+ switch (dev->model) {
+ case EM2880_BOARD_TERRATEC_PRODIGY_XS:
+ case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
+ case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
+ case EM2860_BOARD_TERRATEC_HYBRID_XS:
+ case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
+ case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
+ case EM2882_BOARD_PINNACLE_HYBRID_PRO:
+ case EM2883_BOARD_KWORLD_HYBRID_A316:
+ case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
+ em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
+ em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+ msleep(50);
+
+ /* Sets GPO/GPIO sequences for this device */
+ dev->analog_gpio = hauppauge_wintv_hvr_900_analog;
+ dev->digital_gpio = hauppauge_wintv_hvr_900_digital;
+ dev->tun_analog_gpio = default_callback;
+ dev->tun_digital_gpio = default_callback;
+ break;
+
+ case EM2882_BOARD_TERRATEC_HYBRID_XS:
+ em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
+ em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+ msleep(50);
+
+ /* should be added ir_codes here */
+
+ /* Sets GPO/GPIO sequences for this device */
+ dev->analog_gpio = hauppauge_wintv_hvr_900_analog;
+ dev->digital_gpio = hauppauge_wintv_hvr_900_digital;
+ dev->tun_analog_gpio = default_callback;
+ dev->tun_digital_gpio = em2882_terratec_hybrid_xs_digital;
+ break;
+
+ case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
+ case EM2880_BOARD_TERRATEC_HYBRID_XS:
+ case EM2870_BOARD_TERRATEC_XS:
+ case EM2881_BOARD_PINNACLE_HYBRID_PRO:
+ case EM2880_BOARD_KWORLD_DVB_310U:
+ case EM2870_BOARD_KWORLD_350U:
+ case EM2881_BOARD_DNT_DA2_HYBRID:
+ em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
+ em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+ msleep(50);
+
+ /* NOTE: EM2881_DNT_DA2_HYBRID spend 140 msleep for digital
+ and analog commands. If this commands doesn't work,
+ add this timer. */
+
+ /* Sets GPO/GPIO sequences for this device */
+ dev->analog_gpio = default_analog;
+ dev->digital_gpio = default_digital;
+ dev->tun_analog_gpio = default_callback;
+ dev->tun_digital_gpio = default_callback;
+ break;
+
+ case EM2880_BOARD_MSI_DIGIVOX_AD:
+ case EM2880_BOARD_MSI_DIGIVOX_AD_II:
+ em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
+ em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+ msleep(50);
+
+ /* Sets GPO/GPIO sequences for this device */
+ dev->analog_gpio = em2880_msi_digivox_ad_analog;
+ dev->digital_gpio = em2880_msi_digivox_ad_digital;
+ dev->tun_analog_gpio = default_callback;
+ dev->tun_digital_gpio = default_callback;
+ break;
+
+ case EM2750_BOARD_UNKNOWN:
+ case EM2750_BOARD_DLCW_130:
+ em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x0a", 1);
+ break;
+
+ case EM2861_BOARD_PLEXTOR_PX_TV100U:
+ em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
+ em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+ /* FIXME guess */
+ /* Turn on analog audio output */
+ em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
+ break;
+
+ case EM2861_BOARD_KWORLD_PVRTV_300U:
+ case EM2880_BOARD_KWORLD_DVB_305U:
+ em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
+ em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x4c", 1);
+ msleep(10);
+ em28xx_write_regs(dev, 0x08, "\x6d", 1);
+ msleep(10);
+ em28xx_write_regs(dev, 0x08, "\x7d", 1);
+ msleep(10);
+ break;
+
+ case EM2870_BOARD_KWORLD_355U:
+ em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
+ em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+ msleep(50);
+
+ /* Sets GPO/GPIO sequences for this device */
+ dev->digital_gpio = em2870_kworld_355u_digital;
+ break;
+
+ case EM2870_BOARD_COMPRO_VIDEOMATE:
+ em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
+ em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+ /* TODO: someone can do some cleanup here...
+ not everything's needed */
+ em28xx_write_regs(dev, 0x04, "\x00", 1);
+ msleep(10);
+ em28xx_write_regs(dev, 0x04, "\x01", 1);
+ msleep(10);
+ em28xx_write_regs(dev, 0x08, "\xfd", 1);
+ mdelay(70);
+ em28xx_write_regs(dev, 0x08, "\xfc", 1);
+ mdelay(70);
+ em28xx_write_regs(dev, 0x08, "\xdc", 1);
+ mdelay(70);
+ em28xx_write_regs(dev, 0x08, "\xfc", 1);
+ mdelay(70);
+ break;
+
+ case EM2870_BOARD_TERRATEC_XS_MT2060:
+ em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
+ em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+ /* this device needs some gpio writes to get the DVB-T
+ demod work */
+ em28xx_write_regs(dev, 0x08, "\xfe", 1);
+ mdelay(70);
+ em28xx_write_regs(dev, 0x08, "\xde", 1);
+ mdelay(70);
+ dev->em28xx_write_regs(dev, 0x08, "\xfe", 1);
+ mdelay(70);
+ break;
+
+ case EM2870_BOARD_PINNACLE_PCTV_DVB:
+ em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+ /* this device needs some gpio writes to get the
+ DVB-T demod work */
+ em28xx_write_regs(dev, 0x08, "\xfe", 1);
+ mdelay(70);
+ em28xx_write_regs(dev, 0x08, "\xde", 1);
+ mdelay(70);
+ em28xx_write_regs(dev, 0x08, "\xfe", 1);
+ mdelay(70);
+ /* switch em2880 rc protocol */
+ em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x22", 1);
+ /* should be added ir_codes here */
+ break;
+
+ case EM2820_BOARD_GADMEI_UTV310:
+ em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
+ em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+ /* Turn on analog audio output */
+ em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
+ break;
+
+ case EM2860_BOARD_GADMEI_UTV330:
+ /* Turn on IR */
+ em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
+ em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+ /* should be added ir_codes here */
+ break;
+
+ case EM2820_BOARD_MSI_VOX_USB_2:
+ em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
+ em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
+ /* enables audio for that device */
+ em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
+ break;
+ }
+
+ em28xx_gpio_set(dev, dev->tun_analog_gpio);
+ em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
+
+ /* Unlock device */
+ em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED);
+}
+
+static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
+{
+ memset(ctl, 0, sizeof(*ctl));
+
+ ctl->fname = XC2028_DEFAULT_FIRMWARE;
+ ctl->max_len = 64;
+ ctl->mts = em28xx_boards[dev->model].mts_firmware;
+
+ switch (dev->model) {
+ case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
+ ctl->demod = XC3028_FE_ZARLINK456;
+ break;
+ case EM2880_BOARD_TERRATEC_HYBRID_XS:
+ ctl->demod = XC3028_FE_ZARLINK456;
+ break;
+ case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
+ /* djh - Not sure which demod we need here */
+ ctl->demod = XC3028_FE_DEFAULT;
+ break;
+ case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
+ case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
+ case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
+ /* FIXME: Better to specify the needed IF */
+ ctl->demod = XC3028_FE_DEFAULT;
+ break;
+ default:
+ ctl->demod = XC3028_FE_OREN538;
+ }
+}
+
+static void em28xx_config_tuner(struct em28xx *dev)
+{
+ struct v4l2_priv_tun_config xc2028_cfg;
+ struct tuner_setup tun_setup;
+ struct v4l2_frequency f;
+
+ if (dev->tuner_type == TUNER_ABSENT)
+ return;
+
+ tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
+ tun_setup.type = dev->tuner_type;
+ tun_setup.addr = dev->tuner_addr;
+ tun_setup.tuner_callback = em28xx_tuner_callback;
+
+ em28xx_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup);
+
+ if (dev->tuner_type == TUNER_XC2028) {
+ struct xc2028_ctrl ctl;
+
+ em28xx_setup_xc3028(dev, &ctl);
+
+ xc2028_cfg.tuner = TUNER_XC2028;
+ xc2028_cfg.priv = &ctl;
+
+ em28xx_i2c_call_clients(dev, TUNER_SET_CONFIG, &xc2028_cfg);
+ }
+
+ /* configure tuner */
+ f.tuner = 0;
+ f.type = V4L2_TUNER_ANALOG_TV;
+ f.frequency = 9076; /* just a magic number */
+ dev->ctl_freq = f.frequency;
+ em28xx_i2c_call_clients(dev, VIDIOC_S_FREQUENCY, &f);
+}
+
+static int em28xx_hint_board(struct em28xx *dev)
+{
+ int i;
+
+ /* HINT method: EEPROM
+ *
+ * This method works only for boards with eeprom.
+ * Uses a hash of all eeprom bytes. The hash should be
+ * unique for a vendor/tuner pair.
+ * There are a high chance that tuners for different
+ * video standards produce different hashes.
+ */
+ for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
+ if (dev->hash == em28xx_eeprom_hash[i].hash) {
+ dev->model = em28xx_eeprom_hash[i].model;
+ dev->tuner_type = em28xx_eeprom_hash[i].tuner;
+
+ em28xx_errdev("Your board has no unique USB ID.\n");
+ em28xx_errdev("A hint were successfully done, "
+ "based on eeprom hash.\n");
+ em28xx_errdev("This method is not 100%% failproof.\n");
+ em28xx_errdev("If the board were missdetected, "
+ "please email this log to:\n");
+ em28xx_errdev("\tV4L Mailing List "
+ " <video4linux-list@redhat.com>\n");
+ em28xx_errdev("Board detected as %s\n",
+ em28xx_boards[dev->model].name);
+
+ return 0;
+ }
+ }
+
+ /* HINT method: I2C attached devices
+ *
+ * This method works for all boards.
+ * Uses a hash of i2c scanned devices.
+ * Devices with the same i2c attached chips will
+ * be considered equal.
+ * This method is less precise than the eeprom one.
+ */
+
+ /* user did not request i2c scanning => do it now */
+ if (!dev->i2c_hash)
+ em28xx_do_i2c_scan(dev);
+
+ for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
+ if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
+ dev->model = em28xx_i2c_hash[i].model;
+ dev->tuner_type = em28xx_i2c_hash[i].tuner;
+ em28xx_errdev("Your board has no unique USB ID.\n");
+ em28xx_errdev("A hint were successfully done, "
+ "based on i2c devicelist hash.\n");
+ em28xx_errdev("This method is not 100%% failproof.\n");
+ em28xx_errdev("If the board were missdetected, "
+ "please email this log to:\n");
+ em28xx_errdev("\tV4L Mailing List "
+ " <video4linux-list@redhat.com>\n");
+ em28xx_errdev("Board detected as %s\n",
+ em28xx_boards[dev->model].name);
+
+ return 0;
+ }
+ }
+
+ em28xx_errdev("Your board has no unique USB ID and thus need a "
+ "hint to be detected.\n");
+ em28xx_errdev("You may try to use card=<n> insmod option to "
+ "workaround that.\n");
+ em28xx_errdev("Please send an email with this log to:\n");
+ em28xx_errdev("\tV4L Mailing List <video4linux-list@redhat.com>\n");
+ em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
+ em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
+
+ em28xx_errdev("Here is a list of valid choices for the card=<n>"
+ " insmod option:\n");
+ for (i = 0; i < em28xx_bcount; i++) {
+ em28xx_errdev(" card=%d -> %s\n",
+ i, em28xx_boards[i].name);
+ }
+ return -1;
+}
+
+/* ----------------------------------------------------------------------- */
+void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir)
+{
+ if (disable_ir) {
+ ir->get_key = NULL;
+ return ;
+ }
+
+ /* detect & configure */
+ switch (dev->model) {
+ case (EM2800_BOARD_UNKNOWN):
+ break;
+ case (EM2820_BOARD_UNKNOWN):
+ break;
+ case (EM2800_BOARD_TERRATEC_CINERGY_200):
+ case (EM2820_BOARD_TERRATEC_CINERGY_250):
+ ir->ir_codes = ir_codes_em_terratec;
+ ir->get_key = em28xx_get_key_terratec;
+ snprintf(ir->c.name, sizeof(ir->c.name),
+ "i2c IR (EM28XX Terratec)");
+ break;
+ case (EM2820_BOARD_PINNACLE_USB_2):
+ ir->ir_codes = ir_codes_pinnacle_grey;
+ ir->get_key = em28xx_get_key_pinnacle_usb_grey;
+ snprintf(ir->c.name, sizeof(ir->c.name),
+ "i2c IR (EM28XX Pinnacle PCTV)");
+ break;
+ case (EM2820_BOARD_HAUPPAUGE_WINTV_USB_2):
+ ir->ir_codes = ir_codes_hauppauge_new;
+ ir->get_key = em28xx_get_key_em_haup;
+ snprintf(ir->c.name, sizeof(ir->c.name),
+ "i2c IR (EM2840 Hauppauge)");
+ break;
+ case (EM2820_BOARD_MSI_VOX_USB_2):
+ break;
+ case (EM2800_BOARD_LEADTEK_WINFAST_USBII):
+ break;
+ case (EM2800_BOARD_KWORLD_USB2800):
+ break;
+ case (EM2800_BOARD_GRABBEEX_USB2800):
+ break;