- /* Clear the interrupt */
- stat = ide_read_status(drive);
-
- if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
- if (hwif->dma_ops->dma_end(drive) || (stat & ERR_STAT)) {
- /*
- * A DMA error is sometimes expected. For example,
- * if the tape is crossing a filemark during a
- * READ command, it will issue an irq and position
- * itself before the filemark, so that only a partial
- * data transfer will occur (which causes the DMA
- * error). In that case, we will later ask the tape
- * how much bytes of the original request were
- * actually transferred (we can't receive that
- * information from the DMA engine on most chipsets).
- */
-
- /*
- * On the contrary, a DMA error is never expected;
- * it usually indicates a hardware error or abort.
- * If the tape crosses a filemark during a READ
- * command, it will issue an irq and position itself
- * after the filemark (not before). Only a partial
- * data transfer will occur, but no DMA error.
- * (AS, 19 Apr 2001)
- */
- pc->flags |= PC_FLAG_DMA_ERROR;
- } else {
- pc->xferred = pc->req_xfer;
- idetape_update_buffers(pc);
- }
- debug_log(DBG_PROCS, "DMA finished\n");
-
- }
-
- /* No more interrupts */
- if ((stat & DRQ_STAT) == 0) {
- debug_log(DBG_SENSE, "Packet command completed, %d bytes"
- " transferred\n", pc->xferred);
-
- pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
- local_irq_enable();
-
-#if SIMULATE_ERRORS
- if ((pc->c[0] == WRITE_6 || pc->c[0] == READ_6) &&
- (++error_sim_count % 100) == 0) {
- printk(KERN_INFO "ide-tape: %s: simulating error\n",
- tape->name);
- stat |= ERR_STAT;
- }
-#endif
- if ((stat & ERR_STAT) && pc->c[0] == REQUEST_SENSE)
- stat &= ~ERR_STAT;
- if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) {
- /* Error detected */
- debug_log(DBG_ERR, "%s: I/O error\n", tape->name);
-
- if (pc->c[0] == REQUEST_SENSE) {
- printk(KERN_ERR "ide-tape: I/O error in request"
- " sense command\n");
- return ide_do_reset(drive);
- }
- debug_log(DBG_ERR, "[cmd %x]: check condition\n",
- pc->c[0]);
-
- /* Retry operation */
- return idetape_retry_pc(drive);
- }
- pc->error = 0;
- if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) &&
- (stat & SEEK_STAT) == 0) {
- /* Media access command */
- tape->dsc_polling_start = jiffies;
- tape->dsc_poll_freq = IDETAPE_DSC_MA_FAST;
- tape->dsc_timeout = jiffies + IDETAPE_DSC_MA_TIMEOUT;
- /* Allow ide.c to handle other requests */
- idetape_postpone_request(drive);
- return ide_stopped;
- }
- if (tape->failed_pc == pc)
- tape->failed_pc = NULL;
- /* Command finished - Call the callback function */
- return pc->idetape_callback(drive);
- }
-
- if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
- pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
- printk(KERN_ERR "ide-tape: The tape wants to issue more "
- "interrupts in DMA mode\n");
- printk(KERN_ERR "ide-tape: DMA disabled, reverting to PIO\n");
- ide_dma_off(drive);
- return ide_do_reset(drive);
- }
- /* Get the number of bytes to transfer on this interrupt. */
- bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) |
- hwif->INB(hwif->io_ports.lbam_addr);
-
- ireason = hwif->INB(hwif->io_ports.nsect_addr);
-
- if (ireason & CD) {
- printk(KERN_ERR "ide-tape: CoD != 0 in %s\n", __func__);
- return ide_do_reset(drive);
- }
- if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) {
- /* Hopefully, we will never get here */
- printk(KERN_ERR "ide-tape: We wanted to %s, ",
- (ireason & IO) ? "Write" : "Read");
- printk(KERN_ERR "ide-tape: but the tape wants us to %s !\n",
- (ireason & IO) ? "Read" : "Write");
- return ide_do_reset(drive);
- }
- if (!(pc->flags & PC_FLAG_WRITING)) {
- /* Reading - Check that we have enough space */
- temp = pc->xferred + bcount;
- if (temp > pc->req_xfer) {
- if (temp > pc->buf_size) {
- printk(KERN_ERR "ide-tape: The tape wants to "
- "send us more data than expected "
- "- discarding data\n");
- ide_pad_transfer(drive, 0, bcount);
- ide_set_handler(drive, &idetape_pc_intr,
- IDETAPE_WAIT_CMD, NULL);
- return ide_started;
- }
- debug_log(DBG_SENSE, "The tape wants to send us more "
- "data than expected - allowing transfer\n");
- }
- iobuf = &idetape_input_buffers;
- xferfunc = hwif->input_data;
- } else {
- iobuf = &idetape_output_buffers;
- xferfunc = hwif->output_data;
- }
-
- if (pc->bh)
- iobuf(drive, pc, bcount);
- else
- xferfunc(drive, NULL, pc->cur_pos, bcount);
-
- /* Update the current position */
- pc->xferred += bcount;
- pc->cur_pos += bcount;
-
- debug_log(DBG_SENSE, "[cmd %x] transferred %d bytes on that intr.\n",
- pc->c[0], bcount);
-
- /* And set the interrupt handler again */
- ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL);
- return ide_started;