arch/alpha/boot/tools/objstrip.c: Mark "usage" static

[safe/jmp/linux-2.6] / arch / powerpc / Kconfig.debug

diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index c939fe8..3b10051 100644 (file)
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -2,6 +2,32 @@ menu "Kernel hacking"
 
 source "lib/Kconfig.debug"
 
 
 source "lib/Kconfig.debug"
 

+config PPC_DISABLE_WERROR
+       bool "Don't build arch/powerpc code with -Werror"
+       default n
+       help
+         This option tells the compiler NOT to build the code under
+         arch/powerpc with the -Werror flag (which means warnings
+         are treated as errors).
+
+         Only enable this if you are hitting a build failure in the
+         arch/powerpc code caused by a warning, and you don't feel
+         inclined to fix it.
+
+config PPC_WERROR
+       bool
+       depends on !PPC_DISABLE_WERROR
+       default y
+
+config PRINT_STACK_DEPTH
+       int "Stack depth to print" if DEBUG_KERNEL
+       default 64
+       help
+         This option allows you to set the stack depth that the kernel
+         prints in stack traces. This can be useful if your display is
+         too small and stack traces cause important information to
+         scroll off the screen.
+

 config DEBUG_STACKOVERFLOW
        bool "Check for stack overflows"
        depends on DEBUG_KERNEL
 config DEBUG_STACKOVERFLOW
        bool "Check for stack overflows"
        depends on DEBUG_KERNEL


@@ -18,15 +44,6 @@ config DEBUG_STACK_USAGE
 
          This option will slow down process creation somewhat.
 
 
          This option will slow down process creation somewhat.
 

-config DEBUG_PAGEALLOC
-        bool "Debug page memory allocations"
-        depends on DEBUG_KERNEL && !HIBERNATION
-        help
-          Unmap pages from the kernel linear mapping after free_pages().
-          This results in a large slowdown, but helps to find certain types
-          of memory corruptions.
-
-

 config HCALL_STATS
        bool "Hypervisor call instrumentation"
        depends on PPC_PSERIES && DEBUG_FS
 config HCALL_STATS
        bool "Hypervisor call instrumentation"
        depends on PPC_PSERIES && DEBUG_FS


@@ -41,52 +58,37 @@ config HCALL_STATS
          This option will add a small amount of overhead to all hypervisor
          calls.
 
          This option will add a small amount of overhead to all hypervisor
          calls.
 

-config DEBUGGER
-       bool "Enable debugger hooks"
-       depends on DEBUG_KERNEL
-       help
-         Include in-kernel hooks for kernel debuggers. Unless you are
-         intending to debug the kernel, say N here.
-
-config KGDB
-       bool "Include kgdb kernel debugger"
-       depends on DEBUGGER && (BROKEN || PPC_GEN550 || 4xx)
-       select DEBUG_INFO
+config PPC_EMULATED_STATS
+       bool "Emulated instructions tracking"
+       depends on DEBUG_FS

        help
        help

-         Include in-kernel hooks for kgdb, the Linux kernel source level
-         debugger.  See <http://kgdb.sourceforge.net/> for more information.
-         Unless you are intending to debug the kernel, say N here.
-
-choice
-       prompt "Serial Port"
-       depends on KGDB
-       default KGDB_TTYS1
-
-config KGDB_TTYS0
-       bool "ttyS0"
-
-config KGDB_TTYS1
-       bool "ttyS1"
-
-config KGDB_TTYS2
-       bool "ttyS2"
-
-config KGDB_TTYS3
-       bool "ttyS3"
+         Adds code to keep track of the number of instructions that are
+         emulated by the in-kernel emulator. Counters for the various classes
+         of emulated instructions are available under
+         powerpc/emulated_instructions/ in the root of the debugfs file
+         system. Optionally (controlled by
+         powerpc/emulated_instructions/do_warn in debugfs), rate-limited
+         warnings can be printed to the console when instructions are
+         emulated.
+
+config CODE_PATCHING_SELFTEST
+       bool "Run self-tests of the code-patching code."
+       depends on DEBUG_KERNEL
+       default n

 
 

-endchoice
+config FTR_FIXUP_SELFTEST
+       bool "Run self-tests of the feature-fixup code."
+       depends on DEBUG_KERNEL
+       default n

 
 

-config KGDB_CONSOLE
-       bool "Enable serial console thru kgdb port"
-       depends on KGDB && 8xx || CPM2
-       help
-         If you enable this, all serial console messages will be sent
-         over the gdb stub.
-         If unsure, say N.
+config MSI_BITMAP_SELFTEST
+       bool "Run self-tests of the MSI bitmap code."
+       depends on DEBUG_KERNEL
+       default n

 
 config XMON
        bool "Include xmon kernel debugger"
 
 config XMON
        bool "Include xmon kernel debugger"

-       depends on DEBUGGER
+       depends on DEBUG_KERNEL

        help
          Include in-kernel hooks for the xmon kernel monitor/debugger.
          Unless you are intending to debug the kernel, say N here.
        help
          Include in-kernel hooks for the xmon kernel monitor/debugger.
          Unless you are intending to debug the kernel, say N here.


@@ -116,9 +118,13 @@ config XMON_DISASSEMBLY
          to say Y here, unless you're building for a memory-constrained
          system.
 
          to say Y here, unless you're building for a memory-constrained
          system.
 

+config DEBUGGER
+       bool
+       depends on KGDB || XMON
+       default y
+

 config IRQSTACKS
        bool "Use separate kernel stacks when processing interrupts"
 config IRQSTACKS
        bool "Use separate kernel stacks when processing interrupts"

-       depends on PPC64

        help
          If you say Y here the kernel will use separate kernel stacks
          for handling hard and soft interrupts.  This can help avoid
        help
          If you say Y here the kernel will use separate kernel stacks
          for handling hard and soft interrupts.  This can help avoid


@@ -126,7 +132,7 @@ config IRQSTACKS
 
 config VIRQ_DEBUG
        bool "Expose hardware/virtual IRQ mapping via debugfs"
 
 config VIRQ_DEBUG
        bool "Expose hardware/virtual IRQ mapping via debugfs"

-       depends on DEBUG_FS && PPC_MERGE
+       depends on DEBUG_FS

        help
          This option will show the mapping relationship between hardware irq
          numbers and virtual irq numbers. The mapping is exposed via debugfs
        help
          This option will show the mapping relationship between hardware irq
          numbers and virtual irq numbers. The mapping is exposed via debugfs


@@ -144,13 +150,23 @@ config BDI_SWITCH
 
 config BOOTX_TEXT
        bool "Support for early boot text console (BootX or OpenFirmware only)"
 
 config BOOTX_TEXT
        bool "Support for early boot text console (BootX or OpenFirmware only)"

-       depends on PPC_OF && PPC_MULTIPLATFORM
+       depends on PPC_OF && PPC_BOOK3S

        help
          Say Y here to see progress messages from the boot firmware in text
          mode. Requires either BootX or Open Firmware.
 
 config PPC_EARLY_DEBUG
        bool "Early debugging (dangerous)"
        help
          Say Y here to see progress messages from the boot firmware in text
          mode. Requires either BootX or Open Firmware.
 
 config PPC_EARLY_DEBUG
        bool "Early debugging (dangerous)"

+       # PPC_EARLY_DEBUG on 440 leaves AS=1 mappings above the TLB high water
+       # mark, which doesn't work with current 440 KVM.
+       depends on !KVM
+       help
+         Say Y to enable some early debugging facilities that may be available
+         for your processor/board combination. Those facilities are hacks
+         intended to debug problems early during boot, this should not be
+         enabled in a production kernel.
+         Note that enabling this will also cause the kernel default log level
+         to be pushed to max automatically very early during boot

 
 choice
        prompt "Early debugging console"
 
 choice
        prompt "Early debugging console"


@@ -216,10 +232,18 @@ config PPC_EARLY_DEBUG_BEAT
 config PPC_EARLY_DEBUG_44x
        bool "Early serial debugging for IBM/AMCC 44x CPUs"
        depends on 44x
 config PPC_EARLY_DEBUG_44x
        bool "Early serial debugging for IBM/AMCC 44x CPUs"
        depends on 44x

-       select PPC_UDBG_16550

        help
          Select this to enable early debugging for IBM 44x chips via the
        help
          Select this to enable early debugging for IBM 44x chips via the

-         inbuilt serial port.
+         inbuilt serial port.  If you enable this, ensure you set
+          PPC_EARLY_DEBUG_44x_PHYSLOW below to suit your target board.
+
+config PPC_EARLY_DEBUG_40x
+       bool "Early serial debugging for IBM/AMCC 40x CPUs"
+       depends on 40x
+       help
+         Select this to enable early debugging for IBM 40x chips via the
+         inbuilt serial port. This works on chips with a 16550 compatible
+         UART. Xilinx chips with uartlite cannot use this option.

 
 config PPC_EARLY_DEBUG_CPM
        bool "Early serial debugging for Freescale CPM-based serial ports"
 
 config PPC_EARLY_DEBUG_CPM
        bool "Early serial debugging for Freescale CPM-based serial ports"


@@ -236,17 +260,25 @@ config PPC_EARLY_DEBUG_44x_PHYSLOW
        hex "Low 32 bits of early debug UART physical address"
        depends on PPC_EARLY_DEBUG_44x
        default "0x40000200"
        hex "Low 32 bits of early debug UART physical address"
        depends on PPC_EARLY_DEBUG_44x
        default "0x40000200"

+       help
+         You probably want 0x40000200 for ebony boards and
+          0x40000300 for taishan

 
 config PPC_EARLY_DEBUG_44x_PHYSHIGH
        hex "EPRN of early debug UART physical address"
        depends on PPC_EARLY_DEBUG_44x
        default "0x1"
 
 
 config PPC_EARLY_DEBUG_44x_PHYSHIGH
        hex "EPRN of early debug UART physical address"
        depends on PPC_EARLY_DEBUG_44x
        default "0x1"
 

+config PPC_EARLY_DEBUG_40x_PHYSADDR
+       hex "Early debug UART physical address"
+       depends on PPC_EARLY_DEBUG_40x
+       default "0xef600300"
+

 config PPC_EARLY_DEBUG_CPM_ADDR
        hex "CPM UART early debug transmit descriptor address"
        depends on PPC_EARLY_DEBUG_CPM
        default "0xfa202008" if PPC_EP88XC
 config PPC_EARLY_DEBUG_CPM_ADDR
        hex "CPM UART early debug transmit descriptor address"
        depends on PPC_EARLY_DEBUG_CPM
        default "0xfa202008" if PPC_EP88XC

-       default "0xf0000008" if CPM2
+       default "0xf0001ff8" if CPM2

        default "0xff002008" if CPM1
        help
          This specifies the address of the transmit descriptor
        default "0xff002008" if CPM1
        help
          This specifies the address of the transmit descriptor