x86: apply missing DMA/OOM prevention to floppy_32.h
[safe/jmp/linux-2.6] / include / asm-x86 / io_apic_32.h
1 #ifndef __ASM_IO_APIC_H
2 #define __ASM_IO_APIC_H
3
4 #include <asm/types.h>
5 #include <asm/mpspec.h>
6 #include <asm/apicdef.h>
7
8 /*
9  * Intel IO-APIC support for SMP and UP systems.
10  *
11  * Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar
12  */
13
14 /*
15  * The structure of the IO-APIC:
16  */
17 union IO_APIC_reg_00 {
18         u32     raw;
19         struct {
20                 u32     __reserved_2    : 14,
21                         LTS             :  1,
22                         delivery_type   :  1,
23                         __reserved_1    :  8,
24                         ID              :  8;
25         } __attribute__ ((packed)) bits;
26 };
27
28 union IO_APIC_reg_01 {
29         u32     raw;
30         struct {
31                 u32     version         :  8,
32                         __reserved_2    :  7,
33                         PRQ             :  1,
34                         entries         :  8,
35                         __reserved_1    :  8;
36         } __attribute__ ((packed)) bits;
37 };
38
39 union IO_APIC_reg_02 {
40         u32     raw;
41         struct {
42                 u32     __reserved_2    : 24,
43                         arbitration     :  4,
44                         __reserved_1    :  4;
45         } __attribute__ ((packed)) bits;
46 };
47
48 union IO_APIC_reg_03 {
49         u32     raw;
50         struct {
51                 u32     boot_DT         :  1,
52                         __reserved_1    : 31;
53         } __attribute__ ((packed)) bits;
54 };
55
56 enum ioapic_irq_destination_types {
57         dest_Fixed = 0,
58         dest_LowestPrio = 1,
59         dest_SMI = 2,
60         dest__reserved_1 = 3,
61         dest_NMI = 4,
62         dest_INIT = 5,
63         dest__reserved_2 = 6,
64         dest_ExtINT = 7
65 };
66
67 struct IO_APIC_route_entry {
68         __u32   vector          :  8,
69                 delivery_mode   :  3,   /* 000: FIXED
70                                          * 001: lowest prio
71                                          * 111: ExtINT
72                                          */
73                 dest_mode       :  1,   /* 0: physical, 1: logical */
74                 delivery_status :  1,
75                 polarity        :  1,
76                 irr             :  1,
77                 trigger         :  1,   /* 0: edge, 1: level */
78                 mask            :  1,   /* 0: enabled, 1: disabled */
79                 __reserved_2    : 15;
80
81         union {         struct { __u32
82                                         __reserved_1    : 24,
83                                         physical_dest   :  4,
84                                         __reserved_2    :  4;
85                         } physical;
86
87                         struct { __u32
88                                         __reserved_1    : 24,
89                                         logical_dest    :  8;
90                         } logical;
91         } dest;
92
93 } __attribute__ ((packed));
94
95 #ifdef CONFIG_X86_IO_APIC
96
97 /*
98  * # of IO-APICs and # of IRQ routing registers
99  */
100 extern int nr_ioapics;
101 extern int nr_ioapic_registers[MAX_IO_APICS];
102
103 /*
104  * MP-BIOS irq configuration table structures:
105  */
106
107 /* I/O APIC entries */
108 extern struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
109
110 /* # of MP IRQ source entries */
111 extern int mp_irq_entries;
112
113 /* MP IRQ source entries */
114 extern struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
115
116 /* non-0 if default (table-less) MP configuration */
117 extern int mpc_default_type;
118
119 /* Older SiS APIC requires we rewrite the index register */
120 extern int sis_apic_bug;
121
122 /* 1 if "noapic" boot option passed */
123 extern int skip_ioapic_setup;
124
125 static inline void disable_ioapic_setup(void)
126 {
127         skip_ioapic_setup = 1;
128 }
129
130 static inline int ioapic_setup_disabled(void)
131 {
132         return skip_ioapic_setup;
133 }
134
135 /*
136  * If we use the IO-APIC for IRQ routing, disable automatic
137  * assignment of PCI IRQ's.
138  */
139 #define io_apic_assign_pci_irqs (mp_irq_entries && !skip_ioapic_setup && io_apic_irqs)
140
141 #ifdef CONFIG_ACPI
142 extern int io_apic_get_unique_id (int ioapic, int apic_id);
143 extern int io_apic_get_version (int ioapic);
144 extern int io_apic_get_redir_entries (int ioapic);
145 extern int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low);
146 extern int timer_uses_ioapic_pin_0;
147 #endif /* CONFIG_ACPI */
148
149 extern int (*ioapic_renumber_irq)(int ioapic, int irq);
150
151 #else  /* !CONFIG_X86_IO_APIC */
152 #define io_apic_assign_pci_irqs 0
153 #endif
154
155 #endif