1 /*****************************************************************************
2 * Copyright(c) 2008, RealTEK Technology Inc. All Right Reserved.
4 * Module: __INC_HAL8192SEREG_H
7 * Note: 1. Define Mac register address and corresponding bit mask map
9 * 3. Backward compatible register with useless address.
10 * 4. Define 92SU required register address and definition.
13 * Export: Constants, macro, functions(API), global variables(None).
19 * 08/07/2007 MHC 1. Porting from 9x series PHYCFG.h.
20 * 2. Reorganize code architecture.
22 *****************************************************************************/
26 typedef enum _VERSION_8192S{
30 }VERSION_8192S,*PVERSION_8192S;
33 typedef enum _VERSION_8192SUsb{
34 VERSION_8192SU_A, //A-Cut
35 VERSION_8192SU_B, //B-Cut
36 VERSION_8192SU_C, //C-Cut
37 }VERSION_8192SUsb, *PVERSION_8192SUsb;
39 typedef enum _VERSION_819xU{
40 VERSION_819xU_A, // A-cut
41 VERSION_819xU_B, // B-cut
42 VERSION_819xU_C,// C-cut
43 }VERSION_819xU,*PVERSION_819xU;
46 /* 2007/11/15 MH Define different RF type. */
47 typedef enum _RT_RF_TYPE_DEFINITION
60 typedef enum _BaseBand_Config_Type{
61 BaseBand_Config_PHY_REG = 0, //Radio Path A
62 BaseBand_Config_AGC_TAB = 1, //Radio Path B
63 }BaseBand_Config_Type, *PBaseBand_Config_Type;
65 #define RTL8187_REQT_READ 0xc0
66 #define RTL8187_REQT_WRITE 0x40
67 #define RTL8187_REQ_GET_REGS 0x05
68 #define RTL8187_REQ_SET_REGS 0x05
73 #define R8180_MAX_RETRY 255
74 //#define MAX_RX_NORMAL_URB 3
75 //#define MAX_RX_COMMAND_URB 2
76 #define RX_URB_SIZE 9100
78 #define BB_ANTATTEN_CHAN14 0x0c
79 #define BB_ANTENNA_B 0x40
81 #define BB_HOST_BANG (1<<30)
82 #define BB_HOST_BANG_EN (1<<2)
83 #define BB_HOST_BANG_CLK (1<<1)
84 #define BB_HOST_BANG_RW (1<<3)
85 #define BB_HOST_BANG_DATA 1
88 //============================================================
90 //============================================================
91 #define BB_GLOBAL_RESET_BIT 0x1
98 #define MAC_FILTER_MASK ((1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<5) | \
99 (1<<12) | (1<<18) | (1<<19) | (1<<20) | (1<<21) | (1<<22) | (1<<23))
101 #define RX_FIFO_THRESHOLD_MASK ((1<<13) | (1<<14) | (1<<15))
102 #define RX_FIFO_THRESHOLD_SHIFT 13
103 #define RX_FIFO_THRESHOLD_128 3
104 #define RX_FIFO_THRESHOLD_256 4
105 #define RX_FIFO_THRESHOLD_512 5
106 #define RX_FIFO_THRESHOLD_1024 6
107 #define RX_FIFO_THRESHOLD_NONE 7
109 #define MAX_RX_DMA_MASK ((1<<8) | (1<<9) | (1<<10))
111 //----------------------------------------------------------------------------
112 // 8190 CPU General Register (offset 0x100, 4 byte)
113 //----------------------------------------------------------------------------
114 #define CPU_CCK_LOOPBACK 0x00030000
115 #define CPU_GEN_SYSTEM_RESET 0x00000001
116 #define CPU_GEN_FIRMWARE_RESET 0x00000008
117 #define CPU_GEN_BOOT_RDY 0x00000010
118 #define CPU_GEN_FIRM_RDY 0x00000020
119 #define CPU_GEN_PUT_CODE_OK 0x00000080
120 #define CPU_GEN_BB_RST 0x00000100
121 #define CPU_GEN_PWR_STB_CPU 0x00000004
122 #define CPU_GEN_NO_LOOPBACK_MSK 0xFFF8FFFF // Set bit18,17,16 to 0. Set bit19
123 #define CPU_GEN_NO_LOOPBACK_SET 0x00080000 // Set BIT19 to 1
124 //----------------------------------------------------------------------------
126 //// 8190 AcmHwCtrl bits (offset 0x171, 1 byte)
127 ////----------------------------------------------------------------------------
128 #define MSR_LINK_MASK ((1<<0)|(1<<1))
129 #define MSR_LINK_MANAGED 2
130 #define MSR_LINK_NONE 0
131 #define MSR_LINK_SHIFT 0
132 #define MSR_LINK_ADHOC 1
133 #define MSR_LINK_MASTER 3
134 #define MSR_LINK_ENEDCA (1<<4)
137 //#define Cmd9346CR_9356SEL (1<<4)
138 #define EPROM_CMD_RESERVED_MASK (1<<5)
139 #define EPROM_CMD_OPERATING_MODE_SHIFT 6
140 #define EPROM_CMD_OPERATING_MODE_MASK ((1<<7)|(1<<6))
141 #define EPROM_CMD_CONFIG 0x3
142 #define EPROM_CMD_NORMAL 0
143 #define EPROM_CMD_LOAD 1
144 #define EPROM_CMD_PROGRAM 2
145 #define EPROM_CS_SHIFT 3
146 #define EPROM_CK_SHIFT 2
147 #define EPROM_W_SHIFT 1
148 #define EPROM_R_SHIFT 0
150 //#define MAC0 0x000,
151 //#define MAC1 0x001,
152 //#define MAC2 0x002,
153 //#define MAC3 0x003,
154 //#define MAC4 0x004,
155 //#define MAC5 0x005,
157 //============================================================
158 // 8192S Regsiter offset definition
159 //============================================================
162 // MAC register 0x0 - 0x5xx
163 // 1. System configuration registers.
164 // 2. Command Control Registers
165 // 3. MACID Setting Registers
166 // 4. Timing Control Registers
167 // 5. FIFO Control Registers
168 // 6. Adaptive Control Registers
169 // 7. EDCA Setting Registers
170 // 8. WMAC, BA and CCX related Register.
171 // 9. Security Control Registers
172 // 10. Power Save Control Registers
173 // 11. General Purpose Registers
174 // 12. Host Interrupt Status Registers
175 // 13. Test Mode and Debug Control Registers
176 // 14. PCIE config register
181 // 1. System Configuration Registers (Offset: 0x0000 - 0x003F)
183 #define SYS_ISO_CTRL 0x0000 // System Isolation Interface Control.
184 #define SYS_FUNC_EN 0x0002 // System Function Enable.
185 #define PMC_FSM 0x0004 // Power Sequence Control.
186 #define SYS_CLKR 0x0008 // System Clock.
187 #define EPROM_CMD 0x000A // 93C46/93C56 Command Register. (win CR93C46)
188 #define EE_VPD 0x000C // EEPROM VPD Data.
189 #define AFE_MISC 0x0010 // AFE Misc.
190 #define SPS0_CTRL 0x0011 // Switching Power Supply 0 Control.
191 #define SPS1_CTRL 0x0018 // Switching Power Supply 1 Control.
192 #define RF_CTRL 0x001F // RF Block Control.
193 #define LDOA15_CTRL 0x0020 // V15 Digital LDO Control.
194 #define LDOV12D_CTRL 0x0021 // V12 Digital LDO Control.
195 #define LDOHCI12_CTRL 0x0022 // V12 Digital LDO Control.
196 #define LDO_USB_SDIO 0x0023 // LDO USB Control.
197 #define LPLDO_CTRL 0x0024 // Low Power LDO Control.
198 #define AFE_XTAL_CTRL 0x0026 // AFE Crystal Control.
199 #define AFE_PLL_CTRL 0x0028 // System Function Enable.
200 #define EFUSE_CTRL 0x0030 // E-Fuse Control.
201 #define EFUSE_TEST 0x0034 // E-Fuse Test.
202 #define PWR_DATA 0x0038 // Power on date.
203 #define DBG_PORT 0x003A // MAC debug port select
204 #define DPS_TIMER 0x003C // Deep Power Save Timer Register.
205 #define RCLK_MON 0x003E // Retention Clock Monitor.
208 // 2. Command Control Registers (Offset: 0x0040 - 0x004F)
210 #define CMDR 0x0040 // MAC Command Register.
211 #define TXPAUSE 0x0042 // Transmission Pause Register.
212 #define LBKMD_SEL 0x0043 // Loopback Mode Select Register.
213 #define TCR 0x0044 // Transmit Configuration Register
214 #define RCR 0x0048 // Receive Configuration Register
215 #define MSR 0x004C // Media Status register
216 #define SYSF_CFG 0x004D // System Function Configuration.
217 #define RX_PKY_LIMIT 0x004E // RX packet length limit
218 #define MBIDCTRL 0x004F // MBSSID Control.
221 // 3. MACID Setting Registers (Offset: 0x0050 - 0x007F)
223 #define MACIDR 0x0050 // MAC ID Register, Offset 0x0050-0x0055
224 #define MACIDR0 0x0050 // MAC ID Register, Offset 0x0050-0x0053
225 #define MACIDR4 0x0054 // MAC ID Register, Offset 0x0054-0x0055
226 #define BSSIDR 0x0058 // BSSID Register, Offset 0x0058-0x005D
227 #define HWVID 0x005E // HW Version ID.
228 #define MAR 0x0060 // Multicase Address.
229 #define MBIDCAMCONTENT 0x0068 // MBSSID CAM Content.
230 #define MBIDCAMCFG 0x0070 // MBSSID CAM Configuration.
231 #define BUILDTIME 0x0074 // Build Time Register.
232 #define BUILDUSER 0x0078 // Build User Register.
234 // Redifine MACID register, to compatible prior ICs.
239 // 4. Timing Control Registers (Offset: 0x0080 - 0x009F)
241 #define TSFR 0x0080 // Timing Sync Function Timer Register.
242 #define SLOT_TIME 0x0089 // Slot Time Register, in us.
243 #define USTIME 0x008A // EDCA/TSF clock unit time us unit.
244 #define SIFS_CCK 0x008C // SIFS for CCK, in us.
245 #define SIFS_OFDM 0x008E // SIFS for OFDM, in us.
246 #define PIFS_TIME 0x0090 // PIFS time register.
247 #define ACK_TIMEOUT 0x0091 // Ack Timeout Register
248 #define EIFSTR 0x0092 // EIFS time regiser.
249 #define BCN_INTERVAL 0x0094 // Beacon Interval, in TU.
250 #define ATIMWND 0x0096 // ATIM Window width, in TU.
251 #define BCN_DRV_EARLY_INT 0x0098 // Driver Early Interrupt.
252 #define BCN_DMATIME 0x009A // Beacon DMA and ATIM INT Time.
253 #define BCN_ERR_THRESH 0x009C // Beacon Error Threshold.
254 #define MLT 0x009D // MSDU Lifetime.
255 #define RSVD_MAC_TUNE_US 0x009E // MAC Internal USE.
258 // 5. FIFO Control Registers (Offset: 0x00A0 - 0x015F)
261 #define RQPN1 0x00A0 // Reserved Queue Page Number for BK
262 #define RQPN2 0x00A1 // Reserved Queue Page Number for BE
263 #define RQPN3 0x00A2 // Reserved Queue Page Number for VI
264 #define RQPN4 0x00A3 // Reserved Queue Page Number for VO
265 #define RQPN5 0x00A4 // Reserved Queue Page Number for HCCA
266 #define RQPN6 0x00A5 // Reserved Queue Page Number for CMD
267 #define RQPN7 0x00A6 // Reserved Queue Page Number for MGNT
268 #define RQPN8 0x00A7 // Reserved Queue Page Number for HIGH
269 #define RQPN9 0x00A8 // Reserved Queue Page Number for Beacon
270 #define RQPN10 0x00A9 // Reserved Queue Page Number for Public
271 #define LD_RQPN 0x00AB //
272 #define RXFF_BNDY 0x00AC //
273 #define RXRPT_BNDY 0x00B0 //
274 #define TXPKTBUF_PGBNDY 0x00B4 //
275 #define PBP 0x00B5 //
276 #define RXDRVINFO_SZ 0x00B6 //
277 #define TXFF_STATUS 0x00B7 //
278 #define RXFF_STATUS 0x00B8 //
279 #define TXFF_EMPTY_TH 0x00B9 //
280 #define SDIO_RX_BLKSZ 0x00BC //
281 #define RXDMA 0x00BD //
282 #define RXPKT_NUM 0x00BE //
283 #define C2HCMD_UDT_SIZE 0x00C0 //
284 #define C2HCMD_UDT_ADDR 0x00C2 //
285 #define FIFOPAGE1 0x00C4 // Available public queue page number
286 #define FIFOPAGE2 0x00C8 //
287 #define FIFOPAGE3 0x00CC //
288 #define FIFOPAGE4 0x00D0 //
289 #define FIFOPAGE5 0x00D4 //
290 #define FW_RSVD_PG_CRTL 0x00D8 //
291 #define RXDMA_AGG_PG_TH 0x00D9 //
292 #define TXRPTFF_RDPTR 0x00E0 //
293 #define TXRPTFF_WTPTR 0x00E4 //
294 #define C2HFF_RDPTR 0x00E8 //FIFO Read pointer register.
295 #define C2HFF_WTPTR 0x00EC //FIFO Write pointer register.
296 #define RXFF0_RDPTR 0x00F0 //
297 #define RXFF0_WTPTR 0x00F4 //
298 #define RXFF1_RDPTR 0x00F8 //
299 #define RXFF1_WTPTR 0x00FC //
300 #define RXRPT0_RDPTR 0x0100 //
301 #define RXRPT0_WTPTR 0x0104 //
302 #define RXRPT1_RDPTR 0x0108 //
303 #define RXRPT1_WTPTR 0x010C //
304 #define RX0_UDT_SIZE 0x0110 //
305 #define RX1PKTNUM 0x0114 //
306 #define RXFILTERMAP 0x0116 //
307 #define RXFILTERMAP_GP1 0x0118 //
308 #define RXFILTERMAP_GP2 0x011A //
309 #define RXFILTERMAP_GP3 0x011C //
310 #define BCNQ_CTRL 0x0120 //
311 #define MGTQ_CTRL 0x0124 //
312 #define HIQ_CTRL 0x0128 //
313 #define VOTID7_CTRL 0x012c //
314 #define VOTID6_CTRL 0x0130 //
315 #define VITID5_CTRL 0x0134 //
316 #define VITID4_CTRL 0x0138 //
317 #define BETID3_CTRL 0x013c //
318 #define BETID0_CTRL 0x0140 //
319 #define BKTID2_CTRL 0x0144 //
320 #define BKTID1_CTRL 0x0148 //
321 #define CMDQ_CTRL 0x014c //
322 #define TXPKT_NUM_CTRL 0x0150 //
323 #define TXQ_PGADD 0x0152 //
324 #define TXFF_PG_NUM 0x0154 //
325 #define TRXDMA_STATUS 0x0156 //
328 // 6. Adaptive Control Registers (Offset: 0x0160 - 0x01CF)
330 #define INIMCS_SEL 0x0160 // Init MCSrate for 32 MACID 0x160-17f
331 #define TX_RATE_REG INIMCS_SEL //Current Tx rate register
332 #define INIRTSMCS_SEL 0x0180 // Init RTSMCSrate
333 #define RRSR 0x0181 // Response rate setting.
334 #define ARFR0 0x0184 // Auto Rate Fallback 0 Register.
335 #define ARFR1 0x0188 //
336 #define ARFR2 0x018C //
337 #define ARFR3 0x0190 //
338 #define ARFR4 0x0194 //
339 #define ARFR5 0x0198 //
340 #define ARFR6 0x019C //
341 #define ARFR7 0x01A0 //
342 #define AGGLEN_LMT_H 0x01A7 // Aggregation Length Limit for High-MCS
343 #define AGGLEN_LMT_L 0x01A8 // Aggregation Length Limit for Low-MCS.
344 #define DARFRC 0x01B0 // Data Auto Rate Fallback Retry Count.
345 #define RARFRC 0x01B8 // Response Auto Rate Fallback Count.
346 #define MCS_TXAGC 0x01C0
347 #define CCK_TXAGC 0x01C8
350 // 7. EDCA Setting Registers (Offset: 0x01D0 - 0x01FF)
352 #define EDCAPARA_VO 0x01D0 // EDCA Parameter Register for VO queue.
353 #define EDCAPARA_VI 0x01D4 // EDCA Parameter Register for VI queue.
354 #define EDCAPARA_BE 0x01D8 // EDCA Parameter Register for BE queue.
355 #define EDCAPARA_BK 0x01DC // EDCA Parameter Register for BK queue.
356 #define BCNTCFG 0x01E0 // Beacon Time Configuration Register.
357 #define CWRR 0x01E2 // Contention Window Report Register.
358 #define ACMAVG 0x01E4 // ACM Average Register.
359 #define AcmHwCtrl 0x01E7
360 #define VO_ADMTM 0x01E8 // Admission Time Register.
361 #define VI_ADMTM 0x01EC
362 #define BE_ADMTM 0x01F0
363 #define RETRY_LIMIT 0x01F4 // Retry Limit Registers[15:8]-short, [7:0]-long
364 #define SG_RATE 0x01F6 // Max MCS Rate Available Register, which we Set the hightst SG rate.
367 // 8. WMAC, BA and CCX related Register. (Offset: 0x0200 - 0x023F)
369 #define NAV_CTRL 0x0200
370 #define BW_OPMODE 0x0203
371 #define BACAMCMD 0x0204
372 #define BACAMCONTENT 0x0208 // Block ACK CAM R/W Register.
374 // Roger had defined the 0x2xx register WMAC definition
375 #define LBDLY 0x0210 // Loopback Delay Register.
376 #define FWDLY 0x0211 // FW Delay Register.
377 #define HWPC_RX_CTRL 0x0218 // HW Packet Conversion RX Control Reg
378 #define MQIR 0x0220 // Mesh Qos Type Indication Register.
379 #define MAIR 0x0222 // Mesh ACK.
380 #define MSIR 0x0224 // Mesh HW Security Requirement Indication Reg
381 #define CLM_RESULT 0x0227 // CCA Busy Fraction(Channel Load)
382 #define NHM_RPI_CNT 0x0228 // Noise Histogram Measurement (NHM) RPI Report.
383 #define RXERR_RPT 0x0230 // Rx Error Report.
384 #define NAV_PROT_LEN 0x0234 // NAV Protection Length.
385 #define CFEND_TH 0x0236 // CF-End Threshold.
386 #define AMPDU_MIN_SPACE 0x0237 // AMPDU Min Space.
387 #define TXOP_STALL_CTRL 0x0238
390 // 9. Security Control Registers (Offset: 0x0240 - 0x025F)
392 #define RWCAM 0x0240 //IN 8190 Data Sheet is called CAMcmd
393 #define WCAMI 0x0244 // Software write CAM input content
394 #define RCAMO 0x0248 // Software read/write CAM config
395 #define CAMDBG 0x024C
396 #define SECR 0x0250 //Security Configuration Register
399 // 10. Power Save Control Registers (Offset: 0x0260 - 0x02DF)
401 #define WOW_CTRL 0x0260 //Wake On WLAN Control.
402 #define PSSTATUS 0x0261 // Power Save Status.
403 #define PSSWITCH 0x0262 // Power Save Switch.
404 #define MIMOPS_WAIT_PERIOD 0x0263
405 #define LPNAV_CTRL 0x0264
406 #define WFM0 0x0270 // Wakeup Frame Mask.
407 #define WFM1 0x0280 //
408 #define WFM2 0x0290 //
409 #define WFM3 0x02A0 //
410 #define WFM4 0x02B0 //
411 #define WFM5 0x02C0 // FW Control register.
412 #define WFCRC 0x02D0 // Wakeup Frame CRC.
413 #define RPWM 0x02DC // Host Request Power Mode.
414 #define CPWM 0x02DD // Current Power Mode.
415 #define FW_RPT_REG 0x02c4
418 // 11. General Purpose Registers (Offset: 0x02E0 - 0x02FF)
420 #define PSTIME 0x02E0 // Power Save Timer Register
421 #define TIMER0 0x02E4 //
422 #define TIMER1 0x02E8 //
423 #define GPIO_CTRL 0x02EC // GPIO Control Register
424 #define GPIO_IN 0x02EC // GPIO pins input value
425 #define GPIO_OUT 0x02ED // GPIO pins output value
426 #define GPIO_IO_SEL 0x02EE // GPIO pins output enable when a bit is set to "1"; otherwise, input is configured.
427 #define GPIO_MOD 0x02EF //
428 #define GPIO_INTCTRL 0x02F0 // GPIO Interrupt Control Register[7:0]
429 #define MAC_PINMUX_CFG 0x02F1 // MAC PINMUX Configuration Reg[7:0]
430 #define LEDCFG 0x02F2 // System PINMUX Configuration Reg[7:0]
431 #define PHY_REG 0x02F3 // RPT: PHY REG Access Report Reg[7:0]
432 #define PHY_REG_DATA 0x02F4 // PHY REG Read DATA Register [31:0]
433 #define EFUSE_CLK 0x02F8 // CTRL: E-FUSE Clock Control Reg[7:0]
434 //#define GPIO_INTCTRL 0x02F9 // GPIO Interrupt Control Register[7:0]
437 // 12. Host Interrupt Status Registers (Offset: 0x0300 - 0x030F)
439 #define IMR 0x0300 // Interrupt Mask Register
440 #define ISR 0x0308 // Interrupt Status Register
443 // 13. Test Mode and Debug Control Registers (Offset: 0x0310 - 0x034F)
445 #define DBG_PORT_SWITCH 0x003A
446 #define BIST 0x0310 // Bist reg definition
447 #define DBS 0x0314 // Debug Select ???
448 #define CPUINST 0x0318 // CPU Instruction Read Register
449 #define CPUCAUSE 0x031C // CPU Cause Register
450 #define LBUS_ERR_ADDR 0x0320 // Lexra Bus Error Address Register
451 #define LBUS_ERR_CMD 0x0324 // Lexra Bus Error Command Register
452 #define LBUS_ERR_DATA_L 0x0328 // Lexra Bus Error Data Low DW Register
453 #define LBUS_ERR_DATA_H 0x032C //
454 #define LX_EXCEPTION_ADDR 0x0330 // Lexra Bus Exception Address Register
455 #define WDG_CTRL 0x0334 // Watch Dog Control Register
456 #define INTMTU 0x0338 // Interrupt Mitigation Time Unit Reg
457 #define INTM 0x033A // Interrupt Mitigation Register
458 #define FDLOCKTURN0 0x033C // FW/DRV Lock Turn 0 Register
459 #define FDLOCKTURN1 0x033D // FW/DRV Lock Turn 1 Register
460 #define TRXPKTBUF_DBG_DATA 0x0340 // TRX Packet Buffer Debug Data Register
461 #define TRXPKTBUF_DBG_CTRL 0x0348 // TRX Packet Buffer Debug Control Reg
462 #define DPLL 0x034A // DPLL Monitor Register [15:0]
463 #define CBUS_ERR_ADDR 0x0350 // CPU Bus Error Address Register
464 #define CBUS_ERR_CMD 0x0354 // CPU Bus Error Command Register
465 #define CBUS_ERR_DATA_L 0x0358 // CPU Bus Error Data Low DW Register
466 #define CBUS_ERR_DATA_H 0x035C //
467 #define USB_SIE_INTF_ADDR 0x0360 // USB SIE Access Interface Address Reg
468 #define USB_SIE_INTF_WD 0x0361 // USB SIE Access Interface WData Reg
469 #define USB_SIE_INTF_RD 0x0362 // USB SIE Access Interface RData Reg
470 #define USB_SIE_INTF_CTRL 0x0363 // USB SIE Access Interface Control Reg
475 // 14. PCIE config register (Offset 0x500-)
477 #define TPPoll 0x0500 // Transmit Polling
478 #define PM_CTRL 0x0502 // PCIE power management control Register
479 #define PCIF 0x0503 // PCI Function Register 0x0009h~0x000bh
481 #define THPDA 0x0514 // Transmit High Priority Desc Addr
482 #define TMDA 0x0518 // Transmit Management Desc Addr
483 #define TCDA 0x051C // Transmit Command Desc Addr
484 #define HDA 0x0520 // HCCA Desc Addr
485 #define TVODA 0x0524 // Transmit VO Desc Addr
486 #define TVIDA 0x0528 // Transmit VI Desc Addr
487 #define TBEDA 0x052C // Transmit BE Desc Addr
488 #define TBKDA 0x0530 // Transmit BK Desc Addr
489 #define TBDA 0x0534 // Transmit Beacon Desc Addr
490 #define RCDA 0x0538 // Receive Command Desc Addr
491 #define RDSA 0x053C // Receive Desc Starting Addr
492 #define DBI_WDATA 0x0540 // DBI write data Register
493 #define DBI_RDATA 0x0544 // DBI read data Register
494 #define DBI_CTRL 0x0548 // PCIE DBI control Register
495 #define MDIO_DATA 0x0550 // PCIE MDIO data Register
496 #define MDIO_CTRL 0x0554 // PCIE MDIO control Register
497 #define PCI_RPWM 0x0561 // PCIE RPWM register
498 #define PCI_CPWM 0x0563 // Current Power Mode.
501 // Config register (Offset 0x800-)
503 #define PHY_CCA 0x803 // CCA related register
505 //============================================================================
506 // 8192S USB specific Regsiter Offset and Content definition,
507 // 2008.08.28, added by Roger.
508 //============================================================================
509 // Rx Aggregation time-out reg.
510 #define USB_RX_AGG_TIMEOUT 0xFE5B
512 // Firware reserved Tx page control.
513 #define FW_OFFLOAD_EN BIT7
515 // Min Spacing related settings.
516 #define MAX_MSS_DENSITY 0x13
517 #define MAX_MSS_DENSITY_2T 0x13
518 #define MAX_MSS_DENSITY_1T 0x0A
520 // Rx DMA Control related settings
521 #define RXDMA_AGG_EN BIT7
523 // USB Rx Aggregation TimeOut settings
524 #define RXDMA_AGG_TIMEOUT_DISABLE 0x00
525 #define RXDMA_AGG_TIMEOUT_17MS 0x01
526 #define RXDMA_AGG_TIMEOUT_17_2_MS 0x02
527 #define RXDMA_AGG_TIMEOUT_17_4_MS 0x04
528 #define RXDMA_AGG_TIMEOUT_17_10_MS 0x0A
530 #define USB_RPWM 0xFE58
532 //FIXLZM SVN_BRACH NOT MOD HERE, IF MOD RX IS LITTLE LOW
533 //#if ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==PCI_INTERFACE))
534 //#define RPWM PCI_RPWM
535 //#elif ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==USB_INTERFACE))
536 //#define RPWM USB_RPWM
540 //============================================================================
541 // 8190 Regsiter offset definition
542 //============================================================================
543 #if 1 // Delete the register later
544 #define AFR 0x010 // AutoLoad Function Register
545 #define BCN_TCFG 0x062 // Beacon Time Configuration
546 #define RATR0 0x320 // Rate Adaptive Table register1
548 // TODO: Remove unused register, We must declare backward compatiable
549 //Undefined register set in 8192S. 0x320/350 DW is useless
550 #define UnusedRegister 0x0320
551 #define PSR UnusedRegister // Page Select Register
553 #define DCAM UnusedRegister // Debug CAM Interface
554 //PHY Configuration related
555 #define BBAddr UnusedRegister // Phy register address register
556 #define PhyDataR UnusedRegister // Phy register data read
557 #define UFWP UnusedRegister
560 //============================================================================
561 // 8192S Regsiter Bit and Content definition
562 //============================================================================
565 // 1. System Configuration Registers (Offset: 0x0000 - 0x003F)
567 //----------------------------------------------------------------------------
568 // 8192S SYS_ISO_CTRL bits (Offset 0x0, 16bit)
569 //----------------------------------------------------------------------------
570 #define ISO_MD2PP BIT0 // MACTOP/BB/PCIe Digital to Power On.
571 #define ISO_PA2PCIE BIT3 // PCIe Analog 1.2V to PCIe 3.3V
572 #define ISO_PLL2MD BIT4 // AFE PLL to MACTOP/BB/PCIe Digital.
573 #define ISO_PWC_DV2RP BIT11 // Digital Vdd to Retention Path
574 #define ISO_PWC_RV2RP BIT12 // LPLDOR12 to Retenrion Path, 1: isolation, 0: attach.
576 //----------------------------------------------------------------------------
577 // 8192S SYS_FUNC_EN bits (Offset 0x2, 16bit)
578 //----------------------------------------------------------------------------
579 #define FEN_MREGEN BIT15 // MAC I/O Registers Enable.
580 #define FEN_DCORE BIT11 // Enable Core Digital.
581 #define FEN_CPUEN BIT10 // Enable CPU Core Digital.
582 // 8192S PMC_FSM bits (Offset 0x4, 32bit)
583 //----------------------------------------------------------------------------
584 #define PAD_HWPD_IDN BIT22 // HWPDN PAD status Indicator
586 //----------------------------------------------------------------------------
588 //----------------------------------------------------------------------------
589 // 8192S SYS_CLKR bits (Offset 0x8, 16bit)
590 //----------------------------------------------------------------------------
591 #define SYS_CLKSEL_80M BIT0 // System Clock 80MHz
592 #define SYS_PS_CLKSEL BIT1 //System power save clock select.
593 #define SYS_CPU_CLKSEL BIT2 // System Clock select, 1: AFE source, 0: System clock(L-Bus)
594 #define SYS_MAC_CLK_EN BIT11 // MAC Clock Enable.
595 #define SYS_SWHW_SEL BIT14 // Load done, control path seitch.
596 #define SYS_FWHW_SEL BIT15 // Sleep exit, control path swith.
599 //----------------------------------------------------------------------------
600 // 8192S Cmd9346CR bits (Offset 0xA, 16bit)
601 //----------------------------------------------------------------------------
602 #define CmdEEPROM_En BIT5 // EEPROM enable when set 1
603 #define CmdEERPOMSEL BIT4 // System EEPROM select, 0: boot from E-FUSE, 1: The EEPROM used is 9346
604 #define Cmd9346CR_9356SEL BIT4
605 #define AutoLoadEEPROM (CmdEEPROM_En|CmdEERPOMSEL)
606 #define AutoLoadEFUSE CmdEEPROM_En
609 //----------------------------------------------------------------------------
610 // 8192S AFE_MISC bits AFE Misc (Offset 0x10, 8bits)
611 //----------------------------------------------------------------------------
612 #define AFE_MBEN BIT1 // Enable AFE Macro Block's Mbias.
613 #define AFE_BGEN BIT0 // Enable AFE Macro Block's Bandgap.
615 //----------------------------------------------------------------------------
616 // 8192S SPS1_CTRL bits (Offset 0x18-1E, 56bits)
617 //----------------------------------------------------------------------------
618 #define SPS1_SWEN BIT1 // Enable vsps18 SW Macro Block.
619 #define SPS1_LDEN BIT0 // Enable VSPS12 LDO Macro block.
621 //----------------------------------------------------------------------------
622 // 8192S RF_CTRL bits (Offset 0x1F, 8bits)
623 //----------------------------------------------------------------------------
624 #define RF_EN BIT0 // Enable RF module.
625 #define RF_RSTB BIT1 // Reset RF module.
626 #define RF_SDMRSTB BIT2 // Reset RF SDM module.
628 //----------------------------------------------------------------------------
629 // 8192S LDOA15_CTRL bits (Offset 0x20, 8bits)
630 //----------------------------------------------------------------------------
631 #define LDA15_EN BIT0 // Enable LDOA15 Macro Block
633 //----------------------------------------------------------------------------
634 // 8192S LDOV12D_CTRL bits (Offset 0x21, 8bits)
635 //----------------------------------------------------------------------------
636 #define LDV12_EN BIT0 // Enable LDOVD12 Macro Block
637 #define LDV12_SDBY BIT1 // LDOVD12 standby mode
639 //----------------------------------------------------------------------------
640 // 8192S AFE_XTAL_CTRL bits AFE Crystal Control. (Offset 0x26,16bits)
641 //----------------------------------------------------------------------------
642 #define XTAL_GATE_AFE BIT10
643 // Gated Control. 1: AFE Clock source gated, 0: Clock enable.
645 //----------------------------------------------------------------------------
646 // 8192S AFE_PLL_CTRL bits System Function Enable (Offset 0x28,64bits)
647 //----------------------------------------------------------------------------
648 #define APLL_EN BIT0 // Enable AFE PLL Macro Block.
650 // Find which card bus type
651 #define AFR_CardBEn BIT0
652 #define AFR_CLKRUN_SEL BIT1
653 #define AFR_FuncRegEn BIT2
656 // 2. Command Control Registers (Offset: 0x0040 - 0x004F)
658 //----------------------------------------------------------------------------
659 // 8192S (CMD) command register bits (Offset 0x40, 16 bits)
660 //----------------------------------------------------------------------------
661 #define APSDOFF_STATUS BIT15 //
662 #define APSDOFF BIT14 //
663 #define BBRSTn BIT13 //Enable OFDM/CCK
664 #define BB_GLB_RSTn BIT12 //Enable BB
665 #define SCHEDULE_EN BIT10 //Enable MAC scheduler
666 #define MACRXEN BIT9 //
667 #define MACTXEN BIT8 //
668 #define DDMA_EN BIT7 //FW off load function enable
669 #define FW2HW_EN BIT6 //MAC every module reset as below
670 #define RXDMA_EN BIT5 //
671 #define TXDMA_EN BIT4 //
672 #define HCI_RXDMA_EN BIT3 //
673 #define HCI_TXDMA_EN BIT2 //
675 //----------------------------------------------------------------------------
676 // 8192S (TXPAUSE) transmission pause (Offset 0x42, 8 bits)
677 //----------------------------------------------------------------------------
678 #define StopHCCA BIT6
679 #define StopHigh BIT5
686 //----------------------------------------------------------------------------
687 // 8192S (LBKMD) LoopBack Mode Select (Offset 0x43, 8 bits)
688 //----------------------------------------------------------------------------
690 // [3] no buffer, 1: no delay, 0: delay; [2] dmalbk, [1] no_txphy, [0] diglbk.
692 // 1011: MAC loopback (involving CPU)
693 // 0011: MAC Delay Loopback
694 // 0001: PHY loopback (not yet implemented)
695 // 0111: DMA loopback (only uses TxPktBuffer and DMA engine)
696 // All other combinations are reserved.
699 #define LBK_NORMAL 0x00
700 #define LBK_MAC_LB (BIT0|BIT1|BIT3)
701 #define LBK_MAC_DLB (BIT0|BIT1)
702 #define LBK_DMA_LB (BIT0|BIT1|BIT2)
704 //----------------------------------------------------------------------------
705 // 8192S (TCR) transmission Configuration Register (Offset 0x44, 32 bits)
706 //----------------------------------------------------------------------------
707 #define TCP_OFDL_EN BIT25 //For CE packet conversion
708 #define HWPC_TX_EN BIT24 //""
709 #define TXDMAPRE2FULL BIT23 //TXDMA enable pre2full sync
710 #define DISCW BIT20 //CW disable
711 #define TCRICV BIT19 //Append ICV or not
712 #define CfendForm BIT17 //AP mode
713 #define TCRCRC BIT16 //Append CRC32
714 #define FAKE_IMEM_EN BIT15 //
715 #define TSFRST BIT9 //
716 #define TSFEN BIT8 //
717 // For TCR FW download ready --> write by FW Bit0-7 must all one
718 #define FWALLRDY (BIT0|BIT1|BIT2|BIT3|BIT4|BIT5|BIT6|BIT7)
722 #define DMEM_CODE_DONE BIT4
723 #define EXT_IMEM_CHK_RPT BIT3
724 #define EXT_IMEM_CODE_DONE BIT2
725 #define IMEM_CHK_RPT BIT1
726 #define IMEM_CODE_DONE BIT0
727 // Copy fomr 92SU definition
728 #define IMEM_CODE_DONE BIT0
729 #define IMEM_CHK_RPT BIT1
730 #define EMEM_CODE_DONE BIT2
731 #define EMEM_CHK_RPT BIT3
732 #define DMEM_CODE_DONE BIT4
733 #define IMEM_RDY BIT5
736 #define LOAD_FW_READY (IMEM_CODE_DONE|IMEM_CHK_RPT|EMEM_CODE_DONE|\
737 EMEM_CHK_RPT|DMEM_CODE_DONE|IMEM_RDY|BASECHG|\
739 #define TCR_TSFEN BIT8 // TSF function on or off.
740 #define TCR_TSFRST BIT9 // Reset TSF function to zero.
741 #define TCR_FAKE_IMEM_EN BIT15
742 #define TCR_CRC BIT16
743 #define TCR_ICV BIT19 // Integrity Check Value.
744 #define TCR_DISCW BIT20 // Disable Contention Windows Backoff.
745 #define TCR_HWPC_TX_EN BIT24
746 #define TCR_TCP_OFDL_EN BIT25
747 #define TXDMA_INIT_VALUE (IMEM_CHK_RPT|EXT_IMEM_CHK_RPT)
748 //----------------------------------------------------------------------------
749 // 8192S (RCR) Receive Configuration Register (Offset 0x48, 32 bits)
750 //----------------------------------------------------------------------------
751 #define RCR_APPFCS BIT31 //WMAC append FCS after pauload
752 #define RCR_DIS_ENC_2BYTE BIT30 //HW encrypt 2 or 1 byte mode
753 #define RCR_DIS_AES_2BYTE BIT29 //
754 #define RCR_HTC_LOC_CTRL BIT28 //MFC<--HTC=1 MFC-->HTC=0
755 #define RCR_ENMBID BIT27 //Enable Multiple BssId.
756 #define RCR_RX_TCPOFDL_EN BIT26 //
757 #define RCR_APP_PHYST_RXFF BIT25 //
758 #define RCR_APP_PHYST_STAFF BIT24 //
759 #define RCR_CBSSID BIT23 //Accept BSSID match packet
760 #define RCR_APWRMGT BIT22 //Accept power management packet
761 #define RCR_ADD3 BIT21 //Accept address 3 match packet
762 #define RCR_AMF BIT20 //Accept management type frame
763 #define RCR_ACF BIT19 //Accept control type frame
764 #define RCR_ADF BIT18 //Accept data type frame
765 #define RCR_APP_MIC BIT17 //
766 #define RCR_APP_ICV BIT16 //
767 #define RCR_RXFTH BIT13 //Rx FIFO Threshold Bot 13 - 15
768 #define RCR_AICV BIT12 //Accept ICV error packet
769 #define RCR_RXDESC_LK_EN BIT11 //Accept to update rx desc length
770 #define RCR_APP_BA_SSN BIT6 //Accept BA SSN
771 #define RCR_ACRC32 BIT5 //Accept CRC32 error packet
772 #define RCR_RXSHFT_EN BIT4 //Accept broadcast packet
773 #define RCR_AB BIT3 //Accept broadcast packet
774 #define RCR_AM BIT2 //Accept multicast packet
775 #define RCR_APM BIT1 //Accept physical match packet
776 #define RCR_AAP BIT0 //Accept all unicast packet
777 #define RCR_MXDMA_OFFSET 8
778 #define RCR_FIFO_OFFSET 13
782 #define RCR_ONLYERLPKT BIT31 // Early Receiving based on Packet Size.
783 #define RCR_ENCS2 BIT30 // Enable Carrier Sense Detection Method 2
784 #define RCR_ENCS1 BIT29 // Enable Carrier Sense Detection Method 1
785 #define RCR_ACKTXBW (BIT24|BIT25) // TXBW Setting of ACK frames
787 //----------------------------------------------------------------------------
788 // 8192S (MSR) Media Status Register (Offset 0x4C, 8 bits)
789 //----------------------------------------------------------------------------
793 01: Link in ad hoc network
794 10: Link in infrastructure network
798 #define MSR_NOLINK 0x00
799 #define MSR_ADHOC 0x01
800 #define MSR_INFRA 0x02
803 //----------------------------------------------------------------------------
804 // 8192S (SYSF_CFG) system Fucntion Config Reg (Offset 0x4D, 8 bits)
805 //----------------------------------------------------------------------------
808 #define BTMODE (BIT2|BIT1)
811 //----------------------------------------------------------------------------
812 // 8192S (MBIDCTRL) MBSSID Control Register (Offset 0x4F, 8 bits)
813 //----------------------------------------------------------------------------
815 #define BCNUM (BIT6|BIT5|BIT4)
818 // 3. MACID Setting Registers (Offset: 0x0050 - 0x007F)
822 // 4. Timing Control Registers (Offset: 0x0080 - 0x009F)
824 //----------------------------------------------------------------------------
825 // 8192S (USTIME) US Time Tunning Register (Offset 0x8A, 16 bits)
826 //----------------------------------------------------------------------------
827 #define USTIME_EDCA 0xFF00
828 #define USTIME_TSF 0x00FF
830 //----------------------------------------------------------------------------
831 // 8192S (SIFS_CCK/OFDM) US Time Tunning Register (Offset 0x8C/8E,16 bits)
832 //----------------------------------------------------------------------------
833 #define SIFS_TRX 0xFF00
834 #define SIFS_CTX 0x00FF
836 //----------------------------------------------------------------------------
837 // 8192S (DRVERLYINT) Driver Early Interrupt Reg (Offset 0x98, 16bit)
838 //----------------------------------------------------------------------------
839 #define ENSWBCN BIT15
840 #define DRVERLY_TU 0x0FF0
841 #define DRVERLY_US 0x000F
842 #define BCN_TCFG_CW_SHIFT 8
843 #define BCN_TCFG_IFS 0
846 // 5. FIFO Control Registers (Offset: 0x00A0 - 0x015F)
850 // 6. Adaptive Control Registers (Offset: 0x0160 - 0x01CF)
852 //----------------------------------------------------------------------------
853 // 8192S Response Rate Set Register (offset 0x181, 24bits)
854 //----------------------------------------------------------------------------
855 #define RRSR_RSC_OFFSET 21
856 #define RRSR_SHORT_OFFSET 23
857 #define RRSR_RSC_BW_40M 0x600000
858 #define RRSR_RSC_UPSUBCHNL 0x400000
859 #define RRSR_RSC_LOWSUBCHNL 0x200000
860 #define RRSR_SHORT 0x800000
863 #define RRSR_5_5M BIT2
864 #define RRSR_11M BIT3
867 #define RRSR_12M BIT6
868 #define RRSR_18M BIT7
869 #define RRSR_24M BIT8
870 #define RRSR_36M BIT9
871 #define RRSR_48M BIT10
872 #define RRSR_54M BIT11
873 #define RRSR_MCS0 BIT12
874 #define RRSR_MCS1 BIT13
875 #define RRSR_MCS2 BIT14
876 #define RRSR_MCS3 BIT15
877 #define RRSR_MCS4 BIT16
878 #define RRSR_MCS5 BIT17
879 #define RRSR_MCS6 BIT18
880 #define RRSR_MCS7 BIT19
881 #define BRSR_AckShortPmb BIT23
883 #define RRSR_RSC_UPSUBCHANL 0x200000
884 // CCK ACK: use Short Preamble or not
886 //----------------------------------------------------------------------------
887 // 8192S Rate Definition
888 //----------------------------------------------------------------------------
890 #define RATR_1M 0x00000001
891 #define RATR_2M 0x00000002
892 #define RATR_55M 0x00000004
893 #define RATR_11M 0x00000008
895 #define RATR_6M 0x00000010
896 #define RATR_9M 0x00000020
897 #define RATR_12M 0x00000040
898 #define RATR_18M 0x00000080
899 #define RATR_24M 0x00000100
900 #define RATR_36M 0x00000200
901 #define RATR_48M 0x00000400
902 #define RATR_54M 0x00000800
903 //MCS 1 Spatial Stream
904 #define RATR_MCS0 0x00001000
905 #define RATR_MCS1 0x00002000
906 #define RATR_MCS2 0x00004000
907 #define RATR_MCS3 0x00008000
908 #define RATR_MCS4 0x00010000
909 #define RATR_MCS5 0x00020000
910 #define RATR_MCS6 0x00040000
911 #define RATR_MCS7 0x00080000
912 //MCS 2 Spatial Stream
913 #define RATR_MCS8 0x00100000
914 #define RATR_MCS9 0x00200000
915 #define RATR_MCS10 0x00400000
916 #define RATR_MCS11 0x00800000
917 #define RATR_MCS12 0x01000000
918 #define RATR_MCS13 0x02000000
919 #define RATR_MCS14 0x04000000
920 #define RATR_MCS15 0x08000000
922 #define RATE_ALL_CCK RATR_1M|RATR_2M|RATR_55M|RATR_11M
923 #define RATE_ALL_OFDM_AG RATR_6M|RATR_9M|RATR_12M|RATR_18M|RATR_24M|\
924 RATR_36M|RATR_48M|RATR_54M
925 #define RATE_ALL_OFDM_1SS RATR_MCS0|RATR_MCS1|RATR_MCS2|RATR_MCS3 |\
926 RATR_MCS4|RATR_MCS5|RATR_MCS6 |RATR_MCS7
927 #define RATE_ALL_OFDM_2SS RATR_MCS8|RATR_MCS9 |RATR_MCS10|RATR_MCS11|\
928 RATR_MCS12|RATR_MCS13|RATR_MCS14|RATR_MCS15
931 // 7. EDCA Setting Registers (Offset: 0x01D0 - 0x01FF)
933 //----------------------------------------------------------------------------
934 // 8192S EDCA Setting (offset 0x1D0-1DF, 4DW VO/VI/BE/BK)
935 //----------------------------------------------------------------------------
936 #define AC_PARAM_TXOP_LIMIT_OFFSET 16
937 #define AC_PARAM_ECW_MAX_OFFSET 12
938 #define AC_PARAM_ECW_MIN_OFFSET 8
939 #define AC_PARAM_AIFS_OFFSET 0
941 //----------------------------------------------------------------------------
942 // 8192S AcmHwCtrl bits (offset 0x1E7, 1 byte)
943 //----------------------------------------------------------------------------
944 #define AcmHw_HwEn BIT0
945 #define AcmHw_BeqEn BIT1
946 #define AcmHw_ViqEn BIT2
947 #define AcmHw_VoqEn BIT3
948 #define AcmHw_BeqStatus BIT4
949 #define AcmHw_ViqStatus BIT5
950 #define AcmHw_VoqStatus BIT6
952 //----------------------------------------------------------------------------
953 // 8192S Retry Limit (Offset 0x1F4, 16bit)
954 //----------------------------------------------------------------------------
955 #define RETRY_LIMIT_SHORT_SHIFT 8
956 #define RETRY_LIMIT_LONG_SHIFT 0
959 // 8. WMAC, BA and CCX related Register. (Offset: 0x0200 - 0x023F)
961 //----------------------------------------------------------------------------
962 // 8192S NAV_CTRL bits (Offset 0x200, 24bit)
963 //----------------------------------------------------------------------------
964 #define NAV_UPPER_EN BIT16
965 #define NAV_UPPER 0xFF00
966 #define NAV_RTSRST 0xFF
967 //----------------------------------------------------------------------------
968 // 8192S BW_OPMODE bits (Offset 0x203, 8bit)
969 //----------------------------------------------------------------------------
970 #define BW_OPMODE_20MHZ BIT2
971 #define BW_OPMODE_5G BIT1
972 #define BW_OPMODE_11J BIT0
973 //----------------------------------------------------------------------------
974 // 8192S BW_OPMODE bits (Offset 0x230, 4 Byte)
975 //----------------------------------------------------------------------------
976 #define RXERR_RPT_RST BIT27 // Write "one" to set the counter to zero.
978 #define RXERR_OFDM_PPDU 0
979 #define RXERR_OFDM_FALSE_ALARM 1
980 #define RXERR_OFDM_MPDU_OK 2
981 #define RXERR_OFDM_MPDU_FAIL 3
982 #define RXERR_CCK_PPDU 4
983 #define RXERR_CCK_FALSE_ALARM 5
984 #define RXERR_CCK_MPDU_OK 6
985 #define RXERR_CCK_MPDU_FAIL 7
986 #define RXERR_HT_PPDU 8
987 #define RXERR_HT_FALSE_ALARM 9
988 #define RXERR_HT_MPDU_TOTAL 10
989 #define RXERR_HT_MPDU_OK 11
990 #define RXERR_HT_MPDU_FAIL 12
991 #define RXERR_RX_FULL_DROP 15
994 // 9. Security Control Registers (Offset: 0x0240 - 0x025F)
996 //----------------------------------------------------------------------------
997 // 8192S RWCAM CAM Command Register (offset 0x240, 4 byte)
998 //----------------------------------------------------------------------------
999 #define CAM_CM_SecCAMPolling BIT31 //Security CAM Polling
1000 #define CAM_CM_SecCAMClr BIT30 //Clear all bits in CAM
1001 #define CAM_CM_SecCAMWE BIT16 //Security CAM enable
1002 #define CAM_ADDR 0xFF //CAM Address Offset
1004 //----------------------------------------------------------------------------
1005 // 8192S CAMDBG Debug CAM Register (offset 0x24C, 4 byte)
1006 //----------------------------------------------------------------------------
1007 #define Dbg_CAM_TXSecCAMInfo BIT31 //Retrieve lastest Tx Info
1008 #define Dbg_CAM_SecKeyFound BIT30 //Security KEY Found
1011 //----------------------------------------------------------------------------
1012 // 8192S SECR Security Configuration Register (offset 0x250, 1 byte)
1013 //----------------------------------------------------------------------------
1014 #define SCR_TxUseDK BIT0 //Force Tx Use Default Key
1015 #define SCR_RxUseDK BIT1 //Force Rx Use Default Key
1016 #define SCR_TxEncEnable BIT2 //Enable Tx Encryption
1017 #define SCR_RxDecEnable BIT3 //Enable Rx Decryption
1018 #define SCR_SKByA2 BIT4 //Search kEY BY A2
1019 #define SCR_NoSKMC BIT5 //No Key Search Multicast
1020 //----------------------------------------------------------------------------
1021 // 8192S CAM Config Setting (offset 0x250, 1 byte)
1022 //----------------------------------------------------------------------------
1023 #define CAM_VALID BIT15
1024 #define CAM_NOTVALID 0x0000
1025 #define CAM_USEDK BIT5
1027 #define CAM_NONE 0x0
1028 #define CAM_WEP40 0x01
1029 #define CAM_TKIP 0x02
1030 #define CAM_AES 0x04
1031 #define CAM_WEP104 0x05
1033 #define TOTAL_CAM_ENTRY 32
1035 #define CAM_CONFIG_USEDK TRUE
1036 #define CAM_CONFIG_NO_USEDK FALSE
1038 #define CAM_WRITE BIT16
1039 #define CAM_READ 0x00000000
1040 #define CAM_POLLINIG BIT31
1042 #define SCR_UseDK 0x01
1043 #define SCR_TxSecEnable 0x02
1044 #define SCR_RxSecEnable 0x04
1047 // 10. Power Save Control Registers (Offset: 0x0260 - 0x02DF)
1049 #define WOW_PMEN BIT0 // Power management Enable.
1050 #define WOW_WOMEN BIT1 // WoW function on or off.
1051 #define WOW_MAGIC BIT2 // Magic packet
1052 #define WOW_UWF BIT3 // Unicast Wakeup frame.
1055 // 11. General Purpose Registers (Offset: 0x02E0 - 0x02FF)
1056 // 8192S GPIO Config Setting (offset 0x2F1, 1 byte)
1057 //----------------------------------------------------------------------------
1058 #define GPIOMUX_EN BIT3 // When this bit is set to "1", GPIO PINs will switch to MAC GPIO Function
1059 #define GPIOSEL_GPIO 0 // UART or JTAG or pure GPIO
1060 #define GPIOSEL_PHYDBG 1 // PHYDBG
1061 #define GPIOSEL_BT 2 // BT_coex
1062 #define GPIOSEL_WLANDBG 3 // WLANDBG
1063 #define GPIOSEL_GPIO_MASK ~(BIT0|BIT1)
1065 //----------------------------------------------------------------------------
1067 //----------------------------------------------------------------------------
1068 // PHY REG Access Report Register definition
1069 //----------------------------------------------------------------------------
1070 #define HST_RDBUSY BIT0
1071 #define CPU_WTBUSY BIT1
1074 // 12. Host Interrupt Status Registers (Offset: 0x0300 - 0x030F)
1076 //----------------------------------------------------------------------------
1077 // 8190 IMR/ISR bits (offset 0xfd, 8bits)
1078 //----------------------------------------------------------------------------
1079 #define IMR8190_DISABLED 0x0
1082 #define IMR_CPUERR BIT5 // CPU error interrupt
1083 #define IMR_ATIMEND BIT4 // ATIM Window End Interrupt
1084 #define IMR_TBDOK BIT3 // Transmit Beacon OK Interrupt
1085 #define IMR_TBDER BIT2 // Transmit Beacon Error Interrupt
1086 #define IMR_BCNDMAINT8 BIT1 // Beacon DMA Interrupt 8
1087 #define IMR_BCNDMAINT7 BIT0 // Beacon DMA Interrupt 7
1090 #define IMR_BCNDMAINT6 BIT31 // Beacon DMA Interrupt 6
1091 #define IMR_BCNDMAINT5 BIT30 // Beacon DMA Interrupt 5
1092 #define IMR_BCNDMAINT4 BIT29 // Beacon DMA Interrupt 4
1093 #define IMR_BCNDMAINT3 BIT28 // Beacon DMA Interrupt 3
1094 #define IMR_BCNDMAINT2 BIT27 // Beacon DMA Interrupt 2
1095 #define IMR_BCNDMAINT1 BIT26 // Beacon DMA Interrupt 1
1096 #define IMR_BCNDOK8 BIT25 // Beacon Queue DMA OK Interrup 8
1097 #define IMR_BCNDOK7 BIT24 // Beacon Queue DMA OK Interrup 7
1098 #define IMR_BCNDOK6 BIT23 // Beacon Queue DMA OK Interrup 6
1099 #define IMR_BCNDOK5 BIT22 // Beacon Queue DMA OK Interrup 5
1100 #define IMR_BCNDOK4 BIT21 // Beacon Queue DMA OK Interrup 4
1101 #define IMR_BCNDOK3 BIT20 // Beacon Queue DMA OK Interrup 3
1102 #define IMR_BCNDOK2 BIT19 // Beacon Queue DMA OK Interrup 2
1103 #define IMR_BCNDOK1 BIT18 // Beacon Queue DMA OK Interrup 1
1104 #define IMR_TIMEOUT2 BIT17 // Timeout interrupt 2
1105 #define IMR_TIMEOUT1 BIT16 // Timeout interrupt 1
1106 #define IMR_TXFOVW BIT15 // Transmit FIFO Overflow
1107 #define IMR_PSTIMEOUT BIT14 // Power save time out interrupt
1108 #define IMR_BcnInt BIT13 // Beacon DMA Interrupt 0
1109 #define IMR_RXFOVW BIT12 // Receive FIFO Overflow
1110 #define IMR_RDU BIT11 // Receive Descriptor Unavailable
1111 #define IMR_RXCMDOK BIT10 // Receive Command Packet OK
1112 #define IMR_BDOK BIT9 // Beacon Queue DMA OK Interrup
1113 #define IMR_HIGHDOK BIT8 // High Queue DMA OK Interrupt
1114 #define IMR_COMDOK BIT7 // Command Queue DMA OK Interrupt
1115 #define IMR_MGNTDOK BIT6 // Management Queue DMA OK Interrupt
1116 #define IMR_HCCADOK BIT5 // HCCA Queue DMA OK Interrupt
1117 #define IMR_BKDOK BIT4 // AC_BK DMA OK Interrupt
1118 #define IMR_BEDOK BIT3 // AC_BE DMA OK Interrupt
1119 #define IMR_VIDOK BIT2 // AC_VI DMA OK Interrupt
1120 #define IMR_VODOK BIT1 // AC_VO DMA Interrupt
1121 #define IMR_ROK BIT0 // Receive DMA OK Interrupt
1124 // 13. Test Mode and Debug Control Registers (Offset: 0x0310 - 0x034F)
1128 // 14. PCIE config register (Offset 0x500-)
1130 //----------------------------------------------------------------------------
1131 // 8190 TPPool bits (offset 0xd9, 2 byte)
1132 //----------------------------------------------------------------------------
1133 #define TPPoll_BKQ BIT0 // BK queue polling
1134 #define TPPoll_BEQ BIT1 // BE queue polling
1135 #define TPPoll_VIQ BIT2 // VI queue polling
1136 #define TPPoll_VOQ BIT3 // VO queue polling
1137 #define TPPoll_BQ BIT4 // Beacon queue polling
1138 #define TPPoll_CQ BIT5 // Command queue polling
1139 #define TPPoll_MQ BIT6 // Management queue polling
1140 #define TPPoll_HQ BIT7 // High queue polling
1141 #define TPPoll_HCCAQ BIT8 // HCCA queue polling
1142 #define TPPoll_StopBK BIT9 // Stop BK queue
1143 #define TPPoll_StopBE BIT10 // Stop BE queue
1144 #define TPPoll_StopVI BIT11 // Stop VI queue
1145 #define TPPoll_StopVO BIT12 // Stop VO queue
1146 #define TPPoll_StopMgt BIT13 // Stop Mgnt queue
1147 #define TPPoll_StopHigh BIT14 // Stop High queue
1148 #define TPPoll_StopHCCA BIT15 // Stop HCCA queue
1149 #define TPPoll_SHIFT 8 // Queue ID mapping
1151 //----------------------------------------------------------------------------
1152 // 8192S PCIF (Offset 0x500, 32bit)
1153 //----------------------------------------------------------------------------
1154 #define MXDMA2_16bytes 0x000
1155 #define MXDMA2_32bytes 0x001
1156 #define MXDMA2_64bytes 0x010
1157 #define MXDMA2_128bytes 0x011
1158 #define MXDMA2_256bytes 0x100
1159 #define MXDMA2_512bytes 0x101
1160 #define MXDMA2_1024bytes 0x110
1161 #define MXDMA2_NoLimit 0x7
1163 #define MULRW_SHIFT 3
1164 #define MXDMA2_RX_SHIFT 4
1165 #define MXDMA2_TX_SHIFT 0
1167 //----------------------------------------------------------------------------
1168 // 8190 CCX_COMMAND_REG Setting (offset 0x25A, 1 byte)
1169 //----------------------------------------------------------------------------
1170 #define CCX_CMD_CLM_ENABLE BIT0 // Enable Channel Load
1171 #define CCX_CMD_NHM_ENABLE BIT1 // Enable Noise Histogram
1172 #define CCX_CMD_FUNCTION_ENABLE BIT8
1173 // CCX function (Channel Load/RPI/Noise Histogram).
1174 #define CCX_CMD_IGNORE_CCA BIT9
1175 // Treat CCA period as IDLE time for NHM.
1176 #define CCX_CMD_IGNORE_TXON BIT10
1177 // Treat TXON period as IDLE time for NHM.
1178 #define CCX_CLM_RESULT_READY BIT16
1179 // 1: Indicate the result of Channel Load is ready.
1180 #define CCX_NHM_RESULT_READY BIT16
1181 // 1: Indicate the result of Noise histogram is ready.
1182 #define CCX_CMD_RESET 0x0
1183 // Clear all the result of CCX measurement and disable the CCX function.
1186 //----------------------------------------------------------------------------
1188 //----------------------------------------------------------------------------
1189 //#define HWSET_MAX_SIZE_92S 128
1192 //----------------------------------------------------------------------------
1193 // 8192S EEPROM/EFUSE share register definition.
1194 //----------------------------------------------------------------------------
1196 //----------------------------------------------------------------------------
1197 // 8192S EEROM and Compatible E-Fuse definition. Added by Roger, 2008.10.21.
1198 //----------------------------------------------------------------------------
1199 #define RTL8190_EEPROM_ID 0x8129
1200 #define EEPROM_HPON 0x02 // LDO settings.
1201 #define EEPROM_VID 0x08 // USB Vendor ID.
1202 #define EEPROM_PID 0x0A // USB Product ID.
1203 #define EEPROM_USB_OPTIONAL 0x0C // For optional function.
1204 #define EEPROM_USB_PHY_PARA1 0x0D // For fine tune USB PHY.
1205 #define EEPROM_NODE_ADDRESS_BYTE_0 0x12 // MAC address.
1206 #define EEPROM_TxPowerDiff 0x1F
1208 #define EEPROM_Version 0x50
1209 #define EEPROM_ChannelPlan 0x51 // Map of supported channels.
1210 #define EEPROM_CustomID 0x52
1211 #define EEPROM_SubCustomID 0x53 // Reserved for customer use.
1214 // <Roger_Notes> The followin are for different version of EEPROM contents purpose. 2008.11.22.
1215 #define EEPROM_BoardType 0x54 //0x0: RTL8188SU, 0x1: RTL8191SU, 0x2: RTL8192SU, 0x3: RTL8191GU
1216 #define EEPROM_TxPwIndex 0x55 //0x55-0x66, Tx Power index.
1217 #define EEPROM_PwDiff 0x67 // Difference of gain index between legacy and high throughput OFDM.
1218 #define EEPROM_ThermalMeter 0x68 // Thermal meter default value.
1219 #define EEPROM_CrystalCap 0x69 // Crystal Cap.
1220 #define EEPROM_TxPowerBase 0x6a // Tx Power of serving station.
1221 #define EEPROM_TSSI_A 0x6b //TSSI value of path A.
1222 #define EEPROM_TSSI_B 0x6c //TSSI value of path B.
1223 #define EEPROM_TxPwTkMode 0x6d //Tx Power tracking mode.
1224 //#define EEPROM_Reserved 0x6e //0x6e-0x7f, reserved.
1226 // 2009/02/09 Cosa Add for SD3 requirement
1227 #define EEPROM_TX_PWR_HT20_DIFF 0x6e// HT20 Tx Power Index Difference
1228 #define DEFAULT_HT20_TXPWR_DIFF 2 // HT20<->40 default Tx Power Index Difference
1229 #define EEPROM_TX_PWR_OFDM_DIFF 0x71// OFDM Tx Power Index Difference
1230 #define EEPROM_TX_PWR_BAND_EDGE 0x73// TX Power offset at band-edge channel
1231 #define TX_PWR_BAND_EDGE_CHK 0x79// Check if band-edge scheme is enabled
1232 #define EEPROM_Default_LegacyHTTxPowerDiff 0x3
1233 #define EEPROM_USB_Default_OPTIONAL_FUNC 0x8
1234 #define EEPROM_USB_Default_PHY_PARAM 0x0
1235 #define EEPROM_Default_TSSI 0x0
1236 #define EEPROM_Default_TxPwrTkMode 0x0
1237 #define EEPROM_Default_TxPowerDiff 0x0
1238 #define EEPROM_Default_TxPowerBase 0x0
1239 #define EEPROM_Default_ThermalMeter 0x7
1240 #define EEPROM_Default_PwDiff 0x4
1241 #define EEPROM_Default_CrystalCap 0x5
1242 #define EEPROM_Default_TxPower 0x1010
1243 #define EEPROM_Default_BoardType 0x02 // Default: 2X2, RTL8192SU(QFPN68)
1244 #define EEPROM_Default_HT2T_TxPwr 0x10
1245 #define EEPROM_USB_SN BIT0
1246 #define EEPROM_USB_REMOTE_WAKEUP BIT1
1247 #define EEPROM_USB_DEVICE_PWR BIT2
1248 #define EEPROM_EP_NUMBER (BIT3|BIT4)
1250 #define EEPROM_CHANNEL_PLAN_FCC 0x0
1251 #define EEPROM_CHANNEL_PLAN_IC 0x1
1252 #define EEPROM_CHANNEL_PLAN_ETSI 0x2
1253 #define EEPROM_CHANNEL_PLAN_SPAIN 0x3
1254 #define EEPROM_CHANNEL_PLAN_FRANCE 0x4
1255 #define EEPROM_CHANNEL_PLAN_MKK 0x5
1256 #define EEPROM_CHANNEL_PLAN_MKK1 0x6
1257 #define EEPROM_CHANNEL_PLAN_ISRAEL 0x7
1258 #define EEPROM_CHANNEL_PLAN_TELEC 0x8
1259 #define EEPROM_CHANNEL_PLAN_GLOBAL_DOMAIN 0x9
1260 #define EEPROM_CHANNEL_PLAN_WORLD_WIDE_13 0xA
1261 #define EEPROM_CHANNEL_PLAN_BY_HW_MASK 0x80
1263 #define EEPROM_CID_DEFAULT 0x0
1264 #define EEPROM_CID_ALPHA 0x1
1265 #define EEPROM_CID_CAMEO 0X8
1266 #define EEPROM_CID_SITECOM 0x9
1268 //#define EEPROM_CID_RUNTOP 0x2
1269 //#define EEPROM_CID_Senao 0x3
1270 //#define EEPROM_CID_TOSHIBA 0x4
1271 //#define EEPROM_CID_NetCore 0x5
1272 #define EEPROM_CID_WHQL 0xFE // added by chiyoko for dtm, 20090108
1274 //-----------------------------------------------------------------
1275 // 0x2c0 FW Command Control register definition, added by Roger, 2008.11.27.
1276 //-----------------------------------------------------------------
1277 #define FW_DIG_DISABLE 0xfd00cc00
1278 #define FW_DIG_ENABLE 0xfd000000
1279 #define FW_DIG_HALT 0xfd000001
1280 #define FW_DIG_RESUME 0xfd000002
1281 #define FW_HIGH_PWR_DISABLE 0xfd000008
1282 #define FW_HIGH_PWR_ENABLE 0xfd000009
1283 #define FW_TXPWR_TRACK_ENABLE 0xfd000017
1284 #define FW_TXPWR_TRACK_DISABLE 0xfd000018
1285 #define FW_RA_RESET 0xfd0000af
1286 #define FW_RA_ACTIVE 0xfd0000a6
1287 #define FW_RA_REFRESH 0xfd0000a0
1288 #define FW_RA_ENABLE_BG 0xfd0000ac
1289 #define FW_IQK_ENABLE 0xf0000020
1290 #define FW_IQK_SUCCESS 0x0000dddd
1291 #define FW_IQK_FAIL 0x0000ffff
1292 #define FW_OP_FAILURE 0xffffffff
1293 #define FW_DM_DISABLE 0xfd00aa00
1294 #define FW_BB_RESET_ENABLE 0xff00000d
1295 #define FW_BB_RESET_DISABLE 0xff00000e
1298 //--------------92SU require delete or move to other place later
1305 // 2008/08/06 MH For share the same 92S source/header files, we copy some
1306 // definition to pass 92SU compiler. But we must delete thm later.
1310 //============================================================================
1311 // 819xUsb Regsiter offset definition
1312 //============================================================================
1314 //2 define it temp!!!
1315 #define RFPC 0x5F // Rx FIFO Packet Count
1316 #define RCR_9356SEL BIT6
1317 #define TCR_LRL_OFFSET 0
1318 #define TCR_SRL_OFFSET 8
1319 #define TCR_MXDMA_OFFSET 21
1320 #define TCR_MXDMA_2048 7
1321 #define TCR_SAT BIT24 // Enable Rate depedent ack timeout timer
1322 #define RCR_MXDMA_OFFSET 8
1323 #define RCR_FIFO_OFFSET 13
1324 #define RCR_OnlyErlPkt BIT31 // Rx Early mode is performed for packet size greater than 1536
1325 #define CWR 0xDC // Contention window register
1326 #define RetryCTR 0xDE // Retry Count register
1329 // For backward compatible for 9xUSB
1330 #define LED1Cfg UnusedRegister // LED1 Configuration Register
1331 #define LED0Cfg UnusedRegister // LED0 Configuration Register
1332 #define GPI UnusedRegister // LED0 Configuration Register
1333 #define BRSR UnusedRegister // LED0 Configuration Register
1334 #define CPU_GEN UnusedRegister // LED0 Configuration Register
1335 #define SIFS UnusedRegister // LED0 Configuration Register
1337 //----------------------------------------------------------------------------
1338 // 8190 CPU General Register (offset 0x100, 4 byte)
1339 //----------------------------------------------------------------------------
1340 //#define CPU_CCK_LOOPBACK 0x00030000
1341 #define CPU_GEN_SYSTEM_RESET 0x00000001
1342 //#define CPU_GEN_FIRMWARE_RESET 0x00000008
1343 //#define CPU_GEN_BOOT_RDY 0x00000010
1344 //#define CPU_GEN_FIRM_RDY 0x00000020
1345 //#define CPU_GEN_PUT_CODE_OK 0x00000080
1346 //#define CPU_GEN_BB_RST 0x00000100
1347 //#define CPU_GEN_PWR_STB_CPU 0x00000004
1348 //#define CPU_GEN_NO_LOOPBACK_MSK 0xFFF8FFFF // Set bit18,17,16 to 0. Set bit19
1349 //#define CPU_GEN_NO_LOOPBACK_SET 0x00080000 // Set BIT19 to 1
1351 //----------------------------------------------------------------------------
1353 //----------------------------------------------------------------------------
1355 //#define RTL8190_EEPROM_ID 0x8129
1356 //#define EEPROM_VID 0x08
1357 //#define EEPROM_PID 0x0A
1358 //#define EEPROM_USB_OPTIONAL 0x0C
1359 //#define EEPROM_NODE_ADDRESS_BYTE_0 0x12
1361 //#define EEPROM_TxPowerDiff 0x1F
1362 //#define EEPROM_ThermalMeter 0x20
1363 //#define EEPROM_PwDiff 0x21 //0x21
1364 //#define EEPROM_CrystalCap 0x22 //0x22
1366 //#define EEPROM_TxPwIndex_CCK 0x23 //0x23
1367 //#define EEPROM_TxPwIndex_OFDM_24G 0x24 //0x24~0x26
1368 #define EEPROM_TxPwIndex_CCK_V1 0x29 //0x29~0x2B
1369 #define EEPROM_TxPwIndex_OFDM_24G_V1 0x2C //0x2C~0x2E
1370 #define EEPROM_TxPwIndex_Ver 0x27 //0x27
1372 //#define EEPROM_Default_TxPowerDiff 0x0
1373 //#define EEPROM_Default_ThermalMeter 0x7
1374 //#define EEPROM_Default_PwDiff 0x4
1375 //#define EEPROM_Default_CrystalCap 0x5
1376 //#define EEPROM_Default_TxPower 0x1010
1377 //#define EEPROM_Customer_ID 0x7B //0x7B:CustomerID
1378 //#define EEPROM_Version 0x50 // 0x50
1379 //#define EEPROM_CustomID 0x52
1380 //#define EEPROM_ChannelPlan 0x7c //0x7C
1381 //#define EEPROM_IC_VER 0x7d //0x7D
1382 //#define EEPROM_CRC 0x7e //0x7E~0x7F
1385 //#define EEPROM_CID_DEFAULT 0x0
1386 //#define EEPROM_CID_CAMEO 0x1
1387 //#define EEPROM_CID_RUNTOP 0x2
1388 //#define EEPROM_CID_Senao 0x3
1389 //#define EEPROM_CID_TOSHIBA 0x4 // Toshiba setting, Merge by Jacken, 2008/01/31
1390 //#define EEPROM_CID_NetCore 0x5
1394 //--------------92SU require delete or move to other place later
1397 //============================================================
1398 // CCX Related Register
1399 //============================================================
1400 #define CCX_COMMAND_REG 0x890
1401 // CCX Measurement Command Register. 4 Bytes.
1402 // Bit[0]: R_CLM_En, 1=enable, 0=disable. Enable or disable "Channel Load
1403 // Measurement (CLM)".
1404 // Bit[1]: R_NHM_En, 1=enable, 0=disable. Enable or disalbe "Noise Histogram
1405 // Measurement (NHM)".
1406 // Bit[2~7]: Reserved
1407 // Bit[8]: R_CCX_En: 1=enable, 0=disable. Enable or disable CCX function.
1408 // Note: After clearing this bit, all the result of all NHM_Result and CLM_
1409 // Result are cleared concurrently.
1410 // Bit[9]: R_Ignore_CCA: 1=enable, 0=disable. Enable means that treat CCA
1411 // period as idle time for NHM.
1412 // Bit[10]: R_Ignore_TXON: 1=enable, 0=disable. Enable means that treat TXON
1413 // period as idle time for NHM.
1414 // Bit[11~31]: Reserved.
1415 #define CLM_PERIOD_REG 0x894
1416 // CCX Measurement Period Register, in unit of 4us. 2 Bytes.
1417 #define NHM_PERIOD_REG 0x896
1418 // Noise Histogram Measurement Period Register, in unit of 4us. 2Bytes.
1419 #define NHM_THRESHOLD0 0x898 // Noise Histogram Meashorement0
1420 #define NHM_THRESHOLD1 0x899 // Noise Histogram Meashorement1
1421 #define NHM_THRESHOLD2 0x89A // Noise Histogram Meashorement2
1422 #define NHM_THRESHOLD3 0x89B // Noise Histogram Meashorement3
1423 #define NHM_THRESHOLD4 0x89C // Noise Histogram Meashorement4
1424 #define NHM_THRESHOLD5 0x89D // Noise Histogram Meashorement5
1425 #define NHM_THRESHOLD6 0x89E // Noise Histogram Meashorement6
1426 #define CLM_RESULT_REG 0x8D0
1427 // Channel Load result register. 4 Bytes.
1428 // Bit[0~15]: Total measured duration of CLM. The CCA busy fraction is caculate
1429 // by CLM_RESULT_REG/CLM_PERIOD_REG.
1430 // Bit[16]: Indicate the CLM result is ready.
1431 // Bit[17~31]: Reserved.
1432 #define NHM_RESULT_REG 0x8D4
1433 // Noise Histogram result register. 4 Bytes.
1434 // Bit[0~15]: Total measured duration of NHM. If R_Ignore_CCA=1 or
1435 // R_Ignore_TXON=1, this value will be less than NHM_PERIOD_REG.
1436 // Bit[16]: Indicate the NHM result is ready.
1437 // Bit[17~31]: Reserved.
1438 #define NHM_RPI_COUNTER0 0x8D8
1439 // NHM RPI counter0, the fraction of signal strength < NHM_THRESHOLD0.
1440 #define NHM_RPI_COUNTER1 0x8D9
1441 // NHM RPI counter1, the fraction of signal stren in NHM_THRESH0, NHM_THRESH1
1442 #define NHM_RPI_COUNTER2 0x8DA
1443 // NHM RPI counter2, the fraction of signal stren in NHM_THRESH2, NHM_THRESH3
1444 #define NHM_RPI_COUNTER3 0x8DB
1445 // NHM RPI counter3, the fraction of signal stren in NHM_THRESH4, NHM_THRESH5
1446 #define NHM_RPI_COUNTER4 0x8DC
1447 // NHM RPI counter4, the fraction of signal stren in NHM_THRESH6, NHM_THRESH7
1448 #define NHM_RPI_COUNTER5 0x8DD
1449 // NHM RPI counter5, the fraction of signal stren in NHM_THRESH8, NHM_THRESH9
1450 #define NHM_RPI_COUNTER6 0x8DE
1451 // NHM RPI counter6, the fraction of signal stren in NHM_THRESH10, NHM_THRESH11
1452 #define NHM_RPI_COUNTER7 0x8DF
1453 // NHM RPI counter7, the fraction of signal stren in NHM_THRESH12, NHM_THRESH13
1455 #define HAL_RETRY_LIMIT_INFRA 48
1456 #define HAL_RETRY_LIMIT_AP_ADHOC 7
1458 // HW Readio OFF switch (GPIO BIT)
1459 #define HAL_8192S_HW_GPIO_OFF_BIT BIT3
1460 #define HAL_8192S_HW_GPIO_OFF_MASK 0xF7
1461 #define HAL_8192S_HW_GPIO_WPS_BIT BIT4
git://ftp.safe.ca / safe / jmp / linux-2.6 / blob