SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/usb/serial/kl5kusb105.c

   1 /*
   2  * KLSI KL5KUSB105 chip RS232 converter driver
   3  *
   4  *   Copyright (C) 2001 Utz-Uwe Haus <haus@uuhaus.de>
   5  *
   6  *   This program is free software; you can redistribute it and/or modify
   7  *   it under the terms of the GNU General Public License as published by
   8  *   the Free Software Foundation; either version 2 of the License, or
   9  *   (at your option) any later version.
  10  *
  11  * All information about the device was acquired using SniffUSB ans snoopUSB
  12  * on Windows98.
  13  * It was written out of frustration with the PalmConnect USB Serial adapter
  14  * sold by Palm Inc.
  15  * Neither Palm, nor their contractor (MCCI) or their supplier (KLSI) provided
  16  * information that was not already available.
  17  *
  18  * It seems that KLSI bought some silicon-design information from ScanLogic,
  19  * whose SL11R processor is at the core of the KL5KUSB chipset from KLSI.
  20  * KLSI has firmware available for their devices; it is probable that the
  21  * firmware differs from that used by KLSI in their products. If you have an
  22  * original KLSI device and can provide some information on it, I would be
  23  * most interested in adding support for it here. If you have any information
  24  * on the protocol used (or find errors in my reverse-engineered stuff), please
  25  * let me know.
  26  *
  27  * The code was only tested with a PalmConnect USB adapter; if you
  28  * are adventurous, try it with any KLSI-based device and let me know how it
  29  * breaks so that I can fix it!
  30  */
  31
  32 /* TODO:
  33  *      check modem line signals
  34  *      implement handshaking or decide that we do not support it
  35  */
  36
  37 /* History:
  38  *   0.3a - implemented pools of write URBs
  39  *   0.3  - alpha version for public testing
  40  *   0.2  - TIOCMGET works, so autopilot(1) can be used!
  41  *   0.1  - can be used to to pilot-xfer -p /dev/ttyUSB0 -l
  42  *
  43  *   The driver skeleton is mainly based on mct_u232.c and various other
  44  *   pieces of code shamelessly copied from the drivers/usb/serial/ directory.
  45  */
  46
  47
  48 #include <linux/kernel.h>
  49 #include <linux/errno.h>
  50 #include <linux/init.h>
  51 #include <linux/slab.h>
  52 #include <linux/tty.h>
  53 #include <linux/tty_driver.h>
  54 #include <linux/tty_flip.h>
  55 #include <linux/module.h>
  56 #include <asm/uaccess.h>
  57 #include <linux/usb.h>
  58 #include <linux/usb/serial.h>
  59 #include "kl5kusb105.h"
  60
  61 static int debug;
  62
  63 /*
  64  * Version Information
  65  */
  66 #define DRIVER_VERSION "v0.3a"
  67 #define DRIVER_AUTHOR "Utz-Uwe Haus <haus@uuhaus.de>"
  68 #define DRIVER_DESC "KLSI KL5KUSB105 chipset USB->Serial Converter driver"
  69
  70
  71 /*
  72  * Function prototypes
  73  */
  74 static int  klsi_105_startup             (struct usb_serial *serial);
  75 static void klsi_105_shutdown            (struct usb_serial *serial);
  76 static int  klsi_105_open                (struct usb_serial_port *port,
  77                                           struct file *filp);
  78 static void klsi_105_close               (struct usb_serial_port *port,
  79                                           struct file *filp);
  80 static int  klsi_105_write               (struct usb_serial_port *port,
  81                                           const unsigned char *buf,
  82                                           int count);
  83 static void klsi_105_write_bulk_callback (struct urb *urb);
  84 static int  klsi_105_chars_in_buffer     (struct usb_serial_port *port);
  85 static int  klsi_105_write_room          (struct usb_serial_port *port);
  86
  87 static void klsi_105_read_bulk_callback  (struct urb *urb);
  88 static void klsi_105_set_termios         (struct usb_serial_port *port,
  89                                           struct ktermios *old);
  90 static void klsi_105_throttle            (struct usb_serial_port *port);
  91 static void klsi_105_unthrottle          (struct usb_serial_port *port);
  92 /*
  93 static void klsi_105_break_ctl           (struct usb_serial_port *port,
  94                                           int break_state );
  95  */
  96 static int  klsi_105_tiocmget            (struct usb_serial_port *port,
  97                                           struct file *file);
  98 static int  klsi_105_tiocmset            (struct usb_serial_port *port,
  99                                           struct file *file, unsigned int set,
 100                                           unsigned int clear);
 101
 102 /*
 103  * All of the device info needed for the KLSI converters.
 104  */
 105 static struct usb_device_id id_table [] = {
 106         { USB_DEVICE(PALMCONNECT_VID, PALMCONNECT_PID) },
 107         { USB_DEVICE(KLSI_VID, KLSI_KL5KUSB105D_PID) },
 108         { }             /* Terminating entry */
 109 };
 110
 111 MODULE_DEVICE_TABLE (usb, id_table);
 112
 113 static struct usb_driver kl5kusb105d_driver = {
 114         .name =         "kl5kusb105d",
 115         .probe =        usb_serial_probe,
 116         .disconnect =   usb_serial_disconnect,
 117         .id_table =     id_table,
 118         .no_dynamic_id =        1,
 119 };
 120
 121 static struct usb_serial_driver kl5kusb105d_device = {
 122         .driver = {
 123                 .owner =        THIS_MODULE,
 124                 .name =         "kl5kusb105d",
 125         },
 126         .description =       "KL5KUSB105D / PalmConnect",
 127         .usb_driver =        &kl5kusb105d_driver,
 128         .id_table =          id_table,
 129         .num_ports =         1,
 130         .open =              klsi_105_open,
 131         .close =             klsi_105_close,
 132         .write =             klsi_105_write,
 133         .write_bulk_callback = klsi_105_write_bulk_callback,
 134         .chars_in_buffer =   klsi_105_chars_in_buffer,
 135         .write_room =        klsi_105_write_room,
 136         .read_bulk_callback =klsi_105_read_bulk_callback,
 137         .set_termios =       klsi_105_set_termios,
 138         /*.break_ctl =       klsi_105_break_ctl,*/
 139         .tiocmget =          klsi_105_tiocmget,
 140         .tiocmset =          klsi_105_tiocmset,
 141         .attach =            klsi_105_startup,
 142         .shutdown =          klsi_105_shutdown,
 143         .throttle =          klsi_105_throttle,
 144         .unthrottle =        klsi_105_unthrottle,
 145 };
 146
 147 struct klsi_105_port_settings {
 148         __u8    pktlen;         /* always 5, it seems */
 149         __u8    baudrate;
 150         __u8    databits;
 151         __u8    unknown1;
 152         __u8    unknown2;
 153 } __attribute__ ((packed));
 154
 155 /* we implement a pool of NUM_URBS urbs per usb_serial */
 156 #define NUM_URBS                        1
 157 #define URB_TRANSFER_BUFFER_SIZE        64
 158 struct klsi_105_private {
 159         struct klsi_105_port_settings   cfg;
 160         struct ktermios                 termios;
 161         unsigned long                   line_state; /* modem line settings */
 162         /* write pool */
 163         struct urb *                    write_urb_pool[NUM_URBS];
 164         spinlock_t                      lock;
 165         unsigned long                   bytes_in;
 166         unsigned long                   bytes_out;
 167 };
 168
 169
 170 /*
 171  * Handle vendor specific USB requests
 172  */
 173
 174
 175 #define KLSI_TIMEOUT     5000 /* default urb timeout */
 176
 177 static int klsi_105_chg_port_settings(struct usb_serial_port *port,
 178                                       struct klsi_105_port_settings *settings)
 179 {
 180         int rc;
 181
 182         rc = usb_control_msg(port->serial->dev,
 183                              usb_sndctrlpipe(port->serial->dev, 0),
 184                              KL5KUSB105A_SIO_SET_DATA,
 185                              USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_INTERFACE,
 186                              0, /* value */
 187                              0, /* index */
 188                              settings,
 189                              sizeof(struct klsi_105_port_settings),
 190                              KLSI_TIMEOUT);
 191         if (rc < 0)
 192                 err("Change port settings failed (error = %d)", rc);
 193         info("%s - %d byte block, baudrate %x, databits %d, u1 %d, u2 %d",
 194             __func__,
 195             settings->pktlen,
 196             settings->baudrate, settings->databits,
 197             settings->unknown1, settings->unknown2);
 198         return rc;
 199 } /* klsi_105_chg_port_settings */
 200
 201 /* translate a 16-bit status value from the device to linux's TIO bits */
 202 static unsigned long klsi_105_status2linestate(const __u16 status)
 203 {
 204         unsigned long res = 0;
 205
 206         res =   ((status & KL5KUSB105A_DSR) ? TIOCM_DSR : 0)
 207               | ((status & KL5KUSB105A_CTS) ? TIOCM_CTS : 0)
 208               ;
 209
 210         return res;
 211 }
 212 /*
 213  * Read line control via vendor command and return result through
 214  * *line_state_p
 215  */
 216 /* It seems that the status buffer has always only 2 bytes length */
 217 #define KLSI_STATUSBUF_LEN      2
 218 static int klsi_105_get_line_state(struct usb_serial_port *port,
 219                                    unsigned long *line_state_p)
 220 {
 221         int rc;
 222         __u8 status_buf[KLSI_STATUSBUF_LEN] = { -1,-1};
 223         __u16 status;
 224
 225         info("%s - sending SIO Poll request", __func__);
 226         rc = usb_control_msg(port->serial->dev,
 227                              usb_rcvctrlpipe(port->serial->dev, 0),
 228                              KL5KUSB105A_SIO_POLL,
 229                              USB_TYPE_VENDOR | USB_DIR_IN,
 230                              0, /* value */
 231                              0, /* index */
 232                              status_buf, KLSI_STATUSBUF_LEN,
 233                              10000
 234                              );
 235         if (rc < 0)
 236                 err("Reading line status failed (error = %d)", rc);
 237         else {
 238                 status = le16_to_cpu(*(u16 *)status_buf);
 239
 240                 info("%s - read status %x %x", __func__,
 241                      status_buf[0], status_buf[1]);
 242
 243                 *line_state_p = klsi_105_status2linestate(status);
 244         }
 245
 246         return rc;
 247 }
 248
 249
 250 /*
 251  * Driver's tty interface functions
 252  */
 253
 254 static int klsi_105_startup (struct usb_serial *serial)
 255 {
 256         struct klsi_105_private *priv;
 257         int i, j;
 258
 259         /* check if we support the product id (see keyspan.c)
 260          * FIXME
 261          */
 262
 263         /* allocate the private data structure */
 264         for (i=0; i<serial->num_ports; i++) {
 265                 priv = kmalloc(sizeof(struct klsi_105_private),
 266                                                    GFP_KERNEL);
 267                 if (!priv) {
 268                         dbg("%skmalloc for klsi_105_private failed.", __func__);
 269                         i--;
 270                         goto err_cleanup;
 271                 }
 272                 /* set initial values for control structures */
 273                 priv->cfg.pktlen    = 5;
 274                 priv->cfg.baudrate  = kl5kusb105a_sio_b9600;
 275                 priv->cfg.databits  = kl5kusb105a_dtb_8;
 276                 priv->cfg.unknown1  = 0;
 277                 priv->cfg.unknown2  = 1;
 278
 279                 priv->line_state    = 0;
 280
 281                 priv->bytes_in      = 0;
 282                 priv->bytes_out     = 0;
 283                 usb_set_serial_port_data(serial->port[i], priv);
 284
 285                 spin_lock_init (&priv->lock);
 286                 for (j=0; j<NUM_URBS; j++) {
 287                         struct urb* urb = usb_alloc_urb(0, GFP_KERNEL);
 288
 289                         priv->write_urb_pool[j] = urb;
 290                         if (urb == NULL) {
 291                                 err("No more urbs???");
 292                                 goto err_cleanup;
 293                         }
 294
 295                         urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE,
 296                                                         GFP_KERNEL);
 297                         if (!urb->transfer_buffer) {
 298                                 err("%s - out of memory for urb buffers.", __func__);
 299                                 goto err_cleanup;
 300                         }
 301                 }
 302
 303                 /* priv->termios is left uninitalized until port opening */
 304                 init_waitqueue_head(&serial->port[i]->write_wait);
 305         }
 306
 307         return 0;
 308
 309 err_cleanup:
 310         for (; i >= 0; i--) {
 311                 priv = usb_get_serial_port_data(serial->port[i]);
 312                 for (j=0; j < NUM_URBS; j++) {
 313                         if (priv->write_urb_pool[j]) {
 314                                 kfree(priv->write_urb_pool[j]->transfer_buffer);
 315                                 usb_free_urb(priv->write_urb_pool[j]);
 316                         }
 317                 }
 318                 usb_set_serial_port_data(serial->port[i], NULL);
 319         }
 320         return -ENOMEM;
 321 } /* klsi_105_startup */
 322
 323
 324 static void klsi_105_shutdown (struct usb_serial *serial)
 325 {
 326         int i;
 327
 328         dbg("%s", __func__);
 329
 330         /* stop reads and writes on all ports */
 331         for (i=0; i < serial->num_ports; ++i) {
 332                 struct klsi_105_private *priv = usb_get_serial_port_data(serial->port[i]);
 333                 unsigned long flags;
 334
 335                 if (priv) {
 336                         /* kill our write urb pool */
 337                         int j;
 338                         struct urb **write_urbs = priv->write_urb_pool;
 339                         spin_lock_irqsave(&priv->lock,flags);
 340
 341                         for (j = 0; j < NUM_URBS; j++) {
 342                                 if (write_urbs[j]) {
 343                                         /* FIXME - uncomment the following
 344                                          * usb_kill_urb call when the host
 345                                          * controllers get fixed to set
 346                                          * urb->dev = NULL after the urb is
 347                                          * finished.  Otherwise this call
 348                                          * oopses. */
 349                                         /* usb_kill_urb(write_urbs[j]); */
 350                                         kfree(write_urbs[j]->transfer_buffer);
 351                                         usb_free_urb (write_urbs[j]);
 352                                 }
 353                         }
 354
 355                         spin_unlock_irqrestore (&priv->lock, flags);
 356
 357                         kfree(priv);
 358                         usb_set_serial_port_data(serial->port[i], NULL);
 359                 }
 360         }
 361 } /* klsi_105_shutdown */
 362
 363 static int  klsi_105_open (struct usb_serial_port *port, struct file *filp)
 364 {
 365         struct klsi_105_private *priv = usb_get_serial_port_data(port);
 366         int retval = 0;
 367         int rc;
 368         int i;
 369         unsigned long line_state;
 370         struct klsi_105_port_settings cfg;
 371         unsigned long flags;
 372
 373         dbg("%s port %d", __func__, port->number);
 374
 375         /* force low_latency on so that our tty_push actually forces
 376          * the data through
 377          * port->tty->low_latency = 1; */
 378
 379         /* Do a defined restart:
 380          * Set up sane default baud rate and send the 'READ_ON'
 381          * vendor command.
 382          * FIXME: set modem line control (how?)
 383          * Then read the modem line control and store values in
 384          * priv->line_state.
 385          */
 386         cfg.pktlen   = 5;
 387         cfg.baudrate = kl5kusb105a_sio_b9600;
 388         cfg.databits = kl5kusb105a_dtb_8;
 389         cfg.unknown1 = 0;
 390         cfg.unknown2 = 1;
 391         klsi_105_chg_port_settings(port, &cfg);
 392
 393         /* set up termios structure */
 394         spin_lock_irqsave (&priv->lock, flags);
 395         priv->termios.c_iflag = port->tty->termios->c_iflag;
 396         priv->termios.c_oflag = port->tty->termios->c_oflag;
 397         priv->termios.c_cflag = port->tty->termios->c_cflag;
 398         priv->termios.c_lflag = port->tty->termios->c_lflag;
 399         for (i=0; i<NCCS; i++)
 400                 priv->termios.c_cc[i] = port->tty->termios->c_cc[i];
 401         priv->cfg.pktlen   = cfg.pktlen;
 402         priv->cfg.baudrate = cfg.baudrate;
 403         priv->cfg.databits = cfg.databits;
 404         priv->cfg.unknown1 = cfg.unknown1;
 405         priv->cfg.unknown2 = cfg.unknown2;
 406         spin_unlock_irqrestore (&priv->lock, flags);
 407
 408         /* READ_ON and urb submission */
 409         usb_fill_bulk_urb(port->read_urb, port->serial->dev,
 410                       usb_rcvbulkpipe(port->serial->dev,
 411                                       port->bulk_in_endpointAddress),
 412                       port->read_urb->transfer_buffer,
 413                       port->read_urb->transfer_buffer_length,
 414                       klsi_105_read_bulk_callback,
 415                       port);
 416
 417         rc = usb_submit_urb(port->read_urb, GFP_KERNEL);
 418         if (rc) {
 419                 err("%s - failed submitting read urb, error %d", __func__, rc);
 420                 retval = rc;
 421                 goto exit;
 422         }
 423
 424         rc = usb_control_msg(port->serial->dev,
 425                              usb_sndctrlpipe(port->serial->dev,0),
 426                              KL5KUSB105A_SIO_CONFIGURE,
 427                              USB_TYPE_VENDOR|USB_DIR_OUT|USB_RECIP_INTERFACE,
 428                              KL5KUSB105A_SIO_CONFIGURE_READ_ON,
 429                              0, /* index */
 430                              NULL,
 431                              0,
 432                              KLSI_TIMEOUT);
 433         if (rc < 0) {
 434                 err("Enabling read failed (error = %d)", rc);
 435                 retval = rc;
 436         } else
 437                 dbg("%s - enabled reading", __func__);
 438
 439         rc = klsi_105_get_line_state(port, &line_state);
 440         if (rc >= 0) {
 441                 spin_lock_irqsave (&priv->lock, flags);
 442                 priv->line_state = line_state;
 443                 spin_unlock_irqrestore (&priv->lock, flags);
 444                 dbg("%s - read line state 0x%lx", __func__, line_state);
 445                 retval = 0;
 446         } else
 447                 retval = rc;
 448
 449 exit:
 450         return retval;
 451 } /* klsi_105_open */
 452
 453
 454 static void klsi_105_close (struct usb_serial_port *port, struct file *filp)
 455 {
 456         struct klsi_105_private *priv = usb_get_serial_port_data(port);
 457         int rc;
 458
 459         dbg("%s port %d", __func__, port->number);
 460
 461         mutex_lock(&port->serial->disc_mutex);
 462         if (!port->serial->disconnected) {
 463                 /* send READ_OFF */
 464                 rc = usb_control_msg (port->serial->dev,
 465                                       usb_sndctrlpipe(port->serial->dev, 0),
 466                                       KL5KUSB105A_SIO_CONFIGURE,
 467                                       USB_TYPE_VENDOR | USB_DIR_OUT,
 468                                       KL5KUSB105A_SIO_CONFIGURE_READ_OFF,
 469                                       0, /* index */
 470                                       NULL, 0,
 471                                       KLSI_TIMEOUT);
 472                 if (rc < 0)
 473                         err("Disabling read failed (error = %d)", rc);
 474         }
 475         mutex_unlock(&port->serial->disc_mutex);
 476
 477         /* shutdown our bulk reads and writes */
 478         usb_kill_urb(port->write_urb);
 479         usb_kill_urb(port->read_urb);
 480         /* unlink our write pool */
 481         /* FIXME */
 482         /* wgg - do I need this? I think so. */
 483         usb_kill_urb(port->interrupt_in_urb);
 484         info("kl5kusb105 port stats: %ld bytes in, %ld bytes out", priv->bytes_in, priv->bytes_out);
 485 } /* klsi_105_close */
 486
 487
 488 /* We need to write a complete 64-byte data block and encode the
 489  * number actually sent in the first double-byte, LSB-order. That
 490  * leaves at most 62 bytes of payload.
 491  */
 492 #define KLSI_105_DATA_OFFSET    2   /* in the bulk urb data block */
 493
 494
 495 static int klsi_105_write (struct usb_serial_port *port,
 496                            const unsigned char *buf, int count)
 497 {
 498         struct klsi_105_private *priv = usb_get_serial_port_data(port);
 499         int result, size;
 500         int bytes_sent=0;
 501
 502         dbg("%s - port %d", __func__, port->number);
 503
 504         while (count > 0) {
 505                 /* try to find a free urb (write 0 bytes if none) */
 506                 struct urb *urb = NULL;
 507                 unsigned long flags;
 508                 int i;
 509                 /* since the pool is per-port we might not need the spin lock !? */
 510                 spin_lock_irqsave (&priv->lock, flags);
 511                 for (i=0; i<NUM_URBS; i++) {
 512                         if (priv->write_urb_pool[i]->status != -EINPROGRESS) {
 513                                 urb = priv->write_urb_pool[i];
 514                                 dbg("%s - using pool URB %d", __func__, i);
 515                                 break;
 516                         }
 517                 }
 518                 spin_unlock_irqrestore (&priv->lock, flags);
 519
 520                 if (urb==NULL) {
 521                         dbg("%s - no more free urbs", __func__);
 522                         goto exit;
 523                 }
 524
 525                 if (urb->transfer_buffer == NULL) {
 526                         urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC);
 527                         if (urb->transfer_buffer == NULL) {
 528                                 err("%s - no more kernel memory...", __func__);
 529                                 goto exit;
 530                         }
 531                 }
 532
 533                 size = min (count, port->bulk_out_size - KLSI_105_DATA_OFFSET);
 534                 size = min (size, URB_TRANSFER_BUFFER_SIZE - KLSI_105_DATA_OFFSET);
 535
 536                 memcpy (urb->transfer_buffer + KLSI_105_DATA_OFFSET, buf, size);
 537
 538                 /* write payload size into transfer buffer */
 539                 ((__u8 *)urb->transfer_buffer)[0] = (__u8) (size & 0xFF);
 540                 ((__u8 *)urb->transfer_buffer)[1] = (__u8) ((size & 0xFF00)>>8);
 541
 542                 /* set up our urb */
 543                 usb_fill_bulk_urb(urb, port->serial->dev,
 544                               usb_sndbulkpipe(port->serial->dev,
 545                                               port->bulk_out_endpointAddress),
 546                               urb->transfer_buffer,
 547                               URB_TRANSFER_BUFFER_SIZE,
 548                               klsi_105_write_bulk_callback,
 549                               port);
 550
 551                 /* send the data out the bulk port */
 552                 result = usb_submit_urb(urb, GFP_ATOMIC);
 553                 if (result) {
 554                         err("%s - failed submitting write urb, error %d", __func__, result);
 555                         goto exit;
 556                 }
 557                 buf += size;
 558                 bytes_sent += size;
 559                 count -= size;
 560         }
 561 exit:
 562         /* lockless, but it's for debug info only... */
 563         priv->bytes_out+=bytes_sent;
 564
 565         return bytes_sent;      /* that's how much we wrote */
 566 } /* klsi_105_write */
 567
 568 static void klsi_105_write_bulk_callback ( struct urb *urb)
 569 {
 570         struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
 571         int status = urb->status;
 572
 573         dbg("%s - port %d", __func__, port->number);
 574
 575         if (status) {
 576                 dbg("%s - nonzero write bulk status received: %d", __func__,
 577                     status);
 578                 return;
 579         }
 580
 581         usb_serial_port_softint(port);
 582 } /* klsi_105_write_bulk_completion_callback */
 583
 584
 585 /* return number of characters currently in the writing process */
 586 static int klsi_105_chars_in_buffer (struct usb_serial_port *port)
 587 {
 588         int chars = 0;
 589         int i;
 590         unsigned long flags;
 591         struct klsi_105_private *priv = usb_get_serial_port_data(port);
 592
 593         spin_lock_irqsave (&priv->lock, flags);
 594
 595         for (i = 0; i < NUM_URBS; ++i) {
 596                 if (priv->write_urb_pool[i]->status == -EINPROGRESS) {
 597                         chars += URB_TRANSFER_BUFFER_SIZE;
 598                 }
 599         }
 600
 601         spin_unlock_irqrestore (&priv->lock, flags);
 602
 603         dbg("%s - returns %d", __func__, chars);
 604         return (chars);
 605 }
 606
 607 static int klsi_105_write_room (struct usb_serial_port *port)
 608 {
 609         unsigned long flags;
 610         int i;
 611         int room = 0;
 612         struct klsi_105_private *priv = usb_get_serial_port_data(port);
 613
 614         spin_lock_irqsave (&priv->lock, flags);
 615         for (i = 0; i < NUM_URBS; ++i) {
 616                 if (priv->write_urb_pool[i]->status != -EINPROGRESS) {
 617                         room += URB_TRANSFER_BUFFER_SIZE;
 618                 }
 619         }
 620
 621         spin_unlock_irqrestore (&priv->lock, flags);
 622
 623         dbg("%s - returns %d", __func__, room);
 624         return (room);
 625 }
 626
 627
 628
 629 static void klsi_105_read_bulk_callback (struct urb *urb)
 630 {
 631         struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
 632         struct klsi_105_private *priv = usb_get_serial_port_data(port);
 633         struct tty_struct *tty;
 634         unsigned char *data = urb->transfer_buffer;
 635         int rc;
 636         int status = urb->status;
 637
 638         dbg("%s - port %d", __func__, port->number);
 639
 640         /* The urb might have been killed. */
 641         if (status) {
 642                 dbg("%s - nonzero read bulk status received: %d", __func__,
 643                     status);
 644                 return;
 645         }
 646
 647         /* The data received is again preceded by a length double-byte in LSB-
 648          * first order (see klsi_105_write() )
 649          */
 650         if (urb->actual_length == 0) {
 651                 /* empty urbs seem to happen, we ignore them */
 652                 /* dbg("%s - emtpy URB", __func__); */
 653                ;
 654         } else if (urb->actual_length <= 2) {
 655                 dbg("%s - size %d URB not understood", __func__,
 656                     urb->actual_length);
 657                 usb_serial_debug_data(debug, &port->dev, __func__,
 658                                       urb->actual_length, data);
 659         } else {
 660                 int bytes_sent = ((__u8 *) data)[0] +
 661                                  ((unsigned int) ((__u8 *) data)[1] << 8);
 662                 tty = port->tty;
 663                 /* we should immediately resubmit the URB, before attempting
 664                  * to pass the data on to the tty layer. But that needs locking
 665                  * against re-entry an then mixed-up data because of
 666                  * intermixed tty_flip_buffer_push()s
 667                  * FIXME
 668                  */
 669                 usb_serial_debug_data(debug, &port->dev, __func__,
 670                                       urb->actual_length, data);
 671
 672                 if (bytes_sent + 2 > urb->actual_length) {
 673                         dbg("%s - trying to read more data than available"
 674                             " (%d vs. %d)", __func__,
 675                             bytes_sent+2, urb->actual_length);
 676                         /* cap at implied limit */
 677                         bytes_sent = urb->actual_length - 2;
 678                 }
 679
 680                 tty_buffer_request_room(tty, bytes_sent);
 681                 tty_insert_flip_string(tty, data + 2, bytes_sent);
 682                 tty_flip_buffer_push(tty);
 683
 684                 /* again lockless, but debug info only */
 685                 priv->bytes_in += bytes_sent;
 686         }
 687         /* Continue trying to always read  */
 688         usb_fill_bulk_urb(port->read_urb, port->serial->dev,
 689                       usb_rcvbulkpipe(port->serial->dev,
 690                                       port->bulk_in_endpointAddress),
 691                       port->read_urb->transfer_buffer,
 692                       port->read_urb->transfer_buffer_length,
 693                       klsi_105_read_bulk_callback,
 694                       port);
 695         rc = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 696         if (rc)
 697                 err("%s - failed resubmitting read urb, error %d", __func__, rc);
 698 } /* klsi_105_read_bulk_callback */
 699
 700
 701 static void klsi_105_set_termios (struct usb_serial_port *port,
 702                                   struct ktermios *old_termios)
 703 {
 704         struct klsi_105_private *priv = usb_get_serial_port_data(port);
 705         unsigned int iflag = port->tty->termios->c_iflag;
 706         unsigned int old_iflag = old_termios->c_iflag;
 707         unsigned int cflag = port->tty->termios->c_cflag;
 708         unsigned int old_cflag = old_termios->c_cflag;
 709         struct klsi_105_port_settings cfg;
 710         unsigned long flags;
 711
 712         /* lock while we are modifying the settings */
 713         spin_lock_irqsave (&priv->lock, flags);
 714
 715         /*
 716          * Update baud rate
 717          */
 718         if( (cflag & CBAUD) != (old_cflag & CBAUD) ) {
 719                 /* reassert DTR and (maybe) RTS on transition from B0 */
 720                 if( (old_cflag & CBAUD) == B0 ) {
 721                         dbg("%s: baud was B0", __func__);
 722 #if 0
 723                         priv->control_state |= TIOCM_DTR;
 724                         /* don't set RTS if using hardware flow control */
 725                         if (!(old_cflag & CRTSCTS)) {
 726                                 priv->control_state |= TIOCM_RTS;
 727                         }
 728                         mct_u232_set_modem_ctrl(serial, priv->control_state);
 729 #endif
 730                 }
 731
 732                 switch(tty_get_baud_rate(port->tty)) {
 733                 case 0: /* handled below */
 734                         break;
 735                 case 1200:
 736                         priv->cfg.baudrate = kl5kusb105a_sio_b1200;
 737                         break;
 738                 case 2400:
 739                         priv->cfg.baudrate = kl5kusb105a_sio_b2400;
 740                         break;
 741                 case 4800:
 742                         priv->cfg.baudrate = kl5kusb105a_sio_b4800;
 743                         break;
 744                 case 9600:
 745                         priv->cfg.baudrate = kl5kusb105a_sio_b9600;
 746                         break;
 747                 case 19200:
 748                         priv->cfg.baudrate = kl5kusb105a_sio_b19200;
 749                         break;
 750                 case 38400:
 751                         priv->cfg.baudrate = kl5kusb105a_sio_b38400;
 752                         break;
 753                 case 57600:
 754                         priv->cfg.baudrate = kl5kusb105a_sio_b57600;
 755                         break;
 756                 case 115200:
 757                         priv->cfg.baudrate = kl5kusb105a_sio_b115200;
 758                         break;
 759                 default:
 760                         err("KLSI USB->Serial converter:"
 761                             " unsupported baudrate request, using default"
 762                             " of 9600");
 763                         priv->cfg.baudrate = kl5kusb105a_sio_b9600;
 764                         break;
 765                 }
 766                 if ((cflag & CBAUD) == B0 ) {
 767                         dbg("%s: baud is B0", __func__);
 768                         /* Drop RTS and DTR */
 769                         /* maybe this should be simulated by sending read
 770                          * disable and read enable messages?
 771                          */
 772                         ;
 773 #if 0
 774                         priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
 775                         mct_u232_set_modem_ctrl(serial, priv->control_state);
 776 #endif
 777                 }
 778         }
 779
 780         if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
 781                 /* set the number of data bits */
 782                 switch (cflag & CSIZE) {
 783                 case CS5:
 784                         dbg("%s - 5 bits/byte not supported", __func__);
 785                         spin_unlock_irqrestore (&priv->lock, flags);
 786                         return ;
 787                 case CS6:
 788                         dbg("%s - 6 bits/byte not supported", __func__);
 789                         spin_unlock_irqrestore (&priv->lock, flags);
 790                         return ;
 791                 case CS7:
 792                         priv->cfg.databits = kl5kusb105a_dtb_7;
 793                         break;
 794                 case CS8:
 795                         priv->cfg.databits = kl5kusb105a_dtb_8;
 796                         break;
 797                 default:
 798                         err("CSIZE was not CS5-CS8, using default of 8");
 799                         priv->cfg.databits = kl5kusb105a_dtb_8;
 800                         break;
 801                 }
 802         }
 803
 804         /*
 805          * Update line control register (LCR)
 806          */
 807         if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))
 808             || (cflag & CSTOPB) != (old_cflag & CSTOPB) ) {
 809
 810 #if 0
 811                 priv->last_lcr = 0;
 812
 813                 /* set the parity */
 814                 if (cflag & PARENB)
 815                         priv->last_lcr |= (cflag & PARODD) ?
 816                                 MCT_U232_PARITY_ODD : MCT_U232_PARITY_EVEN;
 817                 else
 818                         priv->last_lcr |= MCT_U232_PARITY_NONE;
 819
 820                 /* set the number of stop bits */
 821                 priv->last_lcr |= (cflag & CSTOPB) ?
 822                         MCT_U232_STOP_BITS_2 : MCT_U232_STOP_BITS_1;
 823
 824                 mct_u232_set_line_ctrl(serial, priv->last_lcr);
 825 #endif
 826                 ;
 827         }
 828
 829         /*
 830          * Set flow control: well, I do not really now how to handle DTR/RTS.
 831          * Just do what we have seen with SniffUSB on Win98.
 832          */
 833         if( (iflag & IXOFF) != (old_iflag & IXOFF)
 834             || (iflag & IXON) != (old_iflag & IXON)
 835             ||  (cflag & CRTSCTS) != (old_cflag & CRTSCTS) ) {
 836
 837                 /* Drop DTR/RTS if no flow control otherwise assert */
 838 #if 0
 839                 if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS) )
 840                         priv->control_state |= TIOCM_DTR | TIOCM_RTS;
 841                 else
 842                         priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
 843                 mct_u232_set_modem_ctrl(serial, priv->control_state);
 844 #endif
 845                 ;
 846         }
 847         memcpy (&cfg, &priv->cfg, sizeof(cfg));
 848         spin_unlock_irqrestore (&priv->lock, flags);
 849
 850         /* now commit changes to device */
 851         klsi_105_chg_port_settings(port, &cfg);
 852 } /* klsi_105_set_termios */
 853
 854
 855 #if 0
 856 static void mct_u232_break_ctl( struct usb_serial_port *port, int break_state )
 857 {
 858         struct usb_serial *serial = port->serial;
 859         struct mct_u232_private *priv = (struct mct_u232_private *)port->private;
 860         unsigned char lcr = priv->last_lcr;
 861
 862         dbg("%sstate=%d", __func__, break_state);
 863
 864         if (break_state)
 865                 lcr |= MCT_U232_SET_BREAK;
 866
 867         mct_u232_set_line_ctrl(serial, lcr);
 868 } /* mct_u232_break_ctl */
 869 #endif
 870
 871 static int klsi_105_tiocmget (struct usb_serial_port *port, struct file *file)
 872 {
 873         struct klsi_105_private *priv = usb_get_serial_port_data(port);
 874         unsigned long flags;
 875         int rc;
 876         unsigned long line_state;
 877         dbg("%s - request, just guessing", __func__);
 878
 879         rc = klsi_105_get_line_state(port, &line_state);
 880         if (rc < 0) {
 881                 err("Reading line control failed (error = %d)", rc);
 882                 /* better return value? EAGAIN? */
 883                 return rc;
 884         }
 885
 886         spin_lock_irqsave (&priv->lock, flags);
 887         priv->line_state = line_state;
 888         spin_unlock_irqrestore (&priv->lock, flags);
 889         dbg("%s - read line state 0x%lx", __func__, line_state);
 890         return (int)line_state;
 891 }
 892
 893 static int klsi_105_tiocmset (struct usb_serial_port *port, struct file *file,
 894                               unsigned int set, unsigned int clear)
 895 {
 896         int retval = -EINVAL;
 897
 898         dbg("%s", __func__);
 899
 900 /* if this ever gets implemented, it should be done something like this:
 901         struct usb_serial *serial = port->serial;
 902         struct klsi_105_private *priv = usb_get_serial_port_data(port);
 903         unsigned long flags;
 904         int control;
 905
 906         spin_lock_irqsave (&priv->lock, flags);
 907         if (set & TIOCM_RTS)
 908                 priv->control_state |= TIOCM_RTS;
 909         if (set & TIOCM_DTR)
 910                 priv->control_state |= TIOCM_DTR;
 911         if (clear & TIOCM_RTS)
 912                 priv->control_state &= ~TIOCM_RTS;
 913         if (clear & TIOCM_DTR)
 914                 priv->control_state &= ~TIOCM_DTR;
 915         control = priv->control_state;
 916         spin_unlock_irqrestore (&priv->lock, flags);
 917         retval = mct_u232_set_modem_ctrl(serial, control);
 918 */
 919         return retval;
 920 }
 921
 922 static void klsi_105_throttle (struct usb_serial_port *port)
 923 {
 924         dbg("%s - port %d", __func__, port->number);
 925         usb_kill_urb(port->read_urb);
 926 }
 927
 928 static void klsi_105_unthrottle (struct usb_serial_port *port)
 929 {
 930         int result;
 931
 932         dbg("%s - port %d", __func__, port->number);
 933
 934         port->read_urb->dev = port->serial->dev;
 935         result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 936         if (result)
 937                 err("%s - failed submitting read urb, error %d", __func__,
 938                     result);
 939 }
 940
 941
 942
 943 static int __init klsi_105_init (void)
 944 {
 945         int retval;
 946         retval = usb_serial_register(&kl5kusb105d_device);
 947         if (retval)
 948                 goto failed_usb_serial_register;
 949         retval = usb_register(&kl5kusb105d_driver);
 950         if (retval)
 951                 goto failed_usb_register;
 952
 953         info(DRIVER_DESC " " DRIVER_VERSION);
 954         return 0;
 955 failed_usb_register:
 956         usb_serial_deregister(&kl5kusb105d_device);
 957 failed_usb_serial_register:
 958         return retval;
 959 }
 960
 961
 962 static void __exit klsi_105_exit (void)
 963 {
 964         usb_deregister (&kl5kusb105d_driver);
 965         usb_serial_deregister (&kl5kusb105d_device);
 966 }
 967
 968
 969 module_init (klsi_105_init);
 970 module_exit (klsi_105_exit);
 971
 972 MODULE_AUTHOR( DRIVER_AUTHOR );
 973 MODULE_DESCRIPTION( DRIVER_DESC );
 974 MODULE_LICENSE("GPL");
 975
 976
 977 module_param(debug, bool, S_IRUGO | S_IWUSR);
 978 MODULE_PARM_DESC(debug, "enable extensive debugging messages");
 979
 980 /* vim: set sts=8 ts=8 sw=8: */