mac80211: remove unused declaration of struct sta_attribute.
[safe/jmp/linux-2.6] / net / mac80211 / tx.c
1 /*
2  * Copyright 2002-2005, Instant802 Networks, Inc.
3  * Copyright 2005-2006, Devicescape Software, Inc.
4  * Copyright 2006-2007  Jiri Benc <jbenc@suse.cz>
5  * Copyright 2007       Johannes Berg <johannes@sipsolutions.net>
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License version 2 as
9  * published by the Free Software Foundation.
10  *
11  *
12  * Transmit and frame generation functions.
13  */
14
15 #include <linux/kernel.h>
16 #include <linux/slab.h>
17 #include <linux/skbuff.h>
18 #include <linux/etherdevice.h>
19 #include <linux/bitmap.h>
20 #include <linux/rcupdate.h>
21 #include <net/net_namespace.h>
22 #include <net/ieee80211_radiotap.h>
23 #include <net/cfg80211.h>
24 #include <net/mac80211.h>
25 #include <asm/unaligned.h>
26
27 #include "ieee80211_i.h"
28 #include "led.h"
29 #include "mesh.h"
30 #include "wep.h"
31 #include "wpa.h"
32 #include "wme.h"
33 #include "rate.h"
34
35 #define IEEE80211_TX_OK         0
36 #define IEEE80211_TX_AGAIN      1
37 #define IEEE80211_TX_FRAG_AGAIN 2
38
39 /* misc utils */
40
41 static __le16 ieee80211_duration(struct ieee80211_tx_data *tx, int group_addr,
42                                  int next_frag_len)
43 {
44         int rate, mrate, erp, dur, i;
45         struct ieee80211_rate *txrate;
46         struct ieee80211_local *local = tx->local;
47         struct ieee80211_supported_band *sband;
48         struct ieee80211_hdr *hdr;
49
50         sband = local->hw.wiphy->bands[tx->channel->band];
51         txrate = &sband->bitrates[tx->rate_idx];
52
53         erp = 0;
54         if (tx->sdata->flags & IEEE80211_SDATA_OPERATING_GMODE)
55                 erp = txrate->flags & IEEE80211_RATE_ERP_G;
56
57         /*
58          * data and mgmt (except PS Poll):
59          * - during CFP: 32768
60          * - during contention period:
61          *   if addr1 is group address: 0
62          *   if more fragments = 0 and addr1 is individual address: time to
63          *      transmit one ACK plus SIFS
64          *   if more fragments = 1 and addr1 is individual address: time to
65          *      transmit next fragment plus 2 x ACK plus 3 x SIFS
66          *
67          * IEEE 802.11, 9.6:
68          * - control response frame (CTS or ACK) shall be transmitted using the
69          *   same rate as the immediately previous frame in the frame exchange
70          *   sequence, if this rate belongs to the PHY mandatory rates, or else
71          *   at the highest possible rate belonging to the PHY rates in the
72          *   BSSBasicRateSet
73          */
74         hdr = (struct ieee80211_hdr *)tx->skb->data;
75         if (ieee80211_is_ctl(hdr->frame_control)) {
76                 /* TODO: These control frames are not currently sent by
77                  * mac80211, but should they be implemented, this function
78                  * needs to be updated to support duration field calculation.
79                  *
80                  * RTS: time needed to transmit pending data/mgmt frame plus
81                  *    one CTS frame plus one ACK frame plus 3 x SIFS
82                  * CTS: duration of immediately previous RTS minus time
83                  *    required to transmit CTS and its SIFS
84                  * ACK: 0 if immediately previous directed data/mgmt had
85                  *    more=0, with more=1 duration in ACK frame is duration
86                  *    from previous frame minus time needed to transmit ACK
87                  *    and its SIFS
88                  * PS Poll: BIT(15) | BIT(14) | aid
89                  */
90                 return 0;
91         }
92
93         /* data/mgmt */
94         if (0 /* FIX: data/mgmt during CFP */)
95                 return cpu_to_le16(32768);
96
97         if (group_addr) /* Group address as the destination - no ACK */
98                 return 0;
99
100         /* Individual destination address:
101          * IEEE 802.11, Ch. 9.6 (after IEEE 802.11g changes)
102          * CTS and ACK frames shall be transmitted using the highest rate in
103          * basic rate set that is less than or equal to the rate of the
104          * immediately previous frame and that is using the same modulation
105          * (CCK or OFDM). If no basic rate set matches with these requirements,
106          * the highest mandatory rate of the PHY that is less than or equal to
107          * the rate of the previous frame is used.
108          * Mandatory rates for IEEE 802.11g PHY: 1, 2, 5.5, 11, 6, 12, 24 Mbps
109          */
110         rate = -1;
111         /* use lowest available if everything fails */
112         mrate = sband->bitrates[0].bitrate;
113         for (i = 0; i < sband->n_bitrates; i++) {
114                 struct ieee80211_rate *r = &sband->bitrates[i];
115
116                 if (r->bitrate > txrate->bitrate)
117                         break;
118
119                 if (tx->sdata->bss_conf.basic_rates & BIT(i))
120                         rate = r->bitrate;
121
122                 switch (sband->band) {
123                 case IEEE80211_BAND_2GHZ: {
124                         u32 flag;
125                         if (tx->sdata->flags & IEEE80211_SDATA_OPERATING_GMODE)
126                                 flag = IEEE80211_RATE_MANDATORY_G;
127                         else
128                                 flag = IEEE80211_RATE_MANDATORY_B;
129                         if (r->flags & flag)
130                                 mrate = r->bitrate;
131                         break;
132                 }
133                 case IEEE80211_BAND_5GHZ:
134                         if (r->flags & IEEE80211_RATE_MANDATORY_A)
135                                 mrate = r->bitrate;
136                         break;
137                 case IEEE80211_NUM_BANDS:
138                         WARN_ON(1);
139                         break;
140                 }
141         }
142         if (rate == -1) {
143                 /* No matching basic rate found; use highest suitable mandatory
144                  * PHY rate */
145                 rate = mrate;
146         }
147
148         /* Time needed to transmit ACK
149          * (10 bytes + 4-byte FCS = 112 bits) plus SIFS; rounded up
150          * to closest integer */
151
152         dur = ieee80211_frame_duration(local, 10, rate, erp,
153                                 tx->sdata->bss_conf.use_short_preamble);
154
155         if (next_frag_len) {
156                 /* Frame is fragmented: duration increases with time needed to
157                  * transmit next fragment plus ACK and 2 x SIFS. */
158                 dur *= 2; /* ACK + SIFS */
159                 /* next fragment */
160                 dur += ieee80211_frame_duration(local, next_frag_len,
161                                 txrate->bitrate, erp,
162                                 tx->sdata->bss_conf.use_short_preamble);
163         }
164
165         return cpu_to_le16(dur);
166 }
167
168 static int inline is_ieee80211_device(struct ieee80211_local *local,
169                                       struct net_device *dev)
170 {
171         return local == wdev_priv(dev->ieee80211_ptr);
172 }
173
174 /* tx handlers */
175
176 static ieee80211_tx_result debug_noinline
177 ieee80211_tx_h_check_assoc(struct ieee80211_tx_data *tx)
178 {
179
180         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
181         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
182         u32 sta_flags;
183
184         if (unlikely(info->flags & IEEE80211_TX_CTL_INJECTED))
185                 return TX_CONTINUE;
186
187         if (unlikely(tx->local->sw_scanning) &&
188             !ieee80211_is_probe_req(hdr->frame_control))
189                 return TX_DROP;
190
191         if (tx->sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
192                 return TX_CONTINUE;
193
194         if (tx->flags & IEEE80211_TX_PS_BUFFERED)
195                 return TX_CONTINUE;
196
197         sta_flags = tx->sta ? get_sta_flags(tx->sta) : 0;
198
199         if (likely(tx->flags & IEEE80211_TX_UNICAST)) {
200                 if (unlikely(!(sta_flags & WLAN_STA_ASSOC) &&
201                              tx->sdata->vif.type != NL80211_IFTYPE_ADHOC &&
202                              ieee80211_is_data(hdr->frame_control))) {
203 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
204                         printk(KERN_DEBUG "%s: dropped data frame to not "
205                                "associated station %pM\n",
206                                tx->dev->name, hdr->addr1);
207 #endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
208                         I802_DEBUG_INC(tx->local->tx_handlers_drop_not_assoc);
209                         return TX_DROP;
210                 }
211         } else {
212                 if (unlikely(ieee80211_is_data(hdr->frame_control) &&
213                              tx->local->num_sta == 0 &&
214                              tx->sdata->vif.type != NL80211_IFTYPE_ADHOC)) {
215                         /*
216                          * No associated STAs - no need to send multicast
217                          * frames.
218                          */
219                         return TX_DROP;
220                 }
221                 return TX_CONTINUE;
222         }
223
224         return TX_CONTINUE;
225 }
226
227 /* This function is called whenever the AP is about to exceed the maximum limit
228  * of buffered frames for power saving STAs. This situation should not really
229  * happen often during normal operation, so dropping the oldest buffered packet
230  * from each queue should be OK to make some room for new frames. */
231 static void purge_old_ps_buffers(struct ieee80211_local *local)
232 {
233         int total = 0, purged = 0;
234         struct sk_buff *skb;
235         struct ieee80211_sub_if_data *sdata;
236         struct sta_info *sta;
237
238         /*
239          * virtual interfaces are protected by RCU
240          */
241         rcu_read_lock();
242
243         list_for_each_entry_rcu(sdata, &local->interfaces, list) {
244                 struct ieee80211_if_ap *ap;
245                 if (sdata->vif.type != NL80211_IFTYPE_AP)
246                         continue;
247                 ap = &sdata->u.ap;
248                 skb = skb_dequeue(&ap->ps_bc_buf);
249                 if (skb) {
250                         purged++;
251                         dev_kfree_skb(skb);
252                 }
253                 total += skb_queue_len(&ap->ps_bc_buf);
254         }
255
256         list_for_each_entry_rcu(sta, &local->sta_list, list) {
257                 skb = skb_dequeue(&sta->ps_tx_buf);
258                 if (skb) {
259                         purged++;
260                         dev_kfree_skb(skb);
261                 }
262                 total += skb_queue_len(&sta->ps_tx_buf);
263         }
264
265         rcu_read_unlock();
266
267         local->total_ps_buffered = total;
268 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
269         printk(KERN_DEBUG "%s: PS buffers full - purged %d frames\n",
270                wiphy_name(local->hw.wiphy), purged);
271 #endif
272 }
273
274 static ieee80211_tx_result
275 ieee80211_tx_h_multicast_ps_buf(struct ieee80211_tx_data *tx)
276 {
277         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
278         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
279
280         /*
281          * broadcast/multicast frame
282          *
283          * If any of the associated stations is in power save mode,
284          * the frame is buffered to be sent after DTIM beacon frame.
285          * This is done either by the hardware or us.
286          */
287
288         /* powersaving STAs only in AP/VLAN mode */
289         if (!tx->sdata->bss)
290                 return TX_CONTINUE;
291
292         /* no buffering for ordered frames */
293         if (ieee80211_has_order(hdr->frame_control))
294                 return TX_CONTINUE;
295
296         /* no stations in PS mode */
297         if (!atomic_read(&tx->sdata->bss->num_sta_ps))
298                 return TX_CONTINUE;
299
300         /* buffered in mac80211 */
301         if (tx->local->hw.flags & IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING) {
302                 if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER)
303                         purge_old_ps_buffers(tx->local);
304                 if (skb_queue_len(&tx->sdata->bss->ps_bc_buf) >=
305                     AP_MAX_BC_BUFFER) {
306 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
307                         if (net_ratelimit()) {
308                                 printk(KERN_DEBUG "%s: BC TX buffer full - "
309                                        "dropping the oldest frame\n",
310                                        tx->dev->name);
311                         }
312 #endif
313                         dev_kfree_skb(skb_dequeue(&tx->sdata->bss->ps_bc_buf));
314                 } else
315                         tx->local->total_ps_buffered++;
316                 skb_queue_tail(&tx->sdata->bss->ps_bc_buf, tx->skb);
317                 return TX_QUEUED;
318         }
319
320         /* buffered in hardware */
321         info->flags |= IEEE80211_TX_CTL_SEND_AFTER_DTIM;
322
323         return TX_CONTINUE;
324 }
325
326 static ieee80211_tx_result
327 ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx)
328 {
329         struct sta_info *sta = tx->sta;
330         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
331         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
332         u32 staflags;
333
334         if (unlikely(!sta || ieee80211_is_probe_resp(hdr->frame_control)))
335                 return TX_CONTINUE;
336
337         staflags = get_sta_flags(sta);
338
339         if (unlikely((staflags & WLAN_STA_PS) &&
340                      !(staflags & WLAN_STA_PSPOLL))) {
341 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
342                 printk(KERN_DEBUG "STA %pM aid %d: PS buffer (entries "
343                        "before %d)\n",
344                        sta->sta.addr, sta->sta.aid,
345                        skb_queue_len(&sta->ps_tx_buf));
346 #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
347                 if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER)
348                         purge_old_ps_buffers(tx->local);
349                 if (skb_queue_len(&sta->ps_tx_buf) >= STA_MAX_TX_BUFFER) {
350                         struct sk_buff *old = skb_dequeue(&sta->ps_tx_buf);
351 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
352                         if (net_ratelimit()) {
353                                 printk(KERN_DEBUG "%s: STA %pM TX "
354                                        "buffer full - dropping oldest frame\n",
355                                        tx->dev->name, sta->sta.addr);
356                         }
357 #endif
358                         dev_kfree_skb(old);
359                 } else
360                         tx->local->total_ps_buffered++;
361
362                 /* Queue frame to be sent after STA sends an PS Poll frame */
363                 if (skb_queue_empty(&sta->ps_tx_buf))
364                         sta_info_set_tim_bit(sta);
365
366                 info->control.jiffies = jiffies;
367                 skb_queue_tail(&sta->ps_tx_buf, tx->skb);
368                 return TX_QUEUED;
369         }
370 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
371         else if (unlikely(test_sta_flags(sta, WLAN_STA_PS))) {
372                 printk(KERN_DEBUG "%s: STA %pM in PS mode, but pspoll "
373                        "set -> send frame\n", tx->dev->name,
374                        sta->sta.addr);
375         }
376 #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
377         clear_sta_flags(sta, WLAN_STA_PSPOLL);
378
379         return TX_CONTINUE;
380 }
381
382 static ieee80211_tx_result debug_noinline
383 ieee80211_tx_h_ps_buf(struct ieee80211_tx_data *tx)
384 {
385         if (unlikely(tx->flags & IEEE80211_TX_PS_BUFFERED))
386                 return TX_CONTINUE;
387
388         if (tx->flags & IEEE80211_TX_UNICAST)
389                 return ieee80211_tx_h_unicast_ps_buf(tx);
390         else
391                 return ieee80211_tx_h_multicast_ps_buf(tx);
392 }
393
394 static ieee80211_tx_result debug_noinline
395 ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx)
396 {
397         struct ieee80211_key *key;
398         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
399         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
400
401         if (unlikely(tx->skb->do_not_encrypt))
402                 tx->key = NULL;
403         else if (tx->sta && (key = rcu_dereference(tx->sta->key)))
404                 tx->key = key;
405         else if ((key = rcu_dereference(tx->sdata->default_key)))
406                 tx->key = key;
407         else if (tx->sdata->drop_unencrypted &&
408                  (tx->skb->protocol != cpu_to_be16(ETH_P_PAE)) &&
409                  !(info->flags & IEEE80211_TX_CTL_INJECTED)) {
410                 I802_DEBUG_INC(tx->local->tx_handlers_drop_unencrypted);
411                 return TX_DROP;
412         } else
413                 tx->key = NULL;
414
415         if (tx->key) {
416                 tx->key->tx_rx_count++;
417                 /* TODO: add threshold stuff again */
418
419                 switch (tx->key->conf.alg) {
420                 case ALG_WEP:
421                         if (ieee80211_is_auth(hdr->frame_control))
422                                 break;
423                 case ALG_TKIP:
424                 case ALG_CCMP:
425                         if (!ieee80211_is_data_present(hdr->frame_control))
426                                 tx->key = NULL;
427                         break;
428                 }
429         }
430
431         if (!tx->key || !(tx->key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE))
432                 tx->skb->do_not_encrypt = 1;
433
434         return TX_CONTINUE;
435 }
436
437 static ieee80211_tx_result debug_noinline
438 ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx)
439 {
440         struct rate_selection rsel;
441         struct ieee80211_supported_band *sband;
442         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
443
444         sband = tx->local->hw.wiphy->bands[tx->channel->band];
445
446         if (likely(tx->rate_idx < 0)) {
447                 rate_control_get_rate(tx->sdata, sband, tx->sta,
448                                       tx->skb, &rsel);
449                 if (tx->sta)
450                         tx->sta->last_txrate_idx = rsel.rate_idx;
451                 tx->rate_idx = rsel.rate_idx;
452                 if (unlikely(rsel.probe_idx >= 0)) {
453                         info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE;
454                         tx->flags |= IEEE80211_TX_PROBE_LAST_FRAG;
455                         info->control.retries[0].rate_idx = tx->rate_idx;
456                         info->control.retries[0].limit = tx->local->hw.max_altrate_tries;
457                         tx->rate_idx = rsel.probe_idx;
458                 } else if (info->control.retries[0].limit == 0)
459                         info->control.retries[0].rate_idx = -1;
460
461                 if (unlikely(tx->rate_idx < 0))
462                         return TX_DROP;
463         } else
464                 info->control.retries[0].rate_idx = -1;
465
466         if (tx->sdata->bss_conf.use_cts_prot &&
467             (tx->flags & IEEE80211_TX_FRAGMENTED) && (rsel.nonerp_idx >= 0)) {
468                 tx->last_frag_rate_idx = tx->rate_idx;
469                 if (rsel.probe_idx >= 0)
470                         tx->flags &= ~IEEE80211_TX_PROBE_LAST_FRAG;
471                 else
472                         tx->flags |= IEEE80211_TX_PROBE_LAST_FRAG;
473                 tx->rate_idx = rsel.nonerp_idx;
474                 info->tx_rate_idx = rsel.nonerp_idx;
475                 info->flags &= ~IEEE80211_TX_CTL_RATE_CTRL_PROBE;
476         } else {
477                 tx->last_frag_rate_idx = tx->rate_idx;
478                 info->tx_rate_idx = tx->rate_idx;
479         }
480         info->tx_rate_idx = tx->rate_idx;
481
482         return TX_CONTINUE;
483 }
484
485 static ieee80211_tx_result debug_noinline
486 ieee80211_tx_h_misc(struct ieee80211_tx_data *tx)
487 {
488         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
489         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
490         struct ieee80211_supported_band *sband;
491
492         sband = tx->local->hw.wiphy->bands[tx->channel->band];
493
494         if (tx->sta)
495                 info->control.sta = &tx->sta->sta;
496
497         if (!info->control.retry_limit) {
498                 if (!is_multicast_ether_addr(hdr->addr1)) {
499                         int len = min_t(int, tx->skb->len + FCS_LEN,
500                                         tx->local->fragmentation_threshold);
501                         if (len > tx->local->rts_threshold
502                             && tx->local->rts_threshold <
503                                                 IEEE80211_MAX_RTS_THRESHOLD) {
504                                 info->flags |= IEEE80211_TX_CTL_USE_RTS_CTS;
505                                 info->flags |=
506                                         IEEE80211_TX_CTL_LONG_RETRY_LIMIT;
507                                 info->control.retry_limit =
508                                         tx->local->long_retry_limit;
509                         } else {
510                                 info->control.retry_limit =
511                                         tx->local->short_retry_limit;
512                         }
513                 } else {
514                         info->control.retry_limit = 1;
515                 }
516         }
517
518         if (tx->flags & IEEE80211_TX_FRAGMENTED) {
519                 /* Do not use multiple retry rates when sending fragmented
520                  * frames.
521                  * TODO: The last fragment could still use multiple retry
522                  * rates. */
523                 info->control.retries[0].rate_idx = -1;
524         }
525
526         /* Use CTS protection for unicast frames sent using extended rates if
527          * there are associated non-ERP stations and RTS/CTS is not configured
528          * for the frame. */
529         if ((tx->sdata->flags & IEEE80211_SDATA_OPERATING_GMODE) &&
530             (sband->bitrates[tx->rate_idx].flags & IEEE80211_RATE_ERP_G) &&
531             (tx->flags & IEEE80211_TX_UNICAST) &&
532             tx->sdata->bss_conf.use_cts_prot &&
533             !(info->flags & IEEE80211_TX_CTL_USE_RTS_CTS))
534                 info->flags |= IEEE80211_TX_CTL_USE_CTS_PROTECT;
535
536         /* Transmit data frames using short preambles if the driver supports
537          * short preambles at the selected rate and short preambles are
538          * available on the network at the current point in time. */
539         if (ieee80211_is_data(hdr->frame_control) &&
540             (sband->bitrates[tx->rate_idx].flags & IEEE80211_RATE_SHORT_PREAMBLE) &&
541             tx->sdata->bss_conf.use_short_preamble &&
542             (!tx->sta || test_sta_flags(tx->sta, WLAN_STA_SHORT_PREAMBLE))) {
543                 info->flags |= IEEE80211_TX_CTL_SHORT_PREAMBLE;
544         }
545
546         if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) ||
547             (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)) {
548                 struct ieee80211_rate *rate;
549                 s8 baserate = -1;
550                 int idx;
551
552                 /* Do not use multiple retry rates when using RTS/CTS */
553                 info->control.retries[0].rate_idx = -1;
554
555                 /* Use min(data rate, max base rate) as CTS/RTS rate */
556                 rate = &sband->bitrates[tx->rate_idx];
557
558                 for (idx = 0; idx < sband->n_bitrates; idx++) {
559                         if (sband->bitrates[idx].bitrate > rate->bitrate)
560                                 continue;
561                         if (tx->sdata->bss_conf.basic_rates & BIT(idx) &&
562                             (baserate < 0 ||
563                              (sband->bitrates[baserate].bitrate
564                               < sband->bitrates[idx].bitrate)))
565                                 baserate = idx;
566                 }
567
568                 if (baserate >= 0)
569                         info->control.rts_cts_rate_idx = baserate;
570                 else
571                         info->control.rts_cts_rate_idx = 0;
572         }
573
574         if (tx->sta)
575                 info->control.sta = &tx->sta->sta;
576
577         return TX_CONTINUE;
578 }
579
580 static ieee80211_tx_result debug_noinline
581 ieee80211_tx_h_sequence(struct ieee80211_tx_data *tx)
582 {
583         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb);
584         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
585         u16 *seq;
586         u8 *qc;
587         int tid;
588
589         /*
590          * Packet injection may want to control the sequence
591          * number, if we have no matching interface then we
592          * neither assign one ourselves nor ask the driver to.
593          */
594         if (unlikely(!info->control.vif))
595                 return TX_CONTINUE;
596
597         if (unlikely(ieee80211_is_ctl(hdr->frame_control)))
598                 return TX_CONTINUE;
599
600         if (ieee80211_hdrlen(hdr->frame_control) < 24)
601                 return TX_CONTINUE;
602
603         if (!ieee80211_is_data_qos(hdr->frame_control)) {
604                 info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ;
605                 return TX_CONTINUE;
606         }
607
608         /*
609          * This should be true for injected/management frames only, for
610          * management frames we have set the IEEE80211_TX_CTL_ASSIGN_SEQ
611          * above since they are not QoS-data frames.
612          */
613         if (!tx->sta)
614                 return TX_CONTINUE;
615
616         /* include per-STA, per-TID sequence counter */
617
618         qc = ieee80211_get_qos_ctl(hdr);
619         tid = *qc & IEEE80211_QOS_CTL_TID_MASK;
620         seq = &tx->sta->tid_seq[tid];
621
622         hdr->seq_ctrl = cpu_to_le16(*seq);
623
624         /* Increase the sequence number. */
625         *seq = (*seq + 0x10) & IEEE80211_SCTL_SEQ;
626
627         return TX_CONTINUE;
628 }
629
630 static ieee80211_tx_result debug_noinline
631 ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx)
632 {
633         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
634         size_t hdrlen, per_fragm, num_fragm, payload_len, left;
635         struct sk_buff **frags, *first, *frag;
636         int i;
637         u16 seq;
638         u8 *pos;
639         int frag_threshold = tx->local->fragmentation_threshold;
640
641         if (!(tx->flags & IEEE80211_TX_FRAGMENTED))
642                 return TX_CONTINUE;
643
644         /*
645          * Warn when submitting a fragmented A-MPDU frame and drop it.
646          * This scenario is handled in __ieee80211_tx_prepare but extra
647          * caution taken here as fragmented ampdu may cause Tx stop.
648          */
649         if (WARN_ON(tx->flags & IEEE80211_TX_CTL_AMPDU ||
650                     skb_get_queue_mapping(tx->skb) >=
651                         ieee80211_num_regular_queues(&tx->local->hw)))
652                 return TX_DROP;
653
654         first = tx->skb;
655
656         hdrlen = ieee80211_hdrlen(hdr->frame_control);
657         payload_len = first->len - hdrlen;
658         per_fragm = frag_threshold - hdrlen - FCS_LEN;
659         num_fragm = DIV_ROUND_UP(payload_len, per_fragm);
660
661         frags = kzalloc(num_fragm * sizeof(struct sk_buff *), GFP_ATOMIC);
662         if (!frags)
663                 goto fail;
664
665         hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREFRAGS);
666         seq = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ;
667         pos = first->data + hdrlen + per_fragm;
668         left = payload_len - per_fragm;
669         for (i = 0; i < num_fragm - 1; i++) {
670                 struct ieee80211_hdr *fhdr;
671                 size_t copylen;
672
673                 if (left <= 0)
674                         goto fail;
675
676                 /* reserve enough extra head and tail room for possible
677                  * encryption */
678                 frag = frags[i] =
679                         dev_alloc_skb(tx->local->tx_headroom +
680                                       frag_threshold +
681                                       IEEE80211_ENCRYPT_HEADROOM +
682                                       IEEE80211_ENCRYPT_TAILROOM);
683                 if (!frag)
684                         goto fail;
685                 /* Make sure that all fragments use the same priority so
686                  * that they end up using the same TX queue */
687                 frag->priority = first->priority;
688                 skb_reserve(frag, tx->local->tx_headroom +
689                                   IEEE80211_ENCRYPT_HEADROOM);
690                 fhdr = (struct ieee80211_hdr *) skb_put(frag, hdrlen);
691                 memcpy(fhdr, first->data, hdrlen);
692                 if (i == num_fragm - 2)
693                         fhdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_MOREFRAGS);
694                 fhdr->seq_ctrl = cpu_to_le16(seq | ((i + 1) & IEEE80211_SCTL_FRAG));
695                 copylen = left > per_fragm ? per_fragm : left;
696                 memcpy(skb_put(frag, copylen), pos, copylen);
697                 memcpy(frag->cb, first->cb, sizeof(frag->cb));
698                 skb_copy_queue_mapping(frag, first);
699                 frag->do_not_encrypt = first->do_not_encrypt;
700
701                 pos += copylen;
702                 left -= copylen;
703         }
704         skb_trim(first, hdrlen + per_fragm);
705
706         tx->num_extra_frag = num_fragm - 1;
707         tx->extra_frag = frags;
708
709         return TX_CONTINUE;
710
711  fail:
712         if (frags) {
713                 for (i = 0; i < num_fragm - 1; i++)
714                         if (frags[i])
715                                 dev_kfree_skb(frags[i]);
716                 kfree(frags);
717         }
718         I802_DEBUG_INC(tx->local->tx_handlers_drop_fragment);
719         return TX_DROP;
720 }
721
722 static ieee80211_tx_result debug_noinline
723 ieee80211_tx_h_encrypt(struct ieee80211_tx_data *tx)
724 {
725         if (!tx->key)
726                 return TX_CONTINUE;
727
728         switch (tx->key->conf.alg) {
729         case ALG_WEP:
730                 return ieee80211_crypto_wep_encrypt(tx);
731         case ALG_TKIP:
732                 return ieee80211_crypto_tkip_encrypt(tx);
733         case ALG_CCMP:
734                 return ieee80211_crypto_ccmp_encrypt(tx);
735         }
736
737         /* not reached */
738         WARN_ON(1);
739         return TX_DROP;
740 }
741
742 static ieee80211_tx_result debug_noinline
743 ieee80211_tx_h_calculate_duration(struct ieee80211_tx_data *tx)
744 {
745         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
746         int next_len, i;
747         int group_addr = is_multicast_ether_addr(hdr->addr1);
748
749         if (!(tx->flags & IEEE80211_TX_FRAGMENTED)) {
750                 hdr->duration_id = ieee80211_duration(tx, group_addr, 0);
751                 return TX_CONTINUE;
752         }
753
754         hdr->duration_id = ieee80211_duration(tx, group_addr,
755                                               tx->extra_frag[0]->len);
756
757         for (i = 0; i < tx->num_extra_frag; i++) {
758                 if (i + 1 < tx->num_extra_frag) {
759                         next_len = tx->extra_frag[i + 1]->len;
760                 } else {
761                         next_len = 0;
762                         tx->rate_idx = tx->last_frag_rate_idx;
763                 }
764
765                 hdr = (struct ieee80211_hdr *)tx->extra_frag[i]->data;
766                 hdr->duration_id = ieee80211_duration(tx, 0, next_len);
767         }
768
769         return TX_CONTINUE;
770 }
771
772 static ieee80211_tx_result debug_noinline
773 ieee80211_tx_h_stats(struct ieee80211_tx_data *tx)
774 {
775         int i;
776
777         if (!tx->sta)
778                 return TX_CONTINUE;
779
780         tx->sta->tx_packets++;
781         tx->sta->tx_fragments++;
782         tx->sta->tx_bytes += tx->skb->len;
783         if (tx->extra_frag) {
784                 tx->sta->tx_fragments += tx->num_extra_frag;
785                 for (i = 0; i < tx->num_extra_frag; i++)
786                         tx->sta->tx_bytes += tx->extra_frag[i]->len;
787         }
788
789         return TX_CONTINUE;
790 }
791
792
793 /* actual transmit path */
794
795 /*
796  * deal with packet injection down monitor interface
797  * with Radiotap Header -- only called for monitor mode interface
798  */
799 static ieee80211_tx_result
800 __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx,
801                               struct sk_buff *skb)
802 {
803         /*
804          * this is the moment to interpret and discard the radiotap header that
805          * must be at the start of the packet injected in Monitor mode
806          *
807          * Need to take some care with endian-ness since radiotap
808          * args are little-endian
809          */
810
811         struct ieee80211_radiotap_iterator iterator;
812         struct ieee80211_radiotap_header *rthdr =
813                 (struct ieee80211_radiotap_header *) skb->data;
814         struct ieee80211_supported_band *sband;
815         int ret = ieee80211_radiotap_iterator_init(&iterator, rthdr, skb->len);
816         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
817
818         sband = tx->local->hw.wiphy->bands[tx->channel->band];
819
820         skb->do_not_encrypt = 1;
821         tx->flags &= ~IEEE80211_TX_FRAGMENTED;
822
823         /*
824          * for every radiotap entry that is present
825          * (ieee80211_radiotap_iterator_next returns -ENOENT when no more
826          * entries present, or -EINVAL on error)
827          */
828
829         while (!ret) {
830                 int i, target_rate;
831
832                 ret = ieee80211_radiotap_iterator_next(&iterator);
833
834                 if (ret)
835                         continue;
836
837                 /* see if this argument is something we can use */
838                 switch (iterator.this_arg_index) {
839                 /*
840                  * You must take care when dereferencing iterator.this_arg
841                  * for multibyte types... the pointer is not aligned.  Use
842                  * get_unaligned((type *)iterator.this_arg) to dereference
843                  * iterator.this_arg for type "type" safely on all arches.
844                 */
845                 case IEEE80211_RADIOTAP_RATE:
846                         /*
847                          * radiotap rate u8 is in 500kbps units eg, 0x02=1Mbps
848                          * ieee80211 rate int is in 100kbps units eg, 0x0a=1Mbps
849                          */
850                         target_rate = (*iterator.this_arg) * 5;
851                         for (i = 0; i < sband->n_bitrates; i++) {
852                                 struct ieee80211_rate *r;
853
854                                 r = &sband->bitrates[i];
855
856                                 if (r->bitrate == target_rate) {
857                                         tx->rate_idx = i;
858                                         break;
859                                 }
860                         }
861                         break;
862
863                 case IEEE80211_RADIOTAP_ANTENNA:
864                         /*
865                          * radiotap uses 0 for 1st ant, mac80211 is 1 for
866                          * 1st ant
867                          */
868                         info->antenna_sel_tx = (*iterator.this_arg) + 1;
869                         break;
870
871 #if 0
872                 case IEEE80211_RADIOTAP_DBM_TX_POWER:
873                         control->power_level = *iterator.this_arg;
874                         break;
875 #endif
876
877                 case IEEE80211_RADIOTAP_FLAGS:
878                         if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FCS) {
879                                 /*
880                                  * this indicates that the skb we have been
881                                  * handed has the 32-bit FCS CRC at the end...
882                                  * we should react to that by snipping it off
883                                  * because it will be recomputed and added
884                                  * on transmission
885                                  */
886                                 if (skb->len < (iterator.max_length + FCS_LEN))
887                                         return TX_DROP;
888
889                                 skb_trim(skb, skb->len - FCS_LEN);
890                         }
891                         if (*iterator.this_arg & IEEE80211_RADIOTAP_F_WEP)
892                                 tx->skb->do_not_encrypt = 0;
893                         if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FRAG)
894                                 tx->flags |= IEEE80211_TX_FRAGMENTED;
895                         break;
896
897                 /*
898                  * Please update the file
899                  * Documentation/networking/mac80211-injection.txt
900                  * when parsing new fields here.
901                  */
902
903                 default:
904                         break;
905                 }
906         }
907
908         if (ret != -ENOENT) /* ie, if we didn't simply run out of fields */
909                 return TX_DROP;
910
911         /*
912          * remove the radiotap header
913          * iterator->max_length was sanity-checked against
914          * skb->len by iterator init
915          */
916         skb_pull(skb, iterator.max_length);
917
918         return TX_CONTINUE;
919 }
920
921 /*
922  * initialises @tx
923  */
924 static ieee80211_tx_result
925 __ieee80211_tx_prepare(struct ieee80211_tx_data *tx,
926                        struct sk_buff *skb,
927                        struct net_device *dev)
928 {
929         struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
930         struct ieee80211_hdr *hdr;
931         struct ieee80211_sub_if_data *sdata;
932         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
933
934         int hdrlen;
935
936         memset(tx, 0, sizeof(*tx));
937         tx->skb = skb;
938         tx->dev = dev; /* use original interface */
939         tx->local = local;
940         tx->sdata = IEEE80211_DEV_TO_SUB_IF(dev);
941         tx->channel = local->hw.conf.channel;
942         tx->rate_idx = -1;
943         tx->last_frag_rate_idx = -1;
944         /*
945          * Set this flag (used below to indicate "automatic fragmentation"),
946          * it will be cleared/left by radiotap as desired.
947          */
948         tx->flags |= IEEE80211_TX_FRAGMENTED;
949
950         /* process and remove the injection radiotap header */
951         sdata = IEEE80211_DEV_TO_SUB_IF(dev);
952         if (unlikely(info->flags & IEEE80211_TX_CTL_INJECTED)) {
953                 if (__ieee80211_parse_tx_radiotap(tx, skb) == TX_DROP)
954                         return TX_DROP;
955
956                 /*
957                  * __ieee80211_parse_tx_radiotap has now removed
958                  * the radiotap header that was present and pre-filled
959                  * 'tx' with tx control information.
960                  */
961         }
962
963         hdr = (struct ieee80211_hdr *) skb->data;
964
965         tx->sta = sta_info_get(local, hdr->addr1);
966
967         if (is_multicast_ether_addr(hdr->addr1)) {
968                 tx->flags &= ~IEEE80211_TX_UNICAST;
969                 info->flags |= IEEE80211_TX_CTL_NO_ACK;
970         } else {
971                 tx->flags |= IEEE80211_TX_UNICAST;
972                 info->flags &= ~IEEE80211_TX_CTL_NO_ACK;
973         }
974
975         if (tx->flags & IEEE80211_TX_FRAGMENTED) {
976                 if ((tx->flags & IEEE80211_TX_UNICAST) &&
977                     skb->len + FCS_LEN > local->fragmentation_threshold &&
978                     !local->ops->set_frag_threshold &&
979                     !(info->flags & IEEE80211_TX_CTL_AMPDU))
980                         tx->flags |= IEEE80211_TX_FRAGMENTED;
981                 else
982                         tx->flags &= ~IEEE80211_TX_FRAGMENTED;
983         }
984
985         if (!tx->sta)
986                 info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
987         else if (test_and_clear_sta_flags(tx->sta, WLAN_STA_CLEAR_PS_FILT))
988                 info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
989
990         hdrlen = ieee80211_hdrlen(hdr->frame_control);
991         if (skb->len > hdrlen + sizeof(rfc1042_header) + 2) {
992                 u8 *pos = &skb->data[hdrlen + sizeof(rfc1042_header)];
993                 tx->ethertype = (pos[0] << 8) | pos[1];
994         }
995         info->flags |= IEEE80211_TX_CTL_FIRST_FRAGMENT;
996
997         return TX_CONTINUE;
998 }
999
1000 /*
1001  * NB: @tx is uninitialised when passed in here
1002  */
1003 static int ieee80211_tx_prepare(struct ieee80211_local *local,
1004                                 struct ieee80211_tx_data *tx,
1005                                 struct sk_buff *skb)
1006 {
1007         struct net_device *dev;
1008
1009         dev = dev_get_by_index(&init_net, skb->iif);
1010         if (unlikely(dev && !is_ieee80211_device(local, dev))) {
1011                 dev_put(dev);
1012                 dev = NULL;
1013         }
1014         if (unlikely(!dev))
1015                 return -ENODEV;
1016         /* initialises tx with control */
1017         __ieee80211_tx_prepare(tx, skb, dev);
1018         dev_put(dev);
1019         return 0;
1020 }
1021
1022 static int __ieee80211_tx(struct ieee80211_local *local, struct sk_buff *skb,
1023                           struct ieee80211_tx_data *tx)
1024 {
1025         struct ieee80211_tx_info *info;
1026         int ret, i;
1027
1028         if (skb) {
1029                 if (netif_subqueue_stopped(local->mdev, skb))
1030                         return IEEE80211_TX_AGAIN;
1031                 info =  IEEE80211_SKB_CB(skb);
1032
1033                 ret = local->ops->tx(local_to_hw(local), skb);
1034                 if (ret)
1035                         return IEEE80211_TX_AGAIN;
1036                 local->mdev->trans_start = jiffies;
1037                 ieee80211_led_tx(local, 1);
1038         }
1039         if (tx->extra_frag) {
1040                 for (i = 0; i < tx->num_extra_frag; i++) {
1041                         if (!tx->extra_frag[i])
1042                                 continue;
1043                         info = IEEE80211_SKB_CB(tx->extra_frag[i]);
1044                         info->flags &= ~(IEEE80211_TX_CTL_USE_RTS_CTS |
1045                                          IEEE80211_TX_CTL_USE_CTS_PROTECT |
1046                                          IEEE80211_TX_CTL_CLEAR_PS_FILT |
1047                                          IEEE80211_TX_CTL_FIRST_FRAGMENT);
1048                         if (netif_subqueue_stopped(local->mdev,
1049                                                    tx->extra_frag[i]))
1050                                 return IEEE80211_TX_FRAG_AGAIN;
1051                         if (i == tx->num_extra_frag) {
1052                                 info->tx_rate_idx = tx->last_frag_rate_idx;
1053
1054                                 if (tx->flags & IEEE80211_TX_PROBE_LAST_FRAG)
1055                                         info->flags |=
1056                                                 IEEE80211_TX_CTL_RATE_CTRL_PROBE;
1057                                 else
1058                                         info->flags &=
1059                                                 ~IEEE80211_TX_CTL_RATE_CTRL_PROBE;
1060                         }
1061
1062                         ret = local->ops->tx(local_to_hw(local),
1063                                             tx->extra_frag[i]);
1064                         if (ret)
1065                                 return IEEE80211_TX_FRAG_AGAIN;
1066                         local->mdev->trans_start = jiffies;
1067                         ieee80211_led_tx(local, 1);
1068                         tx->extra_frag[i] = NULL;
1069                 }
1070                 kfree(tx->extra_frag);
1071                 tx->extra_frag = NULL;
1072         }
1073         return IEEE80211_TX_OK;
1074 }
1075
1076 /*
1077  * Invoke TX handlers, return 0 on success and non-zero if the
1078  * frame was dropped or queued.
1079  */
1080 static int invoke_tx_handlers(struct ieee80211_tx_data *tx)
1081 {
1082         struct sk_buff *skb = tx->skb;
1083         ieee80211_tx_result res = TX_DROP;
1084         int i;
1085
1086 #define CALL_TXH(txh)           \
1087         res = txh(tx);          \
1088         if (res != TX_CONTINUE) \
1089                 goto txh_done;
1090
1091         CALL_TXH(ieee80211_tx_h_check_assoc)
1092         CALL_TXH(ieee80211_tx_h_ps_buf)
1093         CALL_TXH(ieee80211_tx_h_select_key)
1094         CALL_TXH(ieee80211_tx_h_michael_mic_add)
1095         CALL_TXH(ieee80211_tx_h_rate_ctrl)
1096         CALL_TXH(ieee80211_tx_h_misc)
1097         CALL_TXH(ieee80211_tx_h_sequence)
1098         CALL_TXH(ieee80211_tx_h_fragment)
1099         /* handlers after fragment must be aware of tx info fragmentation! */
1100         CALL_TXH(ieee80211_tx_h_encrypt)
1101         CALL_TXH(ieee80211_tx_h_calculate_duration)
1102         CALL_TXH(ieee80211_tx_h_stats)
1103 #undef CALL_TXH
1104
1105  txh_done:
1106         if (unlikely(res == TX_DROP)) {
1107                 I802_DEBUG_INC(tx->local->tx_handlers_drop);
1108                 dev_kfree_skb(skb);
1109                 for (i = 0; i < tx->num_extra_frag; i++)
1110                         if (tx->extra_frag[i])
1111                                 dev_kfree_skb(tx->extra_frag[i]);
1112                 kfree(tx->extra_frag);
1113                 return -1;
1114         } else if (unlikely(res == TX_QUEUED)) {
1115                 I802_DEBUG_INC(tx->local->tx_handlers_queued);
1116                 return -1;
1117         }
1118
1119         return 0;
1120 }
1121
1122 static int ieee80211_tx(struct net_device *dev, struct sk_buff *skb)
1123 {
1124         struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
1125         struct sta_info *sta;
1126         struct ieee80211_tx_data tx;
1127         ieee80211_tx_result res_prepare;
1128         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
1129         int ret, i;
1130         u16 queue;
1131
1132         queue = skb_get_queue_mapping(skb);
1133
1134         WARN_ON(test_bit(queue, local->queues_pending));
1135
1136         if (unlikely(skb->len < 10)) {
1137                 dev_kfree_skb(skb);
1138                 return 0;
1139         }
1140
1141         rcu_read_lock();
1142
1143         /* initialises tx */
1144         res_prepare = __ieee80211_tx_prepare(&tx, skb, dev);
1145
1146         if (res_prepare == TX_DROP) {
1147                 dev_kfree_skb(skb);
1148                 rcu_read_unlock();
1149                 return 0;
1150         }
1151
1152         sta = tx.sta;
1153         tx.channel = local->hw.conf.channel;
1154         info->band = tx.channel->band;
1155
1156         if (invoke_tx_handlers(&tx))
1157                 goto out;
1158
1159 retry:
1160         ret = __ieee80211_tx(local, skb, &tx);
1161         if (ret) {
1162                 struct ieee80211_tx_stored_packet *store;
1163
1164                 /*
1165                  * Since there are no fragmented frames on A-MPDU
1166                  * queues, there's no reason for a driver to reject
1167                  * a frame there, warn and drop it.
1168                  */
1169                 if (WARN_ON(queue >= ieee80211_num_regular_queues(&local->hw)))
1170                         goto drop;
1171
1172                 store = &local->pending_packet[queue];
1173
1174                 if (ret == IEEE80211_TX_FRAG_AGAIN)
1175                         skb = NULL;
1176
1177                 set_bit(queue, local->queues_pending);
1178                 smp_mb();
1179                 /*
1180                  * When the driver gets out of buffers during sending of
1181                  * fragments and calls ieee80211_stop_queue, the netif
1182                  * subqueue is stopped. There is, however, a small window
1183                  * in which the PENDING bit is not yet set. If a buffer
1184                  * gets available in that window (i.e. driver calls
1185                  * ieee80211_wake_queue), we would end up with ieee80211_tx
1186                  * called with the PENDING bit still set. Prevent this by
1187                  * continuing transmitting here when that situation is
1188                  * possible to have happened.
1189                  */
1190                 if (!__netif_subqueue_stopped(local->mdev, queue)) {
1191                         clear_bit(queue, local->queues_pending);
1192                         goto retry;
1193                 }
1194                 store->skb = skb;
1195                 store->extra_frag = tx.extra_frag;
1196                 store->num_extra_frag = tx.num_extra_frag;
1197                 store->last_frag_rate_idx = tx.last_frag_rate_idx;
1198                 store->last_frag_rate_ctrl_probe =
1199                         !!(tx.flags & IEEE80211_TX_PROBE_LAST_FRAG);
1200         }
1201  out:
1202         rcu_read_unlock();
1203         return 0;
1204
1205  drop:
1206         if (skb)
1207                 dev_kfree_skb(skb);
1208         for (i = 0; i < tx.num_extra_frag; i++)
1209                 if (tx.extra_frag[i])
1210                         dev_kfree_skb(tx.extra_frag[i]);
1211         kfree(tx.extra_frag);
1212         rcu_read_unlock();
1213         return 0;
1214 }
1215
1216 /* device xmit handlers */
1217
1218 static int ieee80211_skb_resize(struct ieee80211_local *local,
1219                                 struct sk_buff *skb,
1220                                 int head_need, bool may_encrypt)
1221 {
1222         int tail_need = 0;
1223
1224         /*
1225          * This could be optimised, devices that do full hardware
1226          * crypto (including TKIP MMIC) need no tailroom... But we
1227          * have no drivers for such devices currently.
1228          */
1229         if (may_encrypt) {
1230                 tail_need = IEEE80211_ENCRYPT_TAILROOM;
1231                 tail_need -= skb_tailroom(skb);
1232                 tail_need = max_t(int, tail_need, 0);
1233         }
1234
1235         if (head_need || tail_need) {
1236                 /* Sorry. Can't account for this any more */
1237                 skb_orphan(skb);
1238         }
1239
1240         if (skb_header_cloned(skb))
1241                 I802_DEBUG_INC(local->tx_expand_skb_head_cloned);
1242         else
1243                 I802_DEBUG_INC(local->tx_expand_skb_head);
1244
1245         if (pskb_expand_head(skb, head_need, tail_need, GFP_ATOMIC)) {
1246                 printk(KERN_DEBUG "%s: failed to reallocate TX buffer\n",
1247                        wiphy_name(local->hw.wiphy));
1248                 return -ENOMEM;
1249         }
1250
1251         /* update truesize too */
1252         skb->truesize += head_need + tail_need;
1253
1254         return 0;
1255 }
1256
1257 int ieee80211_master_start_xmit(struct sk_buff *skb, struct net_device *dev)
1258 {
1259         struct ieee80211_master_priv *mpriv = netdev_priv(dev);
1260         struct ieee80211_local *local = mpriv->local;
1261         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
1262         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
1263         struct net_device *odev = NULL;
1264         struct ieee80211_sub_if_data *osdata;
1265         int headroom;
1266         bool may_encrypt;
1267         enum {
1268                 NOT_MONITOR,
1269                 FOUND_SDATA,
1270                 UNKNOWN_ADDRESS,
1271         } monitor_iface = NOT_MONITOR;
1272         int ret;
1273
1274         if (skb->iif)
1275                 odev = dev_get_by_index(&init_net, skb->iif);
1276         if (unlikely(odev && !is_ieee80211_device(local, odev))) {
1277                 dev_put(odev);
1278                 odev = NULL;
1279         }
1280         if (unlikely(!odev)) {
1281 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
1282                 printk(KERN_DEBUG "%s: Discarded packet with nonexistent "
1283                        "originating device\n", dev->name);
1284 #endif
1285                 dev_kfree_skb(skb);
1286                 return 0;
1287         }
1288
1289         memset(info, 0, sizeof(*info));
1290
1291         info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
1292
1293         osdata = IEEE80211_DEV_TO_SUB_IF(odev);
1294
1295         if (ieee80211_vif_is_mesh(&osdata->vif) &&
1296             ieee80211_is_data(hdr->frame_control)) {
1297                 if (is_multicast_ether_addr(hdr->addr3))
1298                         memcpy(hdr->addr1, hdr->addr3, ETH_ALEN);
1299                 else
1300                         if (mesh_nexthop_lookup(skb, osdata))
1301                                 return  0;
1302                 if (memcmp(odev->dev_addr, hdr->addr4, ETH_ALEN) != 0)
1303                         IEEE80211_IFSTA_MESH_CTR_INC(&osdata->u.mesh,
1304                                                             fwded_frames);
1305         } else if (unlikely(osdata->vif.type == NL80211_IFTYPE_MONITOR)) {
1306                 struct ieee80211_sub_if_data *sdata;
1307                 int hdrlen;
1308                 u16 len_rthdr;
1309
1310                 info->flags |= IEEE80211_TX_CTL_INJECTED;
1311                 monitor_iface = UNKNOWN_ADDRESS;
1312
1313                 len_rthdr = ieee80211_get_radiotap_len(skb->data);
1314                 hdr = (struct ieee80211_hdr *)skb->data + len_rthdr;
1315                 hdrlen = ieee80211_hdrlen(hdr->frame_control);
1316
1317                 /* check the header is complete in the frame */
1318                 if (likely(skb->len >= len_rthdr + hdrlen)) {
1319                         /*
1320                          * We process outgoing injected frames that have a
1321                          * local address we handle as though they are our
1322                          * own frames.
1323                          * This code here isn't entirely correct, the local
1324                          * MAC address is not necessarily enough to find
1325                          * the interface to use; for that proper VLAN/WDS
1326                          * support we will need a different mechanism.
1327                          */
1328
1329                         rcu_read_lock();
1330                         list_for_each_entry_rcu(sdata, &local->interfaces,
1331                                                 list) {
1332                                 if (!netif_running(sdata->dev))
1333                                         continue;
1334                                 if (compare_ether_addr(sdata->dev->dev_addr,
1335                                                        hdr->addr2)) {
1336                                         dev_hold(sdata->dev);
1337                                         dev_put(odev);
1338                                         osdata = sdata;
1339                                         odev = osdata->dev;
1340                                         skb->iif = sdata->dev->ifindex;
1341                                         monitor_iface = FOUND_SDATA;
1342                                         break;
1343                                 }
1344                         }
1345                         rcu_read_unlock();
1346                 }
1347         }
1348
1349         may_encrypt = !skb->do_not_encrypt;
1350
1351         headroom = osdata->local->tx_headroom;
1352         if (may_encrypt)
1353                 headroom += IEEE80211_ENCRYPT_HEADROOM;
1354         headroom -= skb_headroom(skb);
1355         headroom = max_t(int, 0, headroom);
1356
1357         if (ieee80211_skb_resize(osdata->local, skb, headroom, may_encrypt)) {
1358                 dev_kfree_skb(skb);
1359                 dev_put(odev);
1360                 return 0;
1361         }
1362
1363         if (osdata->vif.type == NL80211_IFTYPE_AP_VLAN)
1364                 osdata = container_of(osdata->bss,
1365                                       struct ieee80211_sub_if_data,
1366                                       u.ap);
1367         if (likely(monitor_iface != UNKNOWN_ADDRESS))
1368                 info->control.vif = &osdata->vif;
1369         ret = ieee80211_tx(odev, skb);
1370         dev_put(odev);
1371
1372         return ret;
1373 }
1374
1375 int ieee80211_monitor_start_xmit(struct sk_buff *skb,
1376                                  struct net_device *dev)
1377 {
1378         struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
1379         struct ieee80211_radiotap_header *prthdr =
1380                 (struct ieee80211_radiotap_header *)skb->data;
1381         u16 len_rthdr;
1382
1383         /* check for not even having the fixed radiotap header part */
1384         if (unlikely(skb->len < sizeof(struct ieee80211_radiotap_header)))
1385                 goto fail; /* too short to be possibly valid */
1386
1387         /* is it a header version we can trust to find length from? */
1388         if (unlikely(prthdr->it_version))
1389                 goto fail; /* only version 0 is supported */
1390
1391         /* then there must be a radiotap header with a length we can use */
1392         len_rthdr = ieee80211_get_radiotap_len(skb->data);
1393
1394         /* does the skb contain enough to deliver on the alleged length? */
1395         if (unlikely(skb->len < len_rthdr))
1396                 goto fail; /* skb too short for claimed rt header extent */
1397
1398         skb->dev = local->mdev;
1399
1400         /* needed because we set skb device to master */
1401         skb->iif = dev->ifindex;
1402
1403         /* sometimes we do encrypt injected frames, will be fixed
1404          * up in radiotap parser if not wanted */
1405         skb->do_not_encrypt = 0;
1406
1407         /*
1408          * fix up the pointers accounting for the radiotap
1409          * header still being in there.  We are being given
1410          * a precooked IEEE80211 header so no need for
1411          * normal processing
1412          */
1413         skb_set_mac_header(skb, len_rthdr);
1414         /*
1415          * these are just fixed to the end of the rt area since we
1416          * don't have any better information and at this point, nobody cares
1417          */
1418         skb_set_network_header(skb, len_rthdr);
1419         skb_set_transport_header(skb, len_rthdr);
1420
1421         /* pass the radiotap header up to the next stage intact */
1422         dev_queue_xmit(skb);
1423         return NETDEV_TX_OK;
1424
1425 fail:
1426         dev_kfree_skb(skb);
1427         return NETDEV_TX_OK; /* meaning, we dealt with the skb */
1428 }
1429
1430 /**
1431  * ieee80211_subif_start_xmit - netif start_xmit function for Ethernet-type
1432  * subinterfaces (wlan#, WDS, and VLAN interfaces)
1433  * @skb: packet to be sent
1434  * @dev: incoming interface
1435  *
1436  * Returns: 0 on success (and frees skb in this case) or 1 on failure (skb will
1437  * not be freed, and caller is responsible for either retrying later or freeing
1438  * skb).
1439  *
1440  * This function takes in an Ethernet header and encapsulates it with suitable
1441  * IEEE 802.11 header based on which interface the packet is coming in. The
1442  * encapsulated packet will then be passed to master interface, wlan#.11, for
1443  * transmission (through low-level driver).
1444  */
1445 int ieee80211_subif_start_xmit(struct sk_buff *skb,
1446                                struct net_device *dev)
1447 {
1448         struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
1449         struct ieee80211_local *local = sdata->local;
1450         int ret = 1, head_need;
1451         u16 ethertype, hdrlen,  meshhdrlen = 0;
1452         __le16 fc;
1453         struct ieee80211_hdr hdr;
1454         struct ieee80211s_hdr mesh_hdr;
1455         const u8 *encaps_data;
1456         int encaps_len, skip_header_bytes;
1457         int nh_pos, h_pos;
1458         struct sta_info *sta;
1459         u32 sta_flags = 0;
1460
1461         if (unlikely(skb->len < ETH_HLEN)) {
1462                 ret = 0;
1463                 goto fail;
1464         }
1465
1466         nh_pos = skb_network_header(skb) - skb->data;
1467         h_pos = skb_transport_header(skb) - skb->data;
1468
1469         /* convert Ethernet header to proper 802.11 header (based on
1470          * operation mode) */
1471         ethertype = (skb->data[12] << 8) | skb->data[13];
1472         fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA);
1473
1474         switch (sdata->vif.type) {
1475         case NL80211_IFTYPE_AP:
1476         case NL80211_IFTYPE_AP_VLAN:
1477                 fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS);
1478                 /* DA BSSID SA */
1479                 memcpy(hdr.addr1, skb->data, ETH_ALEN);
1480                 memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN);
1481                 memcpy(hdr.addr3, skb->data + ETH_ALEN, ETH_ALEN);
1482                 hdrlen = 24;
1483                 break;
1484         case NL80211_IFTYPE_WDS:
1485                 fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
1486                 /* RA TA DA SA */
1487                 memcpy(hdr.addr1, sdata->u.wds.remote_addr, ETH_ALEN);
1488                 memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN);
1489                 memcpy(hdr.addr3, skb->data, ETH_ALEN);
1490                 memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN);
1491                 hdrlen = 30;
1492                 break;
1493 #ifdef CONFIG_MAC80211_MESH
1494         case NL80211_IFTYPE_MESH_POINT:
1495                 fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
1496                 if (!sdata->u.mesh.mshcfg.dot11MeshTTL) {
1497                         /* Do not send frames with mesh_ttl == 0 */
1498                         sdata->u.mesh.mshstats.dropped_frames_ttl++;
1499                         ret = 0;
1500                         goto fail;
1501                 }
1502                 memset(&mesh_hdr, 0, sizeof(mesh_hdr));
1503
1504                 if (compare_ether_addr(dev->dev_addr,
1505                                           skb->data + ETH_ALEN) == 0) {
1506                         /* RA TA DA SA */
1507                         memset(hdr.addr1, 0, ETH_ALEN);
1508                         memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN);
1509                         memcpy(hdr.addr3, skb->data, ETH_ALEN);
1510                         memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN);
1511                         meshhdrlen = ieee80211_new_mesh_header(&mesh_hdr, sdata);
1512                 } else {
1513                         /* packet from other interface */
1514                         struct mesh_path *mppath;
1515
1516                         memset(hdr.addr1, 0, ETH_ALEN);
1517                         memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN);
1518                         memcpy(hdr.addr4, dev->dev_addr, ETH_ALEN);
1519
1520                         if (is_multicast_ether_addr(skb->data))
1521                                 memcpy(hdr.addr3, skb->data, ETH_ALEN);
1522                         else {
1523                                 rcu_read_lock();
1524                                 mppath = mpp_path_lookup(skb->data, sdata);
1525                                 if (mppath)
1526                                         memcpy(hdr.addr3, mppath->mpp, ETH_ALEN);
1527                                 else
1528                                         memset(hdr.addr3, 0xff, ETH_ALEN);
1529                                 rcu_read_unlock();
1530                         }
1531
1532                         mesh_hdr.flags |= MESH_FLAGS_AE_A5_A6;
1533                         mesh_hdr.ttl = sdata->u.mesh.mshcfg.dot11MeshTTL;
1534                         put_unaligned(cpu_to_le32(sdata->u.mesh.mesh_seqnum), &mesh_hdr.seqnum);
1535                         memcpy(mesh_hdr.eaddr1, skb->data, ETH_ALEN);
1536                         memcpy(mesh_hdr.eaddr2, skb->data + ETH_ALEN, ETH_ALEN);
1537                         sdata->u.mesh.mesh_seqnum++;
1538                         meshhdrlen = 18;
1539                 }
1540                 hdrlen = 30;
1541                 break;
1542 #endif
1543         case NL80211_IFTYPE_STATION:
1544                 fc |= cpu_to_le16(IEEE80211_FCTL_TODS);
1545                 /* BSSID SA DA */
1546                 memcpy(hdr.addr1, sdata->u.sta.bssid, ETH_ALEN);
1547                 memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN);
1548                 memcpy(hdr.addr3, skb->data, ETH_ALEN);
1549                 hdrlen = 24;
1550                 break;
1551         case NL80211_IFTYPE_ADHOC:
1552                 /* DA SA BSSID */
1553                 memcpy(hdr.addr1, skb->data, ETH_ALEN);
1554                 memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN);
1555                 memcpy(hdr.addr3, sdata->u.sta.bssid, ETH_ALEN);
1556                 hdrlen = 24;
1557                 break;
1558         default:
1559                 ret = 0;
1560                 goto fail;
1561         }
1562
1563         /*
1564          * There's no need to try to look up the destination
1565          * if it is a multicast address (which can only happen
1566          * in AP mode)
1567          */
1568         if (!is_multicast_ether_addr(hdr.addr1)) {
1569                 rcu_read_lock();
1570                 sta = sta_info_get(local, hdr.addr1);
1571                 if (sta)
1572                         sta_flags = get_sta_flags(sta);
1573                 rcu_read_unlock();
1574         }
1575
1576         /* receiver and we are QoS enabled, use a QoS type frame */
1577         if (sta_flags & WLAN_STA_WME &&
1578             ieee80211_num_regular_queues(&local->hw) >= 4) {
1579                 fc |= cpu_to_le16(IEEE80211_STYPE_QOS_DATA);
1580                 hdrlen += 2;
1581         }
1582
1583         /*
1584          * Drop unicast frames to unauthorised stations unless they are
1585          * EAPOL frames from the local station.
1586          */
1587         if (!ieee80211_vif_is_mesh(&sdata->vif) &&
1588                 unlikely(!is_multicast_ether_addr(hdr.addr1) &&
1589                       !(sta_flags & WLAN_STA_AUTHORIZED) &&
1590                       !(ethertype == ETH_P_PAE &&
1591                        compare_ether_addr(dev->dev_addr,
1592                                           skb->data + ETH_ALEN) == 0))) {
1593 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
1594                 if (net_ratelimit())
1595                         printk(KERN_DEBUG "%s: dropped frame to %pM"
1596                                " (unauthorized port)\n", dev->name,
1597                                hdr.addr1);
1598 #endif
1599
1600                 I802_DEBUG_INC(local->tx_handlers_drop_unauth_port);
1601
1602                 ret = 0;
1603                 goto fail;
1604         }
1605
1606         hdr.frame_control = fc;
1607         hdr.duration_id = 0;
1608         hdr.seq_ctrl = 0;
1609
1610         skip_header_bytes = ETH_HLEN;
1611         if (ethertype == ETH_P_AARP || ethertype == ETH_P_IPX) {
1612                 encaps_data = bridge_tunnel_header;
1613                 encaps_len = sizeof(bridge_tunnel_header);
1614                 skip_header_bytes -= 2;
1615         } else if (ethertype >= 0x600) {
1616                 encaps_data = rfc1042_header;
1617                 encaps_len = sizeof(rfc1042_header);
1618                 skip_header_bytes -= 2;
1619         } else {
1620                 encaps_data = NULL;
1621                 encaps_len = 0;
1622         }
1623
1624         skb_pull(skb, skip_header_bytes);
1625         nh_pos -= skip_header_bytes;
1626         h_pos -= skip_header_bytes;
1627
1628         head_need = hdrlen + encaps_len + meshhdrlen - skb_headroom(skb);
1629
1630         /*
1631          * So we need to modify the skb header and hence need a copy of
1632          * that. The head_need variable above doesn't, so far, include
1633          * the needed header space that we don't need right away. If we
1634          * can, then we don't reallocate right now but only after the
1635          * frame arrives at the master device (if it does...)
1636          *
1637          * If we cannot, however, then we will reallocate to include all
1638          * the ever needed space. Also, if we need to reallocate it anyway,
1639          * make it big enough for everything we may ever need.
1640          */
1641
1642         if (head_need > 0 || skb_cloned(skb)) {
1643                 head_need += IEEE80211_ENCRYPT_HEADROOM;
1644                 head_need += local->tx_headroom;
1645                 head_need = max_t(int, 0, head_need);
1646                 if (ieee80211_skb_resize(local, skb, head_need, true))
1647                         goto fail;
1648         }
1649
1650         if (encaps_data) {
1651                 memcpy(skb_push(skb, encaps_len), encaps_data, encaps_len);
1652                 nh_pos += encaps_len;
1653                 h_pos += encaps_len;
1654         }
1655
1656         if (meshhdrlen > 0) {
1657                 memcpy(skb_push(skb, meshhdrlen), &mesh_hdr, meshhdrlen);
1658                 nh_pos += meshhdrlen;
1659                 h_pos += meshhdrlen;
1660         }
1661
1662         if (ieee80211_is_data_qos(fc)) {
1663                 __le16 *qos_control;
1664
1665                 qos_control = (__le16*) skb_push(skb, 2);
1666                 memcpy(skb_push(skb, hdrlen - 2), &hdr, hdrlen - 2);
1667                 /*
1668                  * Maybe we could actually set some fields here, for now just
1669                  * initialise to zero to indicate no special operation.
1670                  */
1671                 *qos_control = 0;
1672         } else
1673                 memcpy(skb_push(skb, hdrlen), &hdr, hdrlen);
1674
1675         nh_pos += hdrlen;
1676         h_pos += hdrlen;
1677
1678         skb->iif = dev->ifindex;
1679
1680         skb->dev = local->mdev;
1681         dev->stats.tx_packets++;
1682         dev->stats.tx_bytes += skb->len;
1683
1684         /* Update skb pointers to various headers since this modified frame
1685          * is going to go through Linux networking code that may potentially
1686          * need things like pointer to IP header. */
1687         skb_set_mac_header(skb, 0);
1688         skb_set_network_header(skb, nh_pos);
1689         skb_set_transport_header(skb, h_pos);
1690
1691         dev->trans_start = jiffies;
1692         dev_queue_xmit(skb);
1693
1694         return 0;
1695
1696  fail:
1697         if (!ret)
1698                 dev_kfree_skb(skb);
1699
1700         return ret;
1701 }
1702
1703
1704 /*
1705  * ieee80211_clear_tx_pending may not be called in a context where
1706  * it is possible that it packets could come in again.
1707  */
1708 void ieee80211_clear_tx_pending(struct ieee80211_local *local)
1709 {
1710         int i, j;
1711         struct ieee80211_tx_stored_packet *store;
1712
1713         for (i = 0; i < ieee80211_num_regular_queues(&local->hw); i++) {
1714                 if (!test_bit(i, local->queues_pending))
1715                         continue;
1716                 store = &local->pending_packet[i];
1717                 kfree_skb(store->skb);
1718                 for (j = 0; j < store->num_extra_frag; j++)
1719                         kfree_skb(store->extra_frag[j]);
1720                 kfree(store->extra_frag);
1721                 clear_bit(i, local->queues_pending);
1722         }
1723 }
1724
1725 /*
1726  * Transmit all pending packets. Called from tasklet, locks master device
1727  * TX lock so that no new packets can come in.
1728  */
1729 void ieee80211_tx_pending(unsigned long data)
1730 {
1731         struct ieee80211_local *local = (struct ieee80211_local *)data;
1732         struct net_device *dev = local->mdev;
1733         struct ieee80211_tx_stored_packet *store;
1734         struct ieee80211_tx_data tx;
1735         int i, ret;
1736
1737         netif_tx_lock_bh(dev);
1738         for (i = 0; i < ieee80211_num_regular_queues(&local->hw); i++) {
1739                 /* Check that this queue is ok */
1740                 if (__netif_subqueue_stopped(local->mdev, i) &&
1741                     !test_bit(i, local->queues_pending_run))
1742                         continue;
1743
1744                 if (!test_bit(i, local->queues_pending)) {
1745                         clear_bit(i, local->queues_pending_run);
1746                         ieee80211_wake_queue(&local->hw, i);
1747                         continue;
1748                 }
1749
1750                 clear_bit(i, local->queues_pending_run);
1751                 netif_start_subqueue(local->mdev, i);
1752
1753                 store = &local->pending_packet[i];
1754                 tx.extra_frag = store->extra_frag;
1755                 tx.num_extra_frag = store->num_extra_frag;
1756                 tx.last_frag_rate_idx = store->last_frag_rate_idx;
1757                 tx.flags = 0;
1758                 if (store->last_frag_rate_ctrl_probe)
1759                         tx.flags |= IEEE80211_TX_PROBE_LAST_FRAG;
1760                 ret = __ieee80211_tx(local, store->skb, &tx);
1761                 if (ret) {
1762                         if (ret == IEEE80211_TX_FRAG_AGAIN)
1763                                 store->skb = NULL;
1764                 } else {
1765                         clear_bit(i, local->queues_pending);
1766                         ieee80211_wake_queue(&local->hw, i);
1767                 }
1768         }
1769         netif_tx_unlock_bh(dev);
1770 }
1771
1772 /* functions for drivers to get certain frames */
1773
1774 static void ieee80211_beacon_add_tim(struct ieee80211_local *local,
1775                                      struct ieee80211_if_ap *bss,
1776                                      struct sk_buff *skb,
1777                                      struct beacon_data *beacon)
1778 {
1779         u8 *pos, *tim;
1780         int aid0 = 0;
1781         int i, have_bits = 0, n1, n2;
1782
1783         /* Generate bitmap for TIM only if there are any STAs in power save
1784          * mode. */
1785         if (atomic_read(&bss->num_sta_ps) > 0)
1786                 /* in the hope that this is faster than
1787                  * checking byte-for-byte */
1788                 have_bits = !bitmap_empty((unsigned long*)bss->tim,
1789                                           IEEE80211_MAX_AID+1);
1790
1791         if (bss->dtim_count == 0)
1792                 bss->dtim_count = beacon->dtim_period - 1;
1793         else
1794                 bss->dtim_count--;
1795
1796         tim = pos = (u8 *) skb_put(skb, 6);
1797         *pos++ = WLAN_EID_TIM;
1798         *pos++ = 4;
1799         *pos++ = bss->dtim_count;
1800         *pos++ = beacon->dtim_period;
1801
1802         if (bss->dtim_count == 0 && !skb_queue_empty(&bss->ps_bc_buf))
1803                 aid0 = 1;
1804
1805         if (have_bits) {
1806                 /* Find largest even number N1 so that bits numbered 1 through
1807                  * (N1 x 8) - 1 in the bitmap are 0 and number N2 so that bits
1808                  * (N2 + 1) x 8 through 2007 are 0. */
1809                 n1 = 0;
1810                 for (i = 0; i < IEEE80211_MAX_TIM_LEN; i++) {
1811                         if (bss->tim[i]) {
1812                                 n1 = i & 0xfe;
1813                                 break;
1814                         }
1815                 }
1816                 n2 = n1;
1817                 for (i = IEEE80211_MAX_TIM_LEN - 1; i >= n1; i--) {
1818                         if (bss->tim[i]) {
1819                                 n2 = i;
1820                                 break;
1821                         }
1822                 }
1823
1824                 /* Bitmap control */
1825                 *pos++ = n1 | aid0;
1826                 /* Part Virt Bitmap */
1827                 memcpy(pos, bss->tim + n1, n2 - n1 + 1);
1828
1829                 tim[1] = n2 - n1 + 4;
1830                 skb_put(skb, n2 - n1);
1831         } else {
1832                 *pos++ = aid0; /* Bitmap control */
1833                 *pos++ = 0; /* Part Virt Bitmap */
1834         }
1835 }
1836
1837 struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
1838                                      struct ieee80211_vif *vif)
1839 {
1840         struct ieee80211_local *local = hw_to_local(hw);
1841         struct sk_buff *skb = NULL;
1842         struct ieee80211_tx_info *info;
1843         struct net_device *bdev;
1844         struct ieee80211_sub_if_data *sdata = NULL;
1845         struct ieee80211_if_ap *ap = NULL;
1846         struct ieee80211_if_sta *ifsta = NULL;
1847         struct rate_selection rsel;
1848         struct beacon_data *beacon;
1849         struct ieee80211_supported_band *sband;
1850         enum ieee80211_band band = local->hw.conf.channel->band;
1851
1852         sband = local->hw.wiphy->bands[band];
1853
1854         rcu_read_lock();
1855
1856         sdata = vif_to_sdata(vif);
1857         bdev = sdata->dev;
1858
1859         if (sdata->vif.type == NL80211_IFTYPE_AP) {
1860                 ap = &sdata->u.ap;
1861                 beacon = rcu_dereference(ap->beacon);
1862                 if (ap && beacon) {
1863                         /*
1864                          * headroom, head length,
1865                          * tail length and maximum TIM length
1866                          */
1867                         skb = dev_alloc_skb(local->tx_headroom +
1868                                             beacon->head_len +
1869                                             beacon->tail_len + 256);
1870                         if (!skb)
1871                                 goto out;
1872
1873                         skb_reserve(skb, local->tx_headroom);
1874                         memcpy(skb_put(skb, beacon->head_len), beacon->head,
1875                                beacon->head_len);
1876
1877                         /*
1878                          * Not very nice, but we want to allow the driver to call
1879                          * ieee80211_beacon_get() as a response to the set_tim()
1880                          * callback. That, however, is already invoked under the
1881                          * sta_lock to guarantee consistent and race-free update
1882                          * of the tim bitmap in mac80211 and the driver.
1883                          */
1884                         if (local->tim_in_locked_section) {
1885                                 ieee80211_beacon_add_tim(local, ap, skb, beacon);
1886                         } else {
1887                                 unsigned long flags;
1888
1889                                 spin_lock_irqsave(&local->sta_lock, flags);
1890                                 ieee80211_beacon_add_tim(local, ap, skb, beacon);
1891                                 spin_unlock_irqrestore(&local->sta_lock, flags);
1892                         }
1893
1894                         if (beacon->tail)
1895                                 memcpy(skb_put(skb, beacon->tail_len),
1896                                        beacon->tail, beacon->tail_len);
1897                 } else
1898                         goto out;
1899         } else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
1900                 struct ieee80211_hdr *hdr;
1901                 ifsta = &sdata->u.sta;
1902
1903                 if (!ifsta->probe_resp)
1904                         goto out;
1905
1906                 skb = skb_copy(ifsta->probe_resp, GFP_ATOMIC);
1907                 if (!skb)
1908                         goto out;
1909
1910                 hdr = (struct ieee80211_hdr *) skb->data;
1911                 hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
1912                                                  IEEE80211_STYPE_BEACON);
1913
1914         } else if (ieee80211_vif_is_mesh(&sdata->vif)) {
1915                 struct ieee80211_mgmt *mgmt;
1916                 u8 *pos;
1917
1918                 /* headroom, head length, tail length and maximum TIM length */
1919                 skb = dev_alloc_skb(local->tx_headroom + 400);
1920                 if (!skb)
1921                         goto out;
1922
1923                 skb_reserve(skb, local->hw.extra_tx_headroom);
1924                 mgmt = (struct ieee80211_mgmt *)
1925                         skb_put(skb, 24 + sizeof(mgmt->u.beacon));
1926                 memset(mgmt, 0, 24 + sizeof(mgmt->u.beacon));
1927                 mgmt->frame_control =
1928                     cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON);
1929                 memset(mgmt->da, 0xff, ETH_ALEN);
1930                 memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
1931                 /* BSSID is left zeroed, wildcard value */
1932                 mgmt->u.beacon.beacon_int =
1933                         cpu_to_le16(local->hw.conf.beacon_int);
1934                 mgmt->u.beacon.capab_info = 0x0; /* 0x0 for MPs */
1935
1936                 pos = skb_put(skb, 2);
1937                 *pos++ = WLAN_EID_SSID;
1938                 *pos++ = 0x0;
1939
1940                 mesh_mgmt_ies_add(skb, sdata);
1941         } else {
1942                 WARN_ON(1);
1943                 goto out;
1944         }
1945
1946         info = IEEE80211_SKB_CB(skb);
1947
1948         skb->do_not_encrypt = 1;
1949
1950         info->band = band;
1951         rate_control_get_rate(sdata, sband, NULL, skb, &rsel);
1952
1953         if (unlikely(rsel.rate_idx < 0)) {
1954                 if (net_ratelimit()) {
1955                         printk(KERN_DEBUG "%s: ieee80211_beacon_get: "
1956                                "no rate found\n",
1957                                wiphy_name(local->hw.wiphy));
1958                 }
1959                 dev_kfree_skb_any(skb);
1960                 skb = NULL;
1961                 goto out;
1962         }
1963
1964         info->control.vif = vif;
1965         info->tx_rate_idx = rsel.rate_idx;
1966
1967         info->flags |= IEEE80211_TX_CTL_NO_ACK;
1968         info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
1969         info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ;
1970         if (sdata->bss_conf.use_short_preamble &&
1971             sband->bitrates[rsel.rate_idx].flags & IEEE80211_RATE_SHORT_PREAMBLE)
1972                 info->flags |= IEEE80211_TX_CTL_SHORT_PREAMBLE;
1973
1974         info->antenna_sel_tx = local->hw.conf.antenna_sel_tx;
1975         info->control.retry_limit = 1;
1976
1977 out:
1978         rcu_read_unlock();
1979         return skb;
1980 }
1981 EXPORT_SYMBOL(ieee80211_beacon_get);
1982
1983 void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
1984                        const void *frame, size_t frame_len,
1985                        const struct ieee80211_tx_info *frame_txctl,
1986                        struct ieee80211_rts *rts)
1987 {
1988         const struct ieee80211_hdr *hdr = frame;
1989
1990         rts->frame_control =
1991             cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_RTS);
1992         rts->duration = ieee80211_rts_duration(hw, vif, frame_len,
1993                                                frame_txctl);
1994         memcpy(rts->ra, hdr->addr1, sizeof(rts->ra));
1995         memcpy(rts->ta, hdr->addr2, sizeof(rts->ta));
1996 }
1997 EXPORT_SYMBOL(ieee80211_rts_get);
1998
1999 void ieee80211_ctstoself_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
2000                              const void *frame, size_t frame_len,
2001                              const struct ieee80211_tx_info *frame_txctl,
2002                              struct ieee80211_cts *cts)
2003 {
2004         const struct ieee80211_hdr *hdr = frame;
2005
2006         cts->frame_control =
2007             cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTS);
2008         cts->duration = ieee80211_ctstoself_duration(hw, vif,
2009                                                      frame_len, frame_txctl);
2010         memcpy(cts->ra, hdr->addr1, sizeof(cts->ra));
2011 }
2012 EXPORT_SYMBOL(ieee80211_ctstoself_get);
2013
2014 struct sk_buff *
2015 ieee80211_get_buffered_bc(struct ieee80211_hw *hw,
2016                           struct ieee80211_vif *vif)
2017 {
2018         struct ieee80211_local *local = hw_to_local(hw);
2019         struct sk_buff *skb = NULL;
2020         struct sta_info *sta;
2021         struct ieee80211_tx_data tx;
2022         struct net_device *bdev;
2023         struct ieee80211_sub_if_data *sdata;
2024         struct ieee80211_if_ap *bss = NULL;
2025         struct beacon_data *beacon;
2026         struct ieee80211_tx_info *info;
2027
2028         sdata = vif_to_sdata(vif);
2029         bdev = sdata->dev;
2030         bss = &sdata->u.ap;
2031
2032         if (!bss)
2033                 return NULL;
2034
2035         rcu_read_lock();
2036         beacon = rcu_dereference(bss->beacon);
2037
2038         if (sdata->vif.type != NL80211_IFTYPE_AP || !beacon || !beacon->head)
2039                 goto out;
2040
2041         if (bss->dtim_count != 0)
2042                 goto out; /* send buffered bc/mc only after DTIM beacon */
2043
2044         while (1) {
2045                 skb = skb_dequeue(&bss->ps_bc_buf);
2046                 if (!skb)
2047                         goto out;
2048                 local->total_ps_buffered--;
2049
2050                 if (!skb_queue_empty(&bss->ps_bc_buf) && skb->len >= 2) {
2051                         struct ieee80211_hdr *hdr =
2052                                 (struct ieee80211_hdr *) skb->data;
2053                         /* more buffered multicast/broadcast frames ==> set
2054                          * MoreData flag in IEEE 802.11 header to inform PS
2055                          * STAs */
2056                         hdr->frame_control |=
2057                                 cpu_to_le16(IEEE80211_FCTL_MOREDATA);
2058                 }
2059
2060                 if (!ieee80211_tx_prepare(local, &tx, skb))
2061                         break;
2062                 dev_kfree_skb_any(skb);
2063         }
2064
2065         info = IEEE80211_SKB_CB(skb);
2066
2067         sta = tx.sta;
2068         tx.flags |= IEEE80211_TX_PS_BUFFERED;
2069         tx.channel = local->hw.conf.channel;
2070         info->band = tx.channel->band;
2071
2072         if (invoke_tx_handlers(&tx))
2073                 skb = NULL;
2074  out:
2075         rcu_read_unlock();
2076
2077         return skb;
2078 }
2079 EXPORT_SYMBOL(ieee80211_get_buffered_bc);