LIS3LV02Dx: remove unused #include <version.h>

[safe/jmp/linux-2.6] / drivers / hwmon / Kconfig

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index e488d69..c709e82 100644 (file)
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -2,10 +2,9 @@
 # Hardware monitoring chip drivers configuration
 #
 
 # Hardware monitoring chip drivers configuration
 #
 

-menu "Hardware Monitoring support"
-
-config HWMON
+menuconfig HWMON

        tristate "Hardware Monitoring support"
        tristate "Hardware Monitoring support"

+       depends on HAS_IOMEM

        default y
        help
          Hardware monitoring devices let you monitor the hardware health
        default y
        help
          Hardware monitoring devices let you monitor the hardware health


@@ -23,25 +22,80 @@ config HWMON
          This support can also be built as a module.  If so, the module
          will be called hwmon.
 
          This support can also be built as a module.  If so, the module
          will be called hwmon.
 

+if HWMON
+

 config HWMON_VID
        tristate
        default n
 
 config SENSORS_ABITUGURU
 config HWMON_VID
        tristate
        default n
 
 config SENSORS_ABITUGURU

-       tristate "Abit uGuru"
-       depends on HWMON && EXPERIMENTAL
+       tristate "Abit uGuru (rev 1 & 2)"
+       depends on X86 && EXPERIMENTAL

        help
        help

-         If you say yes here you get support for the Abit uGuru chips
-         sensor part. The voltage and frequency control parts of the Abit
-         uGuru are not supported. The Abit uGuru chip can be found on Abit
-         uGuru featuring motherboards (most modern Abit motherboards).
+         If you say yes here you get support for the sensor part of the first
+         and second revision of the Abit uGuru chip. The voltage and frequency
+         control parts of the Abit uGuru are not supported. The Abit uGuru
+         chip can be found on Abit uGuru featuring motherboards (most modern
+         Abit motherboards from before end 2005). For more info and a list
+         of which motherboards have which revision see
+         Documentation/hwmon/abituguru

 
          This driver can also be built as a module.  If so, the module
          will be called abituguru.
 
 
          This driver can also be built as a module.  If so, the module
          will be called abituguru.
 

+config SENSORS_ABITUGURU3
+       tristate "Abit uGuru (rev 3)"
+       depends on X86 && EXPERIMENTAL
+       help
+         If you say yes here you get support for the sensor part of the
+         third revision of the Abit uGuru chip. Only reading the sensors
+         and their settings is supported. The third revision of the Abit
+         uGuru chip can be found on recent Abit motherboards (since end
+         2005). For more info and a list of which motherboards have which
+         revision see Documentation/hwmon/abituguru3
+
+         This driver can also be built as a module.  If so, the module
+         will be called abituguru3.
+
+config SENSORS_AD7414
+       tristate "Analog Devices AD7414"
+       depends on I2C && EXPERIMENTAL
+       help
+         If you say yes here you get support for the Analog Devices
+         AD7414 temperature monitoring chip.
+
+         This driver can also be built as a module. If so, the module
+         will be called ad7414.
+
+config SENSORS_AD7418
+       tristate "Analog Devices AD7416, AD7417 and AD7418"
+       depends on I2C && EXPERIMENTAL
+       help
+         If you say yes here you get support for the Analog Devices
+         AD7416, AD7417 and AD7418 temperature monitoring chips.
+
+         This driver can also be built as a module. If so, the module
+         will be called ad7418.
+
+config SENSORS_ADCXX
+       tristate "National Semiconductor ADCxxxSxxx"
+       depends on SPI_MASTER && EXPERIMENTAL
+       help
+         If you say yes here you get support for the National Semiconductor
+         ADC<bb><c>S<sss> chip family, where
+         * bb  is the resolution in number of bits (8, 10, 12)
+         * c   is the number of channels (1, 2, 4, 8)
+         * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
+           kSPS and 101 for 1 MSPS)
+
+         Examples : ADC081S101, ADC124S501, ...
+
+         This driver can also be built as a module.  If so, the module
+         will be called adcxx.
+

 config SENSORS_ADM1021
        tristate "Analog Devices ADM1021 and compatibles"
 config SENSORS_ADM1021
        tristate "Analog Devices ADM1021 and compatibles"

-       depends on HWMON && I2C
+       depends on I2C

        help
          If you say yes here you get support for Analog Devices ADM1021
          and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
        help
          If you say yes here you get support for Analog Devices ADM1021
          and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,


@@ -53,7 +107,7 @@ config SENSORS_ADM1021
 
 config SENSORS_ADM1025
        tristate "Analog Devices ADM1025 and compatibles"
 
 config SENSORS_ADM1025
        tristate "Analog Devices ADM1025 and compatibles"

-       depends on HWMON && I2C
+       depends on I2C

        select HWMON_VID
        help
          If you say yes here you get support for Analog Devices ADM1025
        select HWMON_VID
        help
          If you say yes here you get support for Analog Devices ADM1025


@@ -64,7 +118,7 @@ config SENSORS_ADM1025
 
 config SENSORS_ADM1026
        tristate "Analog Devices ADM1026 and compatibles"
 
 config SENSORS_ADM1026
        tristate "Analog Devices ADM1026 and compatibles"

-       depends on HWMON && I2C && EXPERIMENTAL
+       depends on I2C && EXPERIMENTAL

        select HWMON_VID
        help
          If you say yes here you get support for Analog Devices ADM1026
        select HWMON_VID
        help
          If you say yes here you get support for Analog Devices ADM1026


@@ -75,7 +129,7 @@ config SENSORS_ADM1026
 
 config SENSORS_ADM1029
        tristate "Analog Devices ADM1029"
 
 config SENSORS_ADM1029
        tristate "Analog Devices ADM1029"

-       depends on HWMON && I2C && EXPERIMENTAL
+       depends on I2C && EXPERIMENTAL

        help
          If you say yes here you get support for Analog Devices ADM1029
          sensor chip.
        help
          If you say yes here you get support for Analog Devices ADM1029
          sensor chip.


@@ -86,7 +140,7 @@ config SENSORS_ADM1029
 
 config SENSORS_ADM1031
        tristate "Analog Devices ADM1031 and compatibles"
 
 config SENSORS_ADM1031
        tristate "Analog Devices ADM1031 and compatibles"

-       depends on HWMON && I2C && EXPERIMENTAL
+       depends on I2C && EXPERIMENTAL

        help
          If you say yes here you get support for Analog Devices ADM1031
          and ADM1030 sensor chips.
        help
          If you say yes here you get support for Analog Devices ADM1031
          and ADM1030 sensor chips.


@@ -96,7 +150,7 @@ config SENSORS_ADM1031
 
 config SENSORS_ADM9240
        tristate "Analog Devices ADM9240 and compatibles"
 
 config SENSORS_ADM9240
        tristate "Analog Devices ADM9240 and compatibles"

-       depends on HWMON && I2C && EXPERIMENTAL
+       depends on I2C

        select HWMON_VID
        help
          If you say yes here you get support for Analog Devices ADM9240,
        select HWMON_VID
        help
          If you say yes here you get support for Analog Devices ADM9240,


@@ -105,9 +159,39 @@ config SENSORS_ADM9240
          This driver can also be built as a module.  If so, the module
          will be called adm9240.
 
          This driver can also be built as a module.  If so, the module
          will be called adm9240.
 

+config SENSORS_ADT7462
+       tristate "Analog Devices ADT7462"
+       depends on I2C && EXPERIMENTAL
+       help
+         If you say yes here you get support for the Analog Devices
+         ADT7462 temperature monitoring chips.
+
+         This driver can also be built as a module. If so, the module
+         will be called adt7462.
+
+config SENSORS_ADT7470
+       tristate "Analog Devices ADT7470"
+       depends on I2C && EXPERIMENTAL
+       help
+         If you say yes here you get support for the Analog Devices
+         ADT7470 temperature monitoring chips.
+
+         This driver can also be built as a module. If so, the module
+         will be called adt7470.
+
+config SENSORS_ADT7473
+       tristate "Analog Devices ADT7473"
+       depends on I2C && EXPERIMENTAL
+       help
+         If you say yes here you get support for the Analog Devices
+         ADT7473 temperature monitoring chips.
+
+         This driver can also be built as a module. If so, the module
+         will be called adt7473.
+

 config SENSORS_K8TEMP
        tristate "AMD Athlon64/FX or Opteron temperature sensor"
 config SENSORS_K8TEMP
        tristate "AMD Athlon64/FX or Opteron temperature sensor"

-       depends on HWMON && X86 && PCI && EXPERIMENTAL
+       depends on X86 && PCI && EXPERIMENTAL

        help
          If you say yes here you get support for the temperature
          sensor(s) inside your CPU. Supported is whole AMD K8
        help
          If you say yes here you get support for the temperature
          sensor(s) inside your CPU. Supported is whole AMD K8


@@ -119,7 +203,8 @@ config SENSORS_K8TEMP
 
 config SENSORS_AMS
        tristate "Apple Motion Sensor driver"
 
 config SENSORS_AMS
        tristate "Apple Motion Sensor driver"

-       depends on HWMON && PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
+       depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
+       select INPUT_POLLDEV

        help
          Support for the motion sensor included in PowerBooks. Includes
          implementations for PMU and I2C.
        help
          Support for the motion sensor included in PowerBooks. Includes
          implementations for PMU and I2C.


@@ -144,7 +229,7 @@ config SENSORS_AMS_I2C
 
 config SENSORS_ASB100
        tristate "Asus ASB100 Bach"
 
 config SENSORS_ASB100
        tristate "Asus ASB100 Bach"

-       depends on HWMON && I2C && EXPERIMENTAL
+       depends on X86 && I2C && EXPERIMENTAL

        select HWMON_VID
        help
          If you say yes here you get support for the ASB100 Bach sensor
        select HWMON_VID
        help
          If you say yes here you get support for the ASB100 Bach sensor


@@ -155,7 +240,7 @@ config SENSORS_ASB100
 
 config SENSORS_ATXP1
        tristate "Attansic ATXP1 VID controller"
 
 config SENSORS_ATXP1
        tristate "Attansic ATXP1 VID controller"

-       depends on HWMON && I2C && EXPERIMENTAL
+       depends on I2C && EXPERIMENTAL

        select HWMON_VID
        help
          If you say yes here you get support for the Attansic ATXP1 VID
        select HWMON_VID
        help
          If you say yes here you get support for the Attansic ATXP1 VID


@@ -169,7 +254,7 @@ config SENSORS_ATXP1
 
 config SENSORS_DS1621
        tristate "Dallas Semiconductor DS1621 and DS1625"
 
 config SENSORS_DS1621
        tristate "Dallas Semiconductor DS1621 and DS1625"

-       depends on HWMON && I2C
+       depends on I2C

        help
          If you say yes here you get support for Dallas Semiconductor
          DS1621 and DS1625 sensor chips.
        help
          If you say yes here you get support for Dallas Semiconductor
          DS1621 and DS1625 sensor chips.


@@ -177,20 +262,50 @@ config SENSORS_DS1621
          This driver can also be built as a module.  If so, the module
          will be called ds1621.
 
          This driver can also be built as a module.  If so, the module
          will be called ds1621.
 

+config SENSORS_I5K_AMB
+       tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
+       depends on PCI && EXPERIMENTAL
+       help
+         If you say yes here you get support for FB-DIMM AMB temperature
+         monitoring chips on systems with the Intel 5000 series chipset.
+
+         This driver can also be built as a module. If so, the module
+         will be called i5k_amb.
+

 config SENSORS_F71805F
 config SENSORS_F71805F

-       tristate "Fintek F71805F/FG and F71872F/FG"
-       depends on HWMON && EXPERIMENTAL
+       tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
+       depends on EXPERIMENTAL

        help
          If you say yes here you get support for hardware monitoring
        help
          If you say yes here you get support for hardware monitoring

-         features of the Fintek F71805F/FG and F71872F/FG Super-I/O
-         chips.
+         features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
+         Super-I/O chips.

 
          This driver can also be built as a module.  If so, the module
          will be called f71805f.
 
 
          This driver can also be built as a module.  If so, the module
          will be called f71805f.
 

+config SENSORS_F71882FG
+       tristate "Fintek F71882FG and F71883FG"
+       depends on EXPERIMENTAL
+       help
+         If you say yes here you get support for hardware monitoring
+         features of the Fintek F71882FG and F71883FG Super-I/O chips.
+
+         This driver can also be built as a module.  If so, the module
+         will be called f71882fg.
+
+config SENSORS_F75375S
+       tristate "Fintek F75375S/SP and F75373";
+       depends on I2C && EXPERIMENTAL
+       help
+         If you say yes here you get support for hardware monitoring
+         features of the Fintek F75375S/SP and F75373
+
+         This driver can also be built as a module.  If so, the module
+         will be called f75375s.
+

 config SENSORS_FSCHER
        tristate "FSC Hermes"
 config SENSORS_FSCHER
        tristate "FSC Hermes"

-       depends on HWMON && I2C
+       depends on X86 && I2C

        help
          If you say yes here you get support for Fujitsu Siemens
          Computers Hermes sensor chips.
        help
          If you say yes here you get support for Fujitsu Siemens
          Computers Hermes sensor chips.


@@ -200,7 +315,7 @@ config SENSORS_FSCHER
 
 config SENSORS_FSCPOS
        tristate "FSC Poseidon"
 
 config SENSORS_FSCPOS
        tristate "FSC Poseidon"

-       depends on HWMON && I2C
+       depends on X86 && I2C

        help
          If you say yes here you get support for Fujitsu Siemens
          Computers Poseidon sensor chips.
        help
          If you say yes here you get support for Fujitsu Siemens
          Computers Poseidon sensor chips.


@@ -208,9 +323,23 @@ config SENSORS_FSCPOS
          This driver can also be built as a module.  If so, the module
          will be called fscpos.
 
          This driver can also be built as a module.  If so, the module
          will be called fscpos.
 

+config SENSORS_FSCHMD
+       tristate "FSC Poseidon, Scylla, Hermes, Heimdall and Heracles"
+       depends on X86 && I2C && EXPERIMENTAL
+       help
+         If you say yes here you get support for various Fujitsu Siemens
+         Computers sensor chips.
+
+         This is a new merged driver for FSC sensor chips which is intended
+         as a replacment for the fscpos, fscscy and fscher drivers and adds
+         support for several other FCS sensor chips.
+
+         This driver can also be built as a module.  If so, the module
+         will be called fschmd.
+

 config SENSORS_GL518SM
        tristate "Genesys Logic GL518SM"
 config SENSORS_GL518SM
        tristate "Genesys Logic GL518SM"

-       depends on HWMON && I2C
+       depends on I2C

        help
          If you say yes here you get support for Genesys Logic GL518SM
          sensor chips.
        help
          If you say yes here you get support for Genesys Logic GL518SM
          sensor chips.


@@ -220,7 +349,7 @@ config SENSORS_GL518SM
 
 config SENSORS_GL520SM
        tristate "Genesys Logic GL520SM"
 
 config SENSORS_GL520SM
        tristate "Genesys Logic GL520SM"

-       depends on HWMON && I2C
+       depends on I2C

        select HWMON_VID
        help
          If you say yes here you get support for Genesys Logic GL520SM
        select HWMON_VID
        help
          If you say yes here you get support for Genesys Logic GL520SM


@@ -231,27 +360,53 @@ config SENSORS_GL520SM
 
 config SENSORS_CORETEMP
        tristate "Intel Core (2) Duo/Solo temperature sensor"
 
 config SENSORS_CORETEMP
        tristate "Intel Core (2) Duo/Solo temperature sensor"

-       depends on HWMON && X86 && EXPERIMENTAL
+       depends on X86 && EXPERIMENTAL

        help
          If you say yes here you get support for the temperature
          sensor inside your CPU. Supported all are all known variants
          of Intel Core family.
 
        help
          If you say yes here you get support for the temperature
          sensor inside your CPU. Supported all are all known variants
          of Intel Core family.
 

+config SENSORS_IBMAEM
+       tristate "IBM Active Energy Manager temperature/power sensors and control"
+       select IPMI_SI
+       depends on IPMI_HANDLER
+       help
+         If you say yes here you get support for the temperature and
+         power sensors and capping hardware in various IBM System X
+         servers that support Active Energy Manager.  This includes
+         the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
+         and certain HS2x/LS2x/QS2x blades.
+
+         This driver can also be built as a module.  If so, the module
+         will be called ibmaem.
+
+config SENSORS_IBMPEX
+       tristate "IBM PowerExecutive temperature/power sensors"
+       select IPMI_SI
+       depends on IPMI_HANDLER
+       help
+         If you say yes here you get support for the temperature and
+         power sensors in various IBM System X servers that support
+         PowerExecutive.  So far this includes the x3350, x3550, x3650,
+         x3655, and x3755; the x3800, x3850, and x3950 models that have
+         PCI Express; and some of the HS2x, LS2x, and QS2x blades.
+
+         This driver can also be built as a module.  If so, the module
+         will be called ibmpex.
+

 config SENSORS_IT87
        tristate "ITE IT87xx and compatibles"
 config SENSORS_IT87
        tristate "ITE IT87xx and compatibles"

-       depends on HWMON && I2C
-       select I2C_ISA

        select HWMON_VID
        help
          If you say yes here you get support for ITE IT8705F, IT8712F,
        select HWMON_VID
        help
          If you say yes here you get support for ITE IT8705F, IT8712F,

-         IT8716F and IT8718F sensor chips, and the SiS960 clone.
+         IT8716F, IT8718F and IT8726F sensor chips, and the SiS960 clone.

 
          This driver can also be built as a module.  If so, the module
          will be called it87.
 
 config SENSORS_LM63
        tristate "National Semiconductor LM63"
 
          This driver can also be built as a module.  If so, the module
          will be called it87.
 
 config SENSORS_LM63
        tristate "National Semiconductor LM63"

-       depends on HWMON && I2C
+       depends on I2C

        help
          If you say yes here you get support for the National Semiconductor
          LM63 remote diode digital temperature sensor with integrated fan
        help
          If you say yes here you get support for the National Semiconductor
          LM63 remote diode digital temperature sensor with integrated fan


@@ -263,7 +418,7 @@ config SENSORS_LM63
 
 config SENSORS_LM70
        tristate "National Semiconductor LM70"
 
 config SENSORS_LM70
        tristate "National Semiconductor LM70"

-       depends on HWMON && SPI_MASTER && EXPERIMENTAL
+       depends on SPI_MASTER && EXPERIMENTAL

        help
          If you say yes here you get support for the National Semiconductor
          LM70 digital temperature sensor chip.
        help
          If you say yes here you get support for the National Semiconductor
          LM70 digital temperature sensor chip.


@@ -273,22 +428,33 @@ config SENSORS_LM70
 
 config SENSORS_LM75
        tristate "National Semiconductor LM75 and compatibles"
 
 config SENSORS_LM75
        tristate "National Semiconductor LM75 and compatibles"

-       depends on HWMON && I2C
+       depends on I2C

        help
        help

-         If you say yes here you get support for National Semiconductor LM75
-         sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
-         9-bit precision mode), and TelCom (now Microchip) TCN75.
+         If you say yes here you get support for one common type of
+         temperature sensor chip, with models including:

 
 

-         The DS75 and DS1775 in 10- to 12-bit precision modes will require
-         a force module parameter. The driver will not handle the extra
-         precision anyhow.
+               - Dallas Semiconductor DS75 and DS1775
+               - Maxim MAX6625 and MAX6626
+               - Microchip MCP980x
+               - National Semiconductor LM75
+               - NXP's LM75A
+               - ST Microelectronics STDS75
+               - TelCom (now Microchip) TCN75
+               - Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275
+
+         This driver supports driver model based binding through board
+         specific I2C device tables.
+
+         It also supports the "legacy" style of driver binding.  To use
+         that with some chips which don't replicate LM75 quirks exactly,
+         you may need the "force" module parameter.

 
          This driver can also be built as a module.  If so, the module
          will be called lm75.
 
 config SENSORS_LM77
        tristate "National Semiconductor LM77"
 
          This driver can also be built as a module.  If so, the module
          will be called lm75.
 
 config SENSORS_LM77
        tristate "National Semiconductor LM77"

-       depends on HWMON && I2C
+       depends on I2C

        help
          If you say yes here you get support for National Semiconductor LM77
          sensor chips.
        help
          If you say yes here you get support for National Semiconductor LM77
          sensor chips.


@@ -298,7 +464,7 @@ config SENSORS_LM77
 
 config SENSORS_LM78
        tristate "National Semiconductor LM78 and compatibles"
 
 config SENSORS_LM78
        tristate "National Semiconductor LM78 and compatibles"

-       depends on HWMON && I2C
+       depends on I2C

        select HWMON_VID
        help
          If you say yes here you get support for National Semiconductor LM78,
        select HWMON_VID
        help
          If you say yes here you get support for National Semiconductor LM78,


@@ -309,7 +475,7 @@ config SENSORS_LM78
 
 config SENSORS_LM80
        tristate "National Semiconductor LM80"
 
 config SENSORS_LM80
        tristate "National Semiconductor LM80"

-       depends on HWMON && I2C && EXPERIMENTAL
+       depends on I2C && EXPERIMENTAL

        help
          If you say yes here you get support for National Semiconductor
          LM80 sensor chips.
        help
          If you say yes here you get support for National Semiconductor
          LM80 sensor chips.


@@ -319,7 +485,7 @@ config SENSORS_LM80
 
 config SENSORS_LM83
        tristate "National Semiconductor LM83 and compatibles"
 
 config SENSORS_LM83
        tristate "National Semiconductor LM83 and compatibles"

-       depends on HWMON && I2C
+       depends on I2C

        help
          If you say yes here you get support for National Semiconductor
          LM82 and LM83 sensor chips.
        help
          If you say yes here you get support for National Semiconductor
          LM82 and LM83 sensor chips.


@@ -329,7 +495,7 @@ config SENSORS_LM83
 
 config SENSORS_LM85
        tristate "National Semiconductor LM85 and compatibles"
 
 config SENSORS_LM85
        tristate "National Semiconductor LM85 and compatibles"

-       depends on HWMON && I2C && EXPERIMENTAL
+       depends on I2C && EXPERIMENTAL

        select HWMON_VID
        help
          If you say yes here you get support for National Semiconductor LM85
        select HWMON_VID
        help
          If you say yes here you get support for National Semiconductor LM85


@@ -339,33 +505,31 @@ config SENSORS_LM85
          will be called lm85.
 
 config SENSORS_LM87
          will be called lm85.
 
 config SENSORS_LM87

-       tristate "National Semiconductor LM87"
-       depends on HWMON && I2C
+       tristate "National Semiconductor LM87 and compatibles"
+       depends on I2C

        select HWMON_VID
        help
          If you say yes here you get support for National Semiconductor LM87
        select HWMON_VID
        help
          If you say yes here you get support for National Semiconductor LM87

-         sensor chips.
+         and Analog Devices ADM1024 sensor chips.

 
          This driver can also be built as a module.  If so, the module
          will be called lm87.
 
 config SENSORS_LM90
        tristate "National Semiconductor LM90 and compatibles"
 
          This driver can also be built as a module.  If so, the module
          will be called lm87.
 
 config SENSORS_LM90
        tristate "National Semiconductor LM90 and compatibles"

-       depends on HWMON && I2C
+       depends on I2C

        help
          If you say yes here you get support for National Semiconductor LM90,
        help
          If you say yes here you get support for National Semiconductor LM90,

-         LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
-         MAX6658 sensor chips.
-
-         The Analog Devices ADT7461 sensor chip is also supported, but only
-         if found in ADM1032 compatibility mode.
+         LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, and Maxim
+         MAX6646, MAX6647, MAX6649, MAX6657, MAX6658, MAX6659, MAX6680 and
+         MAX6681 sensor chips.

 
          This driver can also be built as a module.  If so, the module
          will be called lm90.
 
 config SENSORS_LM92
        tristate "National Semiconductor LM92 and compatibles"
 
          This driver can also be built as a module.  If so, the module
          will be called lm90.
 
 config SENSORS_LM92
        tristate "National Semiconductor LM92 and compatibles"

-       depends on HWMON && I2C
+       depends on I2C

        help
          If you say yes here you get support for National Semiconductor LM92
          and Maxim MAX6635 sensor chips.
        help
          If you say yes here you get support for National Semiconductor LM92
          and Maxim MAX6635 sensor chips.


@@ -373,9 +537,29 @@ config SENSORS_LM92
          This driver can also be built as a module.  If so, the module
          will be called lm92.
 
          This driver can also be built as a module.  If so, the module
          will be called lm92.
 

+config SENSORS_LM93
+       tristate "National Semiconductor LM93 and compatibles"
+       depends on I2C
+       select HWMON_VID
+       help
+         If you say yes here you get support for National Semiconductor LM93
+         sensor chips.
+
+         This driver can also be built as a module.  If so, the module
+         will be called lm93.
+
+config SENSORS_MAX1111
+       tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
+       depends on SPI_MASTER
+       help
+         Say y here to support Maxim's MAX1111 ADC chips.
+
+         This driver can also be built as a module.  If so, the module
+         will be called max1111.
+

 config SENSORS_MAX1619
        tristate "Maxim MAX1619 sensor chip"
 config SENSORS_MAX1619
        tristate "Maxim MAX1619 sensor chip"

-       depends on HWMON && I2C
+       depends on I2C

        help
          If you say yes here you get support for MAX1619 sensor chip.
 
        help
          If you say yes here you get support for MAX1619 sensor chip.
 


@@ -384,7 +568,7 @@ config SENSORS_MAX1619
 
 config SENSORS_MAX6650
        tristate "Maxim MAX6650 sensor chip"
 
 config SENSORS_MAX6650
        tristate "Maxim MAX6650 sensor chip"

-       depends on HWMON && I2C && EXPERIMENTAL
+       depends on I2C && EXPERIMENTAL

        help
          If you say yes here you get support for the MAX6650 / MAX6651
          sensor chips.
        help
          If you say yes here you get support for the MAX6650 / MAX6651
          sensor chips.


@@ -394,8 +578,6 @@ config SENSORS_MAX6650
 
 config SENSORS_PC87360
        tristate "National Semiconductor PC87360 family"
 
 config SENSORS_PC87360
        tristate "National Semiconductor PC87360 family"

-       depends on HWMON && I2C && EXPERIMENTAL
-       select I2C_ISA

        select HWMON_VID
        help
          If you say yes here you get access to the hardware monitoring
        select HWMON_VID
        help
          If you say yes here you get access to the hardware monitoring


@@ -409,7 +591,7 @@ config SENSORS_PC87360
 
 config SENSORS_PC87427
        tristate "National Semiconductor PC87427"
 
 config SENSORS_PC87427
        tristate "National Semiconductor PC87427"

-       depends on HWMON && EXPERIMENTAL
+       depends on EXPERIMENTAL

        help
          If you say yes here you get access to the hardware monitoring
          functions of the National Semiconductor PC87427 Super-I/O chip.
        help
          If you say yes here you get access to the hardware monitoring
          functions of the National Semiconductor PC87427 Super-I/O chip.


@@ -422,8 +604,7 @@ config SENSORS_PC87427
 
 config SENSORS_SIS5595
        tristate "Silicon Integrated Systems Corp. SiS5595"
 
 config SENSORS_SIS5595
        tristate "Silicon Integrated Systems Corp. SiS5595"

-       depends on HWMON && I2C && PCI && EXPERIMENTAL
-       select I2C_ISA
+       depends on PCI

        help
          If you say yes here you get support for the integrated sensors in
          SiS5595 South Bridges.
        help
          If you say yes here you get support for the integrated sensors in
          SiS5595 South Bridges.


@@ -431,9 +612,20 @@ config SENSORS_SIS5595
          This driver can also be built as a module.  If so, the module
          will be called sis5595.
 
          This driver can also be built as a module.  If so, the module
          will be called sis5595.
 

+config SENSORS_DME1737
+       tristate "SMSC DME1737, SCH311x and compatibles"
+       depends on I2C && EXPERIMENTAL
+       select HWMON_VID
+       help
+         If you say yes here you get support for the hardware monitoring
+         and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
+         Asus A8000 Super-I/O chips.
+
+         This driver can also be built as a module.  If so, the module
+         will be called dme1737.
+

 config SENSORS_SMSC47M1
        tristate "SMSC LPC47M10x and compatibles"
 config SENSORS_SMSC47M1
        tristate "SMSC LPC47M10x and compatibles"

-       depends on HWMON

        help
          If you say yes here you get support for the integrated fan
          monitoring and control capabilities of the SMSC LPC47B27x,
        help
          If you say yes here you get support for the integrated fan
          monitoring and control capabilities of the SMSC LPC47B27x,


@@ -450,7 +642,7 @@ config SENSORS_SMSC47M1
 
 config SENSORS_SMSC47M192
        tristate "SMSC LPC47M192 and compatibles"
 
 config SENSORS_SMSC47M192
        tristate "SMSC LPC47M192 and compatibles"

-       depends on HWMON && I2C && EXPERIMENTAL
+       depends on I2C && EXPERIMENTAL

        select HWMON_VID
        help
          If you say yes here you get support for the temperature and
        select HWMON_VID
        help
          If you say yes here you get support for the temperature and


@@ -467,8 +659,7 @@ config SENSORS_SMSC47M192
 
 config SENSORS_SMSC47B397
        tristate "SMSC LPC47B397-NC"
 
 config SENSORS_SMSC47B397
        tristate "SMSC LPC47B397-NC"

-       depends on HWMON && I2C && EXPERIMENTAL
-       select I2C_ISA
+       depends on EXPERIMENTAL

        help
          If you say yes here you get support for the SMSC LPC47B397-NC
          sensor chip.
        help
          If you say yes here you get support for the SMSC LPC47B397-NC
          sensor chip.


@@ -476,10 +667,29 @@ config SENSORS_SMSC47B397
          This driver can also be built as a module.  If so, the module
          will be called smsc47b397.
 
          This driver can also be built as a module.  If so, the module
          will be called smsc47b397.
 

+config SENSORS_ADS7828
+       tristate "Texas Instruments ADS7828"
+       depends on I2C
+       help
+         If you say yes here you get support for Texas Instruments ADS7828
+         12-bit 8-channel ADC device.
+
+         This driver can also be built as a module.  If so, the module
+         will be called ads7828.
+
+config SENSORS_THMC50
+       tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
+       depends on I2C && EXPERIMENTAL
+       help
+         If you say yes here you get support for Texas Instruments THMC50
+         sensor chips and clones: the Analog Devices ADM1022.
+
+         This driver can also be built as a module.  If so, the module
+         will be called thmc50.
+

 config SENSORS_VIA686A
        tristate "VIA686A"
 config SENSORS_VIA686A
        tristate "VIA686A"

-       depends on HWMON && I2C && PCI
-       select I2C_ISA
+       depends on PCI

        help
          If you say yes here you get support for the integrated sensors in
          Via 686A/B South Bridges.
        help
          If you say yes here you get support for the integrated sensors in
          Via 686A/B South Bridges.


@@ -489,7 +699,7 @@ config SENSORS_VIA686A
 
 config SENSORS_VT1211
        tristate "VIA VT1211"
 
 config SENSORS_VT1211
        tristate "VIA VT1211"

-       depends on HWMON && EXPERIMENTAL
+       depends on EXPERIMENTAL

        select HWMON_VID
        help
          If you say yes here then you get support for hardware monitoring
        select HWMON_VID
        help
          If you say yes here then you get support for hardware monitoring


@@ -500,9 +710,8 @@ config SENSORS_VT1211
 
 config SENSORS_VT8231
        tristate "VIA VT8231"
 
 config SENSORS_VT8231
        tristate "VIA VT8231"

-       depends on HWMON && I2C && PCI && EXPERIMENTAL
+       depends on PCI

        select HWMON_VID
        select HWMON_VID

-       select I2C_ISA

        help
          If you say yes here then you get support for the integrated sensors
          in the VIA VT8231 device.
        help
          If you say yes here then you get support for the integrated sensors
          in the VIA VT8231 device.


@@ -511,21 +720,20 @@ config SENSORS_VT8231
          will be called vt8231.
 
 config SENSORS_W83781D
          will be called vt8231.
 
 config SENSORS_W83781D

-       tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
-       depends on HWMON && I2C
-       select I2C_ISA
+       tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
+       depends on I2C

        select HWMON_VID
        help
          If you say yes here you get support for the Winbond W8378x series
        select HWMON_VID
        help
          If you say yes here you get support for the Winbond W8378x series

-         of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
-         and the similar Asus AS99127F.
+         of sensor chips: the W83781D, W83782D and W83783S, and the similar
+         Asus AS99127F.

 
          This driver can also be built as a module.  If so, the module
          will be called w83781d.
 
 config SENSORS_W83791D
        tristate "Winbond W83791D"
 
          This driver can also be built as a module.  If so, the module
          will be called w83781d.
 
 config SENSORS_W83791D
        tristate "Winbond W83791D"

-       depends on HWMON && I2C && EXPERIMENTAL
+       depends on I2C && EXPERIMENTAL

        select HWMON_VID
        help
          If you say yes here you get support for the Winbond W83791D chip.
        select HWMON_VID
        help
          If you say yes here you get support for the Winbond W83791D chip.


@@ -535,7 +743,7 @@ config SENSORS_W83791D
 
 config SENSORS_W83792D
        tristate "Winbond W83792D"
 
 config SENSORS_W83792D
        tristate "Winbond W83792D"

-       depends on HWMON && I2C && EXPERIMENTAL
+       depends on I2C && EXPERIMENTAL

        help
          If you say yes here you get support for the Winbond W83792D chip.
 
        help
          If you say yes here you get support for the Winbond W83792D chip.
 


@@ -544,7 +752,7 @@ config SENSORS_W83792D
 
 config SENSORS_W83793
        tristate "Winbond W83793"
 
 config SENSORS_W83793
        tristate "Winbond W83793"

-       depends on HWMON && I2C && EXPERIMENTAL
+       depends on I2C && EXPERIMENTAL

        select HWMON_VID
        help
          If you say yes here you get support for the Winbond W83793
        select HWMON_VID
        help
          If you say yes here you get support for the Winbond W83793


@@ -555,7 +763,7 @@ config SENSORS_W83793
 
 config SENSORS_W83L785TS
        tristate "Winbond W83L785TS-S"
 
 config SENSORS_W83L785TS
        tristate "Winbond W83L785TS-S"

-       depends on HWMON && I2C && EXPERIMENTAL
+       depends on I2C && EXPERIMENTAL

        help
          If you say yes here you get support for the Winbond W83L785TS-S
          sensor chip, which is used on the Asus A7N8X, among other
        help
          If you say yes here you get support for the Winbond W83L785TS-S
          sensor chip, which is used on the Asus A7N8X, among other


@@ -564,9 +772,18 @@ config SENSORS_W83L785TS
          This driver can also be built as a module.  If so, the module
          will be called w83l785ts.
 
          This driver can also be built as a module.  If so, the module
          will be called w83l785ts.
 

+config SENSORS_W83L786NG
+       tristate "Winbond W83L786NG, W83L786NR"
+       depends on I2C && EXPERIMENTAL
+       help
+         If you say yes here you get support for the Winbond W83L786NG
+         and W83L786NR sensor chips.
+
+         This driver can also be built as a module.  If so, the module
+         will be called w83l786ng.
+

 config SENSORS_W83627HF
        tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
 config SENSORS_W83627HF
        tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"

-       depends on HWMON

        select HWMON_VID
        help
          If you say yes here you get support for the Winbond W836X7 series
        select HWMON_VID
        help
          If you say yes here you get support for the Winbond W836X7 series


@@ -577,24 +794,31 @@ config SENSORS_W83627HF
          will be called w83627hf.
 
 config SENSORS_W83627EHF
          will be called w83627hf.
 
 config SENSORS_W83627EHF

-       tristate "Winbond W83627EHF"
-       depends on HWMON && I2C && EXPERIMENTAL
-       select I2C_ISA
+       tristate "Winbond W83627EHF/DHG"
+       select HWMON_VID

        help
        help

-         If you say yes here you get preliminary support for the hardware
+         If you say yes here you get support for the hardware

          monitoring functionality of the Winbond W83627EHF Super-I/O chip.
          monitoring functionality of the Winbond W83627EHF Super-I/O chip.

-         Only fan and temperature inputs are supported at the moment, while
-         the chip does much more than that.

 
          This driver also supports the W83627EHG, which is the lead-free
 
          This driver also supports the W83627EHG, which is the lead-free

-         version of the W83627EHF.
+         version of the W83627EHF, and the W83627DHG, which is a similar
+         chip suited for specific Intel processors that use PECI such as
+         the Core 2 Duo.

 
          This driver can also be built as a module.  If so, the module
          will be called w83627ehf.
 
 
          This driver can also be built as a module.  If so, the module
          will be called w83627ehf.
 

+config SENSORS_ULTRA45
+       tristate "Sun Ultra45 PIC16F747"
+       depends on SPARC64
+       help
+         This driver provides support for the Ultra45 workstation environmental
+         sensors.
+

 config SENSORS_HDAPS
        tristate "IBM Hard Drive Active Protection System (hdaps)"
 config SENSORS_HDAPS
        tristate "IBM Hard Drive Active Protection System (hdaps)"

-       depends on HWMON && INPUT && X86
+       depends on INPUT && X86
+       select INPUT_POLLDEV

        default n
        help
          This driver provides support for the IBM Hard Drive Active Protection
        default n
        help
          This driver provides support for the IBM Hard Drive Active Protection


@@ -611,9 +835,52 @@ config SENSORS_HDAPS
          Say Y here if you have an applicable laptop and want to experience
          the awesome power of hdaps.
 
          Say Y here if you have an applicable laptop and want to experience
          the awesome power of hdaps.
 

+config SENSORS_LIS3LV02D
+       tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer"
+       depends on ACPI && INPUT
+       default n
+       help
+         This driver provides support for the LIS3LV02Dx accelerometer. In
+         particular, it can be found in a number of HP laptops, which have the
+         "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such
+         systems the driver should load automatically (via ACPI). The
+         accelerometer might also be found in other systems, connected via SPI
+         or I2C.  The accelerometer data is readable via
+         /sys/devices/platform/lis3lv02d.
+
+         This driver also provides an absolute input class device, allowing
+         the laptop to act as a pinball machine-esque joystick.
+
+         This driver can also be built as a module.  If so, the module
+         will be called lis3lv02d.
+
+config SENSORS_APPLESMC
+       tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
+       depends on INPUT && X86
+       select NEW_LEDS
+       select LEDS_CLASS
+       select INPUT_POLLDEV
+       default n
+       help
+         This driver provides support for the Apple System Management
+         Controller, which provides an accelerometer (Apple Sudden Motion
+         Sensor), light sensors, temperature sensors, keyboard backlight
+         control and fan control.
+
+         Only Intel-based Apple's computers are supported (MacBook Pro,
+         MacBook, MacMini).
+
+         Data from the different sensors, keyboard backlight control and fan
+         control are accessible via sysfs.
+
+         This driver also provides an absolute input class device, allowing
+         the laptop to act as a pinball machine-esque joystick.
+
+         Say Y here if you have an applicable laptop and want to experience
+         the awesome power of applesmc.
+

 config HWMON_DEBUG_CHIP
        bool "Hardware Monitoring Chip debugging messages"
 config HWMON_DEBUG_CHIP
        bool "Hardware Monitoring Chip debugging messages"

-       depends on HWMON

        default n
        help
          Say Y here if you want the I2C chip drivers to produce a bunch of
        default n
        help
          Say Y here if you want the I2C chip drivers to produce a bunch of


@@ -621,4 +888,4 @@ config HWMON_DEBUG_CHIP
          a problem with I2C support and want to see more of what is going
          on.
 
          a problem with I2C support and want to see more of what is going
          on.
 

-endmenu
+endif # HWMON