IB/ipath: Fix time comparison to use time_after_eq()
[safe/jmp/linux-2.6] / include / asm-powerpc / cpm2.h
1 /*
2  * Communication Processor Module v2.
3  *
4  * This file contains structures and information for the communication
5  * processor channels found in the dual port RAM or parameter RAM.
6  * All CPM control and status is available through the CPM2 internal
7  * memory map.  See immap_cpm2.h for details.
8  */
9 #ifdef __KERNEL__
10 #ifndef __CPM2__
11 #define __CPM2__
12
13 #include <asm/immap_cpm2.h>
14 #include <asm/cpm.h>
15
16 #ifdef CONFIG_PPC_85xx
17 #define CPM_MAP_ADDR (get_immrbase() + 0x80000)
18 #endif
19
20 /* CPM Command register.
21 */
22 #define CPM_CR_RST      ((uint)0x80000000)
23 #define CPM_CR_PAGE     ((uint)0x7c000000)
24 #define CPM_CR_SBLOCK   ((uint)0x03e00000)
25 #define CPM_CR_FLG      ((uint)0x00010000)
26 #define CPM_CR_MCN      ((uint)0x00003fc0)
27 #define CPM_CR_OPCODE   ((uint)0x0000000f)
28
29 /* Device sub-block and page codes.
30 */
31 #define CPM_CR_SCC1_SBLOCK      (0x04)
32 #define CPM_CR_SCC2_SBLOCK      (0x05)
33 #define CPM_CR_SCC3_SBLOCK      (0x06)
34 #define CPM_CR_SCC4_SBLOCK      (0x07)
35 #define CPM_CR_SMC1_SBLOCK      (0x08)
36 #define CPM_CR_SMC2_SBLOCK      (0x09)
37 #define CPM_CR_SPI_SBLOCK       (0x0a)
38 #define CPM_CR_I2C_SBLOCK       (0x0b)
39 #define CPM_CR_TIMER_SBLOCK     (0x0f)
40 #define CPM_CR_RAND_SBLOCK      (0x0e)
41 #define CPM_CR_FCC1_SBLOCK      (0x10)
42 #define CPM_CR_FCC2_SBLOCK      (0x11)
43 #define CPM_CR_FCC3_SBLOCK      (0x12)
44 #define CPM_CR_IDMA1_SBLOCK     (0x14)
45 #define CPM_CR_IDMA2_SBLOCK     (0x15)
46 #define CPM_CR_IDMA3_SBLOCK     (0x16)
47 #define CPM_CR_IDMA4_SBLOCK     (0x17)
48 #define CPM_CR_MCC1_SBLOCK      (0x1c)
49
50 #define CPM_CR_FCC_SBLOCK(x)    (x + 0x10)
51
52 #define CPM_CR_SCC1_PAGE        (0x00)
53 #define CPM_CR_SCC2_PAGE        (0x01)
54 #define CPM_CR_SCC3_PAGE        (0x02)
55 #define CPM_CR_SCC4_PAGE        (0x03)
56 #define CPM_CR_SMC1_PAGE        (0x07)
57 #define CPM_CR_SMC2_PAGE        (0x08)
58 #define CPM_CR_SPI_PAGE         (0x09)
59 #define CPM_CR_I2C_PAGE         (0x0a)
60 #define CPM_CR_TIMER_PAGE       (0x0a)
61 #define CPM_CR_RAND_PAGE        (0x0a)
62 #define CPM_CR_FCC1_PAGE        (0x04)
63 #define CPM_CR_FCC2_PAGE        (0x05)
64 #define CPM_CR_FCC3_PAGE        (0x06)
65 #define CPM_CR_IDMA1_PAGE       (0x07)
66 #define CPM_CR_IDMA2_PAGE       (0x08)
67 #define CPM_CR_IDMA3_PAGE       (0x09)
68 #define CPM_CR_IDMA4_PAGE       (0x0a)
69 #define CPM_CR_MCC1_PAGE        (0x07)
70 #define CPM_CR_MCC2_PAGE        (0x08)
71
72 #define CPM_CR_FCC_PAGE(x)      (x + 0x04)
73
74 /* Some opcodes (there are more...later)
75 */
76 #define CPM_CR_INIT_TRX         ((ushort)0x0000)
77 #define CPM_CR_INIT_RX          ((ushort)0x0001)
78 #define CPM_CR_INIT_TX          ((ushort)0x0002)
79 #define CPM_CR_HUNT_MODE        ((ushort)0x0003)
80 #define CPM_CR_STOP_TX          ((ushort)0x0004)
81 #define CPM_CR_GRA_STOP_TX      ((ushort)0x0005)
82 #define CPM_CR_RESTART_TX       ((ushort)0x0006)
83 #define CPM_CR_SET_GADDR        ((ushort)0x0008)
84 #define CPM_CR_START_IDMA       ((ushort)0x0009)
85 #define CPM_CR_STOP_IDMA        ((ushort)0x000b)
86
87 #define mk_cr_cmd(PG, SBC, MCN, OP) \
88         ((PG << 26) | (SBC << 21) | (MCN << 6) | OP)
89
90 #ifndef CONFIG_PPC_CPM_NEW_BINDING
91 /* Dual Port RAM addresses.  The first 16K is available for almost
92  * any CPM use, so we put the BDs there.  The first 128 bytes are
93  * used for SMC1 and SMC2 parameter RAM, so we start allocating
94  * BDs above that.  All of this must change when we start
95  * downloading RAM microcode.
96  */
97 #define CPM_DATAONLY_BASE       ((uint)128)
98 #define CPM_DP_NOSPACE          ((uint)0x7fffffff)
99 #if defined(CONFIG_8272) || defined(CONFIG_MPC8555)
100 #define CPM_DATAONLY_SIZE       ((uint)(8 * 1024) - CPM_DATAONLY_BASE)
101 #define CPM_FCC_SPECIAL_BASE    ((uint)0x00009000)
102 #else
103 #define CPM_DATAONLY_SIZE       ((uint)(16 * 1024) - CPM_DATAONLY_BASE)
104 #define CPM_FCC_SPECIAL_BASE    ((uint)0x0000b000)
105 #endif
106 #endif
107
108 /* The number of pages of host memory we allocate for CPM.  This is
109  * done early in kernel initialization to get physically contiguous
110  * pages.
111  */
112 #define NUM_CPM_HOST_PAGES      2
113
114 /* Export the base address of the communication processor registers
115  * and dual port ram.
116  */
117 extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */
118
119 #ifdef CONFIG_PPC_CPM_NEW_BINDING
120 #define cpm_dpalloc cpm_muram_alloc
121 #define cpm_dpfree cpm_muram_free
122 #define cpm_dpram_addr cpm_muram_addr
123 #else
124 extern unsigned long cpm_dpalloc(uint size, uint align);
125 extern int cpm_dpfree(unsigned long offset);
126 extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align);
127 extern void cpm_dpdump(void);
128 extern void *cpm_dpram_addr(unsigned long offset);
129 #endif
130
131 extern void cpm_setbrg(uint brg, uint rate);
132 extern void cpm2_fastbrg(uint brg, uint rate, int div16);
133 extern void cpm2_reset(void);
134
135 /* Function code bits, usually generic to devices.
136 */
137 #define CPMFCR_GBL      ((u_char)0x20)  /* Set memory snooping */
138 #define CPMFCR_EB       ((u_char)0x10)  /* Set big endian byte order */
139 #define CPMFCR_TC2      ((u_char)0x04)  /* Transfer code 2 value */
140 #define CPMFCR_DTB      ((u_char)0x02)  /* Use local bus for data when set */
141 #define CPMFCR_BDB      ((u_char)0x01)  /* Use local bus for BD when set */
142
143 /* Parameter RAM offsets from the base.
144 */
145 #define PROFF_SCC1              ((uint)0x8000)
146 #define PROFF_SCC2              ((uint)0x8100)
147 #define PROFF_SCC3              ((uint)0x8200)
148 #define PROFF_SCC4              ((uint)0x8300)
149 #define PROFF_FCC1              ((uint)0x8400)
150 #define PROFF_FCC2              ((uint)0x8500)
151 #define PROFF_FCC3              ((uint)0x8600)
152 #define PROFF_MCC1              ((uint)0x8700)
153 #define PROFF_SMC1_BASE         ((uint)0x87fc)
154 #define PROFF_IDMA1_BASE        ((uint)0x87fe)
155 #define PROFF_MCC2              ((uint)0x8800)
156 #define PROFF_SMC2_BASE         ((uint)0x88fc)
157 #define PROFF_IDMA2_BASE        ((uint)0x88fe)
158 #define PROFF_SPI_BASE          ((uint)0x89fc)
159 #define PROFF_IDMA3_BASE        ((uint)0x89fe)
160 #define PROFF_TIMERS            ((uint)0x8ae0)
161 #define PROFF_REVNUM            ((uint)0x8af0)
162 #define PROFF_RAND              ((uint)0x8af8)
163 #define PROFF_I2C_BASE          ((uint)0x8afc)
164 #define PROFF_IDMA4_BASE        ((uint)0x8afe)
165
166 #define PROFF_SCC_SIZE          ((uint)0x100)
167 #define PROFF_FCC_SIZE          ((uint)0x100)
168 #define PROFF_SMC_SIZE          ((uint)64)
169
170 /* The SMCs are relocated to any of the first eight DPRAM pages.
171  * We will fix these at the first locations of DPRAM, until we
172  * get some microcode patches :-).
173  * The parameter ram space for the SMCs is fifty-some bytes, and
174  * they are required to start on a 64 byte boundary.
175  */
176 #define PROFF_SMC1      (0)
177 #define PROFF_SMC2      (64)
178
179
180 /* Define enough so I can at least use the serial port as a UART.
181  */
182 typedef struct smc_uart {
183         ushort  smc_rbase;      /* Rx Buffer descriptor base address */
184         ushort  smc_tbase;      /* Tx Buffer descriptor base address */
185         u_char  smc_rfcr;       /* Rx function code */
186         u_char  smc_tfcr;       /* Tx function code */
187         ushort  smc_mrblr;      /* Max receive buffer length */
188         uint    smc_rstate;     /* Internal */
189         uint    smc_idp;        /* Internal */
190         ushort  smc_rbptr;      /* Internal */
191         ushort  smc_ibc;        /* Internal */
192         uint    smc_rxtmp;      /* Internal */
193         uint    smc_tstate;     /* Internal */
194         uint    smc_tdp;        /* Internal */
195         ushort  smc_tbptr;      /* Internal */
196         ushort  smc_tbc;        /* Internal */
197         uint    smc_txtmp;      /* Internal */
198         ushort  smc_maxidl;     /* Maximum idle characters */
199         ushort  smc_tmpidl;     /* Temporary idle counter */
200         ushort  smc_brklen;     /* Last received break length */
201         ushort  smc_brkec;      /* rcv'd break condition counter */
202         ushort  smc_brkcr;      /* xmt break count register */
203         ushort  smc_rmask;      /* Temporary bit mask */
204         uint    smc_stmp;       /* SDMA Temp */
205 } smc_uart_t;
206
207 /* SMC uart mode register (Internal memory map).
208 */
209 #define SMCMR_REN       ((ushort)0x0001)
210 #define SMCMR_TEN       ((ushort)0x0002)
211 #define SMCMR_DM        ((ushort)0x000c)
212 #define SMCMR_SM_GCI    ((ushort)0x0000)
213 #define SMCMR_SM_UART   ((ushort)0x0020)
214 #define SMCMR_SM_TRANS  ((ushort)0x0030)
215 #define SMCMR_SM_MASK   ((ushort)0x0030)
216 #define SMCMR_PM_EVEN   ((ushort)0x0100)        /* Even parity, else odd */
217 #define SMCMR_REVD      SMCMR_PM_EVEN
218 #define SMCMR_PEN       ((ushort)0x0200)        /* Parity enable */
219 #define SMCMR_BS        SMCMR_PEN
220 #define SMCMR_SL        ((ushort)0x0400)        /* Two stops, else one */
221 #define SMCR_CLEN_MASK  ((ushort)0x7800)        /* Character length */
222 #define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
223
224 /* SMC Event and Mask register.
225 */
226 #define SMCM_BRKE       ((unsigned char)0x40)   /* When in UART Mode */
227 #define SMCM_BRK        ((unsigned char)0x10)   /* When in UART Mode */
228 #define SMCM_TXE        ((unsigned char)0x10)
229 #define SMCM_BSY        ((unsigned char)0x04)
230 #define SMCM_TX         ((unsigned char)0x02)
231 #define SMCM_RX         ((unsigned char)0x01)
232
233 /* Baud rate generators.
234 */
235 #define CPM_BRG_RST             ((uint)0x00020000)
236 #define CPM_BRG_EN              ((uint)0x00010000)
237 #define CPM_BRG_EXTC_INT        ((uint)0x00000000)
238 #define CPM_BRG_EXTC_CLK3_9     ((uint)0x00004000)
239 #define CPM_BRG_EXTC_CLK5_15    ((uint)0x00008000)
240 #define CPM_BRG_ATB             ((uint)0x00002000)
241 #define CPM_BRG_CD_MASK         ((uint)0x00001ffe)
242 #define CPM_BRG_DIV16           ((uint)0x00000001)
243
244 /* SCCs.
245 */
246 #define SCC_GSMRH_IRP           ((uint)0x00040000)
247 #define SCC_GSMRH_GDE           ((uint)0x00010000)
248 #define SCC_GSMRH_TCRC_CCITT    ((uint)0x00008000)
249 #define SCC_GSMRH_TCRC_BISYNC   ((uint)0x00004000)
250 #define SCC_GSMRH_TCRC_HDLC     ((uint)0x00000000)
251 #define SCC_GSMRH_REVD          ((uint)0x00002000)
252 #define SCC_GSMRH_TRX           ((uint)0x00001000)
253 #define SCC_GSMRH_TTX           ((uint)0x00000800)
254 #define SCC_GSMRH_CDP           ((uint)0x00000400)
255 #define SCC_GSMRH_CTSP          ((uint)0x00000200)
256 #define SCC_GSMRH_CDS           ((uint)0x00000100)
257 #define SCC_GSMRH_CTSS          ((uint)0x00000080)
258 #define SCC_GSMRH_TFL           ((uint)0x00000040)
259 #define SCC_GSMRH_RFW           ((uint)0x00000020)
260 #define SCC_GSMRH_TXSY          ((uint)0x00000010)
261 #define SCC_GSMRH_SYNL16        ((uint)0x0000000c)
262 #define SCC_GSMRH_SYNL8         ((uint)0x00000008)
263 #define SCC_GSMRH_SYNL4         ((uint)0x00000004)
264 #define SCC_GSMRH_RTSM          ((uint)0x00000002)
265 #define SCC_GSMRH_RSYN          ((uint)0x00000001)
266
267 #define SCC_GSMRL_SIR           ((uint)0x80000000)      /* SCC2 only */
268 #define SCC_GSMRL_EDGE_NONE     ((uint)0x60000000)
269 #define SCC_GSMRL_EDGE_NEG      ((uint)0x40000000)
270 #define SCC_GSMRL_EDGE_POS      ((uint)0x20000000)
271 #define SCC_GSMRL_EDGE_BOTH     ((uint)0x00000000)
272 #define SCC_GSMRL_TCI           ((uint)0x10000000)
273 #define SCC_GSMRL_TSNC_3        ((uint)0x0c000000)
274 #define SCC_GSMRL_TSNC_4        ((uint)0x08000000)
275 #define SCC_GSMRL_TSNC_14       ((uint)0x04000000)
276 #define SCC_GSMRL_TSNC_INF      ((uint)0x00000000)
277 #define SCC_GSMRL_RINV          ((uint)0x02000000)
278 #define SCC_GSMRL_TINV          ((uint)0x01000000)
279 #define SCC_GSMRL_TPL_128       ((uint)0x00c00000)
280 #define SCC_GSMRL_TPL_64        ((uint)0x00a00000)
281 #define SCC_GSMRL_TPL_48        ((uint)0x00800000)
282 #define SCC_GSMRL_TPL_32        ((uint)0x00600000)
283 #define SCC_GSMRL_TPL_16        ((uint)0x00400000)
284 #define SCC_GSMRL_TPL_8         ((uint)0x00200000)
285 #define SCC_GSMRL_TPL_NONE      ((uint)0x00000000)
286 #define SCC_GSMRL_TPP_ALL1      ((uint)0x00180000)
287 #define SCC_GSMRL_TPP_01        ((uint)0x00100000)
288 #define SCC_GSMRL_TPP_10        ((uint)0x00080000)
289 #define SCC_GSMRL_TPP_ZEROS     ((uint)0x00000000)
290 #define SCC_GSMRL_TEND          ((uint)0x00040000)
291 #define SCC_GSMRL_TDCR_32       ((uint)0x00030000)
292 #define SCC_GSMRL_TDCR_16       ((uint)0x00020000)
293 #define SCC_GSMRL_TDCR_8        ((uint)0x00010000)
294 #define SCC_GSMRL_TDCR_1        ((uint)0x00000000)
295 #define SCC_GSMRL_RDCR_32       ((uint)0x0000c000)
296 #define SCC_GSMRL_RDCR_16       ((uint)0x00008000)
297 #define SCC_GSMRL_RDCR_8        ((uint)0x00004000)
298 #define SCC_GSMRL_RDCR_1        ((uint)0x00000000)
299 #define SCC_GSMRL_RENC_DFMAN    ((uint)0x00003000)
300 #define SCC_GSMRL_RENC_MANCH    ((uint)0x00002000)
301 #define SCC_GSMRL_RENC_FM0      ((uint)0x00001000)
302 #define SCC_GSMRL_RENC_NRZI     ((uint)0x00000800)
303 #define SCC_GSMRL_RENC_NRZ      ((uint)0x00000000)
304 #define SCC_GSMRL_TENC_DFMAN    ((uint)0x00000600)
305 #define SCC_GSMRL_TENC_MANCH    ((uint)0x00000400)
306 #define SCC_GSMRL_TENC_FM0      ((uint)0x00000200)
307 #define SCC_GSMRL_TENC_NRZI     ((uint)0x00000100)
308 #define SCC_GSMRL_TENC_NRZ      ((uint)0x00000000)
309 #define SCC_GSMRL_DIAG_LE       ((uint)0x000000c0)      /* Loop and echo */
310 #define SCC_GSMRL_DIAG_ECHO     ((uint)0x00000080)
311 #define SCC_GSMRL_DIAG_LOOP     ((uint)0x00000040)
312 #define SCC_GSMRL_DIAG_NORM     ((uint)0x00000000)
313 #define SCC_GSMRL_ENR           ((uint)0x00000020)
314 #define SCC_GSMRL_ENT           ((uint)0x00000010)
315 #define SCC_GSMRL_MODE_ENET     ((uint)0x0000000c)
316 #define SCC_GSMRL_MODE_DDCMP    ((uint)0x00000009)
317 #define SCC_GSMRL_MODE_BISYNC   ((uint)0x00000008)
318 #define SCC_GSMRL_MODE_V14      ((uint)0x00000007)
319 #define SCC_GSMRL_MODE_AHDLC    ((uint)0x00000006)
320 #define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
321 #define SCC_GSMRL_MODE_UART     ((uint)0x00000004)
322 #define SCC_GSMRL_MODE_SS7      ((uint)0x00000003)
323 #define SCC_GSMRL_MODE_ATALK    ((uint)0x00000002)
324 #define SCC_GSMRL_MODE_HDLC     ((uint)0x00000000)
325
326 #define SCC_TODR_TOD            ((ushort)0x8000)
327
328 /* SCC Event and Mask register.
329 */
330 #define SCCM_TXE        ((unsigned char)0x10)
331 #define SCCM_BSY        ((unsigned char)0x04)
332 #define SCCM_TX         ((unsigned char)0x02)
333 #define SCCM_RX         ((unsigned char)0x01)
334
335 typedef struct scc_param {
336         ushort  scc_rbase;      /* Rx Buffer descriptor base address */
337         ushort  scc_tbase;      /* Tx Buffer descriptor base address */
338         u_char  scc_rfcr;       /* Rx function code */
339         u_char  scc_tfcr;       /* Tx function code */
340         ushort  scc_mrblr;      /* Max receive buffer length */
341         uint    scc_rstate;     /* Internal */
342         uint    scc_idp;        /* Internal */
343         ushort  scc_rbptr;      /* Internal */
344         ushort  scc_ibc;        /* Internal */
345         uint    scc_rxtmp;      /* Internal */
346         uint    scc_tstate;     /* Internal */
347         uint    scc_tdp;        /* Internal */
348         ushort  scc_tbptr;      /* Internal */
349         ushort  scc_tbc;        /* Internal */
350         uint    scc_txtmp;      /* Internal */
351         uint    scc_rcrc;       /* Internal */
352         uint    scc_tcrc;       /* Internal */
353 } sccp_t;
354
355 /* CPM Ethernet through SCC1.
356  */
357 typedef struct scc_enet {
358         sccp_t  sen_genscc;
359         uint    sen_cpres;      /* Preset CRC */
360         uint    sen_cmask;      /* Constant mask for CRC */
361         uint    sen_crcec;      /* CRC Error counter */
362         uint    sen_alec;       /* alignment error counter */
363         uint    sen_disfc;      /* discard frame counter */
364         ushort  sen_pads;       /* Tx short frame pad character */
365         ushort  sen_retlim;     /* Retry limit threshold */
366         ushort  sen_retcnt;     /* Retry limit counter */
367         ushort  sen_maxflr;     /* maximum frame length register */
368         ushort  sen_minflr;     /* minimum frame length register */
369         ushort  sen_maxd1;      /* maximum DMA1 length */
370         ushort  sen_maxd2;      /* maximum DMA2 length */
371         ushort  sen_maxd;       /* Rx max DMA */
372         ushort  sen_dmacnt;     /* Rx DMA counter */
373         ushort  sen_maxb;       /* Max BD byte count */
374         ushort  sen_gaddr1;     /* Group address filter */
375         ushort  sen_gaddr2;
376         ushort  sen_gaddr3;
377         ushort  sen_gaddr4;
378         uint    sen_tbuf0data0; /* Save area 0 - current frame */
379         uint    sen_tbuf0data1; /* Save area 1 - current frame */
380         uint    sen_tbuf0rba;   /* Internal */
381         uint    sen_tbuf0crc;   /* Internal */
382         ushort  sen_tbuf0bcnt;  /* Internal */
383         ushort  sen_paddrh;     /* physical address (MSB) */
384         ushort  sen_paddrm;
385         ushort  sen_paddrl;     /* physical address (LSB) */
386         ushort  sen_pper;       /* persistence */
387         ushort  sen_rfbdptr;    /* Rx first BD pointer */
388         ushort  sen_tfbdptr;    /* Tx first BD pointer */
389         ushort  sen_tlbdptr;    /* Tx last BD pointer */
390         uint    sen_tbuf1data0; /* Save area 0 - current frame */
391         uint    sen_tbuf1data1; /* Save area 1 - current frame */
392         uint    sen_tbuf1rba;   /* Internal */
393         uint    sen_tbuf1crc;   /* Internal */
394         ushort  sen_tbuf1bcnt;  /* Internal */
395         ushort  sen_txlen;      /* Tx Frame length counter */
396         ushort  sen_iaddr1;     /* Individual address filter */
397         ushort  sen_iaddr2;
398         ushort  sen_iaddr3;
399         ushort  sen_iaddr4;
400         ushort  sen_boffcnt;    /* Backoff counter */
401
402         /* NOTE: Some versions of the manual have the following items
403          * incorrectly documented.  Below is the proper order.
404          */
405         ushort  sen_taddrh;     /* temp address (MSB) */
406         ushort  sen_taddrm;
407         ushort  sen_taddrl;     /* temp address (LSB) */
408 } scc_enet_t;
409
410
411 /* SCC Event register as used by Ethernet.
412 */
413 #define SCCE_ENET_GRA   ((ushort)0x0080)        /* Graceful stop complete */
414 #define SCCE_ENET_TXE   ((ushort)0x0010)        /* Transmit Error */
415 #define SCCE_ENET_RXF   ((ushort)0x0008)        /* Full frame received */
416 #define SCCE_ENET_BSY   ((ushort)0x0004)        /* All incoming buffers full */
417 #define SCCE_ENET_TXB   ((ushort)0x0002)        /* A buffer was transmitted */
418 #define SCCE_ENET_RXB   ((ushort)0x0001)        /* A buffer was received */
419
420 /* SCC Mode Register (PSMR) as used by Ethernet.
421 */
422 #define SCC_PSMR_HBC    ((ushort)0x8000)        /* Enable heartbeat */
423 #define SCC_PSMR_FC     ((ushort)0x4000)        /* Force collision */
424 #define SCC_PSMR_RSH    ((ushort)0x2000)        /* Receive short frames */
425 #define SCC_PSMR_IAM    ((ushort)0x1000)        /* Check individual hash */
426 #define SCC_PSMR_ENCRC  ((ushort)0x0800)        /* Ethernet CRC mode */
427 #define SCC_PSMR_PRO    ((ushort)0x0200)        /* Promiscuous mode */
428 #define SCC_PSMR_BRO    ((ushort)0x0100)        /* Catch broadcast pkts */
429 #define SCC_PSMR_SBT    ((ushort)0x0080)        /* Special backoff timer */
430 #define SCC_PSMR_LPB    ((ushort)0x0040)        /* Set Loopback mode */
431 #define SCC_PSMR_SIP    ((ushort)0x0020)        /* Sample Input Pins */
432 #define SCC_PSMR_LCW    ((ushort)0x0010)        /* Late collision window */
433 #define SCC_PSMR_NIB22  ((ushort)0x000a)        /* Start frame search */
434 #define SCC_PSMR_FDE    ((ushort)0x0001)        /* Full duplex enable */
435
436 /* SCC as UART
437 */
438 typedef struct scc_uart {
439         sccp_t  scc_genscc;
440         uint    scc_res1;       /* Reserved */
441         uint    scc_res2;       /* Reserved */
442         ushort  scc_maxidl;     /* Maximum idle chars */
443         ushort  scc_idlc;       /* temp idle counter */
444         ushort  scc_brkcr;      /* Break count register */
445         ushort  scc_parec;      /* receive parity error counter */
446         ushort  scc_frmec;      /* receive framing error counter */
447         ushort  scc_nosec;      /* receive noise counter */
448         ushort  scc_brkec;      /* receive break condition counter */
449         ushort  scc_brkln;      /* last received break length */
450         ushort  scc_uaddr1;     /* UART address character 1 */
451         ushort  scc_uaddr2;     /* UART address character 2 */
452         ushort  scc_rtemp;      /* Temp storage */
453         ushort  scc_toseq;      /* Transmit out of sequence char */
454         ushort  scc_char1;      /* control character 1 */
455         ushort  scc_char2;      /* control character 2 */
456         ushort  scc_char3;      /* control character 3 */
457         ushort  scc_char4;      /* control character 4 */
458         ushort  scc_char5;      /* control character 5 */
459         ushort  scc_char6;      /* control character 6 */
460         ushort  scc_char7;      /* control character 7 */
461         ushort  scc_char8;      /* control character 8 */
462         ushort  scc_rccm;       /* receive control character mask */
463         ushort  scc_rccr;       /* receive control character register */
464         ushort  scc_rlbc;       /* receive last break character */
465 } scc_uart_t;
466
467 /* SCC Event and Mask registers when it is used as a UART.
468 */
469 #define UART_SCCM_GLR           ((ushort)0x1000)
470 #define UART_SCCM_GLT           ((ushort)0x0800)
471 #define UART_SCCM_AB            ((ushort)0x0200)
472 #define UART_SCCM_IDL           ((ushort)0x0100)
473 #define UART_SCCM_GRA           ((ushort)0x0080)
474 #define UART_SCCM_BRKE          ((ushort)0x0040)
475 #define UART_SCCM_BRKS          ((ushort)0x0020)
476 #define UART_SCCM_CCR           ((ushort)0x0008)
477 #define UART_SCCM_BSY           ((ushort)0x0004)
478 #define UART_SCCM_TX            ((ushort)0x0002)
479 #define UART_SCCM_RX            ((ushort)0x0001)
480
481 /* The SCC PSMR when used as a UART.
482 */
483 #define SCU_PSMR_FLC            ((ushort)0x8000)
484 #define SCU_PSMR_SL             ((ushort)0x4000)
485 #define SCU_PSMR_CL             ((ushort)0x3000)
486 #define SCU_PSMR_UM             ((ushort)0x0c00)
487 #define SCU_PSMR_FRZ            ((ushort)0x0200)
488 #define SCU_PSMR_RZS            ((ushort)0x0100)
489 #define SCU_PSMR_SYN            ((ushort)0x0080)
490 #define SCU_PSMR_DRT            ((ushort)0x0040)
491 #define SCU_PSMR_PEN            ((ushort)0x0010)
492 #define SCU_PSMR_RPM            ((ushort)0x000c)
493 #define SCU_PSMR_REVP           ((ushort)0x0008)
494 #define SCU_PSMR_TPM            ((ushort)0x0003)
495 #define SCU_PSMR_TEVP           ((ushort)0x0002)
496
497 /* CPM Transparent mode SCC.
498  */
499 typedef struct scc_trans {
500         sccp_t  st_genscc;
501         uint    st_cpres;       /* Preset CRC */
502         uint    st_cmask;       /* Constant mask for CRC */
503 } scc_trans_t;
504
505 /* How about some FCCs.....
506 */
507 #define FCC_GFMR_DIAG_NORM      ((uint)0x00000000)
508 #define FCC_GFMR_DIAG_LE        ((uint)0x40000000)
509 #define FCC_GFMR_DIAG_AE        ((uint)0x80000000)
510 #define FCC_GFMR_DIAG_ALE       ((uint)0xc0000000)
511 #define FCC_GFMR_TCI            ((uint)0x20000000)
512 #define FCC_GFMR_TRX            ((uint)0x10000000)
513 #define FCC_GFMR_TTX            ((uint)0x08000000)
514 #define FCC_GFMR_TTX            ((uint)0x08000000)
515 #define FCC_GFMR_CDP            ((uint)0x04000000)
516 #define FCC_GFMR_CTSP           ((uint)0x02000000)
517 #define FCC_GFMR_CDS            ((uint)0x01000000)
518 #define FCC_GFMR_CTSS           ((uint)0x00800000)
519 #define FCC_GFMR_SYNL_NONE      ((uint)0x00000000)
520 #define FCC_GFMR_SYNL_AUTO      ((uint)0x00004000)
521 #define FCC_GFMR_SYNL_8         ((uint)0x00008000)
522 #define FCC_GFMR_SYNL_16        ((uint)0x0000c000)
523 #define FCC_GFMR_RTSM           ((uint)0x00002000)
524 #define FCC_GFMR_RENC_NRZ       ((uint)0x00000000)
525 #define FCC_GFMR_RENC_NRZI      ((uint)0x00000800)
526 #define FCC_GFMR_REVD           ((uint)0x00000400)
527 #define FCC_GFMR_TENC_NRZ       ((uint)0x00000000)
528 #define FCC_GFMR_TENC_NRZI      ((uint)0x00000100)
529 #define FCC_GFMR_TCRC_16        ((uint)0x00000000)
530 #define FCC_GFMR_TCRC_32        ((uint)0x00000080)
531 #define FCC_GFMR_ENR            ((uint)0x00000020)
532 #define FCC_GFMR_ENT            ((uint)0x00000010)
533 #define FCC_GFMR_MODE_ENET      ((uint)0x0000000c)
534 #define FCC_GFMR_MODE_ATM       ((uint)0x0000000a)
535 #define FCC_GFMR_MODE_HDLC      ((uint)0x00000000)
536
537 /* Generic FCC parameter ram.
538 */
539 typedef struct fcc_param {
540         ushort  fcc_riptr;      /* Rx Internal temp pointer */
541         ushort  fcc_tiptr;      /* Tx Internal temp pointer */
542         ushort  fcc_res1;
543         ushort  fcc_mrblr;      /* Max receive buffer length, mod 32 bytes */
544         uint    fcc_rstate;     /* Upper byte is Func code, must be set */
545         uint    fcc_rbase;      /* Receive BD base */
546         ushort  fcc_rbdstat;    /* RxBD status */
547         ushort  fcc_rbdlen;     /* RxBD down counter */
548         uint    fcc_rdptr;      /* RxBD internal data pointer */
549         uint    fcc_tstate;     /* Upper byte is Func code, must be set */
550         uint    fcc_tbase;      /* Transmit BD base */
551         ushort  fcc_tbdstat;    /* TxBD status */
552         ushort  fcc_tbdlen;     /* TxBD down counter */
553         uint    fcc_tdptr;      /* TxBD internal data pointer */
554         uint    fcc_rbptr;      /* Rx BD Internal buf pointer */
555         uint    fcc_tbptr;      /* Tx BD Internal buf pointer */
556         uint    fcc_rcrc;       /* Rx temp CRC */
557         uint    fcc_res2;
558         uint    fcc_tcrc;       /* Tx temp CRC */
559 } fccp_t;
560
561
562 /* Ethernet controller through FCC.
563 */
564 typedef struct fcc_enet {
565         fccp_t  fen_genfcc;
566         uint    fen_statbuf;    /* Internal status buffer */
567         uint    fen_camptr;     /* CAM address */
568         uint    fen_cmask;      /* Constant mask for CRC */
569         uint    fen_cpres;      /* Preset CRC */
570         uint    fen_crcec;      /* CRC Error counter */
571         uint    fen_alec;       /* alignment error counter */
572         uint    fen_disfc;      /* discard frame counter */
573         ushort  fen_retlim;     /* Retry limit */
574         ushort  fen_retcnt;     /* Retry counter */
575         ushort  fen_pper;       /* Persistence */
576         ushort  fen_boffcnt;    /* backoff counter */
577         uint    fen_gaddrh;     /* Group address filter, high 32-bits */
578         uint    fen_gaddrl;     /* Group address filter, low 32-bits */
579         ushort  fen_tfcstat;    /* out of sequence TxBD */
580         ushort  fen_tfclen;
581         uint    fen_tfcptr;
582         ushort  fen_mflr;       /* Maximum frame length (1518) */
583         ushort  fen_paddrh;     /* MAC address */
584         ushort  fen_paddrm;
585         ushort  fen_paddrl;
586         ushort  fen_ibdcount;   /* Internal BD counter */
587         ushort  fen_ibdstart;   /* Internal BD start pointer */
588         ushort  fen_ibdend;     /* Internal BD end pointer */
589         ushort  fen_txlen;      /* Internal Tx frame length counter */
590         uint    fen_ibdbase[8]; /* Internal use */
591         uint    fen_iaddrh;     /* Individual address filter */
592         uint    fen_iaddrl;
593         ushort  fen_minflr;     /* Minimum frame length (64) */
594         ushort  fen_taddrh;     /* Filter transfer MAC address */
595         ushort  fen_taddrm;
596         ushort  fen_taddrl;
597         ushort  fen_padptr;     /* Pointer to pad byte buffer */
598         ushort  fen_cftype;     /* control frame type */
599         ushort  fen_cfrange;    /* control frame range */
600         ushort  fen_maxb;       /* maximum BD count */
601         ushort  fen_maxd1;      /* Max DMA1 length (1520) */
602         ushort  fen_maxd2;      /* Max DMA2 length (1520) */
603         ushort  fen_maxd;       /* internal max DMA count */
604         ushort  fen_dmacnt;     /* internal DMA counter */
605         uint    fen_octc;       /* Total octect counter */
606         uint    fen_colc;       /* Total collision counter */
607         uint    fen_broc;       /* Total broadcast packet counter */
608         uint    fen_mulc;       /* Total multicast packet count */
609         uint    fen_uspc;       /* Total packets < 64 bytes */
610         uint    fen_frgc;       /* Total packets < 64 bytes with errors */
611         uint    fen_ospc;       /* Total packets > 1518 */
612         uint    fen_jbrc;       /* Total packets > 1518 with errors */
613         uint    fen_p64c;       /* Total packets == 64 bytes */
614         uint    fen_p65c;       /* Total packets 64 < bytes <= 127 */
615         uint    fen_p128c;      /* Total packets 127 < bytes <= 255 */
616         uint    fen_p256c;      /* Total packets 256 < bytes <= 511 */
617         uint    fen_p512c;      /* Total packets 512 < bytes <= 1023 */
618         uint    fen_p1024c;     /* Total packets 1024 < bytes <= 1518 */
619         uint    fen_cambuf;     /* Internal CAM buffer poiner */
620         ushort  fen_rfthr;      /* Received frames threshold */
621         ushort  fen_rfcnt;      /* Received frames count */
622 } fcc_enet_t;
623
624 /* FCC Event/Mask register as used by Ethernet.
625 */
626 #define FCC_ENET_GRA    ((ushort)0x0080)        /* Graceful stop complete */
627 #define FCC_ENET_RXC    ((ushort)0x0040)        /* Control Frame Received */
628 #define FCC_ENET_TXC    ((ushort)0x0020)        /* Out of seq. Tx sent */
629 #define FCC_ENET_TXE    ((ushort)0x0010)        /* Transmit Error */
630 #define FCC_ENET_RXF    ((ushort)0x0008)        /* Full frame received */
631 #define FCC_ENET_BSY    ((ushort)0x0004)        /* Busy.  Rx Frame dropped */
632 #define FCC_ENET_TXB    ((ushort)0x0002)        /* A buffer was transmitted */
633 #define FCC_ENET_RXB    ((ushort)0x0001)        /* A buffer was received */
634
635 /* FCC Mode Register (FPSMR) as used by Ethernet.
636 */
637 #define FCC_PSMR_HBC    ((uint)0x80000000)      /* Enable heartbeat */
638 #define FCC_PSMR_FC     ((uint)0x40000000)      /* Force Collision */
639 #define FCC_PSMR_SBT    ((uint)0x20000000)      /* Stop backoff timer */
640 #define FCC_PSMR_LPB    ((uint)0x10000000)      /* Local protect. 1 = FDX */
641 #define FCC_PSMR_LCW    ((uint)0x08000000)      /* Late collision select */
642 #define FCC_PSMR_FDE    ((uint)0x04000000)      /* Full Duplex Enable */
643 #define FCC_PSMR_MON    ((uint)0x02000000)      /* RMON Enable */
644 #define FCC_PSMR_PRO    ((uint)0x00400000)      /* Promiscuous Enable */
645 #define FCC_PSMR_FCE    ((uint)0x00200000)      /* Flow Control Enable */
646 #define FCC_PSMR_RSH    ((uint)0x00100000)      /* Receive Short Frames */
647 #define FCC_PSMR_CAM    ((uint)0x00000400)      /* CAM enable */
648 #define FCC_PSMR_BRO    ((uint)0x00000200)      /* Broadcast pkt discard */
649 #define FCC_PSMR_ENCRC  ((uint)0x00000080)      /* Use 32-bit CRC */
650
651 /* IIC parameter RAM.
652 */
653 typedef struct iic {
654         ushort  iic_rbase;      /* Rx Buffer descriptor base address */
655         ushort  iic_tbase;      /* Tx Buffer descriptor base address */
656         u_char  iic_rfcr;       /* Rx function code */
657         u_char  iic_tfcr;       /* Tx function code */
658         ushort  iic_mrblr;      /* Max receive buffer length */
659         uint    iic_rstate;     /* Internal */
660         uint    iic_rdp;        /* Internal */
661         ushort  iic_rbptr;      /* Internal */
662         ushort  iic_rbc;        /* Internal */
663         uint    iic_rxtmp;      /* Internal */
664         uint    iic_tstate;     /* Internal */
665         uint    iic_tdp;        /* Internal */
666         ushort  iic_tbptr;      /* Internal */
667         ushort  iic_tbc;        /* Internal */
668         uint    iic_txtmp;      /* Internal */
669 } iic_t;
670
671 /* SPI parameter RAM.
672 */
673 typedef struct spi {
674         ushort  spi_rbase;      /* Rx Buffer descriptor base address */
675         ushort  spi_tbase;      /* Tx Buffer descriptor base address */
676         u_char  spi_rfcr;       /* Rx function code */
677         u_char  spi_tfcr;       /* Tx function code */
678         ushort  spi_mrblr;      /* Max receive buffer length */
679         uint    spi_rstate;     /* Internal */
680         uint    spi_rdp;        /* Internal */
681         ushort  spi_rbptr;      /* Internal */
682         ushort  spi_rbc;        /* Internal */
683         uint    spi_rxtmp;      /* Internal */
684         uint    spi_tstate;     /* Internal */
685         uint    spi_tdp;        /* Internal */
686         ushort  spi_tbptr;      /* Internal */
687         ushort  spi_tbc;        /* Internal */
688         uint    spi_txtmp;      /* Internal */
689         uint    spi_res;        /* Tx temp. */
690         uint    spi_res1[4];    /* SDMA temp. */
691 } spi_t;
692
693 /* SPI Mode register.
694 */
695 #define SPMODE_LOOP     ((ushort)0x4000)        /* Loopback */
696 #define SPMODE_CI       ((ushort)0x2000)        /* Clock Invert */
697 #define SPMODE_CP       ((ushort)0x1000)        /* Clock Phase */
698 #define SPMODE_DIV16    ((ushort)0x0800)        /* BRG/16 mode */
699 #define SPMODE_REV      ((ushort)0x0400)        /* Reversed Data */
700 #define SPMODE_MSTR     ((ushort)0x0200)        /* SPI Master */
701 #define SPMODE_EN       ((ushort)0x0100)        /* Enable */
702 #define SPMODE_LENMSK   ((ushort)0x00f0)        /* character length */
703 #define SPMODE_PMMSK    ((ushort)0x000f)        /* prescale modulus */
704
705 #define SPMODE_LEN(x)   ((((x)-1)&0xF)<<4)
706 #define SPMODE_PM(x)    ((x) &0xF)
707
708 #define SPI_EB          ((u_char)0x10)          /* big endian byte order */
709
710 /* IDMA parameter RAM
711 */
712 typedef struct idma {
713         ushort ibase;           /* IDMA buffer descriptor table base address */
714         ushort dcm;             /* DMA channel mode */
715         ushort ibdptr;          /* IDMA current buffer descriptor pointer */
716         ushort dpr_buf;         /* IDMA transfer buffer base address */
717         ushort buf_inv;         /* internal buffer inventory */
718         ushort ss_max;          /* steady-state maximum transfer size */
719         ushort dpr_in_ptr;      /* write pointer inside the internal buffer */
720         ushort sts;             /* source transfer size */
721         ushort dpr_out_ptr;     /* read pointer inside the internal buffer */
722         ushort seob;            /* source end of burst */
723         ushort deob;            /* destination end of burst */
724         ushort dts;             /* destination transfer size */
725         ushort ret_add;         /* return address when working in ERM=1 mode */
726         ushort res0;            /* reserved */
727         uint   bd_cnt;          /* internal byte count */
728         uint   s_ptr;           /* source internal data pointer */
729         uint   d_ptr;           /* destination internal data pointer */
730         uint   istate;          /* internal state */
731         u_char res1[20];        /* pad to 64-byte length */
732 } idma_t;
733
734 /* DMA channel mode bit fields
735 */
736 #define IDMA_DCM_FB             ((ushort)0x8000) /* fly-by mode */
737 #define IDMA_DCM_LP             ((ushort)0x4000) /* low priority */
738 #define IDMA_DCM_TC2            ((ushort)0x0400) /* value driven on TC[2] */
739 #define IDMA_DCM_DMA_WRAP_MASK  ((ushort)0x01c0) /* mask for DMA wrap */
740 #define IDMA_DCM_DMA_WRAP_64    ((ushort)0x0000) /* 64-byte DMA xfer buffer */
741 #define IDMA_DCM_DMA_WRAP_128   ((ushort)0x0040) /* 128-byte DMA xfer buffer */
742 #define IDMA_DCM_DMA_WRAP_256   ((ushort)0x0080) /* 256-byte DMA xfer buffer */
743 #define IDMA_DCM_DMA_WRAP_512   ((ushort)0x00c0) /* 512-byte DMA xfer buffer */
744 #define IDMA_DCM_DMA_WRAP_1024  ((ushort)0x0100) /* 1024-byte DMA xfer buffer */
745 #define IDMA_DCM_DMA_WRAP_2048  ((ushort)0x0140) /* 2048-byte DMA xfer buffer */
746 #define IDMA_DCM_SINC           ((ushort)0x0020) /* source inc addr */
747 #define IDMA_DCM_DINC           ((ushort)0x0010) /* destination inc addr */
748 #define IDMA_DCM_ERM            ((ushort)0x0008) /* external request mode */
749 #define IDMA_DCM_DT             ((ushort)0x0004) /* DONE treatment */
750 #define IDMA_DCM_SD_MASK        ((ushort)0x0003) /* mask for SD bit field */
751 #define IDMA_DCM_SD_MEM2MEM     ((ushort)0x0000) /* memory-to-memory xfer */
752 #define IDMA_DCM_SD_PER2MEM     ((ushort)0x0002) /* peripheral-to-memory xfer */
753 #define IDMA_DCM_SD_MEM2PER     ((ushort)0x0001) /* memory-to-peripheral xfer */
754
755 /* IDMA Buffer Descriptors
756 */
757 typedef struct idma_bd {
758         uint flags;
759         uint len;       /* data length */
760         uint src;       /* source data buffer pointer */
761         uint dst;       /* destination data buffer pointer */
762 } idma_bd_t;
763
764 /* IDMA buffer descriptor flag bit fields
765 */
766 #define IDMA_BD_V       ((uint)0x80000000)      /* valid */
767 #define IDMA_BD_W       ((uint)0x20000000)      /* wrap */
768 #define IDMA_BD_I       ((uint)0x10000000)      /* interrupt */
769 #define IDMA_BD_L       ((uint)0x08000000)      /* last */
770 #define IDMA_BD_CM      ((uint)0x02000000)      /* continuous mode */
771 #define IDMA_BD_SDN     ((uint)0x00400000)      /* source done */
772 #define IDMA_BD_DDN     ((uint)0x00200000)      /* destination done */
773 #define IDMA_BD_DGBL    ((uint)0x00100000)      /* destination global */
774 #define IDMA_BD_DBO_LE  ((uint)0x00040000)      /* little-end dest byte order */
775 #define IDMA_BD_DBO_BE  ((uint)0x00080000)      /* big-end dest byte order */
776 #define IDMA_BD_DDTB    ((uint)0x00010000)      /* destination data bus */
777 #define IDMA_BD_SGBL    ((uint)0x00002000)      /* source global */
778 #define IDMA_BD_SBO_LE  ((uint)0x00000800)      /* little-end src byte order */
779 #define IDMA_BD_SBO_BE  ((uint)0x00001000)      /* big-end src byte order */
780 #define IDMA_BD_SDTB    ((uint)0x00000200)      /* source data bus */
781
782 /* per-channel IDMA registers
783 */
784 typedef struct im_idma {
785         u_char idsr;                    /* IDMAn event status register */
786         u_char res0[3];
787         u_char idmr;                    /* IDMAn event mask register */
788         u_char res1[3];
789 } im_idma_t;
790
791 /* IDMA event register bit fields
792 */
793 #define IDMA_EVENT_SC   ((unsigned char)0x08)   /* stop completed */
794 #define IDMA_EVENT_OB   ((unsigned char)0x04)   /* out of buffers */
795 #define IDMA_EVENT_EDN  ((unsigned char)0x02)   /* external DONE asserted */
796 #define IDMA_EVENT_BC   ((unsigned char)0x01)   /* buffer descriptor complete */
797
798 /* RISC Controller Configuration Register (RCCR) bit fields
799 */
800 #define RCCR_TIME       ((uint)0x80000000) /* timer enable */
801 #define RCCR_TIMEP_MASK ((uint)0x3f000000) /* mask for timer period bit field */
802 #define RCCR_DR0M       ((uint)0x00800000) /* IDMA0 request mode */
803 #define RCCR_DR1M       ((uint)0x00400000) /* IDMA1 request mode */
804 #define RCCR_DR2M       ((uint)0x00000080) /* IDMA2 request mode */
805 #define RCCR_DR3M       ((uint)0x00000040) /* IDMA3 request mode */
806 #define RCCR_DR0QP_MASK ((uint)0x00300000) /* mask for IDMA0 req priority */
807 #define RCCR_DR0QP_HIGH ((uint)0x00000000) /* IDMA0 has high req priority */
808 #define RCCR_DR0QP_MED  ((uint)0x00100000) /* IDMA0 has medium req priority */
809 #define RCCR_DR0QP_LOW  ((uint)0x00200000) /* IDMA0 has low req priority */
810 #define RCCR_DR1QP_MASK ((uint)0x00030000) /* mask for IDMA1 req priority */
811 #define RCCR_DR1QP_HIGH ((uint)0x00000000) /* IDMA1 has high req priority */
812 #define RCCR_DR1QP_MED  ((uint)0x00010000) /* IDMA1 has medium req priority */
813 #define RCCR_DR1QP_LOW  ((uint)0x00020000) /* IDMA1 has low req priority */
814 #define RCCR_DR2QP_MASK ((uint)0x00000030) /* mask for IDMA2 req priority */
815 #define RCCR_DR2QP_HIGH ((uint)0x00000000) /* IDMA2 has high req priority */
816 #define RCCR_DR2QP_MED  ((uint)0x00000010) /* IDMA2 has medium req priority */
817 #define RCCR_DR2QP_LOW  ((uint)0x00000020) /* IDMA2 has low req priority */
818 #define RCCR_DR3QP_MASK ((uint)0x00000003) /* mask for IDMA3 req priority */
819 #define RCCR_DR3QP_HIGH ((uint)0x00000000) /* IDMA3 has high req priority */
820 #define RCCR_DR3QP_MED  ((uint)0x00000001) /* IDMA3 has medium req priority */
821 #define RCCR_DR3QP_LOW  ((uint)0x00000002) /* IDMA3 has low req priority */
822 #define RCCR_EIE        ((uint)0x00080000) /* external interrupt enable */
823 #define RCCR_SCD        ((uint)0x00040000) /* scheduler configuration */
824 #define RCCR_ERAM_MASK  ((uint)0x0000e000) /* mask for enable RAM microcode */
825 #define RCCR_ERAM_0KB   ((uint)0x00000000) /* use 0KB of dpram for microcode */
826 #define RCCR_ERAM_2KB   ((uint)0x00002000) /* use 2KB of dpram for microcode */
827 #define RCCR_ERAM_4KB   ((uint)0x00004000) /* use 4KB of dpram for microcode */
828 #define RCCR_ERAM_6KB   ((uint)0x00006000) /* use 6KB of dpram for microcode */
829 #define RCCR_ERAM_8KB   ((uint)0x00008000) /* use 8KB of dpram for microcode */
830 #define RCCR_ERAM_10KB  ((uint)0x0000a000) /* use 10KB of dpram for microcode */
831 #define RCCR_ERAM_12KB  ((uint)0x0000c000) /* use 12KB of dpram for microcode */
832 #define RCCR_EDM0       ((uint)0x00000800) /* DREQ0 edge detect mode */
833 #define RCCR_EDM1       ((uint)0x00000400) /* DREQ1 edge detect mode */
834 #define RCCR_EDM2       ((uint)0x00000200) /* DREQ2 edge detect mode */
835 #define RCCR_EDM3       ((uint)0x00000100) /* DREQ3 edge detect mode */
836 #define RCCR_DEM01      ((uint)0x00000008) /* DONE0/DONE1 edge detect mode */
837 #define RCCR_DEM23      ((uint)0x00000004) /* DONE2/DONE3 edge detect mode */
838
839 /*-----------------------------------------------------------------------
840  * CMXFCR - CMX FCC Clock Route Register
841  */
842 #define CMXFCR_FC1         0x40000000   /* FCC1 connection              */
843 #define CMXFCR_RF1CS_MSK   0x38000000   /* Receive FCC1 Clock Source Mask */
844 #define CMXFCR_TF1CS_MSK   0x07000000   /* Transmit FCC1 Clock Source Mask */
845 #define CMXFCR_FC2         0x00400000   /* FCC2 connection              */
846 #define CMXFCR_RF2CS_MSK   0x00380000   /* Receive FCC2 Clock Source Mask */
847 #define CMXFCR_TF2CS_MSK   0x00070000   /* Transmit FCC2 Clock Source Mask */
848 #define CMXFCR_FC3         0x00004000   /* FCC3 connection              */
849 #define CMXFCR_RF3CS_MSK   0x00003800   /* Receive FCC3 Clock Source Mask */
850 #define CMXFCR_TF3CS_MSK   0x00000700   /* Transmit FCC3 Clock Source Mask */
851
852 #define CMXFCR_RF1CS_BRG5  0x00000000   /* Receive FCC1 Clock Source is BRG5 */
853 #define CMXFCR_RF1CS_BRG6  0x08000000   /* Receive FCC1 Clock Source is BRG6 */
854 #define CMXFCR_RF1CS_BRG7  0x10000000   /* Receive FCC1 Clock Source is BRG7 */
855 #define CMXFCR_RF1CS_BRG8  0x18000000   /* Receive FCC1 Clock Source is BRG8 */
856 #define CMXFCR_RF1CS_CLK9  0x20000000   /* Receive FCC1 Clock Source is CLK9 */
857 #define CMXFCR_RF1CS_CLK10 0x28000000   /* Receive FCC1 Clock Source is CLK10 */
858 #define CMXFCR_RF1CS_CLK11 0x30000000   /* Receive FCC1 Clock Source is CLK11 */
859 #define CMXFCR_RF1CS_CLK12 0x38000000   /* Receive FCC1 Clock Source is CLK12 */
860
861 #define CMXFCR_TF1CS_BRG5  0x00000000   /* Transmit FCC1 Clock Source is BRG5 */
862 #define CMXFCR_TF1CS_BRG6  0x01000000   /* Transmit FCC1 Clock Source is BRG6 */
863 #define CMXFCR_TF1CS_BRG7  0x02000000   /* Transmit FCC1 Clock Source is BRG7 */
864 #define CMXFCR_TF1CS_BRG8  0x03000000   /* Transmit FCC1 Clock Source is BRG8 */
865 #define CMXFCR_TF1CS_CLK9  0x04000000   /* Transmit FCC1 Clock Source is CLK9 */
866 #define CMXFCR_TF1CS_CLK10 0x05000000   /* Transmit FCC1 Clock Source is CLK10 */
867 #define CMXFCR_TF1CS_CLK11 0x06000000   /* Transmit FCC1 Clock Source is CLK11 */
868 #define CMXFCR_TF1CS_CLK12 0x07000000   /* Transmit FCC1 Clock Source is CLK12 */
869
870 #define CMXFCR_RF2CS_BRG5  0x00000000   /* Receive FCC2 Clock Source is BRG5 */
871 #define CMXFCR_RF2CS_BRG6  0x00080000   /* Receive FCC2 Clock Source is BRG6 */
872 #define CMXFCR_RF2CS_BRG7  0x00100000   /* Receive FCC2 Clock Source is BRG7 */
873 #define CMXFCR_RF2CS_BRG8  0x00180000   /* Receive FCC2 Clock Source is BRG8 */
874 #define CMXFCR_RF2CS_CLK13 0x00200000   /* Receive FCC2 Clock Source is CLK13 */
875 #define CMXFCR_RF2CS_CLK14 0x00280000   /* Receive FCC2 Clock Source is CLK14 */
876 #define CMXFCR_RF2CS_CLK15 0x00300000   /* Receive FCC2 Clock Source is CLK15 */
877 #define CMXFCR_RF2CS_CLK16 0x00380000   /* Receive FCC2 Clock Source is CLK16 */
878
879 #define CMXFCR_TF2CS_BRG5  0x00000000   /* Transmit FCC2 Clock Source is BRG5 */
880 #define CMXFCR_TF2CS_BRG6  0x00010000   /* Transmit FCC2 Clock Source is BRG6 */
881 #define CMXFCR_TF2CS_BRG7  0x00020000   /* Transmit FCC2 Clock Source is BRG7 */
882 #define CMXFCR_TF2CS_BRG8  0x00030000   /* Transmit FCC2 Clock Source is BRG8 */
883 #define CMXFCR_TF2CS_CLK13 0x00040000   /* Transmit FCC2 Clock Source is CLK13 */
884 #define CMXFCR_TF2CS_CLK14 0x00050000   /* Transmit FCC2 Clock Source is CLK14 */
885 #define CMXFCR_TF2CS_CLK15 0x00060000   /* Transmit FCC2 Clock Source is CLK15 */
886 #define CMXFCR_TF2CS_CLK16 0x00070000   /* Transmit FCC2 Clock Source is CLK16 */
887
888 #define CMXFCR_RF3CS_BRG5  0x00000000   /* Receive FCC3 Clock Source is BRG5 */
889 #define CMXFCR_RF3CS_BRG6  0x00000800   /* Receive FCC3 Clock Source is BRG6 */
890 #define CMXFCR_RF3CS_BRG7  0x00001000   /* Receive FCC3 Clock Source is BRG7 */
891 #define CMXFCR_RF3CS_BRG8  0x00001800   /* Receive FCC3 Clock Source is BRG8 */
892 #define CMXFCR_RF3CS_CLK13 0x00002000   /* Receive FCC3 Clock Source is CLK13 */
893 #define CMXFCR_RF3CS_CLK14 0x00002800   /* Receive FCC3 Clock Source is CLK14 */
894 #define CMXFCR_RF3CS_CLK15 0x00003000   /* Receive FCC3 Clock Source is CLK15 */
895 #define CMXFCR_RF3CS_CLK16 0x00003800   /* Receive FCC3 Clock Source is CLK16 */
896
897 #define CMXFCR_TF3CS_BRG5  0x00000000   /* Transmit FCC3 Clock Source is BRG5 */
898 #define CMXFCR_TF3CS_BRG6  0x00000100   /* Transmit FCC3 Clock Source is BRG6 */
899 #define CMXFCR_TF3CS_BRG7  0x00000200   /* Transmit FCC3 Clock Source is BRG7 */
900 #define CMXFCR_TF3CS_BRG8  0x00000300   /* Transmit FCC3 Clock Source is BRG8 */
901 #define CMXFCR_TF3CS_CLK13 0x00000400   /* Transmit FCC3 Clock Source is CLK13 */
902 #define CMXFCR_TF3CS_CLK14 0x00000500   /* Transmit FCC3 Clock Source is CLK14 */
903 #define CMXFCR_TF3CS_CLK15 0x00000600   /* Transmit FCC3 Clock Source is CLK15 */
904 #define CMXFCR_TF3CS_CLK16 0x00000700   /* Transmit FCC3 Clock Source is CLK16 */
905
906 /*-----------------------------------------------------------------------
907  * CMXSCR - CMX SCC Clock Route Register
908  */
909 #define CMXSCR_GR1         0x80000000   /* Grant Support of SCC1        */
910 #define CMXSCR_SC1         0x40000000   /* SCC1 connection              */
911 #define CMXSCR_RS1CS_MSK   0x38000000   /* Receive SCC1 Clock Source Mask */
912 #define CMXSCR_TS1CS_MSK   0x07000000   /* Transmit SCC1 Clock Source Mask */
913 #define CMXSCR_GR2         0x00800000   /* Grant Support of SCC2        */
914 #define CMXSCR_SC2         0x00400000   /* SCC2 connection              */
915 #define CMXSCR_RS2CS_MSK   0x00380000   /* Receive SCC2 Clock Source Mask */
916 #define CMXSCR_TS2CS_MSK   0x00070000   /* Transmit SCC2 Clock Source Mask */
917 #define CMXSCR_GR3         0x00008000   /* Grant Support of SCC3        */
918 #define CMXSCR_SC3         0x00004000   /* SCC3 connection              */
919 #define CMXSCR_RS3CS_MSK   0x00003800   /* Receive SCC3 Clock Source Mask */
920 #define CMXSCR_TS3CS_MSK   0x00000700   /* Transmit SCC3 Clock Source Mask */
921 #define CMXSCR_GR4         0x00000080   /* Grant Support of SCC4        */
922 #define CMXSCR_SC4         0x00000040   /* SCC4 connection              */
923 #define CMXSCR_RS4CS_MSK   0x00000038   /* Receive SCC4 Clock Source Mask */
924 #define CMXSCR_TS4CS_MSK   0x00000007   /* Transmit SCC4 Clock Source Mask */
925
926 #define CMXSCR_RS1CS_BRG1  0x00000000   /* SCC1 Rx Clock Source is BRG1 */
927 #define CMXSCR_RS1CS_BRG2  0x08000000   /* SCC1 Rx Clock Source is BRG2 */
928 #define CMXSCR_RS1CS_BRG3  0x10000000   /* SCC1 Rx Clock Source is BRG3 */
929 #define CMXSCR_RS1CS_BRG4  0x18000000   /* SCC1 Rx Clock Source is BRG4 */
930 #define CMXSCR_RS1CS_CLK11 0x20000000   /* SCC1 Rx Clock Source is CLK11 */
931 #define CMXSCR_RS1CS_CLK12 0x28000000   /* SCC1 Rx Clock Source is CLK12 */
932 #define CMXSCR_RS1CS_CLK3  0x30000000   /* SCC1 Rx Clock Source is CLK3 */
933 #define CMXSCR_RS1CS_CLK4  0x38000000   /* SCC1 Rx Clock Source is CLK4 */
934
935 #define CMXSCR_TS1CS_BRG1  0x00000000   /* SCC1 Tx Clock Source is BRG1 */
936 #define CMXSCR_TS1CS_BRG2  0x01000000   /* SCC1 Tx Clock Source is BRG2 */
937 #define CMXSCR_TS1CS_BRG3  0x02000000   /* SCC1 Tx Clock Source is BRG3 */
938 #define CMXSCR_TS1CS_BRG4  0x03000000   /* SCC1 Tx Clock Source is BRG4 */
939 #define CMXSCR_TS1CS_CLK11 0x04000000   /* SCC1 Tx Clock Source is CLK11 */
940 #define CMXSCR_TS1CS_CLK12 0x05000000   /* SCC1 Tx Clock Source is CLK12 */
941 #define CMXSCR_TS1CS_CLK3  0x06000000   /* SCC1 Tx Clock Source is CLK3 */
942 #define CMXSCR_TS1CS_CLK4  0x07000000   /* SCC1 Tx Clock Source is CLK4 */
943
944 #define CMXSCR_RS2CS_BRG1  0x00000000   /* SCC2 Rx Clock Source is BRG1 */
945 #define CMXSCR_RS2CS_BRG2  0x00080000   /* SCC2 Rx Clock Source is BRG2 */
946 #define CMXSCR_RS2CS_BRG3  0x00100000   /* SCC2 Rx Clock Source is BRG3 */
947 #define CMXSCR_RS2CS_BRG4  0x00180000   /* SCC2 Rx Clock Source is BRG4 */
948 #define CMXSCR_RS2CS_CLK11 0x00200000   /* SCC2 Rx Clock Source is CLK11 */
949 #define CMXSCR_RS2CS_CLK12 0x00280000   /* SCC2 Rx Clock Source is CLK12 */
950 #define CMXSCR_RS2CS_CLK3  0x00300000   /* SCC2 Rx Clock Source is CLK3 */
951 #define CMXSCR_RS2CS_CLK4  0x00380000   /* SCC2 Rx Clock Source is CLK4 */
952
953 #define CMXSCR_TS2CS_BRG1  0x00000000   /* SCC2 Tx Clock Source is BRG1 */
954 #define CMXSCR_TS2CS_BRG2  0x00010000   /* SCC2 Tx Clock Source is BRG2 */
955 #define CMXSCR_TS2CS_BRG3  0x00020000   /* SCC2 Tx Clock Source is BRG3 */
956 #define CMXSCR_TS2CS_BRG4  0x00030000   /* SCC2 Tx Clock Source is BRG4 */
957 #define CMXSCR_TS2CS_CLK11 0x00040000   /* SCC2 Tx Clock Source is CLK11 */
958 #define CMXSCR_TS2CS_CLK12 0x00050000   /* SCC2 Tx Clock Source is CLK12 */
959 #define CMXSCR_TS2CS_CLK3  0x00060000   /* SCC2 Tx Clock Source is CLK3 */
960 #define CMXSCR_TS2CS_CLK4  0x00070000   /* SCC2 Tx Clock Source is CLK4 */
961
962 #define CMXSCR_RS3CS_BRG1  0x00000000   /* SCC3 Rx Clock Source is BRG1 */
963 #define CMXSCR_RS3CS_BRG2  0x00000800   /* SCC3 Rx Clock Source is BRG2 */
964 #define CMXSCR_RS3CS_BRG3  0x00001000   /* SCC3 Rx Clock Source is BRG3 */
965 #define CMXSCR_RS3CS_BRG4  0x00001800   /* SCC3 Rx Clock Source is BRG4 */
966 #define CMXSCR_RS3CS_CLK5  0x00002000   /* SCC3 Rx Clock Source is CLK5 */
967 #define CMXSCR_RS3CS_CLK6  0x00002800   /* SCC3 Rx Clock Source is CLK6 */
968 #define CMXSCR_RS3CS_CLK7  0x00003000   /* SCC3 Rx Clock Source is CLK7 */
969 #define CMXSCR_RS3CS_CLK8  0x00003800   /* SCC3 Rx Clock Source is CLK8 */
970
971 #define CMXSCR_TS3CS_BRG1  0x00000000   /* SCC3 Tx Clock Source is BRG1 */
972 #define CMXSCR_TS3CS_BRG2  0x00000100   /* SCC3 Tx Clock Source is BRG2 */
973 #define CMXSCR_TS3CS_BRG3  0x00000200   /* SCC3 Tx Clock Source is BRG3 */
974 #define CMXSCR_TS3CS_BRG4  0x00000300   /* SCC3 Tx Clock Source is BRG4 */
975 #define CMXSCR_TS3CS_CLK5  0x00000400   /* SCC3 Tx Clock Source is CLK5 */
976 #define CMXSCR_TS3CS_CLK6  0x00000500   /* SCC3 Tx Clock Source is CLK6 */
977 #define CMXSCR_TS3CS_CLK7  0x00000600   /* SCC3 Tx Clock Source is CLK7 */
978 #define CMXSCR_TS3CS_CLK8  0x00000700   /* SCC3 Tx Clock Source is CLK8 */
979
980 #define CMXSCR_RS4CS_BRG1  0x00000000   /* SCC4 Rx Clock Source is BRG1 */
981 #define CMXSCR_RS4CS_BRG2  0x00000008   /* SCC4 Rx Clock Source is BRG2 */
982 #define CMXSCR_RS4CS_BRG3  0x00000010   /* SCC4 Rx Clock Source is BRG3 */
983 #define CMXSCR_RS4CS_BRG4  0x00000018   /* SCC4 Rx Clock Source is BRG4 */
984 #define CMXSCR_RS4CS_CLK5  0x00000020   /* SCC4 Rx Clock Source is CLK5 */
985 #define CMXSCR_RS4CS_CLK6  0x00000028   /* SCC4 Rx Clock Source is CLK6 */
986 #define CMXSCR_RS4CS_CLK7  0x00000030   /* SCC4 Rx Clock Source is CLK7 */
987 #define CMXSCR_RS4CS_CLK8  0x00000038   /* SCC4 Rx Clock Source is CLK8 */
988
989 #define CMXSCR_TS4CS_BRG1  0x00000000   /* SCC4 Tx Clock Source is BRG1 */
990 #define CMXSCR_TS4CS_BRG2  0x00000001   /* SCC4 Tx Clock Source is BRG2 */
991 #define CMXSCR_TS4CS_BRG3  0x00000002   /* SCC4 Tx Clock Source is BRG3 */
992 #define CMXSCR_TS4CS_BRG4  0x00000003   /* SCC4 Tx Clock Source is BRG4 */
993 #define CMXSCR_TS4CS_CLK5  0x00000004   /* SCC4 Tx Clock Source is CLK5 */
994 #define CMXSCR_TS4CS_CLK6  0x00000005   /* SCC4 Tx Clock Source is CLK6 */
995 #define CMXSCR_TS4CS_CLK7  0x00000006   /* SCC4 Tx Clock Source is CLK7 */
996 #define CMXSCR_TS4CS_CLK8  0x00000007   /* SCC4 Tx Clock Source is CLK8 */
997
998 /*-----------------------------------------------------------------------
999  * SIUMCR - SIU Module Configuration Register                            4-31
1000  */
1001 #define SIUMCR_BBD      0x80000000      /* Bus Busy Disable             */
1002 #define SIUMCR_ESE      0x40000000      /* External Snoop Enable        */
1003 #define SIUMCR_PBSE     0x20000000      /* Parity Byte Select Enable    */
1004 #define SIUMCR_CDIS     0x10000000      /* Core Disable                 */
1005 #define SIUMCR_DPPC00   0x00000000      /* Data Parity Pins Configuration*/
1006 #define SIUMCR_DPPC01   0x04000000      /* - " -                        */
1007 #define SIUMCR_DPPC10   0x08000000      /* - " -                        */
1008 #define SIUMCR_DPPC11   0x0c000000      /* - " -                        */
1009 #define SIUMCR_L2CPC00  0x00000000      /* L2 Cache Pins Configuration  */
1010 #define SIUMCR_L2CPC01  0x01000000      /* - " -                        */
1011 #define SIUMCR_L2CPC10  0x02000000      /* - " -                        */
1012 #define SIUMCR_L2CPC11  0x03000000      /* - " -                        */
1013 #define SIUMCR_LBPC00   0x00000000      /* Local Bus Pins Configuration */
1014 #define SIUMCR_LBPC01   0x00400000      /* - " -                        */
1015 #define SIUMCR_LBPC10   0x00800000      /* - " -                        */
1016 #define SIUMCR_LBPC11   0x00c00000      /* - " -                        */
1017 #define SIUMCR_APPC00   0x00000000      /* Address Parity Pins Configuration*/
1018 #define SIUMCR_APPC01   0x00100000      /* - " -                        */
1019 #define SIUMCR_APPC10   0x00200000      /* - " -                        */
1020 #define SIUMCR_APPC11   0x00300000      /* - " -                        */
1021 #define SIUMCR_CS10PC00 0x00000000      /* CS10 Pin Configuration       */
1022 #define SIUMCR_CS10PC01 0x00040000      /* - " -                        */
1023 #define SIUMCR_CS10PC10 0x00080000      /* - " -                        */
1024 #define SIUMCR_CS10PC11 0x000c0000      /* - " -                        */
1025 #define SIUMCR_BCTLC00  0x00000000      /* Buffer Control Configuration */
1026 #define SIUMCR_BCTLC01  0x00010000      /* - " -                        */
1027 #define SIUMCR_BCTLC10  0x00020000      /* - " -                        */
1028 #define SIUMCR_BCTLC11  0x00030000      /* - " -                        */
1029 #define SIUMCR_MMR00    0x00000000      /* Mask Masters Requests        */
1030 #define SIUMCR_MMR01    0x00004000      /* - " -                        */
1031 #define SIUMCR_MMR10    0x00008000      /* - " -                        */
1032 #define SIUMCR_MMR11    0x0000c000      /* - " -                        */
1033 #define SIUMCR_LPBSE    0x00002000      /* LocalBus Parity Byte Select Enable*/
1034
1035 /*-----------------------------------------------------------------------
1036  * SCCR - System Clock Control Register                                  9-8
1037 */
1038 #define SCCR_PCI_MODE   0x00000100      /* PCI Mode     */
1039 #define SCCR_PCI_MODCK  0x00000080      /* Value of PCI_MODCK pin       */
1040 #define SCCR_PCIDF_MSK  0x00000078      /* PCI division factor  */
1041 #define SCCR_PCIDF_SHIFT 3
1042
1043 #ifndef CPM_IMMR_OFFSET
1044 #define CPM_IMMR_OFFSET 0x101a8
1045 #endif
1046
1047 #define FCC_PSMR_RMII   ((uint)0x00020000)      /* Use RMII interface */
1048
1049 /* FCC iop & clock configuration. BSP code is responsible to define Fx_RXCLK & Fx_TXCLK
1050  * in order to use clock-computing stuff below for the FCC x
1051  */
1052
1053 /* Automatically generates register configurations */
1054 #define PC_CLK(x)       ((uint)(1<<(x-1)))      /* FCC CLK I/O ports */
1055
1056 #define CMXFCR_RF1CS(x) ((uint)((x-5)<<27))     /* FCC1 Receive Clock Source */
1057 #define CMXFCR_TF1CS(x) ((uint)((x-5)<<24))     /* FCC1 Transmit Clock Source */
1058 #define CMXFCR_RF2CS(x) ((uint)((x-9)<<19))     /* FCC2 Receive Clock Source */
1059 #define CMXFCR_TF2CS(x) ((uint)((x-9)<<16))     /* FCC2 Transmit Clock Source */
1060 #define CMXFCR_RF3CS(x) ((uint)((x-9)<<11))     /* FCC3 Receive Clock Source */
1061 #define CMXFCR_TF3CS(x) ((uint)((x-9)<<8))      /* FCC3 Transmit Clock Source */
1062
1063 #define PC_F1RXCLK      PC_CLK(F1_RXCLK)
1064 #define PC_F1TXCLK      PC_CLK(F1_TXCLK)
1065 #define CMX1_CLK_ROUTE  (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK))
1066 #define CMX1_CLK_MASK   ((uint)0xff000000)
1067
1068 #define PC_F2RXCLK      PC_CLK(F2_RXCLK)
1069 #define PC_F2TXCLK      PC_CLK(F2_TXCLK)
1070 #define CMX2_CLK_ROUTE  (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK))
1071 #define CMX2_CLK_MASK   ((uint)0x00ff0000)
1072
1073 #define PC_F3RXCLK      PC_CLK(F3_RXCLK)
1074 #define PC_F3TXCLK      PC_CLK(F3_TXCLK)
1075 #define CMX3_CLK_ROUTE  (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK))
1076 #define CMX3_CLK_MASK   ((uint)0x0000ff00)
1077
1078 #define CPMUX_CLK_MASK (CMX3_CLK_MASK | CMX2_CLK_MASK)
1079 #define CPMUX_CLK_ROUTE (CMX3_CLK_ROUTE | CMX2_CLK_ROUTE)
1080
1081 #define CLK_TRX (PC_F3TXCLK | PC_F3RXCLK | PC_F2TXCLK | PC_F2RXCLK)
1082
1083 /* I/O Pin assignment for FCC1.  I don't yet know the best way to do this,
1084  * but there is little variation among the choices.
1085  */
1086 #define PA1_COL         0x00000001U
1087 #define PA1_CRS         0x00000002U
1088 #define PA1_TXER        0x00000004U
1089 #define PA1_TXEN        0x00000008U
1090 #define PA1_RXDV        0x00000010U
1091 #define PA1_RXER        0x00000020U
1092 #define PA1_TXDAT       0x00003c00U
1093 #define PA1_RXDAT       0x0003c000U
1094 #define PA1_PSORA0      (PA1_RXDAT | PA1_TXDAT)
1095 #define PA1_PSORA1      (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \
1096                 PA1_RXDV | PA1_RXER)
1097 #define PA1_DIRA0       (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV)
1098 #define PA1_DIRA1       (PA1_TXDAT | PA1_TXEN | PA1_TXER)
1099
1100
1101 /* I/O Pin assignment for FCC2.  I don't yet know the best way to do this,
1102  * but there is little variation among the choices.
1103  */
1104 #define PB2_TXER        0x00000001U
1105 #define PB2_RXDV        0x00000002U
1106 #define PB2_TXEN        0x00000004U
1107 #define PB2_RXER        0x00000008U
1108 #define PB2_COL         0x00000010U
1109 #define PB2_CRS         0x00000020U
1110 #define PB2_TXDAT       0x000003c0U
1111 #define PB2_RXDAT       0x00003c00U
1112 #define PB2_PSORB0      (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \
1113                 PB2_RXER | PB2_RXDV | PB2_TXER)
1114 #define PB2_PSORB1      (PB2_TXEN)
1115 #define PB2_DIRB0       (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV)
1116 #define PB2_DIRB1       (PB2_TXDAT | PB2_TXEN | PB2_TXER)
1117
1118
1119 /* I/O Pin assignment for FCC3.  I don't yet know the best way to do this,
1120  * but there is little variation among the choices.
1121  */
1122 #define PB3_RXDV        0x00004000U
1123 #define PB3_RXER        0x00008000U
1124 #define PB3_TXER        0x00010000U
1125 #define PB3_TXEN        0x00020000U
1126 #define PB3_COL         0x00040000U
1127 #define PB3_CRS         0x00080000U
1128 #define PB3_TXDAT       0x0f000000U
1129 #define PC3_TXDAT       0x00000010U
1130 #define PB3_RXDAT       0x00f00000U
1131 #define PB3_PSORB0      (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \
1132                 PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN)
1133 #define PB3_PSORB1      0
1134 #define PB3_DIRB0       (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV)
1135 #define PB3_DIRB1       (PB3_TXDAT | PB3_TXEN | PB3_TXER)
1136 #define PC3_DIRC1       (PC3_TXDAT)
1137
1138 /* Handy macro to specify mem for FCCs*/
1139 #define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128))
1140 #define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0)
1141 #define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1)
1142 #define FCC3_MEM_OFFSET FCC_MEM_OFFSET(2)
1143
1144 /* Clocks and GRG's */
1145
1146 enum cpm_clk_dir {
1147         CPM_CLK_RX,
1148         CPM_CLK_TX,
1149         CPM_CLK_RTX
1150 };
1151
1152 enum cpm_clk_target {
1153         CPM_CLK_SCC1,
1154         CPM_CLK_SCC2,
1155         CPM_CLK_SCC3,
1156         CPM_CLK_SCC4,
1157         CPM_CLK_FCC1,
1158         CPM_CLK_FCC2,
1159         CPM_CLK_FCC3,
1160         CPM_CLK_SMC1,
1161         CPM_CLK_SMC2,
1162 };
1163
1164 enum cpm_clk {
1165         CPM_CLK_NONE = 0,
1166         CPM_BRG1,       /* Baud Rate Generator  1 */
1167         CPM_BRG2,       /* Baud Rate Generator  2 */
1168         CPM_BRG3,       /* Baud Rate Generator  3 */
1169         CPM_BRG4,       /* Baud Rate Generator  4 */
1170         CPM_BRG5,       /* Baud Rate Generator  5 */
1171         CPM_BRG6,       /* Baud Rate Generator  6 */
1172         CPM_BRG7,       /* Baud Rate Generator  7 */
1173         CPM_BRG8,       /* Baud Rate Generator  8 */
1174         CPM_CLK1,       /* Clock  1 */
1175         CPM_CLK2,       /* Clock  2 */
1176         CPM_CLK3,       /* Clock  3 */
1177         CPM_CLK4,       /* Clock  4 */
1178         CPM_CLK5,       /* Clock  5 */
1179         CPM_CLK6,       /* Clock  6 */
1180         CPM_CLK7,       /* Clock  7 */
1181         CPM_CLK8,       /* Clock  8 */
1182         CPM_CLK9,       /* Clock  9 */
1183         CPM_CLK10,      /* Clock 10 */
1184         CPM_CLK11,      /* Clock 11 */
1185         CPM_CLK12,      /* Clock 12 */
1186         CPM_CLK13,      /* Clock 13 */
1187         CPM_CLK14,      /* Clock 14 */
1188         CPM_CLK15,      /* Clock 15 */
1189         CPM_CLK16,      /* Clock 16 */
1190         CPM_CLK17,      /* Clock 17 */
1191         CPM_CLK18,      /* Clock 18 */
1192         CPM_CLK19,      /* Clock 19 */
1193         CPM_CLK20,      /* Clock 20 */
1194         CPM_CLK_DUMMY
1195 };
1196
1197 extern int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode);
1198 extern int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock);
1199
1200 #define CPM_PIN_INPUT     0
1201 #define CPM_PIN_OUTPUT    1
1202 #define CPM_PIN_PRIMARY   0
1203 #define CPM_PIN_SECONDARY 2
1204 #define CPM_PIN_GPIO      4
1205 #define CPM_PIN_OPENDRAIN 8
1206
1207 void cpm2_set_pin(int port, int pin, int flags);
1208
1209 #endif /* __CPM2__ */
1210 #endif /* __KERNEL__ */