SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/usb/host/uhci-hcd.c

   1 /*
   2  * Universal Host Controller Interface driver for USB.
   3  *
   4  * Maintainer: Alan Stern <stern@rowland.harvard.edu>
   5  *
   6  * (C) Copyright 1999 Linus Torvalds
   7  * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com
   8  * (C) Copyright 1999 Randy Dunlap
   9  * (C) Copyright 1999 Georg Acher, acher@in.tum.de
  10  * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de
  11  * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch
  12  * (C) Copyright 1999 Roman Weissgaerber, weissg@vienna.at
  13  * (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface
  14  *               support from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
  15  * (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c)
  16  * (C) Copyright 2004-2005 Alan Stern, stern@rowland.harvard.edu
  17  *
  18  * Intel documents this fairly well, and as far as I know there
  19  * are no royalties or anything like that, but even so there are
  20  * people who decided that they want to do the same thing in a
  21  * completely different way.
  22  *
  23  */
  24
  25 #include <linux/config.h>
  26 #ifdef CONFIG_USB_DEBUG
  27 #define DEBUG
  28 #else
  29 #undef DEBUG
  30 #endif
  31 #include <linux/module.h>
  32 #include <linux/pci.h>
  33 #include <linux/kernel.h>
  34 #include <linux/init.h>
  35 #include <linux/delay.h>
  36 #include <linux/ioport.h>
  37 #include <linux/sched.h>
  38 #include <linux/slab.h>
  39 #include <linux/smp_lock.h>
  40 #include <linux/errno.h>
  41 #include <linux/unistd.h>
  42 #include <linux/interrupt.h>
  43 #include <linux/spinlock.h>
  44 #include <linux/debugfs.h>
  45 #include <linux/pm.h>
  46 #include <linux/dmapool.h>
  47 #include <linux/dma-mapping.h>
  48 #include <linux/usb.h>
  49 #include <linux/bitops.h>
  50
  51 #include <asm/uaccess.h>
  52 #include <asm/io.h>
  53 #include <asm/irq.h>
  54 #include <asm/system.h>
  55
  56 #include "../core/hcd.h"
  57 #include "uhci-hcd.h"
  58
  59 /*
  60  * Version Information
  61  */
  62 #define DRIVER_VERSION "v2.3"
  63 #define DRIVER_AUTHOR "Linus 'Frodo Rabbit' Torvalds, Johannes Erdfelt, \
  64 Randy Dunlap, Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber, \
  65 Alan Stern"
  66 #define DRIVER_DESC "USB Universal Host Controller Interface driver"
  67
  68 /*
  69  * debug = 0, no debugging messages
  70  * debug = 1, dump failed URB's except for stalls
  71  * debug = 2, dump all failed URB's (including stalls)
  72  *            show all queues in /debug/uhci/[pci_addr]
  73  * debug = 3, show all TD's in URB's when dumping
  74  */
  75 #ifdef DEBUG
  76 static int debug = 1;
  77 #else
  78 static int debug = 0;
  79 #endif
  80 module_param(debug, int, S_IRUGO | S_IWUSR);
  81 MODULE_PARM_DESC(debug, "Debug level");
  82 static char *errbuf;
  83 #define ERRBUF_LEN    (32 * 1024)
  84
  85 static kmem_cache_t *uhci_up_cachep;    /* urb_priv */
  86
  87 static void suspend_rh(struct uhci_hcd *uhci, enum uhci_rh_state new_state);
  88 static void wakeup_rh(struct uhci_hcd *uhci);
  89 static void uhci_get_current_frame_number(struct uhci_hcd *uhci);
  90
  91 /* If a transfer is still active after this much time, turn off FSBR */
  92 #define IDLE_TIMEOUT    msecs_to_jiffies(50)
  93 #define FSBR_DELAY      msecs_to_jiffies(50)
  94
  95 /* When we timeout an idle transfer for FSBR, we'll switch it over to */
  96 /* depth first traversal. We'll do it in groups of this number of TD's */
  97 /* to make sure it doesn't hog all of the bandwidth */
  98 #define DEPTH_INTERVAL 5
  99
 100 static inline void restart_timer(struct uhci_hcd *uhci)
 101 {
 102         mod_timer(&uhci->stall_timer, jiffies + msecs_to_jiffies(100));
 103 }
 104
 105 #include "uhci-hub.c"
 106 #include "uhci-debug.c"
 107 #include "uhci-q.c"
 108
 109 /*
 110  * Make sure the controller is completely inactive, unable to
 111  * generate interrupts or do DMA.
 112  */
 113 static void reset_hc(struct uhci_hcd *uhci)
 114 {
 115         int port;
 116
 117         /* Turn off PIRQ enable and SMI enable.  (This also turns off the
 118          * BIOS's USB Legacy Support.)  Turn off all the R/WC bits too.
 119          */
 120         pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP,
 121                         USBLEGSUP_RWC);
 122
 123         /* Reset the HC - this will force us to get a
 124          * new notification of any already connected
 125          * ports due to the virtual disconnect that it
 126          * implies.
 127          */
 128         outw(USBCMD_HCRESET, uhci->io_addr + USBCMD);
 129         mb();
 130         udelay(5);
 131         if (inw(uhci->io_addr + USBCMD) & USBCMD_HCRESET)
 132                 dev_warn(uhci_dev(uhci), "HCRESET not completed yet!\n");
 133
 134         /* Just to be safe, disable interrupt requests and
 135          * make sure the controller is stopped.
 136          */
 137         outw(0, uhci->io_addr + USBINTR);
 138         outw(0, uhci->io_addr + USBCMD);
 139
 140         /* HCRESET doesn't affect the Suspend, Reset, and Resume Detect
 141          * bits in the port status and control registers.
 142          * We have to clear them by hand.
 143          */
 144         for (port = 0; port < uhci->rh_numports; ++port)
 145                 outw(0, uhci->io_addr + USBPORTSC1 + (port * 2));
 146
 147         uhci->port_c_suspend = uhci->suspended_ports =
 148                         uhci->resuming_ports = 0;
 149         uhci->rh_state = UHCI_RH_RESET;
 150         uhci->is_stopped = UHCI_IS_STOPPED;
 151         uhci_to_hcd(uhci)->state = HC_STATE_HALT;
 152         uhci_to_hcd(uhci)->poll_rh = 0;
 153 }
 154
 155 /*
 156  * Last rites for a defunct/nonfunctional controller
 157  * or one we don't want to use any more.
 158  */
 159 static void hc_died(struct uhci_hcd *uhci)
 160 {
 161         reset_hc(uhci);
 162         uhci->hc_inaccessible = 1;
 163         del_timer(&uhci->stall_timer);
 164 }
 165
 166 /*
 167  * Initialize a controller that was newly discovered or has just been
 168  * resumed.  In either case we can't be sure of its previous state.
 169  */
 170 static void check_and_reset_hc(struct uhci_hcd *uhci)
 171 {
 172         u16 legsup;
 173         unsigned int cmd, intr;
 174
 175         /*
 176          * When restarting a suspended controller, we expect all the
 177          * settings to be the same as we left them:
 178          *
 179          *      PIRQ and SMI disabled, no R/W bits set in USBLEGSUP;
 180          *      Controller is stopped and configured with EGSM set;
 181          *      No interrupts enabled except possibly Resume Detect.
 182          *
 183          * If any of these conditions are violated we do a complete reset.
 184          */
 185         pci_read_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, &legsup);
 186         if (legsup & ~(USBLEGSUP_RO | USBLEGSUP_RWC)) {
 187                 dev_dbg(uhci_dev(uhci), "%s: legsup = 0x%04x\n",
 188                                 __FUNCTION__, legsup);
 189                 goto reset_needed;
 190         }
 191
 192         cmd = inw(uhci->io_addr + USBCMD);
 193         if ((cmd & USBCMD_RS) || !(cmd & USBCMD_CF) || !(cmd & USBCMD_EGSM)) {
 194                 dev_dbg(uhci_dev(uhci), "%s: cmd = 0x%04x\n",
 195                                 __FUNCTION__, cmd);
 196                 goto reset_needed;
 197         }
 198
 199         intr = inw(uhci->io_addr + USBINTR);
 200         if (intr & (~USBINTR_RESUME)) {
 201                 dev_dbg(uhci_dev(uhci), "%s: intr = 0x%04x\n",
 202                                 __FUNCTION__, intr);
 203                 goto reset_needed;
 204         }
 205         return;
 206
 207 reset_needed:
 208         dev_dbg(uhci_dev(uhci), "Performing full reset\n");
 209         reset_hc(uhci);
 210 }
 211
 212 /*
 213  * Store the basic register settings needed by the controller.
 214  */
 215 static void configure_hc(struct uhci_hcd *uhci)
 216 {
 217         /* Set the frame length to the default: 1 ms exactly */
 218         outb(USBSOF_DEFAULT, uhci->io_addr + USBSOF);
 219
 220         /* Store the frame list base address */
 221         outl(uhci->fl->dma_handle, uhci->io_addr + USBFLBASEADD);
 222
 223         /* Set the current frame number */
 224         outw(uhci->frame_number, uhci->io_addr + USBFRNUM);
 225
 226         /* Mark controller as running before we enable interrupts */
 227         uhci_to_hcd(uhci)->state = HC_STATE_RUNNING;
 228         mb();
 229
 230         /* Enable PIRQ */
 231         pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP,
 232                         USBLEGSUP_DEFAULT);
 233 }
 234
 235
 236 static int resume_detect_interrupts_are_broken(struct uhci_hcd *uhci)
 237 {
 238         int port;
 239
 240         switch (to_pci_dev(uhci_dev(uhci))->vendor) {
 241             default:
 242                 break;
 243
 244             case PCI_VENDOR_ID_GENESYS:
 245                 /* Genesys Logic's GL880S controllers don't generate
 246                  * resume-detect interrupts.
 247                  */
 248                 return 1;
 249
 250             case PCI_VENDOR_ID_INTEL:
 251                 /* Some of Intel's USB controllers have a bug that causes
 252                  * resume-detect interrupts if any port has an over-current
 253                  * condition.  To make matters worse, some motherboards
 254                  * hardwire unused USB ports' over-current inputs active!
 255                  * To prevent problems, we will not enable resume-detect
 256                  * interrupts if any ports are OC.
 257                  */
 258                 for (port = 0; port < uhci->rh_numports; ++port) {
 259                         if (inw(uhci->io_addr + USBPORTSC1 + port * 2) &
 260                                         USBPORTSC_OC)
 261                                 return 1;
 262                 }
 263                 break;
 264         }
 265         return 0;
 266 }
 267
 268 static void suspend_rh(struct uhci_hcd *uhci, enum uhci_rh_state new_state)
 269 __releases(uhci->lock)
 270 __acquires(uhci->lock)
 271 {
 272         int auto_stop;
 273         int int_enable;
 274
 275         auto_stop = (new_state == UHCI_RH_AUTO_STOPPED);
 276         dev_dbg(uhci_dev(uhci), "%s%s\n", __FUNCTION__,
 277                         (auto_stop ? " (auto-stop)" : ""));
 278
 279         /* If we get a suspend request when we're already auto-stopped
 280          * then there's nothing to do.
 281          */
 282         if (uhci->rh_state == UHCI_RH_AUTO_STOPPED) {
 283                 uhci->rh_state = new_state;
 284                 return;
 285         }
 286
 287         /* Enable resume-detect interrupts if they work.
 288          * Then enter Global Suspend mode, still configured.
 289          */
 290         int_enable = (resume_detect_interrupts_are_broken(uhci) ?
 291                         0 : USBINTR_RESUME);
 292         outw(int_enable, uhci->io_addr + USBINTR);
 293         outw(USBCMD_EGSM | USBCMD_CF, uhci->io_addr + USBCMD);
 294         mb();
 295         udelay(5);
 296
 297         /* If we're auto-stopping then no devices have been attached
 298          * for a while, so there shouldn't be any active URBs and the
 299          * controller should stop after a few microseconds.  Otherwise
 300          * we will give the controller one frame to stop.
 301          */
 302         if (!auto_stop && !(inw(uhci->io_addr + USBSTS) & USBSTS_HCH)) {
 303                 uhci->rh_state = UHCI_RH_SUSPENDING;
 304                 spin_unlock_irq(&uhci->lock);
 305                 msleep(1);
 306                 spin_lock_irq(&uhci->lock);
 307                 if (uhci->hc_inaccessible)      /* Died */
 308                         return;
 309         }
 310         if (!(inw(uhci->io_addr + USBSTS) & USBSTS_HCH))
 311                 dev_warn(uhci_dev(uhci), "Controller not stopped yet!\n");
 312
 313         uhci_get_current_frame_number(uhci);
 314         smp_wmb();
 315
 316         uhci->rh_state = new_state;
 317         uhci->is_stopped = UHCI_IS_STOPPED;
 318         del_timer(&uhci->stall_timer);
 319         uhci_to_hcd(uhci)->poll_rh = !int_enable;
 320
 321         uhci_scan_schedule(uhci, NULL);
 322 }
 323
 324 static void start_rh(struct uhci_hcd *uhci)
 325 {
 326         uhci->is_stopped = 0;
 327         smp_wmb();
 328
 329         /* Mark it configured and running with a 64-byte max packet.
 330          * All interrupts are enabled, even though RESUME won't do anything.
 331          */
 332         outw(USBCMD_RS | USBCMD_CF | USBCMD_MAXP, uhci->io_addr + USBCMD);
 333         outw(USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC | USBINTR_SP,
 334                         uhci->io_addr + USBINTR);
 335         mb();
 336         uhci->rh_state = UHCI_RH_RUNNING;
 337         uhci_to_hcd(uhci)->poll_rh = 1;
 338         restart_timer(uhci);
 339 }
 340
 341 static void wakeup_rh(struct uhci_hcd *uhci)
 342 __releases(uhci->lock)
 343 __acquires(uhci->lock)
 344 {
 345         dev_dbg(uhci_dev(uhci), "%s%s\n", __FUNCTION__,
 346                         uhci->rh_state == UHCI_RH_AUTO_STOPPED ?
 347                                 " (auto-start)" : "");
 348
 349         /* If we are auto-stopped then no devices are attached so there's
 350          * no need for wakeup signals.  Otherwise we send Global Resume
 351          * for 20 ms.
 352          */
 353         if (uhci->rh_state == UHCI_RH_SUSPENDED) {
 354                 uhci->rh_state = UHCI_RH_RESUMING;
 355                 outw(USBCMD_FGR | USBCMD_EGSM | USBCMD_CF,
 356                                 uhci->io_addr + USBCMD);
 357                 spin_unlock_irq(&uhci->lock);
 358                 msleep(20);
 359                 spin_lock_irq(&uhci->lock);
 360                 if (uhci->hc_inaccessible)      /* Died */
 361                         return;
 362
 363                 /* End Global Resume and wait for EOP to be sent */
 364                 outw(USBCMD_CF, uhci->io_addr + USBCMD);
 365                 mb();
 366                 udelay(4);
 367                 if (inw(uhci->io_addr + USBCMD) & USBCMD_FGR)
 368                         dev_warn(uhci_dev(uhci), "FGR not stopped yet!\n");
 369         }
 370
 371         start_rh(uhci);
 372
 373         /* Restart root hub polling */
 374         mod_timer(&uhci_to_hcd(uhci)->rh_timer, jiffies);
 375 }
 376
 377 static void stall_callback(unsigned long _uhci)
 378 {
 379         struct uhci_hcd *uhci = (struct uhci_hcd *) _uhci;
 380         unsigned long flags;
 381
 382         spin_lock_irqsave(&uhci->lock, flags);
 383         uhci_scan_schedule(uhci, NULL);
 384         check_fsbr(uhci);
 385
 386         if (!uhci->is_stopped)
 387                 restart_timer(uhci);
 388         spin_unlock_irqrestore(&uhci->lock, flags);
 389 }
 390
 391 static irqreturn_t uhci_irq(struct usb_hcd *hcd, struct pt_regs *regs)
 392 {
 393         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 394         unsigned short status;
 395         unsigned long flags;
 396
 397         /*
 398          * Read the interrupt status, and write it back to clear the
 399          * interrupt cause.  Contrary to the UHCI specification, the
 400          * "HC Halted" status bit is persistent: it is RO, not R/WC.
 401          */
 402         status = inw(uhci->io_addr + USBSTS);
 403         if (!(status & ~USBSTS_HCH))    /* shared interrupt, not mine */
 404                 return IRQ_NONE;
 405         outw(status, uhci->io_addr + USBSTS);           /* Clear it */
 406
 407         if (status & ~(USBSTS_USBINT | USBSTS_ERROR | USBSTS_RD)) {
 408                 if (status & USBSTS_HSE)
 409                         dev_err(uhci_dev(uhci), "host system error, "
 410                                         "PCI problems?\n");
 411                 if (status & USBSTS_HCPE)
 412                         dev_err(uhci_dev(uhci), "host controller process "
 413                                         "error, something bad happened!\n");
 414                 if (status & USBSTS_HCH) {
 415                         spin_lock_irqsave(&uhci->lock, flags);
 416                         if (uhci->rh_state >= UHCI_RH_RUNNING) {
 417                                 dev_err(uhci_dev(uhci),
 418                                         "host controller halted, "
 419                                         "very bad!\n");
 420                                 hc_died(uhci);
 421                                 spin_unlock_irqrestore(&uhci->lock, flags);
 422                                 return IRQ_HANDLED;
 423                         }
 424                         spin_unlock_irqrestore(&uhci->lock, flags);
 425                 }
 426         }
 427
 428         if (status & USBSTS_RD)
 429                 usb_hcd_poll_rh_status(hcd);
 430
 431         spin_lock_irqsave(&uhci->lock, flags);
 432         uhci_scan_schedule(uhci, regs);
 433         spin_unlock_irqrestore(&uhci->lock, flags);
 434
 435         return IRQ_HANDLED;
 436 }
 437
 438 /*
 439  * Store the current frame number in uhci->frame_number if the controller
 440  * is runnning
 441  */
 442 static void uhci_get_current_frame_number(struct uhci_hcd *uhci)
 443 {
 444         if (!uhci->is_stopped)
 445                 uhci->frame_number = inw(uhci->io_addr + USBFRNUM);
 446 }
 447
 448 /*
 449  * De-allocate all resources
 450  */
 451 static void release_uhci(struct uhci_hcd *uhci)
 452 {
 453         int i;
 454
 455         for (i = 0; i < UHCI_NUM_SKELQH; i++)
 456                 if (uhci->skelqh[i]) {
 457                         uhci_free_qh(uhci, uhci->skelqh[i]);
 458                         uhci->skelqh[i] = NULL;
 459                 }
 460
 461         if (uhci->term_td) {
 462                 uhci_free_td(uhci, uhci->term_td);
 463                 uhci->term_td = NULL;
 464         }
 465
 466         if (uhci->qh_pool) {
 467                 dma_pool_destroy(uhci->qh_pool);
 468                 uhci->qh_pool = NULL;
 469         }
 470
 471         if (uhci->td_pool) {
 472                 dma_pool_destroy(uhci->td_pool);
 473                 uhci->td_pool = NULL;
 474         }
 475
 476         if (uhci->fl) {
 477                 dma_free_coherent(uhci_dev(uhci), sizeof(*uhci->fl),
 478                                 uhci->fl, uhci->fl->dma_handle);
 479                 uhci->fl = NULL;
 480         }
 481
 482         if (uhci->dentry) {
 483                 debugfs_remove(uhci->dentry);
 484                 uhci->dentry = NULL;
 485         }
 486 }
 487
 488 static int uhci_reset(struct usb_hcd *hcd)
 489 {
 490         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 491         unsigned io_size = (unsigned) hcd->rsrc_len;
 492         int port;
 493
 494         uhci->io_addr = (unsigned long) hcd->rsrc_start;
 495
 496         /* The UHCI spec says devices must have 2 ports, and goes on to say
 497          * they may have more but gives no way to determine how many there
 498          * are.  However, according to the UHCI spec, Bit 7 of the port
 499          * status and control register is always set to 1.  So we try to
 500          * use this to our advantage.
 501          */
 502         for (port = 0; port < (io_size - USBPORTSC1) / 2; port++) {
 503                 unsigned int portstatus;
 504
 505                 portstatus = inw(uhci->io_addr + USBPORTSC1 + (port * 2));
 506                 if (!(portstatus & 0x0080))
 507                         break;
 508         }
 509         if (debug)
 510                 dev_info(uhci_dev(uhci), "detected %d ports\n", port);
 511
 512         /* Anything less than 2 or greater than 7 is weird,
 513          * so we'll ignore it.
 514          */
 515         if (port < 2 || port > UHCI_RH_MAXCHILD) {
 516                 dev_info(uhci_dev(uhci), "port count misdetected? "
 517                                 "forcing to 2 ports\n");
 518                 port = 2;
 519         }
 520         uhci->rh_numports = port;
 521
 522         /* Kick BIOS off this hardware and reset if the controller
 523          * isn't already safely quiescent.
 524          */
 525         check_and_reset_hc(uhci);
 526         return 0;
 527 }
 528
 529 /* Make sure the controller is quiescent and that we're not using it
 530  * any more.  This is mainly for the benefit of programs which, like kexec,
 531  * expect the hardware to be idle: not doing DMA or generating IRQs.
 532  *
 533  * This routine may be called in a damaged or failing kernel.  Hence we
 534  * do not acquire the spinlock before shutting down the controller.
 535  */
 536 static void uhci_shutdown(struct pci_dev *pdev)
 537 {
 538         struct usb_hcd *hcd = (struct usb_hcd *) pci_get_drvdata(pdev);
 539
 540         hc_died(hcd_to_uhci(hcd));
 541 }
 542
 543 /*
 544  * Allocate a frame list, and then setup the skeleton
 545  *
 546  * The hardware doesn't really know any difference
 547  * in the queues, but the order does matter for the
 548  * protocols higher up. The order is:
 549  *
 550  *  - any isochronous events handled before any
 551  *    of the queues. We don't do that here, because
 552  *    we'll create the actual TD entries on demand.
 553  *  - The first queue is the interrupt queue.
 554  *  - The second queue is the control queue, split into low- and full-speed
 555  *  - The third queue is bulk queue.
 556  *  - The fourth queue is the bandwidth reclamation queue, which loops back
 557  *    to the full-speed control queue.
 558  */
 559 static int uhci_start(struct usb_hcd *hcd)
 560 {
 561         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 562         int retval = -EBUSY;
 563         int i;
 564         dma_addr_t dma_handle;
 565         struct dentry *dentry;
 566
 567         hcd->uses_new_polling = 1;
 568         if (pci_find_capability(to_pci_dev(uhci_dev(uhci)), PCI_CAP_ID_PM))
 569                 hcd->can_wakeup = 1;            /* Assume it supports PME# */
 570
 571         dentry = debugfs_create_file(hcd->self.bus_name,
 572                         S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root, uhci,
 573                         &uhci_debug_operations);
 574         if (!dentry) {
 575                 dev_err(uhci_dev(uhci),
 576                                 "couldn't create uhci debugfs entry\n");
 577                 retval = -ENOMEM;
 578                 goto err_create_debug_entry;
 579         }
 580         uhci->dentry = dentry;
 581
 582         uhci->fsbr = 0;
 583         uhci->fsbrtimeout = 0;
 584
 585         spin_lock_init(&uhci->lock);
 586         INIT_LIST_HEAD(&uhci->qh_remove_list);
 587
 588         INIT_LIST_HEAD(&uhci->td_remove_list);
 589
 590         INIT_LIST_HEAD(&uhci->urb_remove_list);
 591
 592         INIT_LIST_HEAD(&uhci->urb_list);
 593
 594         INIT_LIST_HEAD(&uhci->complete_list);
 595
 596         init_waitqueue_head(&uhci->waitqh);
 597
 598         init_timer(&uhci->stall_timer);
 599         uhci->stall_timer.function = stall_callback;
 600         uhci->stall_timer.data = (unsigned long) uhci;
 601
 602         uhci->fl = dma_alloc_coherent(uhci_dev(uhci), sizeof(*uhci->fl),
 603                         &dma_handle, 0);
 604         if (!uhci->fl) {
 605                 dev_err(uhci_dev(uhci), "unable to allocate "
 606                                 "consistent memory for frame list\n");
 607                 goto err_alloc_fl;
 608         }
 609
 610         memset((void *)uhci->fl, 0, sizeof(*uhci->fl));
 611
 612         uhci->fl->dma_handle = dma_handle;
 613
 614         uhci->td_pool = dma_pool_create("uhci_td", uhci_dev(uhci),
 615                         sizeof(struct uhci_td), 16, 0);
 616         if (!uhci->td_pool) {
 617                 dev_err(uhci_dev(uhci), "unable to create td dma_pool\n");
 618                 goto err_create_td_pool;
 619         }
 620
 621         uhci->qh_pool = dma_pool_create("uhci_qh", uhci_dev(uhci),
 622                         sizeof(struct uhci_qh), 16, 0);
 623         if (!uhci->qh_pool) {
 624                 dev_err(uhci_dev(uhci), "unable to create qh dma_pool\n");
 625                 goto err_create_qh_pool;
 626         }
 627
 628         uhci->term_td = uhci_alloc_td(uhci);
 629         if (!uhci->term_td) {
 630                 dev_err(uhci_dev(uhci), "unable to allocate terminating TD\n");
 631                 goto err_alloc_term_td;
 632         }
 633
 634         for (i = 0; i < UHCI_NUM_SKELQH; i++) {
 635                 uhci->skelqh[i] = uhci_alloc_qh(uhci);
 636                 if (!uhci->skelqh[i]) {
 637                         dev_err(uhci_dev(uhci), "unable to allocate QH\n");
 638                         goto err_alloc_skelqh;
 639                 }
 640         }
 641
 642         /*
 643          * 8 Interrupt queues; link all higher int queues to int1,
 644          * then link int1 to control and control to bulk
 645          */
 646         uhci->skel_int128_qh->link =
 647                         uhci->skel_int64_qh->link =
 648                         uhci->skel_int32_qh->link =
 649                         uhci->skel_int16_qh->link =
 650                         uhci->skel_int8_qh->link =
 651                         uhci->skel_int4_qh->link =
 652                         uhci->skel_int2_qh->link =
 653                         cpu_to_le32(uhci->skel_int1_qh->dma_handle) | UHCI_PTR_QH;
 654         uhci->skel_int1_qh->link = cpu_to_le32(uhci->skel_ls_control_qh->dma_handle) | UHCI_PTR_QH;
 655
 656         uhci->skel_ls_control_qh->link = cpu_to_le32(uhci->skel_fs_control_qh->dma_handle) | UHCI_PTR_QH;
 657         uhci->skel_fs_control_qh->link = cpu_to_le32(uhci->skel_bulk_qh->dma_handle) | UHCI_PTR_QH;
 658         uhci->skel_bulk_qh->link = cpu_to_le32(uhci->skel_term_qh->dma_handle) | UHCI_PTR_QH;
 659
 660         /* This dummy TD is to work around a bug in Intel PIIX controllers */
 661         uhci_fill_td(uhci->term_td, 0, (UHCI_NULL_DATA_SIZE << 21) |
 662                 (0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0);
 663         uhci->term_td->link = cpu_to_le32(uhci->term_td->dma_handle);
 664
 665         uhci->skel_term_qh->link = UHCI_PTR_TERM;
 666         uhci->skel_term_qh->element = cpu_to_le32(uhci->term_td->dma_handle);
 667
 668         /*
 669          * Fill the frame list: make all entries point to the proper
 670          * interrupt queue.
 671          *
 672          * The interrupt queues will be interleaved as evenly as possible.
 673          * There's not much to be done about period-1 interrupts; they have
 674          * to occur in every frame.  But we can schedule period-2 interrupts
 675          * in odd-numbered frames, period-4 interrupts in frames congruent
 676          * to 2 (mod 4), and so on.  This way each frame only has two
 677          * interrupt QHs, which will help spread out bandwidth utilization.
 678          */
 679         for (i = 0; i < UHCI_NUMFRAMES; i++) {
 680                 int irq;
 681
 682                 /*
 683                  * ffs (Find First bit Set) does exactly what we need:
 684                  * 1,3,5,...  => ffs = 0 => use skel_int2_qh = skelqh[6],
 685                  * 2,6,10,... => ffs = 1 => use skel_int4_qh = skelqh[5], etc.
 686                  * ffs > 6 => not on any high-period queue, so use
 687                  *      skel_int1_qh = skelqh[7].
 688                  * Add UHCI_NUMFRAMES to insure at least one bit is set.
 689                  */
 690                 irq = 6 - (int) __ffs(i + UHCI_NUMFRAMES);
 691                 if (irq < 0)
 692                         irq = 7;
 693
 694                 /* Only place we don't use the frame list routines */
 695                 uhci->fl->frame[i] = UHCI_PTR_QH |
 696                                 cpu_to_le32(uhci->skelqh[irq]->dma_handle);
 697         }
 698
 699         /*
 700          * Some architectures require a full mb() to enforce completion of
 701          * the memory writes above before the I/O transfers in configure_hc().
 702          */
 703         mb();
 704
 705         configure_hc(uhci);
 706         start_rh(uhci);
 707         return 0;
 708
 709 /*
 710  * error exits:
 711  */
 712 err_alloc_skelqh:
 713         for (i = 0; i < UHCI_NUM_SKELQH; i++)
 714                 if (uhci->skelqh[i]) {
 715                         uhci_free_qh(uhci, uhci->skelqh[i]);
 716                         uhci->skelqh[i] = NULL;
 717                 }
 718
 719         uhci_free_td(uhci, uhci->term_td);
 720         uhci->term_td = NULL;
 721
 722 err_alloc_term_td:
 723         dma_pool_destroy(uhci->qh_pool);
 724         uhci->qh_pool = NULL;
 725
 726 err_create_qh_pool:
 727         dma_pool_destroy(uhci->td_pool);
 728         uhci->td_pool = NULL;
 729
 730 err_create_td_pool:
 731         dma_free_coherent(uhci_dev(uhci), sizeof(*uhci->fl),
 732                         uhci->fl, uhci->fl->dma_handle);
 733         uhci->fl = NULL;
 734
 735 err_alloc_fl:
 736         debugfs_remove(uhci->dentry);
 737         uhci->dentry = NULL;
 738
 739 err_create_debug_entry:
 740         return retval;
 741 }
 742
 743 static void uhci_stop(struct usb_hcd *hcd)
 744 {
 745         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 746
 747         spin_lock_irq(&uhci->lock);
 748         reset_hc(uhci);
 749         uhci_scan_schedule(uhci, NULL);
 750         spin_unlock_irq(&uhci->lock);
 751
 752         del_timer_sync(&uhci->stall_timer);
 753         release_uhci(uhci);
 754 }
 755
 756 #ifdef CONFIG_PM
 757 static int uhci_rh_suspend(struct usb_hcd *hcd)
 758 {
 759         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 760
 761         spin_lock_irq(&uhci->lock);
 762         if (!uhci->hc_inaccessible)             /* Not dead */
 763                 suspend_rh(uhci, UHCI_RH_SUSPENDED);
 764         spin_unlock_irq(&uhci->lock);
 765         return 0;
 766 }
 767
 768 static int uhci_rh_resume(struct usb_hcd *hcd)
 769 {
 770         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 771         int rc = 0;
 772
 773         spin_lock_irq(&uhci->lock);
 774         if (uhci->hc_inaccessible) {
 775                 if (uhci->rh_state == UHCI_RH_SUSPENDED) {
 776                         dev_warn(uhci_dev(uhci), "HC isn't running!\n");
 777                         rc = -ENODEV;
 778                 }
 779                 /* Otherwise the HC is dead */
 780         } else
 781                 wakeup_rh(uhci);
 782         spin_unlock_irq(&uhci->lock);
 783         return rc;
 784 }
 785
 786 static int uhci_suspend(struct usb_hcd *hcd, pm_message_t message)
 787 {
 788         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 789         int rc = 0;
 790
 791         dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__);
 792
 793         spin_lock_irq(&uhci->lock);
 794         if (uhci->hc_inaccessible)      /* Dead or already suspended */
 795                 goto done;
 796
 797 #ifndef CONFIG_USB_SUSPEND
 798         /* Otherwise this would never happen */
 799         suspend_rh(uhci, UHCI_RH_SUSPENDED);
 800 #endif
 801
 802         if (uhci->rh_state > UHCI_RH_SUSPENDED) {
 803                 dev_warn(uhci_dev(uhci), "Root hub isn't suspended!\n");
 804                 hcd->state = HC_STATE_RUNNING;
 805                 rc = -EBUSY;
 806                 goto done;
 807         };
 808
 809         /* All PCI host controllers are required to disable IRQ generation
 810          * at the source, so we must turn off PIRQ.
 811          */
 812         pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, 0);
 813         uhci->hc_inaccessible = 1;
 814
 815         /* FIXME: Enable non-PME# remote wakeup? */
 816
 817 done:
 818         spin_unlock_irq(&uhci->lock);
 819         if (rc == 0)
 820                 del_timer_sync(&hcd->rh_timer);
 821         return rc;
 822 }
 823
 824 static int uhci_resume(struct usb_hcd *hcd)
 825 {
 826         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 827
 828         dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__);
 829
 830         if (uhci->rh_state == UHCI_RH_RESET)    /* Dead */
 831                 return 0;
 832         spin_lock_irq(&uhci->lock);
 833
 834         /* FIXME: Disable non-PME# remote wakeup? */
 835
 836         uhci->hc_inaccessible = 0;
 837
 838         /* The BIOS may have changed the controller settings during a
 839          * system wakeup.  Check it and reconfigure to avoid problems.
 840          */
 841         check_and_reset_hc(uhci);
 842         configure_hc(uhci);
 843
 844 #ifndef CONFIG_USB_SUSPEND
 845         /* Otherwise this would never happen */
 846         wakeup_rh(uhci);
 847 #endif
 848         if (uhci->rh_state == UHCI_RH_RESET)
 849                 suspend_rh(uhci, UHCI_RH_SUSPENDED);
 850
 851         spin_unlock_irq(&uhci->lock);
 852
 853         if (hcd->poll_rh)
 854                 usb_hcd_poll_rh_status(hcd);
 855         return 0;
 856 }
 857 #endif
 858
 859 /* Wait until all the URBs for a particular device/endpoint are gone */
 860 static void uhci_hcd_endpoint_disable(struct usb_hcd *hcd,
 861                 struct usb_host_endpoint *ep)
 862 {
 863         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 864
 865         wait_event_interruptible(uhci->waitqh, list_empty(&ep->urb_list));
 866 }
 867
 868 static int uhci_hcd_get_frame_number(struct usb_hcd *hcd)
 869 {
 870         struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 871         unsigned long flags;
 872         int is_stopped;
 873         int frame_number;
 874
 875         /* Minimize latency by avoiding the spinlock */
 876         local_irq_save(flags);
 877         is_stopped = uhci->is_stopped;
 878         smp_rmb();
 879         frame_number = (is_stopped ? uhci->frame_number :
 880                         inw(uhci->io_addr + USBFRNUM));
 881         local_irq_restore(flags);
 882         return frame_number;
 883 }
 884
 885 static const char hcd_name[] = "uhci_hcd";
 886
 887 static const struct hc_driver uhci_driver = {
 888         .description =          hcd_name,
 889         .product_desc =         "UHCI Host Controller",
 890         .hcd_priv_size =        sizeof(struct uhci_hcd),
 891
 892         /* Generic hardware linkage */
 893         .irq =                  uhci_irq,
 894         .flags =                HCD_USB11,
 895
 896         /* Basic lifecycle operations */
 897         .reset =                uhci_reset,
 898         .start =                uhci_start,
 899 #ifdef CONFIG_PM
 900         .suspend =              uhci_suspend,
 901         .resume =               uhci_resume,
 902         .hub_suspend =          uhci_rh_suspend,
 903         .hub_resume =           uhci_rh_resume,
 904 #endif
 905         .stop =                 uhci_stop,
 906
 907         .urb_enqueue =          uhci_urb_enqueue,
 908         .urb_dequeue =          uhci_urb_dequeue,
 909
 910         .endpoint_disable =     uhci_hcd_endpoint_disable,
 911         .get_frame_number =     uhci_hcd_get_frame_number,
 912
 913         .hub_status_data =      uhci_hub_status_data,
 914         .hub_control =          uhci_hub_control,
 915 };
 916
 917 static const struct pci_device_id uhci_pci_ids[] = { {
 918         /* handle any USB UHCI controller */
 919         PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x00), ~0),
 920         .driver_data =  (unsigned long) &uhci_driver,
 921         }, { /* end: all zeroes */ }
 922 };
 923
 924 MODULE_DEVICE_TABLE(pci, uhci_pci_ids);
 925
 926 static struct pci_driver uhci_pci_driver = {
 927         .name =         (char *)hcd_name,
 928         .id_table =     uhci_pci_ids,
 929
 930         .probe =        usb_hcd_pci_probe,
 931         .remove =       usb_hcd_pci_remove,
 932         .shutdown =     uhci_shutdown,
 933
 934 #ifdef  CONFIG_PM
 935         .suspend =      usb_hcd_pci_suspend,
 936         .resume =       usb_hcd_pci_resume,
 937 #endif  /* PM */
 938 };
 939
 940 static int __init uhci_hcd_init(void)
 941 {
 942         int retval = -ENOMEM;
 943
 944         printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION "\n");
 945
 946         if (usb_disabled())
 947                 return -ENODEV;
 948
 949         if (debug) {
 950                 errbuf = kmalloc(ERRBUF_LEN, GFP_KERNEL);
 951                 if (!errbuf)
 952                         goto errbuf_failed;
 953         }
 954
 955         uhci_debugfs_root = debugfs_create_dir("uhci", NULL);
 956         if (!uhci_debugfs_root)
 957                 goto debug_failed;
 958
 959         uhci_up_cachep = kmem_cache_create("uhci_urb_priv",
 960                 sizeof(struct urb_priv), 0, 0, NULL, NULL);
 961         if (!uhci_up_cachep)
 962                 goto up_failed;
 963
 964         retval = pci_register_driver(&uhci_pci_driver);
 965         if (retval)
 966                 goto init_failed;
 967
 968         return 0;
 969
 970 init_failed:
 971         if (kmem_cache_destroy(uhci_up_cachep))
 972                 warn("not all urb_priv's were freed!");
 973
 974 up_failed:
 975         debugfs_remove(uhci_debugfs_root);
 976
 977 debug_failed:
 978         kfree(errbuf);
 979
 980 errbuf_failed:
 981
 982         return retval;
 983 }
 984
 985 static void __exit uhci_hcd_cleanup(void)
 986 {
 987         pci_unregister_driver(&uhci_pci_driver);
 988
 989         if (kmem_cache_destroy(uhci_up_cachep))
 990                 warn("not all urb_priv's were freed!");
 991
 992         debugfs_remove(uhci_debugfs_root);
 993         kfree(errbuf);
 994 }
 995
 996 module_init(uhci_hcd_init);
 997 module_exit(uhci_hcd_cleanup);
 998
 999 MODULE_AUTHOR(DRIVER_AUTHOR);
1000 MODULE_DESCRIPTION(DRIVER_DESC);
1001 MODULE_LICENSE("GPL");