+
+void __devinit pcibios_setup_phb_resources(struct pci_controller *hose)
+{
+ struct pci_bus *bus = hose->bus;
+ struct resource *res;
+ int i;
+
+ /* Hookup PHB IO resource */
+ bus->resource[0] = res = &hose->io_resource;
+
+ if (!res->flags) {
+ printk(KERN_WARNING "PCI: I/O resource not set for host"
+ " bridge %s (domain %d)\n",
+ hose->dn->full_name, hose->global_number);
+#ifdef CONFIG_PPC32
+ /* Workaround for lack of IO resource only on 32-bit */
+ res->start = (unsigned long)hose->io_base_virt - isa_io_base;
+ res->end = res->start + IO_SPACE_LIMIT;
+ res->flags = IORESOURCE_IO;
+#endif /* CONFIG_PPC32 */
+ }
+
+ pr_debug("PCI: PHB IO resource = %016llx-%016llx [%lx]\n",
+ (unsigned long long)res->start,
+ (unsigned long long)res->end,
+ (unsigned long)res->flags);
+
+ /* Hookup PHB Memory resources */
+ for (i = 0; i < 3; ++i) {
+ res = &hose->mem_resources[i];
+ if (!res->flags) {
+ if (i > 0)
+ continue;
+ printk(KERN_ERR "PCI: Memory resource 0 not set for "
+ "host bridge %s (domain %d)\n",
+ hose->dn->full_name, hose->global_number);
+#ifdef CONFIG_PPC32
+ /* Workaround for lack of MEM resource only on 32-bit */
+ res->start = hose->pci_mem_offset;
+ res->end = (resource_size_t)-1LL;
+ res->flags = IORESOURCE_MEM;
+#endif /* CONFIG_PPC32 */
+ }
+ bus->resource[i+1] = res;
+
+ pr_debug("PCI: PHB MEM resource %d = %016llx-%016llx [%lx]\n", i,
+ (unsigned long long)res->start,
+ (unsigned long long)res->end,
+ (unsigned long)res->flags);
+ }
+
+ pr_debug("PCI: PHB MEM offset = %016llx\n",
+ (unsigned long long)hose->pci_mem_offset);
+ pr_debug("PCI: PHB IO offset = %08lx\n",
+ (unsigned long)hose->io_base_virt - _IO_BASE);
+
+}
+
+/*
+ * Null PCI config access functions, for the case when we can't
+ * find a hose.
+ */
+#define NULL_PCI_OP(rw, size, type) \
+static int \
+null_##rw##_config_##size(struct pci_dev *dev, int offset, type val) \
+{ \
+ return PCIBIOS_DEVICE_NOT_FOUND; \
+}
+
+static int
+null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 *val)
+{
+ return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static int
+null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 val)
+{
+ return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static struct pci_ops null_pci_ops =
+{
+ .read = null_read_config,
+ .write = null_write_config,
+};
+
+/*
+ * These functions are used early on before PCI scanning is done
+ * and all of the pci_dev and pci_bus structures have been created.
+ */
+static struct pci_bus *
+fake_pci_bus(struct pci_controller *hose, int busnr)
+{
+ static struct pci_bus bus;
+
+ if (hose == 0) {
+ printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
+ }
+ bus.number = busnr;
+ bus.sysdata = hose;
+ bus.ops = hose? hose->ops: &null_pci_ops;
+ return &bus;
+}
+
+#define EARLY_PCI_OP(rw, size, type) \
+int early_##rw##_config_##size(struct pci_controller *hose, int bus, \
+ int devfn, int offset, type value) \
+{ \
+ return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus), \
+ devfn, offset, value); \
+}
+
+EARLY_PCI_OP(read, byte, u8 *)
+EARLY_PCI_OP(read, word, u16 *)
+EARLY_PCI_OP(read, dword, u32 *)
+EARLY_PCI_OP(write, byte, u8)
+EARLY_PCI_OP(write, word, u16)
+EARLY_PCI_OP(write, dword, u32)
+
+extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, int cap);
+int early_find_capability(struct pci_controller *hose, int bus, int devfn,
+ int cap)
+{
+ return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap);
+}
+
+/**
+ * pci_scan_phb - Given a pci_controller, setup and scan the PCI bus
+ * @hose: Pointer to the PCI host controller instance structure
+ * @sysdata: value to use for sysdata pointer. ppc32 and ppc64 differ here
+ *
+ * Note: the 'data' pointer is a temporary measure. As 32 and 64 bit
+ * pci code gets merged, this parameter should become unnecessary because
+ * both will use the same value.
+ */
+void __devinit pcibios_scan_phb(struct pci_controller *hose, void *sysdata)
+{
+ struct pci_bus *bus;
+ struct device_node *node = hose->dn;
+ int mode;
+
+ pr_debug("PCI: Scanning PHB %s\n",
+ node ? node->full_name : "<NO NAME>");
+
+ /* Create an empty bus for the toplevel */
+ bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops,
+ sysdata);
+ if (bus == NULL) {
+ pr_err("Failed to create bus for PCI domain %04x\n",
+ hose->global_number);
+ return;
+ }
+ bus->secondary = hose->first_busno;
+ hose->bus = bus;
+
+ /* Get some IO space for the new PHB */
+ pcibios_setup_phb_io_space(hose);
+
+ /* Wire up PHB bus resources */
+ pcibios_setup_phb_resources(hose);
+
+ /* Get probe mode and perform scan */
+ mode = PCI_PROBE_NORMAL;
+ if (node && ppc_md.pci_probe_mode)
+ mode = ppc_md.pci_probe_mode(bus);
+ pr_debug(" probe mode: %d\n", mode);
+ if (mode == PCI_PROBE_DEVTREE) {
+ bus->subordinate = hose->last_busno;
+ of_scan_bus(node, bus);
+ }
+
+ if (mode == PCI_PROBE_NORMAL)
+ hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
+}