-
-int set_pio_mode(ide_drive_t *drive, int arg)
-{
- struct request *rq;
- ide_hwif_t *hwif = drive->hwif;
- const struct ide_port_ops *port_ops = hwif->port_ops;
-
- if (arg < 0 || arg > 255)
- return -EINVAL;
-
- if (port_ops == NULL || port_ops->set_pio_mode == NULL ||
- (hwif->host_flags & IDE_HFLAG_NO_SET_MODE))
- return -ENOSYS;
-
- if (drive->special.b.set_tune)
- return -EBUSY;
-
- rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
- rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
-
- drive->tune_req = (u8) arg;
- drive->special.b.set_tune = 1;
-
- blk_execute_rq(drive->queue, NULL, rq, 0);
- blk_put_request(rq);
-
- return 0;
-}
-
-static int set_unmaskirq(ide_drive_t *drive, int arg)
-{
- if (drive->no_unmask)
- return -EPERM;
-
- if (arg < 0 || arg > 1)
- return -EINVAL;
-
- if (ide_spin_wait_hwgroup(drive))
- return -EBUSY;
- drive->unmask = arg;
- spin_unlock_irq(&ide_lock);
-
- return 0;
-}
-
-static int generic_ide_suspend(struct device *dev, pm_message_t mesg)
-{
- ide_drive_t *drive = dev->driver_data;
- ide_hwif_t *hwif = HWIF(drive);
- struct request *rq;
- struct request_pm_state rqpm;
- ide_task_t args;
- int ret;
-
- /* Call ACPI _GTM only once */
- if (!(drive->dn % 2))
- ide_acpi_get_timing(hwif);
-
- memset(&rqpm, 0, sizeof(rqpm));
- memset(&args, 0, sizeof(args));
- rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
- rq->cmd_type = REQ_TYPE_PM_SUSPEND;
- rq->special = &args;
- rq->data = &rqpm;
- rqpm.pm_step = ide_pm_state_start_suspend;
- if (mesg.event == PM_EVENT_PRETHAW)
- mesg.event = PM_EVENT_FREEZE;
- rqpm.pm_state = mesg.event;
-
- ret = blk_execute_rq(drive->queue, NULL, rq, 0);
- blk_put_request(rq);
- /* only call ACPI _PS3 after both drivers are suspended */
- if (!ret && (((drive->dn % 2) && hwif->drives[0].present
- && hwif->drives[1].present)
- || !hwif->drives[0].present
- || !hwif->drives[1].present))
- ide_acpi_set_state(hwif, 0);
- return ret;
-}
-
-static int generic_ide_resume(struct device *dev)
-{
- ide_drive_t *drive = dev->driver_data;
- ide_hwif_t *hwif = HWIF(drive);
- struct request *rq;
- struct request_pm_state rqpm;
- ide_task_t args;
- int err;
-
- /* Call ACPI _STM only once */
- if (!(drive->dn % 2)) {
- ide_acpi_set_state(hwif, 1);
- ide_acpi_push_timing(hwif);
- }
-
- ide_acpi_exec_tfs(drive);
-
- memset(&rqpm, 0, sizeof(rqpm));
- memset(&args, 0, sizeof(args));
- rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
- rq->cmd_type = REQ_TYPE_PM_RESUME;
- rq->cmd_flags |= REQ_PREEMPT;
- rq->special = &args;
- rq->data = &rqpm;
- rqpm.pm_step = ide_pm_state_start_resume;
- rqpm.pm_state = PM_EVENT_ON;
-
- err = blk_execute_rq(drive->queue, NULL, rq, 1);
- blk_put_request(rq);
-
- if (err == 0 && dev->driver) {
- ide_driver_t *drv = to_ide_driver(dev->driver);
-
- if (drv->resume)
- drv->resume(drive);
- }
-
- return err;
-}
-
-int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device *bdev,
- unsigned int cmd, unsigned long arg)
-{
- unsigned long flags;
- ide_driver_t *drv;
- void __user *p = (void __user *)arg;
- int err = 0, (*setfunc)(ide_drive_t *, int);
- u8 *val;
-
- switch (cmd) {
- case HDIO_GET_32BIT: val = &drive->io_32bit; goto read_val;
- case HDIO_GET_KEEPSETTINGS: val = &drive->keep_settings; goto read_val;
- case HDIO_GET_UNMASKINTR: val = &drive->unmask; goto read_val;
- case HDIO_GET_DMA: val = &drive->using_dma; goto read_val;
- case HDIO_SET_32BIT: setfunc = set_io_32bit; goto set_val;
- case HDIO_SET_KEEPSETTINGS: setfunc = set_ksettings; goto set_val;
- case HDIO_SET_PIO_MODE: setfunc = set_pio_mode; goto set_val;
- case HDIO_SET_UNMASKINTR: setfunc = set_unmaskirq; goto set_val;
- case HDIO_SET_DMA: setfunc = set_using_dma; goto set_val;
- }
-
- switch (cmd) {
- case HDIO_OBSOLETE_IDENTITY:
- case HDIO_GET_IDENTITY:
- if (bdev != bdev->bd_contains)
- return -EINVAL;
- if (drive->id_read == 0)
- return -ENOMSG;
- if (copy_to_user(p, drive->id, (cmd == HDIO_GET_IDENTITY) ? sizeof(*drive->id) : 142))
- return -EFAULT;
- return 0;
-
- case HDIO_GET_NICE:
- return put_user(drive->dsc_overlap << IDE_NICE_DSC_OVERLAP |
- drive->atapi_overlap << IDE_NICE_ATAPI_OVERLAP |
- drive->nice1 << IDE_NICE_1,
- (long __user *) arg);
-#ifdef CONFIG_IDE_TASK_IOCTL
- case HDIO_DRIVE_TASKFILE:
- if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
- return -EACCES;
- switch(drive->media) {
- case ide_disk:
- return ide_taskfile_ioctl(drive, cmd, arg);
- default:
- return -ENOMSG;
- }
-#endif /* CONFIG_IDE_TASK_IOCTL */
-
- case HDIO_DRIVE_CMD:
- if (!capable(CAP_SYS_RAWIO))
- return -EACCES;
- return ide_cmd_ioctl(drive, cmd, arg);
-
- case HDIO_DRIVE_TASK:
- if (!capable(CAP_SYS_RAWIO))
- return -EACCES;
- return ide_task_ioctl(drive, cmd, arg);
- case HDIO_SET_NICE:
- if (!capable(CAP_SYS_ADMIN)) return -EACCES;
- if (arg != (arg & ((1 << IDE_NICE_DSC_OVERLAP) | (1 << IDE_NICE_1))))
- return -EPERM;
- drive->dsc_overlap = (arg >> IDE_NICE_DSC_OVERLAP) & 1;
- drv = *(ide_driver_t **)bdev->bd_disk->private_data;
- if (drive->dsc_overlap && !drv->supports_dsc_overlap) {
- drive->dsc_overlap = 0;
- return -EPERM;
- }
- drive->nice1 = (arg >> IDE_NICE_1) & 1;
- return 0;
- case HDIO_DRIVE_RESET:
- if (!capable(CAP_SYS_ADMIN))
- return -EACCES;
-
- /*
- * Abort the current command on the
- * group if there is one, taking
- * care not to allow anything else
- * to be queued and to die on the
- * spot if we miss one somehow
- */
-
- spin_lock_irqsave(&ide_lock, flags);
-
- if (HWGROUP(drive)->resetting) {
- spin_unlock_irqrestore(&ide_lock, flags);
- return -EBUSY;
- }
-
- ide_abort(drive, "drive reset");
-
- BUG_ON(HWGROUP(drive)->handler);
-
- /* Ensure nothing gets queued after we
- drop the lock. Reset will clear the busy */
-
- HWGROUP(drive)->busy = 1;
- spin_unlock_irqrestore(&ide_lock, flags);
- (void) ide_do_reset(drive);
-
- return 0;
- case HDIO_GET_BUSSTATE:
- if (!capable(CAP_SYS_ADMIN))
- return -EACCES;
- if (put_user(HWIF(drive)->bus_state, (long __user *)arg))
- return -EFAULT;
- return 0;
-
- case HDIO_SET_BUSSTATE:
- if (!capable(CAP_SYS_ADMIN))
- return -EACCES;
- return -EOPNOTSUPP;
- default:
- return -EINVAL;
- }
-
-read_val:
- mutex_lock(&ide_setting_mtx);
- spin_lock_irqsave(&ide_lock, flags);
- err = *val;
- spin_unlock_irqrestore(&ide_lock, flags);
- mutex_unlock(&ide_setting_mtx);
- return err >= 0 ? put_user(err, (long __user *)arg) : err;
-
-set_val:
- if (bdev != bdev->bd_contains)
- err = -EINVAL;
- else {
- if (!capable(CAP_SYS_ADMIN))
- err = -EACCES;
- else {
- mutex_lock(&ide_setting_mtx);
- err = setfunc(drive, arg);
- mutex_unlock(&ide_setting_mtx);
- }
- }
- return err;
-}
-
-EXPORT_SYMBOL(generic_ide_ioctl);
-
-/*
- * ide_setup() gets called VERY EARLY during initialization,
- * to handle kernel "command line" strings beginning with "ide".
- *
- * Remember to update Documentation/ide/ide.txt if you change something here.
- */
-static int __init ide_setup(char *s)
-{
- printk(KERN_INFO "ide_setup: %s", s);
- init_ide_data ();
-
-#ifdef CONFIG_BLK_DEV_IDEDOUBLER
- if (!strcmp(s, "ide=doubler")) {
- extern int ide_doubler;
-
- printk(" : Enabled support for IDE doublers\n");
- ide_doubler = 1;
- goto obsolete_option;
- }
-#endif /* CONFIG_BLK_DEV_IDEDOUBLER */
-
- if (!strcmp(s, "ide=nodma")) {
- printk(" : Prevented DMA\n");
- noautodma = 1;
- goto obsolete_option;
- }
-
-#ifdef CONFIG_BLK_DEV_IDEACPI
- if (!strcmp(s, "ide=noacpi")) {
- //printk(" : Disable IDE ACPI support.\n");
- ide_noacpi = 1;
- goto obsolete_option;
- }
- if (!strcmp(s, "ide=acpigtf")) {
- //printk(" : Enable IDE ACPI _GTF support.\n");
- ide_acpigtf = 1;
- goto obsolete_option;
- }
- if (!strcmp(s, "ide=acpionboot")) {
- //printk(" : Call IDE ACPI methods on boot.\n");
- ide_acpionboot = 1;
- goto obsolete_option;
- }
-#endif /* CONFIG_BLK_DEV_IDEACPI */
-
- printk(" -- BAD OPTION\n");
- return 1;
-obsolete_option:
- printk(" -- OBSOLETE OPTION, WILL BE REMOVED SOON!\n");
- return 1;
-}
-
-EXPORT_SYMBOL(ide_lock);