xfs: avoid memory allocation under m_peraglock in growfs code
[safe/jmp/linux-2.6] / include / linux / ide.h
1 #ifndef _IDE_H
2 #define _IDE_H
3 /*
4  *  linux/include/linux/ide.h
5  *
6  *  Copyright (C) 1994-2002  Linus Torvalds & authors
7  */
8
9 #include <linux/init.h>
10 #include <linux/ioport.h>
11 #include <linux/ata.h>
12 #include <linux/blkdev.h>
13 #include <linux/proc_fs.h>
14 #include <linux/interrupt.h>
15 #include <linux/bitops.h>
16 #include <linux/bio.h>
17 #include <linux/device.h>
18 #include <linux/pci.h>
19 #include <linux/completion.h>
20 #include <linux/pm.h>
21 #ifdef CONFIG_BLK_DEV_IDEACPI
22 #include <acpi/acpi.h>
23 #endif
24 #include <asm/byteorder.h>
25 #include <asm/system.h>
26 #include <asm/io.h>
27 #include <asm/mutex.h>
28
29 /* for request_sense */
30 #include <linux/cdrom.h>
31
32 #if defined(CONFIG_CRIS) || defined(CONFIG_FRV) || defined(CONFIG_MN10300)
33 # define SUPPORT_VLB_SYNC 0
34 #else
35 # define SUPPORT_VLB_SYNC 1
36 #endif
37
38 /*
39  * Probably not wise to fiddle with these
40  */
41 #define IDE_DEFAULT_MAX_FAILURES        1
42 #define ERROR_MAX       8       /* Max read/write errors per sector */
43 #define ERROR_RESET     3       /* Reset controller every 4th retry */
44 #define ERROR_RECAL     1       /* Recalibrate every 2nd retry */
45
46 /* Error codes returned in rq->errors to the higher part of the driver. */
47 enum {
48         IDE_DRV_ERROR_GENERAL   = 101,
49         IDE_DRV_ERROR_FILEMARK  = 102,
50         IDE_DRV_ERROR_EOD       = 103,
51 };
52
53 /*
54  * Definitions for accessing IDE controller registers
55  */
56 #define IDE_NR_PORTS            (10)
57
58 struct ide_io_ports {
59         unsigned long   data_addr;
60
61         union {
62                 unsigned long error_addr;       /*   read:  error */
63                 unsigned long feature_addr;     /*  write: feature */
64         };
65
66         unsigned long   nsect_addr;
67         unsigned long   lbal_addr;
68         unsigned long   lbam_addr;
69         unsigned long   lbah_addr;
70
71         unsigned long   device_addr;
72
73         union {
74                 unsigned long status_addr;      /*  read: status  */
75                 unsigned long command_addr;     /* write: command */
76         };
77
78         unsigned long   ctl_addr;
79
80         unsigned long   irq_addr;
81 };
82
83 #define OK_STAT(stat,good,bad)  (((stat)&((good)|(bad)))==(good))
84
85 #define BAD_R_STAT      (ATA_BUSY | ATA_ERR)
86 #define BAD_W_STAT      (BAD_R_STAT | ATA_DF)
87 #define BAD_STAT        (BAD_R_STAT | ATA_DRQ)
88 #define DRIVE_READY     (ATA_DRDY | ATA_DSC)
89
90 #define BAD_CRC         (ATA_ABORTED | ATA_ICRC)
91
92 #define SATA_NR_PORTS           (3)     /* 16 possible ?? */
93
94 #define SATA_STATUS_OFFSET      (0)
95 #define SATA_ERROR_OFFSET       (1)
96 #define SATA_CONTROL_OFFSET     (2)
97
98 /*
99  * Our Physical Region Descriptor (PRD) table should be large enough
100  * to handle the biggest I/O request we are likely to see.  Since requests
101  * can have no more than 256 sectors, and since the typical blocksize is
102  * two or more sectors, we could get by with a limit of 128 entries here for
103  * the usual worst case.  Most requests seem to include some contiguous blocks,
104  * further reducing the number of table entries required.
105  *
106  * The driver reverts to PIO mode for individual requests that exceed
107  * this limit (possible with 512 byte blocksizes, eg. MSDOS f/s), so handling
108  * 100% of all crazy scenarios here is not necessary.
109  *
110  * As it turns out though, we must allocate a full 4KB page for this,
111  * so the two PRD tables (ide0 & ide1) will each get half of that,
112  * allowing each to have about 256 entries (8 bytes each) from this.
113  */
114 #define PRD_BYTES       8
115 #define PRD_ENTRIES     256
116
117 /*
118  * Some more useful definitions
119  */
120 #define PARTN_BITS      6       /* number of minor dev bits for partitions */
121 #define MAX_DRIVES      2       /* per interface; 2 assumed by lots of code */
122 #define SECTOR_SIZE     512
123
124 /*
125  * Timeouts for various operations:
126  */
127 enum {
128         /* spec allows up to 20ms */
129         WAIT_DRQ        = HZ / 10,      /* 100ms */
130         /* some laptops are very slow */
131         WAIT_READY      = 5 * HZ,       /* 5s */
132         /* should be less than 3ms (?), if all ATAPI CD is closed at boot */
133         WAIT_PIDENTIFY  = 10 * HZ,      /* 10s */
134         /* worst case when spinning up */
135         WAIT_WORSTCASE  = 30 * HZ,      /* 30s */
136         /* maximum wait for an IRQ to happen */
137         WAIT_CMD        = 10 * HZ,      /* 10s */
138         /* Some drives require a longer IRQ timeout. */
139         WAIT_FLOPPY_CMD = 50 * HZ,      /* 50s */
140         /*
141          * Some drives (for example, Seagate STT3401A Travan) require a very
142          * long timeout, because they don't return an interrupt or clear their
143          * BSY bit until after the command completes (even retension commands).
144          */
145         WAIT_TAPE_CMD   = 900 * HZ,     /* 900s */
146         /* minimum sleep time */
147         WAIT_MIN_SLEEP  = HZ / 50,      /* 20ms */
148 };
149
150 /*
151  * Op codes for special requests to be handled by ide_special_rq().
152  * Values should be in the range of 0x20 to 0x3f.
153  */
154 #define REQ_DRIVE_RESET         0x20
155 #define REQ_DEVSET_EXEC         0x21
156 #define REQ_PARK_HEADS          0x22
157 #define REQ_UNPARK_HEADS        0x23
158
159 /*
160  * Check for an interrupt and acknowledge the interrupt status
161  */
162 struct hwif_s;
163 typedef int (ide_ack_intr_t)(struct hwif_s *);
164
165 /*
166  * hwif_chipset_t is used to keep track of the specific hardware
167  * chipset used by each IDE interface, if known.
168  */
169 enum {          ide_unknown,    ide_generic,    ide_pci,
170                 ide_cmd640,     ide_dtc2278,    ide_ali14xx,
171                 ide_qd65xx,     ide_umc8672,    ide_ht6560b,
172                 ide_4drives,    ide_pmac,       ide_acorn,
173                 ide_au1xxx,     ide_palm3710
174 };
175
176 typedef u8 hwif_chipset_t;
177
178 /*
179  * Structure to hold all information about the location of this port
180  */
181 struct ide_hw {
182         union {
183                 struct ide_io_ports     io_ports;
184                 unsigned long           io_ports_array[IDE_NR_PORTS];
185         };
186
187         int             irq;                    /* our irq number */
188         ide_ack_intr_t  *ack_intr;              /* acknowledge interrupt */
189         struct device   *dev, *parent;
190         unsigned long   config;
191 };
192
193 static inline void ide_std_init_ports(struct ide_hw *hw,
194                                       unsigned long io_addr,
195                                       unsigned long ctl_addr)
196 {
197         unsigned int i;
198
199         for (i = 0; i <= 7; i++)
200                 hw->io_ports_array[i] = io_addr++;
201
202         hw->io_ports.ctl_addr = ctl_addr;
203 }
204
205 #define MAX_HWIFS       10
206
207 /*
208  * Now for the data we need to maintain per-drive:  ide_drive_t
209  */
210
211 #define ide_scsi        0x21
212 #define ide_disk        0x20
213 #define ide_optical     0x7
214 #define ide_cdrom       0x5
215 #define ide_tape        0x1
216 #define ide_floppy      0x0
217
218 /*
219  * Special Driver Flags
220  */
221 enum {
222         IDE_SFLAG_SET_GEOMETRY          = (1 << 0),
223         IDE_SFLAG_RECALIBRATE           = (1 << 1),
224         IDE_SFLAG_SET_MULTMODE          = (1 << 2),
225 };
226
227 /*
228  * Status returned from various ide_ functions
229  */
230 typedef enum {
231         ide_stopped,    /* no drive operation was started */
232         ide_started,    /* a drive operation was started, handler was set */
233 } ide_startstop_t;
234
235 enum {
236         IDE_VALID_ERROR                 = (1 << 1),
237         IDE_VALID_FEATURE               = IDE_VALID_ERROR,
238         IDE_VALID_NSECT                 = (1 << 2),
239         IDE_VALID_LBAL                  = (1 << 3),
240         IDE_VALID_LBAM                  = (1 << 4),
241         IDE_VALID_LBAH                  = (1 << 5),
242         IDE_VALID_DEVICE                = (1 << 6),
243         IDE_VALID_LBA                   = IDE_VALID_LBAL |
244                                           IDE_VALID_LBAM |
245                                           IDE_VALID_LBAH,
246         IDE_VALID_OUT_TF                = IDE_VALID_FEATURE |
247                                           IDE_VALID_NSECT |
248                                           IDE_VALID_LBA,
249         IDE_VALID_IN_TF                 = IDE_VALID_NSECT |
250                                           IDE_VALID_LBA,
251         IDE_VALID_OUT_HOB               = IDE_VALID_OUT_TF,
252         IDE_VALID_IN_HOB                = IDE_VALID_ERROR |
253                                           IDE_VALID_NSECT |
254                                           IDE_VALID_LBA,
255 };
256
257 enum {
258         IDE_TFLAG_LBA48                 = (1 << 0),
259         IDE_TFLAG_WRITE                 = (1 << 1),
260         IDE_TFLAG_CUSTOM_HANDLER        = (1 << 2),
261         IDE_TFLAG_DMA_PIO_FALLBACK      = (1 << 3),
262         /* force 16-bit I/O operations */
263         IDE_TFLAG_IO_16BIT              = (1 << 4),
264         /* struct ide_cmd was allocated using kmalloc() */
265         IDE_TFLAG_DYN                   = (1 << 5),
266         IDE_TFLAG_FS                    = (1 << 6),
267         IDE_TFLAG_MULTI_PIO             = (1 << 7),
268 };
269
270 enum {
271         IDE_FTFLAG_FLAGGED              = (1 << 0),
272         IDE_FTFLAG_SET_IN_FLAGS         = (1 << 1),
273         IDE_FTFLAG_OUT_DATA             = (1 << 2),
274         IDE_FTFLAG_IN_DATA              = (1 << 3),
275 };
276
277 struct ide_taskfile {
278         u8      data;           /* 0: data byte (for TASKFILE ioctl) */
279         union {                 /* 1: */
280                 u8 error;       /*  read: error */
281                 u8 feature;     /* write: feature */
282         };
283         u8      nsect;          /* 2: number of sectors */
284         u8      lbal;           /* 3: LBA low */
285         u8      lbam;           /* 4: LBA mid */
286         u8      lbah;           /* 5: LBA high */
287         u8      device;         /* 6: device select */
288         union {                 /* 7: */
289                 u8 status;      /*  read: status */
290                 u8 command;     /* write: command */
291         };
292 };
293
294 struct ide_cmd {
295         struct ide_taskfile     tf;
296         struct ide_taskfile     hob;
297         struct {
298                 struct {
299                         u8              tf;
300                         u8              hob;
301                 } out, in;
302         } valid;
303
304         u8                      tf_flags;
305         u8                      ftf_flags;      /* for TASKFILE ioctl */
306         int                     protocol;
307
308         int                     sg_nents;         /* number of sg entries */
309         int                     orig_sg_nents;
310         int                     sg_dma_direction; /* DMA transfer direction */
311
312         unsigned int            nbytes;
313         unsigned int            nleft;
314         unsigned int            last_xfer_len;
315
316         struct scatterlist      *cursg;
317         unsigned int            cursg_ofs;
318
319         struct request          *rq;            /* copy of request */
320 };
321
322 /* ATAPI packet command flags */
323 enum {
324         /* set when an error is considered normal - no retry (ide-tape) */
325         PC_FLAG_ABORT                   = (1 << 0),
326         PC_FLAG_SUPPRESS_ERROR          = (1 << 1),
327         PC_FLAG_WAIT_FOR_DSC            = (1 << 2),
328         PC_FLAG_DMA_OK                  = (1 << 3),
329         PC_FLAG_DMA_IN_PROGRESS         = (1 << 4),
330         PC_FLAG_DMA_ERROR               = (1 << 5),
331         PC_FLAG_WRITING                 = (1 << 6),
332 };
333
334 /*
335  * With each packet command, we allocate a buffer of IDE_PC_BUFFER_SIZE bytes.
336  * This is used for several packet commands (not for READ/WRITE commands).
337  */
338 #define IDE_PC_BUFFER_SIZE      64
339 #define ATAPI_WAIT_PC           (60 * HZ)
340
341 struct ide_atapi_pc {
342         /* actual packet bytes */
343         u8 c[12];
344         /* incremented on each retry */
345         int retries;
346         int error;
347
348         /* bytes to transfer */
349         int req_xfer;
350         /* bytes actually transferred */
351         int xferred;
352
353         /* data buffer */
354         u8 *buf;
355         int buf_size;
356
357         /* the corresponding request */
358         struct request *rq;
359
360         unsigned long flags;
361
362         /*
363          * those are more or less driver-specific and some of them are subject
364          * to change/removal later.
365          */
366         u8 pc_buf[IDE_PC_BUFFER_SIZE];
367
368         unsigned long timeout;
369 };
370
371 struct ide_devset;
372 struct ide_driver;
373
374 #ifdef CONFIG_BLK_DEV_IDEACPI
375 struct ide_acpi_drive_link;
376 struct ide_acpi_hwif_link;
377 #endif
378
379 struct ide_drive_s;
380
381 struct ide_disk_ops {
382         int             (*check)(struct ide_drive_s *, const char *);
383         int             (*get_capacity)(struct ide_drive_s *);
384         u64             (*set_capacity)(struct ide_drive_s *, u64);
385         void            (*setup)(struct ide_drive_s *);
386         void            (*flush)(struct ide_drive_s *);
387         int             (*init_media)(struct ide_drive_s *, struct gendisk *);
388         int             (*set_doorlock)(struct ide_drive_s *, struct gendisk *,
389                                         int);
390         ide_startstop_t (*do_request)(struct ide_drive_s *, struct request *,
391                                       sector_t);
392         int             (*ioctl)(struct ide_drive_s *, struct block_device *,
393                                  fmode_t, unsigned int, unsigned long);
394 };
395
396 /* ATAPI device flags */
397 enum {
398         IDE_AFLAG_DRQ_INTERRUPT         = (1 << 0),
399
400         /* ide-cd */
401         /* Drive cannot eject the disc. */
402         IDE_AFLAG_NO_EJECT              = (1 << 1),
403         /* Drive is a pre ATAPI 1.2 drive. */
404         IDE_AFLAG_PRE_ATAPI12           = (1 << 2),
405         /* TOC addresses are in BCD. */
406         IDE_AFLAG_TOCADDR_AS_BCD        = (1 << 3),
407         /* TOC track numbers are in BCD. */
408         IDE_AFLAG_TOCTRACKS_AS_BCD      = (1 << 4),
409         /* Saved TOC information is current. */
410         IDE_AFLAG_TOC_VALID             = (1 << 6),
411         /* We think that the drive door is locked. */
412         IDE_AFLAG_DOOR_LOCKED           = (1 << 7),
413         /* SET_CD_SPEED command is unsupported. */
414         IDE_AFLAG_NO_SPEED_SELECT       = (1 << 8),
415         IDE_AFLAG_VERTOS_300_SSD        = (1 << 9),
416         IDE_AFLAG_VERTOS_600_ESD        = (1 << 10),
417         IDE_AFLAG_SANYO_3CD             = (1 << 11),
418         IDE_AFLAG_FULL_CAPS_PAGE        = (1 << 12),
419         IDE_AFLAG_PLAY_AUDIO_OK         = (1 << 13),
420         IDE_AFLAG_LE_SPEED_FIELDS       = (1 << 14),
421
422         /* ide-floppy */
423         /* Avoid commands not supported in Clik drive */
424         IDE_AFLAG_CLIK_DRIVE            = (1 << 15),
425         /* Requires BH algorithm for packets */
426         IDE_AFLAG_ZIP_DRIVE             = (1 << 16),
427         /* Supports format progress report */
428         IDE_AFLAG_SRFP                  = (1 << 17),
429
430         /* ide-tape */
431         IDE_AFLAG_IGNORE_DSC            = (1 << 18),
432         /* 0 When the tape position is unknown */
433         IDE_AFLAG_ADDRESS_VALID         = (1 << 19),
434         /* Device already opened */
435         IDE_AFLAG_BUSY                  = (1 << 20),
436         /* Attempt to auto-detect the current user block size */
437         IDE_AFLAG_DETECT_BS             = (1 << 21),
438         /* Currently on a filemark */
439         IDE_AFLAG_FILEMARK              = (1 << 22),
440         /* 0 = no tape is loaded, so we don't rewind after ejecting */
441         IDE_AFLAG_MEDIUM_PRESENT        = (1 << 23),
442
443         IDE_AFLAG_NO_AUTOCLOSE          = (1 << 24),
444 };
445
446 /* device flags */
447 enum {
448         /* restore settings after device reset */
449         IDE_DFLAG_KEEP_SETTINGS         = (1 << 0),
450         /* device is using DMA for read/write */
451         IDE_DFLAG_USING_DMA             = (1 << 1),
452         /* okay to unmask other IRQs */
453         IDE_DFLAG_UNMASK                = (1 << 2),
454         /* don't attempt flushes */
455         IDE_DFLAG_NOFLUSH               = (1 << 3),
456         /* DSC overlap */
457         IDE_DFLAG_DSC_OVERLAP           = (1 << 4),
458         /* give potential excess bandwidth */
459         IDE_DFLAG_NICE1                 = (1 << 5),
460         /* device is physically present */
461         IDE_DFLAG_PRESENT               = (1 << 6),
462         /* disable Host Protected Area */
463         IDE_DFLAG_NOHPA                 = (1 << 7),
464         /* id read from device (synthetic if not set) */
465         IDE_DFLAG_ID_READ               = (1 << 8),
466         IDE_DFLAG_NOPROBE               = (1 << 9),
467         /* need to do check_media_change() */
468         IDE_DFLAG_REMOVABLE             = (1 << 10),
469         /* needed for removable devices */
470         IDE_DFLAG_ATTACH                = (1 << 11),
471         IDE_DFLAG_FORCED_GEOM           = (1 << 12),
472         /* disallow setting unmask bit */
473         IDE_DFLAG_NO_UNMASK             = (1 << 13),
474         /* disallow enabling 32-bit I/O */
475         IDE_DFLAG_NO_IO_32BIT           = (1 << 14),
476         /* for removable only: door lock/unlock works */
477         IDE_DFLAG_DOORLOCKING           = (1 << 15),
478         /* disallow DMA */
479         IDE_DFLAG_NODMA                 = (1 << 16),
480         /* powermanagment told us not to do anything, so sleep nicely */
481         IDE_DFLAG_BLOCKED               = (1 << 17),
482         /* sleeping & sleep field valid */
483         IDE_DFLAG_SLEEPING              = (1 << 18),
484         IDE_DFLAG_POST_RESET            = (1 << 19),
485         IDE_DFLAG_UDMA33_WARNED         = (1 << 20),
486         IDE_DFLAG_LBA48                 = (1 << 21),
487         /* status of write cache */
488         IDE_DFLAG_WCACHE                = (1 << 22),
489         /* used for ignoring ATA_DF */
490         IDE_DFLAG_NOWERR                = (1 << 23),
491         /* retrying in PIO */
492         IDE_DFLAG_DMA_PIO_RETRY         = (1 << 24),
493         IDE_DFLAG_LBA                   = (1 << 25),
494         /* don't unload heads */
495         IDE_DFLAG_NO_UNLOAD             = (1 << 26),
496         /* heads unloaded, please don't reset port */
497         IDE_DFLAG_PARKED                = (1 << 27),
498         IDE_DFLAG_MEDIA_CHANGED         = (1 << 28),
499         /* write protect */
500         IDE_DFLAG_WP                    = (1 << 29),
501         IDE_DFLAG_FORMAT_IN_PROGRESS    = (1 << 30),
502         IDE_DFLAG_NIEN_QUIRK            = (1 << 31),
503 };
504
505 struct ide_drive_s {
506         char            name[4];        /* drive name, such as "hda" */
507         char            driver_req[10]; /* requests specific driver */
508
509         struct request_queue    *queue; /* request queue */
510
511         struct request          *rq;    /* current request */
512         void            *driver_data;   /* extra driver data */
513         u16                     *id;    /* identification info */
514 #ifdef CONFIG_IDE_PROC_FS
515         struct proc_dir_entry *proc;    /* /proc/ide/ directory entry */
516         const struct ide_proc_devset *settings; /* /proc/ide/ drive settings */
517 #endif
518         struct hwif_s           *hwif;  /* actually (ide_hwif_t *) */
519
520         const struct ide_disk_ops *disk_ops;
521
522         unsigned long dev_flags;
523
524         unsigned long sleep;            /* sleep until this time */
525         unsigned long timeout;          /* max time to wait for irq */
526
527         u8      special_flags;          /* special action flags */
528
529         u8      select;                 /* basic drive/head select reg value */
530         u8      retry_pio;              /* retrying dma capable host in pio */
531         u8      waiting_for_dma;        /* dma currently in progress */
532         u8      dma;                    /* atapi dma flag */
533
534         u8      init_speed;     /* transfer rate set at boot */
535         u8      current_speed;  /* current transfer rate set */
536         u8      desired_speed;  /* desired transfer rate set */
537         u8      dn;             /* now wide spread use */
538         u8      acoustic;       /* acoustic management */
539         u8      media;          /* disk, cdrom, tape, floppy, ... */
540         u8      ready_stat;     /* min status value for drive ready */
541         u8      mult_count;     /* current multiple sector setting */
542         u8      mult_req;       /* requested multiple sector setting */
543         u8      io_32bit;       /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
544         u8      bad_wstat;      /* used for ignoring ATA_DF */
545         u8      head;           /* "real" number of heads */
546         u8      sect;           /* "real" sectors per track */
547         u8      bios_head;      /* BIOS/fdisk/LILO number of heads */
548         u8      bios_sect;      /* BIOS/fdisk/LILO sectors per track */
549
550         /* delay this long before sending packet command */
551         u8 pc_delay;
552
553         unsigned int    bios_cyl;       /* BIOS/fdisk/LILO number of cyls */
554         unsigned int    cyl;            /* "real" number of cyls */
555         unsigned int    drive_data;     /* used by set_pio_mode/dev_select() */
556         unsigned int    failures;       /* current failure count */
557         unsigned int    max_failures;   /* maximum allowed failure count */
558         u64             probed_capacity;/* initial/native media capacity */
559         u64             capacity64;     /* total number of sectors */
560
561         int             lun;            /* logical unit */
562         int             crc_count;      /* crc counter to reduce drive speed */
563
564         unsigned long   debug_mask;     /* debugging levels switch */
565
566 #ifdef CONFIG_BLK_DEV_IDEACPI
567         struct ide_acpi_drive_link *acpidata;
568 #endif
569         struct list_head list;
570         struct device   gendev;
571         struct completion gendev_rel_comp;      /* to deal with device release() */
572
573         /* current packet command */
574         struct ide_atapi_pc *pc;
575
576         /* last failed packet command */
577         struct ide_atapi_pc *failed_pc;
578
579         /* callback for packet commands */
580         int  (*pc_callback)(struct ide_drive_s *, int);
581
582         ide_startstop_t (*irq_handler)(struct ide_drive_s *);
583
584         unsigned long atapi_flags;
585
586         struct ide_atapi_pc request_sense_pc;
587
588         /* current sense rq and buffer */
589         bool sense_rq_armed;
590         struct request sense_rq;
591         struct request_sense sense_data;
592 };
593
594 typedef struct ide_drive_s ide_drive_t;
595
596 #define to_ide_device(dev)              container_of(dev, ide_drive_t, gendev)
597
598 #define to_ide_drv(obj, cont_type)      \
599         container_of(obj, struct cont_type, dev)
600
601 #define ide_drv_g(disk, cont_type)      \
602         container_of((disk)->private_data, struct cont_type, driver)
603
604 struct ide_port_info;
605
606 struct ide_tp_ops {
607         void    (*exec_command)(struct hwif_s *, u8);
608         u8      (*read_status)(struct hwif_s *);
609         u8      (*read_altstatus)(struct hwif_s *);
610         void    (*write_devctl)(struct hwif_s *, u8);
611
612         void    (*dev_select)(ide_drive_t *);
613         void    (*tf_load)(ide_drive_t *, struct ide_taskfile *, u8);
614         void    (*tf_read)(ide_drive_t *, struct ide_taskfile *, u8);
615
616         void    (*input_data)(ide_drive_t *, struct ide_cmd *,
617                               void *, unsigned int);
618         void    (*output_data)(ide_drive_t *, struct ide_cmd *,
619                                void *, unsigned int);
620 };
621
622 extern const struct ide_tp_ops default_tp_ops;
623
624 /**
625  * struct ide_port_ops - IDE port operations
626  *
627  * @init_dev:           host specific initialization of a device
628  * @set_pio_mode:       routine to program host for PIO mode
629  * @set_dma_mode:       routine to program host for DMA mode
630  * @reset_poll:         chipset polling based on hba specifics
631  * @pre_reset:          chipset specific changes to default for device-hba resets
632  * @resetproc:          routine to reset controller after a disk reset
633  * @maskproc:           special host masking for drive selection
634  * @quirkproc:          check host's drive quirk list
635  * @clear_irq:          clear IRQ
636  *
637  * @mdma_filter:        filter MDMA modes
638  * @udma_filter:        filter UDMA modes
639  *
640  * @cable_detect:       detect cable type
641  */
642 struct ide_port_ops {
643         void    (*init_dev)(ide_drive_t *);
644         void    (*set_pio_mode)(ide_drive_t *, const u8);
645         void    (*set_dma_mode)(ide_drive_t *, const u8);
646         int     (*reset_poll)(ide_drive_t *);
647         void    (*pre_reset)(ide_drive_t *);
648         void    (*resetproc)(ide_drive_t *);
649         void    (*maskproc)(ide_drive_t *, int);
650         void    (*quirkproc)(ide_drive_t *);
651         void    (*clear_irq)(ide_drive_t *);
652
653         u8      (*mdma_filter)(ide_drive_t *);
654         u8      (*udma_filter)(ide_drive_t *);
655
656         u8      (*cable_detect)(struct hwif_s *);
657 };
658
659 struct ide_dma_ops {
660         void    (*dma_host_set)(struct ide_drive_s *, int);
661         int     (*dma_setup)(struct ide_drive_s *, struct ide_cmd *);
662         void    (*dma_start)(struct ide_drive_s *);
663         int     (*dma_end)(struct ide_drive_s *);
664         int     (*dma_test_irq)(struct ide_drive_s *);
665         void    (*dma_lost_irq)(struct ide_drive_s *);
666         /* below ones are optional */
667         int     (*dma_check)(struct ide_drive_s *, struct ide_cmd *);
668         int     (*dma_timer_expiry)(struct ide_drive_s *);
669         void    (*dma_clear)(struct ide_drive_s *);
670         /*
671          * The following method is optional and only required to be
672          * implemented for the SFF-8038i compatible controllers.
673          */
674         u8      (*dma_sff_read_status)(struct hwif_s *);
675 };
676
677 struct ide_host;
678
679 typedef struct hwif_s {
680         struct hwif_s *mate;            /* other hwif from same PCI chip */
681         struct proc_dir_entry *proc;    /* /proc/ide/ directory entry */
682
683         struct ide_host *host;
684
685         char name[6];                   /* name of interface, eg. "ide0" */
686
687         struct ide_io_ports     io_ports;
688
689         unsigned long   sata_scr[SATA_NR_PORTS];
690
691         ide_drive_t     *devices[MAX_DRIVES + 1];
692
693         u8 major;       /* our major number */
694         u8 index;       /* 0 for ide0; 1 for ide1; ... */
695         u8 channel;     /* for dual-port chips: 0=primary, 1=secondary */
696
697         u32 host_flags;
698
699         u8 pio_mask;
700
701         u8 ultra_mask;
702         u8 mwdma_mask;
703         u8 swdma_mask;
704
705         u8 cbl;         /* cable type */
706
707         hwif_chipset_t chipset; /* sub-module for tuning.. */
708
709         struct device *dev;
710
711         ide_ack_intr_t *ack_intr;
712
713         void (*rw_disk)(ide_drive_t *, struct request *);
714
715         const struct ide_tp_ops         *tp_ops;
716         const struct ide_port_ops       *port_ops;
717         const struct ide_dma_ops        *dma_ops;
718
719         /* dma physical region descriptor table (cpu view) */
720         unsigned int    *dmatable_cpu;
721         /* dma physical region descriptor table (dma view) */
722         dma_addr_t      dmatable_dma;
723
724         /* maximum number of PRD table entries */
725         int prd_max_nents;
726         /* PRD entry size in bytes */
727         int prd_ent_size;
728
729         /* Scatter-gather list used to build the above */
730         struct scatterlist *sg_table;
731         int sg_max_nents;               /* Maximum number of entries in it */
732
733         struct ide_cmd cmd;             /* current command */
734
735         int             rqsize;         /* max sectors per request */
736         int             irq;            /* our irq number */
737
738         unsigned long   dma_base;       /* base addr for dma ports */
739
740         unsigned long   config_data;    /* for use by chipset-specific code */
741         unsigned long   select_data;    /* for use by chipset-specific code */
742
743         unsigned long   extra_base;     /* extra addr for dma ports */
744         unsigned        extra_ports;    /* number of extra dma ports */
745
746         unsigned        present    : 1; /* this interface exists */
747         unsigned        busy       : 1; /* serializes devices on a port */
748
749         struct device           gendev;
750         struct device           *portdev;
751
752         struct completion gendev_rel_comp; /* To deal with device release() */
753
754         void            *hwif_data;     /* extra hwif data */
755
756 #ifdef CONFIG_BLK_DEV_IDEACPI
757         struct ide_acpi_hwif_link *acpidata;
758 #endif
759
760         /* IRQ handler, if active */
761         ide_startstop_t (*handler)(ide_drive_t *);
762
763         /* BOOL: polling active & poll_timeout field valid */
764         unsigned int polling : 1;
765
766         /* current drive */
767         ide_drive_t *cur_dev;
768
769         /* current request */
770         struct request *rq;
771
772         /* failsafe timer */
773         struct timer_list timer;
774         /* timeout value during long polls */
775         unsigned long poll_timeout;
776         /* queried upon timeouts */
777         int (*expiry)(ide_drive_t *);
778
779         int req_gen;
780         int req_gen_timer;
781
782         spinlock_t lock;
783 } ____cacheline_internodealigned_in_smp ide_hwif_t;
784
785 #define MAX_HOST_PORTS 4
786
787 struct ide_host {
788         ide_hwif_t      *ports[MAX_HOST_PORTS + 1];
789         unsigned int    n_ports;
790         struct device   *dev[2];
791
792         int             (*init_chipset)(struct pci_dev *);
793
794         void            (*get_lock)(irq_handler_t, void *);
795         void            (*release_lock)(void);
796
797         irq_handler_t   irq_handler;
798
799         unsigned long   host_flags;
800
801         int             irq_flags;
802
803         void            *host_priv;
804         ide_hwif_t      *cur_port;      /* for hosts requiring serialization */
805
806         /* used for hosts requiring serialization */
807         volatile unsigned long  host_busy;
808 };
809
810 #define IDE_HOST_BUSY 0
811
812 /*
813  *  internal ide interrupt handler type
814  */
815 typedef ide_startstop_t (ide_handler_t)(ide_drive_t *);
816 typedef int (ide_expiry_t)(ide_drive_t *);
817
818 /* used by ide-cd, ide-floppy, etc. */
819 typedef void (xfer_func_t)(ide_drive_t *, struct ide_cmd *, void *, unsigned);
820
821 extern struct mutex ide_setting_mtx;
822
823 /*
824  * configurable drive settings
825  */
826
827 #define DS_SYNC (1 << 0)
828
829 struct ide_devset {
830         int             (*get)(ide_drive_t *);
831         int             (*set)(ide_drive_t *, int);
832         unsigned int    flags;
833 };
834
835 #define __DEVSET(_flags, _get, _set) { \
836         .flags  = _flags, \
837         .get    = _get, \
838         .set    = _set, \
839 }
840
841 #define ide_devset_get(name, field) \
842 static int get_##name(ide_drive_t *drive) \
843 { \
844         return drive->field; \
845 }
846
847 #define ide_devset_set(name, field) \
848 static int set_##name(ide_drive_t *drive, int arg) \
849 { \
850         drive->field = arg; \
851         return 0; \
852 }
853
854 #define ide_devset_get_flag(name, flag) \
855 static int get_##name(ide_drive_t *drive) \
856 { \
857         return !!(drive->dev_flags & flag); \
858 }
859
860 #define ide_devset_set_flag(name, flag) \
861 static int set_##name(ide_drive_t *drive, int arg) \
862 { \
863         if (arg) \
864                 drive->dev_flags |= flag; \
865         else \
866                 drive->dev_flags &= ~flag; \
867         return 0; \
868 }
869
870 #define __IDE_DEVSET(_name, _flags, _get, _set) \
871 const struct ide_devset ide_devset_##_name = \
872         __DEVSET(_flags, _get, _set)
873
874 #define IDE_DEVSET(_name, _flags, _get, _set) \
875 static __IDE_DEVSET(_name, _flags, _get, _set)
876
877 #define ide_devset_rw(_name, _func) \
878 IDE_DEVSET(_name, 0, get_##_func, set_##_func)
879
880 #define ide_devset_w(_name, _func) \
881 IDE_DEVSET(_name, 0, NULL, set_##_func)
882
883 #define ide_ext_devset_rw(_name, _func) \
884 __IDE_DEVSET(_name, 0, get_##_func, set_##_func)
885
886 #define ide_ext_devset_rw_sync(_name, _func) \
887 __IDE_DEVSET(_name, DS_SYNC, get_##_func, set_##_func)
888
889 #define ide_decl_devset(_name) \
890 extern const struct ide_devset ide_devset_##_name
891
892 ide_decl_devset(io_32bit);
893 ide_decl_devset(keepsettings);
894 ide_decl_devset(pio_mode);
895 ide_decl_devset(unmaskirq);
896 ide_decl_devset(using_dma);
897
898 #ifdef CONFIG_IDE_PROC_FS
899 /*
900  * /proc/ide interface
901  */
902
903 #define ide_devset_rw_field(_name, _field) \
904 ide_devset_get(_name, _field); \
905 ide_devset_set(_name, _field); \
906 IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
907
908 #define ide_devset_rw_flag(_name, _field) \
909 ide_devset_get_flag(_name, _field); \
910 ide_devset_set_flag(_name, _field); \
911 IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
912
913 struct ide_proc_devset {
914         const char              *name;
915         const struct ide_devset *setting;
916         int                     min, max;
917         int                     (*mulf)(ide_drive_t *);
918         int                     (*divf)(ide_drive_t *);
919 };
920
921 #define __IDE_PROC_DEVSET(_name, _min, _max, _mulf, _divf) { \
922         .name = __stringify(_name), \
923         .setting = &ide_devset_##_name, \
924         .min = _min, \
925         .max = _max, \
926         .mulf = _mulf, \
927         .divf = _divf, \
928 }
929
930 #define IDE_PROC_DEVSET(_name, _min, _max) \
931 __IDE_PROC_DEVSET(_name, _min, _max, NULL, NULL)
932
933 typedef struct {
934         const char      *name;
935         mode_t          mode;
936         read_proc_t     *read_proc;
937         write_proc_t    *write_proc;
938 } ide_proc_entry_t;
939
940 void proc_ide_create(void);
941 void proc_ide_destroy(void);
942 void ide_proc_register_port(ide_hwif_t *);
943 void ide_proc_port_register_devices(ide_hwif_t *);
944 void ide_proc_unregister_device(ide_drive_t *);
945 void ide_proc_unregister_port(ide_hwif_t *);
946 void ide_proc_register_driver(ide_drive_t *, struct ide_driver *);
947 void ide_proc_unregister_driver(ide_drive_t *, struct ide_driver *);
948
949 read_proc_t proc_ide_read_capacity;
950 read_proc_t proc_ide_read_geometry;
951
952 /*
953  * Standard exit stuff:
954  */
955 #define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) \
956 {                                       \
957         len -= off;                     \
958         if (len < count) {              \
959                 *eof = 1;               \
960                 if (len <= 0)           \
961                         return 0;       \
962         } else                          \
963                 len = count;            \
964         *start = page + off;            \
965         return len;                     \
966 }
967 #else
968 static inline void proc_ide_create(void) { ; }
969 static inline void proc_ide_destroy(void) { ; }
970 static inline void ide_proc_register_port(ide_hwif_t *hwif) { ; }
971 static inline void ide_proc_port_register_devices(ide_hwif_t *hwif) { ; }
972 static inline void ide_proc_unregister_device(ide_drive_t *drive) { ; }
973 static inline void ide_proc_unregister_port(ide_hwif_t *hwif) { ; }
974 static inline void ide_proc_register_driver(ide_drive_t *drive,
975                                             struct ide_driver *driver) { ; }
976 static inline void ide_proc_unregister_driver(ide_drive_t *drive,
977                                               struct ide_driver *driver) { ; }
978 #define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) return 0;
979 #endif
980
981 enum {
982         /* enter/exit functions */
983         IDE_DBG_FUNC =                  (1 << 0),
984         /* sense key/asc handling */
985         IDE_DBG_SENSE =                 (1 << 1),
986         /* packet commands handling */
987         IDE_DBG_PC =                    (1 << 2),
988         /* request handling */
989         IDE_DBG_RQ =                    (1 << 3),
990         /* driver probing/setup */
991         IDE_DBG_PROBE =                 (1 << 4),
992 };
993
994 /* DRV_NAME has to be defined in the driver before using the macro below */
995 #define __ide_debug_log(lvl, fmt, args...)                              \
996 {                                                                       \
997         if (unlikely(drive->debug_mask & lvl))                          \
998                 printk(KERN_INFO DRV_NAME ": %s: " fmt "\n",            \
999                                           __func__, ## args);           \
1000 }
1001
1002 /*
1003  * Power Management state machine (rq->pm->pm_step).
1004  *
1005  * For each step, the core calls ide_start_power_step() first.
1006  * This can return:
1007  *      - ide_stopped : In this case, the core calls us back again unless
1008  *                      step have been set to ide_power_state_completed.
1009  *      - ide_started : In this case, the channel is left busy until an
1010  *                      async event (interrupt) occurs.
1011  * Typically, ide_start_power_step() will issue a taskfile request with
1012  * do_rw_taskfile().
1013  *
1014  * Upon reception of the interrupt, the core will call ide_complete_power_step()
1015  * with the error code if any. This routine should update the step value
1016  * and return. It should not start a new request. The core will call
1017  * ide_start_power_step() for the new step value, unless step have been
1018  * set to IDE_PM_COMPLETED.
1019  */
1020 enum {
1021         IDE_PM_START_SUSPEND,
1022         IDE_PM_FLUSH_CACHE      = IDE_PM_START_SUSPEND,
1023         IDE_PM_STANDBY,
1024
1025         IDE_PM_START_RESUME,
1026         IDE_PM_RESTORE_PIO      = IDE_PM_START_RESUME,
1027         IDE_PM_IDLE,
1028         IDE_PM_RESTORE_DMA,
1029
1030         IDE_PM_COMPLETED,
1031 };
1032
1033 int generic_ide_suspend(struct device *, pm_message_t);
1034 int generic_ide_resume(struct device *);
1035
1036 void ide_complete_power_step(ide_drive_t *, struct request *);
1037 ide_startstop_t ide_start_power_step(ide_drive_t *, struct request *);
1038 void ide_complete_pm_rq(ide_drive_t *, struct request *);
1039 void ide_check_pm_state(ide_drive_t *, struct request *);
1040
1041 /*
1042  * Subdrivers support.
1043  *
1044  * The gendriver.owner field should be set to the module owner of this driver.
1045  * The gendriver.name field should be set to the name of this driver
1046  */
1047 struct ide_driver {
1048         const char                      *version;
1049         ide_startstop_t (*do_request)(ide_drive_t *, struct request *, sector_t);
1050         struct device_driver    gen_driver;
1051         int             (*probe)(ide_drive_t *);
1052         void            (*remove)(ide_drive_t *);
1053         void            (*resume)(ide_drive_t *);
1054         void            (*shutdown)(ide_drive_t *);
1055 #ifdef CONFIG_IDE_PROC_FS
1056         ide_proc_entry_t *              (*proc_entries)(ide_drive_t *);
1057         const struct ide_proc_devset *  (*proc_devsets)(ide_drive_t *);
1058 #endif
1059 };
1060
1061 #define to_ide_driver(drv) container_of(drv, struct ide_driver, gen_driver)
1062
1063 int ide_device_get(ide_drive_t *);
1064 void ide_device_put(ide_drive_t *);
1065
1066 struct ide_ioctl_devset {
1067         unsigned int    get_ioctl;
1068         unsigned int    set_ioctl;
1069         const struct ide_devset *setting;
1070 };
1071
1072 int ide_setting_ioctl(ide_drive_t *, struct block_device *, unsigned int,
1073                       unsigned long, const struct ide_ioctl_devset *);
1074
1075 int generic_ide_ioctl(ide_drive_t *, struct block_device *, unsigned, unsigned long);
1076
1077 extern int ide_vlb_clk;
1078 extern int ide_pci_clk;
1079
1080 unsigned int ide_rq_bytes(struct request *);
1081 int ide_end_rq(ide_drive_t *, struct request *, int, unsigned int);
1082 void ide_kill_rq(ide_drive_t *, struct request *);
1083
1084 void __ide_set_handler(ide_drive_t *, ide_handler_t *, unsigned int);
1085 void ide_set_handler(ide_drive_t *, ide_handler_t *, unsigned int);
1086
1087 void ide_execute_command(ide_drive_t *, struct ide_cmd *, ide_handler_t *,
1088                          unsigned int);
1089
1090 void ide_pad_transfer(ide_drive_t *, int, int);
1091
1092 ide_startstop_t ide_error(ide_drive_t *, const char *, u8);
1093
1094 void ide_fix_driveid(u16 *);
1095
1096 extern void ide_fixstring(u8 *, const int, const int);
1097
1098 int ide_busy_sleep(ide_drive_t *, unsigned long, int);
1099
1100 int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
1101
1102 ide_startstop_t ide_do_park_unpark(ide_drive_t *, struct request *);
1103 ide_startstop_t ide_do_devset(ide_drive_t *, struct request *);
1104
1105 extern ide_startstop_t ide_do_reset (ide_drive_t *);
1106
1107 extern int ide_devset_execute(ide_drive_t *drive,
1108                               const struct ide_devset *setting, int arg);
1109
1110 void ide_complete_cmd(ide_drive_t *, struct ide_cmd *, u8, u8);
1111 int ide_complete_rq(ide_drive_t *, int, unsigned int);
1112
1113 void ide_tf_readback(ide_drive_t *drive, struct ide_cmd *cmd);
1114 void ide_tf_dump(const char *, struct ide_cmd *);
1115
1116 void ide_exec_command(ide_hwif_t *, u8);
1117 u8 ide_read_status(ide_hwif_t *);
1118 u8 ide_read_altstatus(ide_hwif_t *);
1119 void ide_write_devctl(ide_hwif_t *, u8);
1120
1121 void ide_dev_select(ide_drive_t *);
1122 void ide_tf_load(ide_drive_t *, struct ide_taskfile *, u8);
1123 void ide_tf_read(ide_drive_t *, struct ide_taskfile *, u8);
1124
1125 void ide_input_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int);
1126 void ide_output_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int);
1127
1128 void SELECT_MASK(ide_drive_t *, int);
1129
1130 u8 ide_read_error(ide_drive_t *);
1131 void ide_read_bcount_and_ireason(ide_drive_t *, u16 *, u8 *);
1132
1133 int ide_check_atapi_device(ide_drive_t *, const char *);
1134
1135 void ide_init_pc(struct ide_atapi_pc *);
1136
1137 /* Disk head parking */
1138 extern wait_queue_head_t ide_park_wq;
1139 ssize_t ide_park_show(struct device *dev, struct device_attribute *attr,
1140                       char *buf);
1141 ssize_t ide_park_store(struct device *dev, struct device_attribute *attr,
1142                        const char *buf, size_t len);
1143
1144 /*
1145  * Special requests for ide-tape block device strategy routine.
1146  *
1147  * In order to service a character device command, we add special requests to
1148  * the tail of our block device request queue and wait for their completion.
1149  */
1150 enum {
1151         REQ_IDETAPE_PC1         = (1 << 0), /* packet command (first stage) */
1152         REQ_IDETAPE_PC2         = (1 << 1), /* packet command (second stage) */
1153         REQ_IDETAPE_READ        = (1 << 2),
1154         REQ_IDETAPE_WRITE       = (1 << 3),
1155 };
1156
1157 int ide_queue_pc_tail(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *);
1158
1159 int ide_do_test_unit_ready(ide_drive_t *, struct gendisk *);
1160 int ide_do_start_stop(ide_drive_t *, struct gendisk *, int);
1161 int ide_set_media_lock(ide_drive_t *, struct gendisk *, int);
1162 void ide_create_request_sense_cmd(ide_drive_t *, struct ide_atapi_pc *);
1163 void ide_retry_pc(ide_drive_t *drive);
1164
1165 void ide_prep_sense(ide_drive_t *drive, struct request *rq);
1166 int ide_queue_sense_rq(ide_drive_t *drive, void *special);
1167
1168 int ide_cd_expiry(ide_drive_t *);
1169
1170 int ide_cd_get_xferlen(struct request *);
1171
1172 ide_startstop_t ide_issue_pc(ide_drive_t *, struct ide_cmd *);
1173
1174 ide_startstop_t do_rw_taskfile(ide_drive_t *, struct ide_cmd *);
1175
1176 void ide_pio_bytes(ide_drive_t *, struct ide_cmd *, unsigned int, unsigned int);
1177
1178 void ide_finish_cmd(ide_drive_t *, struct ide_cmd *, u8);
1179
1180 int ide_raw_taskfile(ide_drive_t *, struct ide_cmd *, u8 *, u16);
1181 int ide_no_data_taskfile(ide_drive_t *, struct ide_cmd *);
1182
1183 int ide_taskfile_ioctl(ide_drive_t *, unsigned long);
1184
1185 int ide_dev_read_id(ide_drive_t *, u8, u16 *);
1186
1187 extern int ide_driveid_update(ide_drive_t *);
1188 extern int ide_config_drive_speed(ide_drive_t *, u8);
1189 extern u8 eighty_ninty_three (ide_drive_t *);
1190 extern int taskfile_lib_get_identify(ide_drive_t *drive, u8 *);
1191
1192 extern int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout);
1193
1194 extern void ide_stall_queue(ide_drive_t *drive, unsigned long timeout);
1195
1196 extern void ide_timer_expiry(unsigned long);
1197 extern irqreturn_t ide_intr(int irq, void *dev_id);
1198 extern void do_ide_request(struct request_queue *);
1199
1200 void ide_init_disk(struct gendisk *, ide_drive_t *);
1201
1202 #ifdef CONFIG_IDEPCI_PCIBUS_ORDER
1203 extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner, const char *mod_name);
1204 #define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME)
1205 #else
1206 #define ide_pci_register_driver(d) pci_register_driver(d)
1207 #endif
1208
1209 static inline int ide_pci_is_in_compatibility_mode(struct pci_dev *dev)
1210 {
1211         if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 5) != 5)
1212                 return 1;
1213         return 0;
1214 }
1215
1216 void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *,
1217                          struct ide_hw *, struct ide_hw **);
1218 void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
1219
1220 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
1221 int ide_pci_set_master(struct pci_dev *, const char *);
1222 unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *);
1223 int ide_pci_check_simplex(ide_hwif_t *, const struct ide_port_info *);
1224 int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *);
1225 #else
1226 static inline int ide_hwif_setup_dma(ide_hwif_t *hwif,
1227                                      const struct ide_port_info *d)
1228 {
1229         return -EINVAL;
1230 }
1231 #endif
1232
1233 struct ide_pci_enablebit {
1234         u8      reg;    /* byte pci reg holding the enable-bit */
1235         u8      mask;   /* mask to isolate the enable-bit */
1236         u8      val;    /* value of masked reg when "enabled" */
1237 };
1238
1239 enum {
1240         /* Uses ISA control ports not PCI ones. */
1241         IDE_HFLAG_ISA_PORTS             = (1 << 0),
1242         /* single port device */
1243         IDE_HFLAG_SINGLE                = (1 << 1),
1244         /* don't use legacy PIO blacklist */
1245         IDE_HFLAG_PIO_NO_BLACKLIST      = (1 << 2),
1246         /* set for the second port of QD65xx */
1247         IDE_HFLAG_QD_2ND_PORT           = (1 << 3),
1248         /* use PIO8/9 for prefetch off/on */
1249         IDE_HFLAG_ABUSE_PREFETCH        = (1 << 4),
1250         /* use PIO6/7 for fast-devsel off/on */
1251         IDE_HFLAG_ABUSE_FAST_DEVSEL     = (1 << 5),
1252         /* use 100-102 and 200-202 PIO values to set DMA modes */
1253         IDE_HFLAG_ABUSE_DMA_MODES       = (1 << 6),
1254         /*
1255          * keep DMA setting when programming PIO mode, may be used only
1256          * for hosts which have separate PIO and DMA timings (ie. PMAC)
1257          */
1258         IDE_HFLAG_SET_PIO_MODE_KEEP_DMA = (1 << 7),
1259         /* program host for the transfer mode after programming device */
1260         IDE_HFLAG_POST_SET_MODE         = (1 << 8),
1261         /* don't program host/device for the transfer mode ("smart" hosts) */
1262         IDE_HFLAG_NO_SET_MODE           = (1 << 9),
1263         /* trust BIOS for programming chipset/device for DMA */
1264         IDE_HFLAG_TRUST_BIOS_FOR_DMA    = (1 << 10),
1265         /* host is CS5510/CS5520 */
1266         IDE_HFLAG_CS5520                = (1 << 11),
1267         /* ATAPI DMA is unsupported */
1268         IDE_HFLAG_NO_ATAPI_DMA          = (1 << 12),
1269         /* set if host is a "non-bootable" controller */
1270         IDE_HFLAG_NON_BOOTABLE          = (1 << 13),
1271         /* host doesn't support DMA */
1272         IDE_HFLAG_NO_DMA                = (1 << 14),
1273         /* check if host is PCI IDE device before allowing DMA */
1274         IDE_HFLAG_NO_AUTODMA            = (1 << 15),
1275         /* host uses MMIO */
1276         IDE_HFLAG_MMIO                  = (1 << 16),
1277         /* no LBA48 */
1278         IDE_HFLAG_NO_LBA48              = (1 << 17),
1279         /* no LBA48 DMA */
1280         IDE_HFLAG_NO_LBA48_DMA          = (1 << 18),
1281         /* data FIFO is cleared by an error */
1282         IDE_HFLAG_ERROR_STOPS_FIFO      = (1 << 19),
1283         /* serialize ports */
1284         IDE_HFLAG_SERIALIZE             = (1 << 20),
1285         /* host is DTC2278 */
1286         IDE_HFLAG_DTC2278               = (1 << 21),
1287         /* 4 devices on a single set of I/O ports */
1288         IDE_HFLAG_4DRIVES               = (1 << 22),
1289         /* host is TRM290 */
1290         IDE_HFLAG_TRM290                = (1 << 23),
1291         /* use 32-bit I/O ops */
1292         IDE_HFLAG_IO_32BIT              = (1 << 24),
1293         /* unmask IRQs */
1294         IDE_HFLAG_UNMASK_IRQS           = (1 << 25),
1295         IDE_HFLAG_BROKEN_ALTSTATUS      = (1 << 26),
1296         /* serialize ports if DMA is possible (for sl82c105) */
1297         IDE_HFLAG_SERIALIZE_DMA         = (1 << 27),
1298         /* force host out of "simplex" mode */
1299         IDE_HFLAG_CLEAR_SIMPLEX         = (1 << 28),
1300         /* DSC overlap is unsupported */
1301         IDE_HFLAG_NO_DSC                = (1 << 29),
1302         /* never use 32-bit I/O ops */
1303         IDE_HFLAG_NO_IO_32BIT           = (1 << 30),
1304         /* never unmask IRQs */
1305         IDE_HFLAG_NO_UNMASK_IRQS        = (1 << 31),
1306 };
1307
1308 #ifdef CONFIG_BLK_DEV_OFFBOARD
1309 # define IDE_HFLAG_OFF_BOARD    0
1310 #else
1311 # define IDE_HFLAG_OFF_BOARD    IDE_HFLAG_NON_BOOTABLE
1312 #endif
1313
1314 struct ide_port_info {
1315         char                    *name;
1316
1317         int                     (*init_chipset)(struct pci_dev *);
1318
1319         void                    (*get_lock)(irq_handler_t, void *);
1320         void                    (*release_lock)(void);
1321
1322         void                    (*init_iops)(ide_hwif_t *);
1323         void                    (*init_hwif)(ide_hwif_t *);
1324         int                     (*init_dma)(ide_hwif_t *,
1325                                             const struct ide_port_info *);
1326
1327         const struct ide_tp_ops         *tp_ops;
1328         const struct ide_port_ops       *port_ops;
1329         const struct ide_dma_ops        *dma_ops;
1330
1331         struct ide_pci_enablebit        enablebits[2];
1332
1333         hwif_chipset_t          chipset;
1334
1335         u16                     max_sectors;    /* if < than the default one */
1336
1337         u32                     host_flags;
1338
1339         int                     irq_flags;
1340
1341         u8                      pio_mask;
1342         u8                      swdma_mask;
1343         u8                      mwdma_mask;
1344         u8                      udma_mask;
1345 };
1346
1347 int ide_pci_init_one(struct pci_dev *, const struct ide_port_info *, void *);
1348 int ide_pci_init_two(struct pci_dev *, struct pci_dev *,
1349                      const struct ide_port_info *, void *);
1350 void ide_pci_remove(struct pci_dev *);
1351
1352 #ifdef CONFIG_PM
1353 int ide_pci_suspend(struct pci_dev *, pm_message_t);
1354 int ide_pci_resume(struct pci_dev *);
1355 #else
1356 #define ide_pci_suspend NULL
1357 #define ide_pci_resume NULL
1358 #endif
1359
1360 void ide_map_sg(ide_drive_t *, struct ide_cmd *);
1361 void ide_init_sg_cmd(struct ide_cmd *, unsigned int);
1362
1363 #define BAD_DMA_DRIVE           0
1364 #define GOOD_DMA_DRIVE          1
1365
1366 struct drive_list_entry {
1367         const char *id_model;
1368         const char *id_firmware;
1369 };
1370
1371 int ide_in_drive_list(u16 *, const struct drive_list_entry *);
1372
1373 #ifdef CONFIG_BLK_DEV_IDEDMA
1374 int ide_dma_good_drive(ide_drive_t *);
1375 int __ide_dma_bad_drive(ide_drive_t *);
1376 int ide_id_dma_bug(ide_drive_t *);
1377
1378 u8 ide_find_dma_mode(ide_drive_t *, u8);
1379
1380 static inline u8 ide_max_dma_mode(ide_drive_t *drive)
1381 {
1382         return ide_find_dma_mode(drive, XFER_UDMA_6);
1383 }
1384
1385 void ide_dma_off_quietly(ide_drive_t *);
1386 void ide_dma_off(ide_drive_t *);
1387 void ide_dma_on(ide_drive_t *);
1388 int ide_set_dma(ide_drive_t *);
1389 void ide_check_dma_crc(ide_drive_t *);
1390 ide_startstop_t ide_dma_intr(ide_drive_t *);
1391
1392 int ide_allocate_dma_engine(ide_hwif_t *);
1393 void ide_release_dma_engine(ide_hwif_t *);
1394
1395 int ide_dma_prepare(ide_drive_t *, struct ide_cmd *);
1396 void ide_dma_unmap_sg(ide_drive_t *, struct ide_cmd *);
1397
1398 #ifdef CONFIG_BLK_DEV_IDEDMA_SFF
1399 int config_drive_for_dma(ide_drive_t *);
1400 int ide_build_dmatable(ide_drive_t *, struct ide_cmd *);
1401 void ide_dma_host_set(ide_drive_t *, int);
1402 int ide_dma_setup(ide_drive_t *, struct ide_cmd *);
1403 extern void ide_dma_start(ide_drive_t *);
1404 int ide_dma_end(ide_drive_t *);
1405 int ide_dma_test_irq(ide_drive_t *);
1406 int ide_dma_sff_timer_expiry(ide_drive_t *);
1407 u8 ide_dma_sff_read_status(ide_hwif_t *);
1408 extern const struct ide_dma_ops sff_dma_ops;
1409 #else
1410 static inline int config_drive_for_dma(ide_drive_t *drive) { return 0; }
1411 #endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
1412
1413 void ide_dma_lost_irq(ide_drive_t *);
1414 ide_startstop_t ide_dma_timeout_retry(ide_drive_t *, int);
1415
1416 #else
1417 static inline int ide_id_dma_bug(ide_drive_t *drive) { return 0; }
1418 static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; }
1419 static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
1420 static inline void ide_dma_off_quietly(ide_drive_t *drive) { ; }
1421 static inline void ide_dma_off(ide_drive_t *drive) { ; }
1422 static inline void ide_dma_on(ide_drive_t *drive) { ; }
1423 static inline void ide_dma_verbose(ide_drive_t *drive) { ; }
1424 static inline int ide_set_dma(ide_drive_t *drive) { return 1; }
1425 static inline void ide_check_dma_crc(ide_drive_t *drive) { ; }
1426 static inline ide_startstop_t ide_dma_intr(ide_drive_t *drive) { return ide_stopped; }
1427 static inline ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) { return ide_stopped; }
1428 static inline void ide_release_dma_engine(ide_hwif_t *hwif) { ; }
1429 static inline int ide_dma_prepare(ide_drive_t *drive,
1430                                   struct ide_cmd *cmd) { return 1; }
1431 static inline void ide_dma_unmap_sg(ide_drive_t *drive,
1432                                     struct ide_cmd *cmd) { ; }
1433 #endif /* CONFIG_BLK_DEV_IDEDMA */
1434
1435 #ifdef CONFIG_BLK_DEV_IDEACPI
1436 int ide_acpi_init(void);
1437 extern int ide_acpi_exec_tfs(ide_drive_t *drive);
1438 extern void ide_acpi_get_timing(ide_hwif_t *hwif);
1439 extern void ide_acpi_push_timing(ide_hwif_t *hwif);
1440 void ide_acpi_init_port(ide_hwif_t *);
1441 void ide_acpi_port_init_devices(ide_hwif_t *);
1442 extern void ide_acpi_set_state(ide_hwif_t *hwif, int on);
1443 #else
1444 static inline int ide_acpi_init(void) { return 0; }
1445 static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; }
1446 static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; }
1447 static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; }
1448 static inline void ide_acpi_init_port(ide_hwif_t *hwif) { ; }
1449 static inline void ide_acpi_port_init_devices(ide_hwif_t *hwif) { ; }
1450 static inline void ide_acpi_set_state(ide_hwif_t *hwif, int on) {}
1451 #endif
1452
1453 void ide_register_region(struct gendisk *);
1454 void ide_unregister_region(struct gendisk *);
1455
1456 void ide_check_nien_quirk_list(ide_drive_t *);
1457 void ide_undecoded_slave(ide_drive_t *);
1458
1459 void ide_port_apply_params(ide_hwif_t *);
1460 int ide_sysfs_register_port(ide_hwif_t *);
1461
1462 struct ide_host *ide_host_alloc(const struct ide_port_info *, struct ide_hw **,
1463                                 unsigned int);
1464 void ide_host_free(struct ide_host *);
1465 int ide_host_register(struct ide_host *, const struct ide_port_info *,
1466                       struct ide_hw **);
1467 int ide_host_add(const struct ide_port_info *, struct ide_hw **, unsigned int,
1468                  struct ide_host **);
1469 void ide_host_remove(struct ide_host *);
1470 int ide_legacy_device_add(const struct ide_port_info *, unsigned long);
1471 void ide_port_unregister_devices(ide_hwif_t *);
1472 void ide_port_scan(ide_hwif_t *);
1473
1474 static inline void *ide_get_hwifdata (ide_hwif_t * hwif)
1475 {
1476         return hwif->hwif_data;
1477 }
1478
1479 static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data)
1480 {
1481         hwif->hwif_data = data;
1482 }
1483
1484 extern void ide_toggle_bounce(ide_drive_t *drive, int on);
1485
1486 u64 ide_get_lba_addr(struct ide_cmd *, int);
1487 u8 ide_dump_status(ide_drive_t *, const char *, u8);
1488
1489 struct ide_timing {
1490         u8  mode;
1491         u8  setup;      /* t1 */
1492         u16 act8b;      /* t2 for 8-bit io */
1493         u16 rec8b;      /* t2i for 8-bit io */
1494         u16 cyc8b;      /* t0 for 8-bit io */
1495         u16 active;     /* t2 or tD */
1496         u16 recover;    /* t2i or tK */
1497         u16 cycle;      /* t0 */
1498         u16 udma;       /* t2CYCTYP/2 */
1499 };
1500
1501 enum {
1502         IDE_TIMING_SETUP        = (1 << 0),
1503         IDE_TIMING_ACT8B        = (1 << 1),
1504         IDE_TIMING_REC8B        = (1 << 2),
1505         IDE_TIMING_CYC8B        = (1 << 3),
1506         IDE_TIMING_8BIT         = IDE_TIMING_ACT8B | IDE_TIMING_REC8B |
1507                                   IDE_TIMING_CYC8B,
1508         IDE_TIMING_ACTIVE       = (1 << 4),
1509         IDE_TIMING_RECOVER      = (1 << 5),
1510         IDE_TIMING_CYCLE        = (1 << 6),
1511         IDE_TIMING_UDMA         = (1 << 7),
1512         IDE_TIMING_ALL          = IDE_TIMING_SETUP | IDE_TIMING_8BIT |
1513                                   IDE_TIMING_ACTIVE | IDE_TIMING_RECOVER |
1514                                   IDE_TIMING_CYCLE | IDE_TIMING_UDMA,
1515 };
1516
1517 struct ide_timing *ide_timing_find_mode(u8);
1518 u16 ide_pio_cycle_time(ide_drive_t *, u8);
1519 void ide_timing_merge(struct ide_timing *, struct ide_timing *,
1520                       struct ide_timing *, unsigned int);
1521 int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int);
1522
1523 #ifdef CONFIG_IDE_XFER_MODE
1524 int ide_scan_pio_blacklist(char *);
1525 const char *ide_xfer_verbose(u8);
1526 u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8);
1527 int ide_set_pio_mode(ide_drive_t *, u8);
1528 int ide_set_dma_mode(ide_drive_t *, u8);
1529 void ide_set_pio(ide_drive_t *, u8);
1530 int ide_set_xfer_rate(ide_drive_t *, u8);
1531 #else
1532 static inline void ide_set_pio(ide_drive_t *drive, u8 pio) { ; }
1533 static inline int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) { return -1; }
1534 #endif
1535
1536 static inline void ide_set_max_pio(ide_drive_t *drive)
1537 {
1538         ide_set_pio(drive, 255);
1539 }
1540
1541 char *ide_media_string(ide_drive_t *);
1542
1543 extern struct device_attribute ide_dev_attrs[];
1544 extern struct bus_type ide_bus_type;
1545 extern struct class *ide_port_class;
1546
1547 static inline void ide_dump_identify(u8 *id)
1548 {
1549         print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 2, id, 512, 0);
1550 }
1551
1552 static inline int hwif_to_node(ide_hwif_t *hwif)
1553 {
1554         return hwif->dev ? dev_to_node(hwif->dev) : -1;
1555 }
1556
1557 static inline ide_drive_t *ide_get_pair_dev(ide_drive_t *drive)
1558 {
1559         ide_drive_t *peer = drive->hwif->devices[(drive->dn ^ 1) & 1];
1560
1561         return (peer->dev_flags & IDE_DFLAG_PRESENT) ? peer : NULL;
1562 }
1563
1564 #define ide_port_for_each_dev(i, dev, port) \
1565         for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++)
1566
1567 #define ide_port_for_each_present_dev(i, dev, port) \
1568         for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++) \
1569                 if ((dev)->dev_flags & IDE_DFLAG_PRESENT)
1570
1571 #define ide_host_for_each_port(i, port, host) \
1572         for ((i) = 0; ((port) = (host)->ports[i]) || (i) < MAX_HOST_PORTS; (i)++)
1573
1574 #endif /* _IDE_H */