swiotlb: add is_swiotlb_buffer helper function
[safe/jmp/linux-2.6] / lib / swiotlb.c
1 /*
2  * Dynamic DMA mapping support.
3  *
4  * This implementation is a fallback for platforms that do not support
5  * I/O TLBs (aka DMA address translation hardware).
6  * Copyright (C) 2000 Asit Mallick <Asit.K.Mallick@intel.com>
7  * Copyright (C) 2000 Goutham Rao <goutham.rao@intel.com>
8  * Copyright (C) 2000, 2003 Hewlett-Packard Co
9  *      David Mosberger-Tang <davidm@hpl.hp.com>
10  *
11  * 03/05/07 davidm      Switch from PCI-DMA to generic device DMA API.
12  * 00/12/13 davidm      Rename to swiotlb.c and add mark_clean() to avoid
13  *                      unnecessary i-cache flushing.
14  * 04/07/.. ak          Better overflow handling. Assorted fixes.
15  * 05/09/10 linville    Add support for syncing ranges, support syncing for
16  *                      DMA_BIDIRECTIONAL mappings, miscellaneous cleanup.
17  */
18
19 #include <linux/cache.h>
20 #include <linux/dma-mapping.h>
21 #include <linux/mm.h>
22 #include <linux/module.h>
23 #include <linux/spinlock.h>
24 #include <linux/string.h>
25 #include <linux/types.h>
26 #include <linux/ctype.h>
27
28 #include <asm/io.h>
29 #include <asm/dma.h>
30 #include <asm/scatterlist.h>
31
32 #include <linux/init.h>
33 #include <linux/bootmem.h>
34 #include <linux/iommu-helper.h>
35
36 #define OFFSET(val,align) ((unsigned long)      \
37                            ( (val) & ( (align) - 1)))
38
39 #define SG_ENT_VIRT_ADDRESS(sg) (sg_virt((sg)))
40 #define SG_ENT_PHYS_ADDRESS(sg) virt_to_bus(SG_ENT_VIRT_ADDRESS(sg))
41
42 /*
43  * Maximum allowable number of contiguous slabs to map,
44  * must be a power of 2.  What is the appropriate value ?
45  * The complexity of {map,unmap}_single is linearly dependent on this value.
46  */
47 #define IO_TLB_SEGSIZE  128
48
49 /*
50  * log of the size of each IO TLB slab.  The number of slabs is command line
51  * controllable.
52  */
53 #define IO_TLB_SHIFT 11
54
55 #define SLABS_PER_PAGE (1 << (PAGE_SHIFT - IO_TLB_SHIFT))
56
57 /*
58  * Minimum IO TLB size to bother booting with.  Systems with mainly
59  * 64bit capable cards will only lightly use the swiotlb.  If we can't
60  * allocate a contiguous 1MB, we're probably in trouble anyway.
61  */
62 #define IO_TLB_MIN_SLABS ((1<<20) >> IO_TLB_SHIFT)
63
64 /*
65  * Enumeration for sync targets
66  */
67 enum dma_sync_target {
68         SYNC_FOR_CPU = 0,
69         SYNC_FOR_DEVICE = 1,
70 };
71
72 int swiotlb_force;
73
74 /*
75  * Used to do a quick range check in swiotlb_unmap_single and
76  * swiotlb_sync_single_*, to see if the memory was in fact allocated by this
77  * API.
78  */
79 static char *io_tlb_start, *io_tlb_end;
80
81 /*
82  * The number of IO TLB blocks (in groups of 64) betweeen io_tlb_start and
83  * io_tlb_end.  This is command line adjustable via setup_io_tlb_npages.
84  */
85 static unsigned long io_tlb_nslabs;
86
87 /*
88  * When the IOMMU overflows we return a fallback buffer. This sets the size.
89  */
90 static unsigned long io_tlb_overflow = 32*1024;
91
92 void *io_tlb_overflow_buffer;
93
94 /*
95  * This is a free list describing the number of free entries available from
96  * each index
97  */
98 static unsigned int *io_tlb_list;
99 static unsigned int io_tlb_index;
100
101 /*
102  * We need to save away the original address corresponding to a mapped entry
103  * for the sync operations.
104  */
105 static unsigned char **io_tlb_orig_addr;
106
107 /*
108  * Protect the above data structures in the map and unmap calls
109  */
110 static DEFINE_SPINLOCK(io_tlb_lock);
111
112 static int __init
113 setup_io_tlb_npages(char *str)
114 {
115         if (isdigit(*str)) {
116                 io_tlb_nslabs = simple_strtoul(str, &str, 0);
117                 /* avoid tail segment of size < IO_TLB_SEGSIZE */
118                 io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
119         }
120         if (*str == ',')
121                 ++str;
122         if (!strcmp(str, "force"))
123                 swiotlb_force = 1;
124         return 1;
125 }
126 __setup("swiotlb=", setup_io_tlb_npages);
127 /* make io_tlb_overflow tunable too? */
128
129 /*
130  * Statically reserve bounce buffer space and initialize bounce buffer data
131  * structures for the software IO TLB used to implement the DMA API.
132  */
133 void __init
134 swiotlb_init_with_default_size(size_t default_size)
135 {
136         unsigned long i, bytes;
137
138         if (!io_tlb_nslabs) {
139                 io_tlb_nslabs = (default_size >> IO_TLB_SHIFT);
140                 io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
141         }
142
143         bytes = io_tlb_nslabs << IO_TLB_SHIFT;
144
145         /*
146          * Get IO TLB memory from the low pages
147          */
148         io_tlb_start = alloc_bootmem_low_pages(bytes);
149         if (!io_tlb_start)
150                 panic("Cannot allocate SWIOTLB buffer");
151         io_tlb_end = io_tlb_start + bytes;
152
153         /*
154          * Allocate and initialize the free list array.  This array is used
155          * to find contiguous free memory regions of size up to IO_TLB_SEGSIZE
156          * between io_tlb_start and io_tlb_end.
157          */
158         io_tlb_list = alloc_bootmem(io_tlb_nslabs * sizeof(int));
159         for (i = 0; i < io_tlb_nslabs; i++)
160                 io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE);
161         io_tlb_index = 0;
162         io_tlb_orig_addr = alloc_bootmem(io_tlb_nslabs * sizeof(char *));
163
164         /*
165          * Get the overflow emergency buffer
166          */
167         io_tlb_overflow_buffer = alloc_bootmem_low(io_tlb_overflow);
168         if (!io_tlb_overflow_buffer)
169                 panic("Cannot allocate SWIOTLB overflow buffer!\n");
170
171         printk(KERN_INFO "Placing software IO TLB between 0x%lx - 0x%lx\n",
172                virt_to_bus(io_tlb_start), virt_to_bus(io_tlb_end));
173 }
174
175 void __init
176 swiotlb_init(void)
177 {
178         swiotlb_init_with_default_size(64 * (1<<20));   /* default to 64MB */
179 }
180
181 /*
182  * Systems with larger DMA zones (those that don't support ISA) can
183  * initialize the swiotlb later using the slab allocator if needed.
184  * This should be just like above, but with some error catching.
185  */
186 int
187 swiotlb_late_init_with_default_size(size_t default_size)
188 {
189         unsigned long i, bytes, req_nslabs = io_tlb_nslabs;
190         unsigned int order;
191
192         if (!io_tlb_nslabs) {
193                 io_tlb_nslabs = (default_size >> IO_TLB_SHIFT);
194                 io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
195         }
196
197         /*
198          * Get IO TLB memory from the low pages
199          */
200         order = get_order(io_tlb_nslabs << IO_TLB_SHIFT);
201         io_tlb_nslabs = SLABS_PER_PAGE << order;
202         bytes = io_tlb_nslabs << IO_TLB_SHIFT;
203
204         while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) {
205                 io_tlb_start = (char *)__get_free_pages(GFP_DMA | __GFP_NOWARN,
206                                                         order);
207                 if (io_tlb_start)
208                         break;
209                 order--;
210         }
211
212         if (!io_tlb_start)
213                 goto cleanup1;
214
215         if (order != get_order(bytes)) {
216                 printk(KERN_WARNING "Warning: only able to allocate %ld MB "
217                        "for software IO TLB\n", (PAGE_SIZE << order) >> 20);
218                 io_tlb_nslabs = SLABS_PER_PAGE << order;
219                 bytes = io_tlb_nslabs << IO_TLB_SHIFT;
220         }
221         io_tlb_end = io_tlb_start + bytes;
222         memset(io_tlb_start, 0, bytes);
223
224         /*
225          * Allocate and initialize the free list array.  This array is used
226          * to find contiguous free memory regions of size up to IO_TLB_SEGSIZE
227          * between io_tlb_start and io_tlb_end.
228          */
229         io_tlb_list = (unsigned int *)__get_free_pages(GFP_KERNEL,
230                                       get_order(io_tlb_nslabs * sizeof(int)));
231         if (!io_tlb_list)
232                 goto cleanup2;
233
234         for (i = 0; i < io_tlb_nslabs; i++)
235                 io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE);
236         io_tlb_index = 0;
237
238         io_tlb_orig_addr = (unsigned char **)__get_free_pages(GFP_KERNEL,
239                                    get_order(io_tlb_nslabs * sizeof(char *)));
240         if (!io_tlb_orig_addr)
241                 goto cleanup3;
242
243         memset(io_tlb_orig_addr, 0, io_tlb_nslabs * sizeof(char *));
244
245         /*
246          * Get the overflow emergency buffer
247          */
248         io_tlb_overflow_buffer = (void *)__get_free_pages(GFP_DMA,
249                                                   get_order(io_tlb_overflow));
250         if (!io_tlb_overflow_buffer)
251                 goto cleanup4;
252
253         printk(KERN_INFO "Placing %luMB software IO TLB between 0x%lx - "
254                "0x%lx\n", bytes >> 20,
255                virt_to_bus(io_tlb_start), virt_to_bus(io_tlb_end));
256
257         return 0;
258
259 cleanup4:
260         free_pages((unsigned long)io_tlb_orig_addr, get_order(io_tlb_nslabs *
261                                                               sizeof(char *)));
262         io_tlb_orig_addr = NULL;
263 cleanup3:
264         free_pages((unsigned long)io_tlb_list, get_order(io_tlb_nslabs *
265                                                          sizeof(int)));
266         io_tlb_list = NULL;
267 cleanup2:
268         io_tlb_end = NULL;
269         free_pages((unsigned long)io_tlb_start, order);
270         io_tlb_start = NULL;
271 cleanup1:
272         io_tlb_nslabs = req_nslabs;
273         return -ENOMEM;
274 }
275
276 static int
277 address_needs_mapping(struct device *hwdev, dma_addr_t addr)
278 {
279         dma_addr_t mask = 0xffffffff;
280         /* If the device has a mask, use it, otherwise default to 32 bits */
281         if (hwdev && hwdev->dma_mask)
282                 mask = *hwdev->dma_mask;
283         return (addr & ~mask) != 0;
284 }
285
286 static int is_swiotlb_buffer(char *addr)
287 {
288         return addr >= io_tlb_start && addr < io_tlb_end;
289 }
290
291 /*
292  * Allocates bounce buffer and returns its kernel virtual address.
293  */
294 static void *
295 map_single(struct device *hwdev, char *buffer, size_t size, int dir)
296 {
297         unsigned long flags;
298         char *dma_addr;
299         unsigned int nslots, stride, index, wrap;
300         int i;
301         unsigned long start_dma_addr;
302         unsigned long mask;
303         unsigned long offset_slots;
304         unsigned long max_slots;
305
306         mask = dma_get_seg_boundary(hwdev);
307         start_dma_addr = virt_to_bus(io_tlb_start) & mask;
308
309         offset_slots = ALIGN(start_dma_addr, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
310         max_slots = mask + 1
311                     ? ALIGN(mask + 1, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT
312                     : 1UL << (BITS_PER_LONG - IO_TLB_SHIFT);
313
314         /*
315          * For mappings greater than a page, we limit the stride (and
316          * hence alignment) to a page size.
317          */
318         nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
319         if (size > PAGE_SIZE)
320                 stride = (1 << (PAGE_SHIFT - IO_TLB_SHIFT));
321         else
322                 stride = 1;
323
324         BUG_ON(!nslots);
325
326         /*
327          * Find suitable number of IO TLB entries size that will fit this
328          * request and allocate a buffer from that IO TLB pool.
329          */
330         spin_lock_irqsave(&io_tlb_lock, flags);
331         index = ALIGN(io_tlb_index, stride);
332         if (index >= io_tlb_nslabs)
333                 index = 0;
334         wrap = index;
335
336         do {
337                 while (iommu_is_span_boundary(index, nslots, offset_slots,
338                                               max_slots)) {
339                         index += stride;
340                         if (index >= io_tlb_nslabs)
341                                 index = 0;
342                         if (index == wrap)
343                                 goto not_found;
344                 }
345
346                 /*
347                  * If we find a slot that indicates we have 'nslots' number of
348                  * contiguous buffers, we allocate the buffers from that slot
349                  * and mark the entries as '0' indicating unavailable.
350                  */
351                 if (io_tlb_list[index] >= nslots) {
352                         int count = 0;
353
354                         for (i = index; i < (int) (index + nslots); i++)
355                                 io_tlb_list[i] = 0;
356                         for (i = index - 1; (OFFSET(i, IO_TLB_SEGSIZE) != IO_TLB_SEGSIZE - 1) && io_tlb_list[i]; i--)
357                                 io_tlb_list[i] = ++count;
358                         dma_addr = io_tlb_start + (index << IO_TLB_SHIFT);
359
360                         /*
361                          * Update the indices to avoid searching in the next
362                          * round.
363                          */
364                         io_tlb_index = ((index + nslots) < io_tlb_nslabs
365                                         ? (index + nslots) : 0);
366
367                         goto found;
368                 }
369                 index += stride;
370                 if (index >= io_tlb_nslabs)
371                         index = 0;
372         } while (index != wrap);
373
374 not_found:
375         spin_unlock_irqrestore(&io_tlb_lock, flags);
376         return NULL;
377 found:
378         spin_unlock_irqrestore(&io_tlb_lock, flags);
379
380         /*
381          * Save away the mapping from the original address to the DMA address.
382          * This is needed when we sync the memory.  Then we sync the buffer if
383          * needed.
384          */
385         for (i = 0; i < nslots; i++)
386                 io_tlb_orig_addr[index+i] = buffer + (i << IO_TLB_SHIFT);
387         if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL)
388                 memcpy(dma_addr, buffer, size);
389
390         return dma_addr;
391 }
392
393 /*
394  * dma_addr is the kernel virtual address of the bounce buffer to unmap.
395  */
396 static void
397 unmap_single(struct device *hwdev, char *dma_addr, size_t size, int dir)
398 {
399         unsigned long flags;
400         int i, count, nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
401         int index = (dma_addr - io_tlb_start) >> IO_TLB_SHIFT;
402         char *buffer = io_tlb_orig_addr[index];
403
404         /*
405          * First, sync the memory before unmapping the entry
406          */
407         if (buffer && ((dir == DMA_FROM_DEVICE) || (dir == DMA_BIDIRECTIONAL)))
408                 /*
409                  * bounce... copy the data back into the original buffer * and
410                  * delete the bounce buffer.
411                  */
412                 memcpy(buffer, dma_addr, size);
413
414         /*
415          * Return the buffer to the free list by setting the corresponding
416          * entries to indicate the number of contigous entries available.
417          * While returning the entries to the free list, we merge the entries
418          * with slots below and above the pool being returned.
419          */
420         spin_lock_irqsave(&io_tlb_lock, flags);
421         {
422                 count = ((index + nslots) < ALIGN(index + 1, IO_TLB_SEGSIZE) ?
423                          io_tlb_list[index + nslots] : 0);
424                 /*
425                  * Step 1: return the slots to the free list, merging the
426                  * slots with superceeding slots
427                  */
428                 for (i = index + nslots - 1; i >= index; i--)
429                         io_tlb_list[i] = ++count;
430                 /*
431                  * Step 2: merge the returned slots with the preceding slots,
432                  * if available (non zero)
433                  */
434                 for (i = index - 1; (OFFSET(i, IO_TLB_SEGSIZE) != IO_TLB_SEGSIZE -1) && io_tlb_list[i]; i--)
435                         io_tlb_list[i] = ++count;
436         }
437         spin_unlock_irqrestore(&io_tlb_lock, flags);
438 }
439
440 static void
441 sync_single(struct device *hwdev, char *dma_addr, size_t size,
442             int dir, int target)
443 {
444         int index = (dma_addr - io_tlb_start) >> IO_TLB_SHIFT;
445         char *buffer = io_tlb_orig_addr[index];
446
447         buffer += ((unsigned long)dma_addr & ((1 << IO_TLB_SHIFT) - 1));
448
449         switch (target) {
450         case SYNC_FOR_CPU:
451                 if (likely(dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL))
452                         memcpy(buffer, dma_addr, size);
453                 else
454                         BUG_ON(dir != DMA_TO_DEVICE);
455                 break;
456         case SYNC_FOR_DEVICE:
457                 if (likely(dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL))
458                         memcpy(dma_addr, buffer, size);
459                 else
460                         BUG_ON(dir != DMA_FROM_DEVICE);
461                 break;
462         default:
463                 BUG();
464         }
465 }
466
467 void *
468 swiotlb_alloc_coherent(struct device *hwdev, size_t size,
469                        dma_addr_t *dma_handle, gfp_t flags)
470 {
471         dma_addr_t dev_addr;
472         void *ret;
473         int order = get_order(size);
474
475         ret = (void *)__get_free_pages(flags, order);
476         if (ret && address_needs_mapping(hwdev, virt_to_bus(ret))) {
477                 /*
478                  * The allocated memory isn't reachable by the device.
479                  * Fall back on swiotlb_map_single().
480                  */
481                 free_pages((unsigned long) ret, order);
482                 ret = NULL;
483         }
484         if (!ret) {
485                 /*
486                  * We are either out of memory or the device can't DMA
487                  * to GFP_DMA memory; fall back on
488                  * swiotlb_map_single(), which will grab memory from
489                  * the lowest available address range.
490                  */
491                 ret = map_single(hwdev, NULL, size, DMA_FROM_DEVICE);
492                 if (!ret)
493                         return NULL;
494         }
495
496         memset(ret, 0, size);
497         dev_addr = virt_to_bus(ret);
498
499         /* Confirm address can be DMA'd by device */
500         if (address_needs_mapping(hwdev, dev_addr)) {
501                 printk("hwdev DMA mask = 0x%016Lx, dev_addr = 0x%016Lx\n",
502                        (unsigned long long)*hwdev->dma_mask,
503                        (unsigned long long)dev_addr);
504                 panic("swiotlb_alloc_coherent: allocated memory is out of "
505                       "range for device");
506         }
507         *dma_handle = dev_addr;
508         return ret;
509 }
510
511 void
512 swiotlb_free_coherent(struct device *hwdev, size_t size, void *vaddr,
513                       dma_addr_t dma_handle)
514 {
515         WARN_ON(irqs_disabled());
516         if (!is_swiotlb_buffer(vaddr))
517                 free_pages((unsigned long) vaddr, get_order(size));
518         else
519                 /* DMA_TO_DEVICE to avoid memcpy in unmap_single */
520                 unmap_single(hwdev, vaddr, size, DMA_TO_DEVICE);
521 }
522
523 static void
524 swiotlb_full(struct device *dev, size_t size, int dir, int do_panic)
525 {
526         /*
527          * Ran out of IOMMU space for this operation. This is very bad.
528          * Unfortunately the drivers cannot handle this operation properly.
529          * unless they check for dma_mapping_error (most don't)
530          * When the mapping is small enough return a static buffer to limit
531          * the damage, or panic when the transfer is too big.
532          */
533         printk(KERN_ERR "DMA: Out of SW-IOMMU space for %zu bytes at "
534                "device %s\n", size, dev ? dev->bus_id : "?");
535
536         if (size > io_tlb_overflow && do_panic) {
537                 if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL)
538                         panic("DMA: Memory would be corrupted\n");
539                 if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL)
540                         panic("DMA: Random memory would be DMAed\n");
541         }
542 }
543
544 /*
545  * Map a single buffer of the indicated size for DMA in streaming mode.  The
546  * physical address to use is returned.
547  *
548  * Once the device is given the dma address, the device owns this memory until
549  * either swiotlb_unmap_single or swiotlb_dma_sync_single is performed.
550  */
551 dma_addr_t
552 swiotlb_map_single_attrs(struct device *hwdev, void *ptr, size_t size,
553                          int dir, struct dma_attrs *attrs)
554 {
555         dma_addr_t dev_addr = virt_to_bus(ptr);
556         void *map;
557
558         BUG_ON(dir == DMA_NONE);
559         /*
560          * If the pointer passed in happens to be in the device's DMA window,
561          * we can safely return the device addr and not worry about bounce
562          * buffering it.
563          */
564         if (!address_needs_mapping(hwdev, dev_addr) && !swiotlb_force)
565                 return dev_addr;
566
567         /*
568          * Oh well, have to allocate and map a bounce buffer.
569          */
570         map = map_single(hwdev, ptr, size, dir);
571         if (!map) {
572                 swiotlb_full(hwdev, size, dir, 1);
573                 map = io_tlb_overflow_buffer;
574         }
575
576         dev_addr = virt_to_bus(map);
577
578         /*
579          * Ensure that the address returned is DMA'ble
580          */
581         if (address_needs_mapping(hwdev, dev_addr))
582                 panic("map_single: bounce buffer is not DMA'ble");
583
584         return dev_addr;
585 }
586 EXPORT_SYMBOL(swiotlb_map_single_attrs);
587
588 dma_addr_t
589 swiotlb_map_single(struct device *hwdev, void *ptr, size_t size, int dir)
590 {
591         return swiotlb_map_single_attrs(hwdev, ptr, size, dir, NULL);
592 }
593
594 /*
595  * Unmap a single streaming mode DMA translation.  The dma_addr and size must
596  * match what was provided for in a previous swiotlb_map_single call.  All
597  * other usages are undefined.
598  *
599  * After this call, reads by the cpu to the buffer are guaranteed to see
600  * whatever the device wrote there.
601  */
602 void
603 swiotlb_unmap_single_attrs(struct device *hwdev, dma_addr_t dev_addr,
604                            size_t size, int dir, struct dma_attrs *attrs)
605 {
606         char *dma_addr = bus_to_virt(dev_addr);
607
608         BUG_ON(dir == DMA_NONE);
609         if (is_swiotlb_buffer(dma_addr))
610                 unmap_single(hwdev, dma_addr, size, dir);
611         else if (dir == DMA_FROM_DEVICE)
612                 dma_mark_clean(dma_addr, size);
613 }
614 EXPORT_SYMBOL(swiotlb_unmap_single_attrs);
615
616 void
617 swiotlb_unmap_single(struct device *hwdev, dma_addr_t dev_addr, size_t size,
618                      int dir)
619 {
620         return swiotlb_unmap_single_attrs(hwdev, dev_addr, size, dir, NULL);
621 }
622 /*
623  * Make physical memory consistent for a single streaming mode DMA translation
624  * after a transfer.
625  *
626  * If you perform a swiotlb_map_single() but wish to interrogate the buffer
627  * using the cpu, yet do not wish to teardown the dma mapping, you must
628  * call this function before doing so.  At the next point you give the dma
629  * address back to the card, you must first perform a
630  * swiotlb_dma_sync_for_device, and then the device again owns the buffer
631  */
632 static void
633 swiotlb_sync_single(struct device *hwdev, dma_addr_t dev_addr,
634                     size_t size, int dir, int target)
635 {
636         char *dma_addr = bus_to_virt(dev_addr);
637
638         BUG_ON(dir == DMA_NONE);
639         if (is_swiotlb_buffer(dma_addr))
640                 sync_single(hwdev, dma_addr, size, dir, target);
641         else if (dir == DMA_FROM_DEVICE)
642                 dma_mark_clean(dma_addr, size);
643 }
644
645 void
646 swiotlb_sync_single_for_cpu(struct device *hwdev, dma_addr_t dev_addr,
647                             size_t size, int dir)
648 {
649         swiotlb_sync_single(hwdev, dev_addr, size, dir, SYNC_FOR_CPU);
650 }
651
652 void
653 swiotlb_sync_single_for_device(struct device *hwdev, dma_addr_t dev_addr,
654                                size_t size, int dir)
655 {
656         swiotlb_sync_single(hwdev, dev_addr, size, dir, SYNC_FOR_DEVICE);
657 }
658
659 /*
660  * Same as above, but for a sub-range of the mapping.
661  */
662 static void
663 swiotlb_sync_single_range(struct device *hwdev, dma_addr_t dev_addr,
664                           unsigned long offset, size_t size,
665                           int dir, int target)
666 {
667         char *dma_addr = bus_to_virt(dev_addr) + offset;
668
669         BUG_ON(dir == DMA_NONE);
670         if (is_swiotlb_buffer(dma_addr))
671                 sync_single(hwdev, dma_addr, size, dir, target);
672         else if (dir == DMA_FROM_DEVICE)
673                 dma_mark_clean(dma_addr, size);
674 }
675
676 void
677 swiotlb_sync_single_range_for_cpu(struct device *hwdev, dma_addr_t dev_addr,
678                                   unsigned long offset, size_t size, int dir)
679 {
680         swiotlb_sync_single_range(hwdev, dev_addr, offset, size, dir,
681                                   SYNC_FOR_CPU);
682 }
683
684 void
685 swiotlb_sync_single_range_for_device(struct device *hwdev, dma_addr_t dev_addr,
686                                      unsigned long offset, size_t size, int dir)
687 {
688         swiotlb_sync_single_range(hwdev, dev_addr, offset, size, dir,
689                                   SYNC_FOR_DEVICE);
690 }
691
692 void swiotlb_unmap_sg_attrs(struct device *, struct scatterlist *, int, int,
693                             struct dma_attrs *);
694 /*
695  * Map a set of buffers described by scatterlist in streaming mode for DMA.
696  * This is the scatter-gather version of the above swiotlb_map_single
697  * interface.  Here the scatter gather list elements are each tagged with the
698  * appropriate dma address and length.  They are obtained via
699  * sg_dma_{address,length}(SG).
700  *
701  * NOTE: An implementation may be able to use a smaller number of
702  *       DMA address/length pairs than there are SG table elements.
703  *       (for example via virtual mapping capabilities)
704  *       The routine returns the number of addr/length pairs actually
705  *       used, at most nents.
706  *
707  * Device ownership issues as mentioned above for swiotlb_map_single are the
708  * same here.
709  */
710 int
711 swiotlb_map_sg_attrs(struct device *hwdev, struct scatterlist *sgl, int nelems,
712                      int dir, struct dma_attrs *attrs)
713 {
714         struct scatterlist *sg;
715         void *addr;
716         dma_addr_t dev_addr;
717         int i;
718
719         BUG_ON(dir == DMA_NONE);
720
721         for_each_sg(sgl, sg, nelems, i) {
722                 addr = SG_ENT_VIRT_ADDRESS(sg);
723                 dev_addr = virt_to_bus(addr);
724                 if (swiotlb_force || address_needs_mapping(hwdev, dev_addr)) {
725                         void *map = map_single(hwdev, addr, sg->length, dir);
726                         if (!map) {
727                                 /* Don't panic here, we expect map_sg users
728                                    to do proper error handling. */
729                                 swiotlb_full(hwdev, sg->length, dir, 0);
730                                 swiotlb_unmap_sg_attrs(hwdev, sgl, i, dir,
731                                                        attrs);
732                                 sgl[0].dma_length = 0;
733                                 return 0;
734                         }
735                         sg->dma_address = virt_to_bus(map);
736                 } else
737                         sg->dma_address = dev_addr;
738                 sg->dma_length = sg->length;
739         }
740         return nelems;
741 }
742 EXPORT_SYMBOL(swiotlb_map_sg_attrs);
743
744 int
745 swiotlb_map_sg(struct device *hwdev, struct scatterlist *sgl, int nelems,
746                int dir)
747 {
748         return swiotlb_map_sg_attrs(hwdev, sgl, nelems, dir, NULL);
749 }
750
751 /*
752  * Unmap a set of streaming mode DMA translations.  Again, cpu read rules
753  * concerning calls here are the same as for swiotlb_unmap_single() above.
754  */
755 void
756 swiotlb_unmap_sg_attrs(struct device *hwdev, struct scatterlist *sgl,
757                        int nelems, int dir, struct dma_attrs *attrs)
758 {
759         struct scatterlist *sg;
760         int i;
761
762         BUG_ON(dir == DMA_NONE);
763
764         for_each_sg(sgl, sg, nelems, i) {
765                 if (sg->dma_address != SG_ENT_PHYS_ADDRESS(sg))
766                         unmap_single(hwdev, bus_to_virt(sg->dma_address),
767                                      sg->dma_length, dir);
768                 else if (dir == DMA_FROM_DEVICE)
769                         dma_mark_clean(SG_ENT_VIRT_ADDRESS(sg), sg->dma_length);
770         }
771 }
772 EXPORT_SYMBOL(swiotlb_unmap_sg_attrs);
773
774 void
775 swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sgl, int nelems,
776                  int dir)
777 {
778         return swiotlb_unmap_sg_attrs(hwdev, sgl, nelems, dir, NULL);
779 }
780
781 /*
782  * Make physical memory consistent for a set of streaming mode DMA translations
783  * after a transfer.
784  *
785  * The same as swiotlb_sync_single_* but for a scatter-gather list, same rules
786  * and usage.
787  */
788 static void
789 swiotlb_sync_sg(struct device *hwdev, struct scatterlist *sgl,
790                 int nelems, int dir, int target)
791 {
792         struct scatterlist *sg;
793         int i;
794
795         BUG_ON(dir == DMA_NONE);
796
797         for_each_sg(sgl, sg, nelems, i) {
798                 if (sg->dma_address != SG_ENT_PHYS_ADDRESS(sg))
799                         sync_single(hwdev, bus_to_virt(sg->dma_address),
800                                     sg->dma_length, dir, target);
801                 else if (dir == DMA_FROM_DEVICE)
802                         dma_mark_clean(SG_ENT_VIRT_ADDRESS(sg), sg->dma_length);
803         }
804 }
805
806 void
807 swiotlb_sync_sg_for_cpu(struct device *hwdev, struct scatterlist *sg,
808                         int nelems, int dir)
809 {
810         swiotlb_sync_sg(hwdev, sg, nelems, dir, SYNC_FOR_CPU);
811 }
812
813 void
814 swiotlb_sync_sg_for_device(struct device *hwdev, struct scatterlist *sg,
815                            int nelems, int dir)
816 {
817         swiotlb_sync_sg(hwdev, sg, nelems, dir, SYNC_FOR_DEVICE);
818 }
819
820 int
821 swiotlb_dma_mapping_error(struct device *hwdev, dma_addr_t dma_addr)
822 {
823         return (dma_addr == virt_to_bus(io_tlb_overflow_buffer));
824 }
825
826 /*
827  * Return whether the given device DMA address mask can be supported
828  * properly.  For example, if your device can only drive the low 24-bits
829  * during bus mastering, then you would pass 0x00ffffff as the mask to
830  * this function.
831  */
832 int
833 swiotlb_dma_supported(struct device *hwdev, u64 mask)
834 {
835         return virt_to_bus(io_tlb_end - 1) <= mask;
836 }
837
838 EXPORT_SYMBOL(swiotlb_map_single);
839 EXPORT_SYMBOL(swiotlb_unmap_single);
840 EXPORT_SYMBOL(swiotlb_map_sg);
841 EXPORT_SYMBOL(swiotlb_unmap_sg);
842 EXPORT_SYMBOL(swiotlb_sync_single_for_cpu);
843 EXPORT_SYMBOL(swiotlb_sync_single_for_device);
844 EXPORT_SYMBOL_GPL(swiotlb_sync_single_range_for_cpu);
845 EXPORT_SYMBOL_GPL(swiotlb_sync_single_range_for_device);
846 EXPORT_SYMBOL(swiotlb_sync_sg_for_cpu);
847 EXPORT_SYMBOL(swiotlb_sync_sg_for_device);
848 EXPORT_SYMBOL(swiotlb_dma_mapping_error);
849 EXPORT_SYMBOL(swiotlb_alloc_coherent);
850 EXPORT_SYMBOL(swiotlb_free_coherent);
851 EXPORT_SYMBOL(swiotlb_dma_supported);