SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/ssb/main.c

   1 /*
   2  * Sonics Silicon Backplane
   3  * Subsystem core
   4  *
   5  * Copyright 2005, Broadcom Corporation
   6  * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
   7  *
   8  * Licensed under the GNU/GPL. See COPYING for details.
   9  */
  10
  11 #include "ssb_private.h"
  12
  13 #include <linux/delay.h>
  14 #include <linux/io.h>
  15 #include <linux/ssb/ssb.h>
  16 #include <linux/ssb/ssb_regs.h>
  17 #include <linux/dma-mapping.h>
  18 #include <linux/pci.h>
  19
  20 #include <pcmcia/cs_types.h>
  21 #include <pcmcia/cs.h>
  22 #include <pcmcia/cistpl.h>
  23 #include <pcmcia/ds.h>
  24
  25
  26 MODULE_DESCRIPTION("Sonics Silicon Backplane driver");
  27 MODULE_LICENSE("GPL");
  28
  29
  30 /* Temporary list of yet-to-be-attached buses */
  31 static LIST_HEAD(attach_queue);
  32 /* List if running buses */
  33 static LIST_HEAD(buses);
  34 /* Software ID counter */
  35 static unsigned int next_busnumber;
  36 /* buses_mutes locks the two buslists and the next_busnumber.
  37  * Don't lock this directly, but use ssb_buses_[un]lock() below. */
  38 static DEFINE_MUTEX(buses_mutex);
  39
  40 /* There are differences in the codeflow, if the bus is
  41  * initialized from early boot, as various needed services
  42  * are not available early. This is a mechanism to delay
  43  * these initializations to after early boot has finished.
  44  * It's also used to avoid mutex locking, as that's not
  45  * available and needed early. */
  46 static bool ssb_is_early_boot = 1;
  47
  48 static void ssb_buses_lock(void);
  49 static void ssb_buses_unlock(void);
  50
  51
  52 #ifdef CONFIG_SSB_PCIHOST
  53 struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev)
  54 {
  55         struct ssb_bus *bus;
  56
  57         ssb_buses_lock();
  58         list_for_each_entry(bus, &buses, list) {
  59                 if (bus->bustype == SSB_BUSTYPE_PCI &&
  60                     bus->host_pci == pdev)
  61                         goto found;
  62         }
  63         bus = NULL;
  64 found:
  65         ssb_buses_unlock();
  66
  67         return bus;
  68 }
  69 #endif /* CONFIG_SSB_PCIHOST */
  70
  71 static struct ssb_device *ssb_device_get(struct ssb_device *dev)
  72 {
  73         if (dev)
  74                 get_device(dev->dev);
  75         return dev;
  76 }
  77
  78 static void ssb_device_put(struct ssb_device *dev)
  79 {
  80         if (dev)
  81                 put_device(dev->dev);
  82 }
  83
  84 static int ssb_bus_resume(struct ssb_bus *bus)
  85 {
  86         int err;
  87
  88         ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
  89         err = ssb_pcmcia_init(bus);
  90         if (err) {
  91                 /* No need to disable XTAL, as we don't have one on PCMCIA. */
  92                 return err;
  93         }
  94         ssb_chipco_resume(&bus->chipco);
  95
  96         return 0;
  97 }
  98
  99 static int ssb_device_resume(struct device *dev)
 100 {
 101         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 102         struct ssb_driver *ssb_drv;
 103         struct ssb_bus *bus;
 104         int err = 0;
 105
 106         bus = ssb_dev->bus;
 107         if (bus->suspend_cnt == bus->nr_devices) {
 108                 err = ssb_bus_resume(bus);
 109                 if (err)
 110                         return err;
 111         }
 112         bus->suspend_cnt--;
 113         if (dev->driver) {
 114                 ssb_drv = drv_to_ssb_drv(dev->driver);
 115                 if (ssb_drv && ssb_drv->resume)
 116                         err = ssb_drv->resume(ssb_dev);
 117                 if (err)
 118                         goto out;
 119         }
 120 out:
 121         return err;
 122 }
 123
 124 static void ssb_bus_suspend(struct ssb_bus *bus, pm_message_t state)
 125 {
 126         ssb_chipco_suspend(&bus->chipco, state);
 127         ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
 128
 129         /* Reset HW state information in memory, so that HW is
 130          * completely reinitialized on resume. */
 131         bus->mapped_device = NULL;
 132 #ifdef CONFIG_SSB_DRIVER_PCICORE
 133         bus->pcicore.setup_done = 0;
 134 #endif
 135 #ifdef CONFIG_SSB_DEBUG
 136         bus->powered_up = 0;
 137 #endif
 138 }
 139
 140 static int ssb_device_suspend(struct device *dev, pm_message_t state)
 141 {
 142         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 143         struct ssb_driver *ssb_drv;
 144         struct ssb_bus *bus;
 145         int err = 0;
 146
 147         if (dev->driver) {
 148                 ssb_drv = drv_to_ssb_drv(dev->driver);
 149                 if (ssb_drv && ssb_drv->suspend)
 150                         err = ssb_drv->suspend(ssb_dev, state);
 151                 if (err)
 152                         goto out;
 153         }
 154
 155         bus = ssb_dev->bus;
 156         bus->suspend_cnt++;
 157         if (bus->suspend_cnt == bus->nr_devices) {
 158                 /* All devices suspended. Shutdown the bus. */
 159                 ssb_bus_suspend(bus, state);
 160         }
 161
 162 out:
 163         return err;
 164 }
 165
 166 #ifdef CONFIG_SSB_PCIHOST
 167 int ssb_devices_freeze(struct ssb_bus *bus)
 168 {
 169         struct ssb_device *dev;
 170         struct ssb_driver *drv;
 171         int err = 0;
 172         int i;
 173         pm_message_t state = PMSG_FREEZE;
 174
 175         /* First check that we are capable to freeze all devices. */
 176         for (i = 0; i < bus->nr_devices; i++) {
 177                 dev = &(bus->devices[i]);
 178                 if (!dev->dev ||
 179                     !dev->dev->driver ||
 180                     !device_is_registered(dev->dev))
 181                         continue;
 182                 drv = drv_to_ssb_drv(dev->dev->driver);
 183                 if (!drv)
 184                         continue;
 185                 if (!drv->suspend) {
 186                         /* Nope, can't suspend this one. */
 187                         return -EOPNOTSUPP;
 188                 }
 189         }
 190         /* Now suspend all devices */
 191         for (i = 0; i < bus->nr_devices; i++) {
 192                 dev = &(bus->devices[i]);
 193                 if (!dev->dev ||
 194                     !dev->dev->driver ||
 195                     !device_is_registered(dev->dev))
 196                         continue;
 197                 drv = drv_to_ssb_drv(dev->dev->driver);
 198                 if (!drv)
 199                         continue;
 200                 err = drv->suspend(dev, state);
 201                 if (err) {
 202                         ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n",
 203                                    dev->dev->bus_id);
 204                         goto err_unwind;
 205                 }
 206         }
 207
 208         return 0;
 209 err_unwind:
 210         for (i--; i >= 0; i--) {
 211                 dev = &(bus->devices[i]);
 212                 if (!dev->dev ||
 213                     !dev->dev->driver ||
 214                     !device_is_registered(dev->dev))
 215                         continue;
 216                 drv = drv_to_ssb_drv(dev->dev->driver);
 217                 if (!drv)
 218                         continue;
 219                 if (drv->resume)
 220                         drv->resume(dev);
 221         }
 222         return err;
 223 }
 224
 225 int ssb_devices_thaw(struct ssb_bus *bus)
 226 {
 227         struct ssb_device *dev;
 228         struct ssb_driver *drv;
 229         int err;
 230         int i;
 231
 232         for (i = 0; i < bus->nr_devices; i++) {
 233                 dev = &(bus->devices[i]);
 234                 if (!dev->dev ||
 235                     !dev->dev->driver ||
 236                     !device_is_registered(dev->dev))
 237                         continue;
 238                 drv = drv_to_ssb_drv(dev->dev->driver);
 239                 if (!drv)
 240                         continue;
 241                 if (SSB_WARN_ON(!drv->resume))
 242                         continue;
 243                 err = drv->resume(dev);
 244                 if (err) {
 245                         ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
 246                                    dev->dev->bus_id);
 247                 }
 248         }
 249
 250         return 0;
 251 }
 252 #endif /* CONFIG_SSB_PCIHOST */
 253
 254 static void ssb_device_shutdown(struct device *dev)
 255 {
 256         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 257         struct ssb_driver *ssb_drv;
 258
 259         if (!dev->driver)
 260                 return;
 261         ssb_drv = drv_to_ssb_drv(dev->driver);
 262         if (ssb_drv && ssb_drv->shutdown)
 263                 ssb_drv->shutdown(ssb_dev);
 264 }
 265
 266 static int ssb_device_remove(struct device *dev)
 267 {
 268         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 269         struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver);
 270
 271         if (ssb_drv && ssb_drv->remove)
 272                 ssb_drv->remove(ssb_dev);
 273         ssb_device_put(ssb_dev);
 274
 275         return 0;
 276 }
 277
 278 static int ssb_device_probe(struct device *dev)
 279 {
 280         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 281         struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver);
 282         int err = 0;
 283
 284         ssb_device_get(ssb_dev);
 285         if (ssb_drv && ssb_drv->probe)
 286                 err = ssb_drv->probe(ssb_dev, &ssb_dev->id);
 287         if (err)
 288                 ssb_device_put(ssb_dev);
 289
 290         return err;
 291 }
 292
 293 static int ssb_match_devid(const struct ssb_device_id *tabid,
 294                            const struct ssb_device_id *devid)
 295 {
 296         if ((tabid->vendor != devid->vendor) &&
 297             tabid->vendor != SSB_ANY_VENDOR)
 298                 return 0;
 299         if ((tabid->coreid != devid->coreid) &&
 300             tabid->coreid != SSB_ANY_ID)
 301                 return 0;
 302         if ((tabid->revision != devid->revision) &&
 303             tabid->revision != SSB_ANY_REV)
 304                 return 0;
 305         return 1;
 306 }
 307
 308 static int ssb_bus_match(struct device *dev, struct device_driver *drv)
 309 {
 310         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 311         struct ssb_driver *ssb_drv = drv_to_ssb_drv(drv);
 312         const struct ssb_device_id *id;
 313
 314         for (id = ssb_drv->id_table;
 315              id->vendor || id->coreid || id->revision;
 316              id++) {
 317                 if (ssb_match_devid(id, &ssb_dev->id))
 318                         return 1; /* found */
 319         }
 320
 321         return 0;
 322 }
 323
 324 static int ssb_device_uevent(struct device *dev, struct kobj_uevent_env *env)
 325 {
 326         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 327
 328         if (!dev)
 329                 return -ENODEV;
 330
 331         return add_uevent_var(env,
 332                              "MODALIAS=ssb:v%04Xid%04Xrev%02X",
 333                              ssb_dev->id.vendor, ssb_dev->id.coreid,
 334                              ssb_dev->id.revision);
 335 }
 336
 337 static struct bus_type ssb_bustype = {
 338         .name           = "ssb",
 339         .match          = ssb_bus_match,
 340         .probe          = ssb_device_probe,
 341         .remove         = ssb_device_remove,
 342         .shutdown       = ssb_device_shutdown,
 343         .suspend        = ssb_device_suspend,
 344         .resume         = ssb_device_resume,
 345         .uevent         = ssb_device_uevent,
 346 };
 347
 348 static void ssb_buses_lock(void)
 349 {
 350         /* See the comment at the ssb_is_early_boot definition */
 351         if (!ssb_is_early_boot)
 352                 mutex_lock(&buses_mutex);
 353 }
 354
 355 static void ssb_buses_unlock(void)
 356 {
 357         /* See the comment at the ssb_is_early_boot definition */
 358         if (!ssb_is_early_boot)
 359                 mutex_unlock(&buses_mutex);
 360 }
 361
 362 static void ssb_devices_unregister(struct ssb_bus *bus)
 363 {
 364         struct ssb_device *sdev;
 365         int i;
 366
 367         for (i = bus->nr_devices - 1; i >= 0; i--) {
 368                 sdev = &(bus->devices[i]);
 369                 if (sdev->dev)
 370                         device_unregister(sdev->dev);
 371         }
 372 }
 373
 374 void ssb_bus_unregister(struct ssb_bus *bus)
 375 {
 376         ssb_buses_lock();
 377         ssb_devices_unregister(bus);
 378         list_del(&bus->list);
 379         ssb_buses_unlock();
 380
 381         /* ssb_pcmcia_exit(bus); */
 382         ssb_pci_exit(bus);
 383         ssb_iounmap(bus);
 384 }
 385 EXPORT_SYMBOL(ssb_bus_unregister);
 386
 387 static void ssb_release_dev(struct device *dev)
 388 {
 389         struct __ssb_dev_wrapper *devwrap;
 390
 391         devwrap = container_of(dev, struct __ssb_dev_wrapper, dev);
 392         kfree(devwrap);
 393 }
 394
 395 static int ssb_devices_register(struct ssb_bus *bus)
 396 {
 397         struct ssb_device *sdev;
 398         struct device *dev;
 399         struct __ssb_dev_wrapper *devwrap;
 400         int i, err = 0;
 401         int dev_idx = 0;
 402
 403         for (i = 0; i < bus->nr_devices; i++) {
 404                 sdev = &(bus->devices[i]);
 405
 406                 /* We don't register SSB-system devices to the kernel,
 407                  * as the drivers for them are built into SSB. */
 408                 switch (sdev->id.coreid) {
 409                 case SSB_DEV_CHIPCOMMON:
 410                 case SSB_DEV_PCI:
 411                 case SSB_DEV_PCIE:
 412                 case SSB_DEV_PCMCIA:
 413                 case SSB_DEV_MIPS:
 414                 case SSB_DEV_MIPS_3302:
 415                 case SSB_DEV_EXTIF:
 416                         continue;
 417                 }
 418
 419                 devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL);
 420                 if (!devwrap) {
 421                         ssb_printk(KERN_ERR PFX
 422                                    "Could not allocate device\n");
 423                         err = -ENOMEM;
 424                         goto error;
 425                 }
 426                 dev = &devwrap->dev;
 427                 devwrap->sdev = sdev;
 428
 429                 dev->release = ssb_release_dev;
 430                 dev->bus = &ssb_bustype;
 431                 snprintf(dev->bus_id, sizeof(dev->bus_id),
 432                          "ssb%u:%d", bus->busnumber, dev_idx);
 433
 434                 switch (bus->bustype) {
 435                 case SSB_BUSTYPE_PCI:
 436 #ifdef CONFIG_SSB_PCIHOST
 437                         sdev->irq = bus->host_pci->irq;
 438                         dev->parent = &bus->host_pci->dev;
 439 #endif
 440                         break;
 441                 case SSB_BUSTYPE_PCMCIA:
 442 #ifdef CONFIG_SSB_PCMCIAHOST
 443                         sdev->irq = bus->host_pcmcia->irq.AssignedIRQ;
 444                         dev->parent = &bus->host_pcmcia->dev;
 445 #endif
 446                         break;
 447                 case SSB_BUSTYPE_SSB:
 448                         break;
 449                 }
 450
 451                 sdev->dev = dev;
 452                 err = device_register(dev);
 453                 if (err) {
 454                         ssb_printk(KERN_ERR PFX
 455                                    "Could not register %s\n",
 456                                    dev->bus_id);
 457                         /* Set dev to NULL to not unregister
 458                          * dev on error unwinding. */
 459                         sdev->dev = NULL;
 460                         kfree(devwrap);
 461                         goto error;
 462                 }
 463                 dev_idx++;
 464         }
 465
 466         return 0;
 467 error:
 468         /* Unwind the already registered devices. */
 469         ssb_devices_unregister(bus);
 470         return err;
 471 }
 472
 473 /* Needs ssb_buses_lock() */
 474 static int ssb_attach_queued_buses(void)
 475 {
 476         struct ssb_bus *bus, *n;
 477         int err = 0;
 478         int drop_them_all = 0;
 479
 480         list_for_each_entry_safe(bus, n, &attach_queue, list) {
 481                 if (drop_them_all) {
 482                         list_del(&bus->list);
 483                         continue;
 484                 }
 485                 /* Can't init the PCIcore in ssb_bus_register(), as that
 486                  * is too early in boot for embedded systems
 487                  * (no udelay() available). So do it here in attach stage.
 488                  */
 489                 err = ssb_bus_powerup(bus, 0);
 490                 if (err)
 491                         goto error;
 492                 ssb_pcicore_init(&bus->pcicore);
 493                 ssb_bus_may_powerdown(bus);
 494
 495                 err = ssb_devices_register(bus);
 496 error:
 497                 if (err) {
 498                         drop_them_all = 1;
 499                         list_del(&bus->list);
 500                         continue;
 501                 }
 502                 list_move_tail(&bus->list, &buses);
 503         }
 504
 505         return err;
 506 }
 507
 508 static u16 ssb_ssb_read16(struct ssb_device *dev, u16 offset)
 509 {
 510         struct ssb_bus *bus = dev->bus;
 511
 512         offset += dev->core_index * SSB_CORE_SIZE;
 513         return readw(bus->mmio + offset);
 514 }
 515
 516 static u32 ssb_ssb_read32(struct ssb_device *dev, u16 offset)
 517 {
 518         struct ssb_bus *bus = dev->bus;
 519
 520         offset += dev->core_index * SSB_CORE_SIZE;
 521         return readl(bus->mmio + offset);
 522 }
 523
 524 static void ssb_ssb_write16(struct ssb_device *dev, u16 offset, u16 value)
 525 {
 526         struct ssb_bus *bus = dev->bus;
 527
 528         offset += dev->core_index * SSB_CORE_SIZE;
 529         writew(value, bus->mmio + offset);
 530 }
 531
 532 static void ssb_ssb_write32(struct ssb_device *dev, u16 offset, u32 value)
 533 {
 534         struct ssb_bus *bus = dev->bus;
 535
 536         offset += dev->core_index * SSB_CORE_SIZE;
 537         writel(value, bus->mmio + offset);
 538 }
 539
 540 /* Ops for the plain SSB bus without a host-device (no PCI or PCMCIA). */
 541 static const struct ssb_bus_ops ssb_ssb_ops = {
 542         .read16         = ssb_ssb_read16,
 543         .read32         = ssb_ssb_read32,
 544         .write16        = ssb_ssb_write16,
 545         .write32        = ssb_ssb_write32,
 546 };
 547
 548 static int ssb_fetch_invariants(struct ssb_bus *bus,
 549                                 ssb_invariants_func_t get_invariants)
 550 {
 551         struct ssb_init_invariants iv;
 552         int err;
 553
 554         memset(&iv, 0, sizeof(iv));
 555         err = get_invariants(bus, &iv);
 556         if (err)
 557                 goto out;
 558         memcpy(&bus->boardinfo, &iv.boardinfo, sizeof(iv.boardinfo));
 559         memcpy(&bus->sprom, &iv.sprom, sizeof(iv.sprom));
 560 out:
 561         return err;
 562 }
 563
 564 static int ssb_bus_register(struct ssb_bus *bus,
 565                             ssb_invariants_func_t get_invariants,
 566                             unsigned long baseaddr)
 567 {
 568         int err;
 569
 570         spin_lock_init(&bus->bar_lock);
 571         INIT_LIST_HEAD(&bus->list);
 572
 573         /* Powerup the bus */
 574         err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
 575         if (err)
 576                 goto out;
 577         ssb_buses_lock();
 578         bus->busnumber = next_busnumber;
 579         /* Scan for devices (cores) */
 580         err = ssb_bus_scan(bus, baseaddr);
 581         if (err)
 582                 goto err_disable_xtal;
 583
 584         /* Init PCI-host device (if any) */
 585         err = ssb_pci_init(bus);
 586         if (err)
 587                 goto err_unmap;
 588         /* Init PCMCIA-host device (if any) */
 589         err = ssb_pcmcia_init(bus);
 590         if (err)
 591                 goto err_pci_exit;
 592
 593         /* Initialize basic system devices (if available) */
 594         err = ssb_bus_powerup(bus, 0);
 595         if (err)
 596                 goto err_pcmcia_exit;
 597         ssb_chipcommon_init(&bus->chipco);
 598         ssb_mipscore_init(&bus->mipscore);
 599         err = ssb_fetch_invariants(bus, get_invariants);
 600         if (err) {
 601                 ssb_bus_may_powerdown(bus);
 602                 goto err_pcmcia_exit;
 603         }
 604         ssb_bus_may_powerdown(bus);
 605
 606         /* Queue it for attach.
 607          * See the comment at the ssb_is_early_boot definition. */
 608         list_add_tail(&bus->list, &attach_queue);
 609         if (!ssb_is_early_boot) {
 610                 /* This is not early boot, so we must attach the bus now */
 611                 err = ssb_attach_queued_buses();
 612                 if (err)
 613                         goto err_dequeue;
 614         }
 615         next_busnumber++;
 616         ssb_buses_unlock();
 617
 618 out:
 619         return err;
 620
 621 err_dequeue:
 622         list_del(&bus->list);
 623 err_pcmcia_exit:
 624 /*      ssb_pcmcia_exit(bus); */
 625 err_pci_exit:
 626         ssb_pci_exit(bus);
 627 err_unmap:
 628         ssb_iounmap(bus);
 629 err_disable_xtal:
 630         ssb_buses_unlock();
 631         ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
 632         return err;
 633 }
 634
 635 #ifdef CONFIG_SSB_PCIHOST
 636 int ssb_bus_pcibus_register(struct ssb_bus *bus,
 637                             struct pci_dev *host_pci)
 638 {
 639         int err;
 640
 641         bus->bustype = SSB_BUSTYPE_PCI;
 642         bus->host_pci = host_pci;
 643         bus->ops = &ssb_pci_ops;
 644
 645         err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
 646         if (!err) {
 647                 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
 648                            "PCI device %s\n", host_pci->dev.bus_id);
 649         }
 650
 651         return err;
 652 }
 653 EXPORT_SYMBOL(ssb_bus_pcibus_register);
 654 #endif /* CONFIG_SSB_PCIHOST */
 655
 656 #ifdef CONFIG_SSB_PCMCIAHOST
 657 int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
 658                                struct pcmcia_device *pcmcia_dev,
 659                                unsigned long baseaddr)
 660 {
 661         int err;
 662
 663         bus->bustype = SSB_BUSTYPE_PCMCIA;
 664         bus->host_pcmcia = pcmcia_dev;
 665         bus->ops = &ssb_pcmcia_ops;
 666
 667         err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
 668         if (!err) {
 669                 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
 670                            "PCMCIA device %s\n", pcmcia_dev->devname);
 671         }
 672
 673         return err;
 674 }
 675 EXPORT_SYMBOL(ssb_bus_pcmciabus_register);
 676 #endif /* CONFIG_SSB_PCMCIAHOST */
 677
 678 int ssb_bus_ssbbus_register(struct ssb_bus *bus,
 679                             unsigned long baseaddr,
 680                             ssb_invariants_func_t get_invariants)
 681 {
 682         int err;
 683
 684         bus->bustype = SSB_BUSTYPE_SSB;
 685         bus->ops = &ssb_ssb_ops;
 686
 687         err = ssb_bus_register(bus, get_invariants, baseaddr);
 688         if (!err) {
 689                 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at "
 690                            "address 0x%08lX\n", baseaddr);
 691         }
 692
 693         return err;
 694 }
 695
 696 int __ssb_driver_register(struct ssb_driver *drv, struct module *owner)
 697 {
 698         drv->drv.name = drv->name;
 699         drv->drv.bus = &ssb_bustype;
 700         drv->drv.owner = owner;
 701
 702         return driver_register(&drv->drv);
 703 }
 704 EXPORT_SYMBOL(__ssb_driver_register);
 705
 706 void ssb_driver_unregister(struct ssb_driver *drv)
 707 {
 708         driver_unregister(&drv->drv);
 709 }
 710 EXPORT_SYMBOL(ssb_driver_unregister);
 711
 712 void ssb_set_devtypedata(struct ssb_device *dev, void *data)
 713 {
 714         struct ssb_bus *bus = dev->bus;
 715         struct ssb_device *ent;
 716         int i;
 717
 718         for (i = 0; i < bus->nr_devices; i++) {
 719                 ent = &(bus->devices[i]);
 720                 if (ent->id.vendor != dev->id.vendor)
 721                         continue;
 722                 if (ent->id.coreid != dev->id.coreid)
 723                         continue;
 724
 725                 ent->devtypedata = data;
 726         }
 727 }
 728 EXPORT_SYMBOL(ssb_set_devtypedata);
 729
 730 static u32 clkfactor_f6_resolve(u32 v)
 731 {
 732         /* map the magic values */
 733         switch (v) {
 734         case SSB_CHIPCO_CLK_F6_2:
 735                 return 2;
 736         case SSB_CHIPCO_CLK_F6_3:
 737                 return 3;
 738         case SSB_CHIPCO_CLK_F6_4:
 739                 return 4;
 740         case SSB_CHIPCO_CLK_F6_5:
 741                 return 5;
 742         case SSB_CHIPCO_CLK_F6_6:
 743                 return 6;
 744         case SSB_CHIPCO_CLK_F6_7:
 745                 return 7;
 746         }
 747         return 0;
 748 }
 749
 750 /* Calculate the speed the backplane would run at a given set of clockcontrol values */
 751 u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m)
 752 {
 753         u32 n1, n2, clock, m1, m2, m3, mc;
 754
 755         n1 = (n & SSB_CHIPCO_CLK_N1);
 756         n2 = ((n & SSB_CHIPCO_CLK_N2) >> SSB_CHIPCO_CLK_N2_SHIFT);
 757
 758         switch (plltype) {
 759         case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
 760                 if (m & SSB_CHIPCO_CLK_T6_MMASK)
 761                         return SSB_CHIPCO_CLK_T6_M0;
 762                 return SSB_CHIPCO_CLK_T6_M1;
 763         case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
 764         case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
 765         case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
 766         case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
 767                 n1 = clkfactor_f6_resolve(n1);
 768                 n2 += SSB_CHIPCO_CLK_F5_BIAS;
 769                 break;
 770         case SSB_PLLTYPE_2: /* 48Mhz, 4 dividers */
 771                 n1 += SSB_CHIPCO_CLK_T2_BIAS;
 772                 n2 += SSB_CHIPCO_CLK_T2_BIAS;
 773                 SSB_WARN_ON(!((n1 >= 2) && (n1 <= 7)));
 774                 SSB_WARN_ON(!((n2 >= 5) && (n2 <= 23)));
 775                 break;
 776         case SSB_PLLTYPE_5: /* 25Mhz, 4 dividers */
 777                 return 100000000;
 778         default:
 779                 SSB_WARN_ON(1);
 780         }
 781
 782         switch (plltype) {
 783         case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
 784         case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
 785                 clock = SSB_CHIPCO_CLK_BASE2 * n1 * n2;
 786                 break;
 787         default:
 788                 clock = SSB_CHIPCO_CLK_BASE1 * n1 * n2;
 789         }
 790         if (!clock)
 791                 return 0;
 792
 793         m1 = (m & SSB_CHIPCO_CLK_M1);
 794         m2 = ((m & SSB_CHIPCO_CLK_M2) >> SSB_CHIPCO_CLK_M2_SHIFT);
 795         m3 = ((m & SSB_CHIPCO_CLK_M3) >> SSB_CHIPCO_CLK_M3_SHIFT);
 796         mc = ((m & SSB_CHIPCO_CLK_MC) >> SSB_CHIPCO_CLK_MC_SHIFT);
 797
 798         switch (plltype) {
 799         case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
 800         case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
 801         case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
 802         case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
 803                 m1 = clkfactor_f6_resolve(m1);
 804                 if ((plltype == SSB_PLLTYPE_1) ||
 805                     (plltype == SSB_PLLTYPE_3))
 806                         m2 += SSB_CHIPCO_CLK_F5_BIAS;
 807                 else
 808                         m2 = clkfactor_f6_resolve(m2);
 809                 m3 = clkfactor_f6_resolve(m3);
 810
 811                 switch (mc) {
 812                 case SSB_CHIPCO_CLK_MC_BYPASS:
 813                         return clock;
 814                 case SSB_CHIPCO_CLK_MC_M1:
 815                         return (clock / m1);
 816                 case SSB_CHIPCO_CLK_MC_M1M2:
 817                         return (clock / (m1 * m2));
 818                 case SSB_CHIPCO_CLK_MC_M1M2M3:
 819                         return (clock / (m1 * m2 * m3));
 820                 case SSB_CHIPCO_CLK_MC_M1M3:
 821                         return (clock / (m1 * m3));
 822                 }
 823                 return 0;
 824         case SSB_PLLTYPE_2:
 825                 m1 += SSB_CHIPCO_CLK_T2_BIAS;
 826                 m2 += SSB_CHIPCO_CLK_T2M2_BIAS;
 827                 m3 += SSB_CHIPCO_CLK_T2_BIAS;
 828                 SSB_WARN_ON(!((m1 >= 2) && (m1 <= 7)));
 829                 SSB_WARN_ON(!((m2 >= 3) && (m2 <= 10)));
 830                 SSB_WARN_ON(!((m3 >= 2) && (m3 <= 7)));
 831
 832                 if (!(mc & SSB_CHIPCO_CLK_T2MC_M1BYP))
 833                         clock /= m1;
 834                 if (!(mc & SSB_CHIPCO_CLK_T2MC_M2BYP))
 835                         clock /= m2;
 836                 if (!(mc & SSB_CHIPCO_CLK_T2MC_M3BYP))
 837                         clock /= m3;
 838                 return clock;
 839         default:
 840                 SSB_WARN_ON(1);
 841         }
 842         return 0;
 843 }
 844
 845 /* Get the current speed the backplane is running at */
 846 u32 ssb_clockspeed(struct ssb_bus *bus)
 847 {
 848         u32 rate;
 849         u32 plltype;
 850         u32 clkctl_n, clkctl_m;
 851
 852         if (ssb_extif_available(&bus->extif))
 853                 ssb_extif_get_clockcontrol(&bus->extif, &plltype,
 854                                            &clkctl_n, &clkctl_m);
 855         else if (bus->chipco.dev)
 856                 ssb_chipco_get_clockcontrol(&bus->chipco, &plltype,
 857                                             &clkctl_n, &clkctl_m);
 858         else
 859                 return 0;
 860
 861         if (bus->chip_id == 0x5365) {
 862                 rate = 100000000;
 863         } else {
 864                 rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m);
 865                 if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */
 866                         rate /= 2;
 867         }
 868
 869         return rate;
 870 }
 871 EXPORT_SYMBOL(ssb_clockspeed);
 872
 873 static u32 ssb_tmslow_reject_bitmask(struct ssb_device *dev)
 874 {
 875         /* The REJECT bit changed position in TMSLOW between
 876          * Backplane revisions. */
 877         switch (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV) {
 878         case SSB_IDLOW_SSBREV_22:
 879                 return SSB_TMSLOW_REJECT_22;
 880         case SSB_IDLOW_SSBREV_23:
 881                 return SSB_TMSLOW_REJECT_23;
 882         default:
 883                 WARN_ON(1);
 884         }
 885         return (SSB_TMSLOW_REJECT_22 | SSB_TMSLOW_REJECT_23);
 886 }
 887
 888 int ssb_device_is_enabled(struct ssb_device *dev)
 889 {
 890         u32 val;
 891         u32 reject;
 892
 893         reject = ssb_tmslow_reject_bitmask(dev);
 894         val = ssb_read32(dev, SSB_TMSLOW);
 895         val &= SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET | reject;
 896
 897         return (val == SSB_TMSLOW_CLOCK);
 898 }
 899 EXPORT_SYMBOL(ssb_device_is_enabled);
 900
 901 static void ssb_flush_tmslow(struct ssb_device *dev)
 902 {
 903         /* Make _really_ sure the device has finished the TMSLOW
 904          * register write transaction, as we risk running into
 905          * a machine check exception otherwise.
 906          * Do this by reading the register back to commit the
 907          * PCI write and delay an additional usec for the device
 908          * to react to the change. */
 909         ssb_read32(dev, SSB_TMSLOW);
 910         udelay(1);
 911 }
 912
 913 void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags)
 914 {
 915         u32 val;
 916
 917         ssb_device_disable(dev, core_specific_flags);
 918         ssb_write32(dev, SSB_TMSLOW,
 919                     SSB_TMSLOW_RESET | SSB_TMSLOW_CLOCK |
 920                     SSB_TMSLOW_FGC | core_specific_flags);
 921         ssb_flush_tmslow(dev);
 922
 923         /* Clear SERR if set. This is a hw bug workaround. */
 924         if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_SERR)
 925                 ssb_write32(dev, SSB_TMSHIGH, 0);
 926
 927         val = ssb_read32(dev, SSB_IMSTATE);
 928         if (val & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO)) {
 929                 val &= ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO);
 930                 ssb_write32(dev, SSB_IMSTATE, val);
 931         }
 932
 933         ssb_write32(dev, SSB_TMSLOW,
 934                     SSB_TMSLOW_CLOCK | SSB_TMSLOW_FGC |
 935                     core_specific_flags);
 936         ssb_flush_tmslow(dev);
 937
 938         ssb_write32(dev, SSB_TMSLOW, SSB_TMSLOW_CLOCK |
 939                     core_specific_flags);
 940         ssb_flush_tmslow(dev);
 941 }
 942 EXPORT_SYMBOL(ssb_device_enable);
 943
 944 /* Wait for a bit in a register to get set or unset.
 945  * timeout is in units of ten-microseconds */
 946 static int ssb_wait_bit(struct ssb_device *dev, u16 reg, u32 bitmask,
 947                         int timeout, int set)
 948 {
 949         int i;
 950         u32 val;
 951
 952         for (i = 0; i < timeout; i++) {
 953                 val = ssb_read32(dev, reg);
 954                 if (set) {
 955                         if (val & bitmask)
 956                                 return 0;
 957                 } else {
 958                         if (!(val & bitmask))
 959                                 return 0;
 960                 }
 961                 udelay(10);
 962         }
 963         printk(KERN_ERR PFX "Timeout waiting for bitmask %08X on "
 964                             "register %04X to %s.\n",
 965                bitmask, reg, (set ? "set" : "clear"));
 966
 967         return -ETIMEDOUT;
 968 }
 969
 970 void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags)
 971 {
 972         u32 reject;
 973
 974         if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET)
 975                 return;
 976
 977         reject = ssb_tmslow_reject_bitmask(dev);
 978         ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
 979         ssb_wait_bit(dev, SSB_TMSLOW, reject, 1000, 1);
 980         ssb_wait_bit(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
 981         ssb_write32(dev, SSB_TMSLOW,
 982                     SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
 983                     reject | SSB_TMSLOW_RESET |
 984                     core_specific_flags);
 985         ssb_flush_tmslow(dev);
 986
 987         ssb_write32(dev, SSB_TMSLOW,
 988                     reject | SSB_TMSLOW_RESET |
 989                     core_specific_flags);
 990         ssb_flush_tmslow(dev);
 991 }
 992 EXPORT_SYMBOL(ssb_device_disable);
 993
 994 u32 ssb_dma_translation(struct ssb_device *dev)
 995 {
 996         switch (dev->bus->bustype) {
 997         case SSB_BUSTYPE_SSB:
 998                 return 0;
 999         case SSB_BUSTYPE_PCI:
1000         case SSB_BUSTYPE_PCMCIA:
1001                 return SSB_PCI_DMA;
1002         }
1003         return 0;
1004 }
1005 EXPORT_SYMBOL(ssb_dma_translation);
1006
1007 int ssb_dma_set_mask(struct ssb_device *ssb_dev, u64 mask)
1008 {
1009         struct device *dev = ssb_dev->dev;
1010
1011 #ifdef CONFIG_SSB_PCIHOST
1012         if (ssb_dev->bus->bustype == SSB_BUSTYPE_PCI &&
1013             !dma_supported(dev, mask))
1014                 return -EIO;
1015 #endif
1016         dev->coherent_dma_mask = mask;
1017         dev->dma_mask = &dev->coherent_dma_mask;
1018
1019         return 0;
1020 }
1021 EXPORT_SYMBOL(ssb_dma_set_mask);
1022
1023 int ssb_bus_may_powerdown(struct ssb_bus *bus)
1024 {
1025         struct ssb_chipcommon *cc;
1026         int err = 0;
1027
1028         /* On buses where more than one core may be working
1029          * at a time, we must not powerdown stuff if there are
1030          * still cores that may want to run. */
1031         if (bus->bustype == SSB_BUSTYPE_SSB)
1032                 goto out;
1033
1034         cc = &bus->chipco;
1035         ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW);
1036         err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
1037         if (err)
1038                 goto error;
1039 out:
1040 #ifdef CONFIG_SSB_DEBUG
1041         bus->powered_up = 0;
1042 #endif
1043         return err;
1044 error:
1045         ssb_printk(KERN_ERR PFX "Bus powerdown failed\n");
1046         goto out;
1047 }
1048 EXPORT_SYMBOL(ssb_bus_may_powerdown);
1049
1050 int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl)
1051 {
1052         struct ssb_chipcommon *cc;
1053         int err;
1054         enum ssb_clkmode mode;
1055
1056         err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
1057         if (err)
1058                 goto error;
1059         cc = &bus->chipco;
1060         mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
1061         ssb_chipco_set_clockmode(cc, mode);
1062
1063 #ifdef CONFIG_SSB_DEBUG
1064         bus->powered_up = 1;
1065 #endif
1066         return 0;
1067 error:
1068         ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
1069         return err;
1070 }
1071 EXPORT_SYMBOL(ssb_bus_powerup);
1072
1073 u32 ssb_admatch_base(u32 adm)
1074 {
1075         u32 base = 0;
1076
1077         switch (adm & SSB_ADM_TYPE) {
1078         case SSB_ADM_TYPE0:
1079                 base = (adm & SSB_ADM_BASE0);
1080                 break;
1081         case SSB_ADM_TYPE1:
1082                 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
1083                 base = (adm & SSB_ADM_BASE1);
1084                 break;
1085         case SSB_ADM_TYPE2:
1086                 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
1087                 base = (adm & SSB_ADM_BASE2);
1088                 break;
1089         default:
1090                 SSB_WARN_ON(1);
1091         }
1092
1093         return base;
1094 }
1095 EXPORT_SYMBOL(ssb_admatch_base);
1096
1097 u32 ssb_admatch_size(u32 adm)
1098 {
1099         u32 size = 0;
1100
1101         switch (adm & SSB_ADM_TYPE) {
1102         case SSB_ADM_TYPE0:
1103                 size = ((adm & SSB_ADM_SZ0) >> SSB_ADM_SZ0_SHIFT);
1104                 break;
1105         case SSB_ADM_TYPE1:
1106                 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
1107                 size = ((adm & SSB_ADM_SZ1) >> SSB_ADM_SZ1_SHIFT);
1108                 break;
1109         case SSB_ADM_TYPE2:
1110                 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
1111                 size = ((adm & SSB_ADM_SZ2) >> SSB_ADM_SZ2_SHIFT);
1112                 break;
1113         default:
1114                 SSB_WARN_ON(1);
1115         }
1116         size = (1 << (size + 1));
1117
1118         return size;
1119 }
1120 EXPORT_SYMBOL(ssb_admatch_size);
1121
1122 static int __init ssb_modinit(void)
1123 {
1124         int err;
1125
1126         /* See the comment at the ssb_is_early_boot definition */
1127         ssb_is_early_boot = 0;
1128         err = bus_register(&ssb_bustype);
1129         if (err)
1130                 return err;
1131
1132         /* Maybe we already registered some buses at early boot.
1133          * Check for this and attach them
1134          */
1135         ssb_buses_lock();
1136         err = ssb_attach_queued_buses();
1137         ssb_buses_unlock();
1138         if (err)
1139                 bus_unregister(&ssb_bustype);
1140
1141         err = b43_pci_ssb_bridge_init();
1142         if (err) {
1143                 ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
1144                            "initialization failed");
1145                 /* don't fail SSB init because of this */
1146                 err = 0;
1147         }
1148
1149         return err;
1150 }
1151 /* ssb must be initialized after PCI but before the ssb drivers.
1152  * That means we must use some initcall between subsys_initcall
1153  * and device_initcall. */
1154 fs_initcall(ssb_modinit);
1155
1156 static void __exit ssb_modexit(void)
1157 {
1158         b43_pci_ssb_bridge_exit();
1159         bus_unregister(&ssb_bustype);
1160 }
1161 module_exit(ssb_modexit)