-MODULE_AUTHOR("Paul Diefenbaugh");
-MODULE_DESCRIPTION("ACPI Processor Driver");
-MODULE_LICENSE("GPL");
-
-static int acpi_processor_add(struct acpi_device *device);
-static int acpi_processor_start(struct acpi_device *device);
-static int acpi_processor_remove(struct acpi_device *device, int type);
-static int acpi_processor_info_open_fs(struct inode *inode, struct file *file);
-static void acpi_processor_notify(acpi_handle handle, u32 event, void *data);
-static acpi_status acpi_processor_hotadd_init(acpi_handle handle, int *p_cpu);
-static int acpi_processor_handle_eject(struct acpi_processor *pr);
-extern int acpi_processor_tstate_has_changed(struct acpi_processor *pr);
-
-
-static const struct acpi_device_id processor_device_ids[] = {
- {ACPI_PROCESSOR_HID, 0},
- {"", 0},
-};
-MODULE_DEVICE_TABLE(acpi, processor_device_ids);
-
-static struct acpi_driver acpi_processor_driver = {
- .name = "processor",
- .class = ACPI_PROCESSOR_CLASS,
- .ids = processor_device_ids,
- .ops = {
- .add = acpi_processor_add,
- .remove = acpi_processor_remove,
- .start = acpi_processor_start,
- .suspend = acpi_processor_suspend,
- .resume = acpi_processor_resume,
- },
-};
-
-#define INSTALL_NOTIFY_HANDLER 1
-#define UNINSTALL_NOTIFY_HANDLER 2
-
-static const struct file_operations acpi_processor_info_fops = {
- .open = acpi_processor_info_open_fs,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-struct acpi_processor *processors[NR_CPUS];
-struct acpi_processor_errata errata __read_mostly;
-
-/* --------------------------------------------------------------------------
- Errata Handling
- -------------------------------------------------------------------------- */
-
-static int acpi_processor_errata_piix4(struct pci_dev *dev)
-{
- u8 value1 = 0;
- u8 value2 = 0;
-
-
- if (!dev)
- return -EINVAL;
-
- /*
- * Note that 'dev' references the PIIX4 ACPI Controller.
- */
-
- switch (dev->revision) {
- case 0:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 A-step\n"));
- break;
- case 1:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 B-step\n"));
- break;
- case 2:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4E\n"));
- break;
- case 3:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4M\n"));
- break;
- default:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found unknown PIIX4\n"));
- break;
- }
-
- switch (dev->revision) {
-
- case 0: /* PIIX4 A-step */
- case 1: /* PIIX4 B-step */
- /*
- * See specification changes #13 ("Manual Throttle Duty Cycle")
- * and #14 ("Enabling and Disabling Manual Throttle"), plus
- * erratum #5 ("STPCLK# Deassertion Time") from the January
- * 2002 PIIX4 specification update. Applies to only older
- * PIIX4 models.
- */
- errata.piix4.throttle = 1;
-
- case 2: /* PIIX4E */
- case 3: /* PIIX4M */
- /*
- * See erratum #18 ("C3 Power State/BMIDE and Type-F DMA
- * Livelock") from the January 2002 PIIX4 specification update.
- * Applies to all PIIX4 models.
- */
-
- /*
- * BM-IDE
- * ------
- * Find the PIIX4 IDE Controller and get the Bus Master IDE
- * Status register address. We'll use this later to read
- * each IDE controller's DMA status to make sure we catch all
- * DMA activity.
- */
- dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
- PCI_DEVICE_ID_INTEL_82371AB,
- PCI_ANY_ID, PCI_ANY_ID, NULL);
- if (dev) {
- errata.piix4.bmisx = pci_resource_start(dev, 4);
- pci_dev_put(dev);
- }
-
- /*
- * Type-F DMA
- * ----------
- * Find the PIIX4 ISA Controller and read the Motherboard
- * DMA controller's status to see if Type-F (Fast) DMA mode
- * is enabled (bit 7) on either channel. Note that we'll
- * disable C3 support if this is enabled, as some legacy
- * devices won't operate well if fast DMA is disabled.
- */
- dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
- PCI_DEVICE_ID_INTEL_82371AB_0,
- PCI_ANY_ID, PCI_ANY_ID, NULL);
- if (dev) {
- pci_read_config_byte(dev, 0x76, &value1);
- pci_read_config_byte(dev, 0x77, &value2);
- if ((value1 & 0x80) || (value2 & 0x80))
- errata.piix4.fdma = 1;
- pci_dev_put(dev);
- }
-
- break;
- }
-
- if (errata.piix4.bmisx)
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Bus master activity detection (BM-IDE) erratum enabled\n"));
- if (errata.piix4.fdma)
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Type-F DMA livelock erratum (C3 disabled)\n"));
-
- return 0;
-}
-
-static int acpi_processor_errata(struct acpi_processor *pr)
-{
- int result = 0;
- struct pci_dev *dev = NULL;
-
-
- if (!pr)
- return -EINVAL;
-
- /*
- * PIIX4
- */
- dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
- PCI_DEVICE_ID_INTEL_82371AB_3, PCI_ANY_ID,
- PCI_ANY_ID, NULL);
- if (dev) {
- result = acpi_processor_errata_piix4(dev);
- pci_dev_put(dev);
- }
-
- return result;
-}
-
-/* --------------------------------------------------------------------------
- Common ACPI processor functions
- -------------------------------------------------------------------------- */
-
-/*
- * _PDC is required for a BIOS-OS handshake for most of the newer
- * ACPI processor features.
- */
-static int acpi_processor_set_pdc(struct acpi_processor *pr)
-{
- struct acpi_object_list *pdc_in = pr->pdc;
- acpi_status status = AE_OK;
-
-
- if (!pdc_in)
- return status;
-
- status = acpi_evaluate_object(pr->handle, "_PDC", pdc_in, NULL);
-
- if (ACPI_FAILURE(status))
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Could not evaluate _PDC, using legacy perf. control...\n"));
-
- return status;
-}
-
-/* --------------------------------------------------------------------------
- FS Interface (/proc)
- -------------------------------------------------------------------------- */
-
-static struct proc_dir_entry *acpi_processor_dir = NULL;
-
-static int acpi_processor_info_seq_show(struct seq_file *seq, void *offset)