- /* Note we put the device back into Read Mode BEFORE going into Auto
- * Select Mode, as some devices support nesting of modes, others
- * don't. This way should always work.
- * On cmdset 0001 the writes of 0xaa and 0x55 are not needed, and
- * so should be treated as nops or illegal (and so put the device
- * back into Read Mode, which is a nop in this case).
- */
- cfi_send_gen_cmd(0xf0, 0, base, map, cfi, cfi->device_type, NULL);
- cfi_send_gen_cmd(0xaa, 0x555, base, map, cfi, cfi->device_type, NULL);
- cfi_send_gen_cmd(0x55, 0x2aa, base, map, cfi, cfi->device_type, NULL);
- cfi_send_gen_cmd(0x90, 0x555, base, map, cfi, cfi->device_type, NULL);
- cfi->mfr = cfi_read_query16(map, base);
- cfi->id = cfi_read_query16(map, base + ofs_factor);
-
- /* Get AMD/Spansion extended JEDEC ID */
- if (cfi->mfr == CFI_MFR_AMD && (cfi->id & 0xff) == 0x7e)
- cfi->id = cfi_read_query(map, base + 0xe * ofs_factor) << 8 |
- cfi_read_query(map, base + 0xf * ofs_factor);
-
- /* Put it back into Read Mode */
- cfi_qry_mode_off(base, map, cfi);
- xip_allowed(base, map);
-