+static void mv_soc_65n_phy_errata(struct mv_host_priv *hpriv,
+ void __iomem *mmio, unsigned int port)
+{
+ void __iomem *port_mmio = mv_port_base(mmio, port);
+ u32 reg;
+
+ reg = readl(port_mmio + PHY_MODE3);
+ reg &= ~(0x3 << 27); /* SELMUPF (bits 28:27) to 1 */
+ reg |= (0x1 << 27);
+ reg &= ~(0x3 << 29); /* SELMUPI (bits 30:29) to 1 */
+ reg |= (0x1 << 29);
+ writel(reg, port_mmio + PHY_MODE3);
+
+ reg = readl(port_mmio + PHY_MODE4);
+ reg &= ~0x1; /* SATU_OD8 (bit 0) to 0, reserved bit 16 must be set */
+ reg |= (0x1 << 16);
+ writel(reg, port_mmio + PHY_MODE4);
+
+ reg = readl(port_mmio + PHY_MODE9_GEN2);
+ reg &= ~0xf; /* TXAMP[3:0] (bits 3:0) to 8 */
+ reg |= 0x8;
+ reg &= ~(0x1 << 14); /* TXAMP[4] (bit 14) to 0 */
+ writel(reg, port_mmio + PHY_MODE9_GEN2);
+
+ reg = readl(port_mmio + PHY_MODE9_GEN1);
+ reg &= ~0xf; /* TXAMP[3:0] (bits 3:0) to 8 */
+ reg |= 0x8;
+ reg &= ~(0x1 << 14); /* TXAMP[4] (bit 14) to 0 */
+ writel(reg, port_mmio + PHY_MODE9_GEN1);
+}
+
+/**
+ * soc_is_65 - check if the soc is 65 nano device
+ *
+ * Detect the type of the SoC, this is done by reading the PHYCFG_OFS
+ * register, this register should contain non-zero value and it exists only
+ * in the 65 nano devices, when reading it from older devices we get 0.
+ */
+static bool soc_is_65n(struct mv_host_priv *hpriv)
+{
+ void __iomem *port0_mmio = mv_port_base(hpriv->base, 0);
+
+ if (readl(port0_mmio + PHYCFG_OFS))
+ return true;
+ return false;
+}
+