-/**
- * mac_set_cam_mask - Set a CAM mask
- * @regs: register block for this velocity
- * @mask: CAM mask to load
- * @cam_type: CAM to store
- *
- * Store a new mask into a CAM
- */
-
-static inline void mac_set_cam_mask(struct mac_regs __iomem * regs, u8 * mask, enum velocity_cam_type cam_type)
-{
- int i;
- /* Select CAM mask */
- BYTE_REG_BITS_SET(CAMCR_PS_CAM_MASK, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
-
- if (cam_type == VELOCITY_VLAN_ID_CAM)
- writeb(CAMADDR_CAMEN | CAMADDR_VCAMSL, ®s->CAMADDR);
- else
- writeb(CAMADDR_CAMEN, ®s->CAMADDR);
-
- for (i = 0; i < 8; i++) {
- writeb(*mask++, &(regs->MARCAM[i]));
- }
- /* disable CAMEN */
- writeb(0, ®s->CAMADDR);
-
- /* Select mar */
- BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
-}
-
-/**
- * mac_set_cam - set CAM data
- * @regs: register block of this velocity
- * @idx: Cam index
- * @addr: 2 or 6 bytes of CAM data
- * @cam_type: CAM to load
- *
- * Load an address or vlan tag into a CAM
- */
-
-static inline void mac_set_cam(struct mac_regs __iomem * regs, int idx, u8 *addr, enum velocity_cam_type cam_type)
-{
- int i;
-
- /* Select CAM mask */
- BYTE_REG_BITS_SET(CAMCR_PS_CAM_DATA, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
-
- idx &= (64 - 1);
-
- if (cam_type == VELOCITY_VLAN_ID_CAM)
- writeb(CAMADDR_CAMEN | CAMADDR_VCAMSL | idx, ®s->CAMADDR);
- else
- writeb(CAMADDR_CAMEN | idx, ®s->CAMADDR);
-
- if (cam_type == VELOCITY_VLAN_ID_CAM)
- writew(*((u16 *) addr), ®s->MARCAM[0]);
- else {
- for (i = 0; i < 6; i++) {
- writeb(*addr++, &(regs->MARCAM[i]));
- }
- }
- BYTE_REG_BITS_ON(CAMCR_CAMWR, ®s->CAMCR);
-
- udelay(10);
-
- writeb(0, ®s->CAMADDR);
-
- /* Select mar */
- BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
-}
-
-/**
- * mac_get_cam - fetch CAM data
- * @regs: register block of this velocity
- * @idx: Cam index
- * @addr: buffer to hold up to 6 bytes of CAM data
- * @cam_type: CAM to load
- *
- * Load an address or vlan tag from a CAM into the buffer provided by
- * the caller. VLAN tags are 2 bytes the address cam entries are 6.
- */
-
-static inline void mac_get_cam(struct mac_regs __iomem * regs, int idx, u8 *addr, enum velocity_cam_type cam_type)
-{
- int i;
-
- /* Select CAM mask */
- BYTE_REG_BITS_SET(CAMCR_PS_CAM_DATA, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
-
- idx &= (64 - 1);
-
- if (cam_type == VELOCITY_VLAN_ID_CAM)
- writeb(CAMADDR_CAMEN | CAMADDR_VCAMSL | idx, ®s->CAMADDR);
- else
- writeb(CAMADDR_CAMEN | idx, ®s->CAMADDR);
-
- BYTE_REG_BITS_ON(CAMCR_CAMRD, ®s->CAMCR);
-
- udelay(10);
-
- if (cam_type == VELOCITY_VLAN_ID_CAM)
- *((u16 *) addr) = readw(&(regs->MARCAM[0]));
- else
- for (i = 0; i < 6; i++, addr++)
- *((u8 *) addr) = readb(&(regs->MARCAM[i]));
-
- writeb(0, ®s->CAMADDR);
-
- /* Select mar */
- BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR);
-}
-
-/**
- * mac_wol_reset - reset WOL after exiting low power
- * @regs: register block of this velocity
- *
- * Called after we drop out of wake on lan mode in order to
- * reset the Wake on lan features. This function doesn't restore
- * the rest of the logic from the result of sleep/wakeup
- */
-
-static inline void mac_wol_reset(struct mac_regs __iomem * regs)
-{
-
- /* Turn off SWPTAG right after leaving power mode */
- BYTE_REG_BITS_OFF(STICKHW_SWPTAG, ®s->STICKHW);
- /* clear sticky bits */
- BYTE_REG_BITS_OFF((STICKHW_DS1 | STICKHW_DS0), ®s->STICKHW);
-
- BYTE_REG_BITS_OFF(CHIPGCR_FCGMII, ®s->CHIPGCR);
- BYTE_REG_BITS_OFF(CHIPGCR_FCMODE, ®s->CHIPGCR);
- /* disable force PME-enable */
- writeb(WOLCFG_PMEOVR, ®s->WOLCFGClr);
- /* disable power-event config bit */
- writew(0xFFFF, ®s->WOLCRClr);
- /* clear power status */
- writew(0xFFFF, ®s->WOLSRClr);
-}
-
-