+/*
+ * Change the port configuration of the device.
+ * Every user of this function must hold the port mutex.
+ */
+int mlx4_change_port_types(struct mlx4_dev *dev,
+ enum mlx4_port_type *port_types)
+{
+ int err = 0;
+ int change = 0;
+ int port;
+
+ for (port = 0; port < dev->caps.num_ports; port++) {
+ /* Change the port type only if the new type is different
+ * from the current, and not set to Auto */
+ if (port_types[port] != dev->caps.port_type[port + 1]) {
+ change = 1;
+ dev->caps.port_type[port + 1] = port_types[port];
+ }
+ }
+ if (change) {
+ mlx4_unregister_device(dev);
+ for (port = 1; port <= dev->caps.num_ports; port++) {
+ mlx4_CLOSE_PORT(dev, port);
+ err = mlx4_SET_PORT(dev, port);
+ if (err) {
+ mlx4_err(dev, "Failed to set port %d, "
+ "aborting\n", port);
+ goto out;
+ }
+ }
+ mlx4_set_port_mask(dev);
+ err = mlx4_register_device(dev);
+ }
+
+out:
+ return err;
+}
+
+static ssize_t show_port_type(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct mlx4_port_info *info = container_of(attr, struct mlx4_port_info,
+ port_attr);
+ struct mlx4_dev *mdev = info->dev;
+ char type[8];
+
+ sprintf(type, "%s",
+ (mdev->caps.port_type[info->port] == MLX4_PORT_TYPE_IB) ?
+ "ib" : "eth");
+ if (mdev->caps.possible_type[info->port] == MLX4_PORT_TYPE_AUTO)
+ sprintf(buf, "auto (%s)\n", type);
+ else
+ sprintf(buf, "%s\n", type);
+
+ return strlen(buf);
+}
+
+static ssize_t set_port_type(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct mlx4_port_info *info = container_of(attr, struct mlx4_port_info,
+ port_attr);
+ struct mlx4_dev *mdev = info->dev;
+ struct mlx4_priv *priv = mlx4_priv(mdev);
+ enum mlx4_port_type types[MLX4_MAX_PORTS];
+ enum mlx4_port_type new_types[MLX4_MAX_PORTS];
+ int i;
+ int err = 0;
+
+ if (!strcmp(buf, "ib\n"))
+ info->tmp_type = MLX4_PORT_TYPE_IB;
+ else if (!strcmp(buf, "eth\n"))
+ info->tmp_type = MLX4_PORT_TYPE_ETH;
+ else if (!strcmp(buf, "auto\n"))
+ info->tmp_type = MLX4_PORT_TYPE_AUTO;
+ else {
+ mlx4_err(mdev, "%s is not supported port type\n", buf);
+ return -EINVAL;
+ }
+
+ mlx4_stop_sense(mdev);
+ mutex_lock(&priv->port_mutex);
+ /* Possible type is always the one that was delivered */
+ mdev->caps.possible_type[info->port] = info->tmp_type;
+
+ for (i = 0; i < mdev->caps.num_ports; i++) {
+ types[i] = priv->port[i+1].tmp_type ? priv->port[i+1].tmp_type :
+ mdev->caps.possible_type[i+1];
+ if (types[i] == MLX4_PORT_TYPE_AUTO)
+ types[i] = mdev->caps.port_type[i+1];
+ }
+
+ if (!(mdev->caps.flags & MLX4_DEV_CAP_FLAG_DPDP)) {
+ for (i = 1; i <= mdev->caps.num_ports; i++) {
+ if (mdev->caps.possible_type[i] == MLX4_PORT_TYPE_AUTO) {
+ mdev->caps.possible_type[i] = mdev->caps.port_type[i];
+ err = -EINVAL;
+ }
+ }
+ }
+ if (err) {
+ mlx4_err(mdev, "Auto sensing is not supported on this HCA. "
+ "Set only 'eth' or 'ib' for both ports "
+ "(should be the same)\n");
+ goto out;
+ }
+
+ mlx4_do_sense_ports(mdev, new_types, types);
+
+ err = mlx4_check_port_params(mdev, new_types);
+ if (err)
+ goto out;
+
+ /* We are about to apply the changes after the configuration
+ * was verified, no need to remember the temporary types
+ * any more */
+ for (i = 0; i < mdev->caps.num_ports; i++)
+ priv->port[i + 1].tmp_type = 0;
+
+ err = mlx4_change_port_types(mdev, new_types);
+
+out:
+ mlx4_start_sense(mdev);
+ mutex_unlock(&priv->port_mutex);
+ return err ? err : count;
+}
+
+static int mlx4_load_fw(struct mlx4_dev *dev)