+
+ case rx_8025:
+ tmp = i2c_smbus_read_i2c_block_data(ds1307->client,
+ RX8025_REG_CTRL1 << 4 | 0x08, 2, buf);
+ if (tmp != 2) {
+ pr_debug("read error %d\n", tmp);
+ err = -EIO;
+ goto exit_free;
+ }
+
+ /* oscillator off? turn it on, so clock can tick. */
+ if (!(ds1307->regs[1] & RX8025_BIT_XST)) {
+ ds1307->regs[1] |= RX8025_BIT_XST;
+ i2c_smbus_write_byte_data(client,
+ RX8025_REG_CTRL2 << 4 | 0x08,
+ ds1307->regs[1]);
+ dev_warn(&client->dev,
+ "oscillator stop detected - SET TIME!\n");
+ }
+
+ if (ds1307->regs[1] & RX8025_BIT_PON) {
+ ds1307->regs[1] &= ~RX8025_BIT_PON;
+ i2c_smbus_write_byte_data(client,
+ RX8025_REG_CTRL2 << 4 | 0x08,
+ ds1307->regs[1]);
+ dev_warn(&client->dev, "power-on detected\n");
+ }
+
+ if (ds1307->regs[1] & RX8025_BIT_VDET) {
+ ds1307->regs[1] &= ~RX8025_BIT_VDET;
+ i2c_smbus_write_byte_data(client,
+ RX8025_REG_CTRL2 << 4 | 0x08,
+ ds1307->regs[1]);
+ dev_warn(&client->dev, "voltage drop detected\n");
+ }
+
+ /* make sure we are running in 24hour mode */
+ if (!(ds1307->regs[0] & RX8025_BIT_2412)) {
+ u8 hour;
+
+ /* switch to 24 hour mode */
+ i2c_smbus_write_byte_data(client,
+ RX8025_REG_CTRL1 << 4 | 0x08,
+ ds1307->regs[0] |
+ RX8025_BIT_2412);
+
+ tmp = i2c_smbus_read_i2c_block_data(ds1307->client,
+ RX8025_REG_CTRL1 << 4 | 0x08, 2, buf);
+ if (tmp != 2) {
+ pr_debug("read error %d\n", tmp);
+ err = -EIO;
+ goto exit_free;
+ }
+
+ /* correct hour */
+ hour = bcd2bin(ds1307->regs[DS1307_REG_HOUR]);
+ if (hour == 12)
+ hour = 0;
+ if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM)
+ hour += 12;
+
+ i2c_smbus_write_byte_data(client,
+ DS1307_REG_HOUR << 4 | 0x08,
+ hour);
+ }
+ break;
+ case ds_1388:
+ ds1307->offset = 1; /* Seconds starts at 1 */
+ break;