NTFS: Change the runlist terminator of the newly allocated cluster(s) to
[safe/jmp/linux-2.6] / fs / ntfs / ChangeLog
1 ToDo/Notes:
2         - Find and fix bugs.
3         - In between ntfs_prepare/commit_write, need exclusion between
4           simultaneous file extensions.  This is given to us by holding i_sem
5           on the inode.  The only places in the kernel when a file is resized
6           are prepare/commit write and truncate for both of which i_sem is
7           held.  Just have to be careful in readpage/writepage and all other
8           helpers not running under i_sem that we play nice...
9           Also need to be careful with initialized_size extention in
10           ntfs_prepare_write. Basically, just be _very_ careful in this code...
11           UPDATE: The only things that need to be checked are read/writepage
12           which do not hold i_sem.  Note writepage cannot change i_size but it
13           needs to cope with a concurrent i_size change, just like readpage.
14           Also both need to cope with concurrent changes to the other sizes,
15           i.e. initialized/allocated/compressed size, as well.
16         - Implement mft.c::sync_mft_mirror_umount().  We currently will just
17           leave the volume dirty on umount if the final iput(vol->mft_ino)
18           causes a write of any mirrored mft records due to the mft mirror
19           inode having been discarded already.  Whether this can actually ever
20           happen is unclear however so it is worth waiting until someone hits
21           the problem.
22         - Enable the code for setting the NT4 compatibility flag when we start
23           making NTFS 1.2 specific modifications.
24
25 2.1.23-WIP
26
27         - Add printk rate limiting for ntfs_warning() and ntfs_error() when
28           compiled without debug.  This avoids a possible denial of service
29           attack.  Thanks to Carl-Daniel Hailfinger from SuSE for pointing this
30           out.
31         - Fix compilation warnings on ia64.  (Randy Dunlap)
32         - Use i_size_read() in fs/ntfs/attrib.c::ntfs_attr_set().
33         - Use i_size_read() in fs/ntfs/logfile.c::ntfs_{check,empty}_logfile().
34         - Use i_size_read() once and then use the cached value in
35           fs/ntfs/lcnalloc.c::ntfs_cluster_alloc().
36         - Use i_size_read() in fs/ntfs/file.c::ntfs_file_open().
37         - Add size_lock to the ntfs_inode structure.  This is an rw spinlock
38           and it locks against access to the inode sizes.  Note, ->size_lock
39           is also accessed from irq context so you must use the _irqsave and
40           _irqrestore lock and unlock functions, respectively.
41         - Use i_size_read() in fs/ntfs/compress.c at the start of the read and
42           use the cached value afterwards.  Cache the initialized_size in the
43           same way and protect access to the two sizes using the size_lock.
44         - Use i_size_read() in fs/ntfs/dir.c once and then use the cached
45           value afterwards.
46         - Use i_size_read() in fs/ntfs/super.c once and then use the cached
47           value afterwards.  Cache the initialized_size in the same way and
48           protect access to the two sizes using the size_lock.
49         - Minor optimization to fs/ntfs/super.c::ntfs_statfs() and its helpers.
50         - Use i_size_read() in fs/ntfs/inode.c once and then use the cached
51           value afterwards when reading the size of the bitmap inode.
52         - Use i_size_{read,write}() in fs/ntfs/{aops.c,mft.c} and protect
53           access to the i_size and other size fields using the size_lock.
54         - Implement extension of resident files in the regular file write code
55           paths (fs/ntfs/aops.c::ntfs_{prepare,commit}_write()).  At present
56           this only works until the data attribute becomes too big for the mft
57           record after which we abort the write returning -EOPNOTSUPP from
58           ntfs_prepare_write().
59         - Add disable_sparse mount option together with a per volume sparse
60           enable bit which is set appropriately and a per inode sparse disable
61           bit which is preset on some system file inodes as appropriate.
62         - Enforce that sparse support is disabled on NTFS volumes pre 3.0.
63         - Fix a bug in fs/ntfs/runlist.c::ntfs_mapping_pairs_decompress() in
64           the creation of the unmapped runlist element for the base attribute
65           extent.
66         - Split ntfs_map_runlist() into ntfs_map_runlist() and a non-locking
67           helper ntfs_map_runlist_nolock() which is used by ntfs_map_runlist().
68           This allows us to map runlist fragments with the runlist lock already
69           held without having to drop and reacquire it around the call.  Adapt
70           all callers.
71         - Change ntfs_find_vcn() to ntfs_find_vcn_nolock() which takes a locked
72           runlist.  This allows us to find runlist elements with the runlist
73           lock already held without having to drop and reacquire it around the
74           call.  Adapt all callers.
75         - Change time to u64 in time.h::ntfs2utc() as it otherwise generates a
76           warning in the do_div() call on sparc32.  Thanks to Meelis Roos for
77           the report and analysis of the warning.
78         - Fix a nasty runlist merge bug when merging two holes.
79         - Set the ntfs_inode->allocated_size to the real allocated size in the
80           mft record for resident attributes (fs/ntfs/inode.c).
81         - Small readability cleanup to use "a" instead of "ctx->attr"
82           everywhere (fs/ntfs/inode.c).
83         - Make fs/ntfs/namei.c::ntfs_get_{parent,dentry} static and move the
84           definition of ntfs_export_ops from fs/ntfs/super.c to namei.c.  Also,
85           declare ntfs_export_ops in fs/ntfs/ntfs.h.
86         - Correct sparse file handling.  The compressed values need to be
87           checked and set in the ntfs inode as done for compressed files and
88           the compressed size needs to be used for vfs inode->i_blocks instead
89           of the allocated size, again, as done for compressed files.
90         - Add AT_EA in addition to AT_DATA to whitelist for being allowed to be
91           non-resident in fs/ntfs/attrib.c::ntfs_attr_can_be_non_resident().
92         - Add fs/ntfs/attrib.c::ntfs_attr_vcn_to_lcn_nolock() used by the new
93           write code.
94         - Fix bug in fs/ntfs/attrib.c::ntfs_find_vcn_nolock() where after
95           dropping the read lock and taking the write lock we were not checking
96           whether someone else did not already do the work we wanted to do.
97         - Rename fs/ntfs/attrib.c::ntfs_find_vcn_nolock() to
98           ntfs_attr_find_vcn_nolock() and update all callers.
99         - Add fs/ntfs/attrib.[hc]::ntfs_attr_make_non_resident().
100         - Fix sign of various error return values to be negative in
101           fs/ntfs/lcnalloc.c.
102         - Modify ->readpage and ->writepage (fs/ntfs/aops.c) so they detect and
103           handle the case where an attribute is converted from resident to
104           non-resident by a concurrent file write.
105         - Remove checks for NULL before calling kfree() since kfree() does the
106           checking itself.  (Jesper Juhl)
107         - Some utilities modify the boot sector but do not update the checksum.
108           Thus, relax the checking in fs/ntfs/super.c::is_boot_sector_ntfs() to
109           only emit a warning when the checksum is incorrect rather than
110           refusing the mount.  Thanks to Bernd Casimir for pointing this
111           problem out.
112         - Update attribute definition handling.
113         - Add NTFS_MAX_CLUSTER_SIZE and NTFS_MAX_PAGES_PER_CLUSTER constants.
114         - Use NTFS_MAX_CLUSTER_SIZE in super.c instead of hard coding 0x10000.
115         - Use MAX_BUF_PER_PAGE instead of variable sized array allocation for
116           better code generation and one less sparse warning in fs/ntfs/aops.c.
117         - Remove spurious void pointer casts from fs/ntfs/.  (Pekka Enberg)
118         - Use C99 style structure initialization after memory allocation where
119           possible (fs/ntfs/{attrib.c,index.c,super.c}).  Thanks to Al Viro and
120           Pekka Enberg.
121         - Stamp the transaction log ($UsnJrnl), aka user space journal, if it
122           is active on the volume and we are mounting read-write or remounting
123           from read-only to read-write.
124         - Fix a bug in address space operations error recovery code paths where
125           if the runlist was not mapped at all and a mapping error occured we
126           would leave the runlist locked on exit to the function so that the
127           next access to the same file would try to take the lock and deadlock.
128         - Detect the case when Windows has been suspended to disk on the volume
129           to be mounted and if this is the case do not allow (re)mounting
130           read-write.  This is done by parsing hiberfil.sys if present.
131         - Fix several occurences of a bug where we would perform 'var & ~const'
132           with a 64-bit variable and a int, i.e. 32-bit, constant.  This causes
133           the higher order 32-bits of the 64-bit variable to be zeroed.  To fix
134           this cast the 'const' to the same 64-bit type as 'var'.
135         - Change the runlist terminator of the newly allocated cluster(s) to
136           LCN_ENOENT in ntfs_attr_make_non_resident().  Otherwise the runlist
137           code gets confused.
138
139 2.1.22 - Many bug and race fixes and error handling improvements.
140
141         - Improve error handling in fs/ntfs/inode.c::ntfs_truncate().
142         - Change fs/ntfs/inode.c::ntfs_truncate() to return an error code
143           instead of void and provide a helper ntfs_truncate_vfs() for the
144           vfs ->truncate method.
145         - Add a new ntfs inode flag NInoTruncateFailed() and modify
146           fs/ntfs/inode.c::ntfs_truncate() to set and clear it appropriately.
147         - Fix min_size and max_size definitions in ATTR_DEF structure in
148           fs/ntfs/layout.h to be signed.
149         - Add attribute definition handling helpers to fs/ntfs/attrib.[hc]:
150           ntfs_attr_size_bounds_check(), ntfs_attr_can_be_non_resident(), and
151           ntfs_attr_can_be_resident(), which in turn use the new private helper
152           ntfs_attr_find_in_attrdef().
153         - In fs/ntfs/aops.c::mark_ntfs_record_dirty(), take the
154           mapping->private_lock around the dirtying of the buffer heads
155           analagous to the way it is done in __set_page_dirty_buffers().
156         - Ensure the mft record size does not exceed the PAGE_CACHE_SIZE at
157           mount time as this cannot work with the current implementation.
158         - Check for location of attribute name and improve error handling in
159           general in fs/ntfs/inode.c::ntfs_read_locked_inode() and friends.
160         - In fs/ntfs/aops.c::ntfs_writepage(), if the page is fully outside
161           i_size, i.e. race with truncate, invalidate the buffers on the page
162           so that they become freeable and hence the page does not leak.
163         - Remove unused function fs/ntfs/runlist.c::ntfs_rl_merge().  (Adrian
164           Bunk)
165         - Fix stupid bug in fs/ntfs/attrib.c::ntfs_attr_find() that resulted in
166           a NULL pointer dereference in the error code path when a corrupt
167           attribute was found.  (Thanks to Domen Puncer for the bug report.)
168         - Add MODULE_VERSION() to fs/ntfs/super.c.
169         - Make several functions and variables static.  (Adrian Bunk)
170         - Modify fs/ntfs/aops.c::mark_ntfs_record_dirty() so it allocates
171           buffers for the page if they are not present and then marks the
172           buffers belonging to the ntfs record dirty.  This causes the buffers
173           to become busy and hence they are safe from removal until the page
174           has been written out.
175         - Fix stupid bug in fs/ntfs/attrib.c::ntfs_external_attr_find() in the
176           error handling code path that resulted in a BUG() due to trying to
177           unmap an extent mft record when the mapping of it had failed and it
178           thus was not mapped.  (Thanks to Ken MacFerrin for the bug report.)
179         - Drop the runlist lock after the vcn has been read in
180           fs/ntfs/lcnalloc.c::__ntfs_cluster_free().
181         - Rewrite handling of multi sector transfer errors.  We now do not set
182           PageError() when such errors are detected in the async i/o handler
183           fs/ntfs/aops.c::ntfs_end_buffer_async_read().  All users of mst
184           protected attributes now check the magic of each ntfs record as they
185           use it and act appropriately.  This has the effect of making errors
186           granular per ntfs record rather than per page which solves the case
187           where we cannot access any of the ntfs records in a page when a
188           single one of them had an mst error.  (Thanks to Ken MacFerrin for
189           the bug report.)
190         - Fix error handling in fs/ntfs/quota.c::ntfs_mark_quotas_out_of_date()
191           where we failed to release i_sem on the $Quota/$Q attribute inode.
192         - Fix bug in handling of bad inodes in fs/ntfs/namei.c::ntfs_lookup().
193         - Add mapping of unmapped buffers to all remaining code paths, i.e.
194           fs/ntfs/aops.c::ntfs_write_mst_block(), mft.c::ntfs_sync_mft_mirror(),
195           and write_mft_record_nolock().  From now on we require that the
196           complete runlist for the mft mirror is always mapped into memory.
197         - Add creation of buffers to fs/ntfs/mft.c::ntfs_sync_mft_mirror().
198         - Improve error handling in fs/ntfs/aops.c::ntfs_{read,write}_block().
199         - Cleanup fs/ntfs/aops.c::ntfs_{read,write}page() since we know that a
200           resident attribute will be smaller than a page which makes the code
201           simpler.  Also make the code more tolerant to concurrent ->truncate.
202
203 2.1.21 - Fix some races and bugs, rewrite mft write code, add mft allocator.
204
205         - Implement extent mft record deallocation
206           fs/ntfs/mft.c::ntfs_extent_mft_record_free().
207         - Splitt runlist related functions off from attrib.[hc] to runlist.[hc].
208         - Add vol->mft_data_pos and initialize it at mount time.
209         - Rename init_runlist() to ntfs_init_runlist(), ntfs_vcn_to_lcn() to
210           ntfs_rl_vcn_to_lcn(), decompress_mapping_pairs() to
211           ntfs_mapping_pairs_decompress(), ntfs_merge_runlists() to
212           ntfs_runlists_merge() and adapt all callers.
213         - Add fs/ntfs/runlist.[hc]::ntfs_get_nr_significant_bytes(),
214           ntfs_get_size_for_mapping_pairs(), ntfs_write_significant_bytes(),
215           and ntfs_mapping_pairs_build(), adapted from libntfs.
216         - Make fs/ntfs/lcnalloc.c::ntfs_cluster_free_from_rl_nolock() not
217           static and add a declaration for it to lcnalloc.h.
218         - Add fs/ntfs/lcnalloc.h::ntfs_cluster_free_from_rl() which is a static
219           inline wrapper for ntfs_cluster_free_from_rl_nolock() which takes the
220           cluster bitmap lock for the duration of the call.
221         - Add fs/ntfs/attrib.[hc]::ntfs_attr_record_resize().
222         - Implement the equivalent of memset() for an ntfs attribute in
223           fs/ntfs/attrib.[hc]::ntfs_attr_set() and switch
224           fs/ntfs/logfile.c::ntfs_empty_logfile() to using it.
225         - Remove unnecessary casts from LCN_* constants.
226         - Implement fs/ntfs/runlist.c::ntfs_rl_truncate_nolock().
227         - Add MFT_RECORD_OLD as a copy of MFT_RECORD in fs/ntfs/layout.h and
228           change MFT_RECORD to contain the NTFS 3.1+ specific fields.
229         - Add a helper function fs/ntfs/aops.c::mark_ntfs_record_dirty() which
230           marks all buffers belonging to an ntfs record dirty, followed by
231           marking the page the ntfs record is in dirty and also marking the vfs
232           inode containing the ntfs record dirty (I_DIRTY_PAGES).
233         - Switch fs/ntfs/index.h::ntfs_index_entry_mark_dirty() to using the
234           new helper fs/ntfs/aops.c::mark_ntfs_record_dirty() and remove the no
235           longer needed fs/ntfs/index.[hc]::__ntfs_index_entry_mark_dirty().
236         - Move ntfs_{un,}map_page() from ntfs.h to aops.h and fix resulting
237           include errors.
238         - Move the typedefs for runlist_element and runlist from types.h to
239           runlist.h and fix resulting include errors.
240         - Remove unused {__,}format_mft_record() from fs/ntfs/mft.c.
241         - Modify fs/ntfs/mft.c::__mark_mft_record_dirty() to use the helper
242           mark_ntfs_record_dirty() which also changes the behaviour in that we
243           now set the buffers belonging to the mft record dirty as well as the
244           page itself.
245         - Update fs/ntfs/mft.c::write_mft_record_nolock() and sync_mft_mirror()
246           to cope with the fact that there now are dirty buffers in mft pages.
247         - Update fs/ntfs/inode.c::ntfs_write_inode() to also use the helper
248           mark_ntfs_record_dirty() and thus to set the buffers belonging to the
249           mft record dirty as well as the page itself.
250         - Fix compiler warnings on x86-64 in fs/ntfs/dir.c.  (Randy Dunlap,
251           slightly modified by me)
252         - Add fs/ntfs/mft.c::try_map_mft_record() which fails with -EALREADY if
253           the mft record is already locked and otherwise behaves the same way
254           as fs/ntfs/mft.c::map_mft_record().
255         - Modify fs/ntfs/mft.c::write_mft_record_nolock() so that it only
256           writes the mft record if the buffers belonging to it are dirty.
257           Otherwise we assume that it was written out by other means already.
258         - Attempting to write outside initialized size is _not_ a bug so remove
259           the bug check from fs/ntfs/aops.c::ntfs_write_mst_block().  It is in
260           fact required to write outside initialized size when preparing to
261           extend the initialized size.
262         - Map the page instead of using page_address() before writing to it in
263           fs/ntfs/aops.c::ntfs_mft_writepage().
264         - Provide exclusion between opening an inode / mapping an mft record
265           and accessing the mft record in fs/ntfs/mft.c::ntfs_mft_writepage()
266           by setting the page not uptodate throughout ntfs_mft_writepage().
267         - Clear the page uptodate flag in fs/ntfs/aops.c::ntfs_write_mst_block()
268           to ensure noone can see the page whilst the mst fixups are applied.
269         - Add the helper fs/ntfs/mft.c::ntfs_may_write_mft_record() which
270           checks if an mft record may be written out safely obtaining any
271           necessary locks in the process.  This is used by
272           fs/ntfs/aops.c::ntfs_write_mst_block().
273         - Modify fs/ntfs/aops.c::ntfs_write_mst_block() to also work for
274           writing mft records and improve its error handling in the process.
275           Now if any of the records in the page fail to be written out, all
276           other records will be written out instead of aborting completely.
277         - Remove ntfs_mft_aops and update all users to use ntfs_mst_aops.
278         - Modify fs/ntfs/inode.c::ntfs_read_locked_inode() to set the
279           ntfs_mst_aops for all inodes which are NInoMstProtected() and
280           ntfs_aops for all other inodes.
281         - Rename fs/ntfs/mft.c::sync_mft_mirror{,_umount}() to
282           ntfs_sync_mft_mirror{,_umount}() and change their parameters so they
283           no longer require an ntfs inode to be present.  Update all callers.
284         - Cleanup the error handling in fs/ntfs/mft.c::ntfs_sync_mft_mirror().
285         - Clear the page uptodate flag in fs/ntfs/mft.c::ntfs_sync_mft_mirror()
286           to ensure noone can see the page whilst the mst fixups are applied.
287         - Remove the no longer needed fs/ntfs/mft.c::ntfs_mft_writepage() and
288           fs/ntfs/mft.c::try_map_mft_record().
289         - Fix callers of fs/ntfs/aops.c::mark_ntfs_record_dirty() to call it
290           with the ntfs inode which contains the page rather than the ntfs
291           inode the mft record of which is in the page.
292         - Fix race condition in fs/ntfs/inode.c::ntfs_put_inode() by moving the
293           index inode bitmap inode release code from there to
294           fs/ntfs/inode.c::ntfs_clear_big_inode().  (Thanks to Christoph
295           Hellwig for spotting this.)
296         - Fix race condition in fs/ntfs/inode.c::ntfs_put_inode() by taking the
297           inode semaphore around the code that sets ni->itype.index.bmp_ino to
298           NULL and reorganize the code to optimize it a bit.  (Thanks to
299           Christoph Hellwig for spotting this.)
300         - Modify fs/ntfs/aops.c::mark_ntfs_record_dirty() to no longer take the
301           ntfs inode as a parameter as this is confusing and misleading and the
302           needed ntfs inode is available via NTFS_I(page->mapping->host).
303           Adapt all callers to this change.
304         - Modify fs/ntfs/mft.c::write_mft_record_nolock() and
305           fs/ntfs/aops.c::ntfs_write_mst_block() to only check the dirty state
306           of the first buffer in a record and to take this as the ntfs record
307           dirty state.  We cannot look at the dirty state for subsequent
308           buffers because we might be racing with
309           fs/ntfs/aops.c::mark_ntfs_record_dirty().
310         - Move the static inline ntfs_init_big_inode() from fs/ntfs/inode.c to
311           inode.h and make fs/ntfs/inode.c::__ntfs_init_inode() non-static and
312           add a declaration for it to inode.h.  Fix some compilation issues
313           that resulted due to #includes and header file interdependencies.
314         - Simplify setup of i_mode in fs/ntfs/inode.c::ntfs_read_locked_inode().
315         - Add helpers fs/ntfs/layout.h::MK_MREF() and MK_LE_MREF().
316         - Modify fs/ntfs/mft.c::map_extent_mft_record() to only verify the mft
317           record sequence number if it is specified (i.e. not zero).
318         - Add fs/ntfs/mft.[hc]::ntfs_mft_record_alloc() and various helper
319           functions used by it.
320         - Update Documentation/filesystems/ntfs.txt with instructions on how to
321           use the Device-Mapper driver with NTFS ftdisk/LDM raid.  This removes
322           the linear raid problem with the Software RAID / MD driver when one
323           or more of the devices has an odd number of sectors.
324
325 2.1.20 - Fix two stupid bugs introduced in 2.1.18 release.
326
327         - Fix stupid bug in fs/ntfs/attrib.c::ntfs_attr_reinit_search_ctx()
328           where we did not clear ctx->al_entry but it was still set due to
329           changes in ntfs_attr_lookup() and ntfs_external_attr_find() in
330           particular.
331         - Fix another stupid bug in fs/ntfs/attrib.c::ntfs_external_attr_find()
332           where we forgot to unmap the extent mft record when we had finished
333           enumerating an attribute which caused a bug check to trigger when the
334           VFS calls ->clear_inode.
335
336 2.1.19 - Many cleanups, improvements, and a minor bug fix.
337
338         - Update ->setattr (fs/ntfs/inode.c::ntfs_setattr()) to refuse to
339           change the uid, gid, and mode of an inode as we do not support NTFS
340           ACLs yet.
341         - Remove BKL use from ntfs_setattr() syncing up with the rest of the
342           kernel.
343         - Get rid of the ugly transparent union in fs/ntfs/dir.c::ntfs_readdir()
344           and ntfs_filldir() as per suggestion from Al Viro.
345         - Change '\0' and L'\0' to simply 0 as per advice from Linus Torvalds.
346         - Update ->truncate (fs/ntfs/inode.c::ntfs_truncate()) to check if the
347           inode size has changed and to only output an error if so.
348         - Rename fs/ntfs/attrib.h::attribute_value_length() to ntfs_attr_size().
349         - Add le{16,32,64} as well as sle{16,32,64} data types to
350           fs/ntfs/types.h.
351         - Change ntfschar to be le16 instead of u16 in fs/ntfs/types.h.
352         - Add le versions of VCN, LCN, and LSN called leVCN, leLCN, and leLSN,
353           respectively, to fs/ntfs/types.h.
354         - Update endianness conversion macros in fs/ntfs/endian.h to use the
355           new types as appropriate.
356         - Do proper type casting when using sle64_to_cpup() in fs/ntfs/dir.c
357           and index.c.
358         - Add leMFT_REF data type to fs/ntfs/layout.h.
359         - Update all NTFS header files with the new little endian data types.
360           Affected files are fs/ntfs/layout.h, logfile.h, and time.h.
361         - Do proper type casting when using ntfs_is_*_recordp() in
362           fs/ntfs/logfile.c, mft.c, and super.c. 
363         - Fix all the sparse bitwise warnings.  Had to change all the typedef
364           enums storing little endian values to simple enums plus a typedef for
365           the datatype to make sparse happy.
366         - Fix a bug found by the new sparse bitwise warnings where the default
367           upcase table was defined as a pointer to wchar_t rather than ntfschar
368           in fs/ntfs/ntfs.h and super.c.
369         - Change {const_,}cpu_to_le{16,32}(0) to just 0 as suggested by Al Viro.
370
371 2.1.18 - Fix scheduling latencies at mount time as well as an endianness bug.
372
373         - Remove vol->nr_mft_records as it was pretty meaningless and optimize
374           the calculation of total/free inodes as used by statfs().
375         - Fix scheduling latencies in ntfs_fill_super() by dropping the BKL
376           because the code itself is using the ntfs_lock semaphore which
377           provides safe locking.  (Ingo Molnar)
378         - Fix a potential bug in fs/ntfs/mft.c::map_extent_mft_record() that
379           could occur in the future for when we start closing/freeing extent
380           inodes if we don't set base_ni->ext.extent_ntfs_inos to NULL after
381           we free it.
382         - Rename {find,lookup}_attr() to ntfs_attr_{find,lookup}() as well as
383           find_external_attr() to ntfs_external_attr_find() to cleanup the
384           namespace a bit and to be more consistent with libntfs.
385         - Rename {{re,}init,get,put}_attr_search_ctx() to
386           ntfs_attr_{{re,}init,get,put}_search_ctx() as well as the type
387           attr_search_context to ntfs_attr_search_ctx.
388         - Force use of ntfs_attr_find() in ntfs_attr_lookup() when searching
389           for the attribute list attribute itself.
390         - Fix endianness bug in ntfs_external_attr_find().
391         - Change ntfs_{external_,}attr_find() to return 0 on success, -ENOENT
392           if the attribute is not found, and -EIO on real error.  In the case
393           of -ENOENT, the search context is updated to describe the attribute
394           before which the attribute being searched for would need to be
395           inserted if such an action were to be desired and in the case of
396           ntfs_external_attr_find() the search context is also updated to
397           indicate the attribute list entry before which the attribute list
398           entry of the attribute being searched for would need to be inserted
399           if such an action were to be desired.  Also make ntfs_find_attr()
400           static and remove its prototype from attrib.h as it is not used
401           anywhere other than attrib.c.  Update ntfs_attr_lookup() and all
402           callers of ntfs_{external,}attr_{find,lookup}() for the new return
403           values.
404         - Minor cleanup of fs/ntfs/inode.c::ntfs_init_locked_inode().
405
406 2.1.17 - Fix bugs in mount time error code paths and other updates.
407
408         - Implement bitmap modification code (fs/ntfs/bitmap.[hc]).  This
409           includes functions to set/clear a single bit or a run of bits.
410         - Add fs/ntfs/attrib.[hc]::ntfs_find_vcn() which returns the locked
411           runlist element containing a particular vcn.  It also takes care of
412           mapping any needed runlist fragments.
413         - Implement cluster (de-)allocation code (fs/ntfs/lcnalloc.[hc]).
414         - Load attribute definition table from $AttrDef at mount time.
415         - Fix bugs in mount time error code paths involving (de)allocation of
416           the default and volume upcase tables.
417         - Remove ntfs_nr_mounts as it is no longer used.
418
419 2.1.16 - Implement access time updates, file sync, async io, and read/writev.
420
421         - Add support for readv/writev and aio_read/aio_write (fs/ntfs/file.c).
422           This is done by setting the appropriate file operations pointers to
423           the generic helper functions provided by mm/filemap.c.
424         - Implement fsync, fdatasync, and msync both for files (fs/ntfs/file.c)
425           and directories (fs/ntfs/dir.c).
426         - Add support for {a,m,c}time updates to inode.c::ntfs_write_inode().
427           Note, except for the root directory and any other system files opened
428           by the user, the system files will not have their access times
429           updated as they are only accessed at the inode level an hence the
430           file level functions which cause the times to be updated are never
431           invoked.
432
433 2.1.15 - Invalidate quotas when (re)mounting read-write.
434
435         - Add new element itype.index.collation_rule to the ntfs inode
436           structure and set it appropriately in ntfs_read_locked_inode().
437         - Implement a new inode type "index" to allow efficient access to the
438           indices found in various system files and adapt inode handling
439           accordingly (fs/ntfs/inode.[hc]).  An index inode is essentially an
440           attribute inode (NInoAttr() is true) with an attribute type of
441           AT_INDEX_ALLOCATION.  As such, it is no longer allowed to call
442           ntfs_attr_iget() with an attribute type of AT_INDEX_ALLOCATION as
443           there would be no way to distinguish between normal attribute inodes
444           and index inodes.  The function to obtain an index inode is
445           ntfs_index_iget() and it uses the helper function
446           ntfs_read_locked_index_inode().  Note, we do not overload
447           ntfs_attr_iget() as indices consist of multiple attributes so using
448           ntfs_attr_iget() to obtain an index inode would be confusing.
449         - Ensure that there is no overflow when doing page->index <<
450           PAGE_CACHE_SHIFT by casting page->index to s64 in fs/ntfs/aops.c.
451         - Use atomic kmap instead of kmap() in fs/ntfs/aops.c::ntfs_read_page()
452           and ntfs_read_block().
453         - Use case sensitive attribute lookups instead of case insensitive ones.
454         - Lock all page cache pages belonging to mst protected attributes while
455           accessing them to ensure we never see corrupt data while the page is
456           under writeout.
457         - Add framework for generic ntfs collation (fs/ntfs/collation.[hc]).
458           We have ntfs_is_collation_rule_supported() to check if the collation
459           rule you want to use is supported and ntfs_collation() which actually
460           collates two data items.  We currently only support COLLATION_BINARY
461           and COLLATION_NTOFS_ULONG but support for other collation rules will
462           be added as the need arises.
463         - Add a new type, ntfs_index_context, to allow retrieval of an index
464           entry using the corresponding index key.  To get an index context,
465           use ntfs_index_ctx_get() and to release it, use ntfs_index_ctx_put().
466           This also adds a new slab cache for the index contexts.  To lookup a
467           key in an index inode, use ntfs_index_lookup().  After modifying an
468           index entry, call ntfs_index_entry_flush_dcache_page() followed by
469           ntfs_index_entry_mark_dirty() to ensure the changes are written out
470           to disk.  For details see fs/ntfs/index.[hc].  Note, at present, if
471           an index entry is in the index allocation attribute rather than the
472           index root attribute it will not be written out (you will get a
473           warning message about discarded changes instead).
474         - Load the quota file ($Quota) and check if quota tracking is enabled
475           and if so, mark the quotas out of date.  This causes windows to
476           rescan the volume on boot and update all quota entries.
477         - Add a set_page_dirty address space operation for ntfs_m[fs]t_aops.
478           It is simply set to __set_page_dirty_nobuffers() to make sure that
479           running set_page_dirty() on a page containing mft/ntfs records will
480           not affect the dirty state of the page buffers.
481         - Add fs/ntfs/index.c::__ntfs_index_entry_mark_dirty() which sets all
482           buffers that are inside the ntfs record in the page dirty after which
483           it sets the page dirty.  This allows ->writepage to only write the
484           dirty index records rather than having to write all the records in
485           the page.  Modify fs/ntfs/index.h::ntfs_index_entry_mark_dirty() to
486           use this rather than __set_page_dirty_nobuffers().
487         - Implement fs/ntfs/aops.c::ntfs_write_mst_block() which enables the
488           writing of page cache pages belonging to mst protected attributes
489           like the index allocation attribute in directory indices and other
490           indices like $Quota/$Q, etc.  This means that the quota is now marked
491           out of date on all volumes rather than only on ones where the quota
492           defaults entry is in the index root attribute of the $Quota/$Q index.
493
494 2.1.14 - Fix an NFSd caused deadlock reported by several users.
495
496         - Modify fs/ntfs/ntfs_readdir() to copy the index root attribute value
497           to a buffer so that we can put the search context and unmap the mft
498           record before calling the filldir() callback.  We need to do this
499           because of NFSd which calls ->lookup() from its filldir callback()
500           and this causes NTFS to deadlock as ntfs_lookup() maps the mft record
501           of the directory and since ntfs_readdir() has got it mapped already
502           ntfs_lookup() deadlocks.
503
504 2.1.13 - Enable overwriting of resident files and housekeeping of system files.
505
506         - Implement writing of mft records (fs/ntfs/mft.[hc]), which includes
507           keeping the mft mirror in sync with the mft when mirrored mft records
508           are written.  The functions are write_mft_record{,_nolock}().  The
509           implementation is quite rudimentary for now with lots of things not
510           implemented yet but I am not sure any of them can actually occur so
511           I will wait for people to hit each one and only then implement it.
512         - Commit open system inodes at umount time.  This should make it
513           virtually impossible for sync_mft_mirror_umount() to ever be needed.
514         - Implement ->write_inode (fs/ntfs/inode.c::ntfs_write_inode()) for the
515           ntfs super operations.  This gives us inode writing via the VFS inode
516           dirty code paths.  Note:  Access time updates are not implemented yet.
517         - Implement fs/ntfs/mft.[hc]::{,__}mark_mft_record_dirty() and make
518           fs/ntfs/aops.c::ntfs_writepage() and ntfs_commit_write() use it, thus
519           finally enabling resident file overwrite!  (-8  This also includes a
520           placeholder for ->writepage (ntfs_mft_writepage()), which for now
521           just redirties the page and returns.  Also, at umount time, we for
522           now throw away all mft data page cache pages after the last call to
523           ntfs_commit_inode() in the hope that all inodes will have been
524           written out by then and hence no dirty (meta)data will be lost.  We
525           also check for this case and emit an error message telling the user
526           to run chkdsk.
527         - Use set_page_writeback() and end_page_writeback() in the resident
528           attribute code path of fs/ntfs/aops.c::ntfs_writepage() otherwise
529           the radix-tree tag PAGECACHE_TAG_DIRTY remains set even though the
530           page is clean.
531         - Implement ntfs_mft_writepage() so it now checks if any of the mft
532           records in the page are dirty and if so redirties the page and
533           returns.  Otherwise it just returns (after doing set_page_writeback(),
534           unlock_page(), end_page_writeback() or the radix-tree tag
535           PAGECACHE_TAG_DIRTY remains set even though the page is clean), thus
536           alowing the VM to do with the page as it pleases.  Also, at umount
537           time, now only throw away dirty mft (meta)data pages if dirty inodes
538           are present and ask the user to email us if they see this happening.
539         - Add functions ntfs_{clear,set}_volume_flags(), to modify the volume
540           information flags (fs/ntfs/super.c).
541         - Mark the volume dirty when (re)mounting read-write and mark it clean
542           when unmounting or remounting read-only.  If any volume errors are
543           found, the volume is left marked dirty to force chkdsk to run.
544         - Add code to set the NT4 compatibility flag when (re)mounting
545           read-write for newer NTFS versions but leave it commented out for now
546           since we do not make any modifications that are NTFS 1.2 specific yet
547           and since setting this flag breaks Captive-NTFS which is not nice.
548           This code must be enabled once we start writing NTFS 1.2 specific
549           changes otherwise Windows NTFS driver might crash / cause corruption.
550
551 2.1.12 - Fix the second fix to the decompression engine and some cleanups.
552
553         - Add a new address space operations struct, ntfs_mst_aops, for mst
554           protected attributes.  This is because the default ntfs_aops do not
555           make sense with mst protected data and were they to write anything to
556           such an attribute they would cause data corruption so we provide
557           ntfs_mst_aops which does not have any write related operations set.
558         - Cleanup dirty ntfs inode handling (fs/ntfs/inode.[hc]) which also
559           includes an adapted ntfs_commit_inode() and an implementation of
560           ntfs_write_inode() which for now just cleans dirty inodes without
561           writing them (it does emit a warning that this is happening).
562         - Undo the second decompression engine fix (see 2.1.9 release ChangeLog
563           entry) as it was only fixing a theoretical bug but at the same time
564           it badly broke the handling of sparse and uncompressed compression
565           blocks.
566
567 2.1.11 - Driver internal cleanups.
568
569         - Only build logfile.o if building the driver with read-write support.
570         - Really final white space cleanups.
571         - Use generic_ffs() instead of ffs() in logfile.c which allows the
572           log_page_size variable to be optimized by gcc into a constant.
573         - Rename uchar_t to ntfschar everywhere as uchar_t is unsigned 1-byte
574           char as defined by POSIX and as found on some systems.
575
576 2.1.10 - Force read-only (re)mounting of volumes with unsupported volume flags.
577
578         - Finish off the white space cleanups (remove trailing spaces, etc).
579         - Clean up ntfs_fill_super() and ntfs_read_inode_mount() by removing
580           the kludges around the first iget().  Instead of (re)setting ->s_op
581           we have the $MFT inode set up by explicit new_inode() / set ->i_ino /
582           insert_inode_hash() / call ntfs_read_inode_mount() directly.  This
583           kills the need for second super_operations and allows to return error
584           from ntfs_read_inode_mount() without resorting to ugly "poisoning"
585           tricks.  (Al Viro)
586         - Force read-only (re)mounting if any of the following bits are set in
587           the volume information flags:
588                 VOLUME_IS_DIRTY, VOLUME_RESIZE_LOG_FILE,
589                 VOLUME_UPGRADE_ON_MOUNT, VOLUME_DELETE_USN_UNDERWAY,
590                 VOLUME_REPAIR_OBJECT_ID, VOLUME_MODIFIED_BY_CHKDSK
591           To make this easier we define VOLUME_MUST_MOUNT_RO_MASK with all the
592           above bits set so the test is made easy.
593
594 2.1.9 - Fix two bugs in decompression engine.
595
596         - Fix a bug where we would not always detect that we have reached the
597           end of a compression block because we were ending at minus one byte
598           which is effectively the same as being at the end.  The fix is to
599           check whether the uncompressed buffer has been fully filled and if so
600           we assume we have reached the end of the compression block.  A big
601           thank you to Marcin GibuÅ‚a for the bug report, the assistance in
602           tracking down the bug and testing the fix.
603         - Fix a possible bug where when a compressed read is truncated to the
604           end of the file, the offset inside the last page was not truncated.
605
606 2.1.8 - Handle $MFT mirror and $LogFile, improve time handling, and cleanups.
607
608         - Use get_bh() instead of manual atomic_inc() in fs/ntfs/compress.c.
609         - Modify fs/ntfs/time.c::ntfs2utc(), get_current_ntfs_time(), and
610           utc2ntfs() to work with struct timespec instead of time_t on the
611           Linux UTC time side thus preserving the full precision of the NTFS
612           time and only loosing up to 99 nano-seconds in the Linux UTC time.
613         - Move fs/ntfs/time.c to fs/ntfs/time.h and make the time functions
614           static inline.
615         - Remove unused ntfs_dirty_inode().
616         - Cleanup super operations declaration in fs/ntfs/super.c.
617         - Wrap flush_dcache_mft_record_page() in #ifdef NTFS_RW.
618         - Add NInoTestSetFoo() and NInoTestClearFoo() macro magic to
619           fs/ntfs/inode.h and use it to declare NInoTest{Set,Clear}Dirty.
620         - Move typedefs for ntfs_attr and test_t from fs/ntfs/inode.c to
621           fs/ntfs/inode.h so they can be used elsewhere.
622         - Determine the mft mirror size as the number of mirrored mft records
623           and store it in ntfs_volume->mftmirr_size (fs/ntfs/super.c).
624         - Load the mft mirror at mount time and compare the mft records stored
625           in it to the ones in the mft.  Force a read-only mount if the two do
626           not match (fs/ntfs/super.c).
627         - Fix type casting related warnings on 64-bit architectures.  Thanks
628           to Meelis Roos for reporting them.
629         - Move %L to %ll as %L is floating point and %ll is integer which is
630           what we want.
631         - Read the journal ($LogFile) and determine if the volume has been
632           shutdown cleanly and force a read-only mount if not (fs/ntfs/super.c
633           and fs/ntfs/logfile.c).  This is a little bit of a crude check in
634           that we only look at the restart areas and not at the actual log
635           records so that there will be a very small number of cases where we
636           think that a volume is dirty when in fact it is clean.  This should
637           only affect volumes that have not been shutdown cleanly and did not
638           have any pending, non-check-pointed i/o.
639         - If the $LogFile indicates a clean shutdown and a read-write (re)mount
640           is requested, empty $LogFile by overwriting it with 0xff bytes to
641           ensure that Windows cannot cause data corruption by replaying a stale
642           journal after Linux has written to the volume.
643
644 2.1.7 - Enable NFS exporting of mounted NTFS volumes.
645
646         - Set i_generation in the VFS inode from the seq_no of the NTFS inode.
647         - Make ntfs_lookup() NFS export safe, i.e. use d_splice_alias(), etc.
648         - Implement ->get_dentry() in fs/ntfs/namei.c::ntfs_get_dentry() as the
649           default doesn't allow inode number 0 which is a valid inode on NTFS
650           and even if it did allow that it uses iget() instead of ntfs_iget()
651           which makes it useless for us.
652         - Implement ->get_parent() in fs/ntfs/namei.c::ntfs_get_parent() as the
653           default just returns -EACCES which is not very useful.
654         - Define export operations (->s_export_op) for NTFS (ntfs_export_ops)
655           and set them up in the super block at mount time (super.c) this
656           allows mounted NTFS volumes to be exported via NFS.
657         - Add missing return -EOPNOTSUPP; in
658           fs/ntfs/aops.c::ntfs_commit_nonresident_write().
659         - Enforce no atime and no dir atime updates at mount/remount time as
660           they are not implemented yet anyway.
661         - Move a few assignments in fs/ntfs/attrib.c::load_attribute_list() to
662           after a NULL check.  Thanks to Dave Jones for pointing this out.
663
664 2.1.6 - Fix minor bug in handling of compressed directories.
665
666         - Fix bug in handling of compressed directories.  A compressed
667           directory is not really compressed so when we set the ->i_blocks
668           field of a compressed directory inode we were setting it from the
669           non-existing field ni->itype.compressed.size which gave random
670           results...  For directories we now always use ni->allocated_size.
671
672 2.1.5 - Fix minor bug in attribute list attribute handling.
673
674         - Fix bug in attribute list handling.  Actually it is not as much a bug
675           as too much protection in that we were not allowing attribute lists
676           which waste space on disk while Windows XP clearly allows it and in
677           fact creates such attribute lists so our driver was failing.
678         - Update NTFS documentation ready for 2.6 kernel release.
679
680 2.1.4 - Reduce compiler requirements.
681
682         - Remove all uses of unnamed structs and unions in the driver to make
683           old and newer gcc versions happy. Makes it a bit uglier IMO but at
684           least people will stop hassling me about it.
685
686 2.1.3 - Important bug fixes in corner cases.
687
688         - super.c::parse_ntfs_boot_sector(): Correct the check for 64-bit
689           clusters. (Philipp Thomas)
690         - attrib.c::load_attribute_list(): Fix bug when initialized_size is a
691           multiple of the block_size but not the cluster size. (Szabolcs
692           Szakacsits <szaka@sienet.hu>)
693
694 2.1.2 - Important bug fixes aleviating the hangs in statfs.
695
696         - Fix buggy free cluster and free inode determination logic.
697
698 2.1.1 - Minor updates.
699
700         - Add handling for initialized_size != data_size in compressed files.
701         - Reduce function local stack usage from 0x3d4 bytes to just noise in
702           fs/ntfs/upcase.c. (Randy Dunlap <rddunlap@osdl.ord>)
703         - Remove compiler warnings for newer gcc.
704         - Pages are no longer kmapped by mm/filemap.c::generic_file_write()
705           around calls to ->{prepare,commit}_write.  Adapt NTFS appropriately
706           in fs/ntfs/aops.c::ntfs_prepare_nonresident_write() by using
707           kmap_atomic(KM_USER0).
708
709 2.1.0 - First steps towards write support: implement file overwrite.
710
711         - Add configuration option for developmental write support with an
712           appropriately scary configuration help text.
713         - Initial implementation of fs/ntfs/aops.c::ntfs_writepage() and its
714           helper fs/ntfs/aops.c::ntfs_write_block(). This enables mmap(2) based
715           overwriting of existing files on ntfs. Note: Resident files are
716           only written into memory, and not written out to disk at present, so
717           avoid writing to files smaller than about 1kiB.
718         - Initial implementation of fs/ntfs/aops.c::ntfs_prepare_write(), its
719           helper fs/ntfs/aops.c::ntfs_prepare_nonresident_write() and their
720           counterparts, fs/ntfs/aops.c::ntfs_commit_write(), and
721           fs/ntfs/aops.c::ntfs_commit_nonresident_write(), respectively. Also,
722           add generic_file_write() to the ntfs file operations (fs/ntfs/file.c).
723           This enables write(2) based overwriting of existing files on ntfs.
724           Note: As with mmap(2) based overwriting, resident files are only
725           written into memory, and not written out to disk at present, so avoid
726           writing to files smaller than about 1kiB.
727         - Implement ->truncate (fs/ntfs/inode.c::ntfs_truncate()) and
728           ->setattr() (fs/ntfs/inode.c::ntfs_setattr()) inode operations for
729           files with the purpose of intercepting and aborting all i_size
730           changes which we do not support yet. ntfs_truncate() actually only
731           emits a warning message but AFAICS our interception of i_size changes
732           elsewhere means ntfs_truncate() never gets called for i_size changes.
733           It is only called from generic_file_write() when we fail in
734           ntfs_prepare_{,nonresident_}write() in order to discard any
735           instantiated buffers beyond i_size. Thus i_size is not actually
736           changed so our warning message is enough. Unfortunately it is not
737           possible to easily determine if i_size is being changed or not hence
738           we just emit an appropriately worded error message.
739
740 2.0.25 - Small bug fixes and cleanups.
741
742         - Unlock the page in an out of memory error code path in
743           fs/ntfs/aops.c::ntfs_read_block().
744         - If fs/ntfs/aops.c::ntfs_read_page() is called on an uptodate page,
745           just unlock the page and return. (This can happen due to ->writepage
746           clearing PageUptodate() during write out of MstProtected()
747           attributes.
748         - Remove leaked write code again.
749
750 2.0.24 - Cleanups.
751
752         - Treat BUG_ON() as ASSERT() not VERIFY(), i.e. do not use side effects
753           inside BUG_ON(). (Adam J. Richter)
754         - Split logical OR expressions inside BUG_ON() into individual BUG_ON()
755           calls for improved debugging. (Adam J. Richter)
756         - Add errors flag to the ntfs volume state, accessed via
757           NVol{,Set,Clear}Errors(vol).
758         - Do not allow read-write remounts of read-only volumes with errors.
759         - Clarify comment for ntfs file operation sendfile which was added by
760           Christoph Hellwig a while ago (just using generic_file_sendfile())
761           to say that ntfs ->sendfile is only used for the case where the
762           source data is on the ntfs partition and the destination is
763           somewhere else, i.e. nothing we need to concern ourselves with.
764         - Add generic_file_write() as our ntfs file write operation.
765
766 2.0.23 - Major bug fixes (races, deadlocks, non-i386 architectures).
767
768         - Massive internal locking changes to mft record locking. Fixes lock
769           recursion and replaces the mrec_lock read/write semaphore with a
770           mutex. Also removes the now superfluous mft_count. This fixes several
771           race conditions and deadlocks, especially in the future write code.
772         - Fix ntfs over loopback for compressed files by adding an
773           optimization barrier. (gcc was screwing up otherwise ?)
774         - Miscellaneous cleanups all over the code and a fix or two in error
775           handling code paths.
776         Thanks go to Christoph Hellwig for pointing out the following two:
777         - Remove now unused function fs/ntfs/malloc.h::vmalloc_nofs().
778         - Fix ntfs_free() for ia64 and parisc by checking for VMALLOC_END, too.
779
780 2.0.22 - Cleanups, mainly to ntfs_readdir(), and use C99 initializers.
781
782         - Change fs/ntfs/dir.c::ntfs_reddir() to only read/write ->f_pos once
783           at entry/exit respectively.
784         - Use C99 initializers for structures.
785         - Remove unused variable blocks from fs/ntfs/aops.c::ntfs_read_block().
786
787 2.0.21 - Check for, and refuse to work with too large files/directories/volumes.
788
789         - Limit volume size at mount time to 2TiB on architectures where
790           unsigned long is 32-bits (fs/ntfs/super.c::parse_ntfs_boot_sector()).
791           This is the most we can do without overflowing the 32-bit limit of
792           the block device size imposed on us by sb_bread() and sb_getblk()
793           for the time being.
794         - Limit file/directory size at open() time to 16TiB on architectures
795           where unsigned long is 32-bits (fs/ntfs/file.c::ntfs_file_open() and
796           fs/ntfs/dir.c::ntfs_dir_open()). This is the most we can do without
797           overflowing the page cache page index.
798
799 2.0.20 - Support non-resident directory index bitmaps, fix page leak in readdir.
800
801         - Move the directory index bitmap to use an attribute inode instead of
802           having special fields for it inside the ntfs inode structure. This
803           means that the index bitmaps now use the page cache for i/o, too,
804           and also as a side effect we get support for non-resident index
805           bitmaps for free.
806         - Simplify/cleanup error handling in fs/ntfs/dir.c::ntfs_readdir() and
807           fix a page leak that manifested itself in some cases.
808         - Add fs/ntfs/inode.c::ntfs_put_inode(), which we need to release the
809           index bitmap inode on the final iput().
810
811 2.0.19 - Fix race condition, improvements, and optimizations in i/o interface.
812
813         - Apply block optimization added to fs/ntfs/aops.c::ntfs_read_block()
814           to fs/ntfs/compress.c::ntfs_file_read_compressed_block() as well.
815         - Drop the "file" from ntfs_file_read_compressed_block().
816         - Rename fs/ntfs/aops.c::ntfs_enb_buffer_read_async() to
817           ntfs_end_buffer_async_read() (more like the fs/buffer.c counterpart).
818         - Update ntfs_end_buffer_async_read() with the improved logic from
819           its updated counterpart fs/buffer.c::end_buffer_async_read(). Apply
820           further logic improvements to better determine when we set PageError.
821         - Update submission of buffers in fs/ntfs/aops.c::ntfs_read_block() to
822           check for the buffers being uptodate first in line with the updated
823           fs/buffer.c::block_read_full_page(). This plugs a small race
824           condition.
825
826 2.0.18 - Fix race condition in reading of compressed files.
827
828         - There was a narrow window between checking a buffer head for being
829           uptodate and locking it in ntfs_file_read_compressed_block(). We now
830           lock the buffer and then check whether it is uptodate or not.
831
832 2.0.17 - Cleanups and optimizations - shrinking the ToDo list.
833
834         - Modify fs/ntfs/inode.c::ntfs_read_locked_inode() to return an error
835           code and update callers, i.e. ntfs_iget(), to pass that error code
836           up instead of just using -EIO.
837         - Modifications to super.c to ensure that both mount and remount
838           cannot set any write related options when the driver is compiled
839           read-only.
840         - Optimize block resolution in fs/ntfs/aops.c::ntfs_read_block() to
841           cache the current runlist element. This should improve performance
842           when reading very large and/or very fragmented data.
843
844 2.0.16 - Convert access to $MFT/$BITMAP to attribute inode API.
845
846         - Fix a stupid bug introduced in 2.0.15 where we were unmapping the
847           wrong inode in fs/ntfs/inode.c::ntfs_attr_iget().
848         - Fix debugging check in fs/ntfs/aops.c::ntfs_read_block().
849         - Convert $MFT/$BITMAP access to attribute inode API and remove all
850           remnants of the ugly mftbmp address space and operations hack. This
851           means we finally have only one readpage function as well as only one
852           async io completion handler. Yey! The mft bitmap is now just an
853           attribute inode and is accessed from vol->mftbmp_ino just as if it
854           were a normal file. Fake inodes rule. (-:
855
856 2.0.15 - Fake inodes based attribute i/o via the pagecache, fixes and cleanups.
857
858         - Fix silly bug in fs/ntfs/super.c::parse_options() which was causing
859           remounts to fail when the partition had an entry in /etc/fstab and
860           the entry specified the nls= option.
861         - Apply same macro magic used in fs/ntfs/inode.h to fs/ntfs/volume.h to
862           expand all the helper functions NVolFoo(), NVolSetFoo(), and
863           NVolClearFoo().
864         - Move copyright statement from driver initialisation message to
865           module description (fs/super.c). This makes the initialisation
866           message fit on one line and fits in better with rest of kernel.
867         - Update fs/ntfs/attrib.c::map_run_list() to work on both real and
868           attribute inodes, and both for files and directories.
869         - Implement fake attribute inodes allowing all attribute i/o to go via
870           the page cache and to use all the normal vfs/mm functionality:
871           - Add ntfs_attr_iget() and its helper ntfs_read_locked_attr_inode()
872             to fs/ntfs/inode.c.
873           - Add needed cleanup code to ntfs_clear_big_inode().
874         - Merge address space operations for files and directories (aops.c),
875           now just have ntfs_aops:
876           - Rename:
877                 end_buffer_read_attr_async() -> ntfs_end_buffer_read_async(),
878                 ntfs_attr_read_block()       -> ntfs_read_block(),
879                 ntfs_file_read_page()        -> ntfs_readpage().
880           - Rewrite fs/ntfs/aops.c::ntfs_readpage() to work on both real and
881             attribute inodes, and both for files and directories.
882           - Remove obsolete fs/ntfs/aops.c::ntfs_mst_readpage().
883
884 2.0.14 - Run list merging code cleanup, minor locking changes, typo fixes.
885
886         - Change fs/ntfs/super.c::ntfs_statfs() to not rely on BKL by moving
887           the locking out of super.c::get_nr_free_mft_records() and taking and
888           dropping the mftbmp_lock rw_semaphore in ntfs_statfs() itself.
889         - Bring attribute runlist merging code (fs/ntfs/attrib.c) in sync with
890           current userspace ntfs library code. This means that if a merge
891           fails the original runlists are always left unmodified instead of
892           being silently corrupted.
893         - Misc typo fixes.
894
895 2.0.13 - Use iget5_locked() in preparation for fake inodes and small cleanups.
896
897         - Remove nr_mft_bits and the now superfluous union with nr_mft_records
898           from ntfs_volume structure.
899         - Remove nr_lcn_bits and the now superfluous union with nr_clusters
900           from ntfs_volume structure.
901         - Use iget5_locked() and friends instead of conventional iget(). Wrap
902           the call in fs/ntfs/inode.c::ntfs_iget() and update callers of iget()
903           to use ntfs_iget(). Leave only one iget() call at mount time so we
904           don't need an ntfs_iget_mount().
905         - Change fs/ntfs/inode.c::ntfs_new_extent_inode() to take mft_no as an
906           additional argument.
907
908 2.0.12 - Initial cleanup of address space operations following 2.0.11 changes.
909
910         - Merge fs/ntfs/aops.c::end_buffer_read_mst_async() and
911           fs/ntfs/aops.c::end_buffer_read_file_async() into one function
912           fs/ntfs/aops.c::end_buffer_read_attr_async() using NInoMstProtected()
913           to determine whether to apply mst fixups or not.
914         - Above change allows merging fs/ntfs/aops.c::ntfs_file_read_block()
915           and fs/ntfs/aops.c::ntfs_mst_readpage() into one function
916           fs/ntfs/aops.c::ntfs_attr_read_block(). Also, create a tiny wrapper
917           fs/ntfs/aops.c::ntfs_mst_readpage() to transform the parameters from
918           the VFS readpage function prototype to the ntfs_attr_read_block()
919           function prototype.
920
921 2.0.11 - Initial preparations for fake inode based attribute i/o.
922
923         - Move definition of ntfs_inode_state_bits to fs/ntfs/inode.h and
924           do some macro magic (adapted from include/linux/buffer_head.h) to
925           expand all the helper functions NInoFoo(), NInoSetFoo(), and
926           NInoClearFoo().
927         - Add new flag to ntfs_inode_state_bits: NI_Sparse.
928         - Add new fields to ntfs_inode structure to allow use of fake inodes
929           for attribute i/o: type, name, name_len. Also add new state bits:
930           NI_Attr, which, if set, indicates the inode is a fake inode, and
931           NI_MstProtected, which, if set, indicates the attribute uses multi
932           sector transfer protection, i.e. fixups need to be applied after
933           reads and before/after writes.
934         - Rename fs/ntfs/inode.c::ntfs_{new,clear,destroy}_inode() to
935           ntfs_{new,clear,destroy}_extent_inode() and update callers.
936         - Use ntfs_clear_extent_inode() in fs/ntfs/inode.c::__ntfs_clear_inode()
937           instead of ntfs_destroy_extent_inode().
938         - Cleanup memory deallocations in {__,}ntfs_clear_{,big_}inode().
939         - Make all operations on ntfs inode state bits use the NIno* functions.
940         - Set up the new ntfs inode fields and state bits in
941           fs/ntfs/inode.c::ntfs_read_inode() and add appropriate cleanup of
942           allocated memory to __ntfs_clear_inode().
943         - Cleanup ntfs_inode structure a bit for better ordering of elements
944           w.r.t. their size to allow better packing of the structure in memory.
945
946 2.0.10 - There can only be 2^32 - 1 inodes on an NTFS volume.
947
948         - Add check at mount time to verify that the number of inodes on the
949           volume does not exceed 2^32 - 1, which is the maximum allowed for
950           NTFS according to Microsoft.
951         - Change mft_no member of ntfs_inode structure to be unsigned long.
952           Update all users. This makes ntfs_inode->mft_no just a copy of struct
953           inode->i_ino. But we can't just always use struct inode->i_ino and
954           remove mft_no because extent inodes do not have an attached struct
955           inode.
956
957 2.0.9 - Decompression engine now uses a single buffer and other cleanups.
958
959         - Change decompression engine to use a single buffer protected by a
960           spin lock instead of per-CPU buffers. (Rusty Russell)
961         - Do not update cb_pos when handling a partial final page during
962           decompression of a sparse compression block, as the value is later
963           reset without being read/used. (Rusty Russell)
964         - Switch to using the new KM_BIO_SRC_IRQ for atomic kmap()s. (Andrew
965           Morton)
966         - Change buffer size in ntfs_readdir()/ntfs_filldir() to use
967           NLS_MAX_CHARSET_SIZE which makes the buffers almost 1kiB each but
968           it also makes everything safer so it is a good thing.
969         - Miscellaneous minor cleanups to comments.
970
971 2.0.8 - Major updates for handling of case sensitivity and dcache aliasing.
972
973         Big thanks go to Al Viro and other inhabitants of #kernel for investing
974         their time to discuss the case sensitivity and dcache aliasing issues.
975
976         - Remove unused source file fs/ntfs/attraops.c.
977         - Remove show_inodes mount option(s), thus dropping support for
978           displaying of short file names.
979         - Remove deprecated mount option posix.
980         - Restore show_sys_files mount option.
981         - Add new mount option case_sensitive, to determine if the driver
982           treats file names as case sensitive or not. If case sensitive, create
983           file names in the POSIX namespace. Otherwise create file names in the
984           LONG/WIN32 namespace. Note, files remain accessible via their short
985           file name, if it exists.
986         - Remove really dumb logic bug in boot sector recovery code.
987         - Fix dcache aliasing issues wrt short/long file names via changes
988           to fs/ntfs/dir.c::ntfs_lookup_inode_by_name() and
989           fs/ntfs/namei.c::ntfs_lookup():
990           - Add additional argument to ntfs_lookup_inode_by_name() in which we
991             return information about the matching file name if the case is not
992             matching or the match is a short file name. See comments above the
993             function definition for details.
994           - Change ntfs_lookup() to only create dcache entries for the correctly
995             cased file name and only for the WIN32 namespace counterpart of DOS
996             namespace file names. This ensures we have only one dentry per
997             directory and also removes all dcache aliasing issues between short
998             and long file names once we add write support. See comments above
999             function for details.
1000         - Fix potential 1 byte overflow in fs/ntfs/unistr.c::ntfs_ucstonls().
1001
1002 2.0.7 - Minor cleanups and updates for changes in core kernel code.
1003
1004         - Remove much of the NULL struct element initializers.
1005         - Various updates to make compatible with recent kernels.
1006         - Remove defines of MAX_BUF_PER_PAGE and include linux/buffer_head.h
1007           in fs/ntfs/ntfs.h instead.
1008         - Remove no longer needed KERNEL_VERSION checks. We are now in the
1009           kernel proper so they are no longer needed.
1010
1011 2.0.6 - Major bugfix to make compatible with other kernel changes.
1012
1013         - Initialize the mftbmp address space properly now that there are more
1014           fields in the struct address_space. This was leading to hangs and
1015           oopses on umount since 2.5.12 because of changes to other parts of
1016           the kernel. We probably want a kernel generic init_address_space()
1017           function...
1018         - Drop BKL from ntfs_readdir() after consultation with Al Viro. The
1019           only caller of ->readdir() is vfs_readdir() which holds i_sem during
1020           the call, and i_sem is sufficient protection against changes in the
1021           directory inode (including ->i_size).
1022         - Use generic_file_llseek() for directories (as opposed to
1023           default_llseek()) as this downs i_sem instead of the BKL which is
1024           what we now need for exclusion against ->f_pos changes considering we
1025           no longer take the BKL in ntfs_readdir().
1026
1027 2.0.5 - Major bugfix. Buffer overflow in extent inode handling.
1028
1029         - No need to set old blocksize in super.c::ntfs_fill_super() as the
1030           VFS does so via invocation of deactivate_super() calling
1031           fs->fill_super() calling block_kill_super() which does it.
1032         - BKL moved from VFS into dir.c::ntfs_readdir(). (Linus Torvalds)
1033           -> Do we really need it? I don't think so as we have exclusion on
1034           the directory ntfs_inode rw_semaphore mrec_lock. We mmight have to
1035           move the ->f_pos accesses under the mrec_lock though. Check this...
1036         - Fix really, really, really stupid buffer overflow in extent inode
1037           handling in mft.c::map_extent_mft_record().
1038
1039 2.0.4 - Cleanups and updates for kernel 2.5.11.
1040
1041         - Add documentation on how to use the MD driver to be able to use NTFS
1042           stripe and volume sets in Linux and generally cleanup documentation
1043           a bit.
1044         Remove all uses of kdev_t in favour of struct block_device *:
1045         - Change compress.c::ntfs_file_read_compressed_block() to use
1046           sb_getblk() instead of getblk().
1047         - Change super.c::ntfs_fill_super() to use bdev_hardsect_size() instead
1048           of get_hardsect_size().
1049         - No need to get old blocksize in super.c::ntfs_fill_super() as
1050           fs/super.c::get_sb_bdev() already does this.
1051         - Set bh->b_bdev instead of bh->b_dev throughout aops.c.
1052
1053 2.0.3 - Small bug fixes, cleanups, and performance improvements.
1054
1055         - Remove some dead code from mft.c.
1056         - Optimize readpage and read_block functions throughout aops.c so that
1057           only initialized blocks are read. Non-initialized ones have their
1058           buffer head mapped, zeroed, and set up to date, without scheduling
1059           any i/o. Thanks to Al Viro for advice on how to avoid the device i/o.
1060         Thanks go to Andrew Morton for spotting the below:
1061         - Fix buglet in allocate_compression_buffers() error code path.
1062         - Call flush_dcache_page() after modifying page cache page contents in
1063           ntfs_file_readpage().
1064         - Check for existence of page buffers throughout aops.c before calling
1065           create_empty_buffers(). This happens when an I/O error occurs and the
1066           read is retried. (It also happens once writing is implemented so that
1067           needed doing anyway but I had left it for later...)
1068         - Don't BUG_ON() uptodate and/or mapped buffers throughout aops.c in
1069           readpage and read_block functions. Reasoning same as above (i.e. I/O
1070           error retries and future write code paths.)
1071
1072 2.0.2 - Minor updates and cleanups.
1073
1074         - Cleanup: rename mst.c::__post_read_mst_fixup to post_write_mst_fixup
1075           and cleanup the code a bit, removing the unused size parameter.
1076         - Change default fmask to 0177 and update documentation.
1077         - Change attrib.c::get_attr_search_ctx() to return the search context
1078           directly instead of taking the address of a pointer. A return value
1079           of NULL means the allocation failed. Updated all callers
1080           appropriately.
1081         - Update to 2.5.9 kernel (preserving backwards compatibility) by
1082           replacing all occurences of page->buffers with page_buffers(page).
1083         - Fix minor bugs in runlist merging, also minor cleanup.
1084         - Updates to bootsector layout and mft mirror contents descriptions.
1085         - Small bug fix in error detection in unistr.c and some cleanups.
1086         - Grow name buffer allocations in unistr.c in aligned mutlipled of 64
1087           bytes.
1088
1089 2.0.1 - Minor updates.
1090
1091         - Make default umask correspond to documentation.
1092         - Improve documentation.
1093         - Set default mode to include execute bit. The {u,f,d}mask can be used
1094           to take it away if desired. This allows binaries to be executed from
1095           a mounted ntfs partition.
1096
1097 2.0.0 - New version number. Remove TNG from the name. Now in the kernel.
1098
1099         - Add kill_super, just keeping up with the vfs changes in the kernel.
1100         - Repeat some changes from tng-0.0.8 that somehow got lost on the way
1101           from the CVS import into BitKeeper.
1102         - Begin to implement proper handling of allocated_size vs
1103           initialized_size vs data_size (i.e. i_size). Done are
1104           mft.c::ntfs_mft_readpage(), aops.c::end_buffer_read_index_async(),
1105           and attrib.c::load_attribute_list().
1106         - Lock the runlist in attrib.c::load_attribute_list() while using it.
1107         - Fix memory leak in ntfs_file_read_compressed_block() and generally
1108           clean up compress.c a little, removing some uncommented/unused debug
1109           code.
1110         - Tidy up dir.c a little bit.
1111         - Don't bother getting the runlist in inode.c::ntfs_read_inode().
1112         - Merge mft.c::ntfs_mft_readpage() and aops.c::ntfs_index_readpage()
1113           creating aops.c::ntfs_mst_readpage(), improving the handling of
1114           holes and overflow in the process and implementing the correct
1115           equivalent of ntfs_file_get_block() in ntfs_mst_readpage() itself.
1116           I am aiming for correctness at the moment. Modularisation can come
1117           later.
1118         - Rename aops.c::end_buffer_read_index_async() to
1119           end_buffer_read_mst_async() and optimize the overflow checking and
1120           handling.
1121         - Use the host of the mftbmp address space mapping to hold the ntfs
1122           volume. This is needed so the async i/o completion handler can
1123           retrieve a pointer to the volume. Hopefully this will not cause
1124           problems elsewhere in the kernel... Otherwise will need to use a
1125           fake inode.
1126         - Complete implementation of proper handling of allocated_size vs
1127           initialized_size vs data_size (i.e. i_size) in whole driver.
1128           Basically aops.c is now completely rewritten.
1129         - Change NTFS driver name to just NTFS and set version number to 2.0.0
1130           to make a clear distinction from the old driver which is still on
1131           version 1.1.22.
1132
1133 tng-0.0.8 - 08/03/2002 - Now using BitKeeper, http://linux-ntfs.bkbits.net/
1134
1135         - Replace bdevname(sb->s_dev) with sb->s_id.
1136         - Remove now superfluous new-line characters in all callers of
1137           ntfs_debug().
1138         - Apply kludge in ntfs_read_inode(), setting i_nlink to 1 for
1139           directories. Without this the "find" utility gets very upset which is
1140           fair enough as Linux/Unix do not support directory hard links.
1141         - Further runlist merging work. (Richard Russon)
1142         - Backwards compatibility for gcc-2.95. (Richard Russon)
1143         - Update to kernel 2.5.5-pre1 and rediff the now tiny patch.
1144         - Convert to new filesystem declaration using ->ntfs_get_sb() and
1145           replacing ntfs_read_super() with ntfs_fill_super().
1146         - Set s_maxbytes to MAX_LFS_FILESIZE to avoid page cache page index
1147           overflow on 32-bit architectures.
1148         - Cleanup upcase loading code to use ntfs_(un)map_page().
1149         - Disable/reenable preemtion in critical sections of compession engine.
1150         - Replace device size determination in ntfs_fill_super() with
1151           sb->s_bdev->bd_inode->i_size (in bytes) and remove now superfluous
1152           function super.c::get_nr_blocks().
1153         - Implement a mount time option (show_inodes) allowing choice of which
1154           types of inode names readdir() returns and modify ntfs_filldir()
1155           accordingly. There are several parameters to show_inodes:
1156                 system: system files
1157                 win32:  long file names (including POSIX file names) [DEFAULT]
1158                 long:   same as win32
1159                 dos:    short file names only (excluding POSIX file names)
1160                 short:  same as dos
1161                 posix:  same as both win32 and dos
1162                 all:    all file names
1163           Note that the options are additive, i.e. specifying:
1164                 -o show_inodes=system,show_inodes=win32,show_inodes=dos
1165           is the same as specifying:
1166                 -o show_inodes=all
1167           Note that the "posix" and "all" options will show all directory
1168           names, BUT the link count on each directory inode entry is set to 1,
1169           due to Linux not supporting directory hard links. This may well
1170           confuse some userspace applications, since the directory names will
1171           have the same inode numbers. Thus it is NOT advisable to use the
1172           "posix" or "all" options. We provide them only for completeness sake.
1173         - Add copies of allocated_size, initialized_size, and compressed_size to
1174           the ntfs inode structure and set them up in
1175           inode.c::ntfs_read_inode(). These reflect the unnamed data attribute
1176           for files and the index allocation attribute for directories.
1177         - Add copies of allocated_size and initialized_size to ntfs inode for
1178           $BITMAP attribute of large directories and set them up in
1179           inode.c::ntfs_read_inode().
1180         - Add copies of allocated_size and initialized_size to ntfs volume for
1181           $BITMAP attribute of $MFT and set them up in
1182           super.c::load_system_files().
1183         - Parse deprecated ntfs driver options (iocharset, show_sys_files,
1184           posix, and utf8) and tell user what the new options to use are. Note
1185           we still do support them but they will be removed with kernel 2.7.x.
1186         - Change all occurences of integer long long printf formatting to hex
1187           as printk() will not support long long integer format if/when the
1188           div64 patch goes into the kernel.
1189         - Make slab caches have stable names and change the names to what they
1190           were intended to be. These changes are required/made possible by the
1191           new slab cache name handling which removes the length limitation by
1192           requiring the caller of kmem_cache_create() to supply a stable name
1193           which is then referenced but not copied.
1194         - Rename run_list structure to run_list_element and create a new
1195           run_list structure containing a pointer to a run_list_element
1196           structure and a read/write semaphore. Adapt all users of runlists
1197           to new scheme and take and release the lock as needed. This fixes a
1198           nasty race as the run_list changes even when inodes are locked for
1199           reading and even when the inode isn't locked at all, so we really
1200           needed the serialization. We use a semaphore rather than a spinlock
1201           as memory allocations can sleep and doing everything GFP_ATOMIC
1202           would be silly.
1203         - Cleanup read_inode() removing all code checking for lowest_vcn != 0.
1204           This can never happen due to the nature of lookup_attr() and how we
1205           support attribute lists. If it did happen it would imply the inode
1206           being corrupt.
1207         - Check for lowest_vcn != 0 in ntfs_read_inode() and mark the inode as
1208           bad if found.
1209         - Update to 2.5.6-pre2 changes in struct address_space.
1210         - Use parent_ino() when accessing d_parent inode number in dir.c.
1211         - Import Sourceforge CVS repository into BitKeeper repository:
1212                 http://linux-ntfs.bkbits.net/ntfs-tng-2.5
1213         - Update fs/Makefile, fs/Config.help, fs/Config.in, and
1214           Documentation/filesystems/ntfs.txt for NTFS TNG.
1215         - Create kernel configuration option controlling whether debugging
1216           is enabled or not.
1217         - Add the required export of end_buffer_io_sync() from the patches
1218           directory to the kernel code.
1219         - Update inode.c::ntfs_show_options() with show_inodes mount option.
1220         - Update errors mount option.
1221
1222 tng-0.0.7 - 13/02/2002 - The driver is now feature complete for read-only!
1223
1224         - Cleanup mft.c and it's debug/error output in particular. Fix a minor
1225           bug in mapping of extent inodes. Update all the comments to fit all
1226           the recent code changes.
1227         - Modify vcn_to_lcn() to cope with entirely unmapped runlists.
1228         - Cleanups in compress.c, mostly comments and folding help.
1229         - Implement attrib.c::map_run_list() as a generic helper.
1230         - Make compress.c::ntfs_file_read_compressed_block() use map_run_list()
1231           thus making code shorter and enabling attribute list support.
1232         - Cleanup incorrect use of [su]64 with %L printf format specifier in
1233           all source files. Type casts to [unsigned] long long added to correct
1234           the mismatches (important for architectures which have long long not
1235           being 64 bits).
1236         - Merge async io completion handlers for directory indexes and $MFT
1237           data into one by setting the index_block_size{_bits} of the ntfs
1238           inode for $MFT to the mft_record_size{_bits} of the ntfs_volume.
1239         - Cleanup aops.c, update comments.
1240         - Make ntfs_file_get_block() use map_run_list() so all files now
1241           support attribute lists.
1242         - Make ntfs_dir_readpage() almost verbatim copy of
1243           block_read_full_page() by using ntfs_file_get_block() with only real
1244           difference being the use of our own async io completion handler
1245           rather than the default one, thus reducing the amount of code and
1246           automatically enabling attribute list support for directory indices.
1247         - Fix bug in load_attribute_list() - forgot to call brelse in error
1248           code path.
1249         - Change parameters to find_attr() and lookup_attr(). We no longer
1250           pass in the upcase table and its length. These can be gotten from
1251           ctx->ntfs_ino->vol->upcase{_len}. Update all callers.
1252         - Cleanups in attrib.c.
1253         - Implement merging of runlists, attrib.c::merge_run_lists() and its
1254           helpers. (Richard Russon)
1255         - Attribute lists part 2, attribute extents and multi part runlists:
1256           enable proper support for LCN_RL_NOT_MAPPED and automatic mapping of
1257           further runlist parts via attrib.c::map_run_list().
1258         - Tiny endianness bug fix in decompress_mapping_pairs().
1259
1260 tng-0.0.6 - Encrypted directories, bug fixes, cleanups, debugging enhancements.
1261
1262         - Enable encrypted directories. (Their index root is marked encrypted
1263           to indicate that new files in that directory should be created
1264           encrypted.)
1265         - Fix bug in NInoBmpNonResident() macro. (Cut and paste error.)
1266         - Enable $Extend system directory. Most (if not all) extended system
1267           files do not have unnamed data attributes so ntfs_read_inode() had to
1268           special case them but that is ok, as the special casing recovery
1269           happens inside an error code path so there is zero slow down in the
1270           normal fast path. The special casing is done by introducing a new
1271           function inode.c::ntfs_is_extended_system_file() which checks if any
1272           of the hard links in the inode point to $Extend as being their parent
1273           directory and if they do we assume this is an extended system file.
1274         - Create a sysctl/proc interface to allow {dis,en}abling of debug output
1275           when compiled with -DDEBUG. Default is debug messages to be disabled.
1276           To enable them, one writes a non-zero value to /proc/sys/fs/ntfs-debug
1277           (if /proc is enabled) or uses sysctl(2) to effect the same (if sysctl
1278           interface is enabled). Inspired by old ntfs driver.
1279         - Add debug_msgs insmod/kernel boot parameter to set whether debug
1280           messages are {dis,en}abled. This is useful to enable debug messages
1281           during ntfs initialization and is the only way to activate debugging
1282           when the sysctl interface is not enabled.
1283         - Cleanup debug output in various places.
1284         - Remove all dollar signs ($) from the source (except comments) to
1285           enable compilation on architectures whose gcc compiler does not
1286           support dollar signs in the names of variables/constants. Attribute
1287           types now start with AT_ instead of $ and $I30 is now just I30.
1288         - Cleanup ntfs_lookup() and add consistency check of sequence numbers.
1289         - Load complete runlist for $MFT/$BITMAP during mount and cleanup
1290           access functions. This means we now cope with $MFT/$BITMAP being
1291           spread accross several mft records.
1292         - Disable modification of mft_zone_multiplier on remount. We can always
1293           reenable this later on if we really want to, but we will need to make
1294           sure we readjust the mft_zone size / layout accordingly.
1295
1296 tng-0.0.5 - Modernize for 2.5.x and further in line-ing with Al Viro's comments.
1297
1298         - Use sb_set_blocksize() instead of set_blocksize() and verify the
1299           return value.
1300         - Use sb_bread() instead of bread() throughout.
1301         - Add index_vcn_size{_bits} to ntfs_inode structure to store the size
1302           of a directory index block vcn. Apply resulting simplifications in
1303           dir.c everywhere.
1304         - Fix a small bug somewhere (but forgot what it was).
1305         - Change ntfs_{debug,error,warning} to enable gcc to do type checking
1306           on the printf-format parameter list and fix bugs reported by gcc
1307           as a result. (Richard Russon)
1308         - Move inode allocation strategy to Al's new stuff but maintain the
1309           divorce of ntfs_inode from struct inode. To achieve this we have two
1310           separate slab caches, one for big ntfs inodes containing a struct
1311           inode and pure ntfs inodes and at the same time fix some faulty
1312           error code paths in ntfs_read_inode().
1313         - Show mount options in proc (inode.c::ntfs_show_options()).
1314
1315 tng-0.0.4 - Big changes, getting in line with Al Viro's comments.
1316
1317         - Modified (un)map_mft_record functions to be common for read and write
1318           case. To specify which is which, added extra parameter at front of
1319           parameter list. Pass either READ or WRITE to this, each has the
1320           obvious meaning.
1321         - General cleanups to allow for easier folding in vi.
1322         - attrib.c::decompress_mapping_pairs() now accepts the old runlist
1323           argument, and invokes attrib.c::merge_run_lists() to merge the old
1324           and the new runlists.
1325         - Removed attrib.c::find_first_attr().
1326         - Implemented loading of attribute list and complete runlist for $MFT.
1327           This means we now cope with $MFT being spread across several mft
1328           records.
1329         - Adapt to 2.5.2-pre9 and the changed create_empty_buffers() syntax.
1330         - Adapt major/minor/kdev_t/[bk]devname stuff to new 2.5.x kernels.
1331         - Make ntfs_volume be allocated via kmalloc() instead of using a slab
1332           cache. There are too little ntfs_volume structures at any one time
1333           to justify a private slab cache.
1334         - Fix bogus kmap() use in async io completion. Now use kmap_atomic().
1335           Use KM_BIO_IRQ on advice from IRC/kernel...
1336         - Use ntfs_map_page() in map_mft_record() and create ->readpage method
1337           for reading $MFT (ntfs_mft_readpage). In the process create dedicated
1338           address space operations (ntfs_mft_aops) for $MFT inode mapping. Also
1339           removed the now superfluous exports from the kernel core patch.
1340         - Fix a bug where kfree() was used insted of ntfs_free().
1341         - Change map_mft_record() to take ntfs_inode as argument instead of
1342           vfs inode. Dito for unmap_mft_record(). Adapt all callers.
1343         - Add pointer to ntfs_volume to ntfs_inode.
1344         - Add mft record number and sequence number to ntfs_inode. Stop using
1345           i_ino and i_generation for in-driver purposes.
1346         - Implement attrib.c::merge_run_lists(). (Richard Russon)
1347         - Remove use of proper inodes by extent inodes. Move i_ino and
1348           i_generation to ntfs_inode to do this. Apply simplifications that
1349           result and remove iget_no_wait(), etc.
1350         - Pass ntfs_inode everywhere in the driver (used to be struct inode).
1351         - Add reference counting in ntfs_inode for the ntfs inode itself and
1352           for the mapped mft record.
1353         - Extend mft record mapping so we can (un)map extent mft records (new
1354           functions (un)map_extent_mft_record), and so mappings are reference
1355           counted and don't have to happen twice if already mapped - just ref
1356           count increases.
1357         - Add -o iocharset as alias to -o nls for backwards compatibility.
1358         - The latest core patch is now tiny. In fact just a single additional
1359           export is necessary over the base kernel.
1360
1361 tng-0.0.3 - Cleanups, enhancements, bug fixes.
1362
1363         - Work on attrib.c::decompress_mapping_pairs() to detect base extents
1364           and setup the runlist appropriately using knowledge provided by the
1365           sizes in the base attribute record.
1366         - Balance the get_/put_attr_search_ctx() calls so we don't leak memory
1367           any more.
1368         - Introduce ntfs_malloc_nofs() and ntfs_free() to allocate/free a single
1369           page or use vmalloc depending on the amount of memory requested.
1370         - Cleanup error output. The __FUNCTION__ "(): " is now added
1371           automatically. Introduced a new header file debug.h to support this
1372           and also moved ntfs_debug() function into it.
1373         - Make reading of compressed files more intelligent and especially get
1374           rid of the vmalloc_nofs() from readpage(). This now uses per CPU
1375           buffers (allocated at first mount with cluster size <= 4kiB and
1376           deallocated on last umount with cluster size <= 4kiB), and
1377           asynchronous io for the compressed data using a list of buffer heads.
1378           Er, we use synchronous io as async io only works on whole pages
1379           covered by buffers and not on individual buffer heads...
1380         - Bug fix for reading compressed files with sparse compression blocks.
1381
1382 tng-0.0.2 - Now handles larger/fragmented/compressed volumes/files/dirs.
1383
1384         - Fixed handling of directories when cluster size exceeds index block
1385           size.
1386         - Hide DOS only name space directory entries from readdir() but allow
1387           them in lookup(). This should fix the problem that Linux doesn't
1388           support directory hard links, while still allowing access to entries
1389           via their short file name. This also has the benefit of mimicking
1390           what Windows users are used to, so it is the ideal solution.
1391         - Implemented sync_page everywhere so no more hangs in D state when
1392           waiting for a page.
1393         - Stop using bforget() in favour of brelse().
1394         - Stop locking buffers unnecessarily.
1395         - Implemented compressed files (inode->mapping contains uncompressed
1396           data, raw compressed data is currently bread() into a vmalloc()ed
1397           memory buffer).
1398         - Enable compressed directories. (Their index root is marked compressed
1399           to indicate that new files in that directory should be created
1400           compressed.)
1401         - Use vsnprintf rather than vsprintf in the ntfs_error and ntfs_warning
1402           functions. (Thanks to Will Dyson for pointing this out.)
1403         - Moved the ntfs_inode and ntfs_volume (the former ntfs_inode_info and
1404           ntfs_sb_info) out of the common inode and super_block structures and
1405           started using the generic_ip and generic_sbp pointers instead. This
1406           makes ntfs entirely private with respect to the kernel tree.
1407         - Detect compiler version and abort with error message if gcc less than
1408           2.96 is used.
1409         - Fix bug in name comparison function in unistr.c.
1410         - Implement attribute lists part 1, the infrastructure: search contexts
1411           and operations, find_external_attr(), lookup_attr()) and make the
1412           code use the infrastructure.
1413         - Fix stupid buffer overflow bug that became apparent on larger run
1414           list containing attributes.
1415         - Fix bugs in readdir() that became apparent on larger directories.
1416
1417         The driver is now really useful and survives the test
1418                 find . -type f -exec md5sum "{}" \;
1419         without any error messages on a over 1GiB sized partition with >16k
1420         files on it, including compressed files and directories and many files
1421         and directories with attribute lists.
1422
1423 tng-0.0.1 - The first useful version.
1424
1425         - Added ntfs_lookup().
1426         - Added default upcase generation and handling.
1427         - Added compile options to be shown on module init.
1428         - Many bug fixes that were "hidden" before.
1429         - Update to latest kernel.
1430         - Added ntfs_readdir().
1431         - Added file operations for mmap(), read(), open() and llseek(). We just
1432           use the generic ones. The whole point of going through implementing
1433           readpage() methods and where possible get_block() call backs is that
1434           this allows us to make use of the generic high level methods provided
1435           by the kernel.
1436
1437         The driver is now actually useful! Yey. (-: It undoubtedly has got bugs
1438         though and it doesn't implement accesssing compressed files yet. Also,
1439         accessing files with attribute list attributes is not implemented yet
1440         either. But for small or simple filesystems it should work and allow
1441         you to list directories, use stat on directory entries and the file
1442         system, open, read, mmap and llseek around in files. A big mile stone
1443         has been reached!
1444
1445 tng-0.0.0 - Initial version tag.
1446
1447         Initial driver implementation. The driver can mount and umount simple
1448         NTFS filesystems (i.e. ones without attribute lists in the system
1449         files). If the mount fails there might be problems in the error handling
1450         code paths, so be warned. Otherwise it seems to be loading the system
1451         files nicely and the mft record read mapping/unmapping seems to be
1452         working nicely, too. Proof of inode metadata in the page cache and non-
1453         resident file unnamed stream data in the page cache concepts is thus
1454         complete.