2 * Copyright 2002-2005, Instant802 Networks, Inc.
3 * Copyright 2005-2006, Devicescape Software, Inc.
4 * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
11 #include <net/mac80211.h>
12 #include <net/ieee80211_radiotap.h>
13 #include <linux/module.h>
14 #include <linux/init.h>
15 #include <linux/netdevice.h>
16 #include <linux/types.h>
17 #include <linux/slab.h>
18 #include <linux/skbuff.h>
19 #include <linux/etherdevice.h>
20 #include <linux/if_arp.h>
21 #include <linux/wireless.h>
22 #include <linux/rtnetlink.h>
23 #include <linux/bitmap.h>
24 #include <net/net_namespace.h>
25 #include <net/cfg80211.h>
27 #include "ieee80211_i.h"
36 #include "debugfs_netdev.h"
39 * For seeing transmitted packets on monitor interfaces
40 * we have a radiotap header too.
42 struct ieee80211_tx_status_rtap_hdr {
43 struct ieee80211_radiotap_header hdr;
46 } __attribute__ ((packed));
49 /* must be called under mdev tx lock */
50 void ieee80211_configure_filter(struct ieee80211_local *local)
52 unsigned int changed_flags;
53 unsigned int new_flags = 0;
55 if (atomic_read(&local->iff_promiscs))
56 new_flags |= FIF_PROMISC_IN_BSS;
58 if (atomic_read(&local->iff_allmultis))
59 new_flags |= FIF_ALLMULTI;
62 new_flags |= FIF_BCN_PRBRESP_PROMISC;
64 if (local->fif_fcsfail)
65 new_flags |= FIF_FCSFAIL;
67 if (local->fif_plcpfail)
68 new_flags |= FIF_PLCPFAIL;
70 if (local->fif_control)
71 new_flags |= FIF_CONTROL;
73 if (local->fif_other_bss)
74 new_flags |= FIF_OTHER_BSS;
76 changed_flags = local->filter_flags ^ new_flags;
81 local->ops->configure_filter(local_to_hw(local),
82 changed_flags, &new_flags,
83 local->mdev->mc_count,
84 local->mdev->mc_list);
86 WARN_ON(new_flags & (1<<31));
88 local->filter_flags = new_flags & ~(1<<31);
91 /* master interface */
93 static int header_parse_80211(const struct sk_buff *skb, unsigned char *haddr)
95 memcpy(haddr, skb_mac_header(skb) + 10, ETH_ALEN); /* addr2 */
99 static const struct header_ops ieee80211_header_ops = {
100 .create = eth_header,
101 .parse = header_parse_80211,
102 .rebuild = eth_rebuild_header,
103 .cache = eth_header_cache,
104 .cache_update = eth_header_cache_update,
107 static int ieee80211_master_open(struct net_device *dev)
109 struct ieee80211_master_priv *mpriv = netdev_priv(dev);
110 struct ieee80211_local *local = mpriv->local;
111 struct ieee80211_sub_if_data *sdata;
112 int res = -EOPNOTSUPP;
114 /* we hold the RTNL here so can safely walk the list */
115 list_for_each_entry(sdata, &local->interfaces, list) {
116 if (netif_running(sdata->dev)) {
125 netif_tx_start_all_queues(local->mdev);
130 static int ieee80211_master_stop(struct net_device *dev)
132 struct ieee80211_master_priv *mpriv = netdev_priv(dev);
133 struct ieee80211_local *local = mpriv->local;
134 struct ieee80211_sub_if_data *sdata;
136 /* we hold the RTNL here so can safely walk the list */
137 list_for_each_entry(sdata, &local->interfaces, list)
138 if (netif_running(sdata->dev))
139 dev_close(sdata->dev);
144 static void ieee80211_master_set_multicast_list(struct net_device *dev)
146 struct ieee80211_master_priv *mpriv = netdev_priv(dev);
147 struct ieee80211_local *local = mpriv->local;
149 ieee80211_configure_filter(local);
152 /* everything else */
154 int ieee80211_if_config(struct ieee80211_sub_if_data *sdata, u32 changed)
156 struct ieee80211_local *local = sdata->local;
157 struct ieee80211_if_conf conf;
159 if (WARN_ON(!netif_running(sdata->dev)))
162 if (WARN_ON(sdata->vif.type == NL80211_IFTYPE_AP_VLAN))
165 if (!local->ops->config_interface)
168 memset(&conf, 0, sizeof(conf));
169 conf.changed = changed;
171 if (sdata->vif.type == NL80211_IFTYPE_STATION ||
172 sdata->vif.type == NL80211_IFTYPE_ADHOC) {
173 conf.bssid = sdata->u.sta.bssid;
174 conf.ssid = sdata->u.sta.ssid;
175 conf.ssid_len = sdata->u.sta.ssid_len;
176 } else if (sdata->vif.type == NL80211_IFTYPE_AP) {
177 conf.bssid = sdata->dev->dev_addr;
178 conf.ssid = sdata->u.ap.ssid;
179 conf.ssid_len = sdata->u.ap.ssid_len;
180 } else if (ieee80211_vif_is_mesh(&sdata->vif)) {
181 u8 zero[ETH_ALEN] = { 0 };
190 if (WARN_ON(!conf.bssid && (changed & IEEE80211_IFCC_BSSID)))
193 if (WARN_ON(!conf.ssid && (changed & IEEE80211_IFCC_SSID)))
196 return local->ops->config_interface(local_to_hw(local),
200 int ieee80211_hw_config(struct ieee80211_local *local)
202 struct ieee80211_channel *chan;
205 if (local->sw_scanning)
206 chan = local->scan_channel;
208 chan = local->oper_channel;
210 local->hw.conf.channel = chan;
212 if (!local->hw.conf.power_level)
213 local->hw.conf.power_level = chan->max_power;
215 local->hw.conf.power_level = min(chan->max_power,
216 local->hw.conf.power_level);
218 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
219 printk(KERN_DEBUG "%s: HW CONFIG: freq=%d\n",
220 wiphy_name(local->hw.wiphy), chan->center_freq);
223 if (local->open_count) {
224 ret = local->ops->config(local_to_hw(local), &local->hw.conf);
226 * HW reconfiguration should never fail, the driver has told
227 * us what it can support so it should live up to that promise.
235 void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
238 struct ieee80211_local *local = sdata->local;
240 if (WARN_ON(sdata->vif.type == NL80211_IFTYPE_AP_VLAN))
246 if (local->ops->bss_info_changed)
247 local->ops->bss_info_changed(local_to_hw(local),
253 u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata)
255 sdata->bss_conf.use_cts_prot = false;
256 sdata->bss_conf.use_short_preamble = false;
257 sdata->bss_conf.use_short_slot = false;
258 return BSS_CHANGED_ERP_CTS_PROT |
259 BSS_CHANGED_ERP_PREAMBLE |
260 BSS_CHANGED_ERP_SLOT;
263 void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
266 struct ieee80211_local *local = hw_to_local(hw);
267 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
270 skb->dev = local->mdev;
271 skb->pkt_type = IEEE80211_TX_STATUS_MSG;
272 skb_queue_tail(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS ?
273 &local->skb_queue : &local->skb_queue_unreliable, skb);
274 tmp = skb_queue_len(&local->skb_queue) +
275 skb_queue_len(&local->skb_queue_unreliable);
276 while (tmp > IEEE80211_IRQSAFE_QUEUE_LIMIT &&
277 (skb = skb_dequeue(&local->skb_queue_unreliable))) {
278 dev_kfree_skb_irq(skb);
280 I802_DEBUG_INC(local->tx_status_drop);
282 tasklet_schedule(&local->tasklet);
284 EXPORT_SYMBOL(ieee80211_tx_status_irqsafe);
286 static void ieee80211_tasklet_handler(unsigned long data)
288 struct ieee80211_local *local = (struct ieee80211_local *) data;
290 struct ieee80211_rx_status rx_status;
291 struct ieee80211_ra_tid *ra_tid;
293 while ((skb = skb_dequeue(&local->skb_queue)) ||
294 (skb = skb_dequeue(&local->skb_queue_unreliable))) {
295 switch (skb->pkt_type) {
296 case IEEE80211_RX_MSG:
297 /* status is in skb->cb */
298 memcpy(&rx_status, skb->cb, sizeof(rx_status));
299 /* Clear skb->pkt_type in order to not confuse kernel
302 __ieee80211_rx(local_to_hw(local), skb, &rx_status);
304 case IEEE80211_TX_STATUS_MSG:
306 ieee80211_tx_status(local_to_hw(local), skb);
308 case IEEE80211_DELBA_MSG:
309 ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
310 ieee80211_stop_tx_ba_cb(local_to_hw(local),
311 ra_tid->ra, ra_tid->tid);
314 case IEEE80211_ADDBA_MSG:
315 ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
316 ieee80211_start_tx_ba_cb(local_to_hw(local),
317 ra_tid->ra, ra_tid->tid);
328 /* Remove added headers (e.g., QoS control), encryption header/MIC, etc. to
329 * make a prepared TX frame (one that has been given to hw) to look like brand
330 * new IEEE 802.11 frame that is ready to go through TX processing again.
332 static void ieee80211_remove_tx_extra(struct ieee80211_local *local,
333 struct ieee80211_key *key,
336 unsigned int hdrlen, iv_len, mic_len;
337 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
339 hdrlen = ieee80211_hdrlen(hdr->frame_control);
344 switch (key->conf.alg) {
347 mic_len = WEP_ICV_LEN;
350 iv_len = TKIP_IV_LEN;
351 mic_len = TKIP_ICV_LEN;
354 iv_len = CCMP_HDR_LEN;
355 mic_len = CCMP_MIC_LEN;
361 if (skb->len >= hdrlen + mic_len &&
362 !(key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE))
363 skb_trim(skb, skb->len - mic_len);
364 if (skb->len >= hdrlen + iv_len) {
365 memmove(skb->data + iv_len, skb->data, hdrlen);
366 hdr = (struct ieee80211_hdr *)skb_pull(skb, iv_len);
370 if (ieee80211_is_data_qos(hdr->frame_control)) {
371 hdr->frame_control &= ~cpu_to_le16(IEEE80211_STYPE_QOS_DATA);
372 memmove(skb->data + IEEE80211_QOS_CTL_LEN, skb->data,
373 hdrlen - IEEE80211_QOS_CTL_LEN);
374 skb_pull(skb, IEEE80211_QOS_CTL_LEN);
378 static void ieee80211_handle_filtered_frame(struct ieee80211_local *local,
379 struct sta_info *sta,
382 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
384 sta->tx_filtered_count++;
387 * Clear the TX filter mask for this STA when sending the next
388 * packet. If the STA went to power save mode, this will happen
389 * when it wakes up for the next time.
391 set_sta_flags(sta, WLAN_STA_CLEAR_PS_FILT);
394 * This code races in the following way:
396 * (1) STA sends frame indicating it will go to sleep and does so
397 * (2) hardware/firmware adds STA to filter list, passes frame up
398 * (3) hardware/firmware processes TX fifo and suppresses a frame
399 * (4) we get TX status before having processed the frame and
400 * knowing that the STA has gone to sleep.
402 * This is actually quite unlikely even when both those events are
403 * processed from interrupts coming in quickly after one another or
404 * even at the same time because we queue both TX status events and
405 * RX frames to be processed by a tasklet and process them in the
406 * same order that they were received or TX status last. Hence, there
407 * is no race as long as the frame RX is processed before the next TX
408 * status, which drivers can ensure, see below.
410 * Note that this can only happen if the hardware or firmware can
411 * actually add STAs to the filter list, if this is done by the
412 * driver in response to set_tim() (which will only reduce the race
413 * this whole filtering tries to solve, not completely solve it)
414 * this situation cannot happen.
416 * To completely solve this race drivers need to make sure that they
417 * (a) don't mix the irq-safe/not irq-safe TX status/RX processing
419 * (b) always process RX events before TX status events if ordering
420 * can be unknown, for example with different interrupt status
423 if (test_sta_flags(sta, WLAN_STA_PS) &&
424 skb_queue_len(&sta->tx_filtered) < STA_MAX_TX_BUFFER) {
425 ieee80211_remove_tx_extra(local, sta->key, skb);
426 skb_queue_tail(&sta->tx_filtered, skb);
430 if (!test_sta_flags(sta, WLAN_STA_PS) &&
431 !(info->flags & IEEE80211_TX_CTL_REQUEUE)) {
432 /* Software retry the packet once */
433 info->flags |= IEEE80211_TX_CTL_REQUEUE;
434 ieee80211_remove_tx_extra(local, sta->key, skb);
439 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
441 printk(KERN_DEBUG "%s: dropped TX filtered frame, "
442 "queue_len=%d PS=%d @%lu\n",
443 wiphy_name(local->hw.wiphy),
444 skb_queue_len(&sta->tx_filtered),
445 !!test_sta_flags(sta, WLAN_STA_PS), jiffies);
450 void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
452 struct sk_buff *skb2;
453 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
454 struct ieee80211_local *local = hw_to_local(hw);
455 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
458 struct ieee80211_supported_band *sband;
459 struct ieee80211_tx_status_rtap_hdr *rthdr;
460 struct ieee80211_sub_if_data *sdata;
461 struct net_device *prev_dev = NULL;
462 struct sta_info *sta;
466 sta = sta_info_get(local, hdr->addr1);
469 if (info->status.excessive_retries &&
470 test_sta_flags(sta, WLAN_STA_PS)) {
472 * The STA is in power save mode, so assume
473 * that this TX packet failed because of that.
475 ieee80211_handle_filtered_frame(local, sta, skb);
480 fc = hdr->frame_control;
482 if ((info->flags & IEEE80211_TX_STAT_AMPDU_NO_BACK) &&
483 (ieee80211_is_data_qos(fc))) {
487 qc = ieee80211_get_qos_ctl(hdr);
489 ssn = ((le16_to_cpu(hdr->seq_ctrl) + 0x10)
490 & IEEE80211_SCTL_SEQ);
491 ieee80211_send_bar(sta->sdata, hdr->addr1,
495 if (info->flags & IEEE80211_TX_STAT_TX_FILTERED) {
496 ieee80211_handle_filtered_frame(local, sta, skb);
500 if (info->status.excessive_retries)
501 sta->tx_retry_failed++;
502 sta->tx_retry_count += info->status.retry_count;
505 sband = local->hw.wiphy->bands[info->band];
506 rate_control_tx_status(local, sband, sta, skb);
511 ieee80211_led_tx(local, 0);
514 * Fragments are passed to low-level drivers as separate skbs, so these
515 * are actually fragments, not frames. Update frame counters only for
516 * the first fragment of the frame. */
518 frag = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG;
519 type = le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_FTYPE;
521 if (info->flags & IEEE80211_TX_STAT_ACK) {
523 local->dot11TransmittedFrameCount++;
524 if (is_multicast_ether_addr(hdr->addr1))
525 local->dot11MulticastTransmittedFrameCount++;
526 if (info->status.retry_count > 0)
527 local->dot11RetryCount++;
528 if (info->status.retry_count > 1)
529 local->dot11MultipleRetryCount++;
532 /* This counter shall be incremented for an acknowledged MPDU
533 * with an individual address in the address 1 field or an MPDU
534 * with a multicast address in the address 1 field of type Data
536 if (!is_multicast_ether_addr(hdr->addr1) ||
537 type == IEEE80211_FTYPE_DATA ||
538 type == IEEE80211_FTYPE_MGMT)
539 local->dot11TransmittedFragmentCount++;
542 local->dot11FailedCount++;
545 /* this was a transmitted frame, but now we want to reuse it */
549 * This is a bit racy but we can avoid a lot of work
552 if (!local->monitors && !local->cooked_mntrs) {
557 /* send frame to monitor interfaces now */
559 if (skb_headroom(skb) < sizeof(*rthdr)) {
560 printk(KERN_ERR "ieee80211_tx_status: headroom too small\n");
565 rthdr = (struct ieee80211_tx_status_rtap_hdr *)
566 skb_push(skb, sizeof(*rthdr));
568 memset(rthdr, 0, sizeof(*rthdr));
569 rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr));
570 rthdr->hdr.it_present =
571 cpu_to_le32((1 << IEEE80211_RADIOTAP_TX_FLAGS) |
572 (1 << IEEE80211_RADIOTAP_DATA_RETRIES));
574 if (!(info->flags & IEEE80211_TX_STAT_ACK) &&
575 !is_multicast_ether_addr(hdr->addr1))
576 rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_FAIL);
578 if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) &&
579 (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT))
580 rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_CTS);
581 else if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS)
582 rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_RTS);
584 rthdr->data_retries = info->status.retry_count;
586 /* XXX: is this sufficient for BPF? */
587 skb_set_mac_header(skb, 0);
588 skb->ip_summed = CHECKSUM_UNNECESSARY;
589 skb->pkt_type = PACKET_OTHERHOST;
590 skb->protocol = htons(ETH_P_802_2);
591 memset(skb->cb, 0, sizeof(skb->cb));
594 list_for_each_entry_rcu(sdata, &local->interfaces, list) {
595 if (sdata->vif.type == NL80211_IFTYPE_MONITOR) {
596 if (!netif_running(sdata->dev))
600 skb2 = skb_clone(skb, GFP_ATOMIC);
602 skb2->dev = prev_dev;
607 prev_dev = sdata->dev;
618 EXPORT_SYMBOL(ieee80211_tx_status);
620 struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
621 const struct ieee80211_ops *ops)
623 struct ieee80211_local *local;
627 /* Ensure 32-byte alignment of our private data and hw private data.
628 * We use the wiphy priv data for both our ieee80211_local and for
629 * the driver's private data
631 * In memory it'll be like this:
633 * +-------------------------+
635 * +-------------------------+
636 * | struct ieee80211_local |
637 * +-------------------------+
638 * | driver's private data |
639 * +-------------------------+
642 priv_size = ((sizeof(struct ieee80211_local) +
643 NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST) +
646 wiphy = wiphy_new(&mac80211_config_ops, priv_size);
651 wiphy->privid = mac80211_wiphy_privid;
653 local = wiphy_priv(wiphy);
654 local->hw.wiphy = wiphy;
656 local->hw.priv = (char *)local +
657 ((sizeof(struct ieee80211_local) +
658 NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST);
663 BUG_ON(!ops->config);
664 BUG_ON(!ops->add_interface);
665 BUG_ON(!ops->remove_interface);
666 BUG_ON(!ops->configure_filter);
669 local->hw.queues = 1; /* default */
671 local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
672 local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
673 local->short_retry_limit = 7;
674 local->long_retry_limit = 4;
675 local->hw.conf.radio_enabled = 1;
677 INIT_LIST_HEAD(&local->interfaces);
679 spin_lock_init(&local->key_lock);
681 INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work);
683 sta_info_init(local);
685 tasklet_init(&local->tx_pending_tasklet, ieee80211_tx_pending,
686 (unsigned long)local);
687 tasklet_disable(&local->tx_pending_tasklet);
689 tasklet_init(&local->tasklet,
690 ieee80211_tasklet_handler,
691 (unsigned long) local);
692 tasklet_disable(&local->tasklet);
694 skb_queue_head_init(&local->skb_queue);
695 skb_queue_head_init(&local->skb_queue_unreliable);
697 return local_to_hw(local);
699 EXPORT_SYMBOL(ieee80211_alloc_hw);
701 int ieee80211_register_hw(struct ieee80211_hw *hw)
703 struct ieee80211_local *local = hw_to_local(hw);
706 enum ieee80211_band band;
707 struct net_device *mdev;
708 struct ieee80211_master_priv *mpriv;
711 * generic code guarantees at least one band,
712 * set this very early because much code assumes
713 * that hw.conf.channel is assigned
715 for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
716 struct ieee80211_supported_band *sband;
718 sband = local->hw.wiphy->bands[band];
720 /* init channel we're on */
721 local->hw.conf.channel =
722 local->oper_channel =
723 local->scan_channel = &sband->channels[0];
728 /* if low-level driver supports AP, we also support VLAN */
729 if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_AP))
730 local->hw.wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP_VLAN);
732 /* mac80211 always supports monitor */
733 local->hw.wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
735 result = wiphy_register(local->hw.wiphy);
740 * We use the number of queues for feature tests (QoS, HT) internally
741 * so restrict them appropriately.
743 if (hw->queues > IEEE80211_MAX_QUEUES)
744 hw->queues = IEEE80211_MAX_QUEUES;
745 if (hw->ampdu_queues > IEEE80211_MAX_AMPDU_QUEUES)
746 hw->ampdu_queues = IEEE80211_MAX_AMPDU_QUEUES;
748 hw->ampdu_queues = 0;
750 mdev = alloc_netdev_mq(sizeof(struct ieee80211_master_priv),
751 "wmaster%d", ether_setup,
752 ieee80211_num_queues(hw));
754 goto fail_mdev_alloc;
756 mpriv = netdev_priv(mdev);
757 mpriv->local = local;
760 ieee80211_rx_bss_list_init(local);
762 mdev->hard_start_xmit = ieee80211_master_start_xmit;
763 mdev->open = ieee80211_master_open;
764 mdev->stop = ieee80211_master_stop;
765 mdev->type = ARPHRD_IEEE80211;
766 mdev->header_ops = &ieee80211_header_ops;
767 mdev->set_multicast_list = ieee80211_master_set_multicast_list;
769 name = wiphy_dev(local->hw.wiphy)->driver->name;
770 local->hw.workqueue = create_freezeable_workqueue(name);
771 if (!local->hw.workqueue) {
777 * The hardware needs headroom for sending the frame,
778 * and we need some headroom for passing the frame to monitor
779 * interfaces, but never both at the same time.
781 local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom,
782 sizeof(struct ieee80211_tx_status_rtap_hdr));
784 debugfs_hw_add(local);
786 if (local->hw.conf.beacon_int < 10)
787 local->hw.conf.beacon_int = 100;
789 if (local->hw.max_listen_interval == 0)
790 local->hw.max_listen_interval = 1;
792 local->hw.conf.listen_interval = local->hw.max_listen_interval;
794 local->wstats_flags |= local->hw.flags & (IEEE80211_HW_SIGNAL_UNSPEC |
795 IEEE80211_HW_SIGNAL_DB |
796 IEEE80211_HW_SIGNAL_DBM) ?
797 IW_QUAL_QUAL_UPDATED : IW_QUAL_QUAL_INVALID;
798 local->wstats_flags |= local->hw.flags & IEEE80211_HW_NOISE_DBM ?
799 IW_QUAL_NOISE_UPDATED : IW_QUAL_NOISE_INVALID;
800 if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
801 local->wstats_flags |= IW_QUAL_DBM;
803 result = sta_info_start(local);
808 result = dev_alloc_name(local->mdev, local->mdev->name);
812 memcpy(local->mdev->dev_addr, local->hw.wiphy->perm_addr, ETH_ALEN);
813 SET_NETDEV_DEV(local->mdev, wiphy_dev(local->hw.wiphy));
815 result = register_netdevice(local->mdev);
819 result = ieee80211_init_rate_ctrl_alg(local,
820 hw->rate_control_algorithm);
822 printk(KERN_DEBUG "%s: Failed to initialize rate control "
823 "algorithm\n", wiphy_name(local->hw.wiphy));
827 result = ieee80211_wep_init(local);
830 printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n",
831 wiphy_name(local->hw.wiphy), result);
835 local->mdev->select_queue = ieee80211_select_queue;
837 /* add one default STA interface */
838 result = ieee80211_if_add(local, "wlan%d", NULL,
839 NL80211_IFTYPE_STATION, NULL);
841 printk(KERN_WARNING "%s: Failed to add default virtual iface\n",
842 wiphy_name(local->hw.wiphy));
846 ieee80211_led_init(local);
851 rate_control_deinitialize(local);
853 unregister_netdevice(local->mdev);
857 sta_info_stop(local);
859 debugfs_hw_del(local);
860 destroy_workqueue(local->hw.workqueue);
863 free_netdev(local->mdev);
865 wiphy_unregister(local->hw.wiphy);
868 EXPORT_SYMBOL(ieee80211_register_hw);
870 void ieee80211_unregister_hw(struct ieee80211_hw *hw)
872 struct ieee80211_local *local = hw_to_local(hw);
874 tasklet_kill(&local->tx_pending_tasklet);
875 tasklet_kill(&local->tasklet);
880 * At this point, interface list manipulations are fine
881 * because the driver cannot be handing us frames any
882 * more and the tasklet is killed.
885 /* First, we remove all virtual interfaces. */
886 ieee80211_remove_interfaces(local);
888 /* then, finally, remove the master interface */
889 unregister_netdevice(local->mdev);
893 ieee80211_rx_bss_list_deinit(local);
894 ieee80211_clear_tx_pending(local);
895 sta_info_stop(local);
896 rate_control_deinitialize(local);
897 debugfs_hw_del(local);
899 if (skb_queue_len(&local->skb_queue)
900 || skb_queue_len(&local->skb_queue_unreliable))
901 printk(KERN_WARNING "%s: skb_queue not empty\n",
902 wiphy_name(local->hw.wiphy));
903 skb_queue_purge(&local->skb_queue);
904 skb_queue_purge(&local->skb_queue_unreliable);
906 destroy_workqueue(local->hw.workqueue);
907 wiphy_unregister(local->hw.wiphy);
908 ieee80211_wep_free(local);
909 ieee80211_led_exit(local);
910 free_netdev(local->mdev);
912 EXPORT_SYMBOL(ieee80211_unregister_hw);
914 void ieee80211_free_hw(struct ieee80211_hw *hw)
916 struct ieee80211_local *local = hw_to_local(hw);
918 wiphy_free(local->hw.wiphy);
920 EXPORT_SYMBOL(ieee80211_free_hw);
922 static int __init ieee80211_init(void)
927 BUILD_BUG_ON(sizeof(struct ieee80211_tx_info) > sizeof(skb->cb));
928 BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, driver_data) +
929 IEEE80211_TX_INFO_DRIVER_DATA_SIZE > sizeof(skb->cb));
931 ret = rc80211_minstrel_init();
935 ret = rc80211_pid_init();
939 ieee80211_debugfs_netdev_init();
944 static void __exit ieee80211_exit(void)
947 rc80211_minstrel_exit();
950 * For key todo, it'll be empty by now but the work
951 * might still be scheduled.
953 flush_scheduled_work();
958 ieee80211_debugfs_netdev_exit();
962 subsys_initcall(ieee80211_init);
963 module_exit(ieee80211_exit);
965 MODULE_DESCRIPTION("IEEE 802.11 subsystem");
966 MODULE_LICENSE("GPL");