netfilter: xtables: optimize call flow around xt_ematch_foreach

[safe/jmp/linux-2.6] / drivers / mfd / Kconfig

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 08f2d07..8782978 100644 (file)
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -35,6 +35,14 @@ config MFD_ASIC3
          This driver supports the ASIC3 multifunction chip found on many
          PDAs (mainly iPAQ and HTC based ones)
 
          This driver supports the ASIC3 multifunction chip found on many
          PDAs (mainly iPAQ and HTC based ones)
 

+config MFD_SH_MOBILE_SDHI
+       bool "Support for SuperH Mobile SDHI"
+       depends on SUPERH
+       select MFD_CORE
+        ---help---
+         This driver supports the SDHI hardware block found in many
+         SuperH Mobile SoCs.
+

 config MFD_DM355EVM_MSP
        bool "DaVinci DM355 EVM microcontroller"
        depends on I2C && MACH_DAVINCI_DM355_EVM
 config MFD_DM355EVM_MSP
        bool "DaVinci DM355 EVM microcontroller"
        depends on I2C && MACH_DAVINCI_DM355_EVM


@@ -95,10 +103,10 @@ config MENELAUS
          cell phones and PDAs.
 
 config TWL4030_CORE
          cell phones and PDAs.
 
 config TWL4030_CORE

-       bool "Texas Instruments TWL4030/TPS659x0 Support"
+       bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"

        depends on I2C=y && GENERIC_HARDIRQS
        help
        depends on I2C=y && GENERIC_HARDIRQS
        help

-         Say yes here if you have TWL4030 family chip on your board.
+         Say yes here if you have TWL4030 / TWL6030 family chip on your board.

          This core driver provides register access and IRQ handling
          facilities, and registers devices for the various functions
          so that function-specific drivers can bind to them.
          This core driver provides register access and IRQ handling
          facilities, and registers devices for the various functions
          so that function-specific drivers can bind to them.


@@ -166,6 +174,16 @@ config PMIC_DA903X
          individual components like LCD backlight, voltage regulators,
          LEDs and battery-charger under the corresponding menus.
 
          individual components like LCD backlight, voltage regulators,
          LEDs and battery-charger under the corresponding menus.
 

+config PMIC_ADP5520
+       bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
+       depends on I2C=y
+       help
+         Say yes here to add support for Analog Devices AD5520 and ADP5501,
+         Multifunction Power Management IC. This includes
+         the I2C driver and the core APIs _only_, you have to select
+         individual components like LCD backlight, LEDs, GPIOs and Kepad
+         under the corresponding menus.
+

 config MFD_WM8400
        tristate "Support Wolfson Microelectronics WM8400"
        select MFD_CORE
 config MFD_WM8400
        tristate "Support Wolfson Microelectronics WM8400"
        select MFD_CORE


@@ -177,12 +195,12 @@ config MFD_WM8400
          the functionality of the device.
 
 config MFD_WM831X
          the functionality of the device.
 
 config MFD_WM831X

-       tristate "Support Wolfson Microelectronics WM831x PMICs"
+       bool "Support Wolfson Microelectronics WM831x/2x PMICs"

        select MFD_CORE
        select MFD_CORE

-       depends on I2C
+       depends on I2C=y

        help
        help

-         Support for the Wolfson Microelecronics WM831x PMICs.  This
-         driver provides common support for accessing the device,
+         Support for the Wolfson Microelecronics WM831x and WM832x PMICs.
+         This driver provides common support for accessing the device,

          additional drivers must be enabled in order to use the
          functionality of the device.
 
          additional drivers must be enabled in order to use the
          functionality of the device.
 


@@ -311,6 +329,25 @@ config EZX_PCAP
          This enables the PCAP ASIC present on EZX Phones. This is
          needed for MMC, TouchScreen, Sound, USB, etc..
 
          This enables the PCAP ASIC present on EZX Phones. This is
          needed for MMC, TouchScreen, Sound, USB, etc..
 

+config MFD_88PM8607
+       bool "Support Marvell 88PM8607"
+       depends on I2C=y
+       select MFD_CORE
+       help
+         This supports for Marvell 88PM8607 Power Management IC. This includes
+         the I2C driver and the core APIs _only_, you have to select
+         individual components like voltage regulators, RTC and
+         battery-charger under the corresponding menus.
+
+config AB4500_CORE
+       tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip"
+       depends on SPI
+       help
+         Select this option to enable access to AB4500 power management
+         chip. This connects to U8500 on the SSP/SPI bus and exports
+         read/write functions for the devices to get access to this chip.
+         This chip embeds various other multimedia funtionalities as well.
+

 endmenu
 
 menu "Multimedia Capabilities Port drivers"
 endmenu
 
 menu "Multimedia Capabilities Port drivers"