+
+}
+
+/*
+ * Try to switch to new modulation mode from MIMO3
+ */
+static int rs_move_mimo3_to_other(struct iwl_priv *priv,
+ struct iwl_lq_sta *lq_sta,
+ struct ieee80211_conf *conf,
+ struct ieee80211_sta *sta, int index)
+{
+ s8 is_green = lq_sta->is_green;
+ struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+ struct iwl_scale_tbl_info *search_tbl =
+ &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
+ struct iwl_rate_scale_data *window = &(tbl->win[index]);
+ struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
+ u32 sz = (sizeof(struct iwl_scale_tbl_info) -
+ (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
+ u8 start_action = tbl->action;
+ u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
+ u8 tx_chains_num = priv->hw_params.tx_chains_num;
+ int ret;
+ u8 update_search_tbl_counter = 0;
+
+ if ((iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE) &&
+ (tbl->action < IWL_MIMO3_SWITCH_SISO_A ||
+ tbl->action > IWL_MIMO3_SWITCH_SISO_C)) {
+ /* switch in SISO */
+ tbl->action = IWL_MIMO3_SWITCH_SISO_A;
+ }
+ for (;;) {
+ lq_sta->action_counter++;
+ switch (tbl->action) {
+ case IWL_MIMO3_SWITCH_ANTENNA1:
+ case IWL_MIMO3_SWITCH_ANTENNA2:
+ IWL_DEBUG_RATE(priv, "LQ: MIMO3 toggle Antennas\n");
+
+ if (tx_chains_num <= 3)
+ break;
+
+ if (window->success_ratio >= IWL_RS_GOOD_RATIO)
+ break;
+
+ memcpy(search_tbl, tbl, sz);
+ if (rs_toggle_antenna(valid_tx_ant,
+ &search_tbl->current_rate, search_tbl))
+ goto out;
+ break;
+ case IWL_MIMO3_SWITCH_SISO_A:
+ case IWL_MIMO3_SWITCH_SISO_B:
+ case IWL_MIMO3_SWITCH_SISO_C:
+ IWL_DEBUG_RATE(priv, "LQ: MIMO3 switch to SISO\n");
+
+ /* Set up new search table for SISO */
+ memcpy(search_tbl, tbl, sz);
+
+ if (tbl->action == IWL_MIMO3_SWITCH_SISO_A)
+ search_tbl->ant_type = ANT_A;
+ else if (tbl->action == IWL_MIMO3_SWITCH_SISO_B)
+ search_tbl->ant_type = ANT_B;
+ else
+ search_tbl->ant_type = ANT_C;
+
+ if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
+ break;
+
+ ret = rs_switch_to_siso(priv, lq_sta, conf, sta,
+ search_tbl, index);
+ if (!ret)
+ goto out;
+
+ break;
+
+ case IWL_MIMO3_SWITCH_MIMO2_AB:
+ case IWL_MIMO3_SWITCH_MIMO2_AC:
+ case IWL_MIMO3_SWITCH_MIMO2_BC:
+ IWL_DEBUG_RATE(priv, "LQ: MIMO3 switch to MIMO2\n");
+
+ memcpy(search_tbl, tbl, sz);
+ search_tbl->is_SGI = 0;
+ if (tbl->action == IWL_MIMO3_SWITCH_MIMO2_AB)
+ search_tbl->ant_type = ANT_AB;
+ else if (tbl->action == IWL_MIMO3_SWITCH_MIMO2_AC)
+ search_tbl->ant_type = ANT_AC;
+ else
+ search_tbl->ant_type = ANT_BC;
+
+ if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
+ break;
+
+ ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta,
+ search_tbl, index);
+ if (!ret)
+ goto out;
+
+ break;
+
+ case IWL_MIMO3_SWITCH_GI:
+ if (!tbl->is_ht40 && !(ht_cap->cap &
+ IEEE80211_HT_CAP_SGI_20))
+ break;
+ if (tbl->is_ht40 && !(ht_cap->cap &
+ IEEE80211_HT_CAP_SGI_40))
+ break;
+
+ IWL_DEBUG_RATE(priv, "LQ: MIMO3 toggle SGI/NGI\n");
+
+ /* Set up new search table for MIMO */
+ memcpy(search_tbl, tbl, sz);
+ search_tbl->is_SGI = !tbl->is_SGI;
+ rs_set_expected_tpt_table(lq_sta, search_tbl);
+ /*
+ * If active table already uses the fastest possible
+ * modulation (dual stream with short guard interval),
+ * and it's working well, there's no need to look
+ * for a better type of modulation!
+ */
+ if (tbl->is_SGI) {
+ s32 tpt = lq_sta->last_tpt / 100;
+ if (tpt >= search_tbl->expected_tpt[index])
+ break;
+ }
+ search_tbl->current_rate =
+ rate_n_flags_from_tbl(priv, search_tbl,
+ index, is_green);
+ update_search_tbl_counter = 1;
+ goto out;
+ }
+ tbl->action++;
+ if (tbl->action > IWL_MIMO3_SWITCH_GI)
+ tbl->action = IWL_MIMO3_SWITCH_ANTENNA1;
+
+ if (tbl->action == start_action)
+ break;
+ }
+ search_tbl->lq_type = LQ_NONE;
+ return 0;