dlm: remove bkl
[safe/jmp/linux-2.6] / fs / dlm / user.c
1 /*
2  * Copyright (C) 2006-2008 Red Hat, Inc.  All rights reserved.
3  *
4  * This copyrighted material is made available to anyone wishing to use,
5  * modify, copy, or redistribute it subject to the terms and conditions
6  * of the GNU General Public License v.2.
7  */
8
9 #include <linux/miscdevice.h>
10 #include <linux/init.h>
11 #include <linux/wait.h>
12 #include <linux/module.h>
13 #include <linux/file.h>
14 #include <linux/fs.h>
15 #include <linux/poll.h>
16 #include <linux/signal.h>
17 #include <linux/spinlock.h>
18 #include <linux/dlm.h>
19 #include <linux/dlm_device.h>
20
21 #include "dlm_internal.h"
22 #include "lockspace.h"
23 #include "lock.h"
24 #include "lvb_table.h"
25 #include "user.h"
26
27 static const char name_prefix[] = "dlm";
28 static const struct file_operations device_fops;
29 static atomic_t dlm_monitor_opened;
30 static int dlm_monitor_unused = 1;
31
32 #ifdef CONFIG_COMPAT
33
34 struct dlm_lock_params32 {
35         __u8 mode;
36         __u8 namelen;
37         __u16 unused;
38         __u32 flags;
39         __u32 lkid;
40         __u32 parent;
41         __u64 xid;
42         __u64 timeout;
43         __u32 castparam;
44         __u32 castaddr;
45         __u32 bastparam;
46         __u32 bastaddr;
47         __u32 lksb;
48         char lvb[DLM_USER_LVB_LEN];
49         char name[0];
50 };
51
52 struct dlm_write_request32 {
53         __u32 version[3];
54         __u8 cmd;
55         __u8 is64bit;
56         __u8 unused[2];
57
58         union  {
59                 struct dlm_lock_params32 lock;
60                 struct dlm_lspace_params lspace;
61                 struct dlm_purge_params purge;
62         } i;
63 };
64
65 struct dlm_lksb32 {
66         __u32 sb_status;
67         __u32 sb_lkid;
68         __u8 sb_flags;
69         __u32 sb_lvbptr;
70 };
71
72 struct dlm_lock_result32 {
73         __u32 version[3];
74         __u32 length;
75         __u32 user_astaddr;
76         __u32 user_astparam;
77         __u32 user_lksb;
78         struct dlm_lksb32 lksb;
79         __u8 bast_mode;
80         __u8 unused[3];
81         /* Offsets may be zero if no data is present */
82         __u32 lvb_offset;
83 };
84
85 static void compat_input(struct dlm_write_request *kb,
86                          struct dlm_write_request32 *kb32,
87                          size_t count)
88 {
89         kb->version[0] = kb32->version[0];
90         kb->version[1] = kb32->version[1];
91         kb->version[2] = kb32->version[2];
92
93         kb->cmd = kb32->cmd;
94         kb->is64bit = kb32->is64bit;
95         if (kb->cmd == DLM_USER_CREATE_LOCKSPACE ||
96             kb->cmd == DLM_USER_REMOVE_LOCKSPACE) {
97                 kb->i.lspace.flags = kb32->i.lspace.flags;
98                 kb->i.lspace.minor = kb32->i.lspace.minor;
99                 memcpy(kb->i.lspace.name, kb32->i.lspace.name, count -
100                         offsetof(struct dlm_write_request32, i.lspace.name));
101         } else if (kb->cmd == DLM_USER_PURGE) {
102                 kb->i.purge.nodeid = kb32->i.purge.nodeid;
103                 kb->i.purge.pid = kb32->i.purge.pid;
104         } else {
105                 kb->i.lock.mode = kb32->i.lock.mode;
106                 kb->i.lock.namelen = kb32->i.lock.namelen;
107                 kb->i.lock.flags = kb32->i.lock.flags;
108                 kb->i.lock.lkid = kb32->i.lock.lkid;
109                 kb->i.lock.parent = kb32->i.lock.parent;
110                 kb->i.lock.xid = kb32->i.lock.xid;
111                 kb->i.lock.timeout = kb32->i.lock.timeout;
112                 kb->i.lock.castparam = (void *)(long)kb32->i.lock.castparam;
113                 kb->i.lock.castaddr = (void *)(long)kb32->i.lock.castaddr;
114                 kb->i.lock.bastparam = (void *)(long)kb32->i.lock.bastparam;
115                 kb->i.lock.bastaddr = (void *)(long)kb32->i.lock.bastaddr;
116                 kb->i.lock.lksb = (void *)(long)kb32->i.lock.lksb;
117                 memcpy(kb->i.lock.lvb, kb32->i.lock.lvb, DLM_USER_LVB_LEN);
118                 memcpy(kb->i.lock.name, kb32->i.lock.name, count -
119                         offsetof(struct dlm_write_request32, i.lock.name));
120         }
121 }
122
123 static void compat_output(struct dlm_lock_result *res,
124                           struct dlm_lock_result32 *res32)
125 {
126         res32->version[0] = res->version[0];
127         res32->version[1] = res->version[1];
128         res32->version[2] = res->version[2];
129
130         res32->user_astaddr = (__u32)(long)res->user_astaddr;
131         res32->user_astparam = (__u32)(long)res->user_astparam;
132         res32->user_lksb = (__u32)(long)res->user_lksb;
133         res32->bast_mode = res->bast_mode;
134
135         res32->lvb_offset = res->lvb_offset;
136         res32->length = res->length;
137
138         res32->lksb.sb_status = res->lksb.sb_status;
139         res32->lksb.sb_flags = res->lksb.sb_flags;
140         res32->lksb.sb_lkid = res->lksb.sb_lkid;
141         res32->lksb.sb_lvbptr = (__u32)(long)res->lksb.sb_lvbptr;
142 }
143 #endif
144
145 /* Figure out if this lock is at the end of its life and no longer
146    available for the application to use.  The lkb still exists until
147    the final ast is read.  A lock becomes EOL in three situations:
148      1. a noqueue request fails with EAGAIN
149      2. an unlock completes with EUNLOCK
150      3. a cancel of a waiting request completes with ECANCEL/EDEADLK
151    An EOL lock needs to be removed from the process's list of locks.
152    And we can't allow any new operation on an EOL lock.  This is
153    not related to the lifetime of the lkb struct which is managed
154    entirely by refcount. */
155
156 static int lkb_is_endoflife(struct dlm_lkb *lkb, int sb_status, int type)
157 {
158         switch (sb_status) {
159         case -DLM_EUNLOCK:
160                 return 1;
161         case -DLM_ECANCEL:
162         case -ETIMEDOUT:
163         case -EDEADLK:
164                 if (lkb->lkb_grmode == DLM_LOCK_IV)
165                         return 1;
166                 break;
167         case -EAGAIN:
168                 if (type == AST_COMP && lkb->lkb_grmode == DLM_LOCK_IV)
169                         return 1;
170                 break;
171         }
172         return 0;
173 }
174
175 /* we could possibly check if the cancel of an orphan has resulted in the lkb
176    being removed and then remove that lkb from the orphans list and free it */
177
178 void dlm_user_add_ast(struct dlm_lkb *lkb, int type)
179 {
180         struct dlm_ls *ls;
181         struct dlm_user_args *ua;
182         struct dlm_user_proc *proc;
183         int eol = 0, ast_type;
184
185         if (lkb->lkb_flags & (DLM_IFL_ORPHAN | DLM_IFL_DEAD))
186                 return;
187
188         ls = lkb->lkb_resource->res_ls;
189         mutex_lock(&ls->ls_clear_proc_locks);
190
191         /* If ORPHAN/DEAD flag is set, it means the process is dead so an ast
192            can't be delivered.  For ORPHAN's, dlm_clear_proc_locks() freed
193            lkb->ua so we can't try to use it.  This second check is necessary
194            for cases where a completion ast is received for an operation that
195            began before clear_proc_locks did its cancel/unlock. */
196
197         if (lkb->lkb_flags & (DLM_IFL_ORPHAN | DLM_IFL_DEAD))
198                 goto out;
199
200         DLM_ASSERT(lkb->lkb_ua, dlm_print_lkb(lkb););
201         ua = lkb->lkb_ua;
202         proc = ua->proc;
203
204         if (type == AST_BAST && ua->bastaddr == NULL)
205                 goto out;
206
207         spin_lock(&proc->asts_spin);
208
209         ast_type = lkb->lkb_ast_type;
210         lkb->lkb_ast_type |= type;
211
212         if (!ast_type) {
213                 kref_get(&lkb->lkb_ref);
214                 list_add_tail(&lkb->lkb_astqueue, &proc->asts);
215                 wake_up_interruptible(&proc->wait);
216         }
217         if (type == AST_COMP && (ast_type & AST_COMP))
218                 log_debug(ls, "ast overlap %x status %x %x",
219                           lkb->lkb_id, ua->lksb.sb_status, lkb->lkb_flags);
220
221         eol = lkb_is_endoflife(lkb, ua->lksb.sb_status, type);
222         if (eol) {
223                 lkb->lkb_ast_type &= ~AST_BAST;
224                 lkb->lkb_flags |= DLM_IFL_ENDOFLIFE;
225         }
226
227         /* We want to copy the lvb to userspace when the completion
228            ast is read if the status is 0, the lock has an lvb and
229            lvb_ops says we should.  We could probably have set_lvb_lock()
230            set update_user_lvb instead and not need old_mode */
231
232         if ((lkb->lkb_ast_type & AST_COMP) &&
233             (lkb->lkb_lksb->sb_status == 0) &&
234             lkb->lkb_lksb->sb_lvbptr &&
235             dlm_lvb_operations[ua->old_mode + 1][lkb->lkb_grmode + 1])
236                 ua->update_user_lvb = 1;
237         else
238                 ua->update_user_lvb = 0;
239
240         spin_unlock(&proc->asts_spin);
241
242         if (eol) {
243                 spin_lock(&proc->locks_spin);
244                 if (!list_empty(&lkb->lkb_ownqueue)) {
245                         list_del_init(&lkb->lkb_ownqueue);
246                         dlm_put_lkb(lkb);
247                 }
248                 spin_unlock(&proc->locks_spin);
249         }
250  out:
251         mutex_unlock(&ls->ls_clear_proc_locks);
252 }
253
254 static int device_user_lock(struct dlm_user_proc *proc,
255                             struct dlm_lock_params *params)
256 {
257         struct dlm_ls *ls;
258         struct dlm_user_args *ua;
259         int error = -ENOMEM;
260
261         ls = dlm_find_lockspace_local(proc->lockspace);
262         if (!ls)
263                 return -ENOENT;
264
265         if (!params->castaddr || !params->lksb) {
266                 error = -EINVAL;
267                 goto out;
268         }
269
270         ua = kzalloc(sizeof(struct dlm_user_args), GFP_KERNEL);
271         if (!ua)
272                 goto out;
273         ua->proc = proc;
274         ua->user_lksb = params->lksb;
275         ua->castparam = params->castparam;
276         ua->castaddr = params->castaddr;
277         ua->bastparam = params->bastparam;
278         ua->bastaddr = params->bastaddr;
279         ua->xid = params->xid;
280
281         if (params->flags & DLM_LKF_CONVERT)
282                 error = dlm_user_convert(ls, ua,
283                                          params->mode, params->flags,
284                                          params->lkid, params->lvb,
285                                          (unsigned long) params->timeout);
286         else {
287                 error = dlm_user_request(ls, ua,
288                                          params->mode, params->flags,
289                                          params->name, params->namelen,
290                                          (unsigned long) params->timeout);
291                 if (!error)
292                         error = ua->lksb.sb_lkid;
293         }
294  out:
295         dlm_put_lockspace(ls);
296         return error;
297 }
298
299 static int device_user_unlock(struct dlm_user_proc *proc,
300                               struct dlm_lock_params *params)
301 {
302         struct dlm_ls *ls;
303         struct dlm_user_args *ua;
304         int error = -ENOMEM;
305
306         ls = dlm_find_lockspace_local(proc->lockspace);
307         if (!ls)
308                 return -ENOENT;
309
310         ua = kzalloc(sizeof(struct dlm_user_args), GFP_KERNEL);
311         if (!ua)
312                 goto out;
313         ua->proc = proc;
314         ua->user_lksb = params->lksb;
315         ua->castparam = params->castparam;
316         ua->castaddr = params->castaddr;
317
318         if (params->flags & DLM_LKF_CANCEL)
319                 error = dlm_user_cancel(ls, ua, params->flags, params->lkid);
320         else
321                 error = dlm_user_unlock(ls, ua, params->flags, params->lkid,
322                                         params->lvb);
323  out:
324         dlm_put_lockspace(ls);
325         return error;
326 }
327
328 static int device_user_deadlock(struct dlm_user_proc *proc,
329                                 struct dlm_lock_params *params)
330 {
331         struct dlm_ls *ls;
332         int error;
333
334         ls = dlm_find_lockspace_local(proc->lockspace);
335         if (!ls)
336                 return -ENOENT;
337
338         error = dlm_user_deadlock(ls, params->flags, params->lkid);
339
340         dlm_put_lockspace(ls);
341         return error;
342 }
343
344 static int dlm_device_register(struct dlm_ls *ls, char *name)
345 {
346         int error, len;
347
348         /* The device is already registered.  This happens when the
349            lockspace is created multiple times from userspace. */
350         if (ls->ls_device.name)
351                 return 0;
352
353         error = -ENOMEM;
354         len = strlen(name) + strlen(name_prefix) + 2;
355         ls->ls_device.name = kzalloc(len, GFP_KERNEL);
356         if (!ls->ls_device.name)
357                 goto fail;
358
359         snprintf((char *)ls->ls_device.name, len, "%s_%s", name_prefix,
360                  name);
361         ls->ls_device.fops = &device_fops;
362         ls->ls_device.minor = MISC_DYNAMIC_MINOR;
363
364         error = misc_register(&ls->ls_device);
365         if (error) {
366                 kfree(ls->ls_device.name);
367         }
368 fail:
369         return error;
370 }
371
372 int dlm_device_deregister(struct dlm_ls *ls)
373 {
374         int error;
375
376         /* The device is not registered.  This happens when the lockspace
377            was never used from userspace, or when device_create_lockspace()
378            calls dlm_release_lockspace() after the register fails. */
379         if (!ls->ls_device.name)
380                 return 0;
381
382         error = misc_deregister(&ls->ls_device);
383         if (!error)
384                 kfree(ls->ls_device.name);
385         return error;
386 }
387
388 static int device_user_purge(struct dlm_user_proc *proc,
389                              struct dlm_purge_params *params)
390 {
391         struct dlm_ls *ls;
392         int error;
393
394         ls = dlm_find_lockspace_local(proc->lockspace);
395         if (!ls)
396                 return -ENOENT;
397
398         error = dlm_user_purge(ls, proc, params->nodeid, params->pid);
399
400         dlm_put_lockspace(ls);
401         return error;
402 }
403
404 static int device_create_lockspace(struct dlm_lspace_params *params)
405 {
406         dlm_lockspace_t *lockspace;
407         struct dlm_ls *ls;
408         int error;
409
410         if (!capable(CAP_SYS_ADMIN))
411                 return -EPERM;
412
413         error = dlm_new_lockspace(params->name, strlen(params->name),
414                                   &lockspace, params->flags, DLM_USER_LVB_LEN);
415         if (error)
416                 return error;
417
418         ls = dlm_find_lockspace_local(lockspace);
419         if (!ls)
420                 return -ENOENT;
421
422         error = dlm_device_register(ls, params->name);
423         dlm_put_lockspace(ls);
424
425         if (error)
426                 dlm_release_lockspace(lockspace, 0);
427         else
428                 error = ls->ls_device.minor;
429
430         return error;
431 }
432
433 static int device_remove_lockspace(struct dlm_lspace_params *params)
434 {
435         dlm_lockspace_t *lockspace;
436         struct dlm_ls *ls;
437         int error, force = 0;
438
439         if (!capable(CAP_SYS_ADMIN))
440                 return -EPERM;
441
442         ls = dlm_find_lockspace_device(params->minor);
443         if (!ls)
444                 return -ENOENT;
445
446         if (params->flags & DLM_USER_LSFLG_FORCEFREE)
447                 force = 2;
448
449         lockspace = ls->ls_local_handle;
450         dlm_put_lockspace(ls);
451
452         /* The final dlm_release_lockspace waits for references to go to
453            zero, so all processes will need to close their device for the
454            ls before the release will proceed.  release also calls the
455            device_deregister above.  Converting a positive return value
456            from release to zero means that userspace won't know when its
457            release was the final one, but it shouldn't need to know. */
458
459         error = dlm_release_lockspace(lockspace, force);
460         if (error > 0)
461                 error = 0;
462         return error;
463 }
464
465 /* Check the user's version matches ours */
466 static int check_version(struct dlm_write_request *req)
467 {
468         if (req->version[0] != DLM_DEVICE_VERSION_MAJOR ||
469             (req->version[0] == DLM_DEVICE_VERSION_MAJOR &&
470              req->version[1] > DLM_DEVICE_VERSION_MINOR)) {
471
472                 printk(KERN_DEBUG "dlm: process %s (%d) version mismatch "
473                        "user (%d.%d.%d) kernel (%d.%d.%d)\n",
474                        current->comm,
475                        task_pid_nr(current),
476                        req->version[0],
477                        req->version[1],
478                        req->version[2],
479                        DLM_DEVICE_VERSION_MAJOR,
480                        DLM_DEVICE_VERSION_MINOR,
481                        DLM_DEVICE_VERSION_PATCH);
482                 return -EINVAL;
483         }
484         return 0;
485 }
486
487 /*
488  * device_write
489  *
490  *   device_user_lock
491  *     dlm_user_request -> request_lock
492  *     dlm_user_convert -> convert_lock
493  *
494  *   device_user_unlock
495  *     dlm_user_unlock -> unlock_lock
496  *     dlm_user_cancel -> cancel_lock
497  *
498  *   device_create_lockspace
499  *     dlm_new_lockspace
500  *
501  *   device_remove_lockspace
502  *     dlm_release_lockspace
503  */
504
505 /* a write to a lockspace device is a lock or unlock request, a write
506    to the control device is to create/remove a lockspace */
507
508 static ssize_t device_write(struct file *file, const char __user *buf,
509                             size_t count, loff_t *ppos)
510 {
511         struct dlm_user_proc *proc = file->private_data;
512         struct dlm_write_request *kbuf;
513         sigset_t tmpsig, allsigs;
514         int error;
515
516 #ifdef CONFIG_COMPAT
517         if (count < sizeof(struct dlm_write_request32))
518 #else
519         if (count < sizeof(struct dlm_write_request))
520 #endif
521                 return -EINVAL;
522
523         kbuf = kzalloc(count + 1, GFP_KERNEL);
524         if (!kbuf)
525                 return -ENOMEM;
526
527         if (copy_from_user(kbuf, buf, count)) {
528                 error = -EFAULT;
529                 goto out_free;
530         }
531
532         if (check_version(kbuf)) {
533                 error = -EBADE;
534                 goto out_free;
535         }
536
537 #ifdef CONFIG_COMPAT
538         if (!kbuf->is64bit) {
539                 struct dlm_write_request32 *k32buf;
540                 k32buf = (struct dlm_write_request32 *)kbuf;
541                 kbuf = kmalloc(count + 1 + (sizeof(struct dlm_write_request) -
542                                sizeof(struct dlm_write_request32)), GFP_KERNEL);
543                 if (!kbuf) {
544                         kfree(k32buf);
545                         return -ENOMEM;
546                 }
547
548                 if (proc)
549                         set_bit(DLM_PROC_FLAGS_COMPAT, &proc->flags);
550                 compat_input(kbuf, k32buf, count + 1);
551                 kfree(k32buf);
552         }
553 #endif
554
555         /* do we really need this? can a write happen after a close? */
556         if ((kbuf->cmd == DLM_USER_LOCK || kbuf->cmd == DLM_USER_UNLOCK) &&
557             (proc && test_bit(DLM_PROC_FLAGS_CLOSING, &proc->flags))) {
558                 error = -EINVAL;
559                 goto out_free;
560         }
561
562         sigfillset(&allsigs);
563         sigprocmask(SIG_BLOCK, &allsigs, &tmpsig);
564
565         error = -EINVAL;
566
567         switch (kbuf->cmd)
568         {
569         case DLM_USER_LOCK:
570                 if (!proc) {
571                         log_print("no locking on control device");
572                         goto out_sig;
573                 }
574                 error = device_user_lock(proc, &kbuf->i.lock);
575                 break;
576
577         case DLM_USER_UNLOCK:
578                 if (!proc) {
579                         log_print("no locking on control device");
580                         goto out_sig;
581                 }
582                 error = device_user_unlock(proc, &kbuf->i.lock);
583                 break;
584
585         case DLM_USER_DEADLOCK:
586                 if (!proc) {
587                         log_print("no locking on control device");
588                         goto out_sig;
589                 }
590                 error = device_user_deadlock(proc, &kbuf->i.lock);
591                 break;
592
593         case DLM_USER_CREATE_LOCKSPACE:
594                 if (proc) {
595                         log_print("create/remove only on control device");
596                         goto out_sig;
597                 }
598                 error = device_create_lockspace(&kbuf->i.lspace);
599                 break;
600
601         case DLM_USER_REMOVE_LOCKSPACE:
602                 if (proc) {
603                         log_print("create/remove only on control device");
604                         goto out_sig;
605                 }
606                 error = device_remove_lockspace(&kbuf->i.lspace);
607                 break;
608
609         case DLM_USER_PURGE:
610                 if (!proc) {
611                         log_print("no locking on control device");
612                         goto out_sig;
613                 }
614                 error = device_user_purge(proc, &kbuf->i.purge);
615                 break;
616
617         default:
618                 log_print("Unknown command passed to DLM device : %d\n",
619                           kbuf->cmd);
620         }
621
622  out_sig:
623         sigprocmask(SIG_SETMASK, &tmpsig, NULL);
624         recalc_sigpending();
625  out_free:
626         kfree(kbuf);
627         return error;
628 }
629
630 /* Every process that opens the lockspace device has its own "proc" structure
631    hanging off the open file that's used to keep track of locks owned by the
632    process and asts that need to be delivered to the process. */
633
634 static int device_open(struct inode *inode, struct file *file)
635 {
636         struct dlm_user_proc *proc;
637         struct dlm_ls *ls;
638
639         ls = dlm_find_lockspace_device(iminor(inode));
640         if (!ls)
641                 return -ENOENT;
642
643         proc = kzalloc(sizeof(struct dlm_user_proc), GFP_KERNEL);
644         if (!proc) {
645                 dlm_put_lockspace(ls);
646                 return -ENOMEM;
647         }
648
649         proc->lockspace = ls->ls_local_handle;
650         INIT_LIST_HEAD(&proc->asts);
651         INIT_LIST_HEAD(&proc->locks);
652         INIT_LIST_HEAD(&proc->unlocking);
653         spin_lock_init(&proc->asts_spin);
654         spin_lock_init(&proc->locks_spin);
655         init_waitqueue_head(&proc->wait);
656         file->private_data = proc;
657
658         return 0;
659 }
660
661 static int device_close(struct inode *inode, struct file *file)
662 {
663         struct dlm_user_proc *proc = file->private_data;
664         struct dlm_ls *ls;
665         sigset_t tmpsig, allsigs;
666
667         ls = dlm_find_lockspace_local(proc->lockspace);
668         if (!ls)
669                 return -ENOENT;
670
671         sigfillset(&allsigs);
672         sigprocmask(SIG_BLOCK, &allsigs, &tmpsig);
673
674         set_bit(DLM_PROC_FLAGS_CLOSING, &proc->flags);
675
676         dlm_clear_proc_locks(ls, proc);
677
678         /* at this point no more lkb's should exist for this lockspace,
679            so there's no chance of dlm_user_add_ast() being called and
680            looking for lkb->ua->proc */
681
682         kfree(proc);
683         file->private_data = NULL;
684
685         dlm_put_lockspace(ls);
686         dlm_put_lockspace(ls);  /* for the find in device_open() */
687
688         /* FIXME: AUTOFREE: if this ls is no longer used do
689            device_remove_lockspace() */
690
691         sigprocmask(SIG_SETMASK, &tmpsig, NULL);
692         recalc_sigpending();
693
694         return 0;
695 }
696
697 static int copy_result_to_user(struct dlm_user_args *ua, int compat, int type,
698                                int bmode, char __user *buf, size_t count)
699 {
700 #ifdef CONFIG_COMPAT
701         struct dlm_lock_result32 result32;
702 #endif
703         struct dlm_lock_result result;
704         void *resultptr;
705         int error=0;
706         int len;
707         int struct_len;
708
709         memset(&result, 0, sizeof(struct dlm_lock_result));
710         result.version[0] = DLM_DEVICE_VERSION_MAJOR;
711         result.version[1] = DLM_DEVICE_VERSION_MINOR;
712         result.version[2] = DLM_DEVICE_VERSION_PATCH;
713         memcpy(&result.lksb, &ua->lksb, sizeof(struct dlm_lksb));
714         result.user_lksb = ua->user_lksb;
715
716         /* FIXME: dlm1 provides for the user's bastparam/addr to not be updated
717            in a conversion unless the conversion is successful.  See code
718            in dlm_user_convert() for updating ua from ua_tmp.  OpenVMS, though,
719            notes that a new blocking AST address and parameter are set even if
720            the conversion fails, so maybe we should just do that. */
721
722         if (type == AST_BAST) {
723                 result.user_astaddr = ua->bastaddr;
724                 result.user_astparam = ua->bastparam;
725                 result.bast_mode = bmode;
726         } else {
727                 result.user_astaddr = ua->castaddr;
728                 result.user_astparam = ua->castparam;
729         }
730
731 #ifdef CONFIG_COMPAT
732         if (compat)
733                 len = sizeof(struct dlm_lock_result32);
734         else
735 #endif
736                 len = sizeof(struct dlm_lock_result);
737         struct_len = len;
738
739         /* copy lvb to userspace if there is one, it's been updated, and
740            the user buffer has space for it */
741
742         if (ua->update_user_lvb && ua->lksb.sb_lvbptr &&
743             count >= len + DLM_USER_LVB_LEN) {
744                 if (copy_to_user(buf+len, ua->lksb.sb_lvbptr,
745                                  DLM_USER_LVB_LEN)) {
746                         error = -EFAULT;
747                         goto out;
748                 }
749
750                 result.lvb_offset = len;
751                 len += DLM_USER_LVB_LEN;
752         }
753
754         result.length = len;
755         resultptr = &result;
756 #ifdef CONFIG_COMPAT
757         if (compat) {
758                 compat_output(&result, &result32);
759                 resultptr = &result32;
760         }
761 #endif
762
763         if (copy_to_user(buf, resultptr, struct_len))
764                 error = -EFAULT;
765         else
766                 error = len;
767  out:
768         return error;
769 }
770
771 static int copy_version_to_user(char __user *buf, size_t count)
772 {
773         struct dlm_device_version ver;
774
775         memset(&ver, 0, sizeof(struct dlm_device_version));
776         ver.version[0] = DLM_DEVICE_VERSION_MAJOR;
777         ver.version[1] = DLM_DEVICE_VERSION_MINOR;
778         ver.version[2] = DLM_DEVICE_VERSION_PATCH;
779
780         if (copy_to_user(buf, &ver, sizeof(struct dlm_device_version)))
781                 return -EFAULT;
782         return sizeof(struct dlm_device_version);
783 }
784
785 /* a read returns a single ast described in a struct dlm_lock_result */
786
787 static ssize_t device_read(struct file *file, char __user *buf, size_t count,
788                            loff_t *ppos)
789 {
790         struct dlm_user_proc *proc = file->private_data;
791         struct dlm_lkb *lkb;
792         DECLARE_WAITQUEUE(wait, current);
793         int error, type=0, bmode=0, removed = 0;
794
795         if (count == sizeof(struct dlm_device_version)) {
796                 error = copy_version_to_user(buf, count);
797                 return error;
798         }
799
800         if (!proc) {
801                 log_print("non-version read from control device %zu", count);
802                 return -EINVAL;
803         }
804
805 #ifdef CONFIG_COMPAT
806         if (count < sizeof(struct dlm_lock_result32))
807 #else
808         if (count < sizeof(struct dlm_lock_result))
809 #endif
810                 return -EINVAL;
811
812         /* do we really need this? can a read happen after a close? */
813         if (test_bit(DLM_PROC_FLAGS_CLOSING, &proc->flags))
814                 return -EINVAL;
815
816         spin_lock(&proc->asts_spin);
817         if (list_empty(&proc->asts)) {
818                 if (file->f_flags & O_NONBLOCK) {
819                         spin_unlock(&proc->asts_spin);
820                         return -EAGAIN;
821                 }
822
823                 add_wait_queue(&proc->wait, &wait);
824
825         repeat:
826                 set_current_state(TASK_INTERRUPTIBLE);
827                 if (list_empty(&proc->asts) && !signal_pending(current)) {
828                         spin_unlock(&proc->asts_spin);
829                         schedule();
830                         spin_lock(&proc->asts_spin);
831                         goto repeat;
832                 }
833                 set_current_state(TASK_RUNNING);
834                 remove_wait_queue(&proc->wait, &wait);
835
836                 if (signal_pending(current)) {
837                         spin_unlock(&proc->asts_spin);
838                         return -ERESTARTSYS;
839                 }
840         }
841
842         /* there may be both completion and blocking asts to return for
843            the lkb, don't remove lkb from asts list unless no asts remain */
844
845         lkb = list_entry(proc->asts.next, struct dlm_lkb, lkb_astqueue);
846
847         if (lkb->lkb_ast_type & AST_COMP) {
848                 lkb->lkb_ast_type &= ~AST_COMP;
849                 type = AST_COMP;
850         } else if (lkb->lkb_ast_type & AST_BAST) {
851                 lkb->lkb_ast_type &= ~AST_BAST;
852                 type = AST_BAST;
853                 bmode = lkb->lkb_bastmode;
854         }
855
856         if (!lkb->lkb_ast_type) {
857                 list_del(&lkb->lkb_astqueue);
858                 removed = 1;
859         }
860         spin_unlock(&proc->asts_spin);
861
862         error = copy_result_to_user(lkb->lkb_ua,
863                                 test_bit(DLM_PROC_FLAGS_COMPAT, &proc->flags),
864                                 type, bmode, buf, count);
865
866         /* removes reference for the proc->asts lists added by
867            dlm_user_add_ast() and may result in the lkb being freed */
868         if (removed)
869                 dlm_put_lkb(lkb);
870
871         return error;
872 }
873
874 static unsigned int device_poll(struct file *file, poll_table *wait)
875 {
876         struct dlm_user_proc *proc = file->private_data;
877
878         poll_wait(file, &proc->wait, wait);
879
880         spin_lock(&proc->asts_spin);
881         if (!list_empty(&proc->asts)) {
882                 spin_unlock(&proc->asts_spin);
883                 return POLLIN | POLLRDNORM;
884         }
885         spin_unlock(&proc->asts_spin);
886         return 0;
887 }
888
889 int dlm_user_daemon_available(void)
890 {
891         /* dlm_controld hasn't started (or, has started, but not
892            properly populated configfs) */
893
894         if (!dlm_our_nodeid())
895                 return 0;
896
897         /* This is to deal with versions of dlm_controld that don't
898            know about the monitor device.  We assume that if the
899            dlm_controld was started (above), but the monitor device
900            was never opened, that it's an old version.  dlm_controld
901            should open the monitor device before populating configfs. */
902
903         if (dlm_monitor_unused)
904                 return 1;
905
906         return atomic_read(&dlm_monitor_opened) ? 1 : 0;
907 }
908
909 static int ctl_device_open(struct inode *inode, struct file *file)
910 {
911         file->private_data = NULL;
912         return 0;
913 }
914
915 static int ctl_device_close(struct inode *inode, struct file *file)
916 {
917         return 0;
918 }
919
920 static int monitor_device_open(struct inode *inode, struct file *file)
921 {
922         atomic_inc(&dlm_monitor_opened);
923         dlm_monitor_unused = 0;
924         return 0;
925 }
926
927 static int monitor_device_close(struct inode *inode, struct file *file)
928 {
929         if (atomic_dec_and_test(&dlm_monitor_opened))
930                 dlm_stop_lockspaces();
931         return 0;
932 }
933
934 static const struct file_operations device_fops = {
935         .open    = device_open,
936         .release = device_close,
937         .read    = device_read,
938         .write   = device_write,
939         .poll    = device_poll,
940         .owner   = THIS_MODULE,
941 };
942
943 static const struct file_operations ctl_device_fops = {
944         .open    = ctl_device_open,
945         .release = ctl_device_close,
946         .read    = device_read,
947         .write   = device_write,
948         .owner   = THIS_MODULE,
949 };
950
951 static struct miscdevice ctl_device = {
952         .name  = "dlm-control",
953         .fops  = &ctl_device_fops,
954         .minor = MISC_DYNAMIC_MINOR,
955 };
956
957 static const struct file_operations monitor_device_fops = {
958         .open    = monitor_device_open,
959         .release = monitor_device_close,
960         .owner   = THIS_MODULE,
961 };
962
963 static struct miscdevice monitor_device = {
964         .name  = "dlm-monitor",
965         .fops  = &monitor_device_fops,
966         .minor = MISC_DYNAMIC_MINOR,
967 };
968
969 int __init dlm_user_init(void)
970 {
971         int error;
972
973         atomic_set(&dlm_monitor_opened, 0);
974
975         error = misc_register(&ctl_device);
976         if (error) {
977                 log_print("misc_register failed for control device");
978                 goto out;
979         }
980
981         error = misc_register(&monitor_device);
982         if (error) {
983                 log_print("misc_register failed for monitor device");
984                 misc_deregister(&ctl_device);
985         }
986  out:
987         return error;
988 }
989
990 void dlm_user_exit(void)
991 {
992         misc_deregister(&ctl_device);
993         misc_deregister(&monitor_device);
994 }
995