
-
- To compile RPC client RDMA transport support as a module,
- choose M here: the module will be called xprtrdma.
-
- If unsure, say N.
-
-config SUNRPC_REGISTER_V4
- bool "Register local RPC services via rpcbind v4 (EXPERIMENTAL)"
- depends on SUNRPC && EXPERIMENTAL
- default n
- help
- Sun added support for registering RPC services at an IPv6
- address by creating two new versions of the rpcbind protocol
- (RFC 1833).
-
- This option enables support in the kernel RPC server for
- registering kernel RPC services via version 4 of the rpcbind
- protocol. If you enable this option, you must run a portmapper
- daemon that supports rpcbind protocol version 4.
-
- Serving NFS over IPv6 from knfsd (the kernel's NFS server)
- requires that you enable this option and use a portmapper that
- supports rpcbind version 4.
-
- If unsure, say N to get traditional behavior (register kernel
- RPC services using only rpcbind version 2). Distributions
- using the legacy Linux portmapper daemon must say N here.
-
-config RPCSEC_GSS_KRB5
- tristate "Secure RPC: Kerberos V mechanism (EXPERIMENTAL)"
- depends on SUNRPC && EXPERIMENTAL
- select SUNRPC_GSS
- select CRYPTO
- select CRYPTO_MD5
- select CRYPTO_DES
- select CRYPTO_CBC
- help
- Choose Y here to enable Secure RPC using the Kerberos version 5
- GSS-API mechanism (RFC 1964).
-
- Secure RPC calls with Kerberos require an auxiliary user-space
- daemon which may be found in the Linux nfs-utils package
- available from http://linux-nfs.org/. In addition, user-space
- Kerberos support should be installed.
-
- If unsure, say N.
-
-config RPCSEC_GSS_SPKM3
- tristate "Secure RPC: SPKM3 mechanism (EXPERIMENTAL)"
- depends on SUNRPC && EXPERIMENTAL
- select SUNRPC_GSS
- select CRYPTO
- select CRYPTO_MD5
- select CRYPTO_DES
- select CRYPTO_CAST5
- select CRYPTO_CBC
- help
- Choose Y here to enable Secure RPC using the SPKM3 public key
- GSS-API mechansim (RFC 2025).
-
- Secure RPC calls with SPKM3 require an auxiliary userspace
- daemon which may be found in the Linux nfs-utils package
- available from http://linux-nfs.org/.
-
- If unsure, say N.
-
-config SMB_FS
- tristate "SMB file system support (OBSOLETE, please use CIFS)"
- depends on INET
- select NLS
- help
- SMB (Server Message Block) is the protocol Windows for Workgroups
- (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share
- files and printers over local networks. Saying Y here allows you to
- mount their file systems (often called "shares" in this context) and
- access them just like any other Unix directory. Currently, this
- works only if the Windows machines use TCP/IP as the underlying
- transport protocol, and not NetBEUI. For details, read
- <file:Documentation/filesystems/smbfs.txt> and the SMB-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
- Note: if you just want your box to act as an SMB *server* and make
- files and printing services available to Windows clients (which need
- to have a TCP/IP stack), you don't need to say Y here; you can use
- the program SAMBA (available from <ftp://ftp.samba.org/pub/samba/>)
- for that.
-
- General information about how to connect Linux, Windows machines and
- Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
-
- To compile the SMB support as a module, choose M here:
- the module will be called smbfs. Most people say N, however.
-
-config SMB_NLS_DEFAULT
- bool "Use a default NLS"
- depends on SMB_FS
- help
- Enabling this will make smbfs use nls translations by default. You
- need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls
- settings and you need to give the default nls for the SMB server as
- CONFIG_SMB_NLS_REMOTE.
-
- The nls settings can be changed at mount time, if your smbmount
- supports that, using the codepage and iocharset parameters.
-
- smbmount from samba 2.2.0 or later supports this.
-
-config SMB_NLS_REMOTE
- string "Default Remote NLS Option"
- depends on SMB_NLS_DEFAULT
- default "cp437"
- help
- This setting allows you to specify a default value for which
- codepage the server uses. If this field is left blank no
- translations will be done by default. The local codepage/charset
- default to CONFIG_NLS_DEFAULT.
-
- The nls settings can be changed at mount time, if your smbmount
- supports that, using the codepage and iocharset parameters.
-
- smbmount from samba 2.2.0 or later supports this.
-
-config CIFS
- tristate "CIFS support (advanced network filesystem, SMBFS successor)"
- depends on INET
- select NLS
- help
- This is the client VFS module for the Common Internet File System
- (CIFS) protocol which is the successor to the Server Message Block
- (SMB) protocol, the native file sharing mechanism for most early
- PC operating systems. The CIFS protocol is fully supported by
- file servers such as Windows 2000 (including Windows 2003, NT 4
- and Windows XP) as well by Samba (which provides excellent CIFS
- server support for Linux and many other operating systems). Limited
- support for OS/2 and Windows ME and similar servers is provided as
- well.
-
- The cifs module provides an advanced network file system
- client for mounting to CIFS compliant servers. It includes
- support for DFS (hierarchical name space), secure per-user
- session establishment via Kerberos or NTLM or NTLMv2,
- safe distributed caching (oplock), optional packet
- signing, Unicode and other internationalization improvements.
- If you need to mount to Samba or Windows from this machine, say Y.
-
-config CIFS_STATS
- bool "CIFS statistics"
- depends on CIFS
- help
- Enabling this option will cause statistics for each server share
- mounted by the cifs client to be displayed in /proc/fs/cifs/Stats
-
-config CIFS_STATS2
- bool "Extended statistics"
- depends on CIFS_STATS
- help
- Enabling this option will allow more detailed statistics on SMB
- request timing to be displayed in /proc/fs/cifs/DebugData and also
- allow optional logging of slow responses to dmesg (depending on the
- value of /proc/fs/cifs/cifsFYI, see fs/cifs/README for more details).
- These additional statistics may have a minor effect on performance
- and memory utilization.
-
- Unless you are a developer or are doing network performance analysis
- or tuning, say N.
-
-config CIFS_WEAK_PW_HASH
- bool "Support legacy servers which use weaker LANMAN security"
- depends on CIFS
- help
- Modern CIFS servers including Samba and most Windows versions
- (since 1997) support stronger NTLM (and even NTLMv2 and Kerberos)
- security mechanisms. These hash the password more securely
- than the mechanisms used in the older LANMAN version of the
- SMB protocol but LANMAN based authentication is needed to
- establish sessions with some old SMB servers.
-
- Enabling this option allows the cifs module to mount to older
- LANMAN based servers such as OS/2 and Windows 95, but such
- mounts may be less secure than mounts using NTLM or more recent
- security mechanisms if you are on a public network. Unless you
- have a need to access old SMB servers (and are on a private
- network) you probably want to say N. Even if this support
- is enabled in the kernel build, LANMAN authentication will not be
- used automatically. At runtime LANMAN mounts are disabled but
- can be set to required (or optional) either in
- /proc/fs/cifs (see fs/cifs/README for more detail) or via an
- option on the mount command. This support is disabled by
- default in order to reduce the possibility of a downgrade
- attack.
-
- If unsure, say N.
-
-config CIFS_UPCALL
- bool "Kerberos/SPNEGO advanced session setup"
- depends on CIFS && KEYS
- help
- Enables an upcall mechanism for CIFS which accesses
- userspace helper utilities to provide SPNEGO packaged (RFC 4178)
- Kerberos tickets which are needed to mount to certain secure servers
- (for which more secure Kerberos authentication is required). If
- unsure, say N.
-
-config CIFS_XATTR
- bool "CIFS extended attributes"
- depends on CIFS
- help
- Extended attributes are name:value pairs associated with inodes by
- the kernel or by users (see the attr(5) manual page, or visit
- <http://acl.bestbits.at/> for details). CIFS maps the name of
- extended attributes beginning with the user namespace prefix
- to SMB/CIFS EAs. EAs are stored on Windows servers without the
- user namespace prefix, but their names are seen by Linux cifs clients
- prefaced by the user namespace prefix. The system namespace
- (used by some filesystems to store ACLs) is not supported at
- this time.
-
- If unsure, say N.
-
-config CIFS_POSIX
- bool "CIFS POSIX Extensions"
- depends on CIFS_XATTR
- help
- Enabling this option will cause the cifs client to attempt to
- negotiate a newer dialect with servers, such as Samba 3.0.5
- or later, that optionally can handle more POSIX like (rather
- than Windows like) file behavior. It also enables
- support for POSIX ACLs (getfacl and setfacl) to servers
- (such as Samba 3.10 and later) which can negotiate
- CIFS POSIX ACL support. If unsure, say N.
-
-config CIFS_DEBUG2
- bool "Enable additional CIFS debugging routines"
- depends on CIFS
- help
- Enabling this option adds a few more debugging routines
- to the cifs code which slightly increases the size of
- the cifs module and can cause additional logging of debug
- messages in some error paths, slowing performance. This
- option can be turned off unless you are debugging
- cifs problems. If unsure, say N.
-
-config CIFS_EXPERIMENTAL
- bool "CIFS Experimental Features (EXPERIMENTAL)"
- depends on CIFS && EXPERIMENTAL
- help
- Enables cifs features under testing. These features are
- experimental and currently include DFS support and directory
- change notification ie fcntl(F_DNOTIFY), as well as the upcall
- mechanism which will be used for Kerberos session negotiation
- and uid remapping. Some of these features also may depend on
- setting a value of 1 to the pseudo-file /proc/fs/cifs/Experimental
- (which is disabled by default). See the file fs/cifs/README
- for more details. If unsure, say N.
-
-config CIFS_DFS_UPCALL
- bool "DFS feature support (EXPERIMENTAL)"
- depends on CIFS_EXPERIMENTAL
- depends on KEYS
- help
- Enables an upcall mechanism for CIFS which contacts userspace
- helper utilities to provide server name resolution (host names to
- IP addresses) which is needed for implicit mounts of DFS junction
- points. If unsure, say N.
-
-config NCP_FS
- tristate "NCP file system support (to mount NetWare volumes)"
- depends on IPX!=n || INET
- help
- NCP (NetWare Core Protocol) is a protocol that runs over IPX and is
- used by Novell NetWare clients to talk to file servers. It is to
- IPX what NFS is to TCP/IP, if that helps. Saying Y here allows you
- to mount NetWare file server volumes and to access them just like
- any other Unix directory. For details, please read the file
- <file:Documentation/filesystems/ncpfs.txt> in the kernel source and
- the IPX-HOWTO from <http://www.tldp.org/docs.html#howto>.
-
- You do not have to say Y here if you want your Linux box to act as a
- file *server* for Novell NetWare clients.
-
- General information about how to connect Linux, Windows machines and
- Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
-
- To compile this as a module, choose M here: the module will be called
- ncpfs. Say N unless you are connected to a Novell network.
-