SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/serial/8250_pci.c

   1 /*
   2  *  linux/drivers/char/8250_pci.c
   3  *
   4  *  Probe module for 8250/16550-type PCI serial ports.
   5  *
   6  *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
   7  *
   8  *  Copyright (C) 2001 Russell King, All Rights Reserved.
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2 of the License.
  13  *
  14  *  $Id: 8250_pci.c,v 1.28 2002/11/02 11:14:18 rmk Exp $
  15  */
  16 #include <linux/module.h>
  17 #include <linux/init.h>
  18 #include <linux/pci.h>
  19 #include <linux/sched.h>
  20 #include <linux/string.h>
  21 #include <linux/kernel.h>
  22 #include <linux/slab.h>
  23 #include <linux/delay.h>
  24 #include <linux/tty.h>
  25 #include <linux/serial_core.h>
  26 #include <linux/8250_pci.h>
  27 #include <linux/bitops.h>
  28
  29 #include <asm/byteorder.h>
  30 #include <asm/io.h>
  31
  32 #include "8250.h"
  33
  34 #undef SERIAL_DEBUG_PCI
  35
  36 /*
  37  * init function returns:
  38  *  > 0 - number of ports
  39  *  = 0 - use board->num_ports
  40  *  < 0 - error
  41  */
  42 struct pci_serial_quirk {
  43         u32     vendor;
  44         u32     device;
  45         u32     subvendor;
  46         u32     subdevice;
  47         int     (*init)(struct pci_dev *dev);
  48         int     (*setup)(struct serial_private *, struct pciserial_board *,
  49                          struct uart_port *, int);
  50         void    (*exit)(struct pci_dev *dev);
  51 };
  52
  53 #define PCI_NUM_BAR_RESOURCES   6
  54
  55 struct serial_private {
  56         struct pci_dev          *dev;
  57         unsigned int            nr;
  58         void __iomem            *remapped_bar[PCI_NUM_BAR_RESOURCES];
  59         struct pci_serial_quirk *quirk;
  60         int                     line[0];
  61 };
  62
  63 static void moan_device(const char *str, struct pci_dev *dev)
  64 {
  65         printk(KERN_WARNING "%s: %s\n"
  66                KERN_WARNING "Please send the output of lspci -vv, this\n"
  67                KERN_WARNING "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
  68                KERN_WARNING "manufacturer and name of serial board or\n"
  69                KERN_WARNING "modem board to rmk+serial@arm.linux.org.uk.\n",
  70                pci_name(dev), str, dev->vendor, dev->device,
  71                dev->subsystem_vendor, dev->subsystem_device);
  72 }
  73
  74 static int
  75 setup_port(struct serial_private *priv, struct uart_port *port,
  76            int bar, int offset, int regshift)
  77 {
  78         struct pci_dev *dev = priv->dev;
  79         unsigned long base, len;
  80
  81         if (bar >= PCI_NUM_BAR_RESOURCES)
  82                 return -EINVAL;
  83
  84         base = pci_resource_start(dev, bar);
  85
  86         if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) {
  87                 len =  pci_resource_len(dev, bar);
  88
  89                 if (!priv->remapped_bar[bar])
  90                         priv->remapped_bar[bar] = ioremap(base, len);
  91                 if (!priv->remapped_bar[bar])
  92                         return -ENOMEM;
  93
  94                 port->iotype = UPIO_MEM;
  95                 port->iobase = 0;
  96                 port->mapbase = base + offset;
  97                 port->membase = priv->remapped_bar[bar] + offset;
  98                 port->regshift = regshift;
  99         } else {
 100                 port->iotype = UPIO_PORT;
 101                 port->iobase = base + offset;
 102                 port->mapbase = 0;
 103                 port->membase = NULL;
 104                 port->regshift = 0;
 105         }
 106         return 0;
 107 }
 108
 109 /*
 110  * AFAVLAB uses a different mixture of BARs and offsets
 111  * Not that ugly ;) -- HW
 112  */
 113 static int
 114 afavlab_setup(struct serial_private *priv, struct pciserial_board *board,
 115               struct uart_port *port, int idx)
 116 {
 117         unsigned int bar, offset = board->first_offset;
 118
 119         bar = FL_GET_BASE(board->flags);
 120         if (idx < 4)
 121                 bar += idx;
 122         else {
 123                 bar = 4;
 124                 offset += (idx - 4) * board->uart_offset;
 125         }
 126
 127         return setup_port(priv, port, bar, offset, board->reg_shift);
 128 }
 129
 130 /*
 131  * HP's Remote Management Console.  The Diva chip came in several
 132  * different versions.  N-class, L2000 and A500 have two Diva chips, each
 133  * with 3 UARTs (the third UART on the second chip is unused).  Superdome
 134  * and Keystone have one Diva chip with 3 UARTs.  Some later machines have
 135  * one Diva chip, but it has been expanded to 5 UARTs.
 136  */
 137 static int __devinit pci_hp_diva_init(struct pci_dev *dev)
 138 {
 139         int rc = 0;
 140
 141         switch (dev->subsystem_device) {
 142         case PCI_DEVICE_ID_HP_DIVA_TOSCA1:
 143         case PCI_DEVICE_ID_HP_DIVA_HALFDOME:
 144         case PCI_DEVICE_ID_HP_DIVA_KEYSTONE:
 145         case PCI_DEVICE_ID_HP_DIVA_EVEREST:
 146                 rc = 3;
 147                 break;
 148         case PCI_DEVICE_ID_HP_DIVA_TOSCA2:
 149                 rc = 2;
 150                 break;
 151         case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
 152                 rc = 4;
 153                 break;
 154         case PCI_DEVICE_ID_HP_DIVA_POWERBAR:
 155         case PCI_DEVICE_ID_HP_DIVA_HURRICANE:
 156                 rc = 1;
 157                 break;
 158         }
 159
 160         return rc;
 161 }
 162
 163 /*
 164  * HP's Diva chip puts the 4th/5th serial port further out, and
 165  * some serial ports are supposed to be hidden on certain models.
 166  */
 167 static int
 168 pci_hp_diva_setup(struct serial_private *priv, struct pciserial_board *board,
 169               struct uart_port *port, int idx)
 170 {
 171         unsigned int offset = board->first_offset;
 172         unsigned int bar = FL_GET_BASE(board->flags);
 173
 174         switch (priv->dev->subsystem_device) {
 175         case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
 176                 if (idx == 3)
 177                         idx++;
 178                 break;
 179         case PCI_DEVICE_ID_HP_DIVA_EVEREST:
 180                 if (idx > 0)
 181                         idx++;
 182                 if (idx > 2)
 183                         idx++;
 184                 break;
 185         }
 186         if (idx > 2)
 187                 offset = 0x18;
 188
 189         offset += idx * board->uart_offset;
 190
 191         return setup_port(priv, port, bar, offset, board->reg_shift);
 192 }
 193
 194 /*
 195  * Added for EKF Intel i960 serial boards
 196  */
 197 static int __devinit pci_inteli960ni_init(struct pci_dev *dev)
 198 {
 199         unsigned long oldval;
 200
 201         if (!(dev->subsystem_device & 0x1000))
 202                 return -ENODEV;
 203
 204         /* is firmware started? */
 205         pci_read_config_dword(dev, 0x44, (void*) &oldval);
 206         if (oldval == 0x00001000L) { /* RESET value */
 207                 printk(KERN_DEBUG "Local i960 firmware missing");
 208                 return -ENODEV;
 209         }
 210         return 0;
 211 }
 212
 213 /*
 214  * Some PCI serial cards using the PLX 9050 PCI interface chip require
 215  * that the card interrupt be explicitly enabled or disabled.  This
 216  * seems to be mainly needed on card using the PLX which also use I/O
 217  * mapped memory.
 218  */
 219 static int __devinit pci_plx9050_init(struct pci_dev *dev)
 220 {
 221         u8 irq_config;
 222         void __iomem *p;
 223
 224         if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) {
 225                 moan_device("no memory in bar 0", dev);
 226                 return 0;
 227         }
 228
 229         irq_config = 0x41;
 230         if (dev->vendor == PCI_VENDOR_ID_PANACOM ||
 231             dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS) {
 232                 irq_config = 0x43;
 233         }
 234         if ((dev->vendor == PCI_VENDOR_ID_PLX) &&
 235             (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) {
 236                 /*
 237                  * As the megawolf cards have the int pins active
 238                  * high, and have 2 UART chips, both ints must be
 239                  * enabled on the 9050. Also, the UARTS are set in
 240                  * 16450 mode by default, so we have to enable the
 241                  * 16C950 'enhanced' mode so that we can use the
 242                  * deep FIFOs
 243                  */
 244                 irq_config = 0x5b;
 245         }
 246
 247         /*
 248          * enable/disable interrupts
 249          */
 250         p = ioremap(pci_resource_start(dev, 0), 0x80);
 251         if (p == NULL)
 252                 return -ENOMEM;
 253         writel(irq_config, p + 0x4c);
 254
 255         /*
 256          * Read the register back to ensure that it took effect.
 257          */
 258         readl(p + 0x4c);
 259         iounmap(p);
 260
 261         return 0;
 262 }
 263
 264 static void __devexit pci_plx9050_exit(struct pci_dev *dev)
 265 {
 266         u8 __iomem *p;
 267
 268         if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0)
 269                 return;
 270
 271         /*
 272          * disable interrupts
 273          */
 274         p = ioremap(pci_resource_start(dev, 0), 0x80);
 275         if (p != NULL) {
 276                 writel(0, p + 0x4c);
 277
 278                 /*
 279                  * Read the register back to ensure that it took effect.
 280                  */
 281                 readl(p + 0x4c);
 282                 iounmap(p);
 283         }
 284 }
 285
 286 /* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */
 287 static int
 288 sbs_setup(struct serial_private *priv, struct pciserial_board *board,
 289                 struct uart_port *port, int idx)
 290 {
 291         unsigned int bar, offset = board->first_offset;
 292
 293         bar = 0;
 294
 295         if (idx < 4) {
 296                 /* first four channels map to 0, 0x100, 0x200, 0x300 */
 297                 offset += idx * board->uart_offset;
 298         } else if (idx < 8) {
 299                 /* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */
 300                 offset += idx * board->uart_offset + 0xC00;
 301         } else /* we have only 8 ports on PMC-OCTALPRO */
 302                 return 1;
 303
 304         return setup_port(priv, port, bar, offset, board->reg_shift);
 305 }
 306
 307 /*
 308 * This does initialization for PMC OCTALPRO cards:
 309 * maps the device memory, resets the UARTs (needed, bc
 310 * if the module is removed and inserted again, the card
 311 * is in the sleep mode) and enables global interrupt.
 312 */
 313
 314 /* global control register offset for SBS PMC-OctalPro */
 315 #define OCT_REG_CR_OFF          0x500
 316
 317 static int __devinit sbs_init(struct pci_dev *dev)
 318 {
 319         u8 __iomem *p;
 320
 321         p = ioremap(pci_resource_start(dev, 0),pci_resource_len(dev,0));
 322
 323         if (p == NULL)
 324                 return -ENOMEM;
 325         /* Set bit-4 Control Register (UART RESET) in to reset the uarts */
 326         writeb(0x10,p + OCT_REG_CR_OFF);
 327         udelay(50);
 328         writeb(0x0,p + OCT_REG_CR_OFF);
 329
 330         /* Set bit-2 (INTENABLE) of Control Register */
 331         writeb(0x4, p + OCT_REG_CR_OFF);
 332         iounmap(p);
 333
 334         return 0;
 335 }
 336
 337 /*
 338  * Disables the global interrupt of PMC-OctalPro
 339  */
 340
 341 static void __devexit sbs_exit(struct pci_dev *dev)
 342 {
 343         u8 __iomem *p;
 344
 345         p = ioremap(pci_resource_start(dev, 0),pci_resource_len(dev,0));
 346         if (p != NULL) {
 347                 writeb(0, p + OCT_REG_CR_OFF);
 348         }
 349         iounmap(p);
 350 }
 351
 352 /*
 353  * SIIG serial cards have an PCI interface chip which also controls
 354  * the UART clocking frequency. Each UART can be clocked independently
 355  * (except cards equiped with 4 UARTs) and initial clocking settings
 356  * are stored in the EEPROM chip. It can cause problems because this
 357  * version of serial driver doesn't support differently clocked UART's
 358  * on single PCI card. To prevent this, initialization functions set
 359  * high frequency clocking for all UART's on given card. It is safe (I
 360  * hope) because it doesn't touch EEPROM settings to prevent conflicts
 361  * with other OSes (like M$ DOS).
 362  *
 363  *  SIIG support added by Andrey Panin <pazke@donpac.ru>, 10/1999
 364  *
 365  * There is two family of SIIG serial cards with different PCI
 366  * interface chip and different configuration methods:
 367  *     - 10x cards have control registers in IO and/or memory space;
 368  *     - 20x cards have control registers in standard PCI configuration space.
 369  *
 370  * Note: all 10x cards have PCI device ids 0x10..
 371  *       all 20x cards have PCI device ids 0x20..
 372  *
 373  * There are also Quartet Serial cards which use Oxford Semiconductor
 374  * 16954 quad UART PCI chip clocked by 18.432 MHz quartz.
 375  *
 376  * Note: some SIIG cards are probed by the parport_serial object.
 377  */
 378
 379 #define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc)
 380 #define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8)
 381
 382 static int pci_siig10x_init(struct pci_dev *dev)
 383 {
 384         u16 data;
 385         void __iomem *p;
 386
 387         switch (dev->device & 0xfff8) {
 388         case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */
 389                 data = 0xffdf;
 390                 break;
 391         case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */
 392                 data = 0xf7ff;
 393                 break;
 394         default:                        /* 1S1P, 4S */
 395                 data = 0xfffb;
 396                 break;
 397         }
 398
 399         p = ioremap(pci_resource_start(dev, 0), 0x80);
 400         if (p == NULL)
 401                 return -ENOMEM;
 402
 403         writew(readw(p + 0x28) & data, p + 0x28);
 404         readw(p + 0x28);
 405         iounmap(p);
 406         return 0;
 407 }
 408
 409 #define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc)
 410 #define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc)
 411
 412 static int pci_siig20x_init(struct pci_dev *dev)
 413 {
 414         u8 data;
 415
 416         /* Change clock frequency for the first UART. */
 417         pci_read_config_byte(dev, 0x6f, &data);
 418         pci_write_config_byte(dev, 0x6f, data & 0xef);
 419
 420         /* If this card has 2 UART, we have to do the same with second UART. */
 421         if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) ||
 422             ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) {
 423                 pci_read_config_byte(dev, 0x73, &data);
 424                 pci_write_config_byte(dev, 0x73, data & 0xef);
 425         }
 426         return 0;
 427 }
 428
 429 static int pci_siig_init(struct pci_dev *dev)
 430 {
 431         unsigned int type = dev->device & 0xff00;
 432
 433         if (type == 0x1000)
 434                 return pci_siig10x_init(dev);
 435         else if (type == 0x2000)
 436                 return pci_siig20x_init(dev);
 437
 438         moan_device("Unknown SIIG card", dev);
 439         return -ENODEV;
 440 }
 441
 442 /*
 443  * Timedia has an explosion of boards, and to avoid the PCI table from
 444  * growing *huge*, we use this function to collapse some 70 entries
 445  * in the PCI table into one, for sanity's and compactness's sake.
 446  */
 447 static unsigned short timedia_single_port[] = {
 448         0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0
 449 };
 450
 451 static unsigned short timedia_dual_port[] = {
 452         0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085,
 453         0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079,
 454         0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079,
 455         0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079,
 456         0xD079, 0
 457 };
 458
 459 static unsigned short timedia_quad_port[] = {
 460         0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157,
 461         0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159,
 462         0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056,
 463         0xB157, 0
 464 };
 465
 466 static unsigned short timedia_eight_port[] = {
 467         0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166,
 468         0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0
 469 };
 470
 471 static struct timedia_struct {
 472         int num;
 473         unsigned short *ids;
 474 } timedia_data[] = {
 475         { 1, timedia_single_port },
 476         { 2, timedia_dual_port },
 477         { 4, timedia_quad_port },
 478         { 8, timedia_eight_port },
 479         { 0, NULL }
 480 };
 481
 482 static int __devinit pci_timedia_init(struct pci_dev *dev)
 483 {
 484         unsigned short *ids;
 485         int i, j;
 486
 487         for (i = 0; timedia_data[i].num; i++) {
 488                 ids = timedia_data[i].ids;
 489                 for (j = 0; ids[j]; j++)
 490                         if (dev->subsystem_device == ids[j])
 491                                 return timedia_data[i].num;
 492         }
 493         return 0;
 494 }
 495
 496 /*
 497  * Timedia/SUNIX uses a mixture of BARs and offsets
 498  * Ugh, this is ugly as all hell --- TYT
 499  */
 500 static int
 501 pci_timedia_setup(struct serial_private *priv, struct pciserial_board *board,
 502                   struct uart_port *port, int idx)
 503 {
 504         unsigned int bar = 0, offset = board->first_offset;
 505
 506         switch (idx) {
 507         case 0:
 508                 bar = 0;
 509                 break;
 510         case 1:
 511                 offset = board->uart_offset;
 512                 bar = 0;
 513                 break;
 514         case 2:
 515                 bar = 1;
 516                 break;
 517         case 3:
 518                 offset = board->uart_offset;
 519                 bar = 1;
 520         case 4: /* BAR 2 */
 521         case 5: /* BAR 3 */
 522         case 6: /* BAR 4 */
 523         case 7: /* BAR 5 */
 524                 bar = idx - 2;
 525         }
 526
 527         return setup_port(priv, port, bar, offset, board->reg_shift);
 528 }
 529
 530 /*
 531  * Some Titan cards are also a little weird
 532  */
 533 static int
 534 titan_400l_800l_setup(struct serial_private *priv,
 535                       struct pciserial_board *board,
 536                       struct uart_port *port, int idx)
 537 {
 538         unsigned int bar, offset = board->first_offset;
 539
 540         switch (idx) {
 541         case 0:
 542                 bar = 1;
 543                 break;
 544         case 1:
 545                 bar = 2;
 546                 break;
 547         default:
 548                 bar = 4;
 549                 offset = (idx - 2) * board->uart_offset;
 550         }
 551
 552         return setup_port(priv, port, bar, offset, board->reg_shift);
 553 }
 554
 555 static int __devinit pci_xircom_init(struct pci_dev *dev)
 556 {
 557         msleep(100);
 558         return 0;
 559 }
 560
 561 static int __devinit pci_netmos_init(struct pci_dev *dev)
 562 {
 563         /* subdevice 0x00PS means <P> parallel, <S> serial */
 564         unsigned int num_serial = dev->subsystem_device & 0xf;
 565
 566         if (num_serial == 0)
 567                 return -ENODEV;
 568         return num_serial;
 569 }
 570
 571 static int
 572 pci_default_setup(struct serial_private *priv, struct pciserial_board *board,
 573                   struct uart_port *port, int idx)
 574 {
 575         unsigned int bar, offset = board->first_offset, maxnr;
 576
 577         bar = FL_GET_BASE(board->flags);
 578         if (board->flags & FL_BASE_BARS)
 579                 bar += idx;
 580         else
 581                 offset += idx * board->uart_offset;
 582
 583         maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) /
 584                 (8 << board->reg_shift);
 585
 586         if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
 587                 return 1;
 588
 589         return setup_port(priv, port, bar, offset, board->reg_shift);
 590 }
 591
 592 /* This should be in linux/pci_ids.h */
 593 #define PCI_VENDOR_ID_SBSMODULARIO      0x124B
 594 #define PCI_SUBVENDOR_ID_SBSMODULARIO   0x124B
 595 #define PCI_DEVICE_ID_OCTPRO            0x0001
 596 #define PCI_SUBDEVICE_ID_OCTPRO232      0x0108
 597 #define PCI_SUBDEVICE_ID_OCTPRO422      0x0208
 598 #define PCI_SUBDEVICE_ID_POCTAL232      0x0308
 599 #define PCI_SUBDEVICE_ID_POCTAL422      0x0408
 600
 601 /*
 602  * Master list of serial port init/setup/exit quirks.
 603  * This does not describe the general nature of the port.
 604  * (ie, baud base, number and location of ports, etc)
 605  *
 606  * This list is ordered alphabetically by vendor then device.
 607  * Specific entries must come before more generic entries.
 608  */
 609 static struct pci_serial_quirk pci_serial_quirks[] = {
 610         /*
 611          * AFAVLAB cards.
 612          *  It is not clear whether this applies to all products.
 613          */
 614         {
 615                 .vendor         = PCI_VENDOR_ID_AFAVLAB,
 616                 .device         = PCI_ANY_ID,
 617                 .subvendor      = PCI_ANY_ID,
 618                 .subdevice      = PCI_ANY_ID,
 619                 .setup          = afavlab_setup,
 620         },
 621         /*
 622          * HP Diva
 623          */
 624         {
 625                 .vendor         = PCI_VENDOR_ID_HP,
 626                 .device         = PCI_DEVICE_ID_HP_DIVA,
 627                 .subvendor      = PCI_ANY_ID,
 628                 .subdevice      = PCI_ANY_ID,
 629                 .init           = pci_hp_diva_init,
 630                 .setup          = pci_hp_diva_setup,
 631         },
 632         /*
 633          * Intel
 634          */
 635         {
 636                 .vendor         = PCI_VENDOR_ID_INTEL,
 637                 .device         = PCI_DEVICE_ID_INTEL_80960_RP,
 638                 .subvendor      = 0xe4bf,
 639                 .subdevice      = PCI_ANY_ID,
 640                 .init           = pci_inteli960ni_init,
 641                 .setup          = pci_default_setup,
 642         },
 643         /*
 644          * Panacom
 645          */
 646         {
 647                 .vendor         = PCI_VENDOR_ID_PANACOM,
 648                 .device         = PCI_DEVICE_ID_PANACOM_QUADMODEM,
 649                 .subvendor      = PCI_ANY_ID,
 650                 .subdevice      = PCI_ANY_ID,
 651                 .init           = pci_plx9050_init,
 652                 .setup          = pci_default_setup,
 653                 .exit           = __devexit_p(pci_plx9050_exit),
 654         },
 655         {
 656                 .vendor         = PCI_VENDOR_ID_PANACOM,
 657                 .device         = PCI_DEVICE_ID_PANACOM_DUALMODEM,
 658                 .subvendor      = PCI_ANY_ID,
 659                 .subdevice      = PCI_ANY_ID,
 660                 .init           = pci_plx9050_init,
 661                 .setup          = pci_default_setup,
 662                 .exit           = __devexit_p(pci_plx9050_exit),
 663         },
 664         /*
 665          * PLX
 666          */
 667         {
 668                 .vendor         = PCI_VENDOR_ID_PLX,
 669                 .device         = PCI_DEVICE_ID_PLX_9050,
 670                 .subvendor      = PCI_SUBVENDOR_ID_EXSYS,
 671                 .subdevice      = PCI_SUBDEVICE_ID_EXSYS_4055,
 672                 .init           = pci_plx9050_init,
 673                 .setup          = pci_default_setup,
 674                 .exit           = __devexit_p(pci_plx9050_exit),
 675         },
 676         {
 677                 .vendor         = PCI_VENDOR_ID_PLX,
 678                 .device         = PCI_DEVICE_ID_PLX_9050,
 679                 .subvendor      = PCI_SUBVENDOR_ID_KEYSPAN,
 680                 .subdevice      = PCI_SUBDEVICE_ID_KEYSPAN_SX2,
 681                 .init           = pci_plx9050_init,
 682                 .setup          = pci_default_setup,
 683                 .exit           = __devexit_p(pci_plx9050_exit),
 684         },
 685         {
 686                 .vendor         = PCI_VENDOR_ID_PLX,
 687                 .device         = PCI_DEVICE_ID_PLX_ROMULUS,
 688                 .subvendor      = PCI_VENDOR_ID_PLX,
 689                 .subdevice      = PCI_DEVICE_ID_PLX_ROMULUS,
 690                 .init           = pci_plx9050_init,
 691                 .setup          = pci_default_setup,
 692                 .exit           = __devexit_p(pci_plx9050_exit),
 693         },
 694         /*
 695          * SBS Technologies, Inc., PMC-OCTALPRO 232
 696          */
 697         {
 698                 .vendor         = PCI_VENDOR_ID_SBSMODULARIO,
 699                 .device         = PCI_DEVICE_ID_OCTPRO,
 700                 .subvendor      = PCI_SUBVENDOR_ID_SBSMODULARIO,
 701                 .subdevice      = PCI_SUBDEVICE_ID_OCTPRO232,
 702                 .init           = sbs_init,
 703                 .setup          = sbs_setup,
 704                 .exit           = __devexit_p(sbs_exit),
 705         },
 706         /*
 707          * SBS Technologies, Inc., PMC-OCTALPRO 422
 708          */
 709         {
 710                 .vendor         = PCI_VENDOR_ID_SBSMODULARIO,
 711                 .device         = PCI_DEVICE_ID_OCTPRO,
 712                 .subvendor      = PCI_SUBVENDOR_ID_SBSMODULARIO,
 713                 .subdevice      = PCI_SUBDEVICE_ID_OCTPRO422,
 714                 .init           = sbs_init,
 715                 .setup          = sbs_setup,
 716                 .exit           = __devexit_p(sbs_exit),
 717         },
 718         /*
 719          * SBS Technologies, Inc., P-Octal 232
 720          */
 721         {
 722                 .vendor         = PCI_VENDOR_ID_SBSMODULARIO,
 723                 .device         = PCI_DEVICE_ID_OCTPRO,
 724                 .subvendor      = PCI_SUBVENDOR_ID_SBSMODULARIO,
 725                 .subdevice      = PCI_SUBDEVICE_ID_POCTAL232,
 726                 .init           = sbs_init,
 727                 .setup          = sbs_setup,
 728                 .exit           = __devexit_p(sbs_exit),
 729         },
 730         /*
 731          * SBS Technologies, Inc., P-Octal 422
 732          */
 733         {
 734                 .vendor         = PCI_VENDOR_ID_SBSMODULARIO,
 735                 .device         = PCI_DEVICE_ID_OCTPRO,
 736                 .subvendor      = PCI_SUBVENDOR_ID_SBSMODULARIO,
 737                 .subdevice      = PCI_SUBDEVICE_ID_POCTAL422,
 738                 .init           = sbs_init,
 739                 .setup          = sbs_setup,
 740                 .exit           = __devexit_p(sbs_exit),
 741         },
 742         /*
 743          * SIIG cards.
 744          */
 745         {
 746                 .vendor         = PCI_VENDOR_ID_SIIG,
 747                 .device         = PCI_ANY_ID,
 748                 .subvendor      = PCI_ANY_ID,
 749                 .subdevice      = PCI_ANY_ID,
 750                 .init           = pci_siig_init,
 751                 .setup          = pci_default_setup,
 752         },
 753         /*
 754          * Titan cards
 755          */
 756         {
 757                 .vendor         = PCI_VENDOR_ID_TITAN,
 758                 .device         = PCI_DEVICE_ID_TITAN_400L,
 759                 .subvendor      = PCI_ANY_ID,
 760                 .subdevice      = PCI_ANY_ID,
 761                 .setup          = titan_400l_800l_setup,
 762         },
 763         {
 764                 .vendor         = PCI_VENDOR_ID_TITAN,
 765                 .device         = PCI_DEVICE_ID_TITAN_800L,
 766                 .subvendor      = PCI_ANY_ID,
 767                 .subdevice      = PCI_ANY_ID,
 768                 .setup          = titan_400l_800l_setup,
 769         },
 770         /*
 771          * Timedia cards
 772          */
 773         {
 774                 .vendor         = PCI_VENDOR_ID_TIMEDIA,
 775                 .device         = PCI_DEVICE_ID_TIMEDIA_1889,
 776                 .subvendor      = PCI_VENDOR_ID_TIMEDIA,
 777                 .subdevice      = PCI_ANY_ID,
 778                 .init           = pci_timedia_init,
 779                 .setup          = pci_timedia_setup,
 780         },
 781         {
 782                 .vendor         = PCI_VENDOR_ID_TIMEDIA,
 783                 .device         = PCI_ANY_ID,
 784                 .subvendor      = PCI_ANY_ID,
 785                 .subdevice      = PCI_ANY_ID,
 786                 .setup          = pci_timedia_setup,
 787         },
 788         /*
 789          * Xircom cards
 790          */
 791         {
 792                 .vendor         = PCI_VENDOR_ID_XIRCOM,
 793                 .device         = PCI_DEVICE_ID_XIRCOM_X3201_MDM,
 794                 .subvendor      = PCI_ANY_ID,
 795                 .subdevice      = PCI_ANY_ID,
 796                 .init           = pci_xircom_init,
 797                 .setup          = pci_default_setup,
 798         },
 799         /*
 800          * Netmos cards
 801          */
 802         {
 803                 .vendor         = PCI_VENDOR_ID_NETMOS,
 804                 .device         = PCI_ANY_ID,
 805                 .subvendor      = PCI_ANY_ID,
 806                 .subdevice      = PCI_ANY_ID,
 807                 .init           = pci_netmos_init,
 808                 .setup          = pci_default_setup,
 809         },
 810         /*
 811          * Default "match everything" terminator entry
 812          */
 813         {
 814                 .vendor         = PCI_ANY_ID,
 815                 .device         = PCI_ANY_ID,
 816                 .subvendor      = PCI_ANY_ID,
 817                 .subdevice      = PCI_ANY_ID,
 818                 .setup          = pci_default_setup,
 819         }
 820 };
 821
 822 static inline int quirk_id_matches(u32 quirk_id, u32 dev_id)
 823 {
 824         return quirk_id == PCI_ANY_ID || quirk_id == dev_id;
 825 }
 826
 827 static struct pci_serial_quirk *find_quirk(struct pci_dev *dev)
 828 {
 829         struct pci_serial_quirk *quirk;
 830
 831         for (quirk = pci_serial_quirks; ; quirk++)
 832                 if (quirk_id_matches(quirk->vendor, dev->vendor) &&
 833                     quirk_id_matches(quirk->device, dev->device) &&
 834                     quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) &&
 835                     quirk_id_matches(quirk->subdevice, dev->subsystem_device))
 836                         break;
 837         return quirk;
 838 }
 839
 840 static _INLINE_ int
 841 get_pci_irq(struct pci_dev *dev, struct pciserial_board *board)
 842 {
 843         if (board->flags & FL_NOIRQ)
 844                 return 0;
 845         else
 846                 return dev->irq;
 847 }
 848
 849 /*
 850  * This is the configuration table for all of the PCI serial boards
 851  * which we support.  It is directly indexed by the pci_board_num_t enum
 852  * value, which is encoded in the pci_device_id PCI probe table's
 853  * driver_data member.
 854  *
 855  * The makeup of these names are:
 856  *  pbn_bn{_bt}_n_baud
 857  *
 858  *  bn   = PCI BAR number
 859  *  bt   = Index using PCI BARs
 860  *  n    = number of serial ports
 861  *  baud = baud rate
 862  *
 863  * This table is sorted by (in order): baud, bt, bn, n.
 864  *
 865  * Please note: in theory if n = 1, _bt infix should make no difference.
 866  * ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200
 867  */
 868 enum pci_board_num_t {
 869         pbn_default = 0,
 870
 871         pbn_b0_1_115200,
 872         pbn_b0_2_115200,
 873         pbn_b0_4_115200,
 874         pbn_b0_5_115200,
 875
 876         pbn_b0_1_921600,
 877         pbn_b0_2_921600,
 878         pbn_b0_4_921600,
 879
 880         pbn_b0_2_1130000,
 881
 882         pbn_b0_4_1152000,
 883
 884         pbn_b0_bt_1_115200,
 885         pbn_b0_bt_2_115200,
 886         pbn_b0_bt_8_115200,
 887
 888         pbn_b0_bt_1_460800,
 889         pbn_b0_bt_2_460800,
 890         pbn_b0_bt_4_460800,
 891
 892         pbn_b0_bt_1_921600,
 893         pbn_b0_bt_2_921600,
 894         pbn_b0_bt_4_921600,
 895         pbn_b0_bt_8_921600,
 896
 897         pbn_b1_1_115200,
 898         pbn_b1_2_115200,
 899         pbn_b1_4_115200,
 900         pbn_b1_8_115200,
 901
 902         pbn_b1_1_921600,
 903         pbn_b1_2_921600,
 904         pbn_b1_4_921600,
 905         pbn_b1_8_921600,
 906
 907         pbn_b1_bt_2_921600,
 908
 909         pbn_b1_1_1382400,
 910         pbn_b1_2_1382400,
 911         pbn_b1_4_1382400,
 912         pbn_b1_8_1382400,
 913
 914         pbn_b2_1_115200,
 915         pbn_b2_8_115200,
 916
 917         pbn_b2_1_460800,
 918         pbn_b2_4_460800,
 919         pbn_b2_8_460800,
 920         pbn_b2_16_460800,
 921
 922         pbn_b2_1_921600,
 923         pbn_b2_4_921600,
 924         pbn_b2_8_921600,
 925
 926         pbn_b2_bt_1_115200,
 927         pbn_b2_bt_2_115200,
 928         pbn_b2_bt_4_115200,
 929
 930         pbn_b2_bt_2_921600,
 931         pbn_b2_bt_4_921600,
 932
 933         pbn_b3_4_115200,
 934         pbn_b3_8_115200,
 935
 936         /*
 937          * Board-specific versions.
 938          */
 939         pbn_panacom,
 940         pbn_panacom2,
 941         pbn_panacom4,
 942         pbn_exsys_4055,
 943         pbn_plx_romulus,
 944         pbn_oxsemi,
 945         pbn_intel_i960,
 946         pbn_sgi_ioc3,
 947         pbn_nec_nile4,
 948         pbn_computone_4,
 949         pbn_computone_6,
 950         pbn_computone_8,
 951         pbn_sbsxrsio,
 952         pbn_exar_XR17C152,
 953         pbn_exar_XR17C154,
 954         pbn_exar_XR17C158,
 955 };
 956
 957 /*
 958  * uart_offset - the space between channels
 959  * reg_shift   - describes how the UART registers are mapped
 960  *               to PCI memory by the card.
 961  * For example IER register on SBS, Inc. PMC-OctPro is located at
 962  * offset 0x10 from the UART base, while UART_IER is defined as 1
 963  * in include/linux/serial_reg.h,
 964  * see first lines of serial_in() and serial_out() in 8250.c
 965 */
 966
 967 static struct pciserial_board pci_boards[] __devinitdata = {
 968         [pbn_default] = {
 969                 .flags          = FL_BASE0,
 970                 .num_ports      = 1,
 971                 .base_baud      = 115200,
 972                 .uart_offset    = 8,
 973         },
 974         [pbn_b0_1_115200] = {
 975                 .flags          = FL_BASE0,
 976                 .num_ports      = 1,
 977                 .base_baud      = 115200,
 978                 .uart_offset    = 8,
 979         },
 980         [pbn_b0_2_115200] = {
 981                 .flags          = FL_BASE0,
 982                 .num_ports      = 2,
 983                 .base_baud      = 115200,
 984                 .uart_offset    = 8,
 985         },
 986         [pbn_b0_4_115200] = {
 987                 .flags          = FL_BASE0,
 988                 .num_ports      = 4,
 989                 .base_baud      = 115200,
 990                 .uart_offset    = 8,
 991         },
 992         [pbn_b0_5_115200] = {
 993                 .flags          = FL_BASE0,
 994                 .num_ports      = 5,
 995                 .base_baud      = 115200,
 996                 .uart_offset    = 8,
 997         },
 998
 999         [pbn_b0_1_921600] = {
1000                 .flags          = FL_BASE0,
1001                 .num_ports      = 1,
1002                 .base_baud      = 921600,
1003                 .uart_offset    = 8,
1004         },
1005         [pbn_b0_2_921600] = {
1006                 .flags          = FL_BASE0,
1007                 .num_ports      = 2,
1008                 .base_baud      = 921600,
1009                 .uart_offset    = 8,
1010         },
1011         [pbn_b0_4_921600] = {
1012                 .flags          = FL_BASE0,
1013                 .num_ports      = 4,
1014                 .base_baud      = 921600,
1015                 .uart_offset    = 8,
1016         },
1017
1018         [pbn_b0_2_1130000] = {
1019                 .flags          = FL_BASE0,
1020                 .num_ports      = 2,
1021                 .base_baud      = 1130000,
1022                 .uart_offset    = 8,
1023         },
1024
1025         [pbn_b0_4_1152000] = {
1026                 .flags          = FL_BASE0,
1027                 .num_ports      = 4,
1028                 .base_baud      = 1152000,
1029                 .uart_offset    = 8,
1030         },
1031
1032         [pbn_b0_bt_1_115200] = {
1033                 .flags          = FL_BASE0|FL_BASE_BARS,
1034                 .num_ports      = 1,
1035                 .base_baud      = 115200,
1036                 .uart_offset    = 8,
1037         },
1038         [pbn_b0_bt_2_115200] = {
1039                 .flags          = FL_BASE0|FL_BASE_BARS,
1040                 .num_ports      = 2,
1041                 .base_baud      = 115200,
1042                 .uart_offset    = 8,
1043         },
1044         [pbn_b0_bt_8_115200] = {
1045                 .flags          = FL_BASE0|FL_BASE_BARS,
1046                 .num_ports      = 8,
1047                 .base_baud      = 115200,
1048                 .uart_offset    = 8,
1049         },
1050
1051         [pbn_b0_bt_1_460800] = {
1052                 .flags          = FL_BASE0|FL_BASE_BARS,
1053                 .num_ports      = 1,
1054                 .base_baud      = 460800,
1055                 .uart_offset    = 8,
1056         },
1057         [pbn_b0_bt_2_460800] = {
1058                 .flags          = FL_BASE0|FL_BASE_BARS,
1059                 .num_ports      = 2,
1060                 .base_baud      = 460800,
1061                 .uart_offset    = 8,
1062         },
1063         [pbn_b0_bt_4_460800] = {
1064                 .flags          = FL_BASE0|FL_BASE_BARS,
1065                 .num_ports      = 4,
1066                 .base_baud      = 460800,
1067                 .uart_offset    = 8,
1068         },
1069
1070         [pbn_b0_bt_1_921600] = {
1071                 .flags          = FL_BASE0|FL_BASE_BARS,
1072                 .num_ports      = 1,
1073                 .base_baud      = 921600,
1074                 .uart_offset    = 8,
1075         },
1076         [pbn_b0_bt_2_921600] = {
1077                 .flags          = FL_BASE0|FL_BASE_BARS,
1078                 .num_ports      = 2,
1079                 .base_baud      = 921600,
1080                 .uart_offset    = 8,
1081         },
1082         [pbn_b0_bt_4_921600] = {
1083                 .flags          = FL_BASE0|FL_BASE_BARS,
1084                 .num_ports      = 4,
1085                 .base_baud      = 921600,
1086                 .uart_offset    = 8,
1087         },
1088         [pbn_b0_bt_8_921600] = {
1089                 .flags          = FL_BASE0|FL_BASE_BARS,
1090                 .num_ports      = 8,
1091                 .base_baud      = 921600,
1092                 .uart_offset    = 8,
1093         },
1094
1095         [pbn_b1_1_115200] = {
1096                 .flags          = FL_BASE1,
1097                 .num_ports      = 1,
1098                 .base_baud      = 115200,
1099                 .uart_offset    = 8,
1100         },
1101         [pbn_b1_2_115200] = {
1102                 .flags          = FL_BASE1,
1103                 .num_ports      = 2,
1104                 .base_baud      = 115200,
1105                 .uart_offset    = 8,
1106         },
1107         [pbn_b1_4_115200] = {
1108                 .flags          = FL_BASE1,
1109                 .num_ports      = 4,
1110                 .base_baud      = 115200,
1111                 .uart_offset    = 8,
1112         },
1113         [pbn_b1_8_115200] = {
1114                 .flags          = FL_BASE1,
1115                 .num_ports      = 8,
1116                 .base_baud      = 115200,
1117                 .uart_offset    = 8,
1118         },
1119
1120         [pbn_b1_1_921600] = {
1121                 .flags          = FL_BASE1,
1122                 .num_ports      = 1,
1123                 .base_baud      = 921600,
1124                 .uart_offset    = 8,
1125         },
1126         [pbn_b1_2_921600] = {
1127                 .flags          = FL_BASE1,
1128                 .num_ports      = 2,
1129                 .base_baud      = 921600,
1130                 .uart_offset    = 8,
1131         },
1132         [pbn_b1_4_921600] = {
1133                 .flags          = FL_BASE1,
1134                 .num_ports      = 4,
1135                 .base_baud      = 921600,
1136                 .uart_offset    = 8,
1137         },
1138         [pbn_b1_8_921600] = {
1139                 .flags          = FL_BASE1,
1140                 .num_ports      = 8,
1141                 .base_baud      = 921600,
1142                 .uart_offset    = 8,
1143         },
1144
1145         [pbn_b1_bt_2_921600] = {
1146                 .flags          = FL_BASE1|FL_BASE_BARS,
1147                 .num_ports      = 2,
1148                 .base_baud      = 921600,
1149                 .uart_offset    = 8,
1150         },
1151
1152         [pbn_b1_1_1382400] = {
1153                 .flags          = FL_BASE1,
1154                 .num_ports      = 1,
1155                 .base_baud      = 1382400,
1156                 .uart_offset    = 8,
1157         },
1158         [pbn_b1_2_1382400] = {
1159                 .flags          = FL_BASE1,
1160                 .num_ports      = 2,
1161                 .base_baud      = 1382400,
1162                 .uart_offset    = 8,
1163         },
1164         [pbn_b1_4_1382400] = {
1165                 .flags          = FL_BASE1,
1166                 .num_ports      = 4,
1167                 .base_baud      = 1382400,
1168                 .uart_offset    = 8,
1169         },
1170         [pbn_b1_8_1382400] = {
1171                 .flags          = FL_BASE1,
1172                 .num_ports      = 8,
1173                 .base_baud      = 1382400,
1174                 .uart_offset    = 8,
1175         },
1176
1177         [pbn_b2_1_115200] = {
1178                 .flags          = FL_BASE2,
1179                 .num_ports      = 1,
1180                 .base_baud      = 115200,
1181                 .uart_offset    = 8,
1182         },
1183         [pbn_b2_8_115200] = {
1184                 .flags          = FL_BASE2,
1185                 .num_ports      = 8,
1186                 .base_baud      = 115200,
1187                 .uart_offset    = 8,
1188         },
1189
1190         [pbn_b2_1_460800] = {
1191                 .flags          = FL_BASE2,
1192                 .num_ports      = 1,
1193                 .base_baud      = 460800,
1194                 .uart_offset    = 8,
1195         },
1196         [pbn_b2_4_460800] = {
1197                 .flags          = FL_BASE2,
1198                 .num_ports      = 4,
1199                 .base_baud      = 460800,
1200                 .uart_offset    = 8,
1201         },
1202         [pbn_b2_8_460800] = {
1203                 .flags          = FL_BASE2,
1204                 .num_ports      = 8,
1205                 .base_baud      = 460800,
1206                 .uart_offset    = 8,
1207         },
1208         [pbn_b2_16_460800] = {
1209                 .flags          = FL_BASE2,
1210                 .num_ports      = 16,
1211                 .base_baud      = 460800,
1212                 .uart_offset    = 8,
1213          },
1214
1215         [pbn_b2_1_921600] = {
1216                 .flags          = FL_BASE2,
1217                 .num_ports      = 1,
1218                 .base_baud      = 921600,
1219                 .uart_offset    = 8,
1220         },
1221         [pbn_b2_4_921600] = {
1222                 .flags          = FL_BASE2,
1223                 .num_ports      = 4,
1224                 .base_baud      = 921600,
1225                 .uart_offset    = 8,
1226         },
1227         [pbn_b2_8_921600] = {
1228                 .flags          = FL_BASE2,
1229                 .num_ports      = 8,
1230                 .base_baud      = 921600,
1231                 .uart_offset    = 8,
1232         },
1233
1234         [pbn_b2_bt_1_115200] = {
1235                 .flags          = FL_BASE2|FL_BASE_BARS,
1236                 .num_ports      = 1,
1237                 .base_baud      = 115200,
1238                 .uart_offset    = 8,
1239         },
1240         [pbn_b2_bt_2_115200] = {
1241                 .flags          = FL_BASE2|FL_BASE_BARS,
1242                 .num_ports      = 2,
1243                 .base_baud      = 115200,
1244                 .uart_offset    = 8,
1245         },
1246         [pbn_b2_bt_4_115200] = {
1247                 .flags          = FL_BASE2|FL_BASE_BARS,
1248                 .num_ports      = 4,
1249                 .base_baud      = 115200,
1250                 .uart_offset    = 8,
1251         },
1252
1253         [pbn_b2_bt_2_921600] = {
1254                 .flags          = FL_BASE2|FL_BASE_BARS,
1255                 .num_ports      = 2,
1256                 .base_baud      = 921600,
1257                 .uart_offset    = 8,
1258         },
1259         [pbn_b2_bt_4_921600] = {
1260                 .flags          = FL_BASE2|FL_BASE_BARS,
1261                 .num_ports      = 4,
1262                 .base_baud      = 921600,
1263                 .uart_offset    = 8,
1264         },
1265
1266         [pbn_b3_4_115200] = {
1267                 .flags          = FL_BASE3,
1268                 .num_ports      = 4,
1269                 .base_baud      = 115200,
1270                 .uart_offset    = 8,
1271         },
1272         [pbn_b3_8_115200] = {
1273                 .flags          = FL_BASE3,
1274                 .num_ports      = 8,
1275                 .base_baud      = 115200,
1276                 .uart_offset    = 8,
1277         },
1278
1279         /*
1280          * Entries following this are board-specific.
1281          */
1282
1283         /*
1284          * Panacom - IOMEM
1285          */
1286         [pbn_panacom] = {
1287                 .flags          = FL_BASE2,
1288                 .num_ports      = 2,
1289                 .base_baud      = 921600,
1290                 .uart_offset    = 0x400,
1291                 .reg_shift      = 7,
1292         },
1293         [pbn_panacom2] = {
1294                 .flags          = FL_BASE2|FL_BASE_BARS,
1295                 .num_ports      = 2,
1296                 .base_baud      = 921600,
1297                 .uart_offset    = 0x400,
1298                 .reg_shift      = 7,
1299         },
1300         [pbn_panacom4] = {
1301                 .flags          = FL_BASE2|FL_BASE_BARS,
1302                 .num_ports      = 4,
1303                 .base_baud      = 921600,
1304                 .uart_offset    = 0x400,
1305                 .reg_shift      = 7,
1306         },
1307
1308         [pbn_exsys_4055] = {
1309                 .flags          = FL_BASE2,
1310                 .num_ports      = 4,
1311                 .base_baud      = 115200,
1312                 .uart_offset    = 8,
1313         },
1314
1315         /* I think this entry is broken - the first_offset looks wrong --rmk */
1316         [pbn_plx_romulus] = {
1317                 .flags          = FL_BASE2,
1318                 .num_ports      = 4,
1319                 .base_baud      = 921600,
1320                 .uart_offset    = 8 << 2,
1321                 .reg_shift      = 2,
1322                 .first_offset   = 0x03,
1323         },
1324
1325         /*
1326          * This board uses the size of PCI Base region 0 to
1327          * signal now many ports are available
1328          */
1329         [pbn_oxsemi] = {
1330                 .flags          = FL_BASE0|FL_REGION_SZ_CAP,
1331                 .num_ports      = 32,
1332                 .base_baud      = 115200,
1333                 .uart_offset    = 8,
1334         },
1335
1336         /*
1337          * EKF addition for i960 Boards form EKF with serial port.
1338          * Max 256 ports.
1339          */
1340         [pbn_intel_i960] = {
1341                 .flags          = FL_BASE0,
1342                 .num_ports      = 32,
1343                 .base_baud      = 921600,
1344                 .uart_offset    = 8 << 2,
1345                 .reg_shift      = 2,
1346                 .first_offset   = 0x10000,
1347         },
1348         [pbn_sgi_ioc3] = {
1349                 .flags          = FL_BASE0|FL_NOIRQ,
1350                 .num_ports      = 1,
1351                 .base_baud      = 458333,
1352                 .uart_offset    = 8,
1353                 .reg_shift      = 0,
1354                 .first_offset   = 0x20178,
1355         },
1356
1357         /*
1358          * NEC Vrc-5074 (Nile 4) builtin UART.
1359          */
1360         [pbn_nec_nile4] = {
1361                 .flags          = FL_BASE0,
1362                 .num_ports      = 1,
1363                 .base_baud      = 520833,
1364                 .uart_offset    = 8 << 3,
1365                 .reg_shift      = 3,
1366                 .first_offset   = 0x300,
1367         },
1368
1369         /*
1370          * Computone - uses IOMEM.
1371          */
1372         [pbn_computone_4] = {
1373                 .flags          = FL_BASE0,
1374                 .num_ports      = 4,
1375                 .base_baud      = 921600,
1376                 .uart_offset    = 0x40,
1377                 .reg_shift      = 2,
1378                 .first_offset   = 0x200,
1379         },
1380         [pbn_computone_6] = {
1381                 .flags          = FL_BASE0,
1382                 .num_ports      = 6,
1383                 .base_baud      = 921600,
1384                 .uart_offset    = 0x40,
1385                 .reg_shift      = 2,
1386                 .first_offset   = 0x200,
1387         },
1388         [pbn_computone_8] = {
1389                 .flags          = FL_BASE0,
1390                 .num_ports      = 8,
1391                 .base_baud      = 921600,
1392                 .uart_offset    = 0x40,
1393                 .reg_shift      = 2,
1394                 .first_offset   = 0x200,
1395         },
1396         [pbn_sbsxrsio] = {
1397                 .flags          = FL_BASE0,
1398                 .num_ports      = 8,
1399                 .base_baud      = 460800,
1400                 .uart_offset    = 256,
1401                 .reg_shift      = 4,
1402         },
1403         /*
1404          * Exar Corp. XR17C15[248] Dual/Quad/Octal UART
1405          *  Only basic 16550A support.
1406          *  XR17C15[24] are not tested, but they should work.
1407          */
1408         [pbn_exar_XR17C152] = {
1409                 .flags          = FL_BASE0,
1410                 .num_ports      = 2,
1411                 .base_baud      = 921600,
1412                 .uart_offset    = 0x200,
1413         },
1414         [pbn_exar_XR17C154] = {
1415                 .flags          = FL_BASE0,
1416                 .num_ports      = 4,
1417                 .base_baud      = 921600,
1418                 .uart_offset    = 0x200,
1419         },
1420         [pbn_exar_XR17C158] = {
1421                 .flags          = FL_BASE0,
1422                 .num_ports      = 8,
1423                 .base_baud      = 921600,
1424                 .uart_offset    = 0x200,
1425         },
1426 };
1427
1428 /*
1429  * Given a complete unknown PCI device, try to use some heuristics to
1430  * guess what the configuration might be, based on the pitiful PCI
1431  * serial specs.  Returns 0 on success, 1 on failure.
1432  */
1433 static int __devinit
1434 serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
1435 {
1436         int num_iomem, num_port, first_port = -1, i;
1437
1438         /*
1439          * If it is not a communications device or the programming
1440          * interface is greater than 6, give up.
1441          *
1442          * (Should we try to make guesses for multiport serial devices
1443          * later?)
1444          */
1445         if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) &&
1446              ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) ||
1447             (dev->class & 0xff) > 6)
1448                 return -ENODEV;
1449
1450         num_iomem = num_port = 0;
1451         for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
1452                 if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
1453                         num_port++;
1454                         if (first_port == -1)
1455                                 first_port = i;
1456                 }
1457                 if (pci_resource_flags(dev, i) & IORESOURCE_MEM)
1458                         num_iomem++;
1459         }
1460
1461         /*
1462          * If there is 1 or 0 iomem regions, and exactly one port,
1463          * use it.  We guess the number of ports based on the IO
1464          * region size.
1465          */
1466         if (num_iomem <= 1 && num_port == 1) {
1467                 board->flags = first_port;
1468                 board->num_ports = pci_resource_len(dev, first_port) / 8;
1469                 return 0;
1470         }
1471
1472         /*
1473          * Now guess if we've got a board which indexes by BARs.
1474          * Each IO BAR should be 8 bytes, and they should follow
1475          * consecutively.
1476          */
1477         first_port = -1;
1478         num_port = 0;
1479         for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
1480                 if (pci_resource_flags(dev, i) & IORESOURCE_IO &&
1481                     pci_resource_len(dev, i) == 8 &&
1482                     (first_port == -1 || (first_port + num_port) == i)) {
1483                         num_port++;
1484                         if (first_port == -1)
1485                                 first_port = i;
1486                 }
1487         }
1488
1489         if (num_port > 1) {
1490                 board->flags = first_port | FL_BASE_BARS;
1491                 board->num_ports = num_port;
1492                 return 0;
1493         }
1494
1495         return -ENODEV;
1496 }
1497
1498 static inline int
1499 serial_pci_matches(struct pciserial_board *board,
1500                    struct pciserial_board *guessed)
1501 {
1502         return
1503             board->num_ports == guessed->num_ports &&
1504             board->base_baud == guessed->base_baud &&
1505             board->uart_offset == guessed->uart_offset &&
1506             board->reg_shift == guessed->reg_shift &&
1507             board->first_offset == guessed->first_offset;
1508 }
1509
1510 struct serial_private *
1511 pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board)
1512 {
1513         struct uart_port serial_port;
1514         struct serial_private *priv;
1515         struct pci_serial_quirk *quirk;
1516         int rc, nr_ports, i;
1517
1518         nr_ports = board->num_ports;
1519
1520         /*
1521          * Find an init and setup quirks.
1522          */
1523         quirk = find_quirk(dev);
1524
1525         /*
1526          * Run the new-style initialization function.
1527          * The initialization function returns:
1528          *  <0  - error
1529          *   0  - use board->num_ports
1530          *  >0  - number of ports
1531          */
1532         if (quirk->init) {
1533                 rc = quirk->init(dev);
1534                 if (rc < 0) {
1535                         priv = ERR_PTR(rc);
1536                         goto err_out;
1537                 }
1538                 if (rc)
1539                         nr_ports = rc;
1540         }
1541
1542         priv = kmalloc(sizeof(struct serial_private) +
1543                        sizeof(unsigned int) * nr_ports,
1544                        GFP_KERNEL);
1545         if (!priv) {
1546                 priv = ERR_PTR(-ENOMEM);
1547                 goto err_deinit;
1548         }
1549
1550         memset(priv, 0, sizeof(struct serial_private) +
1551                         sizeof(unsigned int) * nr_ports);
1552
1553         priv->dev = dev;
1554         priv->quirk = quirk;
1555
1556         memset(&serial_port, 0, sizeof(struct uart_port));
1557         serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
1558         serial_port.uartclk = board->base_baud * 16;
1559         serial_port.irq = get_pci_irq(dev, board);
1560         serial_port.dev = &dev->dev;
1561
1562         for (i = 0; i < nr_ports; i++) {
1563                 if (quirk->setup(priv, board, &serial_port, i))
1564                         break;
1565
1566 #ifdef SERIAL_DEBUG_PCI
1567                 printk("Setup PCI port: port %x, irq %d, type %d\n",
1568                        serial_port.iobase, serial_port.irq, serial_port.iotype);
1569 #endif
1570
1571                 priv->line[i] = serial8250_register_port(&serial_port);
1572                 if (priv->line[i] < 0) {
1573                         printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]);
1574                         break;
1575                 }
1576         }
1577
1578         priv->nr = i;
1579
1580         return priv;
1581
1582  err_deinit:
1583         if (quirk->exit)
1584                 quirk->exit(dev);
1585  err_out:
1586         return priv;
1587 }
1588 EXPORT_SYMBOL_GPL(pciserial_init_ports);
1589
1590 void pciserial_remove_ports(struct serial_private *priv)
1591 {
1592         struct pci_serial_quirk *quirk;
1593         int i;
1594
1595         for (i = 0; i < priv->nr; i++)
1596                 serial8250_unregister_port(priv->line[i]);
1597
1598         for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
1599                 if (priv->remapped_bar[i])
1600                         iounmap(priv->remapped_bar[i]);
1601                 priv->remapped_bar[i] = NULL;
1602         }
1603
1604         /*
1605          * Find the exit quirks.
1606          */
1607         quirk = find_quirk(priv->dev);
1608         if (quirk->exit)
1609                 quirk->exit(priv->dev);
1610
1611         kfree(priv);
1612 }
1613 EXPORT_SYMBOL_GPL(pciserial_remove_ports);
1614
1615 void pciserial_suspend_ports(struct serial_private *priv)
1616 {
1617         int i;
1618
1619         for (i = 0; i < priv->nr; i++)
1620                 if (priv->line[i] >= 0)
1621                         serial8250_suspend_port(priv->line[i]);
1622 }
1623 EXPORT_SYMBOL_GPL(pciserial_suspend_ports);
1624
1625 void pciserial_resume_ports(struct serial_private *priv)
1626 {
1627         int i;
1628
1629         /*
1630          * Ensure that the board is correctly configured.
1631          */
1632         if (priv->quirk->init)
1633                 priv->quirk->init(priv->dev);
1634
1635         for (i = 0; i < priv->nr; i++)
1636                 if (priv->line[i] >= 0)
1637                         serial8250_resume_port(priv->line[i]);
1638 }
1639 EXPORT_SYMBOL_GPL(pciserial_resume_ports);
1640
1641 /*
1642  * Probe one serial board.  Unfortunately, there is no rhyme nor reason
1643  * to the arrangement of serial ports on a PCI card.
1644  */
1645 static int __devinit
1646 pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
1647 {
1648         struct serial_private *priv;
1649         struct pciserial_board *board, tmp;
1650         int rc;
1651
1652         if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
1653                 printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n",
1654                         ent->driver_data);
1655                 return -EINVAL;
1656         }
1657
1658         board = &pci_boards[ent->driver_data];
1659
1660         rc = pci_enable_device(dev);
1661         if (rc)
1662                 return rc;
1663
1664         if (ent->driver_data == pbn_default) {
1665                 /*
1666                  * Use a copy of the pci_board entry for this;
1667                  * avoid changing entries in the table.
1668                  */
1669                 memcpy(&tmp, board, sizeof(struct pciserial_board));
1670                 board = &tmp;
1671
1672                 /*
1673                  * We matched one of our class entries.  Try to
1674                  * determine the parameters of this board.
1675                  */
1676                 rc = serial_pci_guess_board(dev, board);
1677                 if (rc)
1678                         goto disable;
1679         } else {
1680                 /*
1681                  * We matched an explicit entry.  If we are able to
1682                  * detect this boards settings with our heuristic,
1683                  * then we no longer need this entry.
1684                  */
1685                 memcpy(&tmp, &pci_boards[pbn_default],
1686                        sizeof(struct pciserial_board));
1687                 rc = serial_pci_guess_board(dev, &tmp);
1688                 if (rc == 0 && serial_pci_matches(board, &tmp))
1689                         moan_device("Redundant entry in serial pci_table.",
1690                                     dev);
1691         }
1692
1693         priv = pciserial_init_ports(dev, board);
1694         if (!IS_ERR(priv)) {
1695                 pci_set_drvdata(dev, priv);
1696                 return 0;
1697         }
1698
1699         rc = PTR_ERR(priv);
1700
1701  disable:
1702         pci_disable_device(dev);
1703         return rc;
1704 }
1705
1706 static void __devexit pciserial_remove_one(struct pci_dev *dev)
1707 {
1708         struct serial_private *priv = pci_get_drvdata(dev);
1709
1710         pci_set_drvdata(dev, NULL);
1711
1712         pciserial_remove_ports(priv);
1713
1714         pci_disable_device(dev);
1715 }
1716
1717 static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state)
1718 {
1719         struct serial_private *priv = pci_get_drvdata(dev);
1720
1721         if (priv)
1722                 pciserial_suspend_ports(priv);
1723
1724         pci_save_state(dev);
1725         pci_set_power_state(dev, pci_choose_state(dev, state));
1726         return 0;
1727 }
1728
1729 static int pciserial_resume_one(struct pci_dev *dev)
1730 {
1731         struct serial_private *priv = pci_get_drvdata(dev);
1732
1733         pci_set_power_state(dev, PCI_D0);
1734         pci_restore_state(dev);
1735
1736         if (priv) {
1737                 /*
1738                  * The device may have been disabled.  Re-enable it.
1739                  */
1740                 pci_enable_device(dev);
1741
1742                 pciserial_resume_ports(priv);
1743         }
1744         return 0;
1745 }
1746
1747 static struct pci_device_id serial_pci_tbl[] = {
1748         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
1749                 PCI_SUBVENDOR_ID_CONNECT_TECH,
1750                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
1751                 pbn_b1_8_1382400 },
1752         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
1753                 PCI_SUBVENDOR_ID_CONNECT_TECH,
1754                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
1755                 pbn_b1_4_1382400 },
1756         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
1757                 PCI_SUBVENDOR_ID_CONNECT_TECH,
1758                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
1759                 pbn_b1_2_1382400 },
1760         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1761                 PCI_SUBVENDOR_ID_CONNECT_TECH,
1762                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
1763                 pbn_b1_8_1382400 },
1764         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1765                 PCI_SUBVENDOR_ID_CONNECT_TECH,
1766                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
1767                 pbn_b1_4_1382400 },
1768         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1769                 PCI_SUBVENDOR_ID_CONNECT_TECH,
1770                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
1771                 pbn_b1_2_1382400 },
1772         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1773                 PCI_SUBVENDOR_ID_CONNECT_TECH,
1774                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0,
1775                 pbn_b1_8_921600 },
1776         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1777                 PCI_SUBVENDOR_ID_CONNECT_TECH,
1778                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0,
1779                 pbn_b1_8_921600 },
1780         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1781                 PCI_SUBVENDOR_ID_CONNECT_TECH,
1782                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0,
1783                 pbn_b1_4_921600 },
1784         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1785                 PCI_SUBVENDOR_ID_CONNECT_TECH,
1786                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0,
1787                 pbn_b1_4_921600 },
1788         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1789                 PCI_SUBVENDOR_ID_CONNECT_TECH,
1790                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0,
1791                 pbn_b1_2_921600 },
1792         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1793                 PCI_SUBVENDOR_ID_CONNECT_TECH,
1794                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0,
1795                 pbn_b1_8_921600 },
1796         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1797                 PCI_SUBVENDOR_ID_CONNECT_TECH,
1798                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0,
1799                 pbn_b1_8_921600 },
1800         {       PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
1801                 PCI_SUBVENDOR_ID_CONNECT_TECH,
1802                 PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0,
1803                 pbn_b1_4_921600 },
1804
1805         {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530,
1806                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1807                 pbn_b2_bt_1_115200 },
1808         {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2,
1809                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1810                 pbn_b2_bt_2_115200 },
1811         {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422,
1812                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1813                 pbn_b2_bt_4_115200 },
1814         {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232,
1815                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1816                 pbn_b2_bt_2_115200 },
1817         {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4,
1818                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1819                 pbn_b2_bt_4_115200 },
1820         {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8,
1821                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1822                 pbn_b2_8_115200 },
1823         {       PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8,
1824                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1825                 pbn_b2_8_115200 },
1826
1827         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2,
1828                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1829                 pbn_b2_bt_2_115200 },
1830         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200,
1831                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1832                 pbn_b2_bt_2_921600 },
1833         /*
1834          * VScom SPCOM800, from sl@s.pl
1835          */
1836         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800,
1837                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1838                 pbn_b2_8_921600 },
1839         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077,
1840                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1841                 pbn_b2_4_921600 },
1842         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
1843                 PCI_SUBVENDOR_ID_KEYSPAN,
1844                 PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0,
1845                 pbn_panacom },
1846         {       PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM,
1847                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1848                 pbn_panacom4 },
1849         {       PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM,
1850                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1851                 pbn_panacom2 },
1852         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
1853                 PCI_SUBVENDOR_ID_CHASE_PCIFAST,
1854                 PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0,
1855                 pbn_b2_4_460800 },
1856         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
1857                 PCI_SUBVENDOR_ID_CHASE_PCIFAST,
1858                 PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0,
1859                 pbn_b2_8_460800 },
1860         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
1861                 PCI_SUBVENDOR_ID_CHASE_PCIFAST,
1862                 PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0,
1863                 pbn_b2_16_460800 },
1864         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
1865                 PCI_SUBVENDOR_ID_CHASE_PCIFAST,
1866                 PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0,
1867                 pbn_b2_16_460800 },
1868         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
1869                 PCI_SUBVENDOR_ID_CHASE_PCIRAS,
1870                 PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0,
1871                 pbn_b2_4_460800 },
1872         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
1873                 PCI_SUBVENDOR_ID_CHASE_PCIRAS,
1874                 PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0,
1875                 pbn_b2_8_460800 },
1876         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
1877                 PCI_SUBVENDOR_ID_EXSYS,
1878                 PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0,
1879                 pbn_exsys_4055 },
1880         /*
1881          * Megawolf Romulus PCI Serial Card, from Mike Hudson
1882          * (Exoray@isys.ca)
1883          */
1884         {       PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS,
1885                 0x10b5, 0x106a, 0, 0,
1886                 pbn_plx_romulus },
1887         {       PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100,
1888                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1889                 pbn_b1_4_115200 },
1890         {       PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100,
1891                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1892                 pbn_b1_2_115200 },
1893         {       PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D,
1894                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1895                 pbn_b1_8_115200 },
1896         {       PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M,
1897                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1898                 pbn_b1_8_115200 },
1899         {       PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954,
1900                 PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, 0, 0,
1901                 pbn_b0_4_921600 },
1902         {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
1903                 PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, 0, 0,
1904                 pbn_b0_4_1152000 },
1905
1906                 /*
1907                  * The below card is a little controversial since it is the
1908                  * subject of a PCI vendor/device ID clash.  (See
1909                  * www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html).
1910                  * For now just used the hex ID 0x950a.
1911                  */
1912         {       PCI_VENDOR_ID_OXSEMI, 0x950a,
1913                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1914                 pbn_b0_2_1130000 },
1915         {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
1916                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1917                 pbn_b0_4_115200 },
1918         {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952,
1919                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1920                 pbn_b0_bt_2_921600 },
1921
1922         /*
1923          * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards,
1924          * from skokodyn@yahoo.com
1925          */
1926         {       PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
1927                 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0,
1928                 pbn_sbsxrsio },
1929         {       PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
1930                 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0,
1931                 pbn_sbsxrsio },
1932         {       PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
1933                 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0,
1934                 pbn_sbsxrsio },
1935         {       PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
1936                 PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0,
1937                 pbn_sbsxrsio },
1938
1939         /*
1940          * Digitan DS560-558, from jimd@esoft.com
1941          */
1942         {       PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM,
1943                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1944                 pbn_b1_1_115200 },
1945
1946         /*
1947          * Titan Electronic cards
1948          *  The 400L and 800L have a custom setup quirk.
1949          */
1950         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100,
1951                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1952                 pbn_b0_1_921600 },
1953         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200,
1954                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1955                 pbn_b0_2_921600 },
1956         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400,
1957                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1958                 pbn_b0_4_921600 },
1959         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B,
1960                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1961                 pbn_b0_4_921600 },
1962         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L,
1963                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1964                 pbn_b1_1_921600 },
1965         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L,
1966                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1967                 pbn_b1_bt_2_921600 },
1968         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L,
1969                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1970                 pbn_b0_bt_4_921600 },
1971         {       PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L,
1972                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1973                 pbn_b0_bt_8_921600 },
1974
1975         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550,
1976                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1977                 pbn_b2_1_460800 },
1978         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650,
1979                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1980                 pbn_b2_1_460800 },
1981         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850,
1982                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1983                 pbn_b2_1_460800 },
1984         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550,
1985                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1986                 pbn_b2_bt_2_921600 },
1987         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650,
1988                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1989                 pbn_b2_bt_2_921600 },
1990         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850,
1991                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1992                 pbn_b2_bt_2_921600 },
1993         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550,
1994                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1995                 pbn_b2_bt_4_921600 },
1996         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650,
1997                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
1998                 pbn_b2_bt_4_921600 },
1999         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850,
2000                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2001                 pbn_b2_bt_4_921600 },
2002         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550,
2003                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2004                 pbn_b0_1_921600 },
2005         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650,
2006                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2007                 pbn_b0_1_921600 },
2008         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850,
2009                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2010                 pbn_b0_1_921600 },
2011         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550,
2012                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2013                 pbn_b0_bt_2_921600 },
2014         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650,
2015                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2016                 pbn_b0_bt_2_921600 },
2017         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850,
2018                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2019                 pbn_b0_bt_2_921600 },
2020         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550,
2021                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2022                 pbn_b0_bt_4_921600 },
2023         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650,
2024                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2025                 pbn_b0_bt_4_921600 },
2026         {       PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850,
2027                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2028                 pbn_b0_bt_4_921600 },
2029
2030         /*
2031          * Computone devices submitted by Doug McNash dmcnash@computone.com
2032          */
2033         {       PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
2034                 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4,
2035                 0, 0, pbn_computone_4 },
2036         {       PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
2037                 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8,
2038                 0, 0, pbn_computone_8 },
2039         {       PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
2040                 PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6,
2041                 0, 0, pbn_computone_6 },
2042
2043         {       PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N,
2044                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2045                 pbn_oxsemi },
2046         {       PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889,
2047                 PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0,
2048                 pbn_b0_bt_1_921600 },
2049
2050         /*
2051          * AFAVLAB serial card, from Harald Welte <laforge@gnumonks.org>
2052          */
2053         {       PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028,
2054                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2055                 pbn_b0_bt_8_115200 },
2056         {       PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P030,
2057                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2058                 pbn_b0_bt_8_115200 },
2059
2060         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL,
2061                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2062                 pbn_b0_bt_2_115200 },
2063         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A,
2064                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2065                 pbn_b0_bt_2_115200 },
2066         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B,
2067                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2068                 pbn_b0_bt_2_115200 },
2069         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A,
2070                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2071                 pbn_b0_bt_4_460800 },
2072         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_B,
2073                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2074                 pbn_b0_bt_4_460800 },
2075         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS,
2076                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2077                 pbn_b0_bt_2_460800 },
2078         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A,
2079                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2080                 pbn_b0_bt_2_460800 },
2081         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B,
2082                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2083                 pbn_b0_bt_2_460800 },
2084         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL,
2085                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2086                 pbn_b0_bt_1_115200 },
2087         {       PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650,
2088                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2089                 pbn_b0_bt_1_460800 },
2090
2091         /*
2092          * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com
2093          */
2094         {       PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4,
2095                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2096                 pbn_b1_1_1382400 },
2097
2098         /*
2099          * Dell Remote Access Card III - Tim_T_Murphy@Dell.com
2100          */
2101         {       PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RACIII,
2102                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2103                 pbn_b1_1_1382400 },
2104
2105         /*
2106          * RAStel 2 port modem, gerg@moreton.com.au
2107          */
2108         {       PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT,
2109                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2110                 pbn_b2_bt_2_115200 },
2111
2112         /*
2113          * EKF addition for i960 Boards form EKF with serial port
2114          */
2115         {       PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80960_RP,
2116                 0xE4BF, PCI_ANY_ID, 0, 0,
2117                 pbn_intel_i960 },
2118
2119         /*
2120          * Xircom Cardbus/Ethernet combos
2121          */
2122         {       PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM,
2123                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2124                 pbn_b0_1_115200 },
2125         /*
2126          * Xircom RBM56G cardbus modem - Dirk Arnold (temp entry)
2127          */
2128         {       PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_RBM56G,
2129                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2130                 pbn_b0_1_115200 },
2131
2132         /*
2133          * Untested PCI modems, sent in from various folks...
2134          */
2135
2136         /*
2137          * Elsa Model 56K PCI Modem, from Andreas Rath <arh@01019freenet.de>
2138          */
2139         {       PCI_VENDOR_ID_ROCKWELL, 0x1004,
2140                 0x1048, 0x1500, 0, 0,
2141                 pbn_b1_1_115200 },
2142
2143         {       PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
2144                 0xFF00, 0, 0, 0,
2145                 pbn_sgi_ioc3 },
2146
2147         /*
2148          * HP Diva card
2149          */
2150         {       PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA,
2151                 PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_RMP3, 0, 0,
2152                 pbn_b1_1_115200 },
2153         {       PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA,
2154                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2155                 pbn_b0_5_115200 },
2156         {       PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX,
2157                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2158                 pbn_b2_1_115200 },
2159
2160         /*
2161          * NEC Vrc-5074 (Nile 4) builtin UART.
2162          */
2163         {       PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_NILE4,
2164                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2165                 pbn_nec_nile4 },
2166
2167         {       PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4,
2168                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2169                 pbn_b3_4_115200 },
2170         {       PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8,
2171                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2172                 pbn_b3_8_115200 },
2173
2174         /*
2175          * Exar Corp. XR17C15[248] Dual/Quad/Octal UART
2176          */
2177         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
2178                 PCI_ANY_ID, PCI_ANY_ID,
2179                 0,
2180                 0, pbn_exar_XR17C152 },
2181         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
2182                 PCI_ANY_ID, PCI_ANY_ID,
2183                 0,
2184                 0, pbn_exar_XR17C154 },
2185         {       PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
2186                 PCI_ANY_ID, PCI_ANY_ID,
2187                 0,
2188                 0, pbn_exar_XR17C158 },
2189
2190         /*
2191          * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
2192          */
2193         {       PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560,
2194                 PCI_ANY_ID, PCI_ANY_ID, 0, 0,
2195                 pbn_b0_1_115200 },
2196
2197         /*
2198          * These entries match devices with class COMMUNICATION_SERIAL,
2199          * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
2200          */
2201         {       PCI_ANY_ID, PCI_ANY_ID,
2202                 PCI_ANY_ID, PCI_ANY_ID,
2203                 PCI_CLASS_COMMUNICATION_SERIAL << 8,
2204                 0xffff00, pbn_default },
2205         {       PCI_ANY_ID, PCI_ANY_ID,
2206                 PCI_ANY_ID, PCI_ANY_ID,
2207                 PCI_CLASS_COMMUNICATION_MODEM << 8,
2208                 0xffff00, pbn_default },
2209         {       PCI_ANY_ID, PCI_ANY_ID,
2210                 PCI_ANY_ID, PCI_ANY_ID,
2211                 PCI_CLASS_COMMUNICATION_MULTISERIAL << 8,
2212                 0xffff00, pbn_default },
2213         { 0, }
2214 };
2215
2216 static struct pci_driver serial_pci_driver = {
2217         .name           = "serial",
2218         .probe          = pciserial_init_one,
2219         .remove         = __devexit_p(pciserial_remove_one),
2220         .suspend        = pciserial_suspend_one,
2221         .resume         = pciserial_resume_one,
2222         .id_table       = serial_pci_tbl,
2223 };
2224
2225 static int __init serial8250_pci_init(void)
2226 {
2227         return pci_register_driver(&serial_pci_driver);
2228 }
2229
2230 static void __exit serial8250_pci_exit(void)
2231 {
2232         pci_unregister_driver(&serial_pci_driver);
2233 }
2234
2235 module_init(serial8250_pci_init);
2236 module_exit(serial8250_pci_exit);
2237
2238 MODULE_LICENSE("GPL");
2239 MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module");
2240 MODULE_DEVICE_TABLE(pci, serial_pci_tbl);