SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/serial/serial_cs.c

   1 /*======================================================================
   2
   3     A driver for PCMCIA serial devices
   4
   5     serial_cs.c 1.134 2002/05/04 05:48:53
   6
   7     The contents of this file are subject to the Mozilla Public
   8     License Version 1.1 (the "License"); you may not use this file
   9     except in compliance with the License. You may obtain a copy of
  10     the License at http://www.mozilla.org/MPL/
  11
  12     Software distributed under the License is distributed on an "AS
  13     IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
  14     implied. See the License for the specific language governing
  15     rights and limitations under the License.
  16
  17     The initial developer of the original code is David A. Hinds
  18     <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
  19     are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
  20
  21     Alternatively, the contents of this file may be used under the
  22     terms of the GNU General Public License version 2 (the "GPL"), in which
  23     case the provisions of the GPL are applicable instead of the
  24     above.  If you wish to allow the use of your version of this file
  25     only under the terms of the GPL and not to allow others to use
  26     your version of this file under the MPL, indicate your decision
  27     by deleting the provisions above and replace them with the notice
  28     and other provisions required by the GPL.  If you do not delete
  29     the provisions above, a recipient may use your version of this
  30     file under either the MPL or the GPL.
  31
  32 ======================================================================*/
  33
  34 #include <linux/module.h>
  35 #include <linux/moduleparam.h>
  36 #include <linux/kernel.h>
  37 #include <linux/init.h>
  38 #include <linux/sched.h>
  39 #include <linux/ptrace.h>
  40 #include <linux/slab.h>
  41 #include <linux/string.h>
  42 #include <linux/timer.h>
  43 #include <linux/serial_core.h>
  44 #include <linux/major.h>
  45 #include <asm/io.h>
  46 #include <asm/system.h>
  47
  48 #include <pcmcia/cs_types.h>
  49 #include <pcmcia/cs.h>
  50 #include <pcmcia/cistpl.h>
  51 #include <pcmcia/ciscode.h>
  52 #include <pcmcia/ds.h>
  53 #include <pcmcia/cisreg.h>
  54
  55 #include "8250.h"
  56
  57 #ifdef PCMCIA_DEBUG
  58 static int pc_debug = PCMCIA_DEBUG;
  59 module_param(pc_debug, int, 0644);
  60 #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
  61 static char *version = "serial_cs.c 1.134 2002/05/04 05:48:53 (David Hinds)";
  62 #else
  63 #define DEBUG(n, args...)
  64 #endif
  65
  66 /*====================================================================*/
  67
  68 /* Parameters that can be set with 'insmod' */
  69
  70 /* Enable the speaker? */
  71 static int do_sound = 1;
  72 /* Skip strict UART tests? */
  73 static int buggy_uart;
  74
  75 module_param(do_sound, int, 0444);
  76 module_param(buggy_uart, int, 0444);
  77
  78 /*====================================================================*/
  79
  80 /* Table of multi-port card ID's */
  81
  82 struct multi_id {
  83         u_short manfid;
  84         u_short prodid;
  85         int multi;              /* 1 = multifunction, > 1 = # ports */
  86 };
  87
  88 static const struct multi_id multi_id[] = {
  89         { MANFID_OMEGA,   PRODID_OMEGA_QSP_100,         4 },
  90         { MANFID_QUATECH, PRODID_QUATECH_DUAL_RS232,    2 },
  91         { MANFID_QUATECH, PRODID_QUATECH_DUAL_RS232_D1, 2 },
  92         { MANFID_QUATECH, PRODID_QUATECH_QUAD_RS232,    4 },
  93         { MANFID_SOCKET,  PRODID_SOCKET_DUAL_RS232,     2 },
  94         { MANFID_INTEL,   PRODID_INTEL_DUAL_RS232,      2 },
  95         { MANFID_NATINST, PRODID_NATINST_QUAD_RS232,    4 }
  96 };
  97 #define MULTI_COUNT (sizeof(multi_id)/sizeof(struct multi_id))
  98
  99 struct serial_info {
 100         dev_link_t              link;
 101         int                     ndev;
 102         int                     multi;
 103         int                     slave;
 104         int                     manfid;
 105         dev_node_t              node[4];
 106         int                     line[4];
 107 };
 108
 109 struct serial_cfg_mem {
 110         tuple_t tuple;
 111         cisparse_t parse;
 112         u_char buf[256];
 113 };
 114
 115
 116 static void serial_config(dev_link_t * link);
 117
 118
 119 /*======================================================================
 120
 121     After a card is removed, serial_remove() will unregister
 122     the serial device(s), and release the PCMCIA configuration.
 123
 124 ======================================================================*/
 125
 126 static void serial_remove(dev_link_t *link)
 127 {
 128         struct serial_info *info = link->priv;
 129         int i;
 130
 131         link->state &= ~DEV_PRESENT;
 132
 133         DEBUG(0, "serial_release(0x%p)\n", link);
 134
 135         /*
 136          * Recheck to see if the device is still configured.
 137          */
 138         if (info->link.state & DEV_CONFIG) {
 139                 for (i = 0; i < info->ndev; i++)
 140                         serial8250_unregister_port(info->line[i]);
 141
 142                 info->link.dev = NULL;
 143
 144                 if (!info->slave) {
 145                         pcmcia_release_configuration(info->link.handle);
 146                         pcmcia_release_io(info->link.handle, &info->link.io);
 147                         pcmcia_release_irq(info->link.handle, &info->link.irq);
 148                 }
 149
 150                 info->link.state &= ~DEV_CONFIG;
 151         }
 152 }
 153
 154 static int serial_suspend(struct pcmcia_device *dev)
 155 {
 156         dev_link_t *link = dev_to_instance(dev);
 157         link->state |= DEV_SUSPEND;
 158
 159         if (link->state & DEV_CONFIG) {
 160                 struct serial_info *info = link->priv;
 161                 int i;
 162
 163                 for (i = 0; i < info->ndev; i++)
 164                         serial8250_suspend_port(info->line[i]);
 165
 166                 if (!info->slave)
 167                         pcmcia_release_configuration(link->handle);
 168         }
 169
 170         return 0;
 171 }
 172
 173 static int serial_resume(struct pcmcia_device *dev)
 174 {
 175         dev_link_t *link = dev_to_instance(dev);
 176         link->state &= ~DEV_SUSPEND;
 177
 178         if (DEV_OK(link)) {
 179                 struct serial_info *info = link->priv;
 180                 int i;
 181
 182                 if (!info->slave)
 183                         pcmcia_request_configuration(link->handle, &link->conf);
 184
 185                 for (i = 0; i < info->ndev; i++)
 186                         serial8250_resume_port(info->line[i]);
 187         }
 188
 189         return 0;
 190 }
 191
 192 /*======================================================================
 193
 194     serial_attach() creates an "instance" of the driver, allocating
 195     local data structures for one device.  The device is registered
 196     with Card Services.
 197
 198 ======================================================================*/
 199
 200 static int serial_probe(struct pcmcia_device *p_dev)
 201 {
 202         struct serial_info *info;
 203         dev_link_t *link;
 204
 205         DEBUG(0, "serial_attach()\n");
 206
 207         /* Create new serial device */
 208         info = kmalloc(sizeof (*info), GFP_KERNEL);
 209         if (!info)
 210                 return -ENOMEM;
 211         memset(info, 0, sizeof (*info));
 212         link = &info->link;
 213         link->priv = info;
 214
 215         link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 216         link->io.NumPorts1 = 8;
 217         link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
 218         link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 219         link->conf.Attributes = CONF_ENABLE_IRQ;
 220         if (do_sound) {
 221                 link->conf.Attributes |= CONF_ENABLE_SPKR;
 222                 link->conf.Status = CCSR_AUDIO_ENA;
 223         }
 224         link->conf.IntType = INT_MEMORY_AND_IO;
 225
 226         link->handle = p_dev;
 227         p_dev->instance = link;
 228         link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
 229         serial_config(link);
 230
 231         return 0;
 232 }
 233
 234 /*======================================================================
 235
 236     This deletes a driver "instance".  The device is de-registered
 237     with Card Services.  If it has been released, all local data
 238     structures are freed.  Otherwise, the structures will be freed
 239     when the device is released.
 240
 241 ======================================================================*/
 242
 243 static void serial_detach(struct pcmcia_device *p_dev)
 244 {
 245         dev_link_t *link = dev_to_instance(p_dev);
 246         struct serial_info *info = link->priv;
 247
 248         DEBUG(0, "serial_detach(0x%p)\n", link);
 249
 250         /*
 251          * Ensure any outstanding scheduled tasks are completed.
 252          */
 253         flush_scheduled_work();
 254
 255         /*
 256          * Ensure that the ports have been released.
 257          */
 258         serial_remove(link);
 259
 260         /* free bits */
 261         kfree(info);
 262 }
 263
 264 /*====================================================================*/
 265
 266 static int setup_serial(client_handle_t handle, struct serial_info * info,
 267                         kio_addr_t iobase, int irq)
 268 {
 269         struct uart_port port;
 270         int line;
 271
 272         memset(&port, 0, sizeof (struct uart_port));
 273         port.iobase = iobase;
 274         port.irq = irq;
 275         port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
 276         port.uartclk = 1843200;
 277         port.dev = &handle_to_dev(handle);
 278         if (buggy_uart)
 279                 port.flags |= UPF_BUGGY_UART;
 280         line = serial8250_register_port(&port);
 281         if (line < 0) {
 282                 printk(KERN_NOTICE "serial_cs: serial8250_register_port() at "
 283                        "0x%04lx, irq %d failed\n", (u_long)iobase, irq);
 284                 return -EINVAL;
 285         }
 286
 287         info->line[info->ndev] = line;
 288         sprintf(info->node[info->ndev].dev_name, "ttyS%d", line);
 289         info->node[info->ndev].major = TTY_MAJOR;
 290         info->node[info->ndev].minor = 0x40 + line;
 291         if (info->ndev > 0)
 292                 info->node[info->ndev - 1].next = &info->node[info->ndev];
 293         info->ndev++;
 294
 295         return 0;
 296 }
 297
 298 /*====================================================================*/
 299
 300 static int
 301 first_tuple(client_handle_t handle, tuple_t * tuple, cisparse_t * parse)
 302 {
 303         int i;
 304         i = pcmcia_get_first_tuple(handle, tuple);
 305         if (i != CS_SUCCESS)
 306                 return CS_NO_MORE_ITEMS;
 307         i = pcmcia_get_tuple_data(handle, tuple);
 308         if (i != CS_SUCCESS)
 309                 return i;
 310         return pcmcia_parse_tuple(handle, tuple, parse);
 311 }
 312
 313 static int
 314 next_tuple(client_handle_t handle, tuple_t * tuple, cisparse_t * parse)
 315 {
 316         int i;
 317         i = pcmcia_get_next_tuple(handle, tuple);
 318         if (i != CS_SUCCESS)
 319                 return CS_NO_MORE_ITEMS;
 320         i = pcmcia_get_tuple_data(handle, tuple);
 321         if (i != CS_SUCCESS)
 322                 return i;
 323         return pcmcia_parse_tuple(handle, tuple, parse);
 324 }
 325
 326 /*====================================================================*/
 327
 328 static int simple_config(dev_link_t *link)
 329 {
 330         static const kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
 331         static const int size_table[2] = { 8, 16 };
 332         client_handle_t handle = link->handle;
 333         struct serial_info *info = link->priv;
 334         struct serial_cfg_mem *cfg_mem;
 335         tuple_t *tuple;
 336         u_char *buf;
 337         cisparse_t *parse;
 338         cistpl_cftable_entry_t *cf;
 339         config_info_t config;
 340         int i, j, try;
 341         int s;
 342
 343         cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
 344         if (!cfg_mem)
 345                 return -1;
 346
 347         tuple = &cfg_mem->tuple;
 348         parse = &cfg_mem->parse;
 349         cf = &parse->cftable_entry;
 350         buf = cfg_mem->buf;
 351
 352         /* If the card is already configured, look up the port and irq */
 353         i = pcmcia_get_configuration_info(handle, &config);
 354         if ((i == CS_SUCCESS) && (config.Attributes & CONF_VALID_CLIENT)) {
 355                 kio_addr_t port = 0;
 356                 if ((config.BasePort2 != 0) && (config.NumPorts2 == 8)) {
 357                         port = config.BasePort2;
 358                         info->slave = 1;
 359                 } else if ((info->manfid == MANFID_OSITECH) &&
 360                            (config.NumPorts1 == 0x40)) {
 361                         port = config.BasePort1 + 0x28;
 362                         info->slave = 1;
 363                 }
 364                 if (info->slave) {
 365                         kfree(cfg_mem);
 366                         return setup_serial(handle, info, port, config.AssignedIRQ);
 367                 }
 368         }
 369         link->conf.Vcc = config.Vcc;
 370
 371         /* First pass: look for a config entry that looks normal. */
 372         tuple->TupleData = (cisdata_t *) buf;
 373         tuple->TupleOffset = 0;
 374         tuple->TupleDataMax = 255;
 375         tuple->Attributes = 0;
 376         tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
 377         /* Two tries: without IO aliases, then with aliases */
 378         for (s = 0; s < 2; s++) {
 379                 for (try = 0; try < 2; try++) {
 380                         i = first_tuple(handle, tuple, parse);
 381                         while (i != CS_NO_MORE_ITEMS) {
 382                                 if (i != CS_SUCCESS)
 383                                         goto next_entry;
 384                                 if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
 385                                         link->conf.Vpp1 = link->conf.Vpp2 =
 386                                             cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 387                                 if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[s]) &&
 388                                             (cf->io.win[0].base != 0)) {
 389                                         link->conf.ConfigIndex = cf->index;
 390                                         link->io.BasePort1 = cf->io.win[0].base;
 391                                         link->io.IOAddrLines = (try == 0) ?
 392                                             16 : cf->io.flags & CISTPL_IO_LINES_MASK;
 393                                         i = pcmcia_request_io(link->handle, &link->io);
 394                                         if (i == CS_SUCCESS)
 395                                                 goto found_port;
 396                                 }
 397 next_entry:
 398                                 i = next_tuple(handle, tuple, parse);
 399                         }
 400                 }
 401         }
 402         /* Second pass: try to find an entry that isn't picky about
 403            its base address, then try to grab any standard serial port
 404            address, and finally try to get any free port. */
 405         i = first_tuple(handle, tuple, parse);
 406         while (i != CS_NO_MORE_ITEMS) {
 407                 if ((i == CS_SUCCESS) && (cf->io.nwin > 0) &&
 408                     ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
 409                         link->conf.ConfigIndex = cf->index;
 410                         for (j = 0; j < 5; j++) {
 411                                 link->io.BasePort1 = base[j];
 412                                 link->io.IOAddrLines = base[j] ? 16 : 3;
 413                                 i = pcmcia_request_io(link->handle, &link->io);
 414                                 if (i == CS_SUCCESS)
 415                                         goto found_port;
 416                         }
 417                 }
 418                 i = next_tuple(handle, tuple, parse);
 419         }
 420
 421       found_port:
 422         if (i != CS_SUCCESS) {
 423                 printk(KERN_NOTICE
 424                        "serial_cs: no usable port range found, giving up\n");
 425                 cs_error(link->handle, RequestIO, i);
 426                 kfree(cfg_mem);
 427                 return -1;
 428         }
 429
 430         i = pcmcia_request_irq(link->handle, &link->irq);
 431         if (i != CS_SUCCESS) {
 432                 cs_error(link->handle, RequestIRQ, i);
 433                 link->irq.AssignedIRQ = 0;
 434         }
 435         if (info->multi && (info->manfid == MANFID_3COM))
 436                 link->conf.ConfigIndex &= ~(0x08);
 437         i = pcmcia_request_configuration(link->handle, &link->conf);
 438         if (i != CS_SUCCESS) {
 439                 cs_error(link->handle, RequestConfiguration, i);
 440                 kfree(cfg_mem);
 441                 return -1;
 442         }
 443         kfree(cfg_mem);
 444         return setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ);
 445 }
 446
 447 static int multi_config(dev_link_t * link)
 448 {
 449         client_handle_t handle = link->handle;
 450         struct serial_info *info = link->priv;
 451         struct serial_cfg_mem *cfg_mem;
 452         tuple_t *tuple;
 453         u_char *buf;
 454         cisparse_t *parse;
 455         cistpl_cftable_entry_t *cf;
 456         config_info_t config;
 457         int i, rc, base2 = 0;
 458
 459         cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
 460         if (!cfg_mem)
 461                 return -1;
 462         tuple = &cfg_mem->tuple;
 463         parse = &cfg_mem->parse;
 464         cf = &parse->cftable_entry;
 465         buf = cfg_mem->buf;
 466
 467         i = pcmcia_get_configuration_info(handle, &config);
 468         if (i != CS_SUCCESS) {
 469                 cs_error(handle, GetConfigurationInfo, i);
 470                 rc = -1;
 471                 goto free_cfg_mem;
 472         }
 473         link->conf.Vcc = config.Vcc;
 474
 475         tuple->TupleData = (cisdata_t *) buf;
 476         tuple->TupleOffset = 0;
 477         tuple->TupleDataMax = 255;
 478         tuple->Attributes = 0;
 479         tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
 480
 481         /* First, look for a generic full-sized window */
 482         link->io.NumPorts1 = info->multi * 8;
 483         i = first_tuple(handle, tuple, parse);
 484         while (i != CS_NO_MORE_ITEMS) {
 485                 /* The quad port cards have bad CIS's, so just look for a
 486                    window larger than 8 ports and assume it will be right */
 487                 if ((i == CS_SUCCESS) && (cf->io.nwin == 1) &&
 488                     (cf->io.win[0].len > 8)) {
 489                         link->conf.ConfigIndex = cf->index;
 490                         link->io.BasePort1 = cf->io.win[0].base;
 491                         link->io.IOAddrLines =
 492                             cf->io.flags & CISTPL_IO_LINES_MASK;
 493                         i = pcmcia_request_io(link->handle, &link->io);
 494                         base2 = link->io.BasePort1 + 8;
 495                         if (i == CS_SUCCESS)
 496                                 break;
 497                 }
 498                 i = next_tuple(handle, tuple, parse);
 499         }
 500
 501         /* If that didn't work, look for two windows */
 502         if (i != CS_SUCCESS) {
 503                 link->io.NumPorts1 = link->io.NumPorts2 = 8;
 504                 info->multi = 2;
 505                 i = first_tuple(handle, tuple, parse);
 506                 while (i != CS_NO_MORE_ITEMS) {
 507                         if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) {
 508                                 link->conf.ConfigIndex = cf->index;
 509                                 link->io.BasePort1 = cf->io.win[0].base;
 510                                 link->io.BasePort2 = cf->io.win[1].base;
 511                                 link->io.IOAddrLines =
 512                                     cf->io.flags & CISTPL_IO_LINES_MASK;
 513                                 i = pcmcia_request_io(link->handle, &link->io);
 514                                 base2 = link->io.BasePort2;
 515                                 if (i == CS_SUCCESS)
 516                                         break;
 517                         }
 518                         i = next_tuple(handle, tuple, parse);
 519                 }
 520         }
 521
 522         if (i != CS_SUCCESS) {
 523                 cs_error(link->handle, RequestIO, i);
 524                 rc = -1;
 525                 goto free_cfg_mem;
 526         }
 527
 528         i = pcmcia_request_irq(link->handle, &link->irq);
 529         if (i != CS_SUCCESS) {
 530                 printk(KERN_NOTICE
 531                        "serial_cs: no usable port range found, giving up\n");
 532                 cs_error(link->handle, RequestIRQ, i);
 533                 link->irq.AssignedIRQ = 0;
 534         }
 535         /* Socket Dual IO: this enables irq's for second port */
 536         if (info->multi && (info->manfid == MANFID_SOCKET)) {
 537                 link->conf.Present |= PRESENT_EXT_STATUS;
 538                 link->conf.ExtStatus = ESR_REQ_ATTN_ENA;
 539         }
 540         i = pcmcia_request_configuration(link->handle, &link->conf);
 541         if (i != CS_SUCCESS) {
 542                 cs_error(link->handle, RequestConfiguration, i);
 543                 rc = -1;
 544                 goto free_cfg_mem;
 545         }
 546
 547         /* The Oxford Semiconductor OXCF950 cards are in fact single-port:
 548            8 registers are for the UART, the others are extra registers */
 549         if (info->manfid == MANFID_OXSEMI) {
 550                 if (cf->index == 1 || cf->index == 3) {
 551                         setup_serial(handle, info, base2, link->irq.AssignedIRQ);
 552                         outb(12, link->io.BasePort1 + 1);
 553                 } else {
 554                         setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ);
 555                         outb(12, base2 + 1);
 556                 }
 557                 rc = 0;
 558                 goto free_cfg_mem;
 559         }
 560
 561         setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ);
 562         /* The Nokia cards are not really multiport cards */
 563         if (info->manfid == MANFID_NOKIA) {
 564                 rc = 0;
 565                 goto free_cfg_mem;
 566         }
 567         for (i = 0; i < info->multi - 1; i++)
 568                 setup_serial(handle, info, base2 + (8 * i),
 569                                 link->irq.AssignedIRQ);
 570         rc = 0;
 571 free_cfg_mem:
 572         kfree(cfg_mem);
 573         return rc;
 574 }
 575
 576 /*======================================================================
 577
 578     serial_config() is scheduled to run after a CARD_INSERTION event
 579     is received, to configure the PCMCIA socket, and to make the
 580     serial device available to the system.
 581
 582 ======================================================================*/
 583
 584 void serial_config(dev_link_t * link)
 585 {
 586         client_handle_t handle = link->handle;
 587         struct serial_info *info = link->priv;
 588         struct serial_cfg_mem *cfg_mem;
 589         tuple_t *tuple;
 590         u_char *buf;
 591         cisparse_t *parse;
 592         cistpl_cftable_entry_t *cf;
 593         int i, last_ret, last_fn;
 594
 595         DEBUG(0, "serial_config(0x%p)\n", link);
 596
 597         cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
 598         if (!cfg_mem)
 599                 goto failed;
 600
 601         tuple = &cfg_mem->tuple;
 602         parse = &cfg_mem->parse;
 603         cf = &parse->cftable_entry;
 604         buf = cfg_mem->buf;
 605
 606         tuple->TupleData = (cisdata_t *) buf;
 607         tuple->TupleOffset = 0;
 608         tuple->TupleDataMax = 255;
 609         tuple->Attributes = 0;
 610         /* Get configuration register information */
 611         tuple->DesiredTuple = CISTPL_CONFIG;
 612         last_ret = first_tuple(handle, tuple, parse);
 613         if (last_ret != CS_SUCCESS) {
 614                 last_fn = ParseTuple;
 615                 goto cs_failed;
 616         }
 617         link->conf.ConfigBase = parse->config.base;
 618         link->conf.Present = parse->config.rmask[0];
 619
 620         /* Configure card */
 621         link->state |= DEV_CONFIG;
 622
 623         /* Is this a compliant multifunction card? */
 624         tuple->DesiredTuple = CISTPL_LONGLINK_MFC;
 625         tuple->Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK;
 626         info->multi = (first_tuple(handle, tuple, parse) == CS_SUCCESS);
 627
 628         /* Is this a multiport card? */
 629         tuple->DesiredTuple = CISTPL_MANFID;
 630         if (first_tuple(handle, tuple, parse) == CS_SUCCESS) {
 631                 info->manfid = parse->manfid.manf;
 632                 for (i = 0; i < MULTI_COUNT; i++)
 633                         if ((info->manfid == multi_id[i].manfid) &&
 634                             (parse->manfid.card == multi_id[i].prodid))
 635                                 break;
 636                 if (i < MULTI_COUNT)
 637                         info->multi = multi_id[i].multi;
 638         }
 639
 640         /* Another check for dual-serial cards: look for either serial or
 641            multifunction cards that ask for appropriate IO port ranges */
 642         tuple->DesiredTuple = CISTPL_FUNCID;
 643         if ((info->multi == 0) &&
 644             ((first_tuple(handle, tuple, parse) != CS_SUCCESS) ||
 645              (parse->funcid.func == CISTPL_FUNCID_MULTI) ||
 646              (parse->funcid.func == CISTPL_FUNCID_SERIAL))) {
 647                 tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
 648                 if (first_tuple(handle, tuple, parse) == CS_SUCCESS) {
 649                         if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
 650                                 info->multi = cf->io.win[0].len >> 3;
 651                         if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
 652                             (cf->io.win[1].len == 8))
 653                                 info->multi = 2;
 654                 }
 655         }
 656
 657         if (info->multi > 1)
 658                 multi_config(link);
 659         else
 660                 simple_config(link);
 661
 662         if (info->ndev == 0)
 663                 goto failed;
 664
 665         if (info->manfid == MANFID_IBM) {
 666                 conf_reg_t reg = { 0, CS_READ, 0x800, 0 };
 667                 last_ret = pcmcia_access_configuration_register(link->handle, &reg);
 668                 if (last_ret) {
 669                         last_fn = AccessConfigurationRegister;
 670                         goto cs_failed;
 671                 }
 672                 reg.Action = CS_WRITE;
 673                 reg.Value = reg.Value | 1;
 674                 last_ret = pcmcia_access_configuration_register(link->handle, &reg);
 675                 if (last_ret) {
 676                         last_fn = AccessConfigurationRegister;
 677                         goto cs_failed;
 678                 }
 679         }
 680
 681         link->dev = &info->node[0];
 682         link->state &= ~DEV_CONFIG_PENDING;
 683         kfree(cfg_mem);
 684         return;
 685
 686  cs_failed:
 687         cs_error(link->handle, last_fn, last_ret);
 688  failed:
 689         serial_remove(link);
 690         link->state &= ~DEV_CONFIG_PENDING;
 691         kfree(cfg_mem);
 692 }
 693
 694 static struct pcmcia_device_id serial_ids[] = {
 695         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021),
 696         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a),
 697         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a),
 698         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15),
 699         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501),
 700         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a),
 701         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a),
 702         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341),
 703         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab),
 704         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081),
 705         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101),
 706         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab),
 707         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a),
 708         PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a),
 709         PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63),
 710         PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63),
 711         PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef),
 712         PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
 713         PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
 714         PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
 715         PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
 716         PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
 717         PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
 718         PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
 719         PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
 720         PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
 721         PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
 722         PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
 723         PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
 724         PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
 725         PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
 726         PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
 727         PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
 728         PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
 729         PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
 730         PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
 731         PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
 732         PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
 733         PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070),
 734         PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020),
 735         PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f),
 736         PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card       ", 0xb569a6e5, 0x5bd4ff2c),
 737         PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3),
 738         PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15),
 739         PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77),
 740         PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302),
 741         PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301),
 742         PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039),
 743         PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006),
 744         PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a),
 745         PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50),
 746         PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51),
 747         PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52),
 748         PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53),
 749         PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180),
 750         PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e),
 751         PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b),
 752         PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025),
 753         PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045),
 754         PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052),
 755         PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae),
 756         PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef),
 757         PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef),
 758         PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef),
 759         PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0),
 760         PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a),
 761         PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02),
 762         PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa),
 763         PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76),
 764         PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95),
 765         PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed),
 766         PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65),
 767         PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6),
 768         PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb),
 769         PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f),
 770         PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f),
 771         PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383),
 772         PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e),
 773         PCMCIA_DEVICE_PROD_ID12("OEM      ", "C288MX     ", 0xb572d360, 0xd2385b7a),
 774         PCMCIA_DEVICE_PROD_ID12("PCMCIA   ", "C336MX     ", 0x99bcafe9, 0xaa25bcab),
 775         PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f),
 776         PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "PCMLM28.cis"),
 777         PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "PCMLM28.cis"),
 778         PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "PCMLM28.cis"),
 779         PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "PCMLM28.cis"),
 780         PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "PCMLM28.cis"),
 781         PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"),
 782         PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"),
 783         PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "3CCFEM556.cis"),
 784         PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "DP83903.cis"),
 785         PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "3CXEM556.cis"),
 786         PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "3CXEM556.cis"),
 787         PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0x0710, "SW_7xx_SER.cis"),  /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
 788         PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "SW_555_SER.cis"),  /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
 789         PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "SW_555_SER.cis"),  /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
 790         PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "MT5634ZLX.cis"),
 791         PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "COMpad4.cis"),
 792         PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "COMpad2.cis"),
 793         PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "RS-COM-2P.cis"),
 794         /* too generic */
 795         /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */
 796         /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */
 797         PCMCIA_DEVICE_FUNC_ID(2),
 798         PCMCIA_DEVICE_NULL,
 799 };
 800 MODULE_DEVICE_TABLE(pcmcia, serial_ids);
 801
 802 static struct pcmcia_driver serial_cs_driver = {
 803         .owner          = THIS_MODULE,
 804         .drv            = {
 805                 .name   = "serial_cs",
 806         },
 807         .probe          = serial_probe,
 808         .remove         = serial_detach,
 809         .id_table       = serial_ids,
 810         .suspend        = serial_suspend,
 811         .resume         = serial_resume,
 812 };
 813
 814 static int __init init_serial_cs(void)
 815 {
 816         return pcmcia_register_driver(&serial_cs_driver);
 817 }
 818
 819 static void __exit exit_serial_cs(void)
 820 {
 821         pcmcia_unregister_driver(&serial_cs_driver);
 822 }
 823
 824 module_init(init_serial_cs);
 825 module_exit(exit_serial_cs);
 826
 827 MODULE_LICENSE("GPL");