SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/ssb/main.c

   1 /*
   2  * Sonics Silicon Backplane
   3  * Subsystem core
   4  *
   5  * Copyright 2005, Broadcom Corporation
   6  * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
   7  *
   8  * Licensed under the GNU/GPL. See COPYING for details.
   9  */
  10
  11 #include "ssb_private.h"
  12
  13 #include <linux/delay.h>
  14 #include <linux/io.h>
  15 #include <linux/ssb/ssb.h>
  16 #include <linux/ssb/ssb_regs.h>
  17 #include <linux/dma-mapping.h>
  18 #include <linux/pci.h>
  19
  20 #include <pcmcia/cs_types.h>
  21 #include <pcmcia/cs.h>
  22 #include <pcmcia/cistpl.h>
  23 #include <pcmcia/ds.h>
  24
  25
  26 MODULE_DESCRIPTION("Sonics Silicon Backplane driver");
  27 MODULE_LICENSE("GPL");
  28
  29
  30 /* Temporary list of yet-to-be-attached buses */
  31 static LIST_HEAD(attach_queue);
  32 /* List if running buses */
  33 static LIST_HEAD(buses);
  34 /* Software ID counter */
  35 static unsigned int next_busnumber;
  36 /* buses_mutes locks the two buslists and the next_busnumber.
  37  * Don't lock this directly, but use ssb_buses_[un]lock() below. */
  38 static DEFINE_MUTEX(buses_mutex);
  39
  40 /* There are differences in the codeflow, if the bus is
  41  * initialized from early boot, as various needed services
  42  * are not available early. This is a mechanism to delay
  43  * these initializations to after early boot has finished.
  44  * It's also used to avoid mutex locking, as that's not
  45  * available and needed early. */
  46 static bool ssb_is_early_boot = 1;
  47
  48 static void ssb_buses_lock(void);
  49 static void ssb_buses_unlock(void);
  50
  51
  52 #ifdef CONFIG_SSB_PCIHOST
  53 struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev)
  54 {
  55         struct ssb_bus *bus;
  56
  57         ssb_buses_lock();
  58         list_for_each_entry(bus, &buses, list) {
  59                 if (bus->bustype == SSB_BUSTYPE_PCI &&
  60                     bus->host_pci == pdev)
  61                         goto found;
  62         }
  63         bus = NULL;
  64 found:
  65         ssb_buses_unlock();
  66
  67         return bus;
  68 }
  69 #endif /* CONFIG_SSB_PCIHOST */
  70
  71 static struct ssb_device *ssb_device_get(struct ssb_device *dev)
  72 {
  73         if (dev)
  74                 get_device(dev->dev);
  75         return dev;
  76 }
  77
  78 static void ssb_device_put(struct ssb_device *dev)
  79 {
  80         if (dev)
  81                 put_device(dev->dev);
  82 }
  83
  84 static int ssb_bus_resume(struct ssb_bus *bus)
  85 {
  86         int err;
  87
  88         ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
  89         err = ssb_pcmcia_init(bus);
  90         if (err) {
  91                 /* No need to disable XTAL, as we don't have one on PCMCIA. */
  92                 return err;
  93         }
  94         ssb_chipco_resume(&bus->chipco);
  95
  96         return 0;
  97 }
  98
  99 static int ssb_device_resume(struct device *dev)
 100 {
 101         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 102         struct ssb_driver *ssb_drv;
 103         struct ssb_bus *bus;
 104         int err = 0;
 105
 106         bus = ssb_dev->bus;
 107         if (bus->suspend_cnt == bus->nr_devices) {
 108                 err = ssb_bus_resume(bus);
 109                 if (err)
 110                         return err;
 111         }
 112         bus->suspend_cnt--;
 113         if (dev->driver) {
 114                 ssb_drv = drv_to_ssb_drv(dev->driver);
 115                 if (ssb_drv && ssb_drv->resume)
 116                         err = ssb_drv->resume(ssb_dev);
 117                 if (err)
 118                         goto out;
 119         }
 120 out:
 121         return err;
 122 }
 123
 124 static void ssb_bus_suspend(struct ssb_bus *bus, pm_message_t state)
 125 {
 126         ssb_chipco_suspend(&bus->chipco, state);
 127         ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
 128
 129         /* Reset HW state information in memory, so that HW is
 130          * completely reinitialized on resume. */
 131         bus->mapped_device = NULL;
 132 #ifdef CONFIG_SSB_DRIVER_PCICORE
 133         bus->pcicore.setup_done = 0;
 134 #endif
 135 #ifdef CONFIG_SSB_DEBUG
 136         bus->powered_up = 0;
 137 #endif
 138 }
 139
 140 static int ssb_device_suspend(struct device *dev, pm_message_t state)
 141 {
 142         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 143         struct ssb_driver *ssb_drv;
 144         struct ssb_bus *bus;
 145         int err = 0;
 146
 147         if (dev->driver) {
 148                 ssb_drv = drv_to_ssb_drv(dev->driver);
 149                 if (ssb_drv && ssb_drv->suspend)
 150                         err = ssb_drv->suspend(ssb_dev, state);
 151                 if (err)
 152                         goto out;
 153         }
 154
 155         bus = ssb_dev->bus;
 156         bus->suspend_cnt++;
 157         if (bus->suspend_cnt == bus->nr_devices) {
 158                 /* All devices suspended. Shutdown the bus. */
 159                 ssb_bus_suspend(bus, state);
 160         }
 161
 162 out:
 163         return err;
 164 }
 165
 166 #ifdef CONFIG_SSB_PCIHOST
 167 int ssb_devices_freeze(struct ssb_bus *bus)
 168 {
 169         struct ssb_device *dev;
 170         struct ssb_driver *drv;
 171         int err = 0;
 172         int i;
 173         pm_message_t state = PMSG_FREEZE;
 174
 175         /* First check that we are capable to freeze all devices. */
 176         for (i = 0; i < bus->nr_devices; i++) {
 177                 dev = &(bus->devices[i]);
 178                 if (!dev->dev ||
 179                     !dev->dev->driver ||
 180                     !device_is_registered(dev->dev))
 181                         continue;
 182                 drv = drv_to_ssb_drv(dev->dev->driver);
 183                 if (!drv)
 184                         continue;
 185                 if (!drv->suspend) {
 186                         /* Nope, can't suspend this one. */
 187                         return -EOPNOTSUPP;
 188                 }
 189         }
 190         /* Now suspend all devices */
 191         for (i = 0; i < bus->nr_devices; i++) {
 192                 dev = &(bus->devices[i]);
 193                 if (!dev->dev ||
 194                     !dev->dev->driver ||
 195                     !device_is_registered(dev->dev))
 196                         continue;
 197                 drv = drv_to_ssb_drv(dev->dev->driver);
 198                 if (!drv)
 199                         continue;
 200                 err = drv->suspend(dev, state);
 201                 if (err) {
 202                         ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n",
 203                                    dev->dev->bus_id);
 204                         goto err_unwind;
 205                 }
 206         }
 207
 208         return 0;
 209 err_unwind:
 210         for (i--; i >= 0; i--) {
 211                 dev = &(bus->devices[i]);
 212                 if (!dev->dev ||
 213                     !dev->dev->driver ||
 214                     !device_is_registered(dev->dev))
 215                         continue;
 216                 drv = drv_to_ssb_drv(dev->dev->driver);
 217                 if (!drv)
 218                         continue;
 219                 if (drv->resume)
 220                         drv->resume(dev);
 221         }
 222         return err;
 223 }
 224
 225 int ssb_devices_thaw(struct ssb_bus *bus)
 226 {
 227         struct ssb_device *dev;
 228         struct ssb_driver *drv;
 229         int err;
 230         int i;
 231
 232         for (i = 0; i < bus->nr_devices; i++) {
 233                 dev = &(bus->devices[i]);
 234                 if (!dev->dev ||
 235                     !dev->dev->driver ||
 236                     !device_is_registered(dev->dev))
 237                         continue;
 238                 drv = drv_to_ssb_drv(dev->dev->driver);
 239                 if (!drv)
 240                         continue;
 241                 if (SSB_WARN_ON(!drv->resume))
 242                         continue;
 243                 err = drv->resume(dev);
 244                 if (err) {
 245                         ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
 246                                    dev->dev->bus_id);
 247                 }
 248         }
 249
 250         return 0;
 251 }
 252 #endif /* CONFIG_SSB_PCIHOST */
 253
 254 static void ssb_device_shutdown(struct device *dev)
 255 {
 256         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 257         struct ssb_driver *ssb_drv;
 258
 259         if (!dev->driver)
 260                 return;
 261         ssb_drv = drv_to_ssb_drv(dev->driver);
 262         if (ssb_drv && ssb_drv->shutdown)
 263                 ssb_drv->shutdown(ssb_dev);
 264 }
 265
 266 static int ssb_device_remove(struct device *dev)
 267 {
 268         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 269         struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver);
 270
 271         if (ssb_drv && ssb_drv->remove)
 272                 ssb_drv->remove(ssb_dev);
 273         ssb_device_put(ssb_dev);
 274
 275         return 0;
 276 }
 277
 278 static int ssb_device_probe(struct device *dev)
 279 {
 280         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 281         struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver);
 282         int err = 0;
 283
 284         ssb_device_get(ssb_dev);
 285         if (ssb_drv && ssb_drv->probe)
 286                 err = ssb_drv->probe(ssb_dev, &ssb_dev->id);
 287         if (err)
 288                 ssb_device_put(ssb_dev);
 289
 290         return err;
 291 }
 292
 293 static int ssb_match_devid(const struct ssb_device_id *tabid,
 294                            const struct ssb_device_id *devid)
 295 {
 296         if ((tabid->vendor != devid->vendor) &&
 297             tabid->vendor != SSB_ANY_VENDOR)
 298                 return 0;
 299         if ((tabid->coreid != devid->coreid) &&
 300             tabid->coreid != SSB_ANY_ID)
 301                 return 0;
 302         if ((tabid->revision != devid->revision) &&
 303             tabid->revision != SSB_ANY_REV)
 304                 return 0;
 305         return 1;
 306 }
 307
 308 static int ssb_bus_match(struct device *dev, struct device_driver *drv)
 309 {
 310         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 311         struct ssb_driver *ssb_drv = drv_to_ssb_drv(drv);
 312         const struct ssb_device_id *id;
 313
 314         for (id = ssb_drv->id_table;
 315              id->vendor || id->coreid || id->revision;
 316              id++) {
 317                 if (ssb_match_devid(id, &ssb_dev->id))
 318                         return 1; /* found */
 319         }
 320
 321         return 0;
 322 }
 323
 324 static int ssb_device_uevent(struct device *dev, struct kobj_uevent_env *env)
 325 {
 326         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 327
 328         if (!dev)
 329                 return -ENODEV;
 330
 331         return add_uevent_var(env,
 332                              "MODALIAS=ssb:v%04Xid%04Xrev%02X",
 333                              ssb_dev->id.vendor, ssb_dev->id.coreid,
 334                              ssb_dev->id.revision);
 335 }
 336
 337 static struct bus_type ssb_bustype = {
 338         .name           = "ssb",
 339         .match          = ssb_bus_match,
 340         .probe          = ssb_device_probe,
 341         .remove         = ssb_device_remove,
 342         .shutdown       = ssb_device_shutdown,
 343         .suspend        = ssb_device_suspend,
 344         .resume         = ssb_device_resume,
 345         .uevent         = ssb_device_uevent,
 346 };
 347
 348 static void ssb_buses_lock(void)
 349 {
 350         /* See the comment at the ssb_is_early_boot definition */
 351         if (!ssb_is_early_boot)
 352                 mutex_lock(&buses_mutex);
 353 }
 354
 355 static void ssb_buses_unlock(void)
 356 {
 357         /* See the comment at the ssb_is_early_boot definition */
 358         if (!ssb_is_early_boot)
 359                 mutex_unlock(&buses_mutex);
 360 }
 361
 362 static void ssb_devices_unregister(struct ssb_bus *bus)
 363 {
 364         struct ssb_device *sdev;
 365         int i;
 366
 367         for (i = bus->nr_devices - 1; i >= 0; i--) {
 368                 sdev = &(bus->devices[i]);
 369                 if (sdev->dev)
 370                         device_unregister(sdev->dev);
 371         }
 372 }
 373
 374 void ssb_bus_unregister(struct ssb_bus *bus)
 375 {
 376         ssb_buses_lock();
 377         ssb_devices_unregister(bus);
 378         list_del(&bus->list);
 379         ssb_buses_unlock();
 380
 381         /* ssb_pcmcia_exit(bus); */
 382         ssb_pci_exit(bus);
 383         ssb_iounmap(bus);
 384 }
 385 EXPORT_SYMBOL(ssb_bus_unregister);
 386
 387 static void ssb_release_dev(struct device *dev)
 388 {
 389         struct __ssb_dev_wrapper *devwrap;
 390
 391         devwrap = container_of(dev, struct __ssb_dev_wrapper, dev);
 392         kfree(devwrap);
 393 }
 394
 395 static int ssb_devices_register(struct ssb_bus *bus)
 396 {
 397         struct ssb_device *sdev;
 398         struct device *dev;
 399         struct __ssb_dev_wrapper *devwrap;
 400         int i, err = 0;
 401         int dev_idx = 0;
 402
 403         for (i = 0; i < bus->nr_devices; i++) {
 404                 sdev = &(bus->devices[i]);
 405
 406                 /* We don't register SSB-system devices to the kernel,
 407                  * as the drivers for them are built into SSB. */
 408                 switch (sdev->id.coreid) {
 409                 case SSB_DEV_CHIPCOMMON:
 410                 case SSB_DEV_PCI:
 411                 case SSB_DEV_PCIE:
 412                 case SSB_DEV_PCMCIA:
 413                 case SSB_DEV_MIPS:
 414                 case SSB_DEV_MIPS_3302:
 415                 case SSB_DEV_EXTIF:
 416                         continue;
 417                 }
 418
 419                 devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL);
 420                 if (!devwrap) {
 421                         ssb_printk(KERN_ERR PFX
 422                                    "Could not allocate device\n");
 423                         err = -ENOMEM;
 424                         goto error;
 425                 }
 426                 dev = &devwrap->dev;
 427                 devwrap->sdev = sdev;
 428
 429                 dev->release = ssb_release_dev;
 430                 dev->bus = &ssb_bustype;
 431                 snprintf(dev->bus_id, sizeof(dev->bus_id),
 432                          "ssb%u:%d", bus->busnumber, dev_idx);
 433
 434                 switch (bus->bustype) {
 435                 case SSB_BUSTYPE_PCI:
 436 #ifdef CONFIG_SSB_PCIHOST
 437                         sdev->irq = bus->host_pci->irq;
 438                         dev->parent = &bus->host_pci->dev;
 439 #endif
 440                         break;
 441                 case SSB_BUSTYPE_PCMCIA:
 442 #ifdef CONFIG_SSB_PCMCIAHOST
 443                         dev->parent = &bus->host_pcmcia->dev;
 444 #endif
 445                         break;
 446                 case SSB_BUSTYPE_SSB:
 447                         break;
 448                 }
 449
 450                 sdev->dev = dev;
 451                 err = device_register(dev);
 452                 if (err) {
 453                         ssb_printk(KERN_ERR PFX
 454                                    "Could not register %s\n",
 455                                    dev->bus_id);
 456                         /* Set dev to NULL to not unregister
 457                          * dev on error unwinding. */
 458                         sdev->dev = NULL;
 459                         kfree(devwrap);
 460                         goto error;
 461                 }
 462                 dev_idx++;
 463         }
 464
 465         return 0;
 466 error:
 467         /* Unwind the already registered devices. */
 468         ssb_devices_unregister(bus);
 469         return err;
 470 }
 471
 472 /* Needs ssb_buses_lock() */
 473 static int ssb_attach_queued_buses(void)
 474 {
 475         struct ssb_bus *bus, *n;
 476         int err = 0;
 477         int drop_them_all = 0;
 478
 479         list_for_each_entry_safe(bus, n, &attach_queue, list) {
 480                 if (drop_them_all) {
 481                         list_del(&bus->list);
 482                         continue;
 483                 }
 484                 /* Can't init the PCIcore in ssb_bus_register(), as that
 485                  * is too early in boot for embedded systems
 486                  * (no udelay() available). So do it here in attach stage.
 487                  */
 488                 err = ssb_bus_powerup(bus, 0);
 489                 if (err)
 490                         goto error;
 491                 ssb_pcicore_init(&bus->pcicore);
 492                 ssb_bus_may_powerdown(bus);
 493
 494                 err = ssb_devices_register(bus);
 495 error:
 496                 if (err) {
 497                         drop_them_all = 1;
 498                         list_del(&bus->list);
 499                         continue;
 500                 }
 501                 list_move_tail(&bus->list, &buses);
 502         }
 503
 504         return err;
 505 }
 506
 507 static u16 ssb_ssb_read16(struct ssb_device *dev, u16 offset)
 508 {
 509         struct ssb_bus *bus = dev->bus;
 510
 511         offset += dev->core_index * SSB_CORE_SIZE;
 512         return readw(bus->mmio + offset);
 513 }
 514
 515 static u32 ssb_ssb_read32(struct ssb_device *dev, u16 offset)
 516 {
 517         struct ssb_bus *bus = dev->bus;
 518
 519         offset += dev->core_index * SSB_CORE_SIZE;
 520         return readl(bus->mmio + offset);
 521 }
 522
 523 static void ssb_ssb_write16(struct ssb_device *dev, u16 offset, u16 value)
 524 {
 525         struct ssb_bus *bus = dev->bus;
 526
 527         offset += dev->core_index * SSB_CORE_SIZE;
 528         writew(value, bus->mmio + offset);
 529 }
 530
 531 static void ssb_ssb_write32(struct ssb_device *dev, u16 offset, u32 value)
 532 {
 533         struct ssb_bus *bus = dev->bus;
 534
 535         offset += dev->core_index * SSB_CORE_SIZE;
 536         writel(value, bus->mmio + offset);
 537 }
 538
 539 /* Ops for the plain SSB bus without a host-device (no PCI or PCMCIA). */
 540 static const struct ssb_bus_ops ssb_ssb_ops = {
 541         .read16         = ssb_ssb_read16,
 542         .read32         = ssb_ssb_read32,
 543         .write16        = ssb_ssb_write16,
 544         .write32        = ssb_ssb_write32,
 545 };
 546
 547 static int ssb_fetch_invariants(struct ssb_bus *bus,
 548                                 ssb_invariants_func_t get_invariants)
 549 {
 550         struct ssb_init_invariants iv;
 551         int err;
 552
 553         memset(&iv, 0, sizeof(iv));
 554         err = get_invariants(bus, &iv);
 555         if (err)
 556                 goto out;
 557         memcpy(&bus->boardinfo, &iv.boardinfo, sizeof(iv.boardinfo));
 558         memcpy(&bus->sprom, &iv.sprom, sizeof(iv.sprom));
 559 out:
 560         return err;
 561 }
 562
 563 static int ssb_bus_register(struct ssb_bus *bus,
 564                             ssb_invariants_func_t get_invariants,
 565                             unsigned long baseaddr)
 566 {
 567         int err;
 568
 569         spin_lock_init(&bus->bar_lock);
 570         INIT_LIST_HEAD(&bus->list);
 571
 572         /* Powerup the bus */
 573         err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
 574         if (err)
 575                 goto out;
 576         ssb_buses_lock();
 577         bus->busnumber = next_busnumber;
 578         /* Scan for devices (cores) */
 579         err = ssb_bus_scan(bus, baseaddr);
 580         if (err)
 581                 goto err_disable_xtal;
 582
 583         /* Init PCI-host device (if any) */
 584         err = ssb_pci_init(bus);
 585         if (err)
 586                 goto err_unmap;
 587         /* Init PCMCIA-host device (if any) */
 588         err = ssb_pcmcia_init(bus);
 589         if (err)
 590                 goto err_pci_exit;
 591
 592         /* Initialize basic system devices (if available) */
 593         err = ssb_bus_powerup(bus, 0);
 594         if (err)
 595                 goto err_pcmcia_exit;
 596         ssb_chipcommon_init(&bus->chipco);
 597         ssb_mipscore_init(&bus->mipscore);
 598         err = ssb_fetch_invariants(bus, get_invariants);
 599         if (err) {
 600                 ssb_bus_may_powerdown(bus);
 601                 goto err_pcmcia_exit;
 602         }
 603         ssb_bus_may_powerdown(bus);
 604
 605         /* Queue it for attach.
 606          * See the comment at the ssb_is_early_boot definition. */
 607         list_add_tail(&bus->list, &attach_queue);
 608         if (!ssb_is_early_boot) {
 609                 /* This is not early boot, so we must attach the bus now */
 610                 err = ssb_attach_queued_buses();
 611                 if (err)
 612                         goto err_dequeue;
 613         }
 614         next_busnumber++;
 615         ssb_buses_unlock();
 616
 617 out:
 618         return err;
 619
 620 err_dequeue:
 621         list_del(&bus->list);
 622 err_pcmcia_exit:
 623 /*      ssb_pcmcia_exit(bus); */
 624 err_pci_exit:
 625         ssb_pci_exit(bus);
 626 err_unmap:
 627         ssb_iounmap(bus);
 628 err_disable_xtal:
 629         ssb_buses_unlock();
 630         ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
 631         return err;
 632 }
 633
 634 #ifdef CONFIG_SSB_PCIHOST
 635 int ssb_bus_pcibus_register(struct ssb_bus *bus,
 636                             struct pci_dev *host_pci)
 637 {
 638         int err;
 639
 640         bus->bustype = SSB_BUSTYPE_PCI;
 641         bus->host_pci = host_pci;
 642         bus->ops = &ssb_pci_ops;
 643
 644         err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
 645         if (!err) {
 646                 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
 647                            "PCI device %s\n", host_pci->dev.bus_id);
 648         }
 649
 650         return err;
 651 }
 652 EXPORT_SYMBOL(ssb_bus_pcibus_register);
 653 #endif /* CONFIG_SSB_PCIHOST */
 654
 655 #ifdef CONFIG_SSB_PCMCIAHOST
 656 int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
 657                                struct pcmcia_device *pcmcia_dev,
 658                                unsigned long baseaddr)
 659 {
 660         int err;
 661
 662         bus->bustype = SSB_BUSTYPE_PCMCIA;
 663         bus->host_pcmcia = pcmcia_dev;
 664         bus->ops = &ssb_pcmcia_ops;
 665
 666         err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
 667         if (!err) {
 668                 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
 669                            "PCMCIA device %s\n", pcmcia_dev->devname);
 670         }
 671
 672         return err;
 673 }
 674 EXPORT_SYMBOL(ssb_bus_pcmciabus_register);
 675 #endif /* CONFIG_SSB_PCMCIAHOST */
 676
 677 int ssb_bus_ssbbus_register(struct ssb_bus *bus,
 678                             unsigned long baseaddr,
 679                             ssb_invariants_func_t get_invariants)
 680 {
 681         int err;
 682
 683         bus->bustype = SSB_BUSTYPE_SSB;
 684         bus->ops = &ssb_ssb_ops;
 685
 686         err = ssb_bus_register(bus, get_invariants, baseaddr);
 687         if (!err) {
 688                 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at "
 689                            "address 0x%08lX\n", baseaddr);
 690         }
 691
 692         return err;
 693 }
 694
 695 int __ssb_driver_register(struct ssb_driver *drv, struct module *owner)
 696 {
 697         drv->drv.name = drv->name;
 698         drv->drv.bus = &ssb_bustype;
 699         drv->drv.owner = owner;
 700
 701         return driver_register(&drv->drv);
 702 }
 703 EXPORT_SYMBOL(__ssb_driver_register);
 704
 705 void ssb_driver_unregister(struct ssb_driver *drv)
 706 {
 707         driver_unregister(&drv->drv);
 708 }
 709 EXPORT_SYMBOL(ssb_driver_unregister);
 710
 711 void ssb_set_devtypedata(struct ssb_device *dev, void *data)
 712 {
 713         struct ssb_bus *bus = dev->bus;
 714         struct ssb_device *ent;
 715         int i;
 716
 717         for (i = 0; i < bus->nr_devices; i++) {
 718                 ent = &(bus->devices[i]);
 719                 if (ent->id.vendor != dev->id.vendor)
 720                         continue;
 721                 if (ent->id.coreid != dev->id.coreid)
 722                         continue;
 723
 724                 ent->devtypedata = data;
 725         }
 726 }
 727 EXPORT_SYMBOL(ssb_set_devtypedata);
 728
 729 static u32 clkfactor_f6_resolve(u32 v)
 730 {
 731         /* map the magic values */
 732         switch (v) {
 733         case SSB_CHIPCO_CLK_F6_2:
 734                 return 2;
 735         case SSB_CHIPCO_CLK_F6_3:
 736                 return 3;
 737         case SSB_CHIPCO_CLK_F6_4:
 738                 return 4;
 739         case SSB_CHIPCO_CLK_F6_5:
 740                 return 5;
 741         case SSB_CHIPCO_CLK_F6_6:
 742                 return 6;
 743         case SSB_CHIPCO_CLK_F6_7:
 744                 return 7;
 745         }
 746         return 0;
 747 }
 748
 749 /* Calculate the speed the backplane would run at a given set of clockcontrol values */
 750 u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m)
 751 {
 752         u32 n1, n2, clock, m1, m2, m3, mc;
 753
 754         n1 = (n & SSB_CHIPCO_CLK_N1);
 755         n2 = ((n & SSB_CHIPCO_CLK_N2) >> SSB_CHIPCO_CLK_N2_SHIFT);
 756
 757         switch (plltype) {
 758         case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
 759                 if (m & SSB_CHIPCO_CLK_T6_MMASK)
 760                         return SSB_CHIPCO_CLK_T6_M0;
 761                 return SSB_CHIPCO_CLK_T6_M1;
 762         case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
 763         case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
 764         case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
 765         case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
 766                 n1 = clkfactor_f6_resolve(n1);
 767                 n2 += SSB_CHIPCO_CLK_F5_BIAS;
 768                 break;
 769         case SSB_PLLTYPE_2: /* 48Mhz, 4 dividers */
 770                 n1 += SSB_CHIPCO_CLK_T2_BIAS;
 771                 n2 += SSB_CHIPCO_CLK_T2_BIAS;
 772                 SSB_WARN_ON(!((n1 >= 2) && (n1 <= 7)));
 773                 SSB_WARN_ON(!((n2 >= 5) && (n2 <= 23)));
 774                 break;
 775         case SSB_PLLTYPE_5: /* 25Mhz, 4 dividers */
 776                 return 100000000;
 777         default:
 778                 SSB_WARN_ON(1);
 779         }
 780
 781         switch (plltype) {
 782         case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
 783         case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
 784                 clock = SSB_CHIPCO_CLK_BASE2 * n1 * n2;
 785                 break;
 786         default:
 787                 clock = SSB_CHIPCO_CLK_BASE1 * n1 * n2;
 788         }
 789         if (!clock)
 790                 return 0;
 791
 792         m1 = (m & SSB_CHIPCO_CLK_M1);
 793         m2 = ((m & SSB_CHIPCO_CLK_M2) >> SSB_CHIPCO_CLK_M2_SHIFT);
 794         m3 = ((m & SSB_CHIPCO_CLK_M3) >> SSB_CHIPCO_CLK_M3_SHIFT);
 795         mc = ((m & SSB_CHIPCO_CLK_MC) >> SSB_CHIPCO_CLK_MC_SHIFT);
 796
 797         switch (plltype) {
 798         case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
 799         case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
 800         case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
 801         case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
 802                 m1 = clkfactor_f6_resolve(m1);
 803                 if ((plltype == SSB_PLLTYPE_1) ||
 804                     (plltype == SSB_PLLTYPE_3))
 805                         m2 += SSB_CHIPCO_CLK_F5_BIAS;
 806                 else
 807                         m2 = clkfactor_f6_resolve(m2);
 808                 m3 = clkfactor_f6_resolve(m3);
 809
 810                 switch (mc) {
 811                 case SSB_CHIPCO_CLK_MC_BYPASS:
 812                         return clock;
 813                 case SSB_CHIPCO_CLK_MC_M1:
 814                         return (clock / m1);
 815                 case SSB_CHIPCO_CLK_MC_M1M2:
 816                         return (clock / (m1 * m2));
 817                 case SSB_CHIPCO_CLK_MC_M1M2M3:
 818                         return (clock / (m1 * m2 * m3));
 819                 case SSB_CHIPCO_CLK_MC_M1M3:
 820                         return (clock / (m1 * m3));
 821                 }
 822                 return 0;
 823         case SSB_PLLTYPE_2:
 824                 m1 += SSB_CHIPCO_CLK_T2_BIAS;
 825                 m2 += SSB_CHIPCO_CLK_T2M2_BIAS;
 826                 m3 += SSB_CHIPCO_CLK_T2_BIAS;
 827                 SSB_WARN_ON(!((m1 >= 2) && (m1 <= 7)));
 828                 SSB_WARN_ON(!((m2 >= 3) && (m2 <= 10)));
 829                 SSB_WARN_ON(!((m3 >= 2) && (m3 <= 7)));
 830
 831                 if (!(mc & SSB_CHIPCO_CLK_T2MC_M1BYP))
 832                         clock /= m1;
 833                 if (!(mc & SSB_CHIPCO_CLK_T2MC_M2BYP))
 834                         clock /= m2;
 835                 if (!(mc & SSB_CHIPCO_CLK_T2MC_M3BYP))
 836                         clock /= m3;
 837                 return clock;
 838         default:
 839                 SSB_WARN_ON(1);
 840         }
 841         return 0;
 842 }
 843
 844 /* Get the current speed the backplane is running at */
 845 u32 ssb_clockspeed(struct ssb_bus *bus)
 846 {
 847         u32 rate;
 848         u32 plltype;
 849         u32 clkctl_n, clkctl_m;
 850
 851         if (ssb_extif_available(&bus->extif))
 852                 ssb_extif_get_clockcontrol(&bus->extif, &plltype,
 853                                            &clkctl_n, &clkctl_m);
 854         else if (bus->chipco.dev)
 855                 ssb_chipco_get_clockcontrol(&bus->chipco, &plltype,
 856                                             &clkctl_n, &clkctl_m);
 857         else
 858                 return 0;
 859
 860         if (bus->chip_id == 0x5365) {
 861                 rate = 100000000;
 862         } else {
 863                 rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m);
 864                 if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */
 865                         rate /= 2;
 866         }
 867
 868         return rate;
 869 }
 870 EXPORT_SYMBOL(ssb_clockspeed);
 871
 872 static u32 ssb_tmslow_reject_bitmask(struct ssb_device *dev)
 873 {
 874         /* The REJECT bit changed position in TMSLOW between
 875          * Backplane revisions. */
 876         switch (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV) {
 877         case SSB_IDLOW_SSBREV_22:
 878                 return SSB_TMSLOW_REJECT_22;
 879         case SSB_IDLOW_SSBREV_23:
 880                 return SSB_TMSLOW_REJECT_23;
 881         default:
 882                 WARN_ON(1);
 883         }
 884         return (SSB_TMSLOW_REJECT_22 | SSB_TMSLOW_REJECT_23);
 885 }
 886
 887 int ssb_device_is_enabled(struct ssb_device *dev)
 888 {
 889         u32 val;
 890         u32 reject;
 891
 892         reject = ssb_tmslow_reject_bitmask(dev);
 893         val = ssb_read32(dev, SSB_TMSLOW);
 894         val &= SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET | reject;
 895
 896         return (val == SSB_TMSLOW_CLOCK);
 897 }
 898 EXPORT_SYMBOL(ssb_device_is_enabled);
 899
 900 static void ssb_flush_tmslow(struct ssb_device *dev)
 901 {
 902         /* Make _really_ sure the device has finished the TMSLOW
 903          * register write transaction, as we risk running into
 904          * a machine check exception otherwise.
 905          * Do this by reading the register back to commit the
 906          * PCI write and delay an additional usec for the device
 907          * to react to the change. */
 908         ssb_read32(dev, SSB_TMSLOW);
 909         udelay(1);
 910 }
 911
 912 void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags)
 913 {
 914         u32 val;
 915
 916         ssb_device_disable(dev, core_specific_flags);
 917         ssb_write32(dev, SSB_TMSLOW,
 918                     SSB_TMSLOW_RESET | SSB_TMSLOW_CLOCK |
 919                     SSB_TMSLOW_FGC | core_specific_flags);
 920         ssb_flush_tmslow(dev);
 921
 922         /* Clear SERR if set. This is a hw bug workaround. */
 923         if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_SERR)
 924                 ssb_write32(dev, SSB_TMSHIGH, 0);
 925
 926         val = ssb_read32(dev, SSB_IMSTATE);
 927         if (val & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO)) {
 928                 val &= ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO);
 929                 ssb_write32(dev, SSB_IMSTATE, val);
 930         }
 931
 932         ssb_write32(dev, SSB_TMSLOW,
 933                     SSB_TMSLOW_CLOCK | SSB_TMSLOW_FGC |
 934                     core_specific_flags);
 935         ssb_flush_tmslow(dev);
 936
 937         ssb_write32(dev, SSB_TMSLOW, SSB_TMSLOW_CLOCK |
 938                     core_specific_flags);
 939         ssb_flush_tmslow(dev);
 940 }
 941 EXPORT_SYMBOL(ssb_device_enable);
 942
 943 /* Wait for a bit in a register to get set or unset.
 944  * timeout is in units of ten-microseconds */
 945 static int ssb_wait_bit(struct ssb_device *dev, u16 reg, u32 bitmask,
 946                         int timeout, int set)
 947 {
 948         int i;
 949         u32 val;
 950
 951         for (i = 0; i < timeout; i++) {
 952                 val = ssb_read32(dev, reg);
 953                 if (set) {
 954                         if (val & bitmask)
 955                                 return 0;
 956                 } else {
 957                         if (!(val & bitmask))
 958                                 return 0;
 959                 }
 960                 udelay(10);
 961         }
 962         printk(KERN_ERR PFX "Timeout waiting for bitmask %08X on "
 963                             "register %04X to %s.\n",
 964                bitmask, reg, (set ? "set" : "clear"));
 965
 966         return -ETIMEDOUT;
 967 }
 968
 969 void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags)
 970 {
 971         u32 reject;
 972
 973         if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET)
 974                 return;
 975
 976         reject = ssb_tmslow_reject_bitmask(dev);
 977         ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
 978         ssb_wait_bit(dev, SSB_TMSLOW, reject, 1000, 1);
 979         ssb_wait_bit(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
 980         ssb_write32(dev, SSB_TMSLOW,
 981                     SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
 982                     reject | SSB_TMSLOW_RESET |
 983                     core_specific_flags);
 984         ssb_flush_tmslow(dev);
 985
 986         ssb_write32(dev, SSB_TMSLOW,
 987                     reject | SSB_TMSLOW_RESET |
 988                     core_specific_flags);
 989         ssb_flush_tmslow(dev);
 990 }
 991 EXPORT_SYMBOL(ssb_device_disable);
 992
 993 u32 ssb_dma_translation(struct ssb_device *dev)
 994 {
 995         switch (dev->bus->bustype) {
 996         case SSB_BUSTYPE_SSB:
 997                 return 0;
 998         case SSB_BUSTYPE_PCI:
 999         case SSB_BUSTYPE_PCMCIA:
1000                 return SSB_PCI_DMA;
1001         }
1002         return 0;
1003 }
1004 EXPORT_SYMBOL(ssb_dma_translation);
1005
1006 int ssb_dma_set_mask(struct ssb_device *ssb_dev, u64 mask)
1007 {
1008         struct device *dev = ssb_dev->dev;
1009
1010 #ifdef CONFIG_SSB_PCIHOST
1011         if (ssb_dev->bus->bustype == SSB_BUSTYPE_PCI &&
1012             !dma_supported(dev, mask))
1013                 return -EIO;
1014 #endif
1015         dev->coherent_dma_mask = mask;
1016         dev->dma_mask = &dev->coherent_dma_mask;
1017
1018         return 0;
1019 }
1020 EXPORT_SYMBOL(ssb_dma_set_mask);
1021
1022 int ssb_bus_may_powerdown(struct ssb_bus *bus)
1023 {
1024         struct ssb_chipcommon *cc;
1025         int err = 0;
1026
1027         /* On buses where more than one core may be working
1028          * at a time, we must not powerdown stuff if there are
1029          * still cores that may want to run. */
1030         if (bus->bustype == SSB_BUSTYPE_SSB)
1031                 goto out;
1032
1033         cc = &bus->chipco;
1034         ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW);
1035         err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
1036         if (err)
1037                 goto error;
1038 out:
1039 #ifdef CONFIG_SSB_DEBUG
1040         bus->powered_up = 0;
1041 #endif
1042         return err;
1043 error:
1044         ssb_printk(KERN_ERR PFX "Bus powerdown failed\n");
1045         goto out;
1046 }
1047 EXPORT_SYMBOL(ssb_bus_may_powerdown);
1048
1049 int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl)
1050 {
1051         struct ssb_chipcommon *cc;
1052         int err;
1053         enum ssb_clkmode mode;
1054
1055         err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
1056         if (err)
1057                 goto error;
1058         cc = &bus->chipco;
1059         mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
1060         ssb_chipco_set_clockmode(cc, mode);
1061
1062 #ifdef CONFIG_SSB_DEBUG
1063         bus->powered_up = 1;
1064 #endif
1065         return 0;
1066 error:
1067         ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
1068         return err;
1069 }
1070 EXPORT_SYMBOL(ssb_bus_powerup);
1071
1072 u32 ssb_admatch_base(u32 adm)
1073 {
1074         u32 base = 0;
1075
1076         switch (adm & SSB_ADM_TYPE) {
1077         case SSB_ADM_TYPE0:
1078                 base = (adm & SSB_ADM_BASE0);
1079                 break;
1080         case SSB_ADM_TYPE1:
1081                 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
1082                 base = (adm & SSB_ADM_BASE1);
1083                 break;
1084         case SSB_ADM_TYPE2:
1085                 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
1086                 base = (adm & SSB_ADM_BASE2);
1087                 break;
1088         default:
1089                 SSB_WARN_ON(1);
1090         }
1091
1092         return base;
1093 }
1094 EXPORT_SYMBOL(ssb_admatch_base);
1095
1096 u32 ssb_admatch_size(u32 adm)
1097 {
1098         u32 size = 0;
1099
1100         switch (adm & SSB_ADM_TYPE) {
1101         case SSB_ADM_TYPE0:
1102                 size = ((adm & SSB_ADM_SZ0) >> SSB_ADM_SZ0_SHIFT);
1103                 break;
1104         case SSB_ADM_TYPE1:
1105                 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
1106                 size = ((adm & SSB_ADM_SZ1) >> SSB_ADM_SZ1_SHIFT);
1107                 break;
1108         case SSB_ADM_TYPE2:
1109                 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
1110                 size = ((adm & SSB_ADM_SZ2) >> SSB_ADM_SZ2_SHIFT);
1111                 break;
1112         default:
1113                 SSB_WARN_ON(1);
1114         }
1115         size = (1 << (size + 1));
1116
1117         return size;
1118 }
1119 EXPORT_SYMBOL(ssb_admatch_size);
1120
1121 static int __init ssb_modinit(void)
1122 {
1123         int err;
1124
1125         /* See the comment at the ssb_is_early_boot definition */
1126         ssb_is_early_boot = 0;
1127         err = bus_register(&ssb_bustype);
1128         if (err)
1129                 return err;
1130
1131         /* Maybe we already registered some buses at early boot.
1132          * Check for this and attach them
1133          */
1134         ssb_buses_lock();
1135         err = ssb_attach_queued_buses();
1136         ssb_buses_unlock();
1137         if (err)
1138                 bus_unregister(&ssb_bustype);
1139
1140         err = b43_pci_ssb_bridge_init();
1141         if (err) {
1142                 ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
1143                            "initialization failed");
1144                 /* don't fail SSB init because of this */
1145                 err = 0;
1146         }
1147
1148         return err;
1149 }
1150 subsys_initcall(ssb_modinit);
1151
1152 static void __exit ssb_modexit(void)
1153 {
1154         b43_pci_ssb_bridge_exit();
1155         bus_unregister(&ssb_bustype);
1156 }
1157 module_exit(ssb_modexit)