ad525x_dpot: add support for ADN2860 and AD528x pots

[safe/jmp/linux-2.6] / drivers / misc / Kconfig

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 3949a1c..233886d 100644 (file)
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -13,13 +13,53 @@ menuconfig MISC_DEVICES
 
 if MISC_DEVICES
 
 
 if MISC_DEVICES
 

+config AD525X_DPOT
+       tristate "Analog Devices Digital Potentiometers"
+       depends on (I2C || SPI) && SYSFS
+       help
+         If you say yes here, you get support for the Analog Devices
+         AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255
+         AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203,
+         AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235,
+         AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293,
+         AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242,
+         AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282,
+         ADN2860
+         digital potentiometer chips.
+
+         See Documentation/misc-devices/ad525x_dpot.txt for the
+         userspace interface.
+
+         This driver can also be built as a module.  If so, the module
+         will be called ad525x_dpot.
+
+config AD525X_DPOT_I2C
+       tristate "support I2C bus connection"
+       depends on AD525X_DPOT && I2C
+       help
+         Say Y here if you have a digital potentiometers hooked to an I2C bus.
+
+         To compile this driver as a module, choose M here: the
+         module will be called ad525x_dpot-i2c.
+
+config AD525X_DPOT_SPI
+       tristate "support SPI bus connection"
+       depends on AD525X_DPOT && SPI_MASTER
+       help
+         Say Y here if you have a digital potentiometers hooked to an SPI bus.
+
+         If unsure, say N (but it's safe to say "Y").
+
+         To compile this driver as a module, choose M here: the
+         module will be called ad525x_dpot-spi.
+

 config ATMEL_PWM
        tristate "Atmel AT32/AT91 PWM support"
        depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9
        help
          This option enables device driver support for the PWM channels
 config ATMEL_PWM
        tristate "Atmel AT32/AT91 PWM support"
        depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9
        help
          This option enables device driver support for the PWM channels

-         on certain Atmel prcoessors.  Pulse Width Modulation is used for
-         purposes including software controlled power-efficent backlights
+         on certain Atmel processors.  Pulse Width Modulation is used for
+         purposes including software controlled power-efficient backlights

          on LCD displays, motor control, and waveform generation.
 
 config ATMEL_TCLIB
          on LCD displays, motor control, and waveform generation.
 
 config ATMEL_TCLIB


@@ -87,14 +127,6 @@ config PHANTOM
          If you choose to build module, its name will be phantom. If unsure,
          say N here.
 
          If you choose to build module, its name will be phantom. If unsure,
          say N here.
 

-config EEPROM_93CX6
-       tristate "EEPROM 93CX6 support"
-       ---help---
-         This is a driver for the EEPROM chipsets 93c46 and 93c66.
-         The driver supports both read as well as write commands.
-
-         If unsure, say N.
-

 config SGI_IOC4
        tristate "SGI IOC4 Base IO support"
        depends on PCI
 config SGI_IOC4
        tristate "SGI IOC4 Base IO support"
        depends on PCI


@@ -120,7 +152,7 @@ config TIFM_CORE
          cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD
          Interface support (MMC_TIFM_SD)'.
 
          cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD
          Interface support (MMC_TIFM_SD)'.
 

-          To compile this driver as a module, choose M here: the module will
+         To compile this driver as a module, choose M here: the module will

          be called tifm_core.
 
 config TIFM_7XX1
          be called tifm_core.
 
 config TIFM_7XX1


@@ -133,100 +165,9 @@ config TIFM_7XX1
          To make actual use of the device, you will have to select some
          flash card format drivers, as outlined in the TIFM_CORE Help.
 
          To make actual use of the device, you will have to select some
          flash card format drivers, as outlined in the TIFM_CORE Help.
 

-          To compile this driver as a module, choose M here: the module will
+         To compile this driver as a module, choose M here: the module will

          be called tifm_7xx1.
 
          be called tifm_7xx1.
 

-config ACER_WMI
-        tristate "Acer WMI Laptop Extras (EXPERIMENTAL)"
-       depends on X86
-       depends on EXPERIMENTAL
-       depends on ACPI
-       depends on LEDS_CLASS
-       depends on NEW_LEDS
-       depends on BACKLIGHT_CLASS_DEVICE
-       depends on SERIO_I8042
-       depends on RFKILL
-       select ACPI_WMI
-       ---help---
-         This is a driver for newer Acer (and Wistron) laptops. It adds
-         wireless radio and bluetooth control, and on some laptops,
-         exposes the mail LED and LCD backlight.
-
-         For more information about this driver see
-         <file:Documentation/laptops/acer-wmi.txt>
-
-         If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
-         here.
-
-config ASUS_LAPTOP
-        tristate "Asus Laptop Extras (EXPERIMENTAL)"
-        depends on X86
-        depends on ACPI
-       depends on EXPERIMENTAL && !ACPI_ASUS
-       depends on LEDS_CLASS
-       depends on NEW_LEDS
-       depends on BACKLIGHT_CLASS_DEVICE
-        ---help---
-         This is the new Linux driver for Asus laptops. It may also support some
-         MEDION, JVC or VICTOR laptops. It makes all the extra buttons generate
-         standard ACPI events that go through /proc/acpi/events. It also adds
-         support for video output switching, LCD backlight control, Bluetooth and
-         Wlan control, and most importantly, allows you to blink those fancy LEDs.
-
-         For more information and a userspace daemon for handling the extra
-         buttons see <http://acpi4asus.sf.net/>.
-
-         If you have an ACPI-compatible ASUS laptop, say Y or M here.
-
-config FUJITSU_LAPTOP
-        tristate "Fujitsu Laptop Extras"
-        depends on X86
-        depends on ACPI
-       depends on INPUT
-        depends on BACKLIGHT_CLASS_DEVICE
-        ---help---
-         This is a driver for laptops built by Fujitsu:
-
-           * P2xxx/P5xxx/S6xxx/S7xxx series Lifebooks
-           * Possibly other Fujitsu laptop models
-           * Tested with S6410 and S7020
-
-         It adds support for LCD brightness control and some hotkeys.
-
-         If you have a Fujitsu laptop, say Y or M here.
-
-config FUJITSU_LAPTOP_DEBUG
-       bool "Verbose debug mode for Fujitsu Laptop Extras"
-       depends on FUJITSU_LAPTOP
-       default n
-       ---help---
-         Enables extra debug output from the fujitsu extras driver, at the
-         expense of a slight increase in driver size.
-
-         If you are not sure, say N here.
-
-config TC1100_WMI
-       tristate "HP Compaq TC1100 Tablet WMI Extras (EXPERIMENTAL)"
-       depends on X86 && !X86_64
-       depends on EXPERIMENTAL
-       depends on ACPI
-       select ACPI_WMI
-       ---help---
-         This is a driver for the WMI extensions (wireless and bluetooth power
-         control) of the HP Compaq TC1100 tablet.
-
-config HP_WMI
-       tristate "HP WMI extras"
-       depends on ACPI_WMI
-       depends on INPUT
-       depends on RFKILL
-       help
-         Say Y here if you want to support WMI-based hotkeys on HP laptops and
-        to read data from WMI such as docking or ambient light sensor state.
-
-         To compile this driver as a module, choose M here: the module will
-         be called hp-wmi.
-

 config ICS932S401
        tristate "Integrated Circuits ICS932S401"
        depends on I2C && EXPERIMENTAL
 config ICS932S401
        tristate "Integrated Circuits ICS932S401"
        depends on I2C && EXPERIMENTAL


@@ -237,175 +178,11 @@ config ICS932S401
          This driver can also be built as a module. If so, the module
          will be called ics932s401.
 
          This driver can also be built as a module. If so, the module
          will be called ics932s401.
 

-config MSI_LAPTOP
-        tristate "MSI Laptop Extras"
-        depends on X86
-        depends on ACPI
-        depends on BACKLIGHT_CLASS_DEVICE
-        ---help---
-         This is a driver for laptops built by MSI (MICRO-STAR
-         INTERNATIONAL):
-
-         MSI MegaBook S270 (MS-1013)
-         Cytron/TCM/Medion/Tchibo MD96100/SAM2000
-
-         It adds support for Bluetooth, WLAN and LCD brightness control.
-
-         More information about this driver is available at
-         <http://0pointer.de/lennart/tchibo.html>.
-
-         If you have an MSI S270 laptop, say Y or M here.
-
-config PANASONIC_LAPTOP
-       tristate "Panasonic Laptop Extras"
-       depends on X86 && INPUT && ACPI
-        depends on BACKLIGHT_CLASS_DEVICE
-       ---help---
-         This driver adds support for access to backlight control and hotkeys
-         on Panasonic Let's Note laptops.
-
-         If you have a Panasonic Let's note laptop (such as the R1(N variant),
-         R2, R3, R5, T2, W2 and Y2 series), say Y.
-
-config COMPAL_LAPTOP
-       tristate "Compal Laptop Extras"
-       depends on X86
-       depends on ACPI
-       depends on BACKLIGHT_CLASS_DEVICE
-       ---help---
-         This is a driver for laptops built by Compal:
-
-         Compal FL90/IFL90
-         Compal FL91/IFL91
-         Compal FL92/JFL92
-         Compal FT00/IFT00
-
-         It adds support for Bluetooth, WLAN and LCD brightness control.
-
-         If you have an Compal FL9x/IFL9x/FT00 laptop, say Y or M here.
-
-config SONY_LAPTOP
-       tristate "Sony Laptop Extras"
-       depends on X86 && ACPI
-       select BACKLIGHT_CLASS_DEVICE
-       depends on INPUT
-         ---help---
-         This mini-driver drives the SNC and SPIC devices present in the ACPI
-         BIOS of the Sony Vaio laptops.
-
-         It gives access to some extra laptop functionalities like Bluetooth,
-         screen brightness control, Fn keys and allows powering on/off some
-         devices.
-
-         Read <file:Documentation/laptops/sony-laptop.txt> for more information.
-
-config SONYPI_COMPAT
-       bool "Sonypi compatibility"
-       depends on SONY_LAPTOP
-         ---help---
-         Build the sonypi driver compatibility code into the sony-laptop driver.
-
-config THINKPAD_ACPI
-       tristate "ThinkPad ACPI Laptop Extras"
-       depends on X86 && ACPI
-       select BACKLIGHT_LCD_SUPPORT
-       select BACKLIGHT_CLASS_DEVICE
-       select HWMON
-       select NVRAM
-       select INPUT
-       select NEW_LEDS
-       select LEDS_CLASS
-       select NET
-       select RFKILL
-       ---help---
-         This is a driver for the IBM and Lenovo ThinkPad laptops. It adds
-         support for Fn-Fx key combinations, Bluetooth control, video
-         output switching, ThinkLight control, UltraBay eject and more.
-         For more information about this driver see
-         <file:Documentation/laptops/thinkpad-acpi.txt> and
-         <http://ibm-acpi.sf.net/> .
-
-         This driver was formerly known as ibm-acpi.
-
-         If you have an IBM or Lenovo ThinkPad laptop, say Y or M here.
-
-config THINKPAD_ACPI_DEBUG
-       bool "Verbose debug mode"
-       depends on THINKPAD_ACPI
-       default n
-       ---help---
-         Enables extra debugging information, at the expense of a slightly
-         increase in driver size.
-
-         If you are not sure, say N here.
-
-config THINKPAD_ACPI_DOCK
-       bool "Legacy Docking Station Support"
-       depends on THINKPAD_ACPI
-       depends on ACPI_DOCK=n
-       default n
-       ---help---
-         Allows the thinkpad_acpi driver to handle docking station events.
-         This support was made obsolete by the generic ACPI docking station
-         support (CONFIG_ACPI_DOCK).  It will allow locking and removing the
-         laptop from the docking station, but will not properly connect PCI
-         devices.
-
-         If you are not sure, say N here.
-
-config THINKPAD_ACPI_BAY
-       bool "Legacy Removable Bay Support"
-       depends on THINKPAD_ACPI
-       default y
-       ---help---
-         Allows the thinkpad_acpi driver to handle removable bays.  It will
-         electrically disable the device in the bay, and also generate
-         notifications when the bay lever is ejected or inserted.
-
-         If you are not sure, say Y here.
-
-config THINKPAD_ACPI_VIDEO
-       bool "Video output control support"
-       depends on THINKPAD_ACPI
-       default y
-       ---help---
-         Allows the thinkpad_acpi driver to provide an interface to control
-         the various video output ports.
-
-         This feature often won't work well, depending on ThinkPad model,
-         display state, video output devices in use, whether there is a X
-         server running, phase of the moon, and the current mood of
-         Schroedinger's cat.  If you can use X.org's RandR to control
-         your ThinkPad's video output ports instead of this feature,
-         don't think twice: do it and say N here to save some memory.
-
-         If you are not sure, say Y here.
-
-config THINKPAD_ACPI_HOTKEY_POLL
-       bool "Support NVRAM polling for hot keys"
-       depends on THINKPAD_ACPI
-       default y
-       ---help---
-         Some thinkpad models benefit from NVRAM polling to detect a few of
-         the hot key press events.  If you know your ThinkPad model does not
-         need to do NVRAM polling to support any of the hot keys you use,
-         unselecting this option will save about 1kB of memory.
-
-         ThinkPads T40 and newer, R52 and newer, and X31 and newer are
-         unlikely to need NVRAM polling in their latest BIOS versions.
-
-         NVRAM polling can detect at most the following keys: ThinkPad/Access
-         IBM, Zoom, Switch Display (fn+F7), ThinkLight, Volume up/down/mute,
-         Brightness up/down, Display Expand (fn+F8), Hibernate (fn+F12).
-
-         If you are not sure, say Y here.  The driver enables polling only if
-         it is strictly necessary to do so.
-

 config ATMEL_SSC
        tristate "Device driver for Atmel SSC peripheral"
        depends on AVR32 || ARCH_AT91
        ---help---
 config ATMEL_SSC
        tristate "Device driver for Atmel SSC peripheral"
        depends on AVR32 || ARCH_AT91
        ---help---

-         This option enables device driver support for Atmel Syncronized
+         This option enables device driver support for Atmel Synchronized

          Serial Communication peripheral (SSC).
 
          The SSC peripheral supports a wide variety of serial frame based
          Serial Communication peripheral (SSC).
 
          The SSC peripheral supports a wide variety of serial frame based


@@ -413,31 +190,6 @@ config ATMEL_SSC
 
          If unsure, say N.
 
 
          If unsure, say N.
 

-config INTEL_MENLOW
-       tristate "Thermal Management driver for Intel menlow platform"
-       depends on ACPI_THERMAL
-       select THERMAL
-       depends on X86
-       ---help---
-         ACPI thermal management enhancement driver on
-         Intel Menlow platform.
-
-         If unsure, say N.
-
-config EEEPC_LAPTOP
-       tristate "Eee PC Hotkey Driver (EXPERIMENTAL)"
-       depends on X86
-       depends on ACPI
-       depends on BACKLIGHT_CLASS_DEVICE
-       depends on HWMON
-       depends on EXPERIMENTAL
-       depends on RFKILL
-       ---help---
-         This driver supports the Fn-Fx keys on Eee PC laptops.
-         It also adds the ability to switch camera/wlan on/off.
-
-         If you have an Eee PC laptop, say Y or M here.
-

 config ENCLOSURE_SERVICES
        tristate "Enclosure Services"
        default n
 config ENCLOSURE_SERVICES
        tristate "Enclosure Services"
        default n


@@ -450,10 +202,10 @@ config ENCLOSURE_SERVICES
 config SGI_XP
        tristate "Support communication between SGI SSIs"
        depends on NET
 config SGI_XP
        tristate "Support communication between SGI SSIs"
        depends on NET

-       depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_64) && SMP
+       depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_UV) && SMP

        select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
        select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
        select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
        select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2

-       select SGI_GRU if (IA64_GENERIC || IA64_SGI_UV || X86_64) && SMP
+       select SGI_GRU if X86_64 && SMP

        ---help---
          An SGI machine can be divided into multiple Single System
          Images which act independently of each other and have
        ---help---
          An SGI machine can be divided into multiple Single System
          Images which act independently of each other and have


@@ -461,6 +213,40 @@ config SGI_XP
          this feature will allow for direct communication between SSIs
          based on a network adapter and DMA messaging.
 
          this feature will allow for direct communication between SSIs
          based on a network adapter and DMA messaging.
 

+config CS5535_MFGPT
+       tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support"
+       depends on PCI
+       depends on X86
+       default n
+       help
+         This driver provides access to MFGPT functionality for other
+         drivers that need timers.  MFGPTs are available in the CS5535 and
+         CS5536 companion chips that are found in AMD Geode and several
+         other platforms.  They have a better resolution and max interval
+         than the generic PIT, and are suitable for use as high-res timers.
+         You probably don't want to enable this manually; other drivers that
+         make use of it should enable it.
+
+config CS5535_MFGPT_DEFAULT_IRQ
+       int
+       depends on CS5535_MFGPT
+       default 7
+       help
+         MFGPTs on the CS5535 require an interrupt.  The selected IRQ
+         can be overridden as a module option as well as by driver that
+         use the cs5535_mfgpt_ API; however, different architectures might
+         want to use a different IRQ by default.  This is here for
+         architectures to set as necessary.
+
+config CS5535_CLOCK_EVENT_SRC
+       tristate "CS5535/CS5536 high-res timer (MFGPT) events"
+       depends on GENERIC_TIME && GENERIC_CLOCKEVENTS && CS5535_MFGPT
+       help
+         This driver provides a clock event source based on the MFGPT
+         timer(s) in the CS5535 and CS5536 companion chips.
+         MFGPTs have a better resolution and max interval than the
+         generic PIT, and are suitable for use as high-res timers.
+

 config HP_ILO
        tristate "Channel interface driver for HP iLO/iLO2 processor"
        depends on PCI
 config HP_ILO
        tristate "Channel interface driver for HP iLO/iLO2 processor"
        depends on PCI


@@ -477,7 +263,7 @@ config HP_ILO
 
 config SGI_GRU
        tristate "SGI GRU driver"
 
 config SGI_GRU
        tristate "SGI GRU driver"

-       depends on (X86_64 || IA64_SGI_UV || IA64_GENERIC) && SMP
+       depends on X86_UV && SMP

        default n
        select MMU_NOTIFIER
        ---help---
        default n
        select MMU_NOTIFIER
        ---help---


@@ -498,18 +284,78 @@ config SGI_GRU_DEBUG
        This option enables addition debugging code for the SGI GRU driver. If
        you are unsure, say N.
 
        This option enables addition debugging code for the SGI GRU driver. If
        you are unsure, say N.
 

-config DELL_LAPTOP
-       tristate "Dell Laptop Extras (EXPERIMENTAL)"
+config ISL29003
+       tristate "Intersil ISL29003 ambient light sensor"
+       depends on I2C && SYSFS
+       help
+         If you say yes here you get support for the Intersil ISL29003
+         ambient light sensor.
+
+         This driver can also be built as a module.  If so, the module
+         will be called isl29003.
+
+config SENSORS_TSL2550
+       tristate "Taos TSL2550 ambient light sensor"
+       depends on I2C && SYSFS
+       help
+         If you say yes here you get support for the Taos TSL2550
+         ambient light sensor.
+
+         This driver can also be built as a module.  If so, the module
+         will be called tsl2550.
+
+config EP93XX_PWM
+       tristate "EP93xx PWM support"
+       depends on ARCH_EP93XX
+       help
+         This option enables device driver support for the PWM channels
+         on the Cirrus EP93xx processors.  The EP9307 chip only has one
+         PWM channel all the others have two, the second channel is an
+         alternate function of the EGPIO14 pin.  A sysfs interface is
+         provided to control the PWM channels.
+
+         To compile this driver as a module, choose M here: the module will
+         be called ep93xx_pwm.
+
+config DS1682
+       tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm"
+       depends on I2C && EXPERIMENTAL
+       help
+         If you say yes here you get support for Dallas Semiconductor
+         DS1682 Total Elapsed Time Recorder.
+
+         This driver can also be built as a module.  If so, the module
+         will be called ds1682.
+
+config TI_DAC7512
+       tristate "Texas Instruments DAC7512"
+       depends on SPI && SYSFS
+       help
+         If you say yes here you get support for the Texas Instruments
+         DAC7512 16-bit digital-to-analog converter.
+
+         This driver can also be built as a module. If so, the module
+         will be calles ti_dac7512.
+
+config VMWARE_BALLOON
+       tristate "VMware Balloon Driver"

        depends on X86
        depends on X86

-       depends on DCDBAS
-       depends on EXPERIMENTAL
-       depends on BACKLIGHT_CLASS_DEVICE
-       depends on RFKILL
-       default n
-       ---help---
-       This driver adds support for rfkill and backlight control to Dell
-       laptops.
+       help
+         This is VMware physical memory management driver which acts
+         like a "balloon" that can be inflated to reclaim physical pages
+         by reserving them in the guest and invalidating them in the
+         monitor, freeing up the underlying machine pages so they can
+         be allocated to other guests. The balloon can also be deflated
+         to allow the guest to use more physical memory.
+
+         If unsure, say N.
+
+         To compile this driver as a module, choose M here: the
+         module will be called vmware_balloon.

 
 source "drivers/misc/c2port/Kconfig"
 
 source "drivers/misc/c2port/Kconfig"

+source "drivers/misc/eeprom/Kconfig"
+source "drivers/misc/cb710/Kconfig"
+source "drivers/misc/iwmc3200top/Kconfig"

 
 endif # MISC_DEVICES
 
 endif # MISC_DEVICES