- if (hwif->cds->extra) {
- hwif->extra_base = base + (hwif->channel ? 8 : 16);
-
- if (!hwif->mate || !hwif->mate->extra_ports) {
- if (!request_region(hwif->extra_base,
- hwif->cds->extra, hwif->cds->name)) {
- printk(" -- Error, extra ports in use.\n");
- release_region(base, ports);
- return 1;
- }
- hwif->extra_ports = hwif->cds->extra;
- }
- }
-
- if(hwif->mate)
- hwif->dma_master = (hwif->channel) ? hwif->mate->dma_base:base;
- else
- hwif->dma_master = base;
- return 0;
-}
-
-static int ide_dma_iobase(ide_hwif_t *hwif, unsigned long base, unsigned int ports)
-{
- if (hwif->mmio)
- return ide_mapped_mmio_dma(hwif, base,ports);
-
- return ide_iomio_dma(hwif, base, ports);
-}
-
-/*
- * This can be called for a dynamically installed interface. Don't __init it
- */
-void ide_setup_dma (ide_hwif_t *hwif, unsigned long dma_base, unsigned int num_ports)
-{
- if (ide_dma_iobase(hwif, dma_base, num_ports))
- return;
-
- if (ide_allocate_dma_engine(hwif)) {
- ide_release_dma(hwif);
- return;
- }
-
- if (!(hwif->dma_command))
- hwif->dma_command = hwif->dma_base;
- if (!(hwif->dma_vendor1))
- hwif->dma_vendor1 = (hwif->dma_base + 1);
- if (!(hwif->dma_status))
- hwif->dma_status = (hwif->dma_base + 2);
- if (!(hwif->dma_vendor3))
- hwif->dma_vendor3 = (hwif->dma_base + 3);
- if (!(hwif->dma_prdtable))
- hwif->dma_prdtable = (hwif->dma_base + 4);
-
- if (!hwif->dma_off_quietly)
- hwif->dma_off_quietly = &ide_dma_off_quietly;
- if (!hwif->dma_host_off)
- hwif->dma_host_off = &ide_dma_host_off;
- if (!hwif->ide_dma_on)
- hwif->ide_dma_on = &__ide_dma_on;
- if (!hwif->dma_host_on)
- hwif->dma_host_on = &ide_dma_host_on;
- if (!hwif->ide_dma_check)
- hwif->ide_dma_check = &__ide_dma_check;
- if (!hwif->dma_setup)
- hwif->dma_setup = &ide_dma_setup;
- if (!hwif->dma_exec_cmd)
- hwif->dma_exec_cmd = &ide_dma_exec_cmd;
- if (!hwif->dma_start)
- hwif->dma_start = &ide_dma_start;
- if (!hwif->ide_dma_end)
- hwif->ide_dma_end = &__ide_dma_end;
- if (!hwif->ide_dma_test_irq)
- hwif->ide_dma_test_irq = &__ide_dma_test_irq;
- if (!hwif->ide_dma_timeout)
- hwif->ide_dma_timeout = &__ide_dma_timeout;
- if (!hwif->ide_dma_lostirq)
- hwif->ide_dma_lostirq = &__ide_dma_lostirq;
-
- if (hwif->chipset != ide_trm290) {
- u8 dma_stat = hwif->INB(hwif->dma_status);
- printk(", BIOS settings: %s:%s, %s:%s",
- hwif->drives[0].name, (dma_stat & 0x20) ? "DMA" : "pio",
- hwif->drives[1].name, (dma_stat & 0x40) ? "DMA" : "pio");
- }
- printk("\n");