2 * linux/kernel/hrtimer.c
4 * Copyright(C) 2005-2006, Thomas Gleixner <tglx@linutronix.de>
5 * Copyright(C) 2005-2007, Red Hat, Inc., Ingo Molnar
6 * Copyright(C) 2006-2007 Timesys Corp., Thomas Gleixner
8 * High-resolution kernel timers
10 * In contrast to the low-resolution timeout API implemented in
11 * kernel/timer.c, hrtimers provide finer resolution and accuracy
12 * depending on system configuration and capabilities.
14 * These timers are currently used for:
18 * - precise in-kernel timing
20 * Started by: Thomas Gleixner and Ingo Molnar
23 * based on kernel/timer.c
25 * Help, testing, suggestions, bugfixes, improvements were
28 * George Anzinger, Andrew Morton, Steven Rostedt, Roman Zippel
31 * For licencing details see kernel-base/COPYING
34 #include <linux/cpu.h>
35 #include <linux/module.h>
36 #include <linux/percpu.h>
37 #include <linux/hrtimer.h>
38 #include <linux/notifier.h>
39 #include <linux/syscalls.h>
40 #include <linux/kallsyms.h>
41 #include <linux/interrupt.h>
42 #include <linux/tick.h>
43 #include <linux/seq_file.h>
44 #include <linux/err.h>
45 #include <linux/debugobjects.h>
46 #include <linux/sched.h>
47 #include <linux/timer.h>
49 #include <asm/uaccess.h>
51 #include <trace/events/timer.h>
56 * Note: If we want to add new timer bases, we have to skip the two
57 * clock ids captured by the cpu-timers. We do this by holding empty
58 * entries rather than doing math adjustment of the clock ids.
59 * This ensures that we capture erroneous accesses to these clock ids
60 * rather than moving them into the range of valid clock id's.
62 DEFINE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases) =
68 .index = CLOCK_REALTIME,
69 .get_time = &ktime_get_real,
70 .resolution = KTIME_LOW_RES,
73 .index = CLOCK_MONOTONIC,
74 .get_time = &ktime_get,
75 .resolution = KTIME_LOW_RES,
81 * Get the coarse grained time at the softirq based on xtime and
84 static void hrtimer_get_softirq_time(struct hrtimer_cpu_base *base)
87 struct timespec xts, tom;
91 seq = read_seqbegin(&xtime_lock);
92 xts = current_kernel_time();
93 tom = wall_to_monotonic;
94 } while (read_seqretry(&xtime_lock, seq));
96 xtim = timespec_to_ktime(xts);
97 tomono = timespec_to_ktime(tom);
98 base->clock_base[CLOCK_REALTIME].softirq_time = xtim;
99 base->clock_base[CLOCK_MONOTONIC].softirq_time =
100 ktime_add(xtim, tomono);
104 * Functions and macros which are different for UP/SMP systems are kept in a
110 * We are using hashed locking: holding per_cpu(hrtimer_bases)[n].lock
111 * means that all timers which are tied to this base via timer->base are
112 * locked, and the base itself is locked too.
114 * So __run_timers/migrate_timers can safely modify all timers which could
115 * be found on the lists/queues.
117 * When the timer's base is locked, and the timer removed from list, it is
118 * possible to set timer->base = NULL and drop the lock: the timer remains
122 struct hrtimer_clock_base *lock_hrtimer_base(const struct hrtimer *timer,
123 unsigned long *flags)
125 struct hrtimer_clock_base *base;
129 if (likely(base != NULL)) {
130 spin_lock_irqsave(&base->cpu_base->lock, *flags);
131 if (likely(base == timer->base))
133 /* The timer has migrated to another CPU: */
134 spin_unlock_irqrestore(&base->cpu_base->lock, *flags);
142 * Get the preferred target CPU for NOHZ
144 static int hrtimer_get_target(int this_cpu, int pinned)
147 if (!pinned && get_sysctl_timer_migration() && idle_cpu(this_cpu)) {
148 int preferred_cpu = get_nohz_load_balancer();
150 if (preferred_cpu >= 0)
151 return preferred_cpu;
158 * With HIGHRES=y we do not migrate the timer when it is expiring
159 * before the next event on the target cpu because we cannot reprogram
160 * the target cpu hardware and we would cause it to fire late.
162 * Called with cpu_base->lock of target cpu held.
165 hrtimer_check_target(struct hrtimer *timer, struct hrtimer_clock_base *new_base)
167 #ifdef CONFIG_HIGH_RES_TIMERS
170 if (!new_base->cpu_base->hres_active)
173 expires = ktime_sub(hrtimer_get_expires(timer), new_base->offset);
174 return expires.tv64 <= new_base->cpu_base->expires_next.tv64;
181 * Switch the timer base to the current CPU when possible.
183 static inline struct hrtimer_clock_base *
184 switch_hrtimer_base(struct hrtimer *timer, struct hrtimer_clock_base *base,
187 struct hrtimer_clock_base *new_base;
188 struct hrtimer_cpu_base *new_cpu_base;
189 int this_cpu = smp_processor_id();
190 int cpu = hrtimer_get_target(this_cpu, pinned);
193 new_cpu_base = &per_cpu(hrtimer_bases, cpu);
194 new_base = &new_cpu_base->clock_base[base->index];
196 if (base != new_base) {
198 * We are trying to move timer to new_base.
199 * However we can't change timer's base while it is running,
200 * so we keep it on the same CPU. No hassle vs. reprogramming
201 * the event source in the high resolution case. The softirq
202 * code will take care of this when the timer function has
203 * completed. There is no conflict as we hold the lock until
204 * the timer is enqueued.
206 if (unlikely(hrtimer_callback_running(timer)))
209 /* See the comment in lock_timer_base() */
211 spin_unlock(&base->cpu_base->lock);
212 spin_lock(&new_base->cpu_base->lock);
214 if (cpu != this_cpu && hrtimer_check_target(timer, new_base)) {
216 spin_unlock(&new_base->cpu_base->lock);
217 spin_lock(&base->cpu_base->lock);
221 timer->base = new_base;
226 #else /* CONFIG_SMP */
228 static inline struct hrtimer_clock_base *
229 lock_hrtimer_base(const struct hrtimer *timer, unsigned long *flags)
231 struct hrtimer_clock_base *base = timer->base;
233 spin_lock_irqsave(&base->cpu_base->lock, *flags);
238 # define switch_hrtimer_base(t, b, p) (b)
240 #endif /* !CONFIG_SMP */
243 * Functions for the union type storage format of ktime_t which are
244 * too large for inlining:
246 #if BITS_PER_LONG < 64
247 # ifndef CONFIG_KTIME_SCALAR
249 * ktime_add_ns - Add a scalar nanoseconds value to a ktime_t variable
251 * @nsec: the scalar nsec value to add
253 * Returns the sum of kt and nsec in ktime_t format
255 ktime_t ktime_add_ns(const ktime_t kt, u64 nsec)
259 if (likely(nsec < NSEC_PER_SEC)) {
262 unsigned long rem = do_div(nsec, NSEC_PER_SEC);
264 tmp = ktime_set((long)nsec, rem);
267 return ktime_add(kt, tmp);
270 EXPORT_SYMBOL_GPL(ktime_add_ns);
273 * ktime_sub_ns - Subtract a scalar nanoseconds value from a ktime_t variable
275 * @nsec: the scalar nsec value to subtract
277 * Returns the subtraction of @nsec from @kt in ktime_t format
279 ktime_t ktime_sub_ns(const ktime_t kt, u64 nsec)
283 if (likely(nsec < NSEC_PER_SEC)) {
286 unsigned long rem = do_div(nsec, NSEC_PER_SEC);
288 tmp = ktime_set((long)nsec, rem);
291 return ktime_sub(kt, tmp);
294 EXPORT_SYMBOL_GPL(ktime_sub_ns);
295 # endif /* !CONFIG_KTIME_SCALAR */
298 * Divide a ktime value by a nanosecond value
300 u64 ktime_divns(const ktime_t kt, s64 div)
305 dclc = ktime_to_ns(kt);
306 /* Make sure the divisor is less than 2^32: */
312 do_div(dclc, (unsigned long) div);
316 #endif /* BITS_PER_LONG >= 64 */
319 * Add two ktime values and do a safety check for overflow:
321 ktime_t ktime_add_safe(const ktime_t lhs, const ktime_t rhs)
323 ktime_t res = ktime_add(lhs, rhs);
326 * We use KTIME_SEC_MAX here, the maximum timeout which we can
327 * return to user space in a timespec:
329 if (res.tv64 < 0 || res.tv64 < lhs.tv64 || res.tv64 < rhs.tv64)
330 res = ktime_set(KTIME_SEC_MAX, 0);
335 EXPORT_SYMBOL_GPL(ktime_add_safe);
337 #ifdef CONFIG_DEBUG_OBJECTS_TIMERS
339 static struct debug_obj_descr hrtimer_debug_descr;
342 * fixup_init is called when:
343 * - an active object is initialized
345 static int hrtimer_fixup_init(void *addr, enum debug_obj_state state)
347 struct hrtimer *timer = addr;
350 case ODEBUG_STATE_ACTIVE:
351 hrtimer_cancel(timer);
352 debug_object_init(timer, &hrtimer_debug_descr);
360 * fixup_activate is called when:
361 * - an active object is activated
362 * - an unknown object is activated (might be a statically initialized object)
364 static int hrtimer_fixup_activate(void *addr, enum debug_obj_state state)
368 case ODEBUG_STATE_NOTAVAILABLE:
372 case ODEBUG_STATE_ACTIVE:
381 * fixup_free is called when:
382 * - an active object is freed
384 static int hrtimer_fixup_free(void *addr, enum debug_obj_state state)
386 struct hrtimer *timer = addr;
389 case ODEBUG_STATE_ACTIVE:
390 hrtimer_cancel(timer);
391 debug_object_free(timer, &hrtimer_debug_descr);
398 static struct debug_obj_descr hrtimer_debug_descr = {
400 .fixup_init = hrtimer_fixup_init,
401 .fixup_activate = hrtimer_fixup_activate,
402 .fixup_free = hrtimer_fixup_free,
405 static inline void debug_hrtimer_init(struct hrtimer *timer)
407 debug_object_init(timer, &hrtimer_debug_descr);
410 static inline void debug_hrtimer_activate(struct hrtimer *timer)
412 debug_object_activate(timer, &hrtimer_debug_descr);
415 static inline void debug_hrtimer_deactivate(struct hrtimer *timer)
417 debug_object_deactivate(timer, &hrtimer_debug_descr);
420 static inline void debug_hrtimer_free(struct hrtimer *timer)
422 debug_object_free(timer, &hrtimer_debug_descr);
425 static void __hrtimer_init(struct hrtimer *timer, clockid_t clock_id,
426 enum hrtimer_mode mode);
428 void hrtimer_init_on_stack(struct hrtimer *timer, clockid_t clock_id,
429 enum hrtimer_mode mode)
431 debug_object_init_on_stack(timer, &hrtimer_debug_descr);
432 __hrtimer_init(timer, clock_id, mode);
434 EXPORT_SYMBOL_GPL(hrtimer_init_on_stack);
436 void destroy_hrtimer_on_stack(struct hrtimer *timer)
438 debug_object_free(timer, &hrtimer_debug_descr);
442 static inline void debug_hrtimer_init(struct hrtimer *timer) { }
443 static inline void debug_hrtimer_activate(struct hrtimer *timer) { }
444 static inline void debug_hrtimer_deactivate(struct hrtimer *timer) { }
448 debug_init(struct hrtimer *timer, clockid_t clockid,
449 enum hrtimer_mode mode)
451 debug_hrtimer_init(timer);
452 trace_hrtimer_init(timer, clockid, mode);
455 static inline void debug_activate(struct hrtimer *timer)
457 debug_hrtimer_activate(timer);
458 trace_hrtimer_start(timer);
461 static inline void debug_deactivate(struct hrtimer *timer)
463 debug_hrtimer_deactivate(timer);
464 trace_hrtimer_cancel(timer);
467 /* High resolution timer related functions */
468 #ifdef CONFIG_HIGH_RES_TIMERS
471 * High resolution timer enabled ?
473 static int hrtimer_hres_enabled __read_mostly = 1;
476 * Enable / Disable high resolution mode
478 static int __init setup_hrtimer_hres(char *str)
480 if (!strcmp(str, "off"))
481 hrtimer_hres_enabled = 0;
482 else if (!strcmp(str, "on"))
483 hrtimer_hres_enabled = 1;
489 __setup("highres=", setup_hrtimer_hres);
492 * hrtimer_high_res_enabled - query, if the highres mode is enabled
494 static inline int hrtimer_is_hres_enabled(void)
496 return hrtimer_hres_enabled;
500 * Is the high resolution mode active ?
502 static inline int hrtimer_hres_active(void)
504 return __get_cpu_var(hrtimer_bases).hres_active;
508 * Reprogram the event source with checking both queues for the
510 * Called with interrupts disabled and base->lock held
513 hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base, int skip_equal)
516 struct hrtimer_clock_base *base = cpu_base->clock_base;
517 ktime_t expires, expires_next;
519 expires_next.tv64 = KTIME_MAX;
521 for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++, base++) {
522 struct hrtimer *timer;
526 timer = rb_entry(base->first, struct hrtimer, node);
527 expires = ktime_sub(hrtimer_get_expires(timer), base->offset);
529 * clock_was_set() has changed base->offset so the
530 * result might be negative. Fix it up to prevent a
531 * false positive in clockevents_program_event()
533 if (expires.tv64 < 0)
535 if (expires.tv64 < expires_next.tv64)
536 expires_next = expires;
539 if (skip_equal && expires_next.tv64 == cpu_base->expires_next.tv64)
542 cpu_base->expires_next.tv64 = expires_next.tv64;
544 if (cpu_base->expires_next.tv64 != KTIME_MAX)
545 tick_program_event(cpu_base->expires_next, 1);
549 * Shared reprogramming for clock_realtime and clock_monotonic
551 * When a timer is enqueued and expires earlier than the already enqueued
552 * timers, we have to check, whether it expires earlier than the timer for
553 * which the clock event device was armed.
555 * Called with interrupts disabled and base->cpu_base.lock held
557 static int hrtimer_reprogram(struct hrtimer *timer,
558 struct hrtimer_clock_base *base)
560 ktime_t *expires_next = &__get_cpu_var(hrtimer_bases).expires_next;
561 ktime_t expires = ktime_sub(hrtimer_get_expires(timer), base->offset);
564 WARN_ON_ONCE(hrtimer_get_expires_tv64(timer) < 0);
567 * When the callback is running, we do not reprogram the clock event
568 * device. The timer callback is either running on a different CPU or
569 * the callback is executed in the hrtimer_interrupt context. The
570 * reprogramming is handled either by the softirq, which called the
571 * callback or at the end of the hrtimer_interrupt.
573 if (hrtimer_callback_running(timer))
577 * CLOCK_REALTIME timer might be requested with an absolute
578 * expiry time which is less than base->offset. Nothing wrong
579 * about that, just avoid to call into the tick code, which
580 * has now objections against negative expiry values.
582 if (expires.tv64 < 0)
585 if (expires.tv64 >= expires_next->tv64)
589 * Clockevents returns -ETIME, when the event was in the past.
591 res = tick_program_event(expires, 0);
592 if (!IS_ERR_VALUE(res))
593 *expires_next = expires;
599 * Retrigger next event is called after clock was set
601 * Called with interrupts disabled via on_each_cpu()
603 static void retrigger_next_event(void *arg)
605 struct hrtimer_cpu_base *base;
606 struct timespec realtime_offset;
609 if (!hrtimer_hres_active())
613 seq = read_seqbegin(&xtime_lock);
614 set_normalized_timespec(&realtime_offset,
615 -wall_to_monotonic.tv_sec,
616 -wall_to_monotonic.tv_nsec);
617 } while (read_seqretry(&xtime_lock, seq));
619 base = &__get_cpu_var(hrtimer_bases);
621 /* Adjust CLOCK_REALTIME offset */
622 spin_lock(&base->lock);
623 base->clock_base[CLOCK_REALTIME].offset =
624 timespec_to_ktime(realtime_offset);
626 hrtimer_force_reprogram(base, 0);
627 spin_unlock(&base->lock);
631 * Clock realtime was set
633 * Change the offset of the realtime clock vs. the monotonic
636 * We might have to reprogram the high resolution timer interrupt. On
637 * SMP we call the architecture specific code to retrigger _all_ high
638 * resolution timer interrupts. On UP we just disable interrupts and
639 * call the high resolution interrupt code.
641 void clock_was_set(void)
643 /* Retrigger the CPU local events everywhere */
644 on_each_cpu(retrigger_next_event, NULL, 1);
648 * During resume we might have to reprogram the high resolution timer
649 * interrupt (on the local CPU):
651 void hres_timers_resume(void)
653 WARN_ONCE(!irqs_disabled(),
654 KERN_INFO "hres_timers_resume() called with IRQs enabled!");
656 retrigger_next_event(NULL);
660 * Initialize the high resolution related parts of cpu_base
662 static inline void hrtimer_init_hres(struct hrtimer_cpu_base *base)
664 base->expires_next.tv64 = KTIME_MAX;
665 base->hres_active = 0;
669 * Initialize the high resolution related parts of a hrtimer
671 static inline void hrtimer_init_timer_hres(struct hrtimer *timer)
677 * When High resolution timers are active, try to reprogram. Note, that in case
678 * the state has HRTIMER_STATE_CALLBACK set, no reprogramming and no expiry
679 * check happens. The timer gets enqueued into the rbtree. The reprogramming
680 * and expiry check is done in the hrtimer_interrupt or in the softirq.
682 static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer,
683 struct hrtimer_clock_base *base,
686 if (base->cpu_base->hres_active && hrtimer_reprogram(timer, base)) {
688 spin_unlock(&base->cpu_base->lock);
689 raise_softirq_irqoff(HRTIMER_SOFTIRQ);
690 spin_lock(&base->cpu_base->lock);
692 __raise_softirq_irqoff(HRTIMER_SOFTIRQ);
701 * Switch to high resolution mode
703 static int hrtimer_switch_to_hres(void)
705 int cpu = smp_processor_id();
706 struct hrtimer_cpu_base *base = &per_cpu(hrtimer_bases, cpu);
709 if (base->hres_active)
712 local_irq_save(flags);
714 if (tick_init_highres()) {
715 local_irq_restore(flags);
716 printk(KERN_WARNING "Could not switch to high resolution "
717 "mode on CPU %d\n", cpu);
720 base->hres_active = 1;
721 base->clock_base[CLOCK_REALTIME].resolution = KTIME_HIGH_RES;
722 base->clock_base[CLOCK_MONOTONIC].resolution = KTIME_HIGH_RES;
724 tick_setup_sched_timer();
726 /* "Retrigger" the interrupt to get things going */
727 retrigger_next_event(NULL);
728 local_irq_restore(flags);
729 printk(KERN_DEBUG "Switched to high resolution mode on CPU %d\n",
736 static inline int hrtimer_hres_active(void) { return 0; }
737 static inline int hrtimer_is_hres_enabled(void) { return 0; }
738 static inline int hrtimer_switch_to_hres(void) { return 0; }
740 hrtimer_force_reprogram(struct hrtimer_cpu_base *base, int skip_equal) { }
741 static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer,
742 struct hrtimer_clock_base *base,
747 static inline void hrtimer_init_hres(struct hrtimer_cpu_base *base) { }
748 static inline void hrtimer_init_timer_hres(struct hrtimer *timer) { }
750 #endif /* CONFIG_HIGH_RES_TIMERS */
752 #ifdef CONFIG_TIMER_STATS
753 void __timer_stats_hrtimer_set_start_info(struct hrtimer *timer, void *addr)
755 if (timer->start_site)
758 timer->start_site = addr;
759 memcpy(timer->start_comm, current->comm, TASK_COMM_LEN);
760 timer->start_pid = current->pid;
765 * Counterpart to lock_hrtimer_base above:
768 void unlock_hrtimer_base(const struct hrtimer *timer, unsigned long *flags)
770 spin_unlock_irqrestore(&timer->base->cpu_base->lock, *flags);
774 * hrtimer_forward - forward the timer expiry
775 * @timer: hrtimer to forward
776 * @now: forward past this time
777 * @interval: the interval to forward
779 * Forward the timer expiry so it will expire in the future.
780 * Returns the number of overruns.
782 u64 hrtimer_forward(struct hrtimer *timer, ktime_t now, ktime_t interval)
787 delta = ktime_sub(now, hrtimer_get_expires(timer));
792 if (interval.tv64 < timer->base->resolution.tv64)
793 interval.tv64 = timer->base->resolution.tv64;
795 if (unlikely(delta.tv64 >= interval.tv64)) {
796 s64 incr = ktime_to_ns(interval);
798 orun = ktime_divns(delta, incr);
799 hrtimer_add_expires_ns(timer, incr * orun);
800 if (hrtimer_get_expires_tv64(timer) > now.tv64)
803 * This (and the ktime_add() below) is the
804 * correction for exact:
808 hrtimer_add_expires(timer, interval);
812 EXPORT_SYMBOL_GPL(hrtimer_forward);
815 * enqueue_hrtimer - internal function to (re)start a timer
817 * The timer is inserted in expiry order. Insertion into the
818 * red black tree is O(log(n)). Must hold the base lock.
820 * Returns 1 when the new timer is the leftmost timer in the tree.
822 static int enqueue_hrtimer(struct hrtimer *timer,
823 struct hrtimer_clock_base *base)
825 struct rb_node **link = &base->active.rb_node;
826 struct rb_node *parent = NULL;
827 struct hrtimer *entry;
830 debug_activate(timer);
833 * Find the right place in the rbtree:
837 entry = rb_entry(parent, struct hrtimer, node);
839 * We dont care about collisions. Nodes with
840 * the same expiry time stay together.
842 if (hrtimer_get_expires_tv64(timer) <
843 hrtimer_get_expires_tv64(entry)) {
844 link = &(*link)->rb_left;
846 link = &(*link)->rb_right;
852 * Insert the timer to the rbtree and check whether it
853 * replaces the first pending timer
856 base->first = &timer->node;
858 rb_link_node(&timer->node, parent, link);
859 rb_insert_color(&timer->node, &base->active);
861 * HRTIMER_STATE_ENQUEUED is or'ed to the current state to preserve the
862 * state of a possibly running callback.
864 timer->state |= HRTIMER_STATE_ENQUEUED;
870 * __remove_hrtimer - internal function to remove a timer
872 * Caller must hold the base lock.
874 * High resolution timer mode reprograms the clock event device when the
875 * timer is the one which expires next. The caller can disable this by setting
876 * reprogram to zero. This is useful, when the context does a reprogramming
877 * anyway (e.g. timer interrupt)
879 static void __remove_hrtimer(struct hrtimer *timer,
880 struct hrtimer_clock_base *base,
881 unsigned long newstate, int reprogram)
883 if (!(timer->state & HRTIMER_STATE_ENQUEUED))
887 * Remove the timer from the rbtree and replace the first
888 * entry pointer if necessary.
890 if (base->first == &timer->node) {
891 base->first = rb_next(&timer->node);
892 #ifdef CONFIG_HIGH_RES_TIMERS
893 /* Reprogram the clock event device. if enabled */
894 if (reprogram && hrtimer_hres_active()) {
897 expires = ktime_sub(hrtimer_get_expires(timer),
899 if (base->cpu_base->expires_next.tv64 == expires.tv64)
900 hrtimer_force_reprogram(base->cpu_base, 1);
904 rb_erase(&timer->node, &base->active);
906 timer->state = newstate;
910 * remove hrtimer, called with base lock held
913 remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base)
915 if (hrtimer_is_queued(timer)) {
919 * Remove the timer and force reprogramming when high
920 * resolution mode is active and the timer is on the current
921 * CPU. If we remove a timer on another CPU, reprogramming is
922 * skipped. The interrupt event on this CPU is fired and
923 * reprogramming happens in the interrupt handler. This is a
924 * rare case and less expensive than a smp call.
926 debug_deactivate(timer);
927 timer_stats_hrtimer_clear_start_info(timer);
928 reprogram = base->cpu_base == &__get_cpu_var(hrtimer_bases);
929 __remove_hrtimer(timer, base, HRTIMER_STATE_INACTIVE,
936 int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
937 unsigned long delta_ns, const enum hrtimer_mode mode,
940 struct hrtimer_clock_base *base, *new_base;
944 base = lock_hrtimer_base(timer, &flags);
946 /* Remove an active timer from the queue: */
947 ret = remove_hrtimer(timer, base);
949 /* Switch the timer base, if necessary: */
950 new_base = switch_hrtimer_base(timer, base, mode & HRTIMER_MODE_PINNED);
952 if (mode & HRTIMER_MODE_REL) {
953 tim = ktime_add_safe(tim, new_base->get_time());
955 * CONFIG_TIME_LOW_RES is a temporary way for architectures
956 * to signal that they simply return xtime in
957 * do_gettimeoffset(). In this case we want to round up by
958 * resolution when starting a relative timer, to avoid short
959 * timeouts. This will go away with the GTOD framework.
961 #ifdef CONFIG_TIME_LOW_RES
962 tim = ktime_add_safe(tim, base->resolution);
966 hrtimer_set_expires_range_ns(timer, tim, delta_ns);
968 timer_stats_hrtimer_set_start_info(timer);
970 leftmost = enqueue_hrtimer(timer, new_base);
973 * Only allow reprogramming if the new base is on this CPU.
974 * (it might still be on another CPU if the timer was pending)
976 * XXX send_remote_softirq() ?
978 if (leftmost && new_base->cpu_base == &__get_cpu_var(hrtimer_bases))
979 hrtimer_enqueue_reprogram(timer, new_base, wakeup);
981 unlock_hrtimer_base(timer, &flags);
987 * hrtimer_start_range_ns - (re)start an hrtimer on the current CPU
988 * @timer: the timer to be added
990 * @delta_ns: "slack" range for the timer
991 * @mode: expiry mode: absolute (HRTIMER_ABS) or relative (HRTIMER_REL)
995 * 1 when the timer was active
997 int hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
998 unsigned long delta_ns, const enum hrtimer_mode mode)
1000 return __hrtimer_start_range_ns(timer, tim, delta_ns, mode, 1);
1002 EXPORT_SYMBOL_GPL(hrtimer_start_range_ns);
1005 * hrtimer_start - (re)start an hrtimer on the current CPU
1006 * @timer: the timer to be added
1008 * @mode: expiry mode: absolute (HRTIMER_ABS) or relative (HRTIMER_REL)
1012 * 1 when the timer was active
1015 hrtimer_start(struct hrtimer *timer, ktime_t tim, const enum hrtimer_mode mode)
1017 return __hrtimer_start_range_ns(timer, tim, 0, mode, 1);
1019 EXPORT_SYMBOL_GPL(hrtimer_start);
1023 * hrtimer_try_to_cancel - try to deactivate a timer
1024 * @timer: hrtimer to stop
1027 * 0 when the timer was not active
1028 * 1 when the timer was active
1029 * -1 when the timer is currently excuting the callback function and
1032 int hrtimer_try_to_cancel(struct hrtimer *timer)
1034 struct hrtimer_clock_base *base;
1035 unsigned long flags;
1038 base = lock_hrtimer_base(timer, &flags);
1040 if (!hrtimer_callback_running(timer))
1041 ret = remove_hrtimer(timer, base);
1043 unlock_hrtimer_base(timer, &flags);
1048 EXPORT_SYMBOL_GPL(hrtimer_try_to_cancel);
1051 * hrtimer_cancel - cancel a timer and wait for the handler to finish.
1052 * @timer: the timer to be cancelled
1055 * 0 when the timer was not active
1056 * 1 when the timer was active
1058 int hrtimer_cancel(struct hrtimer *timer)
1061 int ret = hrtimer_try_to_cancel(timer);
1068 EXPORT_SYMBOL_GPL(hrtimer_cancel);
1071 * hrtimer_get_remaining - get remaining time for the timer
1072 * @timer: the timer to read
1074 ktime_t hrtimer_get_remaining(const struct hrtimer *timer)
1076 struct hrtimer_clock_base *base;
1077 unsigned long flags;
1080 base = lock_hrtimer_base(timer, &flags);
1081 rem = hrtimer_expires_remaining(timer);
1082 unlock_hrtimer_base(timer, &flags);
1086 EXPORT_SYMBOL_GPL(hrtimer_get_remaining);
1090 * hrtimer_get_next_event - get the time until next expiry event
1092 * Returns the delta to the next expiry event or KTIME_MAX if no timer
1095 ktime_t hrtimer_get_next_event(void)
1097 struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
1098 struct hrtimer_clock_base *base = cpu_base->clock_base;
1099 ktime_t delta, mindelta = { .tv64 = KTIME_MAX };
1100 unsigned long flags;
1103 spin_lock_irqsave(&cpu_base->lock, flags);
1105 if (!hrtimer_hres_active()) {
1106 for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++, base++) {
1107 struct hrtimer *timer;
1112 timer = rb_entry(base->first, struct hrtimer, node);
1113 delta.tv64 = hrtimer_get_expires_tv64(timer);
1114 delta = ktime_sub(delta, base->get_time());
1115 if (delta.tv64 < mindelta.tv64)
1116 mindelta.tv64 = delta.tv64;
1120 spin_unlock_irqrestore(&cpu_base->lock, flags);
1122 if (mindelta.tv64 < 0)
1128 static void __hrtimer_init(struct hrtimer *timer, clockid_t clock_id,
1129 enum hrtimer_mode mode)
1131 struct hrtimer_cpu_base *cpu_base;
1133 memset(timer, 0, sizeof(struct hrtimer));
1135 cpu_base = &__raw_get_cpu_var(hrtimer_bases);
1137 if (clock_id == CLOCK_REALTIME && mode != HRTIMER_MODE_ABS)
1138 clock_id = CLOCK_MONOTONIC;
1140 timer->base = &cpu_base->clock_base[clock_id];
1141 hrtimer_init_timer_hres(timer);
1143 #ifdef CONFIG_TIMER_STATS
1144 timer->start_site = NULL;
1145 timer->start_pid = -1;
1146 memset(timer->start_comm, 0, TASK_COMM_LEN);
1151 * hrtimer_init - initialize a timer to the given clock
1152 * @timer: the timer to be initialized
1153 * @clock_id: the clock to be used
1154 * @mode: timer mode abs/rel
1156 void hrtimer_init(struct hrtimer *timer, clockid_t clock_id,
1157 enum hrtimer_mode mode)
1159 debug_init(timer, clock_id, mode);
1160 __hrtimer_init(timer, clock_id, mode);
1162 EXPORT_SYMBOL_GPL(hrtimer_init);
1165 * hrtimer_get_res - get the timer resolution for a clock
1166 * @which_clock: which clock to query
1167 * @tp: pointer to timespec variable to store the resolution
1169 * Store the resolution of the clock selected by @which_clock in the
1170 * variable pointed to by @tp.
1172 int hrtimer_get_res(const clockid_t which_clock, struct timespec *tp)
1174 struct hrtimer_cpu_base *cpu_base;
1176 cpu_base = &__raw_get_cpu_var(hrtimer_bases);
1177 *tp = ktime_to_timespec(cpu_base->clock_base[which_clock].resolution);
1181 EXPORT_SYMBOL_GPL(hrtimer_get_res);
1183 static void __run_hrtimer(struct hrtimer *timer, ktime_t *now)
1185 struct hrtimer_clock_base *base = timer->base;
1186 struct hrtimer_cpu_base *cpu_base = base->cpu_base;
1187 enum hrtimer_restart (*fn)(struct hrtimer *);
1190 WARN_ON(!irqs_disabled());
1192 debug_deactivate(timer);
1193 __remove_hrtimer(timer, base, HRTIMER_STATE_CALLBACK, 0);
1194 timer_stats_account_hrtimer(timer);
1195 fn = timer->function;
1198 * Because we run timers from hardirq context, there is no chance
1199 * they get migrated to another cpu, therefore its safe to unlock
1202 spin_unlock(&cpu_base->lock);
1203 trace_hrtimer_expire_entry(timer, now);
1204 restart = fn(timer);
1205 trace_hrtimer_expire_exit(timer);
1206 spin_lock(&cpu_base->lock);
1209 * Note: We clear the CALLBACK bit after enqueue_hrtimer and
1210 * we do not reprogramm the event hardware. Happens either in
1211 * hrtimer_start_range_ns() or in hrtimer_interrupt()
1213 if (restart != HRTIMER_NORESTART) {
1214 BUG_ON(timer->state != HRTIMER_STATE_CALLBACK);
1215 enqueue_hrtimer(timer, base);
1217 timer->state &= ~HRTIMER_STATE_CALLBACK;
1220 #ifdef CONFIG_HIGH_RES_TIMERS
1222 static int force_clock_reprogram;
1225 * After 5 iteration's attempts, we consider that hrtimer_interrupt()
1226 * is hanging, which could happen with something that slows the interrupt
1227 * such as the tracing. Then we force the clock reprogramming for each future
1228 * hrtimer interrupts to avoid infinite loops and use the min_delta_ns
1229 * threshold that we will overwrite.
1230 * The next tick event will be scheduled to 3 times we currently spend on
1231 * hrtimer_interrupt(). This gives a good compromise, the cpus will spend
1232 * 1/4 of their time to process the hrtimer interrupts. This is enough to
1233 * let it running without serious starvation.
1237 hrtimer_interrupt_hanging(struct clock_event_device *dev,
1240 force_clock_reprogram = 1;
1241 dev->min_delta_ns = (unsigned long)try_time.tv64 * 3;
1242 printk(KERN_WARNING "hrtimer: interrupt too slow, "
1243 "forcing clock min delta to %llu ns\n",
1244 (unsigned long long) dev->min_delta_ns);
1247 * High resolution timer interrupt
1248 * Called with interrupts disabled
1250 void hrtimer_interrupt(struct clock_event_device *dev)
1252 struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
1253 struct hrtimer_clock_base *base;
1254 ktime_t expires_next, now;
1258 BUG_ON(!cpu_base->hres_active);
1259 cpu_base->nr_events++;
1260 dev->next_event.tv64 = KTIME_MAX;
1263 /* 5 retries is enough to notice a hang */
1264 if (!(++nr_retries % 5))
1265 hrtimer_interrupt_hanging(dev, ktime_sub(ktime_get(), now));
1269 expires_next.tv64 = KTIME_MAX;
1271 spin_lock(&cpu_base->lock);
1273 * We set expires_next to KTIME_MAX here with cpu_base->lock
1274 * held to prevent that a timer is enqueued in our queue via
1275 * the migration code. This does not affect enqueueing of
1276 * timers which run their callback and need to be requeued on
1279 cpu_base->expires_next.tv64 = KTIME_MAX;
1281 base = cpu_base->clock_base;
1283 for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
1285 struct rb_node *node;
1287 basenow = ktime_add(now, base->offset);
1289 while ((node = base->first)) {
1290 struct hrtimer *timer;
1292 timer = rb_entry(node, struct hrtimer, node);
1295 * The immediate goal for using the softexpires is
1296 * minimizing wakeups, not running timers at the
1297 * earliest interrupt after their soft expiration.
1298 * This allows us to avoid using a Priority Search
1299 * Tree, which can answer a stabbing querry for
1300 * overlapping intervals and instead use the simple
1301 * BST we already have.
1302 * We don't add extra wakeups by delaying timers that
1303 * are right-of a not yet expired timer, because that
1304 * timer will have to trigger a wakeup anyway.
1307 if (basenow.tv64 < hrtimer_get_softexpires_tv64(timer)) {
1310 expires = ktime_sub(hrtimer_get_expires(timer),
1312 if (expires.tv64 < expires_next.tv64)
1313 expires_next = expires;
1317 __run_hrtimer(timer, &basenow);
1323 * Store the new expiry value so the migration code can verify
1326 cpu_base->expires_next = expires_next;
1327 spin_unlock(&cpu_base->lock);
1329 /* Reprogramming necessary ? */
1330 if (expires_next.tv64 != KTIME_MAX) {
1331 if (tick_program_event(expires_next, force_clock_reprogram))
1337 * local version of hrtimer_peek_ahead_timers() called with interrupts
1340 static void __hrtimer_peek_ahead_timers(void)
1342 struct tick_device *td;
1344 if (!hrtimer_hres_active())
1347 td = &__get_cpu_var(tick_cpu_device);
1348 if (td && td->evtdev)
1349 hrtimer_interrupt(td->evtdev);
1353 * hrtimer_peek_ahead_timers -- run soft-expired timers now
1355 * hrtimer_peek_ahead_timers will peek at the timer queue of
1356 * the current cpu and check if there are any timers for which
1357 * the soft expires time has passed. If any such timers exist,
1358 * they are run immediately and then removed from the timer queue.
1361 void hrtimer_peek_ahead_timers(void)
1363 unsigned long flags;
1365 local_irq_save(flags);
1366 __hrtimer_peek_ahead_timers();
1367 local_irq_restore(flags);
1370 static void run_hrtimer_softirq(struct softirq_action *h)
1372 hrtimer_peek_ahead_timers();
1375 #else /* CONFIG_HIGH_RES_TIMERS */
1377 static inline void __hrtimer_peek_ahead_timers(void) { }
1379 #endif /* !CONFIG_HIGH_RES_TIMERS */
1382 * Called from timer softirq every jiffy, expire hrtimers:
1384 * For HRT its the fall back code to run the softirq in the timer
1385 * softirq context in case the hrtimer initialization failed or has
1386 * not been done yet.
1388 void hrtimer_run_pending(void)
1390 if (hrtimer_hres_active())
1394 * This _is_ ugly: We have to check in the softirq context,
1395 * whether we can switch to highres and / or nohz mode. The
1396 * clocksource switch happens in the timer interrupt with
1397 * xtime_lock held. Notification from there only sets the
1398 * check bit in the tick_oneshot code, otherwise we might
1399 * deadlock vs. xtime_lock.
1401 if (tick_check_oneshot_change(!hrtimer_is_hres_enabled()))
1402 hrtimer_switch_to_hres();
1406 * Called from hardirq context every jiffy
1408 void hrtimer_run_queues(void)
1410 struct rb_node *node;
1411 struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
1412 struct hrtimer_clock_base *base;
1413 int index, gettime = 1;
1415 if (hrtimer_hres_active())
1418 for (index = 0; index < HRTIMER_MAX_CLOCK_BASES; index++) {
1419 base = &cpu_base->clock_base[index];
1425 hrtimer_get_softirq_time(cpu_base);
1429 spin_lock(&cpu_base->lock);
1431 while ((node = base->first)) {
1432 struct hrtimer *timer;
1434 timer = rb_entry(node, struct hrtimer, node);
1435 if (base->softirq_time.tv64 <=
1436 hrtimer_get_expires_tv64(timer))
1439 __run_hrtimer(timer, &base->softirq_time);
1441 spin_unlock(&cpu_base->lock);
1446 * Sleep related functions:
1448 static enum hrtimer_restart hrtimer_wakeup(struct hrtimer *timer)
1450 struct hrtimer_sleeper *t =
1451 container_of(timer, struct hrtimer_sleeper, timer);
1452 struct task_struct *task = t->task;
1456 wake_up_process(task);
1458 return HRTIMER_NORESTART;
1461 void hrtimer_init_sleeper(struct hrtimer_sleeper *sl, struct task_struct *task)
1463 sl->timer.function = hrtimer_wakeup;
1466 EXPORT_SYMBOL_GPL(hrtimer_init_sleeper);
1468 static int __sched do_nanosleep(struct hrtimer_sleeper *t, enum hrtimer_mode mode)
1470 hrtimer_init_sleeper(t, current);
1473 set_current_state(TASK_INTERRUPTIBLE);
1474 hrtimer_start_expires(&t->timer, mode);
1475 if (!hrtimer_active(&t->timer))
1478 if (likely(t->task))
1481 hrtimer_cancel(&t->timer);
1482 mode = HRTIMER_MODE_ABS;
1484 } while (t->task && !signal_pending(current));
1486 __set_current_state(TASK_RUNNING);
1488 return t->task == NULL;
1491 static int update_rmtp(struct hrtimer *timer, struct timespec __user *rmtp)
1493 struct timespec rmt;
1496 rem = hrtimer_expires_remaining(timer);
1499 rmt = ktime_to_timespec(rem);
1501 if (copy_to_user(rmtp, &rmt, sizeof(*rmtp)))
1507 long __sched hrtimer_nanosleep_restart(struct restart_block *restart)
1509 struct hrtimer_sleeper t;
1510 struct timespec __user *rmtp;
1513 hrtimer_init_on_stack(&t.timer, restart->nanosleep.index,
1515 hrtimer_set_expires_tv64(&t.timer, restart->nanosleep.expires);
1517 if (do_nanosleep(&t, HRTIMER_MODE_ABS))
1520 rmtp = restart->nanosleep.rmtp;
1522 ret = update_rmtp(&t.timer, rmtp);
1527 /* The other values in restart are already filled in */
1528 ret = -ERESTART_RESTARTBLOCK;
1530 destroy_hrtimer_on_stack(&t.timer);
1534 long hrtimer_nanosleep(struct timespec *rqtp, struct timespec __user *rmtp,
1535 const enum hrtimer_mode mode, const clockid_t clockid)
1537 struct restart_block *restart;
1538 struct hrtimer_sleeper t;
1540 unsigned long slack;
1542 slack = current->timer_slack_ns;
1543 if (rt_task(current))
1546 hrtimer_init_on_stack(&t.timer, clockid, mode);
1547 hrtimer_set_expires_range_ns(&t.timer, timespec_to_ktime(*rqtp), slack);
1548 if (do_nanosleep(&t, mode))
1551 /* Absolute timers do not update the rmtp value and restart: */
1552 if (mode == HRTIMER_MODE_ABS) {
1553 ret = -ERESTARTNOHAND;
1558 ret = update_rmtp(&t.timer, rmtp);
1563 restart = ¤t_thread_info()->restart_block;
1564 restart->fn = hrtimer_nanosleep_restart;
1565 restart->nanosleep.index = t.timer.base->index;
1566 restart->nanosleep.rmtp = rmtp;
1567 restart->nanosleep.expires = hrtimer_get_expires_tv64(&t.timer);
1569 ret = -ERESTART_RESTARTBLOCK;
1571 destroy_hrtimer_on_stack(&t.timer);
1575 SYSCALL_DEFINE2(nanosleep, struct timespec __user *, rqtp,
1576 struct timespec __user *, rmtp)
1580 if (copy_from_user(&tu, rqtp, sizeof(tu)))
1583 if (!timespec_valid(&tu))
1586 return hrtimer_nanosleep(&tu, rmtp, HRTIMER_MODE_REL, CLOCK_MONOTONIC);
1590 * Functions related to boot-time initialization:
1592 static void __cpuinit init_hrtimers_cpu(int cpu)
1594 struct hrtimer_cpu_base *cpu_base = &per_cpu(hrtimer_bases, cpu);
1597 spin_lock_init(&cpu_base->lock);
1599 for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++)
1600 cpu_base->clock_base[i].cpu_base = cpu_base;
1602 hrtimer_init_hres(cpu_base);
1605 #ifdef CONFIG_HOTPLUG_CPU
1607 static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base,
1608 struct hrtimer_clock_base *new_base)
1610 struct hrtimer *timer;
1611 struct rb_node *node;
1613 while ((node = rb_first(&old_base->active))) {
1614 timer = rb_entry(node, struct hrtimer, node);
1615 BUG_ON(hrtimer_callback_running(timer));
1616 debug_deactivate(timer);
1619 * Mark it as STATE_MIGRATE not INACTIVE otherwise the
1620 * timer could be seen as !active and just vanish away
1621 * under us on another CPU
1623 __remove_hrtimer(timer, old_base, HRTIMER_STATE_MIGRATE, 0);
1624 timer->base = new_base;
1626 * Enqueue the timers on the new cpu. This does not
1627 * reprogram the event device in case the timer
1628 * expires before the earliest on this CPU, but we run
1629 * hrtimer_interrupt after we migrated everything to
1630 * sort out already expired timers and reprogram the
1633 enqueue_hrtimer(timer, new_base);
1635 /* Clear the migration state bit */
1636 timer->state &= ~HRTIMER_STATE_MIGRATE;
1640 static void migrate_hrtimers(int scpu)
1642 struct hrtimer_cpu_base *old_base, *new_base;
1645 BUG_ON(cpu_online(scpu));
1646 tick_cancel_sched_timer(scpu);
1648 local_irq_disable();
1649 old_base = &per_cpu(hrtimer_bases, scpu);
1650 new_base = &__get_cpu_var(hrtimer_bases);
1652 * The caller is globally serialized and nobody else
1653 * takes two locks at once, deadlock is not possible.
1655 spin_lock(&new_base->lock);
1656 spin_lock_nested(&old_base->lock, SINGLE_DEPTH_NESTING);
1658 for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
1659 migrate_hrtimer_list(&old_base->clock_base[i],
1660 &new_base->clock_base[i]);
1663 spin_unlock(&old_base->lock);
1664 spin_unlock(&new_base->lock);
1666 /* Check, if we got expired work to do */
1667 __hrtimer_peek_ahead_timers();
1671 #endif /* CONFIG_HOTPLUG_CPU */
1673 static int __cpuinit hrtimer_cpu_notify(struct notifier_block *self,
1674 unsigned long action, void *hcpu)
1676 int scpu = (long)hcpu;
1680 case CPU_UP_PREPARE:
1681 case CPU_UP_PREPARE_FROZEN:
1682 init_hrtimers_cpu(scpu);
1685 #ifdef CONFIG_HOTPLUG_CPU
1687 case CPU_DYING_FROZEN:
1688 clockevents_notify(CLOCK_EVT_NOTIFY_CPU_DYING, &scpu);
1691 case CPU_DEAD_FROZEN:
1693 clockevents_notify(CLOCK_EVT_NOTIFY_CPU_DEAD, &scpu);
1694 migrate_hrtimers(scpu);
1706 static struct notifier_block __cpuinitdata hrtimers_nb = {
1707 .notifier_call = hrtimer_cpu_notify,
1710 void __init hrtimers_init(void)
1712 hrtimer_cpu_notify(&hrtimers_nb, (unsigned long)CPU_UP_PREPARE,
1713 (void *)(long)smp_processor_id());
1714 register_cpu_notifier(&hrtimers_nb);
1715 #ifdef CONFIG_HIGH_RES_TIMERS
1716 open_softirq(HRTIMER_SOFTIRQ, run_hrtimer_softirq);
1721 * schedule_hrtimeout_range - sleep until timeout
1722 * @expires: timeout value (ktime_t)
1723 * @delta: slack in expires timeout (ktime_t)
1724 * @mode: timer mode, HRTIMER_MODE_ABS or HRTIMER_MODE_REL
1726 * Make the current task sleep until the given expiry time has
1727 * elapsed. The routine will return immediately unless
1728 * the current task state has been set (see set_current_state()).
1730 * The @delta argument gives the kernel the freedom to schedule the
1731 * actual wakeup to a time that is both power and performance friendly.
1732 * The kernel give the normal best effort behavior for "@expires+@delta",
1733 * but may decide to fire the timer earlier, but no earlier than @expires.
1735 * You can set the task state as follows -
1737 * %TASK_UNINTERRUPTIBLE - at least @timeout time is guaranteed to
1738 * pass before the routine returns.
1740 * %TASK_INTERRUPTIBLE - the routine may return early if a signal is
1741 * delivered to the current task.
1743 * The current task state is guaranteed to be TASK_RUNNING when this
1746 * Returns 0 when the timer has expired otherwise -EINTR
1748 int __sched schedule_hrtimeout_range(ktime_t *expires, unsigned long delta,
1749 const enum hrtimer_mode mode)
1751 struct hrtimer_sleeper t;
1754 * Optimize when a zero timeout value is given. It does not
1755 * matter whether this is an absolute or a relative time.
1757 if (expires && !expires->tv64) {
1758 __set_current_state(TASK_RUNNING);
1763 * A NULL parameter means "inifinte"
1767 __set_current_state(TASK_RUNNING);
1771 hrtimer_init_on_stack(&t.timer, CLOCK_MONOTONIC, mode);
1772 hrtimer_set_expires_range_ns(&t.timer, *expires, delta);
1774 hrtimer_init_sleeper(&t, current);
1776 hrtimer_start_expires(&t.timer, mode);
1777 if (!hrtimer_active(&t.timer))
1783 hrtimer_cancel(&t.timer);
1784 destroy_hrtimer_on_stack(&t.timer);
1786 __set_current_state(TASK_RUNNING);
1788 return !t.task ? 0 : -EINTR;
1790 EXPORT_SYMBOL_GPL(schedule_hrtimeout_range);
1793 * schedule_hrtimeout - sleep until timeout
1794 * @expires: timeout value (ktime_t)
1795 * @mode: timer mode, HRTIMER_MODE_ABS or HRTIMER_MODE_REL
1797 * Make the current task sleep until the given expiry time has
1798 * elapsed. The routine will return immediately unless
1799 * the current task state has been set (see set_current_state()).
1801 * You can set the task state as follows -
1803 * %TASK_UNINTERRUPTIBLE - at least @timeout time is guaranteed to
1804 * pass before the routine returns.
1806 * %TASK_INTERRUPTIBLE - the routine may return early if a signal is
1807 * delivered to the current task.
1809 * The current task state is guaranteed to be TASK_RUNNING when this
1812 * Returns 0 when the timer has expired otherwise -EINTR
1814 int __sched schedule_hrtimeout(ktime_t *expires,
1815 const enum hrtimer_mode mode)
1817 return schedule_hrtimeout_range(expires, 0, mode);
1819 EXPORT_SYMBOL_GPL(schedule_hrtimeout);