486, 586, Pentiums, and various instruction-set-compatible chips by
AMD, Cyrix, and others.
+config GENERIC_TIME
+ bool
+ default y
+
+config LOCKDEP_SUPPORT
+ bool
+ default y
+
+config STACKTRACE_SUPPORT
+ bool
+ default y
+
config SEMAPHORE_SLEEPERS
bool
default y
menu "Processor type and features"
+config SMP
+ bool "Symmetric multi-processing support"
+ ---help---
+ This enables support for systems with more than one CPU. If you have
+ a system with only one CPU, like most personal computers, say N. If
+ you have a system with more than one CPU, say Y.
+
+ If you say N here, the kernel will run on single and multiprocessor
+ machines, but will use only one CPU of a multiprocessor machine. If
+ you say Y here, the kernel will run on many, but not all,
+ singleprocessor machines. On a singleprocessor machine, the kernel
+ will run faster if you say N here.
+
+ Note that if you say Y here and choose architecture "586" or
+ "Pentium" under "Processor family", the kernel will not work on 486
+ architectures. Similarly, multiprocessor kernels for the "PPro"
+ architecture may not work on all Pentium based boards.
+
+ People using multiprocessor machines who say Y here should also say
+ Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
+ Management" code will be disabled if you say Y here.
+
+ See also the <file:Documentation/smp.txt>,
+ <file:Documentation/i386/IO-APIC.txt>,
+ <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
+ <http://www.tldp.org/docs.html#howto>.
+
+ If you don't know what to do here, say N.
+
choice
prompt "Subarchitecture Type"
default X86_PC
In particular, it is needed for the x440.
If you don't have one of these computers, you should say N here.
+ If you want to build a NUMA kernel, you must select ACPI.
config X86_BIGSMP
bool "Support for other sub-arch SMP systems with more than 8 CPUs"
config X86_GENERICARCH
bool "Generic architecture (Summit, bigsmp, ES7000, default)"
- depends on SMP
help
This option compiles in the Summit, bigsmp, ES7000, default subarchitectures.
It is intended for a generic binary kernel.
+ If you want a NUMA kernel, select ACPI. We need SRAT for NUMA.
config X86_ES7000
bool "Support for Unisys ES7000 IA32 series"
config ACPI_SRAT
bool
default y
- depends on NUMA && (X86_SUMMIT || X86_GENERICARCH)
+ depends on ACPI && NUMA && (X86_SUMMIT || X86_GENERICARCH)
+ select ACPI_NUMA
+
+config HAVE_ARCH_PARSE_SRAT
+ bool
+ default y
+ depends on ACPI_SRAT
config X86_SUMMIT_NUMA
bool
depends on HPET_TIMER && RTC=y
default y
-config SMP
- bool "Symmetric multi-processing support"
- ---help---
- This enables support for systems with more than one CPU. If you have
- a system with only one CPU, like most personal computers, say N. If
- you have a system with more than one CPU, say Y.
-
- If you say N here, the kernel will run on single and multiprocessor
- machines, but will use only one CPU of a multiprocessor machine. If
- you say Y here, the kernel will run on many, but not all,
- singleprocessor machines. On a singleprocessor machine, the kernel
- will run faster if you say N here.
-
- Note that if you say Y here and choose architecture "586" or
- "Pentium" under "Processor family", the kernel will not work on 486
- architectures. Similarly, multiprocessor kernels for the "PPro"
- architecture may not work on all Pentium based boards.
-
- People using multiprocessor machines who say Y here should also say
- Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
- Management" code will be disabled if you say Y here.
-
- See also the <file:Documentation/smp.txt>,
- <file:Documentation/i386/IO-APIC.txt>,
- <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
- <http://www.tldp.org/docs.html#howto>.
-
- If you don't know what to do here, say N.
-
config NR_CPUS
int "Maximum number of CPUs (2-255)"
range 2 255
config SCHED_SMT
bool "SMT (Hyperthreading) scheduler support"
- depends on SMP
- default off
+ depends on X86_HT
help
SMT scheduler support improves the CPU scheduler's decision making
when dealing with Intel Pentium 4 chips with HyperThreading at a
cost of slightly increased overhead in some places. If unsure say
N here.
+config SCHED_MC
+ bool "Multi-core scheduler support"
+ depends on X86_HT
+ default y
+ help
+ Multi-core scheduler support improves the CPU scheduler's decision
+ making when dealing with multi-core CPU chips at a cost of slightly
+ increased overhead in some places. If unsure say N here.
+
source "kernel/Kconfig.preempt"
config X86_UP_APIC
bool "Local APIC support on uniprocessors"
- depends on !SMP && !(X86_VISWS || X86_VOYAGER)
+ depends on !SMP && !(X86_VISWS || X86_VOYAGER || X86_GENERICARCH)
help
A local APIC (Advanced Programmable Interrupt Controller) is an
integrated interrupt controller in the CPU. If you have a single-CPU
config X86_LOCAL_APIC
bool
- depends on X86_UP_APIC || ((X86_VISWS || SMP) && !X86_VOYAGER)
+ depends on X86_UP_APIC || ((X86_VISWS || SMP) && !X86_VOYAGER) || X86_GENERICARCH
default y
config X86_IO_APIC
bool
- depends on X86_UP_IOAPIC || (SMP && !(X86_VISWS || X86_VOYAGER))
+ depends on X86_UP_IOAPIC || (SMP && !(X86_VISWS || X86_VOYAGER)) || X86_GENERICARCH
default y
config X86_VISWS_APIC
Enabling this feature will cause a message to be printed when the P4
enters thermal throttling.
+config VM86
+ default y
+ bool "Enable VM86 support" if EMBEDDED
+ help
+ This option is required by programs like DOSEMU to run 16-bit legacy
+ code on X86 processors. It also may be needed by software like
+ XFree86 to initialize some video cards via BIOS. Disabling this
+ option saves about 6k.
+
config TOSHIBA
tristate "Toshiba Laptop support"
---help---
choice
depends on EXPERIMENTAL && !X86_PAE
- prompt "Memory split"
+ prompt "Memory split" if EMBEDDED
default VMSPLIT_3G
help
Select the desired split between kernel and user memory.
bool
depends on HIGHMEM64G
default y
+ select RESOURCES_64BIT
# Common NUMA Features
config NUMA
bool "Numa Memory Allocation and Scheduler Support"
- depends on SMP && HIGHMEM64G && (X86_NUMAQ || X86_GENERICARCH || (X86_SUMMIT && ACPI))
+ depends on SMP && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || X86_GENERICARCH) && ACPI)
default n if X86_PC
default y if (X86_NUMAQ || X86_SUMMIT)
comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
depends on X86_SUMMIT && (!HIGHMEM64G || !ACPI)
+config NODES_SHIFT
+ int
+ default "4" if X86_NUMAQ
+ default "3"
+ depends on NEED_MULTIPLE_NODES
+
config HAVE_ARCH_BOOTMEM_NODE
bool
depends on NUMA
See <file:Documentation/mtrr.txt> for more information.
config EFI
- bool "Boot from EFI support (EXPERIMENTAL)"
+ bool "Boot from EFI support"
depends on ACPI
default n
---help---
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
- but it is indepedent of the system firmware. And like a reboot
+ but it is independent of the system firmware. And like a reboot
you can start any kernel with it, not just Linux.
- The name comes from the similiarity to the exec system call.
+ The name comes from the similarity to the exec system call.
It is an ongoing process to be certain the hardware in a machine
is properly shutdown, so do not be surprised if this code does not
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
- depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER && !X86_PC
+ depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER
---help---
- Say Y here to experiment with turning CPUs off and on. CPUs
- can be controlled through /sys/devices/system/cpu.
+ Say Y here to experiment with turning CPUs off and on, and to
+ enable suspend on SMP systems. CPUs can be controlled through
+ /sys/devices/system/cpu.
- Say N.
-
-config DOUBLEFAULT
+config COMPAT_VDSO
+ bool "Compat VDSO support"
default y
- bool "Enable doublefault exception handler" if EMBEDDED
help
- This option allows trapping of rare doublefault exceptions that
- would otherwise cause a system to silently reboot. Disabling this
- option saves about 4k and might cause you much additional grey
- hair.
+ Map the VDSO to the predictable old-style address too.
+ ---help---
+ Say N here if you are running a sufficiently recent glibc
+ version (2.3.3 or later), to remove the high-mapped
+ VDSO mapping and to exclusively use the randomized VDSO.
+
+ If unsure, say Y.
endmenu
+config ARCH_ENABLE_MEMORY_HOTPLUG
+ def_bool y
+ depends on HIGHMEM
menu "Power management options (ACPI, APM)"
depends on !X86_VOYAGER
tristate "NatSemi SCx200 support"
depends on !X86_VOYAGER
help
- This provides basic support for the National Semiconductor SCx200
- processor. Right now this is just a driver for the GPIO pins.
+ This provides basic support for National Semiconductor's
+ (now AMD's) Geode processors. The driver probes for the
+ PCI-IDs of several on-chip devices, so its a good dependency
+ for other scx200_* drivers.
- If you don't know what to do here, say N.
+ If compiled as a module, the driver is named scx200.
- This support is also available as a module. If compiled as a
- module, it will be called scx200.
+config SCx200HR_TIMER
+ tristate "NatSemi SCx200 27MHz High-Resolution Timer Support"
+ depends on SCx200 && GENERIC_TIME
+ default y
+ help
+ This driver provides a clocksource built upon the on-chip
+ 27MHz high-resolution timer. Its also a workaround for
+ NSC Geode SC-1100's buggy TSC, which loses time when the
+ processor goes idle (as is done by the scheduler). The
+ other workaround is idle=poll boot option.
+
+config K8_NB
+ def_bool y
+ depends on AGP_AMD64
source "drivers/pcmcia/Kconfig"