SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/video/atmel_lcdfb.c

   1 /*
   2  *  Driver for AT91/AT32 LCD Controller
   3  *
   4  *  Copyright (C) 2007 Atmel Corporation
   5  *
   6  * This file is subject to the terms and conditions of the GNU General Public
   7  * License.  See the file COPYING in the main directory of this archive for
   8  * more details.
   9  */
  10
  11 #include <linux/kernel.h>
  12 #include <linux/platform_device.h>
  13 #include <linux/dma-mapping.h>
  14 #include <linux/interrupt.h>
  15 #include <linux/clk.h>
  16 #include <linux/fb.h>
  17 #include <linux/init.h>
  18 #include <linux/delay.h>
  19 #include <linux/backlight.h>
  20
  21 #include <asm/arch/board.h>
  22 #include <asm/arch/cpu.h>
  23 #include <asm/arch/gpio.h>
  24
  25 #include <video/atmel_lcdc.h>
  26
  27 #define lcdc_readl(sinfo, reg)          __raw_readl((sinfo)->mmio+(reg))
  28 #define lcdc_writel(sinfo, reg, val)    __raw_writel((val), (sinfo)->mmio+(reg))
  29
  30 /* configurable parameters */
  31 #define ATMEL_LCDC_CVAL_DEFAULT         0xc8
  32 #define ATMEL_LCDC_DMA_BURST_LEN        8
  33
  34 #if defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9) || \
  35         defined(CONFIG_ARCH_AT91SAM9RL)
  36 #define ATMEL_LCDC_FIFO_SIZE            2048
  37 #else
  38 #define ATMEL_LCDC_FIFO_SIZE            512
  39 #endif
  40
  41 #if defined(CONFIG_ARCH_AT91)
  42 #define ATMEL_LCDFB_FBINFO_DEFAULT      FBINFO_DEFAULT
  43
  44 static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
  45                                         struct fb_var_screeninfo *var)
  46 {
  47
  48 }
  49 #elif defined(CONFIG_AVR32)
  50 #define ATMEL_LCDFB_FBINFO_DEFAULT      (FBINFO_DEFAULT \
  51                                         | FBINFO_PARTIAL_PAN_OK \
  52                                         | FBINFO_HWACCEL_XPAN \
  53                                         | FBINFO_HWACCEL_YPAN)
  54
  55 static void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
  56                                      struct fb_var_screeninfo *var)
  57 {
  58         u32 dma2dcfg;
  59         u32 pixeloff;
  60
  61         pixeloff = (var->xoffset * var->bits_per_pixel) & 0x1f;
  62
  63         dma2dcfg = ((var->xres_virtual - var->xres) * var->bits_per_pixel) / 8;
  64         dma2dcfg |= pixeloff << ATMEL_LCDC_PIXELOFF_OFFSET;
  65         lcdc_writel(sinfo, ATMEL_LCDC_DMA2DCFG, dma2dcfg);
  66
  67         /* Update configuration */
  68         lcdc_writel(sinfo, ATMEL_LCDC_DMACON,
  69                     lcdc_readl(sinfo, ATMEL_LCDC_DMACON)
  70                     | ATMEL_LCDC_DMAUPDT);
  71 }
  72 #endif
  73
  74 static const u32 contrast_ctr = ATMEL_LCDC_PS_DIV8
  75                 | ATMEL_LCDC_POL_POSITIVE
  76                 | ATMEL_LCDC_ENA_PWMENABLE;
  77
  78 #ifdef CONFIG_BACKLIGHT_ATMEL_LCDC
  79
  80 /* some bl->props field just changed */
  81 static int atmel_bl_update_status(struct backlight_device *bl)
  82 {
  83         struct atmel_lcdfb_info *sinfo = bl_get_data(bl);
  84         int                     power = sinfo->bl_power;
  85         int                     brightness = bl->props.brightness;
  86
  87         /* REVISIT there may be a meaningful difference between
  88          * fb_blank and power ... there seem to be some cases
  89          * this doesn't handle correctly.
  90          */
  91         if (bl->props.fb_blank != sinfo->bl_power)
  92                 power = bl->props.fb_blank;
  93         else if (bl->props.power != sinfo->bl_power)
  94                 power = bl->props.power;
  95
  96         if (brightness < 0 && power == FB_BLANK_UNBLANK)
  97                 brightness = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
  98         else if (power != FB_BLANK_UNBLANK)
  99                 brightness = 0;
 100
 101         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, brightness);
 102         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR,
 103                         brightness ? contrast_ctr : 0);
 104
 105         bl->props.fb_blank = bl->props.power = sinfo->bl_power = power;
 106
 107         return 0;
 108 }
 109
 110 static int atmel_bl_get_brightness(struct backlight_device *bl)
 111 {
 112         struct atmel_lcdfb_info *sinfo = bl_get_data(bl);
 113
 114         return lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
 115 }
 116
 117 static struct backlight_ops atmel_lcdc_bl_ops = {
 118         .update_status = atmel_bl_update_status,
 119         .get_brightness = atmel_bl_get_brightness,
 120 };
 121
 122 static void init_backlight(struct atmel_lcdfb_info *sinfo)
 123 {
 124         struct backlight_device *bl;
 125
 126         sinfo->bl_power = FB_BLANK_UNBLANK;
 127
 128         if (sinfo->backlight)
 129                 return;
 130
 131         bl = backlight_device_register("backlight", &sinfo->pdev->dev,
 132                         sinfo, &atmel_lcdc_bl_ops);
 133         if (IS_ERR(sinfo->backlight)) {
 134                 dev_err(&sinfo->pdev->dev, "error %ld on backlight register\n",
 135                                 PTR_ERR(bl));
 136                 return;
 137         }
 138         sinfo->backlight = bl;
 139
 140         bl->props.power = FB_BLANK_UNBLANK;
 141         bl->props.fb_blank = FB_BLANK_UNBLANK;
 142         bl->props.max_brightness = 0xff;
 143         bl->props.brightness = atmel_bl_get_brightness(bl);
 144 }
 145
 146 static void exit_backlight(struct atmel_lcdfb_info *sinfo)
 147 {
 148         if (sinfo->backlight)
 149                 backlight_device_unregister(sinfo->backlight);
 150 }
 151
 152 #else
 153
 154 static void init_backlight(struct atmel_lcdfb_info *sinfo)
 155 {
 156         dev_warn(&sinfo->pdev->dev, "backlight control is not available\n");
 157 }
 158
 159 static void exit_backlight(struct atmel_lcdfb_info *sinfo)
 160 {
 161 }
 162
 163 #endif
 164
 165 static void init_contrast(struct atmel_lcdfb_info *sinfo)
 166 {
 167         /* have some default contrast/backlight settings */
 168         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr);
 169         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
 170
 171         if (sinfo->lcdcon_is_backlight)
 172                 init_backlight(sinfo);
 173 }
 174
 175
 176 static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
 177         .type           = FB_TYPE_PACKED_PIXELS,
 178         .visual         = FB_VISUAL_TRUECOLOR,
 179         .xpanstep       = 0,
 180         .ypanstep       = 0,
 181         .ywrapstep      = 0,
 182         .accel          = FB_ACCEL_NONE,
 183 };
 184
 185 static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2)
 186 {
 187         unsigned long value;
 188
 189         if (!(cpu_is_at91sam9261() || cpu_is_at32ap7000()))
 190                 return xres;
 191
 192         value = xres;
 193         if ((lcdcon2 & ATMEL_LCDC_DISTYPE) != ATMEL_LCDC_DISTYPE_TFT) {
 194                 /* STN display */
 195                 if ((lcdcon2 & ATMEL_LCDC_DISTYPE) == ATMEL_LCDC_DISTYPE_STNCOLOR) {
 196                         value *= 3;
 197                 }
 198                 if ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_4
 199                    || ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_8
 200                       && (lcdcon2 & ATMEL_LCDC_SCANMOD) == ATMEL_LCDC_SCANMOD_DUAL ))
 201                         value = DIV_ROUND_UP(value, 4);
 202                 else
 203                         value = DIV_ROUND_UP(value, 8);
 204         }
 205
 206         return value;
 207 }
 208
 209 static void atmel_lcdfb_update_dma(struct fb_info *info,
 210                                struct fb_var_screeninfo *var)
 211 {
 212         struct atmel_lcdfb_info *sinfo = info->par;
 213         struct fb_fix_screeninfo *fix = &info->fix;
 214         unsigned long dma_addr;
 215
 216         dma_addr = (fix->smem_start + var->yoffset * fix->line_length
 217                     + var->xoffset * var->bits_per_pixel / 8);
 218
 219         dma_addr &= ~3UL;
 220
 221         /* Set framebuffer DMA base address and pixel offset */
 222         lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr);
 223
 224         atmel_lcdfb_update_dma2d(sinfo, var);
 225 }
 226
 227 static inline void atmel_lcdfb_free_video_memory(struct atmel_lcdfb_info *sinfo)
 228 {
 229         struct fb_info *info = sinfo->info;
 230
 231         dma_free_writecombine(info->device, info->fix.smem_len,
 232                                 info->screen_base, info->fix.smem_start);
 233 }
 234
 235 /**
 236  *      atmel_lcdfb_alloc_video_memory - Allocate framebuffer memory
 237  *      @sinfo: the frame buffer to allocate memory for
 238  */
 239 static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
 240 {
 241         struct fb_info *info = sinfo->info;
 242         struct fb_var_screeninfo *var = &info->var;
 243
 244         info->fix.smem_len = (var->xres_virtual * var->yres_virtual
 245                             * ((var->bits_per_pixel + 7) / 8));
 246
 247         info->screen_base = dma_alloc_writecombine(info->device, info->fix.smem_len,
 248                                         (dma_addr_t *)&info->fix.smem_start, GFP_KERNEL);
 249
 250         if (!info->screen_base) {
 251                 return -ENOMEM;
 252         }
 253
 254         memset(info->screen_base, 0, info->fix.smem_len);
 255
 256         return 0;
 257 }
 258
 259 /**
 260  *      atmel_lcdfb_check_var - Validates a var passed in.
 261  *      @var: frame buffer variable screen structure
 262  *      @info: frame buffer structure that represents a single frame buffer
 263  *
 264  *      Checks to see if the hardware supports the state requested by
 265  *      var passed in. This function does not alter the hardware
 266  *      state!!!  This means the data stored in struct fb_info and
 267  *      struct atmel_lcdfb_info do not change. This includes the var
 268  *      inside of struct fb_info.  Do NOT change these. This function
 269  *      can be called on its own if we intent to only test a mode and
 270  *      not actually set it. The stuff in modedb.c is a example of
 271  *      this. If the var passed in is slightly off by what the
 272  *      hardware can support then we alter the var PASSED in to what
 273  *      we can do. If the hardware doesn't support mode change a
 274  *      -EINVAL will be returned by the upper layers. You don't need
 275  *      to implement this function then. If you hardware doesn't
 276  *      support changing the resolution then this function is not
 277  *      needed. In this case the driver would just provide a var that
 278  *      represents the static state the screen is in.
 279  *
 280  *      Returns negative errno on error, or zero on success.
 281  */
 282 static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
 283                              struct fb_info *info)
 284 {
 285         struct device *dev = info->device;
 286         struct atmel_lcdfb_info *sinfo = info->par;
 287         unsigned long clk_value_khz;
 288
 289         clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
 290
 291         dev_dbg(dev, "%s:\n", __func__);
 292         dev_dbg(dev, "  resolution: %ux%u\n", var->xres, var->yres);
 293         dev_dbg(dev, "  pixclk:     %lu KHz\n", PICOS2KHZ(var->pixclock));
 294         dev_dbg(dev, "  bpp:        %u\n", var->bits_per_pixel);
 295         dev_dbg(dev, "  clk:        %lu KHz\n", clk_value_khz);
 296
 297         if ((PICOS2KHZ(var->pixclock) * var->bits_per_pixel / 8) > clk_value_khz) {
 298                 dev_err(dev, "%lu KHz pixel clock is too fast\n", PICOS2KHZ(var->pixclock));
 299                 return -EINVAL;
 300         }
 301
 302         /* Force same alignment for each line */
 303         var->xres = (var->xres + 3) & ~3UL;
 304         var->xres_virtual = (var->xres_virtual + 3) & ~3UL;
 305
 306         var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0;
 307         var->transp.msb_right = 0;
 308         var->transp.offset = var->transp.length = 0;
 309         var->xoffset = var->yoffset = 0;
 310
 311         /* Saturate vertical and horizontal timings at maximum values */
 312         var->vsync_len = min_t(u32, var->vsync_len,
 313                         (ATMEL_LCDC_VPW >> ATMEL_LCDC_VPW_OFFSET) + 1);
 314         var->upper_margin = min_t(u32, var->upper_margin,
 315                         ATMEL_LCDC_VBP >> ATMEL_LCDC_VBP_OFFSET);
 316         var->lower_margin = min_t(u32, var->lower_margin,
 317                         ATMEL_LCDC_VFP);
 318         var->right_margin = min_t(u32, var->right_margin,
 319                         (ATMEL_LCDC_HFP >> ATMEL_LCDC_HFP_OFFSET) + 1);
 320         var->hsync_len = min_t(u32, var->hsync_len,
 321                         (ATMEL_LCDC_HPW >> ATMEL_LCDC_HPW_OFFSET) + 1);
 322         var->left_margin = min_t(u32, var->left_margin,
 323                         ATMEL_LCDC_HBP + 1);
 324
 325         /* Some parameters can't be zero */
 326         var->vsync_len = max_t(u32, var->vsync_len, 1);
 327         var->right_margin = max_t(u32, var->right_margin, 1);
 328         var->hsync_len = max_t(u32, var->hsync_len, 1);
 329         var->left_margin = max_t(u32, var->left_margin, 1);
 330
 331         switch (var->bits_per_pixel) {
 332         case 1:
 333         case 2:
 334         case 4:
 335         case 8:
 336                 var->red.offset = var->green.offset = var->blue.offset = 0;
 337                 var->red.length = var->green.length = var->blue.length
 338                         = var->bits_per_pixel;
 339                 break;
 340         case 15:
 341         case 16:
 342                 if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
 343                         /* RGB:565 mode */
 344                         var->red.offset = 11;
 345                         var->blue.offset = 0;
 346                         var->green.length = 6;
 347                 } else {
 348                         /* BGR:555 mode */
 349                         var->red.offset = 0;
 350                         var->blue.offset = 10;
 351                         var->green.length = 5;
 352                 }
 353                 var->green.offset = 5;
 354                 var->red.length = var->blue.length = 5;
 355                 break;
 356         case 32:
 357                 var->transp.offset = 24;
 358                 var->transp.length = 8;
 359                 /* fall through */
 360         case 24:
 361                 if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
 362                         /* RGB:888 mode */
 363                         var->red.offset = 16;
 364                         var->blue.offset = 0;
 365                 } else {
 366                         /* BGR:888 mode */
 367                         var->red.offset = 0;
 368                         var->blue.offset = 16;
 369                 }
 370                 var->green.offset = 8;
 371                 var->red.length = var->green.length = var->blue.length = 8;
 372                 break;
 373         default:
 374                 dev_err(dev, "color depth %d not supported\n",
 375                                         var->bits_per_pixel);
 376                 return -EINVAL;
 377         }
 378
 379         return 0;
 380 }
 381
 382 /**
 383  *      atmel_lcdfb_set_par - Alters the hardware state.
 384  *      @info: frame buffer structure that represents a single frame buffer
 385  *
 386  *      Using the fb_var_screeninfo in fb_info we set the resolution
 387  *      of the this particular framebuffer. This function alters the
 388  *      par AND the fb_fix_screeninfo stored in fb_info. It doesn't
 389  *      not alter var in fb_info since we are using that data. This
 390  *      means we depend on the data in var inside fb_info to be
 391  *      supported by the hardware.  atmel_lcdfb_check_var is always called
 392  *      before atmel_lcdfb_set_par to ensure this.  Again if you can't
 393  *      change the resolution you don't need this function.
 394  *
 395  */
 396 static int atmel_lcdfb_set_par(struct fb_info *info)
 397 {
 398         struct atmel_lcdfb_info *sinfo = info->par;
 399         unsigned long hozval_linesz;
 400         unsigned long value;
 401         unsigned long clk_value_khz;
 402         unsigned long bits_per_line;
 403
 404         dev_dbg(info->device, "%s:\n", __func__);
 405         dev_dbg(info->device, "  * resolution: %ux%u (%ux%u virtual)\n",
 406                  info->var.xres, info->var.yres,
 407                  info->var.xres_virtual, info->var.yres_virtual);
 408
 409         /* Turn off the LCD controller and the DMA controller */
 410         lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
 411
 412         /* Wait for the LCDC core to become idle */
 413         while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
 414                 msleep(10);
 415
 416         lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
 417
 418         if (info->var.bits_per_pixel == 1)
 419                 info->fix.visual = FB_VISUAL_MONO01;
 420         else if (info->var.bits_per_pixel <= 8)
 421                 info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
 422         else
 423                 info->fix.visual = FB_VISUAL_TRUECOLOR;
 424
 425         bits_per_line = info->var.xres_virtual * info->var.bits_per_pixel;
 426         info->fix.line_length = DIV_ROUND_UP(bits_per_line, 8);
 427
 428         /* Re-initialize the DMA engine... */
 429         dev_dbg(info->device, "  * update DMA engine\n");
 430         atmel_lcdfb_update_dma(info, &info->var);
 431
 432         /* ...set frame size and burst length = 8 words (?) */
 433         value = (info->var.yres * info->var.xres * info->var.bits_per_pixel) / 32;
 434         value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET);
 435         lcdc_writel(sinfo, ATMEL_LCDC_DMAFRMCFG, value);
 436
 437         /* Now, the LCDC core... */
 438
 439         /* Set pixel clock */
 440         clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
 441
 442         value = DIV_ROUND_UP(clk_value_khz, PICOS2KHZ(info->var.pixclock));
 443
 444         value = (value / 2) - 1;
 445         dev_dbg(info->device, "  * programming CLKVAL = 0x%08lx\n", value);
 446
 447         if (value <= 0) {
 448                 dev_notice(info->device, "Bypassing pixel clock divider\n");
 449                 lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
 450         } else {
 451                 lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET);
 452                 info->var.pixclock = KHZ2PICOS(clk_value_khz / (2 * (value + 1)));
 453                 dev_dbg(info->device, "  updated pixclk:     %lu KHz\n",
 454                                         PICOS2KHZ(info->var.pixclock));
 455         }
 456
 457
 458         /* Initialize control register 2 */
 459         value = sinfo->default_lcdcon2;
 460
 461         if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
 462                 value |= ATMEL_LCDC_INVLINE_INVERTED;
 463         if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
 464                 value |= ATMEL_LCDC_INVFRAME_INVERTED;
 465
 466         switch (info->var.bits_per_pixel) {
 467                 case 1: value |= ATMEL_LCDC_PIXELSIZE_1; break;
 468                 case 2: value |= ATMEL_LCDC_PIXELSIZE_2; break;
 469                 case 4: value |= ATMEL_LCDC_PIXELSIZE_4; break;
 470                 case 8: value |= ATMEL_LCDC_PIXELSIZE_8; break;
 471                 case 15: /* fall through */
 472                 case 16: value |= ATMEL_LCDC_PIXELSIZE_16; break;
 473                 case 24: value |= ATMEL_LCDC_PIXELSIZE_24; break;
 474                 case 32: value |= ATMEL_LCDC_PIXELSIZE_32; break;
 475                 default: BUG(); break;
 476         }
 477         dev_dbg(info->device, "  * LCDCON2 = %08lx\n", value);
 478         lcdc_writel(sinfo, ATMEL_LCDC_LCDCON2, value);
 479
 480         /* Vertical timing */
 481         value = (info->var.vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET;
 482         value |= info->var.upper_margin << ATMEL_LCDC_VBP_OFFSET;
 483         value |= info->var.lower_margin;
 484         dev_dbg(info->device, "  * LCDTIM1 = %08lx\n", value);
 485         lcdc_writel(sinfo, ATMEL_LCDC_TIM1, value);
 486
 487         /* Horizontal timing */
 488         value = (info->var.right_margin - 1) << ATMEL_LCDC_HFP_OFFSET;
 489         value |= (info->var.hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET;
 490         value |= (info->var.left_margin - 1);
 491         dev_dbg(info->device, "  * LCDTIM2 = %08lx\n", value);
 492         lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value);
 493
 494         /* Horizontal value (aka line size) */
 495         hozval_linesz = compute_hozval(info->var.xres,
 496                                         lcdc_readl(sinfo, ATMEL_LCDC_LCDCON2));
 497
 498         /* Display size */
 499         value = (hozval_linesz - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
 500         value |= info->var.yres - 1;
 501         dev_dbg(info->device, "  * LCDFRMCFG = %08lx\n", value);
 502         lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value);
 503
 504         /* FIFO Threshold: Use formula from data sheet */
 505         value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3);
 506         lcdc_writel(sinfo, ATMEL_LCDC_FIFO, value);
 507
 508         /* Toggle LCD_MODE every frame */
 509         lcdc_writel(sinfo, ATMEL_LCDC_MVAL, 0);
 510
 511         /* Disable all interrupts */
 512         lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
 513
 514         /* ...wait for DMA engine to become idle... */
 515         while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
 516                 msleep(10);
 517
 518         dev_dbg(info->device, "  * re-enable DMA engine\n");
 519         /* ...and enable it with updated configuration */
 520         lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
 521
 522         dev_dbg(info->device, "  * re-enable LCDC core\n");
 523         lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
 524                 (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
 525
 526         dev_dbg(info->device, "  * DONE\n");
 527
 528         return 0;
 529 }
 530
 531 static inline unsigned int chan_to_field(unsigned int chan, const struct fb_bitfield *bf)
 532 {
 533         chan &= 0xffff;
 534         chan >>= 16 - bf->length;
 535         return chan << bf->offset;
 536 }
 537
 538 /**
 539  *      atmel_lcdfb_setcolreg - Optional function. Sets a color register.
 540  *      @regno: Which register in the CLUT we are programming
 541  *      @red: The red value which can be up to 16 bits wide
 542  *      @green: The green value which can be up to 16 bits wide
 543  *      @blue:  The blue value which can be up to 16 bits wide.
 544  *      @transp: If supported the alpha value which can be up to 16 bits wide.
 545  *      @info: frame buffer info structure
 546  *
 547  *      Set a single color register. The values supplied have a 16 bit
 548  *      magnitude which needs to be scaled in this function for the hardware.
 549  *      Things to take into consideration are how many color registers, if
 550  *      any, are supported with the current color visual. With truecolor mode
 551  *      no color palettes are supported. Here a psuedo palette is created
 552  *      which we store the value in pseudo_palette in struct fb_info. For
 553  *      pseudocolor mode we have a limited color palette. To deal with this
 554  *      we can program what color is displayed for a particular pixel value.
 555  *      DirectColor is similar in that we can program each color field. If
 556  *      we have a static colormap we don't need to implement this function.
 557  *
 558  *      Returns negative errno on error, or zero on success. In an
 559  *      ideal world, this would have been the case, but as it turns
 560  *      out, the other drivers return 1 on failure, so that's what
 561  *      we're going to do.
 562  */
 563 static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
 564                              unsigned int green, unsigned int blue,
 565                              unsigned int transp, struct fb_info *info)
 566 {
 567         struct atmel_lcdfb_info *sinfo = info->par;
 568         unsigned int val;
 569         u32 *pal;
 570         int ret = 1;
 571
 572         if (info->var.grayscale)
 573                 red = green = blue = (19595 * red + 38470 * green
 574                                       + 7471 * blue) >> 16;
 575
 576         switch (info->fix.visual) {
 577         case FB_VISUAL_TRUECOLOR:
 578                 if (regno < 16) {
 579                         pal = info->pseudo_palette;
 580
 581                         val  = chan_to_field(red, &info->var.red);
 582                         val |= chan_to_field(green, &info->var.green);
 583                         val |= chan_to_field(blue, &info->var.blue);
 584
 585                         pal[regno] = val;
 586                         ret = 0;
 587                 }
 588                 break;
 589
 590         case FB_VISUAL_PSEUDOCOLOR:
 591                 if (regno < 256) {
 592                         val  = ((red   >> 11) & 0x001f);
 593                         val |= ((green >>  6) & 0x03e0);
 594                         val |= ((blue  >>  1) & 0x7c00);
 595
 596                         /*
 597                          * TODO: intensity bit. Maybe something like
 598                          *   ~(red[10] ^ green[10] ^ blue[10]) & 1
 599                          */
 600
 601                         lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
 602                         ret = 0;
 603                 }
 604                 break;
 605
 606         case FB_VISUAL_MONO01:
 607                 if (regno < 2) {
 608                         val = (regno == 0) ? 0x00 : 0x1F;
 609                         lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
 610                         ret = 0;
 611                 }
 612                 break;
 613
 614         }
 615
 616         return ret;
 617 }
 618
 619 static int atmel_lcdfb_pan_display(struct fb_var_screeninfo *var,
 620                                struct fb_info *info)
 621 {
 622         dev_dbg(info->device, "%s\n", __func__);
 623
 624         atmel_lcdfb_update_dma(info, var);
 625
 626         return 0;
 627 }
 628
 629 static struct fb_ops atmel_lcdfb_ops = {
 630         .owner          = THIS_MODULE,
 631         .fb_check_var   = atmel_lcdfb_check_var,
 632         .fb_set_par     = atmel_lcdfb_set_par,
 633         .fb_setcolreg   = atmel_lcdfb_setcolreg,
 634         .fb_pan_display = atmel_lcdfb_pan_display,
 635         .fb_fillrect    = cfb_fillrect,
 636         .fb_copyarea    = cfb_copyarea,
 637         .fb_imageblit   = cfb_imageblit,
 638 };
 639
 640 static irqreturn_t atmel_lcdfb_interrupt(int irq, void *dev_id)
 641 {
 642         struct fb_info *info = dev_id;
 643         struct atmel_lcdfb_info *sinfo = info->par;
 644         u32 status;
 645
 646         status = lcdc_readl(sinfo, ATMEL_LCDC_ISR);
 647         lcdc_writel(sinfo, ATMEL_LCDC_IDR, status);
 648         return IRQ_HANDLED;
 649 }
 650
 651 static int __init atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo)
 652 {
 653         struct fb_info *info = sinfo->info;
 654         int ret = 0;
 655
 656         info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
 657
 658         dev_info(info->device,
 659                "%luKiB frame buffer at %08lx (mapped at %p)\n",
 660                (unsigned long)info->fix.smem_len / 1024,
 661                (unsigned long)info->fix.smem_start,
 662                info->screen_base);
 663
 664         /* Allocate colormap */
 665         ret = fb_alloc_cmap(&info->cmap, 256, 0);
 666         if (ret < 0)
 667                 dev_err(info->device, "Alloc color map failed\n");
 668
 669         return ret;
 670 }
 671
 672 static void atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo)
 673 {
 674         if (sinfo->bus_clk)
 675                 clk_enable(sinfo->bus_clk);
 676         clk_enable(sinfo->lcdc_clk);
 677 }
 678
 679 static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo)
 680 {
 681         if (sinfo->bus_clk)
 682                 clk_disable(sinfo->bus_clk);
 683         clk_disable(sinfo->lcdc_clk);
 684 }
 685
 686
 687 static int __init atmel_lcdfb_probe(struct platform_device *pdev)
 688 {
 689         struct device *dev = &pdev->dev;
 690         struct fb_info *info;
 691         struct atmel_lcdfb_info *sinfo;
 692         struct atmel_lcdfb_info *pdata_sinfo;
 693         struct resource *regs = NULL;
 694         struct resource *map = NULL;
 695         int ret;
 696
 697         dev_dbg(dev, "%s BEGIN\n", __func__);
 698
 699         ret = -ENOMEM;
 700         info = framebuffer_alloc(sizeof(struct atmel_lcdfb_info), dev);
 701         if (!info) {
 702                 dev_err(dev, "cannot allocate memory\n");
 703                 goto out;
 704         }
 705
 706         sinfo = info->par;
 707
 708         if (dev->platform_data) {
 709                 pdata_sinfo = (struct atmel_lcdfb_info *)dev->platform_data;
 710                 sinfo->default_bpp = pdata_sinfo->default_bpp;
 711                 sinfo->default_dmacon = pdata_sinfo->default_dmacon;
 712                 sinfo->default_lcdcon2 = pdata_sinfo->default_lcdcon2;
 713                 sinfo->default_monspecs = pdata_sinfo->default_monspecs;
 714                 sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
 715                 sinfo->guard_time = pdata_sinfo->guard_time;
 716                 sinfo->lcdcon_is_backlight = pdata_sinfo->lcdcon_is_backlight;
 717                 sinfo->lcd_wiring_mode = pdata_sinfo->lcd_wiring_mode;
 718         } else {
 719                 dev_err(dev, "cannot get default configuration\n");
 720                 goto free_info;
 721         }
 722         sinfo->info = info;
 723         sinfo->pdev = pdev;
 724
 725         strcpy(info->fix.id, sinfo->pdev->name);
 726         info->flags = ATMEL_LCDFB_FBINFO_DEFAULT;
 727         info->pseudo_palette = sinfo->pseudo_palette;
 728         info->fbops = &atmel_lcdfb_ops;
 729
 730         memcpy(&info->monspecs, sinfo->default_monspecs, sizeof(info->monspecs));
 731         info->fix = atmel_lcdfb_fix;
 732
 733         /* Enable LCDC Clocks */
 734         if (cpu_is_at91sam9261() || cpu_is_at32ap7000()) {
 735                 sinfo->bus_clk = clk_get(dev, "hck1");
 736                 if (IS_ERR(sinfo->bus_clk)) {
 737                         ret = PTR_ERR(sinfo->bus_clk);
 738                         goto free_info;
 739                 }
 740         }
 741         sinfo->lcdc_clk = clk_get(dev, "lcdc_clk");
 742         if (IS_ERR(sinfo->lcdc_clk)) {
 743                 ret = PTR_ERR(sinfo->lcdc_clk);
 744                 goto put_bus_clk;
 745         }
 746         atmel_lcdfb_start_clock(sinfo);
 747
 748         ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb,
 749                         info->monspecs.modedb_len, info->monspecs.modedb,
 750                         sinfo->default_bpp);
 751         if (!ret) {
 752                 dev_err(dev, "no suitable video mode found\n");
 753                 goto stop_clk;
 754         }
 755
 756
 757         regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 758         if (!regs) {
 759                 dev_err(dev, "resources unusable\n");
 760                 ret = -ENXIO;
 761                 goto stop_clk;
 762         }
 763
 764         sinfo->irq_base = platform_get_irq(pdev, 0);
 765         if (sinfo->irq_base < 0) {
 766                 dev_err(dev, "unable to get irq\n");
 767                 ret = sinfo->irq_base;
 768                 goto stop_clk;
 769         }
 770
 771         /* Initialize video memory */
 772         map = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 773         if (map) {
 774                 /* use a pre-allocated memory buffer */
 775                 info->fix.smem_start = map->start;
 776                 info->fix.smem_len = map->end - map->start + 1;
 777                 if (!request_mem_region(info->fix.smem_start,
 778                                         info->fix.smem_len, pdev->name)) {
 779                         ret = -EBUSY;
 780                         goto stop_clk;
 781                 }
 782
 783                 info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
 784                 if (!info->screen_base)
 785                         goto release_intmem;
 786
 787                 /*
 788                  * Don't clear the framebuffer -- someone may have set
 789                  * up a splash image.
 790                  */
 791         } else {
 792                 /* alocate memory buffer */
 793                 ret = atmel_lcdfb_alloc_video_memory(sinfo);
 794                 if (ret < 0) {
 795                         dev_err(dev, "cannot allocate framebuffer: %d\n", ret);
 796                         goto stop_clk;
 797                 }
 798         }
 799
 800         /* LCDC registers */
 801         info->fix.mmio_start = regs->start;
 802         info->fix.mmio_len = regs->end - regs->start + 1;
 803
 804         if (!request_mem_region(info->fix.mmio_start,
 805                                 info->fix.mmio_len, pdev->name)) {
 806                 ret = -EBUSY;
 807                 goto free_fb;
 808         }
 809
 810         sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
 811         if (!sinfo->mmio) {
 812                 dev_err(dev, "cannot map LCDC registers\n");
 813                 goto release_mem;
 814         }
 815
 816         /* Initialize PWM for contrast or backlight ("off") */
 817         init_contrast(sinfo);
 818
 819         /* interrupt */
 820         ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info);
 821         if (ret) {
 822                 dev_err(dev, "request_irq failed: %d\n", ret);
 823                 goto unmap_mmio;
 824         }
 825
 826         ret = atmel_lcdfb_init_fbinfo(sinfo);
 827         if (ret < 0) {
 828                 dev_err(dev, "init fbinfo failed: %d\n", ret);
 829                 goto unregister_irqs;
 830         }
 831
 832         /*
 833          * This makes sure that our colour bitfield
 834          * descriptors are correctly initialised.
 835          */
 836         atmel_lcdfb_check_var(&info->var, info);
 837
 838         ret = fb_set_var(info, &info->var);
 839         if (ret) {
 840                 dev_warn(dev, "unable to set display parameters\n");
 841                 goto free_cmap;
 842         }
 843
 844         dev_set_drvdata(dev, info);
 845
 846         /*
 847          * Tell the world that we're ready to go
 848          */
 849         ret = register_framebuffer(info);
 850         if (ret < 0) {
 851                 dev_err(dev, "failed to register framebuffer device: %d\n", ret);
 852                 goto free_cmap;
 853         }
 854
 855         /* Power up the LCDC screen */
 856         if (sinfo->atmel_lcdfb_power_control)
 857                 sinfo->atmel_lcdfb_power_control(1);
 858
 859         dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %lu\n",
 860                        info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base);
 861
 862         return 0;
 863
 864
 865 free_cmap:
 866         fb_dealloc_cmap(&info->cmap);
 867 unregister_irqs:
 868         free_irq(sinfo->irq_base, info);
 869 unmap_mmio:
 870         exit_backlight(sinfo);
 871         iounmap(sinfo->mmio);
 872 release_mem:
 873         release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
 874 free_fb:
 875         if (map)
 876                 iounmap(info->screen_base);
 877         else
 878                 atmel_lcdfb_free_video_memory(sinfo);
 879
 880 release_intmem:
 881         if (map)
 882                 release_mem_region(info->fix.smem_start, info->fix.smem_len);
 883 stop_clk:
 884         atmel_lcdfb_stop_clock(sinfo);
 885         clk_put(sinfo->lcdc_clk);
 886 put_bus_clk:
 887         if (sinfo->bus_clk)
 888                 clk_put(sinfo->bus_clk);
 889 free_info:
 890         framebuffer_release(info);
 891 out:
 892         dev_dbg(dev, "%s FAILED\n", __func__);
 893         return ret;
 894 }
 895
 896 static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
 897 {
 898         struct device *dev = &pdev->dev;
 899         struct fb_info *info = dev_get_drvdata(dev);
 900         struct atmel_lcdfb_info *sinfo = info->par;
 901
 902         if (!sinfo)
 903                 return 0;
 904
 905         exit_backlight(sinfo);
 906         if (sinfo->atmel_lcdfb_power_control)
 907                 sinfo->atmel_lcdfb_power_control(0);
 908         unregister_framebuffer(info);
 909         atmel_lcdfb_stop_clock(sinfo);
 910         clk_put(sinfo->lcdc_clk);
 911         if (sinfo->bus_clk)
 912                 clk_put(sinfo->bus_clk);
 913         fb_dealloc_cmap(&info->cmap);
 914         free_irq(sinfo->irq_base, info);
 915         iounmap(sinfo->mmio);
 916         release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
 917         if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) {
 918                 iounmap(info->screen_base);
 919                 release_mem_region(info->fix.smem_start, info->fix.smem_len);
 920         } else {
 921                 atmel_lcdfb_free_video_memory(sinfo);
 922         }
 923
 924         dev_set_drvdata(dev, NULL);
 925         framebuffer_release(info);
 926
 927         return 0;
 928 }
 929
 930 #ifdef CONFIG_PM
 931
 932 static int atmel_lcdfb_suspend(struct platform_device *pdev, pm_message_t mesg)
 933 {
 934         struct fb_info *info = platform_get_drvdata(pdev);
 935         struct atmel_lcdfb_info *sinfo = info->par;
 936
 937         sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
 938         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0);
 939         if (sinfo->atmel_lcdfb_power_control)
 940                 sinfo->atmel_lcdfb_power_control(0);
 941         atmel_lcdfb_stop_clock(sinfo);
 942         return 0;
 943 }
 944
 945 static int atmel_lcdfb_resume(struct platform_device *pdev)
 946 {
 947         struct fb_info *info = platform_get_drvdata(pdev);
 948         struct atmel_lcdfb_info *sinfo = info->par;
 949
 950         atmel_lcdfb_start_clock(sinfo);
 951         if (sinfo->atmel_lcdfb_power_control)
 952                 sinfo->atmel_lcdfb_power_control(1);
 953         lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, sinfo->saved_lcdcon);
 954         return 0;
 955 }
 956
 957 #else
 958 #define atmel_lcdfb_suspend     NULL
 959 #define atmel_lcdfb_resume      NULL
 960 #endif
 961
 962 static struct platform_driver atmel_lcdfb_driver = {
 963         .remove         = __exit_p(atmel_lcdfb_remove),
 964         .suspend        = atmel_lcdfb_suspend,
 965         .resume         = atmel_lcdfb_resume,
 966
 967         .driver         = {
 968                 .name   = "atmel_lcdfb",
 969                 .owner  = THIS_MODULE,
 970         },
 971 };
 972
 973 static int __init atmel_lcdfb_init(void)
 974 {
 975         return platform_driver_probe(&atmel_lcdfb_driver, atmel_lcdfb_probe);
 976 }
 977
 978 static void __exit atmel_lcdfb_exit(void)
 979 {
 980         platform_driver_unregister(&atmel_lcdfb_driver);
 981 }
 982
 983 module_init(atmel_lcdfb_init);
 984 module_exit(atmel_lcdfb_exit);
 985
 986 MODULE_DESCRIPTION("AT91/AT32 LCD Controller framebuffer driver");
 987 MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>");
 988 MODULE_LICENSE("GPL");