USB: Support for the Evolution Scorpion robots

[safe/jmp/linux-2.6] / drivers / usb / serial / ftdi_sio.c

/*
 * USB FTDI SIO driver
 *
 *      Copyright (C) 1999 - 2001
 *          Greg Kroah-Hartman (greg@kroah.com)
 *          Bill Ryder (bryder@sgi.com)
 *      Copyright (C) 2002
 *          Kuba Ober (kuba@mareimbrium.org)
 *
 *      This program is free software; you can redistribute it and/or modify
 *      it under the terms of the GNU General Public License as published by
 *      the Free Software Foundation; either version 2 of the License, or
 *      (at your option) any later version.
 *
 * See Documentation/usb/usb-serial.txt for more information on using this driver
 *
 * See http://ftdi-usb-sio.sourceforge.net for upto date testing info
 *      and extra documentation
 *
 * (21/Jul/2004) Ian Abbott
 *      Incorporated Steven Turner's code to add support for the FT2232C chip.
 *      The prelimilary port to the 2.6 kernel was by Rus V. Brushkoff.  I have
 *      fixed a couple of things.
 *
 * (27/May/2004) Ian Abbott
 *      Improved throttling code, mostly stolen from the WhiteHEAT driver.
 *
 * (26/Mar/2004) Jan Capek
 *      Added PID's for ICD-U20/ICD-U40 - incircuit PIC debuggers from CCS Inc.
 *
 * (09/Feb/2004) Ian Abbott
 *      Changed full name of USB-UIRT device to avoid "/" character.
 *      Added FTDI's alternate PID (0x6006) for FT232/245 devices.
 *      Added PID for "ELV USB Module UO100" from Stefan Frings.
 *
 * (21/Oct/2003) Ian Abbott
 *      Renamed some VID/PID macros for Matrix Orbital and Perle Systems
 *      devices.  Removed Matrix Orbital and Perle Systems devices from the
 *      8U232AM device table, but left them in the FT232BM table, as they are
 *      known to use only FT232BM.
 *
 * (17/Oct/2003) Scott Allen
 *      Added vid/pid for Perle Systems UltraPort USB serial converters
 *
 * (21/Sep/2003) Ian Abbott
 *      Added VID/PID for Omnidirectional Control Technology US101 USB to
 *      RS-232 adapter (also rebadged as Dick Smith Electronics XH6381).
 *      VID/PID supplied by Donald Gordon.
 *
 * (19/Aug/2003) Ian Abbott
 *      Freed urb's transfer buffer in write bulk callback.
 *      Omitted some paranoid checks in write bulk callback that don't matter.
 *      Scheduled work in write bulk callback regardless of port's open count.
 *
 * (05/Aug/2003) Ian Abbott
 *      Added VID/PID for ID TECH IDT1221U USB to RS-232 adapter.
 *      VID/PID provided by Steve Briggs.
 *
 * (23/Jul/2003) Ian Abbott
 *      Added PIDs for CrystalFontz 547, 633, 631, 635, 640 and 640 from
 *      Wayne Wylupski.
 *
 * (10/Jul/2003) David Glance
 *      Added PID for DSS-20 SyncStation cradle for Sony-Ericsson P800.
 *
 * (27/Jun/2003) Ian Abbott
 *      Reworked the urb handling logic.  We have no more pool, but dynamically
 *      allocate the urb and the transfer buffer on the fly.  In testing this
 *      does not incure any measurable overhead.  This also relies on the fact
 *      that we have proper reference counting logic for urbs.  I nicked this
 *      from Greg KH's Visor driver.
 *
 * (23/Jun/2003) Ian Abbott
 *      Reduced flip buffer pushes and corrected a data length test in
 *      ftdi_read_bulk_callback.
 *      Defererence pointers after any paranoid checks, not before.
 *
 * (21/Jun/2003) Erik Nygren
 *      Added support for Home Electronics Tira-1 IR transceiver using FT232BM chip.
 *      See <http://www.home-electro.com/tira1.htm>.  Only operates properly
 *      at 100000 and RTS-CTS, so set custom divisor mode on startup.
 *      Also force the Tira-1 and USB-UIRT to only use their custom baud rates.
 *
 * (18/Jun/2003) Ian Abbott
 *      Added Device ID of the USB relais from Rudolf Gugler (backported from
 *      Philipp Gühring's patch for 2.5.x kernel).
 *      Moved read transfer buffer reallocation into startup function.
 *      Free existing write urb and transfer buffer in startup function.
 *      Only use urbs in write urb pool that were successfully allocated.
 *      Moved some constant macros out of functions.
 *      Minor whitespace and comment changes.
 *
 * (12/Jun/2003) David Norwood
 *      Added support for USB-UIRT IR transceiver using 8U232AM chip.
 *      See <http://home.earthlink.net/~jrhees/USBUIRT/index.htm>.  Only
 *      operates properly at 312500, so set custom divisor mode on startup.
 *
 * (12/Jun/2003) Ian Abbott
 *      Added Sealevel SeaLINK+ 210x, 220x, 240x, 280x vid/pids from Tuan Hoang
 *      - I've eliminated some that don't seem to exist!
 *      Added Home Electronics Tira-1 IR transceiver pid from Chris Horn
 *      Some whitespace/coding-style cleanups
 *
 * (11/Jun/2003) Ian Abbott
 *      Fixed unsafe spinlock usage in ftdi_write
 *
 * (24/Feb/2003) Richard Shooter
 *      Increase read buffer size to improve read speeds at higher baud rates
 *      (specifically tested with up to 1Mb/sec at 1.5M baud)
 *
 * (23/Feb/2003) John Wilkins
 *      Added Xon/xoff flow control (activating support in the ftdi device)
 *      Added vid/pid for Videonetworks/Homechoice (UK ISP)
 *
 * (23/Feb/2003) Bill Ryder
 *      Added matrix orb device vid/pids from Wayne Wylupski
 *
 * (19/Feb/2003) Ian Abbott
 *      For TIOCSSERIAL, set alt_speed to 0 when ASYNC_SPD_MASK value has
 *      changed to something other than ASYNC_SPD_HI, ASYNC_SPD_VHI,
 *      ASYNC_SPD_SHI or ASYNC_SPD_WARP.  Also, unless ASYNC_SPD_CUST is in
 *      force, don't bother changing baud rate when custom_divisor has changed.
 *
 * (18/Feb/2003) Ian Abbott
 *      Fixed TIOCMGET handling to include state of DTR and RTS, the state
 *      of which are now saved by set_dtr() and set_rts().
 *      Fixed improper storage class for buf in set_dtr() and set_rts().
 *      Added FT232BM chip type and support for its extra baud rates (compared
 *      to FT8U232AM).
 *      Took account of special case divisor values for highest baud rates of
 *      FT8U232AM and FT232BM.
 *      For TIOCSSERIAL, forced alt_speed to 0 when ASYNC_SPD_CUST kludge used,
 *      as previous alt_speed setting is now stale.
 *      Moved startup code common between the startup routines for the
 *      different chip types into a common subroutine.
 *
 * (17/Feb/2003) Bill Ryder
 *      Added write urb buffer pool on a per device basis
 *      Added more checking for open file on callbacks (fixed OOPS)
 *      Added CrystalFontz 632 and 634 PIDs
 *         (thanx to CrystalFontz for the sample devices - they flushed out
 *           some driver bugs)
 *      Minor debugging message changes
 *      Added throttle, unthrottle and chars_in_buffer functions
 *      Fixed FTDI_SIO (the original device) bug
 *      Fixed some shutdown handling
 *
 *
 *
 *
 * (07/Jun/2002) Kuba Ober
 *      Changed FTDI_SIO_BASE_BAUD_TO_DIVISOR macro into ftdi_baud_to_divisor
 *      function. It was getting too complex.
 *      Fix the divisor calculation logic which was setting divisor of 0.125
 *      instead of 0.5 for fractional parts of divisor equal to 5/8, 6/8, 7/8.
 *      Also make it bump up the divisor to next integer in case of 7/8 - it's
 *      a better approximation.
 *
 * (25/Jul/2002) Bill Ryder inserted Dmitri's TIOCMIWAIT patch
 *      Not tested by me but it doesn't break anything I use.
 *
 * (04/Jan/2002) Kuba Ober
 *      Implemented 38400 baudrate kludge, where it can be substituted with other
 *        values. That's the only way to set custom baudrates.
 *      Implemented TIOCSSERIAL, TIOCGSERIAL ioctl's so that setserial is happy.
 *      FIXME: both baudrate things should eventually go to usbserial.c as other
 *        devices may need that functionality too. Actually, it can probably be
 *        merged in serial.c somehow - too many drivers repeat this code over
 *        and over.
 *      Fixed baudrate forgetfulness - open() used to reset baudrate to 9600 every time.
 *      Divisors for baudrates are calculated by a macro.
 *      Small code cleanups. Ugly whitespace changes for Plato's sake only ;-].
 *
 * (04/Nov/2001) Bill Ryder
 *      Fixed bug in read_bulk_callback where incorrect urb buffer was used.
 *      Cleaned up write offset calculation
 *      Added write_room since default values can be incorrect for sio
 *      Changed write_bulk_callback to use same queue_task as other drivers
 *        (the previous version caused panics)
 *      Removed port iteration code since the device only has one I/O port and it
 *        was wrong anyway.
 *
 * (31/May/2001) gkh
 *      Switched from using spinlock to a semaphore, which fixes lots of problems.
 *
 * (23/May/2001)   Bill Ryder
 *      Added runtime debug patch (thanx Tyson D Sawyer).
 *      Cleaned up comments for 8U232
 *      Added parity, framing and overrun error handling
 *      Added receive break handling.
 *
 * (04/08/2001) gb
 *      Identify version on module load.
 *
 * (18/March/2001) Bill Ryder
 *      (Not released)
 *      Added send break handling. (requires kernel patch too)
 *      Fixed 8U232AM hardware RTS/CTS etc status reporting.
 *      Added flipbuf fix copied from generic device
 *
 * (12/3/2000) Bill Ryder
 *      Added support for 8U232AM device.
 *      Moved PID and VIDs into header file only.
 *      Turned on low-latency for the tty (device will do high baudrates)
 *      Added shutdown routine to close files when device removed.
 *      More debug and error message cleanups.
 *
 * (11/13/2000) Bill Ryder
 *      Added spinlock protected open code and close code.
 *      Multiple opens work (sort of - see webpage mentioned above).
 *      Cleaned up comments. Removed multiple PID/VID definitions.
 *      Factorised cts/dtr code
 *      Made use of __FUNCTION__ in dbg's
 *
 * (11/01/2000) Adam J. Richter
 *      usb_device_id table support
 *
 * (10/05/2000) gkh
 *      Fixed bug with urb->dev not being set properly, now that the usb
 *      core needs it.
 *
 * (09/11/2000) gkh
 *      Removed DEBUG #ifdefs with call to usb_serial_debug_data
 *
 * (07/19/2000) gkh
 *      Added module_init and module_exit functions to handle the fact that this
 *      driver is a loadable module now.
 *
 * (04/04/2000) Bill Ryder
 *      Fixed bugs in TCGET/TCSET ioctls (by removing them - they are
 *        handled elsewhere in the tty io driver chain).
 *
 * (03/30/2000) Bill Ryder
 *      Implemented lots of ioctls
 *      Fixed a race condition in write
 *      Changed some dbg's to errs
 *
 * (03/26/2000) gkh
 *      Split driver up into device specific pieces.
 *
 */

/* Bill Ryder - bryder@sgi.com - wrote the FTDI_SIO implementation */
/* Thanx to FTDI for so kindly providing details of the protocol required */
/*   to talk to the device */
/* Thanx to gkh and the rest of the usb dev group for all code I have assimilated :-) */

#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
#include <linux/serial.h>
#include <linux/usb/serial.h>
#include "ftdi_sio.h"

/*
 * Version Information
 */
#define DRIVER_VERSION "v1.4.3"
#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>"
#define DRIVER_DESC "USB FTDI Serial Converters Driver"

static int debug;
static __u16 vendor = FTDI_VID;
static __u16 product;

struct ftdi_private {
        ftdi_chip_type_t chip_type;
                                /* type of the device, either SIO or FT8U232AM */
        int baud_base;          /* baud base clock for divisor setting */
        int custom_divisor;     /* custom_divisor kludge, this is for baud_base (different from what goes to the chip!) */
        __u16 last_set_data_urb_value ;
                                /* the last data state set - needed for doing a break */
        int write_offset;       /* This is the offset in the usb data block to write the serial data -
                                 * it is different between devices
                                 */
        int flags;              /* some ASYNC_xxxx flags are supported */
        unsigned long last_dtr_rts;     /* saved modem control outputs */
        wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
        char prev_status, diff_status;        /* Used for TIOCMIWAIT */
        __u8 rx_flags;          /* receive state flags (throttling) */
        spinlock_t rx_lock;     /* spinlock for receive state */
        struct delayed_work rx_work;
        struct usb_serial_port *port;
        int rx_processed;
        unsigned long rx_bytes;

        __u16 interface;        /* FT2232C port interface (0 for FT232/245) */

        int force_baud;         /* if non-zero, force the baud rate to this value */
        int force_rtscts;       /* if non-zero, force RTS-CTS to always be enabled */

        spinlock_t tx_lock;     /* spinlock for transmit state */
        unsigned long tx_bytes;
        unsigned long tx_outstanding_bytes;
        unsigned long tx_outstanding_urbs;
};

/* struct ftdi_sio_quirk is used by devices requiring special attention. */
struct ftdi_sio_quirk {
        int (*probe)(struct usb_serial *);
        void (*port_probe)(struct ftdi_private *); /* Special settings for probed ports. */
};

static int   ftdi_olimex_probe          (struct usb_serial *serial);
static void  ftdi_USB_UIRT_setup        (struct ftdi_private *priv);
static void  ftdi_HE_TIRA1_setup        (struct ftdi_private *priv);

static struct ftdi_sio_quirk ftdi_olimex_quirk = {
        .probe  = ftdi_olimex_probe,
};

static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {
        .port_probe = ftdi_USB_UIRT_setup,
};

static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
        .port_probe = ftdi_HE_TIRA1_setup,
};

/*
 * The 8U232AM has the same API as the sio except for:
 * - it can support MUCH higher baudrates; up to:
 *   o 921600 for RS232 and 2000000 for RS422/485 at 48MHz
 *   o 230400 at 12MHz
 *   so .. 8U232AM's baudrate setting codes are different
 * - it has a two byte status code.
 * - it returns characters every 16ms (the FTDI does it every 40ms)
 *
 * the bcdDevice value is used to differentiate FT232BM and FT245BM from
 * the earlier FT8U232AM and FT8U232BM.  For now, include all known VID/PID
 * combinations in both tables.
 * FIXME: perhaps bcdDevice can also identify 12MHz FT8U232AM devices,
 * but I don't know if those ever went into mass production. [Ian Abbott]
 */



static struct usb_device_id id_table_combined [] = {
        { USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_IPLUS2_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_DMX4ALL) },
        { USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_232RL_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
        { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
        { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_XF_633_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_XF_631_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_XF_635_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_XF_640_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_XF_642_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_DSS20_PID) },
        { USB_DEVICE(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_VNHCPCUSB_D_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_MTXORB_0_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_MTXORB_1_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_MTXORB_2_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_MTXORB_3_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_USBX_707_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2101_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2102_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2103_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2104_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2106_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_1_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_2_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_1_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_2_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_1_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_2_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_1_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_2_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_3_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_4_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_1_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_2_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_3_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_4_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_1_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_2_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_3_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_4_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_1_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_2_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_3_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_4_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_5_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_6_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_7_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_8_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_1_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_2_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_3_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_4_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_5_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_6_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_7_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_8_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_1_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_2_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_3_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_4_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_5_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_6_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_7_PID) },
        { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) },
        { USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) },
        { USB_DEVICE(OCT_VID, OCT_US101_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_HE_TIRA1_PID),
                .driver_info = (kernel_ulong_t)&ftdi_HE_TIRA1_quirk },
        { USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID),
                .driver_info = (kernel_ulong_t)&ftdi_USB_UIRT_quirk },
        { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_1) },
        { USB_DEVICE(FTDI_VID, PROTEGO_R2X0) },
        { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_3) },
        { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_4) },
        { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E808_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E809_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80A_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80B_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80C_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80D_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80E_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80F_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E888_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E889_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88A_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88B_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88C_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88D_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88E_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88F_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_ELV_UR100_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_PYRAMID_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_IBS_US485_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_IBS_PICPRO_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_IBS_PCMCIA_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_IBS_PK1_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_IBS_RS232MON_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_IBS_APP70_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) },
        /*
         * These will probably use user-space drivers.  Uncomment them if
         * you need them or use the user-specified vendor/product module
         * parameters (see ftdi_sio.h for the numbers).  Make a fuss if
         * you think the driver should recognize any of them by default.
         */
        /* { USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) }, */
        /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) }, */
        /* { USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) }, */
        /* { USB_DEVICE(FTDI_VID, FTDI_ELV_UDF77_PID) }, */
        /* { USB_DEVICE(FTDI_VID, FTDI_ELV_UIO88_PID) }, */
        /* { USB_DEVICE(FTDI_VID, FTDI_ELV_UAD8_PID) }, */
        /* { USB_DEVICE(FTDI_VID, FTDI_ELV_UDA7_PID) }, */
        /* { USB_DEVICE(FTDI_VID, FTDI_ELV_USI2_PID) }, */
        /* { USB_DEVICE(FTDI_VID, FTDI_ELV_T1100_PID) }, */
        /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PCD200_PID) }, */
        /* { USB_DEVICE(FTDI_VID, FTDI_ELV_ULA200_PID) }, */
        /* { USB_DEVICE(FTDI_VID, FTDI_ELV_CSI8_PID) }, */
        /* { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1000DL_PID) }, */
        /* { USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) }, */
        /* { USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) }, */
        /* { USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) }, */
        /* { USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) }, */
        /* { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) }, */
        /* { USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) }, */
        { USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
        { USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
        { USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
        { USB_DEVICE(FTDI_VID, LINX_FUTURE_1_PID) },
        { USB_DEVICE(FTDI_VID, LINX_FUTURE_2_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_CCSMACHX_2_PID) },
        { USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) },
        { USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) },
        { USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) },
        { USB_DEVICE(FALCOM_VID, FALCOM_TWIST_PID) },
        { USB_DEVICE(FALCOM_VID, FALCOM_SAMBA_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_SUUNTO_SPORTS_PID) },
        { USB_DEVICE(TTI_VID, TTI_QL355P_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
        { USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
        { USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
        { USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) },
        { USB_DEVICE(FTDI_VID, EVER_ECO_PRO_CDS) },
        { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) },
        { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_0_PID) },
        { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_1_PID) },
        { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_2_PID) },
        { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_3_PID) },
        { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_4_PID) },
        { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_5_PID) },
        { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_6_PID) },
        { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) },
        { USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_MHAM_KW_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_MHAM_YS_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_MHAM_IC_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_MHAM_DB9_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_MHAM_RS232_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y9_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_VCP_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_D2XX_PID) },
        { USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
        { USB_DEVICE(EVOLUTION_VID, EVO_HYBRID_PID) },
        { USB_DEVICE(EVOLUTION_VID, EVO_RCM4_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HR_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HRC_PID) },
        { USB_DEVICE(KOBIL_VID, KOBIL_CONV_B1_PID) },
        { USB_DEVICE(KOBIL_VID, KOBIL_CONV_KAAN_PID) },
        { USB_DEVICE(POSIFLEX_VID, POSIFLEX_PP7000_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_TTUSB_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_ECLO_COM_1WIRE_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_777_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_8900F_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
        { USB_DEVICE(ICOM_ID1_VID, ICOM_ID1_PID) },
        { USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
        { USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_GAMMA_SCOUT_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13M_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) },
        { USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
        { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
        { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID),
                .driver_info = (kernel_ulong_t)&ftdi_olimex_quirk },
        { },                                    /* Optional parameter entry */
        { }                                     /* Terminating entry */
};

MODULE_DEVICE_TABLE (usb, id_table_combined);

static struct usb_driver ftdi_driver = {
        .name =         "ftdi_sio",
        .probe =        usb_serial_probe,
        .disconnect =   usb_serial_disconnect,
        .id_table =     id_table_combined,
        .no_dynamic_id =        1,
};

static const char *ftdi_chip_name[] = {
        [SIO] = "SIO",  /* the serial part of FT8U100AX */
        [FT8U232AM] = "FT8U232AM",
        [FT232BM] = "FT232BM",
        [FT2232C] = "FT2232C",
        [FT232RL] = "FT232RL",
};


/* Constants for read urb and write urb */
#define BUFSZ 512
#define PKTSZ 64

/* rx_flags */
#define THROTTLED               0x01
#define ACTUALLY_THROTTLED      0x02

/* Used for TIOCMIWAIT */
#define FTDI_STATUS_B0_MASK     (FTDI_RS0_CTS | FTDI_RS0_DSR | FTDI_RS0_RI | FTDI_RS0_RLSD)
#define FTDI_STATUS_B1_MASK     (FTDI_RS_BI)
/* End TIOCMIWAIT */

#define FTDI_IMPL_ASYNC_FLAGS = ( ASYNC_SPD_HI | ASYNC_SPD_VHI \
 ASYNC_SPD_CUST | ASYNC_SPD_SHI | ASYNC_SPD_WARP )

/* function prototypes for a FTDI serial converter */
static int  ftdi_sio_probe      (struct usb_serial *serial, const struct usb_device_id *id);
static void ftdi_shutdown               (struct usb_serial *serial);
static int  ftdi_sio_port_probe (struct usb_serial_port *port);
static int  ftdi_sio_port_remove        (struct usb_serial_port *port);
static int  ftdi_open                   (struct usb_serial_port *port, struct file *filp);
static void ftdi_close                  (struct usb_serial_port *port, struct file *filp);
static int  ftdi_write                  (struct usb_serial_port *port, const unsigned char *buf, int count);
static int  ftdi_write_room             (struct usb_serial_port *port);
static int  ftdi_chars_in_buffer        (struct usb_serial_port *port);
static void ftdi_write_bulk_callback    (struct urb *urb);
static void ftdi_read_bulk_callback     (struct urb *urb);
static void ftdi_process_read           (struct work_struct *work);
static void ftdi_set_termios            (struct usb_serial_port *port, struct ktermios * old);
static int  ftdi_tiocmget               (struct usb_serial_port *port, struct file *file);
static int  ftdi_tiocmset               (struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear);
static int  ftdi_ioctl                  (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
static void ftdi_break_ctl              (struct usb_serial_port *port, int break_state );
static void ftdi_throttle               (struct usb_serial_port *port);
static void ftdi_unthrottle             (struct usb_serial_port *port);

static unsigned short int ftdi_232am_baud_base_to_divisor (int baud, int base);
static unsigned short int ftdi_232am_baud_to_divisor (int baud);
static __u32 ftdi_232bm_baud_base_to_divisor (int baud, int base);
static __u32 ftdi_232bm_baud_to_divisor (int baud);

static struct usb_serial_driver ftdi_sio_device = {
        .driver = {
                .owner =        THIS_MODULE,
                .name =         "ftdi_sio",
        },
        .description =          "FTDI USB Serial Device",
        .usb_driver =           &ftdi_driver ,
        .id_table =             id_table_combined,
        .num_interrupt_in =     0,
        .num_bulk_in =          1,
        .num_bulk_out =         1,
        .num_ports =            1,
        .probe =                ftdi_sio_probe,
        .port_probe =           ftdi_sio_port_probe,
        .port_remove =          ftdi_sio_port_remove,
        .open =                 ftdi_open,
        .close =                ftdi_close,
        .throttle =             ftdi_throttle,
        .unthrottle =           ftdi_unthrottle,
        .write =                ftdi_write,
        .write_room =           ftdi_write_room,
        .chars_in_buffer =      ftdi_chars_in_buffer,
        .read_bulk_callback =   ftdi_read_bulk_callback,
        .write_bulk_callback =  ftdi_write_bulk_callback,
        .tiocmget =             ftdi_tiocmget,
        .tiocmset =             ftdi_tiocmset,
        .ioctl =                ftdi_ioctl,
        .set_termios =          ftdi_set_termios,
        .break_ctl =            ftdi_break_ctl,
        .shutdown =             ftdi_shutdown,
};


#define WDR_TIMEOUT 5000 /* default urb timeout */
#define WDR_SHORT_TIMEOUT 1000  /* shorter urb timeout */

/* High and low are for DTR, RTS etc etc */
#define HIGH 1
#define LOW 0

/* number of outstanding urbs to prevent userspace DoS from happening */
#define URB_UPPER_LIMIT 42

/*
 * ***************************************************************************
 * Utility functions
 * ***************************************************************************
 */

static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base)
{
        unsigned short int divisor;
        int divisor3 = base / 2 / baud; // divisor shifted 3 bits to the left
        if ((divisor3 & 0x7) == 7) divisor3 ++; // round x.7/8 up to x+1
        divisor = divisor3 >> 3;
        divisor3 &= 0x7;
        if (divisor3 == 1) divisor |= 0xc000; else // 0.125
        if (divisor3 >= 4) divisor |= 0x4000; else // 0.5
        if (divisor3 != 0) divisor |= 0x8000;      // 0.25
        if (divisor == 1) divisor = 0;  /* special case for maximum baud rate */
        return divisor;
}

static unsigned short int ftdi_232am_baud_to_divisor(int baud)
{
         return(ftdi_232am_baud_base_to_divisor(baud, 48000000));
}

static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base)
{
        static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
        __u32 divisor;
        int divisor3 = base / 2 / baud; // divisor shifted 3 bits to the left
        divisor = divisor3 >> 3;
        divisor |= (__u32)divfrac[divisor3 & 0x7] << 14;
        /* Deal with special cases for highest baud rates. */
        if (divisor == 1) divisor = 0; else     // 1.0
        if (divisor == 0x4001) divisor = 1;     // 1.5
        return divisor;
}

static __u32 ftdi_232bm_baud_to_divisor(int baud)
{
         return(ftdi_232bm_baud_base_to_divisor(baud, 48000000));
}

#define set_mctrl(port, set)            update_mctrl((port), (set), 0)
#define clear_mctrl(port, clear)        update_mctrl((port), 0, (clear))

static int update_mctrl(struct usb_serial_port *port, unsigned int set, unsigned int clear)
{
        struct ftdi_private *priv = usb_get_serial_port_data(port);
        char *buf;
        unsigned urb_value;
        int rv;

        if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
                dbg("%s - DTR|RTS not being set|cleared", __FUNCTION__);
                return 0;       /* no change */
        }

        buf = kmalloc(1, GFP_NOIO);
        if (!buf) {
                return -ENOMEM;
        }

        clear &= ~set;  /* 'set' takes precedence over 'clear' */
        urb_value = 0;
        if (clear & TIOCM_DTR)
                urb_value |= FTDI_SIO_SET_DTR_LOW;
        if (clear & TIOCM_RTS)
                urb_value |= FTDI_SIO_SET_RTS_LOW;
        if (set & TIOCM_DTR)
                urb_value |= FTDI_SIO_SET_DTR_HIGH;
        if (set & TIOCM_RTS)
                urb_value |= FTDI_SIO_SET_RTS_HIGH;
        rv = usb_control_msg(port->serial->dev,
                               usb_sndctrlpipe(port->serial->dev, 0),
                               FTDI_SIO_SET_MODEM_CTRL_REQUEST,
                               FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE,
                               urb_value, priv->interface,
                               buf, 0, WDR_TIMEOUT);

        kfree(buf);
        if (rv < 0) {
                err("%s Error from MODEM_CTRL urb: DTR %s, RTS %s",
                                __FUNCTION__,
                                (set & TIOCM_DTR) ? "HIGH" :
                                (clear & TIOCM_DTR) ? "LOW" : "unchanged",
                                (set & TIOCM_RTS) ? "HIGH" :
                                (clear & TIOCM_RTS) ? "LOW" : "unchanged");
        } else {
                dbg("%s - DTR %s, RTS %s", __FUNCTION__,
                                (set & TIOCM_DTR) ? "HIGH" :
                                (clear & TIOCM_DTR) ? "LOW" : "unchanged",
                                (set & TIOCM_RTS) ? "HIGH" :
                                (clear & TIOCM_RTS) ? "LOW" : "unchanged");
                priv->last_dtr_rts = (priv->last_dtr_rts & ~clear) | set;
        }
        return rv;
}


static __u32 get_ftdi_divisor(struct usb_serial_port * port);


static int change_speed(struct usb_serial_port *port)
{
        struct ftdi_private *priv = usb_get_serial_port_data(port);
        char *buf;
        __u16 urb_value;
        __u16 urb_index;
        __u32 urb_index_value;
        int rv;

        buf = kmalloc(1, GFP_NOIO);
        if (!buf)
                return -ENOMEM;

        urb_index_value = get_ftdi_divisor(port);
        urb_value = (__u16)urb_index_value;
        urb_index = (__u16)(urb_index_value >> 16);
        if (priv->interface) {  /* FT2232C */
                urb_index = (__u16)((urb_index << 8) | priv->interface);
        }

        rv = usb_control_msg(port->serial->dev,
                            usb_sndctrlpipe(port->serial->dev, 0),
                            FTDI_SIO_SET_BAUDRATE_REQUEST,
                            FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE,
                            urb_value, urb_index,
                            buf, 0, WDR_SHORT_TIMEOUT);

        kfree(buf);
        return rv;
}


static __u32 get_ftdi_divisor(struct usb_serial_port * port)
{ /* get_ftdi_divisor */
        struct ftdi_private *priv = usb_get_serial_port_data(port);
        __u32 div_value = 0;
        int div_okay = 1;
        int baud;

        /*
         * The logic involved in setting the baudrate can be cleanly split in 3 steps.
         * Obtaining the actual baud rate is a little tricky since unix traditionally
         * somehow ignored the possibility to set non-standard baud rates.
         * 1. Standard baud rates are set in tty->termios->c_cflag
         * 2. If these are not enough, you can set any speed using alt_speed as follows:
         *    - set tty->termios->c_cflag speed to B38400
         *    - set your real speed in tty->alt_speed; it gets ignored when
         *      alt_speed==0, (or)
         *    - call TIOCSSERIAL ioctl with (struct serial_struct) set as follows:
         *      flags & ASYNC_SPD_MASK == ASYNC_SPD_[HI, VHI, SHI, WARP], this just
         *      sets alt_speed to (HI: 57600, VHI: 115200, SHI: 230400, WARP: 460800)
         * ** Steps 1, 2 are done courtesy of tty_get_baud_rate
         * 3. You can also set baud rate by setting custom divisor as follows
         *    - set tty->termios->c_cflag speed to B38400
         *    - call TIOCSSERIAL ioctl with (struct serial_struct) set as follows:
         *      o flags & ASYNC_SPD_MASK == ASYNC_SPD_CUST
         *      o custom_divisor set to baud_base / your_new_baudrate
         * ** Step 3 is done courtesy of code borrowed from serial.c - I should really
         *    spend some time and separate+move this common code to serial.c, it is
         *    replicated in nearly every serial driver you see.
         */

        /* 1. Get the baud rate from the tty settings, this observes alt_speed hack */

        baud = tty_get_baud_rate(port->tty);
        dbg("%s - tty_get_baud_rate reports speed %d", __FUNCTION__, baud);

        /* 2. Observe async-compatible custom_divisor hack, update baudrate if needed */

        if (baud == 38400 &&
            ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
             (priv->custom_divisor)) {
                baud = priv->baud_base / priv->custom_divisor;
                dbg("%s - custom divisor %d sets baud rate to %d", __FUNCTION__, priv->custom_divisor, baud);
        }

        /* 3. Convert baudrate to device-specific divisor */

        if (!baud) baud = 9600;
        switch(priv->chip_type) {
        case SIO: /* SIO chip */
                switch(baud) {
                case 300: div_value = ftdi_sio_b300; break;
                case 600: div_value = ftdi_sio_b600; break;
                case 1200: div_value = ftdi_sio_b1200; break;
                case 2400: div_value = ftdi_sio_b2400; break;
                case 4800: div_value = ftdi_sio_b4800; break;
                case 9600: div_value = ftdi_sio_b9600; break;
                case 19200: div_value = ftdi_sio_b19200; break;
                case 38400: div_value = ftdi_sio_b38400; break;
                case 57600: div_value = ftdi_sio_b57600;  break;
                case 115200: div_value = ftdi_sio_b115200; break;
                } /* baud */
                if (div_value == 0) {
                        dbg("%s - Baudrate (%d) requested is not supported", __FUNCTION__,  baud);
                        div_value = ftdi_sio_b9600;
                        div_okay = 0;
                }
                break;
        case FT8U232AM: /* 8U232AM chip */
                if (baud <= 3000000) {
                        div_value = ftdi_232am_baud_to_divisor(baud);
                } else {
                        dbg("%s - Baud rate too high!", __FUNCTION__);
                        div_value = ftdi_232am_baud_to_divisor(9600);
                        div_okay = 0;
                }
                break;
        case FT232BM: /* FT232BM chip */
        case FT2232C: /* FT2232C chip */
        case FT232RL:
                if (baud <= 3000000) {
                        div_value = ftdi_232bm_baud_to_divisor(baud);
                } else {
                        dbg("%s - Baud rate too high!", __FUNCTION__);
                        div_value = ftdi_232bm_baud_to_divisor(9600);
                        div_okay = 0;
                }
                break;
        } /* priv->chip_type */

        if (div_okay) {
                dbg("%s - Baud rate set to %d (divisor 0x%lX) on chip %s",
                        __FUNCTION__, baud, (unsigned long)div_value,
                        ftdi_chip_name[priv->chip_type]);
        }

        return(div_value);
}


static int get_serial_info(struct usb_serial_port * port, struct serial_struct __user * retinfo)
{
        struct ftdi_private *priv = usb_get_serial_port_data(port);
        struct serial_struct tmp;

        if (!retinfo)
                return -EFAULT;
        memset(&tmp, 0, sizeof(tmp));
        tmp.flags = priv->flags;
        tmp.baud_base = priv->baud_base;
        tmp.custom_divisor = priv->custom_divisor;
        if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
                return -EFAULT;
        return 0;
} /* get_serial_info */


static int set_serial_info(struct usb_serial_port * port, struct serial_struct __user * newinfo)
{ /* set_serial_info */
        struct ftdi_private *priv = usb_get_serial_port_data(port);
        struct serial_struct new_serial;
        struct ftdi_private old_priv;

        if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
                return -EFAULT;
        old_priv = * priv;

        /* Do error checking and permission checking */

        if (!capable(CAP_SYS_ADMIN)) {
                if (((new_serial.flags & ~ASYNC_USR_MASK) !=
                     (priv->flags & ~ASYNC_USR_MASK)))
                        return -EPERM;
                priv->flags = ((priv->flags & ~ASYNC_USR_MASK) |
                               (new_serial.flags & ASYNC_USR_MASK));
                priv->custom_divisor = new_serial.custom_divisor;
                goto check_and_exit;
        }

        if ((new_serial.baud_base != priv->baud_base) &&
            (new_serial.baud_base < 9600))
                return -EINVAL;

        /* Make the changes - these are privileged changes! */

        priv->flags = ((priv->flags & ~ASYNC_FLAGS) |
                       (new_serial.flags & ASYNC_FLAGS));
        priv->custom_divisor = new_serial.custom_divisor;

        port->tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;

check_and_exit:
        if ((old_priv.flags & ASYNC_SPD_MASK) !=
             (priv->flags & ASYNC_SPD_MASK)) {
                if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
                        port->tty->alt_speed = 57600;
                else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
                        port->tty->alt_speed = 115200;
                else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
                        port->tty->alt_speed = 230400;
                else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
                        port->tty->alt_speed = 460800;
                else
                        port->tty->alt_speed = 0;
        }
        if (((old_priv.flags & ASYNC_SPD_MASK) !=
             (priv->flags & ASYNC_SPD_MASK)) ||
            (((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
             (old_priv.custom_divisor != priv->custom_divisor))) {
                change_speed(port);
        }

        return (0);

} /* set_serial_info */


/* Determine type of FTDI chip based on USB config and descriptor. */
static void ftdi_determine_type(struct usb_serial_port *port)
{
        struct ftdi_private *priv = usb_get_serial_port_data(port);
        struct usb_serial *serial = port->serial;
        struct usb_device *udev = serial->dev;
        unsigned version;
        unsigned interfaces;

        /* Assume it is not the original SIO device for now. */
        priv->baud_base = 48000000 / 2;
        priv->write_offset = 0;

        version = le16_to_cpu(udev->descriptor.bcdDevice);
        interfaces = udev->actconfig->desc.bNumInterfaces;
        dbg("%s: bcdDevice = 0x%x, bNumInterfaces = %u", __FUNCTION__,
                        version, interfaces);
        if (interfaces > 1) {
                int inter;

                /* Multiple interfaces.  Assume FT2232C. */
                priv->chip_type = FT2232C;
                /* Determine interface code. */
                inter = serial->interface->altsetting->desc.bInterfaceNumber;
                if (inter == 0) {
                        priv->interface = PIT_SIOA;
                } else {
                        priv->interface = PIT_SIOB;
                }
                /* BM-type devices have a bug where bcdDevice gets set
                 * to 0x200 when iSerialNumber is 0.  */
                if (version < 0x500) {
                        dbg("%s: something fishy - bcdDevice too low for multi-interface device",
                                        __FUNCTION__);
                }
        } else if (version < 0x200) {
                /* Old device.  Assume its the original SIO. */
                priv->chip_type = SIO;
                priv->baud_base = 12000000 / 16;
                priv->write_offset = 1;
        } else if (version < 0x400) {
                /* Assume its an FT8U232AM (or FT8U245AM) */
                /* (It might be a BM because of the iSerialNumber bug,
                 * but it will still work as an AM device.) */
                priv->chip_type = FT8U232AM;
        } else if (version < 0x600) {
                /* Assume its an FT232BM (or FT245BM) */
                priv->chip_type = FT232BM;
        } else {
                /* Assume its an FT232R  */
                priv->chip_type = FT232RL;
        }
        info("Detected %s", ftdi_chip_name[priv->chip_type]);
}


/*
 * ***************************************************************************
 * Sysfs Attribute
 * ***************************************************************************
 */

static ssize_t show_latency_timer(struct device *dev, struct device_attribute *attr, char *buf)
{
        struct usb_serial_port *port = to_usb_serial_port(dev);
        struct ftdi_private *priv = usb_get_serial_port_data(port);
        struct usb_device *udev = port->serial->dev;
        unsigned short latency = 0;
        int rv = 0;


        dbg("%s",__FUNCTION__);

        rv = usb_control_msg(udev,
                             usb_rcvctrlpipe(udev, 0),
                             FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
                             FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
                             0, priv->interface,
                             (char*) &latency, 1, WDR_TIMEOUT);

        if (rv < 0) {
                dev_err(dev, "Unable to read latency timer: %i", rv);
                return -EIO;
        }
        return sprintf(buf, "%i\n", latency);
}

/* Write a new value of the latency timer, in units of milliseconds. */
static ssize_t store_latency_timer(struct device *dev, struct device_attribute *attr, const char *valbuf,
                                   size_t count)
{
        struct usb_serial_port *port = to_usb_serial_port(dev);
        struct ftdi_private *priv = usb_get_serial_port_data(port);
        struct usb_device *udev = port->serial->dev;
        char buf[1];
        int v = simple_strtoul(valbuf, NULL, 10);
        int rv = 0;

        dbg("%s: setting latency timer = %i", __FUNCTION__, v);

        rv = usb_control_msg(udev,
                             usb_sndctrlpipe(udev, 0),
                             FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
                             FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
                             v, priv->interface,
                             buf, 0, WDR_TIMEOUT);

        if (rv < 0) {
                dev_err(dev, "Unable to write latency timer: %i", rv);
                return -EIO;
        }

        return count;
}

/* Write an event character directly to the FTDI register.  The ASCII
   value is in the low 8 bits, with the enable bit in the 9th bit. */
static ssize_t store_event_char(struct device *dev, struct device_attribute *attr, const char *valbuf,
                                size_t count)
{
        struct usb_serial_port *port = to_usb_serial_port(dev);
        struct ftdi_private *priv = usb_get_serial_port_data(port);
        struct usb_device *udev = port->serial->dev;
        char buf[1];
        int v = simple_strtoul(valbuf, NULL, 10);
        int rv = 0;

        dbg("%s: setting event char = %i", __FUNCTION__, v);

        rv = usb_control_msg(udev,
                             usb_sndctrlpipe(udev, 0),
                             FTDI_SIO_SET_EVENT_CHAR_REQUEST,
                             FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE,
                             v, priv->interface,
                             buf, 0, WDR_TIMEOUT);

        if (rv < 0) {
                dbg("Unable to write event character: %i", rv);
                return -EIO;
        }

        return count;
}

static DEVICE_ATTR(latency_timer, S_IWUSR | S_IRUGO, show_latency_timer, store_latency_timer);
static DEVICE_ATTR(event_char, S_IWUSR, NULL, store_event_char);

static int create_sysfs_attrs(struct usb_serial_port *port)
{
        struct ftdi_private *priv = usb_get_serial_port_data(port);
        int retval = 0;

        dbg("%s",__FUNCTION__);

        /* XXX I've no idea if the original SIO supports the event_char
         * sysfs parameter, so I'm playing it safe.  */
        if (priv->chip_type != SIO) {
                dbg("sysfs attributes for %s", ftdi_chip_name[priv->chip_type]);
                retval = device_create_file(&port->dev, &dev_attr_event_char);
                if ((!retval) &&
                    (priv->chip_type == FT232BM ||
                     priv->chip_type == FT2232C ||
                     priv->chip_type == FT232RL)) {
                        retval = device_create_file(&port->dev,
                                                    &dev_attr_latency_timer);
                }
        }
        return retval;
}

static void remove_sysfs_attrs(struct usb_serial_port *port)
{
        struct ftdi_private *priv = usb_get_serial_port_data(port);

        dbg("%s",__FUNCTION__);

        /* XXX see create_sysfs_attrs */
        if (priv->chip_type != SIO) {
                device_remove_file(&port->dev, &dev_attr_event_char);
                if (priv->chip_type == FT232BM || priv->chip_type == FT2232C) {
                        device_remove_file(&port->dev, &dev_attr_latency_timer);
                }
        }

}

/*
 * ***************************************************************************
 * FTDI driver specific functions
 * ***************************************************************************
 */

/* Probe function to check for special devices */
static int ftdi_sio_probe (struct usb_serial *serial, const struct usb_device_id *id)
{
        struct ftdi_sio_quirk *quirk = (struct ftdi_sio_quirk *)id->driver_info;

        if (quirk && quirk->probe) {
                int ret = quirk->probe(serial);
                if (ret != 0)
                        return ret;
        }

        usb_set_serial_data(serial, (void *)id->driver_info);

        return 0;
}

static int ftdi_sio_port_probe(struct usb_serial_port *port)
{
        struct ftdi_private *priv;
        struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial);


        dbg("%s",__FUNCTION__);

        priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);
        if (!priv){
                err("%s- kmalloc(%Zd) failed.", __FUNCTION__, sizeof(struct ftdi_private));
                return -ENOMEM;
        }

        spin_lock_init(&priv->rx_lock);
        spin_lock_init(&priv->tx_lock);
        init_waitqueue_head(&priv->delta_msr_wait);
        /* This will push the characters through immediately rather
           than queue a task to deliver them */
        priv->flags = ASYNC_LOW_LATENCY;

        if (quirk && quirk->port_probe)
                quirk->port_probe(priv);

        /* Increase the size of read buffers */
        kfree(port->bulk_in_buffer);
        port->bulk_in_buffer = kmalloc (BUFSZ, GFP_KERNEL);
        if (!port->bulk_in_buffer) {
                kfree (priv);
                return -ENOMEM;
        }
        if (port->read_urb) {
                port->read_urb->transfer_buffer = port->bulk_in_buffer;
                port->read_urb->transfer_buffer_length = BUFSZ;
        }

        INIT_DELAYED_WORK(&priv->rx_work, ftdi_process_read);
        priv->port = port;

        /* Free port's existing write urb and transfer buffer. */
        if (port->write_urb) {
                usb_free_urb (port->write_urb);
                port->write_urb = NULL;
        }
        kfree(port->bulk_out_buffer);
        port->bulk_out_buffer = NULL;

        usb_set_serial_port_data(port, priv);

        ftdi_determine_type (port);
        create_sysfs_attrs(port);
        return 0;
}

/* Setup for the USB-UIRT device, which requires hardwired
 * baudrate (38400 gets mapped to 312500) */
/* Called from usbserial:serial_probe */
static void ftdi_USB_UIRT_setup (struct ftdi_private *priv)
{
        dbg("%s",__FUNCTION__);

        priv->flags |= ASYNC_SPD_CUST;
        priv->custom_divisor = 77;
        priv->force_baud = B38400;
} /* ftdi_USB_UIRT_setup */

/* Setup for the HE-TIRA1 device, which requires hardwired
 * baudrate (38400 gets mapped to 100000) and RTS-CTS enabled.  */
static void ftdi_HE_TIRA1_setup (struct ftdi_private *priv)
{
        dbg("%s",__FUNCTION__);

        priv->flags |= ASYNC_SPD_CUST;
        priv->custom_divisor = 240;
        priv->force_baud = B38400;
        priv->force_rtscts = 1;
} /* ftdi_HE_TIRA1_setup */

/*
 * First port on Olimex arm-usb-ocd is reserved for JTAG interface
 * and can be accessed from userspace using openocd.
 */
static int ftdi_olimex_probe(struct usb_serial *serial)
{
        struct usb_device *udev = serial->dev;
        struct usb_interface *interface = serial->interface;

        dbg("%s",__FUNCTION__);

        if (interface == udev->actconfig->interface[0]) {
                info("Ignoring reserved serial port on Olimex arm-usb-ocd\n");
                return -ENODEV;
        }

        return 0;
}

/* ftdi_shutdown is called from usbserial:usb_serial_disconnect
 *   it is called when the usb device is disconnected
 *
 *   usbserial:usb_serial_disconnect
 *      calls __serial_close for each open of the port
 *      shutdown is called then (ie ftdi_shutdown)
 */
static void ftdi_shutdown (struct usb_serial *serial)
{
        dbg("%s", __FUNCTION__);
}

static int ftdi_sio_port_remove(struct usb_serial_port *port)
{
        struct ftdi_private *priv = usb_get_serial_port_data(port);

        dbg("%s", __FUNCTION__);

        remove_sysfs_attrs(port);

        /* all open ports are closed at this point
         *    (by usbserial.c:__serial_close, which calls ftdi_close)
         */

        if (priv) {
                usb_set_serial_port_data(port, NULL);
                kfree(priv);
        }

        return 0;
}

static int  ftdi_open (struct usb_serial_port *port, struct file *filp)
{ /* ftdi_open */
        struct usb_device *dev = port->serial->dev;
        struct ftdi_private *priv = usb_get_serial_port_data(port);
        unsigned long flags;

        int result = 0;
        char buf[1]; /* Needed for the usb_control_msg I think */

        dbg("%s", __FUNCTION__);

        spin_lock_irqsave(&priv->tx_lock, flags);
        priv->tx_bytes = 0;
        spin_unlock_irqrestore(&priv->tx_lock, flags);
        spin_lock_irqsave(&priv->rx_lock, flags);
        priv->rx_bytes = 0;
        spin_unlock_irqrestore(&priv->rx_lock, flags);

        if (port->tty)
                port->tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;

        /* No error checking for this (will get errors later anyway) */
        /* See ftdi_sio.h for description of what is reset */
        usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
                        FTDI_SIO_RESET_REQUEST, FTDI_SIO_RESET_REQUEST_TYPE,
                        FTDI_SIO_RESET_SIO,
                        priv->interface, buf, 0, WDR_TIMEOUT);

        /* Termios defaults are set by usb_serial_init. We don't change
           port->tty->termios - this would loose speed settings, etc.
           This is same behaviour as serial.c/rs_open() - Kuba */

        /* ftdi_set_termios  will send usb control messages */
        if (port->tty)
                ftdi_set_termios(port, NULL);

        /* FIXME: Flow control might be enabled, so it should be checked -
           we have no control of defaults! */
        /* Turn on RTS and DTR since we are not flow controlling by default */
        set_mctrl(port, TIOCM_DTR | TIOCM_RTS);

        /* Not throttled */
        spin_lock_irqsave(&priv->rx_lock, flags);
        priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
        spin_unlock_irqrestore(&priv->rx_lock, flags);

        /* Start reading from the device */
        priv->rx_processed = 0;
        usb_fill_bulk_urb(port->read_urb, dev,
                      usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress),
                      port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
                      ftdi_read_bulk_callback, port);
        result = usb_submit_urb(port->read_urb, GFP_KERNEL);
        if (result)
                err("%s - failed submitting read urb, error %d", __FUNCTION__, result);


        return result;
} /* ftdi_open */



/*
 * usbserial:__serial_close  only calls ftdi_close if the point is open
 *
 *   This only gets called when it is the last close
 *
 *
 */

static void ftdi_close (struct usb_serial_port *port, struct file *filp)
{ /* ftdi_close */
        unsigned int c_cflag = port->tty->termios->c_cflag;
        struct ftdi_private *priv = usb_get_serial_port_data(port);
        char buf[1];

        dbg("%s", __FUNCTION__);

        if (c_cflag & HUPCL){
                /* Disable flow control */
                if (usb_control_msg(port->serial->dev,
                                    usb_sndctrlpipe(port->serial->dev, 0),
                                    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
                                    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
                                    0, priv->interface, buf, 0,
                                    WDR_TIMEOUT) < 0) {
                        err("error from flowcontrol urb");
                }

                /* drop RTS and DTR */
                clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
        } /* Note change no line if hupcl is off */

        /* cancel any scheduled reading */
        cancel_delayed_work(&priv->rx_work);
        flush_scheduled_work();

        /* shutdown our bulk read */
        usb_kill_urb(port->read_urb);
} /* ftdi_close */



/* The SIO requires the first byte to have:
 *  B0 1
 *  B1 0
 *  B2..7 length of message excluding byte 0
 *
 * The new devices do not require this byte
 */
static int ftdi_write (struct usb_serial_port *port,
                           const unsigned char *buf, int count)
{ /* ftdi_write */
        struct ftdi_private *priv = usb_get_serial_port_data(port);
        struct urb *urb;
        unsigned char *buffer;
        int data_offset ;       /* will be 1 for the SIO and 0 otherwise */
        int status;
        int transfer_size;
        unsigned long flags;

        dbg("%s port %d, %d bytes", __FUNCTION__, port->number, count);

        if (count == 0) {
                dbg("write request of 0 bytes");
                return 0;
        }
        spin_lock_irqsave(&priv->tx_lock, flags);
        if (priv->tx_outstanding_urbs > URB_UPPER_LIMIT) {
                spin_unlock_irqrestore(&priv->tx_lock, flags);
                dbg("%s - write limit hit\n", __FUNCTION__);
                return 0;
        }
        priv->tx_outstanding_urbs++;
        spin_unlock_irqrestore(&priv->tx_lock, flags);

        data_offset = priv->write_offset;
        dbg("data_offset set to %d",data_offset);

        /* Determine total transfer size */
        transfer_size = count;
        if (data_offset > 0) {
                /* Original sio needs control bytes too... */
                transfer_size += (data_offset *
                                ((count + (PKTSZ - 1 - data_offset)) /
                                 (PKTSZ - data_offset)));
        }

        buffer = kmalloc (transfer_size, GFP_ATOMIC);
        if (!buffer) {
                err("%s ran out of kernel memory for urb ...", __FUNCTION__);
                count = -ENOMEM;
                goto error_no_buffer;
        }

        urb = usb_alloc_urb(0, GFP_ATOMIC);
        if (!urb) {
                err("%s - no more free urbs", __FUNCTION__);
                count = -ENOMEM;
                goto error_no_urb;
        }

        /* Copy data */
        if (data_offset > 0) {
                /* Original sio requires control byte at start of each packet. */
                int user_pktsz = PKTSZ - data_offset;
                int todo = count;
                unsigned char *first_byte = buffer;
                const unsigned char *current_position = buf;

                while (todo > 0) {
                        if (user_pktsz > todo) {
                                user_pktsz = todo;
                        }
                        /* Write the control byte at the front of the packet*/
                        *first_byte = 1 | ((user_pktsz) << 2);
                        /* Copy data for packet */
                        memcpy (first_byte + data_offset,
                                current_position, user_pktsz);
                        first_byte += user_pktsz + data_offset;
                        current_position += user_pktsz;
                        todo -= user_pktsz;
                }
        } else {
                /* No control byte required. */
                /* Copy in the data to send */
                memcpy (buffer, buf, count);
        }

        usb_serial_debug_data(debug, &port->dev, __FUNCTION__, transfer_size, buffer);

        /* fill the buffer and send it */
        usb_fill_bulk_urb(urb, port->serial->dev,
                      usb_sndbulkpipe(port->serial->dev, port->bulk_out_endpointAddress),
                      buffer, transfer_size,
                      ftdi_write_bulk_callback, port);

        status = usb_submit_urb(urb, GFP_ATOMIC);
        if (status) {
                err("%s - failed submitting write urb, error %d", __FUNCTION__, status);
                count = status;
                goto error;
        } else {
                spin_lock_irqsave(&priv->tx_lock, flags);
                priv->tx_outstanding_bytes += count;
                priv->tx_bytes += count;
                spin_unlock_irqrestore(&priv->tx_lock, flags);
        }

        /* we are done with this urb, so let the host driver
         * really free it when it is finished with it */
        usb_free_urb(urb);

        dbg("%s write returning: %d", __FUNCTION__, count);
        return count;
error:
        usb_free_urb(urb);
error_no_urb:
        kfree (buffer);
error_no_buffer:
        spin_lock_irqsave(&priv->tx_lock, flags);
        priv->tx_outstanding_urbs--;
        spin_unlock_irqrestore(&priv->tx_lock, flags);
        return count;
} /* ftdi_write */


/* This function may get called when the device is closed */

static void ftdi_write_bulk_callback (struct urb *urb)
{
        unsigned long flags;
        struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
        struct ftdi_private *priv;
        int data_offset;       /* will be 1 for the SIO and 0 otherwise */
        unsigned long countback;
        int status = urb->status;

        /* free up the transfer buffer, as usb_free_urb() does not do this */
        kfree (urb->transfer_buffer);

        dbg("%s - port %d", __FUNCTION__, port->number);

        if (status) {
                dbg("nonzero write bulk status received: %d", status);
                return;
        }

        priv = usb_get_serial_port_data(port);
        if (!priv) {
                dbg("%s - bad port private data pointer - exiting", __FUNCTION__);
                return;
        }
        /* account for transferred data */
        countback = urb->actual_length;
        data_offset = priv->write_offset;
        if (data_offset > 0) {
                /* Subtract the control bytes */
                countback -= (data_offset * ((countback + (PKTSZ - 1)) / PKTSZ));
        }
        spin_lock_irqsave(&priv->tx_lock, flags);
        --priv->tx_outstanding_urbs;
        priv->tx_outstanding_bytes -= countback;
        spin_unlock_irqrestore(&priv->tx_lock, flags);

        usb_serial_port_softint(port);
} /* ftdi_write_bulk_callback */


static int ftdi_write_room( struct usb_serial_port *port )
{
        struct ftdi_private *priv = usb_get_serial_port_data(port);
        int room;
        unsigned long flags;

        dbg("%s - port %d", __FUNCTION__, port->number);

        spin_lock_irqsave(&priv->tx_lock, flags);
        if (priv->tx_outstanding_urbs < URB_UPPER_LIMIT) {
                /*
                 * We really can take anything the user throws at us
                 * but let's pick a nice big number to tell the tty
                 * layer that we have lots of free space
                 */
                room = 2048;
        } else {
                room = 0;
        }
        spin_unlock_irqrestore(&priv->tx_lock, flags);
        return room;
} /* ftdi_write_room */


static int ftdi_chars_in_buffer (struct usb_serial_port *port)
{ /* ftdi_chars_in_buffer */
        struct ftdi_private *priv = usb_get_serial_port_data(port);
        int buffered;
        unsigned long flags;

        dbg("%s - port %d", __FUNCTION__, port->number);

        spin_lock_irqsave(&priv->tx_lock, flags);
        buffered = (int)priv->tx_outstanding_bytes;
        spin_unlock_irqrestore(&priv->tx_lock, flags);
        if (buffered < 0) {
                err("%s outstanding tx bytes is negative!", __FUNCTION__);
                buffered = 0;
        }
        return buffered;
} /* ftdi_chars_in_buffer */



static void ftdi_read_bulk_callback (struct urb *urb)
{ /* ftdi_read_bulk_callback */
        struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
        struct tty_struct *tty;
        struct ftdi_private *priv;
        unsigned long countread;
        unsigned long flags;
        int status = urb->status;

        if (urb->number_of_packets > 0) {
                err("%s transfer_buffer_length %d actual_length %d number of packets %d",__FUNCTION__,
                    urb->transfer_buffer_length, urb->actual_length, urb->number_of_packets );
                err("%s transfer_flags %x ", __FUNCTION__,urb->transfer_flags );
        }

        dbg("%s - port %d", __FUNCTION__, port->number);

        if (port->open_count <= 0)
                return;

        tty = port->tty;
        if (!tty) {
                dbg("%s - bad tty pointer - exiting",__FUNCTION__);
                return;
        }

        priv = usb_get_serial_port_data(port);
        if (!priv) {
                dbg("%s - bad port private data pointer - exiting", __FUNCTION__);
                return;
        }

        if (urb != port->read_urb) {
                err("%s - Not my urb!", __FUNCTION__);
        }

        if (status) {
                /* This will happen at close every time so it is a dbg not an err */
                dbg("(this is ok on close) nonzero read bulk status received: "
                    "%d", status);
                return;
        }

        /* count data bytes, but not status bytes */
        countread = urb->actual_length;
        countread -= 2 * ((countread + (PKTSZ - 1)) / PKTSZ);
        spin_lock_irqsave(&priv->rx_lock, flags);
        priv->rx_bytes += countread;
        spin_unlock_irqrestore(&priv->rx_lock, flags);

        ftdi_process_read(&priv->rx_work.work);

} /* ftdi_read_bulk_callback */


static void ftdi_process_read (struct work_struct *work)
{ /* ftdi_process_read */
        struct ftdi_private *priv =
                container_of(work, struct ftdi_private, rx_work.work);
        struct usb_serial_port *port = priv->port;
        struct urb *urb;
        struct tty_struct *tty;
        char error_flag;
        unsigned char *data;

        int i;
        int result;
        int need_flip;
        int packet_offset;
        unsigned long flags;

        dbg("%s - port %d", __FUNCTION__, port->number);

        if (port->open_count <= 0)
                return;

        tty = port->tty;
        if (!tty) {
                dbg("%s - bad tty pointer - exiting",__FUNCTION__);
                return;
        }

        priv = usb_get_serial_port_data(port);
        if (!priv) {
                dbg("%s - bad port private data pointer - exiting", __FUNCTION__);
                return;
        }

        urb = port->read_urb;
        if (!urb) {
                dbg("%s - bad read_urb pointer - exiting", __FUNCTION__);
                return;
        }

        data = urb->transfer_buffer;

        if (priv->rx_processed) {
                dbg("%s - already processed: %d bytes, %d remain", __FUNCTION__,
                                priv->rx_processed,
                                urb->actual_length - priv->rx_processed);
        } else {
                /* The first two bytes of every read packet are status */
                if (urb->actual_length > 2) {
                        usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
                } else {
                        dbg("Status only: %03oo %03oo",data[0],data[1]);
                }
        }


        /* TO DO -- check for hung up line and handle appropriately: */
        /*   send hangup  */
        /* See acm.c - you do a tty_hangup  - eg tty_hangup(tty) */
        /* if CD is dropped and the line is not CLOCAL then we should hangup */

        need_flip = 0;
        for (packet_offset = priv->rx_processed; packet_offset < urb->actual_length; packet_offset += PKTSZ) {
                int length;

                /* Compare new line status to the old one, signal if different */
                /* N.B. packet may be processed more than once, but differences
                 * are only processed once.  */
                if (priv != NULL) {
                        char new_status = data[packet_offset+0] & FTDI_STATUS_B0_MASK;
                        if (new_status != priv->prev_status) {
                                priv->diff_status |= new_status ^ priv->prev_status;
                                wake_up_interruptible(&priv->delta_msr_wait);
                                priv->prev_status = new_status;
                        }
                }

                length = min(PKTSZ, urb->actual_length-packet_offset)-2;
                if (length < 0) {
                        err("%s - bad packet length: %d", __FUNCTION__, length+2);
                        length = 0;
                }

                if (priv->rx_flags & THROTTLED) {
                        dbg("%s - throttled", __FUNCTION__);
                        break;
                }
                if (tty_buffer_request_room(tty, length) < length) {
                        /* break out & wait for throttling/unthrottling to happen */
                        dbg("%s - receive room low", __FUNCTION__);
                        break;
                }

                /* Handle errors and break */
                error_flag = TTY_NORMAL;
                /* Although the device uses a bitmask and hence can have multiple */
                /* errors on a packet - the order here sets the priority the */
                /* error is returned to the tty layer  */

                if ( data[packet_offset+1] & FTDI_RS_OE ) {
                        error_flag = TTY_OVERRUN;
                        dbg("OVERRRUN error");
                }
                if ( data[packet_offset+1] & FTDI_RS_BI ) {
                        error_flag = TTY_BREAK;
                        dbg("BREAK received");
                }
                if ( data[packet_offset+1] & FTDI_RS_PE ) {
                        error_flag = TTY_PARITY;
                        dbg("PARITY error");
                }
                if ( data[packet_offset+1] & FTDI_RS_FE ) {
                        error_flag = TTY_FRAME;
                        dbg("FRAMING error");
                }
                if (length > 0) {
                        for (i = 2; i < length+2; i++) {
                                /* Note that the error flag is duplicated for
                                   every character received since we don't know
                                   which character it applied to */
                                tty_insert_flip_char(tty, data[packet_offset+i], error_flag);
                        }
                        need_flip = 1;
                }

#ifdef NOT_CORRECT_BUT_KEEPING_IT_FOR_NOW
                /* if a parity error is detected you get status packets forever
                   until a character is sent without a parity error.
                   This doesn't work well since the application receives a never
                   ending stream of bad data - even though new data hasn't been sent.
                   Therefore I (bill) have taken this out.
                   However - this might make sense for framing errors and so on
                   so I am leaving the code in for now.
                */
                else {
                        if (error_flag != TTY_NORMAL){
                                dbg("error_flag is not normal");
                                /* In this case it is just status - if that is an error send a bad character */
                                if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
                                        tty_flip_buffer_push(tty);
                                }
                                tty_insert_flip_char(tty, 0xff, error_flag);
                                need_flip = 1;
                        }
                }
#endif
        } /* "for(packet_offset=0..." */

        /* Low latency */
        if (need_flip) {
                tty_flip_buffer_push(tty);
        }

        if (packet_offset < urb->actual_length) {
                /* not completely processed - record progress */
                priv->rx_processed = packet_offset;
                dbg("%s - incomplete, %d bytes processed, %d remain",
                                __FUNCTION__, packet_offset,
                                urb->actual_length - packet_offset);
                /* check if we were throttled while processing */
                spin_lock_irqsave(&priv->rx_lock, flags);
                if (priv->rx_flags & THROTTLED) {
                        priv->rx_flags |= ACTUALLY_THROTTLED;
                        spin_unlock_irqrestore(&priv->rx_lock, flags);
                        dbg("%s - deferring remainder until unthrottled",
                                        __FUNCTION__);
                        return;
                }
                spin_unlock_irqrestore(&priv->rx_lock, flags);
                /* if the port is closed stop trying to read */
                if (port->open_count > 0){
                        /* delay processing of remainder */
                        schedule_delayed_work(&priv->rx_work, 1);
                } else {
                        dbg("%s - port is closed", __FUNCTION__);
                }
                return;
        }

        /* urb is completely processed */
        priv->rx_processed = 0;

        /* if the port is closed stop trying to read */
        if (port->open_count > 0){
                /* Continue trying to always read  */
                usb_fill_bulk_urb(port->read_urb, port->serial->dev,
                              usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress),
                              port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
                              ftdi_read_bulk_callback, port);

                result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
                if (result)
                        err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result);
        }

        return;
} /* ftdi_process_read */


static void ftdi_break_ctl( struct usb_serial_port *port, int break_state )
{
        struct ftdi_private *priv = usb_get_serial_port_data(port);
        __u16 urb_value = 0;
        char buf[1];

        /* break_state = -1 to turn on break, and 0 to turn off break */
        /* see drivers/char/tty_io.c to see it used */
        /* last_set_data_urb_value NEVER has the break bit set in it */

        if (break_state) {
                urb_value = priv->last_set_data_urb_value | FTDI_SIO_SET_BREAK;
        } else {
                urb_value = priv->last_set_data_urb_value;
        }


        if (usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0),
                            FTDI_SIO_SET_DATA_REQUEST,
                            FTDI_SIO_SET_DATA_REQUEST_TYPE,
                            urb_value , priv->interface,
                            buf, 0, WDR_TIMEOUT) < 0) {
                err("%s FAILED to enable/disable break state (state was %d)", __FUNCTION__,break_state);
        }

        dbg("%s break state is %d - urb is %d", __FUNCTION__,break_state, urb_value);

}


/* old_termios contains the original termios settings and tty->termios contains
 * the new setting to be used
 * WARNING: set_termios calls this with old_termios in kernel space
 */

static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
{ /* ftdi_termios */
        struct usb_device *dev = port->serial->dev;
        unsigned int cflag = port->tty->termios->c_cflag;
        struct ftdi_private *priv = usb_get_serial_port_data(port);
        __u16 urb_value; /* will hold the new flags */
        char buf[1]; /* Perhaps I should dynamically alloc this? */

        // Added for xon/xoff support
        unsigned int iflag = port->tty->termios->c_iflag;
        unsigned char vstop;
        unsigned char vstart;

        dbg("%s", __FUNCTION__);

        /* Force baud rate if this device requires it, unless it is set to B0. */
        if (priv->force_baud && ((port->tty->termios->c_cflag & CBAUD) != B0)) {
                dbg("%s: forcing baud rate for this device", __FUNCTION__);
                port->tty->termios->c_cflag &= ~CBAUD;
                port->tty->termios->c_cflag |= priv->force_baud;
        }

        /* Force RTS-CTS if this device requires it. */
        if (priv->force_rtscts) {
                dbg("%s: forcing rtscts for this device", __FUNCTION__);
                port->tty->termios->c_cflag |= CRTSCTS;
        }

        cflag = port->tty->termios->c_cflag;

        /* FIXME -For this cut I don't care if the line is really changing or
           not  - so just do the change regardless  - should be able to
           compare old_termios and tty->termios */
        /* NOTE These routines can get interrupted by
           ftdi_sio_read_bulk_callback  - need to examine what this
           means - don't see any problems yet */

        /* Set number of data bits, parity, stop bits */

        urb_value = 0;
        urb_value |= (cflag & CSTOPB ? FTDI_SIO_SET_DATA_STOP_BITS_2 :
                      FTDI_SIO_SET_DATA_STOP_BITS_1);
        urb_value |= (cflag & PARENB ?
                      (cflag & PARODD ? FTDI_SIO_SET_DATA_PARITY_ODD :
                       FTDI_SIO_SET_DATA_PARITY_EVEN) :
                      FTDI_SIO_SET_DATA_PARITY_NONE);
        if (cflag & CSIZE) {
                switch (cflag & CSIZE) {
                case CS5: urb_value |= 5; dbg("Setting CS5"); break;
                case CS6: urb_value |= 6; dbg("Setting CS6"); break;
                case CS7: urb_value |= 7; dbg("Setting CS7"); break;
                case CS8: urb_value |= 8; dbg("Setting CS8"); break;
                default:
                        err("CSIZE was set but not CS5-CS8");
                }
        }

        /* This is needed by the break command since it uses the same command - but is
         *  or'ed with this value  */
        priv->last_set_data_urb_value = urb_value;

        if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
                            FTDI_SIO_SET_DATA_REQUEST,
                            FTDI_SIO_SET_DATA_REQUEST_TYPE,
                            urb_value , priv->interface,
                            buf, 0, WDR_SHORT_TIMEOUT) < 0) {
                err("%s FAILED to set databits/stopbits/parity", __FUNCTION__);
        }

        /* Now do the baudrate */
        if ((cflag & CBAUD) == B0 ) {
                /* Disable flow control */
                if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
                                    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
                                    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
                                    0, priv->interface,
                                    buf, 0, WDR_TIMEOUT) < 0) {
                        err("%s error from disable flowcontrol urb", __FUNCTION__);
                }
                /* Drop RTS and DTR */
                clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
        } else {
                /* set the baudrate determined before */
                if (change_speed(port)) {
                        err("%s urb failed to set baudrate", __FUNCTION__);
                }
                /* Ensure RTS and DTR are raised when baudrate changed from 0 */
                if (!old_termios || (old_termios->c_cflag & CBAUD) == B0) {
                        set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
                }
        }

        /* Set flow control */
        /* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */
        if (cflag & CRTSCTS) {
                dbg("%s Setting to CRTSCTS flow control", __FUNCTION__);
                if (usb_control_msg(dev,
                                    usb_sndctrlpipe(dev, 0),
                                    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
                                    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
                                    0 , (FTDI_SIO_RTS_CTS_HS | priv->interface),
                                    buf, 0, WDR_TIMEOUT) < 0) {
                        err("urb failed to set to rts/cts flow control");
                }

        } else {
                /*
                 * Xon/Xoff code
                 *
                 * Check the IXOFF status in the iflag component of the termios structure
                 * if IXOFF is not set, the pre-xon/xoff code is executed.
                */
                if (iflag & IXOFF) {
                        dbg("%s  request to enable xonxoff iflag=%04x",__FUNCTION__,iflag);
                        // Try to enable the XON/XOFF on the ftdi_sio
                        // Set the vstart and vstop -- could have been done up above where
                        // a lot of other dereferencing is done but that would be very
                        // inefficient as vstart and vstop are not always needed
                        vstart=port->tty->termios->c_cc[VSTART];
                        vstop=port->tty->termios->c_cc[VSTOP];
                        urb_value=(vstop << 8) | (vstart);

                        if (usb_control_msg(dev,
                                            usb_sndctrlpipe(dev, 0),
                                            FTDI_SIO_SET_FLOW_CTRL_REQUEST,
                                            FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
                                            urb_value , (FTDI_SIO_XON_XOFF_HS
                                                         | priv->interface),
                                            buf, 0, WDR_TIMEOUT) < 0) {
                                err("urb failed to set to xon/xoff flow control");
                        }
                } else {
                        /* else clause to only run if cfag ! CRTSCTS and iflag ! XOFF */
                        /* CHECKME Assuming XON/XOFF handled by tty stack - not by device */
                        dbg("%s Turning off hardware flow control", __FUNCTION__);
                        if (usb_control_msg(dev,
                                            usb_sndctrlpipe(dev, 0),
                                            FTDI_SIO_SET_FLOW_CTRL_REQUEST,
                                            FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
                                            0, priv->interface,
                                            buf, 0, WDR_TIMEOUT) < 0) {
                                err("urb failed to clear flow control");
                        }
                }

        }
        return;
} /* ftdi_termios */


static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file)
{
        struct ftdi_private *priv = usb_get_serial_port_data(port);
        unsigned char buf[2];
        int ret;

        dbg("%s TIOCMGET", __FUNCTION__);
        switch (priv->chip_type) {
        case SIO:
                /* Request the status from the device */
                if ((ret = usb_control_msg(port->serial->dev,
                                           usb_rcvctrlpipe(port->serial->dev, 0),
                                           FTDI_SIO_GET_MODEM_STATUS_REQUEST,
                                           FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
                                           0, 0,
                                           buf, 1, WDR_TIMEOUT)) < 0 ) {
                        err("%s Could not get modem status of device - err: %d", __FUNCTION__,
                            ret);
                        return(ret);
                }
                break;
        case FT8U232AM:
        case FT232BM:
        case FT2232C:
                /* the 8U232AM returns a two byte value (the sio is a 1 byte value) - in the same
                   format as the data returned from the in point */
                if ((ret = usb_control_msg(port->serial->dev,
                                           usb_rcvctrlpipe(port->serial->dev, 0),
                                           FTDI_SIO_GET_MODEM_STATUS_REQUEST,
                                           FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
                                           0, priv->interface,
                                           buf, 2, WDR_TIMEOUT)) < 0 ) {
                        err("%s Could not get modem status of device - err: %d", __FUNCTION__,
                            ret);
                        return(ret);
                }
                break;
        default:
                return -EFAULT;
                break;
        }

        return  (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) |
                (buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) |
                (buf[0]  & FTDI_SIO_RI_MASK  ? TIOCM_RI  : 0) |
                (buf[0]  & FTDI_SIO_RLSD_MASK ? TIOCM_CD  : 0) |
                priv->last_dtr_rts;
}

static int ftdi_tiocmset(struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear)
{
        dbg("%s TIOCMSET", __FUNCTION__);
        return update_mctrl(port, set, clear);
}


static int ftdi_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
{
        struct ftdi_private *priv = usb_get_serial_port_data(port);

        dbg("%s cmd 0x%04x", __FUNCTION__, cmd);

        /* Based on code from acm.c and others */
        switch (cmd) {

        case TIOCGSERIAL: /* gets serial port data */
                return get_serial_info(port, (struct serial_struct __user *) arg);

        case TIOCSSERIAL: /* sets serial port data */
                return set_serial_info(port, (struct serial_struct __user *) arg);

        /*
         * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
         * - mask passed in arg for lines of interest
         *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
         * Caller should use TIOCGICOUNT to see which one it was.
         *
         * This code is borrowed from linux/drivers/char/serial.c
         */
        case TIOCMIWAIT:
                while (priv != NULL) {
                        interruptible_sleep_on(&priv->delta_msr_wait);
                        /* see if a signal did it */
                        if (signal_pending(current))
                                return -ERESTARTSYS;
                        else {
                                char diff = priv->diff_status;

                                if (diff == 0) {
                                        return -EIO; /* no change => error */
                                }

                                /* Consume all events */
                                priv->diff_status = 0;

                                /* Return 0 if caller wanted to know about these bits */
                                if ( ((arg & TIOCM_RNG) && (diff & FTDI_RS0_RI)) ||
                                     ((arg & TIOCM_DSR) && (diff & FTDI_RS0_DSR)) ||
                                     ((arg & TIOCM_CD)  && (diff & FTDI_RS0_RLSD)) ||
                                     ((arg & TIOCM_CTS) && (diff & FTDI_RS0_CTS)) ) {
                                        return 0;
                                }
                                /*
                                 * Otherwise caller can't care less about what happened,
                                 * and so we continue to wait for more events.
                                 */
                        }
                }
                return(0);
                break;
        default:
                break;

        }


        /* This is not necessarily an error - turns out the higher layers will do
         *  some ioctls itself (see comment above)
         */
        dbg("%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h", __FUNCTION__, cmd);

        return(-ENOIOCTLCMD);
} /* ftdi_ioctl */


static void ftdi_throttle (struct usb_serial_port *port)
{
        struct ftdi_private *priv = usb_get_serial_port_data(port);
        unsigned long flags;

        dbg("%s - port %d", __FUNCTION__, port->number);

        spin_lock_irqsave(&priv->rx_lock, flags);
        priv->rx_flags |= THROTTLED;
        spin_unlock_irqrestore(&priv->rx_lock, flags);
}


static void ftdi_unthrottle (struct usb_serial_port *port)
{
        struct ftdi_private *priv = usb_get_serial_port_data(port);
        int actually_throttled;
        unsigned long flags;

        dbg("%s - port %d", __FUNCTION__, port->number);

        spin_lock_irqsave(&priv->rx_lock, flags);
        actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
        priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
        spin_unlock_irqrestore(&priv->rx_lock, flags);

        if (actually_throttled)
                schedule_delayed_work(&priv->rx_work, 0);
}

static int __init ftdi_init (void)
{
        int retval;

        dbg("%s", __FUNCTION__);
        if (vendor > 0 && product > 0) {
                /* Add user specified VID/PID to reserved element of table. */
                int i;
                for (i = 0; id_table_combined[i].idVendor; i++)
                        ;
                id_table_combined[i].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
                id_table_combined[i].idVendor = vendor;
                id_table_combined[i].idProduct = product;
        }
        retval = usb_serial_register(&ftdi_sio_device);
        if (retval)
                goto failed_sio_register;
        retval = usb_register(&ftdi_driver);
        if (retval)
                goto failed_usb_register;

        info(DRIVER_VERSION ":" DRIVER_DESC);
        return 0;
failed_usb_register:
        usb_serial_deregister(&ftdi_sio_device);
failed_sio_register:
        return retval;
}


static void __exit ftdi_exit (void)
{

        dbg("%s", __FUNCTION__);

        usb_deregister (&ftdi_driver);
        usb_serial_deregister (&ftdi_sio_device);

}


module_init(ftdi_init);
module_exit(ftdi_exit);

MODULE_AUTHOR( DRIVER_AUTHOR );
MODULE_DESCRIPTION( DRIVER_DESC );
MODULE_LICENSE("GPL");

module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
module_param(vendor, ushort, 0);
MODULE_PARM_DESC(vendor, "User specified vendor ID (default="
                __MODULE_STRING(FTDI_VID)")");
module_param(product, ushort, 0);
MODULE_PARM_DESC(vendor, "User specified product ID");