V4L/DVB (9711): gspca: Let gspca handle the webcams 045e:00f5 & 00f7 instead of sn9c102.

[safe/jmp/linux-2.6] / drivers / hwmon / Kconfig

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index af43d56..c709e82 100644 (file)
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -57,6 +57,16 @@ config SENSORS_ABITUGURU3
          This driver can also be built as a module.  If so, the module
          will be called abituguru3.
 
          This driver can also be built as a module.  If so, the module
          will be called abituguru3.
 

+config SENSORS_AD7414
+       tristate "Analog Devices AD7414"
+       depends on I2C && EXPERIMENTAL
+       help
+         If you say yes here you get support for the Analog Devices
+         AD7414 temperature monitoring chip.
+
+         This driver can also be built as a module. If so, the module
+         will be called ad7414.
+

 config SENSORS_AD7418
        tristate "Analog Devices AD7416, AD7417 and AD7418"
        depends on I2C && EXPERIMENTAL
 config SENSORS_AD7418
        tristate "Analog Devices AD7416, AD7417 and AD7418"
        depends on I2C && EXPERIMENTAL


@@ -67,6 +77,22 @@ config SENSORS_AD7418
          This driver can also be built as a module. If so, the module
          will be called ad7418.
 
          This driver can also be built as a module. If so, the module
          will be called ad7418.
 

+config SENSORS_ADCXX
+       tristate "National Semiconductor ADCxxxSxxx"
+       depends on SPI_MASTER && EXPERIMENTAL
+       help
+         If you say yes here you get support for the National Semiconductor
+         ADC<bb><c>S<sss> chip family, where
+         * bb  is the resolution in number of bits (8, 10, 12)
+         * c   is the number of channels (1, 2, 4, 8)
+         * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
+           kSPS and 101 for 1 MSPS)
+
+         Examples : ADC081S101, ADC124S501, ...
+
+         This driver can also be built as a module.  If so, the module
+         will be called adcxx.
+

 config SENSORS_ADM1021
        tristate "Analog Devices ADM1021 and compatibles"
        depends on I2C
 config SENSORS_ADM1021
        tristate "Analog Devices ADM1021 and compatibles"
        depends on I2C


@@ -124,7 +150,7 @@ config SENSORS_ADM1031
 
 config SENSORS_ADM9240
        tristate "Analog Devices ADM9240 and compatibles"
 
 config SENSORS_ADM9240
        tristate "Analog Devices ADM9240 and compatibles"

-       depends on I2C && EXPERIMENTAL
+       depends on I2C

        select HWMON_VID
        help
          If you say yes here you get support for Analog Devices ADM9240,
        select HWMON_VID
        help
          If you say yes here you get support for Analog Devices ADM9240,


@@ -133,6 +159,16 @@ config SENSORS_ADM9240
          This driver can also be built as a module.  If so, the module
          will be called adm9240.
 
          This driver can also be built as a module.  If so, the module
          will be called adm9240.
 

+config SENSORS_ADT7462
+       tristate "Analog Devices ADT7462"
+       depends on I2C && EXPERIMENTAL
+       help
+         If you say yes here you get support for the Analog Devices
+         ADT7462 temperature monitoring chips.
+
+         This driver can also be built as a module. If so, the module
+         will be called adt7462.
+

 config SENSORS_ADT7470
        tristate "Analog Devices ADT7470"
        depends on I2C && EXPERIMENTAL
 config SENSORS_ADT7470
        tristate "Analog Devices ADT7470"
        depends on I2C && EXPERIMENTAL


@@ -143,6 +179,16 @@ config SENSORS_ADT7470
          This driver can also be built as a module. If so, the module
          will be called adt7470.
 
          This driver can also be built as a module. If so, the module
          will be called adt7470.
 

+config SENSORS_ADT7473
+       tristate "Analog Devices ADT7473"
+       depends on I2C && EXPERIMENTAL
+       help
+         If you say yes here you get support for the Analog Devices
+         ADT7473 temperature monitoring chips.
+
+         This driver can also be built as a module. If so, the module
+         will be called adt7473.
+

 config SENSORS_K8TEMP
        tristate "AMD Athlon64/FX or Opteron temperature sensor"
        depends on X86 && PCI && EXPERIMENTAL
 config SENSORS_K8TEMP
        tristate "AMD Athlon64/FX or Opteron temperature sensor"
        depends on X86 && PCI && EXPERIMENTAL


@@ -320,6 +366,20 @@ config SENSORS_CORETEMP
          sensor inside your CPU. Supported all are all known variants
          of Intel Core family.
 
          sensor inside your CPU. Supported all are all known variants
          of Intel Core family.
 

+config SENSORS_IBMAEM
+       tristate "IBM Active Energy Manager temperature/power sensors and control"
+       select IPMI_SI
+       depends on IPMI_HANDLER
+       help
+         If you say yes here you get support for the temperature and
+         power sensors and capping hardware in various IBM System X
+         servers that support Active Energy Manager.  This includes
+         the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
+         and certain HS2x/LS2x/QS2x blades.
+
+         This driver can also be built as a module.  If so, the module
+         will be called ibmaem.
+

 config SENSORS_IBMPEX
        tristate "IBM PowerExecutive temperature/power sensors"
        select IPMI_SI
 config SENSORS_IBMPEX
        tristate "IBM PowerExecutive temperature/power sensors"
        select IPMI_SI


@@ -327,8 +387,9 @@ config SENSORS_IBMPEX
        help
          If you say yes here you get support for the temperature and
          power sensors in various IBM System X servers that support
        help
          If you say yes here you get support for the temperature and
          power sensors in various IBM System X servers that support

-         PowerExecutive.  So far this includes the x3550, x3650, x3655,
-         x3755, and certain HS20 blades.
+         PowerExecutive.  So far this includes the x3350, x3550, x3650,
+         x3655, and x3755; the x3800, x3850, and x3950 models that have
+         PCI Express; and some of the HS2x, LS2x, and QS2x blades.

 
          This driver can also be built as a module.  If so, the module
          will be called ibmpex.
 
          This driver can also be built as a module.  If so, the module
          will be called ibmpex.


@@ -369,13 +430,24 @@ config SENSORS_LM75
        tristate "National Semiconductor LM75 and compatibles"
        depends on I2C
        help
        tristate "National Semiconductor LM75 and compatibles"
        depends on I2C
        help

-         If you say yes here you get support for National Semiconductor LM75
-         sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
-         9-bit precision mode), and TelCom (now Microchip) TCN75.
+         If you say yes here you get support for one common type of
+         temperature sensor chip, with models including:
+
+               - Dallas Semiconductor DS75 and DS1775
+               - Maxim MAX6625 and MAX6626
+               - Microchip MCP980x
+               - National Semiconductor LM75
+               - NXP's LM75A
+               - ST Microelectronics STDS75
+               - TelCom (now Microchip) TCN75
+               - Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275

 
 

-         The DS75 and DS1775 in 10- to 12-bit precision modes will require
-         a force module parameter. The driver will not handle the extra
-         precision anyhow.
+         This driver supports driver model based binding through board
+         specific I2C device tables.
+
+         It also supports the "legacy" style of driver binding.  To use
+         that with some chips which don't replicate LM75 quirks exactly,
+         you may need the "force" module parameter.

 
          This driver can also be built as a module.  If so, the module
          will be called lm75.
 
          This driver can also be built as a module.  If so, the module
          will be called lm75.


@@ -448,11 +520,9 @@ config SENSORS_LM90
        depends on I2C
        help
          If you say yes here you get support for National Semiconductor LM90,
        depends on I2C
        help
          If you say yes here you get support for National Semiconductor LM90,

-         LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657,
-         MAX6658, MAX6659, MAX6680 and MAX6681 sensor chips.
-
-         The Analog Devices ADT7461 sensor chip is also supported, but only
-         if found in ADM1032 compatibility mode.
+         LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, and Maxim
+         MAX6646, MAX6647, MAX6649, MAX6657, MAX6658, MAX6659, MAX6680 and
+         MAX6681 sensor chips.

 
          This driver can also be built as a module.  If so, the module
          will be called lm90.
 
          This driver can also be built as a module.  If so, the module
          will be called lm90.


@@ -478,6 +548,15 @@ config SENSORS_LM93
          This driver can also be built as a module.  If so, the module
          will be called lm93.
 
          This driver can also be built as a module.  If so, the module
          will be called lm93.
 

+config SENSORS_MAX1111
+       tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
+       depends on SPI_MASTER
+       help
+         Say y here to support Maxim's MAX1111 ADC chips.
+
+         This driver can also be built as a module.  If so, the module
+         will be called max1111.
+

 config SENSORS_MAX1619
        tristate "Maxim MAX1619 sensor chip"
        depends on I2C
 config SENSORS_MAX1619
        tristate "Maxim MAX1619 sensor chip"
        depends on I2C


@@ -539,8 +618,8 @@ config SENSORS_DME1737
        select HWMON_VID
        help
          If you say yes here you get support for the hardware monitoring
        select HWMON_VID
        help
          If you say yes here you get support for the hardware monitoring

-         and fan control features of the SMSC DME1737 (and compatibles
-         like the Asus A8000) and SCH311x Super-I/O chips.
+         and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
+         Asus A8000 Super-I/O chips.

 
          This driver can also be built as a module.  If so, the module
          will be called dme1737.
 
          This driver can also be built as a module.  If so, the module
          will be called dme1737.


@@ -588,6 +667,16 @@ config SENSORS_SMSC47B397
          This driver can also be built as a module.  If so, the module
          will be called smsc47b397.
 
          This driver can also be built as a module.  If so, the module
          will be called smsc47b397.
 

+config SENSORS_ADS7828
+       tristate "Texas Instruments ADS7828"
+       depends on I2C
+       help
+         If you say yes here you get support for Texas Instruments ADS7828
+         12-bit 8-channel ADC device.
+
+         This driver can also be built as a module.  If so, the module
+         will be called ads7828.
+

 config SENSORS_THMC50
        tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
        depends on I2C && EXPERIMENTAL
 config SENSORS_THMC50
        tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
        depends on I2C && EXPERIMENTAL


@@ -631,13 +720,13 @@ config SENSORS_VT8231
          will be called vt8231.
 
 config SENSORS_W83781D
          will be called vt8231.
 
 config SENSORS_W83781D

-       tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
+       tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"

        depends on I2C
        select HWMON_VID
        help
          If you say yes here you get support for the Winbond W8378x series
        depends on I2C
        select HWMON_VID
        help
          If you say yes here you get support for the Winbond W8378x series

-         of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
-         and the similar Asus AS99127F.
+         of sensor chips: the W83781D, W83782D and W83783S, and the similar
+         Asus AS99127F.

 
          This driver can also be built as a module.  If so, the module
          will be called w83781d.
 
          This driver can also be built as a module.  If so, the module
          will be called w83781d.


@@ -719,6 +808,13 @@ config SENSORS_W83627EHF
          This driver can also be built as a module.  If so, the module
          will be called w83627ehf.
 
          This driver can also be built as a module.  If so, the module
          will be called w83627ehf.
 

+config SENSORS_ULTRA45
+       tristate "Sun Ultra45 PIC16F747"
+       depends on SPARC64
+       help
+         This driver provides support for the Ultra45 workstation environmental
+         sensors.
+

 config SENSORS_HDAPS
        tristate "IBM Hard Drive Active Protection System (hdaps)"
        depends on INPUT && X86
 config SENSORS_HDAPS
        tristate "IBM Hard Drive Active Protection System (hdaps)"
        depends on INPUT && X86


@@ -739,6 +835,25 @@ config SENSORS_HDAPS
          Say Y here if you have an applicable laptop and want to experience
          the awesome power of hdaps.
 
          Say Y here if you have an applicable laptop and want to experience
          the awesome power of hdaps.
 

+config SENSORS_LIS3LV02D
+       tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer"
+       depends on ACPI && INPUT
+       default n
+       help
+         This driver provides support for the LIS3LV02Dx accelerometer. In
+         particular, it can be found in a number of HP laptops, which have the
+         "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such
+         systems the driver should load automatically (via ACPI). The
+         accelerometer might also be found in other systems, connected via SPI
+         or I2C.  The accelerometer data is readable via
+         /sys/devices/platform/lis3lv02d.
+
+         This driver also provides an absolute input class device, allowing
+         the laptop to act as a pinball machine-esque joystick.
+
+         This driver can also be built as a module.  If so, the module
+         will be called lis3lv02d.
+

 config SENSORS_APPLESMC
        tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
        depends on INPUT && X86
 config SENSORS_APPLESMC
        tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
        depends on INPUT && X86