SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/scsi/st.c

   1 /*
   2    SCSI Tape Driver for Linux version 1.1 and newer. See the accompanying
   3    file Documentation/scsi/st.txt for more information.
   4
   5    History:
   6    Rewritten from Dwayne Forsyth's SCSI tape driver by Kai Makisara.
   7    Contribution and ideas from several people including (in alphabetical
   8    order) Klaus Ehrenfried, Eugene Exarevsky, Eric Lee Green, Wolfgang Denk,
   9    Steve Hirsch, Andreas Koppenh"ofer, Michael Leodolter, Eyal Lebedinsky,
  10    Michael Schaefer, J"org Weule, and Eric Youngdale.
  11
  12    Copyright 1992 - 2008 Kai Makisara
  13    email Kai.Makisara@kolumbus.fi
  14
  15    Some small formal changes - aeb, 950809
  16
  17    Last modified: 18-JAN-1998 Richard Gooch <rgooch@atnf.csiro.au> Devfs support
  18  */
  19
  20 static const char *verstr = "20080504";
  21
  22 #include <linux/module.h>
  23
  24 #include <linux/fs.h>
  25 #include <linux/kernel.h>
  26 #include <linux/sched.h>
  27 #include <linux/mm.h>
  28 #include <linux/init.h>
  29 #include <linux/string.h>
  30 #include <linux/errno.h>
  31 #include <linux/mtio.h>
  32 #include <linux/cdrom.h>
  33 #include <linux/ioctl.h>
  34 #include <linux/fcntl.h>
  35 #include <linux/spinlock.h>
  36 #include <linux/blkdev.h>
  37 #include <linux/moduleparam.h>
  38 #include <linux/cdev.h>
  39 #include <linux/delay.h>
  40 #include <linux/mutex.h>
  41 #include <linux/smp_lock.h>
  42
  43 #include <asm/uaccess.h>
  44 #include <asm/dma.h>
  45 #include <asm/system.h>
  46
  47 #include <scsi/scsi.h>
  48 #include <scsi/scsi_dbg.h>
  49 #include <scsi/scsi_device.h>
  50 #include <scsi/scsi_driver.h>
  51 #include <scsi/scsi_eh.h>
  52 #include <scsi/scsi_host.h>
  53 #include <scsi/scsi_ioctl.h>
  54 #include <scsi/sg.h>
  55
  56
  57 /* The driver prints some debugging information on the console if DEBUG
  58    is defined and non-zero. */
  59 #define DEBUG 0
  60
  61 #if DEBUG
  62 /* The message level for the debug messages is currently set to KERN_NOTICE
  63    so that people can easily see the messages. Later when the debugging messages
  64    in the drivers are more widely classified, this may be changed to KERN_DEBUG. */
  65 #define ST_DEB_MSG  KERN_NOTICE
  66 #define DEB(a) a
  67 #define DEBC(a) if (debugging) { a ; }
  68 #else
  69 #define DEB(a)
  70 #define DEBC(a)
  71 #endif
  72
  73 #define ST_KILOBYTE 1024
  74
  75 #include "st_options.h"
  76 #include "st.h"
  77
  78 static int buffer_kbs;
  79 static int max_sg_segs;
  80 static int try_direct_io = TRY_DIRECT_IO;
  81 static int try_rdio = 1;
  82 static int try_wdio = 1;
  83
  84 static int st_dev_max;
  85 static int st_nr_dev;
  86
  87 static struct class *st_sysfs_class;
  88
  89 MODULE_AUTHOR("Kai Makisara");
  90 MODULE_DESCRIPTION("SCSI tape (st) driver");
  91 MODULE_LICENSE("GPL");
  92 MODULE_ALIAS_CHARDEV_MAJOR(SCSI_TAPE_MAJOR);
  93 MODULE_ALIAS_SCSI_DEVICE(TYPE_TAPE);
  94
  95 /* Set 'perm' (4th argument) to 0 to disable module_param's definition
  96  * of sysfs parameters (which module_param doesn't yet support).
  97  * Sysfs parameters defined explicitly later.
  98  */
  99 module_param_named(buffer_kbs, buffer_kbs, int, 0);
 100 MODULE_PARM_DESC(buffer_kbs, "Default driver buffer size for fixed block mode (KB; 32)");
 101 module_param_named(max_sg_segs, max_sg_segs, int, 0);
 102 MODULE_PARM_DESC(max_sg_segs, "Maximum number of scatter/gather segments to use (256)");
 103 module_param_named(try_direct_io, try_direct_io, int, 0);
 104 MODULE_PARM_DESC(try_direct_io, "Try direct I/O between user buffer and tape drive (1)");
 105
 106 /* Extra parameters for testing */
 107 module_param_named(try_rdio, try_rdio, int, 0);
 108 MODULE_PARM_DESC(try_rdio, "Try direct read i/o when possible");
 109 module_param_named(try_wdio, try_wdio, int, 0);
 110 MODULE_PARM_DESC(try_wdio, "Try direct write i/o when possible");
 111
 112 #ifndef MODULE
 113 static int write_threshold_kbs;  /* retained for compatibility */
 114 static struct st_dev_parm {
 115         char *name;
 116         int *val;
 117 } parms[] __initdata = {
 118         {
 119                 "buffer_kbs", &buffer_kbs
 120         },
 121         {       /* Retained for compatibility with 2.4 */
 122                 "write_threshold_kbs", &write_threshold_kbs
 123         },
 124         {
 125                 "max_sg_segs", NULL
 126         },
 127         {
 128                 "try_direct_io", &try_direct_io
 129         }
 130 };
 131 #endif
 132
 133 /* Restrict the number of modes so that names for all are assigned */
 134 #if ST_NBR_MODES > 16
 135 #error "Maximum number of modes is 16"
 136 #endif
 137 /* Bit reversed order to get same names for same minors with all
 138    mode counts */
 139 static const char *st_formats[] = {
 140         "",  "r", "k", "s", "l", "t", "o", "u",
 141         "m", "v", "p", "x", "a", "y", "q", "z"};
 142
 143 /* The default definitions have been moved to st_options.h */
 144
 145 #define ST_FIXED_BUFFER_SIZE (ST_FIXED_BUFFER_BLOCKS * ST_KILOBYTE)
 146
 147 /* The buffer size should fit into the 24 bits for length in the
 148    6-byte SCSI read and write commands. */
 149 #if ST_FIXED_BUFFER_SIZE >= (2 << 24 - 1)
 150 #error "Buffer size should not exceed (2 << 24 - 1) bytes!"
 151 #endif
 152
 153 static int debugging = DEBUG;
 154
 155 #define MAX_RETRIES 0
 156 #define MAX_WRITE_RETRIES 0
 157 #define MAX_READY_RETRIES 0
 158 #define NO_TAPE  NOT_READY
 159
 160 #define ST_TIMEOUT (900 * HZ)
 161 #define ST_LONG_TIMEOUT (14000 * HZ)
 162
 163 /* Remove mode bits and auto-rewind bit (7) */
 164 #define TAPE_NR(x) ( ((iminor(x) & ~255) >> (ST_NBR_MODE_BITS + 1)) | \
 165     (iminor(x) & ~(-1 << ST_MODE_SHIFT)) )
 166 #define TAPE_MODE(x) ((iminor(x) & ST_MODE_MASK) >> ST_MODE_SHIFT)
 167
 168 /* Construct the minor number from the device (d), mode (m), and non-rewind (n) data */
 169 #define TAPE_MINOR(d, m, n) (((d & ~(255 >> (ST_NBR_MODE_BITS + 1))) << (ST_NBR_MODE_BITS + 1)) | \
 170   (d & (255 >> (ST_NBR_MODE_BITS + 1))) | (m << ST_MODE_SHIFT) | ((n != 0) << 7) )
 171
 172 /* Internal ioctl to set both density (uppermost 8 bits) and blocksize (lower
 173    24 bits) */
 174 #define SET_DENS_AND_BLK 0x10001
 175
 176 static DEFINE_RWLOCK(st_dev_arr_lock);
 177
 178 static int st_fixed_buffer_size = ST_FIXED_BUFFER_SIZE;
 179 static int st_max_sg_segs = ST_MAX_SG;
 180
 181 static struct scsi_tape **scsi_tapes = NULL;
 182
 183 static int modes_defined;
 184
 185 static int enlarge_buffer(struct st_buffer *, int, int);
 186 static void clear_buffer(struct st_buffer *);
 187 static void normalize_buffer(struct st_buffer *);
 188 static int append_to_buffer(const char __user *, struct st_buffer *, int);
 189 static int from_buffer(struct st_buffer *, char __user *, int);
 190 static void move_buffer_data(struct st_buffer *, int);
 191
 192 static int sgl_map_user_pages(struct st_buffer *, const unsigned int,
 193                               unsigned long, size_t, int);
 194 static int sgl_unmap_user_pages(struct st_buffer *, const unsigned int, int);
 195
 196 static int st_probe(struct device *);
 197 static int st_remove(struct device *);
 198
 199 static int do_create_sysfs_files(void);
 200 static void do_remove_sysfs_files(void);
 201 static int do_create_class_files(struct scsi_tape *, int, int);
 202
 203 static struct scsi_driver st_template = {
 204         .owner                  = THIS_MODULE,
 205         .gendrv = {
 206                 .name           = "st",
 207                 .probe          = st_probe,
 208                 .remove         = st_remove,
 209         },
 210 };
 211
 212 static int st_compression(struct scsi_tape *, int);
 213
 214 static int find_partition(struct scsi_tape *);
 215 static int switch_partition(struct scsi_tape *);
 216
 217 static int st_int_ioctl(struct scsi_tape *, unsigned int, unsigned long);
 218
 219 static void scsi_tape_release(struct kref *);
 220
 221 #define to_scsi_tape(obj) container_of(obj, struct scsi_tape, kref)
 222
 223 static DEFINE_MUTEX(st_ref_mutex);
 224
 225 \f
 226 #include "osst_detect.h"
 227 #ifndef SIGS_FROM_OSST
 228 #define SIGS_FROM_OSST \
 229         {"OnStream", "SC-", "", "osst"}, \
 230         {"OnStream", "DI-", "", "osst"}, \
 231         {"OnStream", "DP-", "", "osst"}, \
 232         {"OnStream", "USB", "", "osst"}, \
 233         {"OnStream", "FW-", "", "osst"}
 234 #endif
 235
 236 static struct scsi_tape *scsi_tape_get(int dev)
 237 {
 238         struct scsi_tape *STp = NULL;
 239
 240         mutex_lock(&st_ref_mutex);
 241         write_lock(&st_dev_arr_lock);
 242
 243         if (dev < st_dev_max && scsi_tapes != NULL)
 244                 STp = scsi_tapes[dev];
 245         if (!STp) goto out;
 246
 247         kref_get(&STp->kref);
 248
 249         if (!STp->device)
 250                 goto out_put;
 251
 252         if (scsi_device_get(STp->device))
 253                 goto out_put;
 254
 255         goto out;
 256
 257 out_put:
 258         kref_put(&STp->kref, scsi_tape_release);
 259         STp = NULL;
 260 out:
 261         write_unlock(&st_dev_arr_lock);
 262         mutex_unlock(&st_ref_mutex);
 263         return STp;
 264 }
 265
 266 static void scsi_tape_put(struct scsi_tape *STp)
 267 {
 268         struct scsi_device *sdev = STp->device;
 269
 270         mutex_lock(&st_ref_mutex);
 271         kref_put(&STp->kref, scsi_tape_release);
 272         scsi_device_put(sdev);
 273         mutex_unlock(&st_ref_mutex);
 274 }
 275
 276 struct st_reject_data {
 277         char *vendor;
 278         char *model;
 279         char *rev;
 280         char *driver_hint; /* Name of the correct driver, NULL if unknown */
 281 };
 282
 283 static struct st_reject_data reject_list[] = {
 284         /* {"XXX", "Yy-", "", NULL},  example */
 285         SIGS_FROM_OSST,
 286         {NULL, }};
 287
 288 /* If the device signature is on the list of incompatible drives, the
 289    function returns a pointer to the name of the correct driver (if known) */
 290 static char * st_incompatible(struct scsi_device* SDp)
 291 {
 292         struct st_reject_data *rp;
 293
 294         for (rp=&(reject_list[0]); rp->vendor != NULL; rp++)
 295                 if (!strncmp(rp->vendor, SDp->vendor, strlen(rp->vendor)) &&
 296                     !strncmp(rp->model, SDp->model, strlen(rp->model)) &&
 297                     !strncmp(rp->rev, SDp->rev, strlen(rp->rev))) {
 298                         if (rp->driver_hint)
 299                                 return rp->driver_hint;
 300                         else
 301                                 return "unknown";
 302                 }
 303         return NULL;
 304 }
 305 \f
 306
 307 static inline char *tape_name(struct scsi_tape *tape)
 308 {
 309         return tape->disk->disk_name;
 310 }
 311
 312
 313 static void st_analyze_sense(struct st_request *SRpnt, struct st_cmdstatus *s)
 314 {
 315         const u8 *ucp;
 316         const u8 *sense = SRpnt->sense;
 317
 318         s->have_sense = scsi_normalize_sense(SRpnt->sense,
 319                                 SCSI_SENSE_BUFFERSIZE, &s->sense_hdr);
 320         s->flags = 0;
 321
 322         if (s->have_sense) {
 323                 s->deferred = 0;
 324                 s->remainder_valid =
 325                         scsi_get_sense_info_fld(sense, SCSI_SENSE_BUFFERSIZE, &s->uremainder64);
 326                 switch (sense[0] & 0x7f) {
 327                 case 0x71:
 328                         s->deferred = 1;
 329                 case 0x70:
 330                         s->fixed_format = 1;
 331                         s->flags = sense[2] & 0xe0;
 332                         break;
 333                 case 0x73:
 334                         s->deferred = 1;
 335                 case 0x72:
 336                         s->fixed_format = 0;
 337                         ucp = scsi_sense_desc_find(sense, SCSI_SENSE_BUFFERSIZE, 4);
 338                         s->flags = ucp ? (ucp[3] & 0xe0) : 0;
 339                         break;
 340                 }
 341         }
 342 }
 343
 344
 345 /* Convert the result to success code */
 346 static int st_chk_result(struct scsi_tape *STp, struct st_request * SRpnt)
 347 {
 348         int result = SRpnt->result;
 349         u8 scode;
 350         DEB(const char *stp;)
 351         char *name = tape_name(STp);
 352         struct st_cmdstatus *cmdstatp;
 353
 354         if (!result)
 355                 return 0;
 356
 357         cmdstatp = &STp->buffer->cmdstat;
 358         st_analyze_sense(SRpnt, cmdstatp);
 359
 360         if (cmdstatp->have_sense)
 361                 scode = STp->buffer->cmdstat.sense_hdr.sense_key;
 362         else
 363                 scode = 0;
 364
 365         DEB(
 366         if (debugging) {
 367                 printk(ST_DEB_MSG "%s: Error: %x, cmd: %x %x %x %x %x %x\n",
 368                        name, result,
 369                        SRpnt->cmd[0], SRpnt->cmd[1], SRpnt->cmd[2],
 370                        SRpnt->cmd[3], SRpnt->cmd[4], SRpnt->cmd[5]);
 371                 if (cmdstatp->have_sense)
 372                          __scsi_print_sense(name, SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
 373         } ) /* end DEB */
 374         if (!debugging) { /* Abnormal conditions for tape */
 375                 if (!cmdstatp->have_sense)
 376                         printk(KERN_WARNING
 377                                "%s: Error %x (sugg. bt 0x%x, driver bt 0x%x, host bt 0x%x).\n",
 378                                name, result, suggestion(result),
 379                                driver_byte(result) & DRIVER_MASK, host_byte(result));
 380                 else if (cmdstatp->have_sense &&
 381                          scode != NO_SENSE &&
 382                          scode != RECOVERED_ERROR &&
 383                          /* scode != UNIT_ATTENTION && */
 384                          scode != BLANK_CHECK &&
 385                          scode != VOLUME_OVERFLOW &&
 386                          SRpnt->cmd[0] != MODE_SENSE &&
 387                          SRpnt->cmd[0] != TEST_UNIT_READY) {
 388
 389                         __scsi_print_sense(name, SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
 390                 }
 391         }
 392
 393         if (cmdstatp->fixed_format &&
 394             STp->cln_mode >= EXTENDED_SENSE_START) {  /* Only fixed format sense */
 395                 if (STp->cln_sense_value)
 396                         STp->cleaning_req |= ((SRpnt->sense[STp->cln_mode] &
 397                                                STp->cln_sense_mask) == STp->cln_sense_value);
 398                 else
 399                         STp->cleaning_req |= ((SRpnt->sense[STp->cln_mode] &
 400                                                STp->cln_sense_mask) != 0);
 401         }
 402         if (cmdstatp->have_sense &&
 403             cmdstatp->sense_hdr.asc == 0 && cmdstatp->sense_hdr.ascq == 0x17)
 404                 STp->cleaning_req = 1; /* ASC and ASCQ => cleaning requested */
 405
 406         STp->pos_unknown |= STp->device->was_reset;
 407
 408         if (cmdstatp->have_sense &&
 409             scode == RECOVERED_ERROR
 410 #if ST_RECOVERED_WRITE_FATAL
 411             && SRpnt->cmd[0] != WRITE_6
 412             && SRpnt->cmd[0] != WRITE_FILEMARKS
 413 #endif
 414             ) {
 415                 STp->recover_count++;
 416                 STp->recover_reg++;
 417
 418                 DEB(
 419                 if (debugging) {
 420                         if (SRpnt->cmd[0] == READ_6)
 421                                 stp = "read";
 422                         else if (SRpnt->cmd[0] == WRITE_6)
 423                                 stp = "write";
 424                         else
 425                                 stp = "ioctl";
 426                         printk(ST_DEB_MSG "%s: Recovered %s error (%d).\n", name, stp,
 427                                STp->recover_count);
 428                 } ) /* end DEB */
 429
 430                 if (cmdstatp->flags == 0)
 431                         return 0;
 432         }
 433         return (-EIO);
 434 }
 435
 436 static struct st_request *st_allocate_request(struct scsi_tape *stp)
 437 {
 438         struct st_request *streq;
 439
 440         streq = kzalloc(sizeof(*streq), GFP_KERNEL);
 441         if (streq)
 442                 streq->stp = stp;
 443         else {
 444                 DEBC(printk(KERN_ERR "%s: Can't get SCSI request.\n",
 445                             tape_name(stp)););
 446                 if (signal_pending(current))
 447                         stp->buffer->syscall_result = -EINTR;
 448                 else
 449                         stp->buffer->syscall_result = -EBUSY;
 450         }
 451
 452         return streq;
 453 }
 454
 455 static void st_release_request(struct st_request *streq)
 456 {
 457         kfree(streq);
 458 }
 459
 460 static void st_scsi_execute_end(struct request *req, int uptodate)
 461 {
 462         struct st_request *SRpnt = req->end_io_data;
 463         struct scsi_tape *STp = SRpnt->stp;
 464
 465         STp->buffer->cmdstat.midlevel_result = SRpnt->result = req->errors;
 466         STp->buffer->cmdstat.residual = req->data_len;
 467
 468         if (SRpnt->waiting)
 469                 complete(SRpnt->waiting);
 470
 471         blk_rq_unmap_user(SRpnt->bio);
 472         __blk_put_request(req->q, req);
 473 }
 474
 475 static int st_scsi_execute(struct st_request *SRpnt, const unsigned char *cmd,
 476                            int data_direction, void *buffer, unsigned bufflen,
 477                            int timeout, int retries)
 478 {
 479         struct request *req;
 480         struct rq_map_data *mdata = &SRpnt->stp->buffer->map_data;
 481         int err = 0;
 482         int write = (data_direction == DMA_TO_DEVICE);
 483
 484         req = blk_get_request(SRpnt->stp->device->request_queue, write,
 485                               GFP_KERNEL);
 486         if (!req)
 487                 return DRIVER_ERROR << 24;
 488
 489         req->cmd_type = REQ_TYPE_BLOCK_PC;
 490         req->cmd_flags |= REQ_QUIET;
 491
 492         mdata->null_mapped = 1;
 493
 494         err = blk_rq_map_user(req->q, req, mdata, NULL, bufflen, GFP_KERNEL);
 495         if (err) {
 496                 blk_put_request(req);
 497                 return DRIVER_ERROR << 24;
 498         }
 499
 500         SRpnt->bio = req->bio;
 501         req->cmd_len = COMMAND_SIZE(cmd[0]);
 502         memset(req->cmd, 0, BLK_MAX_CDB);
 503         memcpy(req->cmd, cmd, req->cmd_len);
 504         req->sense = SRpnt->sense;
 505         req->sense_len = 0;
 506         req->timeout = timeout;
 507         req->retries = retries;
 508         req->end_io_data = SRpnt;
 509
 510         blk_execute_rq_nowait(req->q, NULL, req, 1, st_scsi_execute_end);
 511         return 0;
 512 }
 513
 514 /* Do the scsi command. Waits until command performed if do_wait is true.
 515    Otherwise write_behind_check() is used to check that the command
 516    has finished. */
 517 static struct st_request *
 518 st_do_scsi(struct st_request * SRpnt, struct scsi_tape * STp, unsigned char *cmd,
 519            int bytes, int direction, int timeout, int retries, int do_wait)
 520 {
 521         struct completion *waiting;
 522         struct rq_map_data *mdata = &STp->buffer->map_data;
 523         int ret;
 524
 525         /* if async, make sure there's no command outstanding */
 526         if (!do_wait && ((STp->buffer)->last_SRpnt)) {
 527                 printk(KERN_ERR "%s: Async command already active.\n",
 528                        tape_name(STp));
 529                 if (signal_pending(current))
 530                         (STp->buffer)->syscall_result = (-EINTR);
 531                 else
 532                         (STp->buffer)->syscall_result = (-EBUSY);
 533                 return NULL;
 534         }
 535
 536         if (!SRpnt) {
 537                 SRpnt = st_allocate_request(STp);
 538                 if (!SRpnt)
 539                         return NULL;
 540         }
 541
 542         /* If async IO, set last_SRpnt. This ptr tells write_behind_check
 543            which IO is outstanding. It's nulled out when the IO completes. */
 544         if (!do_wait)
 545                 (STp->buffer)->last_SRpnt = SRpnt;
 546
 547         waiting = &STp->wait;
 548         init_completion(waiting);
 549         SRpnt->waiting = waiting;
 550
 551         if (STp->buffer->do_dio) {
 552                 mdata->nr_entries = STp->buffer->sg_segs;
 553                 mdata->pages = STp->buffer->mapped_pages;
 554         } else {
 555                 mdata->nr_entries =
 556                         DIV_ROUND_UP(bytes, PAGE_SIZE << mdata->page_order);
 557                 STp->buffer->map_data.pages = STp->buffer->reserved_pages;
 558                 STp->buffer->map_data.offset = 0;
 559         }
 560
 561         memcpy(SRpnt->cmd, cmd, sizeof(SRpnt->cmd));
 562         STp->buffer->cmdstat.have_sense = 0;
 563         STp->buffer->syscall_result = 0;
 564
 565         ret = st_scsi_execute(SRpnt, cmd, direction, NULL, bytes, timeout,
 566                               retries);
 567         if (ret) {
 568                 /* could not allocate the buffer or request was too large */
 569                 (STp->buffer)->syscall_result = (-EBUSY);
 570                 (STp->buffer)->last_SRpnt = NULL;
 571         } else if (do_wait) {
 572                 wait_for_completion(waiting);
 573                 SRpnt->waiting = NULL;
 574                 (STp->buffer)->syscall_result = st_chk_result(STp, SRpnt);
 575         }
 576
 577         return SRpnt;
 578 }
 579
 580 static int st_scsi_kern_execute(struct st_request *streq,
 581                                 const unsigned char *cmd, int data_direction,
 582                                 void *buffer, unsigned bufflen, int timeout,
 583                                 int retries)
 584 {
 585         struct scsi_tape *stp = streq->stp;
 586         int ret, resid;
 587
 588         stp->buffer->cmdstat.have_sense = 0;
 589         memcpy(streq->cmd, cmd, sizeof(streq->cmd));
 590
 591         ret = scsi_execute(stp->device, cmd, data_direction, buffer, bufflen,
 592                            streq->sense, timeout, retries, 0, &resid);
 593         if (driver_byte(ret) & DRIVER_ERROR)
 594                 return -EBUSY;
 595
 596         stp->buffer->cmdstat.midlevel_result = streq->result = ret;
 597         stp->buffer->cmdstat.residual = resid;
 598         stp->buffer->syscall_result = st_chk_result(stp, streq);
 599
 600         return 0;
 601 }
 602
 603 /* Handle the write-behind checking (waits for completion). Returns -ENOSPC if
 604    write has been correct but EOM early warning reached, -EIO if write ended in
 605    error or zero if write successful. Asynchronous writes are used only in
 606    variable block mode. */
 607 static int write_behind_check(struct scsi_tape * STp)
 608 {
 609         int retval = 0;
 610         struct st_buffer *STbuffer;
 611         struct st_partstat *STps;
 612         struct st_cmdstatus *cmdstatp;
 613         struct st_request *SRpnt;
 614
 615         STbuffer = STp->buffer;
 616         if (!STbuffer->writing)
 617                 return 0;
 618
 619         DEB(
 620         if (STp->write_pending)
 621                 STp->nbr_waits++;
 622         else
 623                 STp->nbr_finished++;
 624         ) /* end DEB */
 625
 626         wait_for_completion(&(STp->wait));
 627         SRpnt = STbuffer->last_SRpnt;
 628         STbuffer->last_SRpnt = NULL;
 629         SRpnt->waiting = NULL;
 630
 631         (STp->buffer)->syscall_result = st_chk_result(STp, SRpnt);
 632         st_release_request(SRpnt);
 633
 634         STbuffer->buffer_bytes -= STbuffer->writing;
 635         STps = &(STp->ps[STp->partition]);
 636         if (STps->drv_block >= 0) {
 637                 if (STp->block_size == 0)
 638                         STps->drv_block++;
 639                 else
 640                         STps->drv_block += STbuffer->writing / STp->block_size;
 641         }
 642
 643         cmdstatp = &STbuffer->cmdstat;
 644         if (STbuffer->syscall_result) {
 645                 retval = -EIO;
 646                 if (cmdstatp->have_sense && !cmdstatp->deferred &&
 647                     (cmdstatp->flags & SENSE_EOM) &&
 648                     (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
 649                      cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR)) {
 650                         /* EOM at write-behind, has all data been written? */
 651                         if (!cmdstatp->remainder_valid ||
 652                             cmdstatp->uremainder64 == 0)
 653                                 retval = -ENOSPC;
 654                 }
 655                 if (retval == -EIO)
 656                         STps->drv_block = -1;
 657         }
 658         STbuffer->writing = 0;
 659
 660         DEB(if (debugging && retval)
 661             printk(ST_DEB_MSG "%s: Async write error %x, return value %d.\n",
 662                    tape_name(STp), STbuffer->cmdstat.midlevel_result, retval);) /* end DEB */
 663
 664         return retval;
 665 }
 666
 667
 668 /* Step over EOF if it has been inadvertently crossed (ioctl not used because
 669    it messes up the block number). */
 670 static int cross_eof(struct scsi_tape * STp, int forward)
 671 {
 672         struct st_request *SRpnt;
 673         unsigned char cmd[MAX_COMMAND_SIZE];
 674         int ret;
 675
 676         cmd[0] = SPACE;
 677         cmd[1] = 0x01;          /* Space FileMarks */
 678         if (forward) {
 679                 cmd[2] = cmd[3] = 0;
 680                 cmd[4] = 1;
 681         } else
 682                 cmd[2] = cmd[3] = cmd[4] = 0xff;        /* -1 filemarks */
 683         cmd[5] = 0;
 684
 685         DEBC(printk(ST_DEB_MSG "%s: Stepping over filemark %s.\n",
 686                    tape_name(STp), forward ? "forward" : "backward"));
 687
 688         SRpnt = st_allocate_request(STp);
 689         if (!SRpnt)
 690                 return STp->buffer->syscall_result;
 691
 692         ret = st_scsi_kern_execute(SRpnt, cmd, DMA_NONE, NULL, 0,
 693                                    STp->device->request_queue->rq_timeout,
 694                                    MAX_RETRIES);
 695         if (ret)
 696                 goto out;
 697
 698         ret = STp->buffer->syscall_result;
 699
 700         if ((STp->buffer)->cmdstat.midlevel_result != 0)
 701                 printk(KERN_ERR "%s: Stepping over filemark %s failed.\n",
 702                    tape_name(STp), forward ? "forward" : "backward");
 703
 704 out:
 705         st_release_request(SRpnt);
 706
 707         return ret;
 708 }
 709
 710
 711 /* Flush the write buffer (never need to write if variable blocksize). */
 712 static int st_flush_write_buffer(struct scsi_tape * STp)
 713 {
 714         int transfer, blks;
 715         int result;
 716         unsigned char cmd[MAX_COMMAND_SIZE];
 717         struct st_request *SRpnt;
 718         struct st_partstat *STps;
 719
 720         result = write_behind_check(STp);
 721         if (result)
 722                 return result;
 723
 724         result = 0;
 725         if (STp->dirty == 1) {
 726
 727                 transfer = STp->buffer->buffer_bytes;
 728                 DEBC(printk(ST_DEB_MSG "%s: Flushing %d bytes.\n",
 729                                tape_name(STp), transfer));
 730
 731                 memset(cmd, 0, MAX_COMMAND_SIZE);
 732                 cmd[0] = WRITE_6;
 733                 cmd[1] = 1;
 734                 blks = transfer / STp->block_size;
 735                 cmd[2] = blks >> 16;
 736                 cmd[3] = blks >> 8;
 737                 cmd[4] = blks;
 738
 739                 SRpnt = st_do_scsi(NULL, STp, cmd, transfer, DMA_TO_DEVICE,
 740                                    STp->device->request_queue->rq_timeout,
 741                                    MAX_WRITE_RETRIES, 1);
 742                 if (!SRpnt)
 743                         return (STp->buffer)->syscall_result;
 744
 745                 STps = &(STp->ps[STp->partition]);
 746                 if ((STp->buffer)->syscall_result != 0) {
 747                         struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
 748
 749                         if (cmdstatp->have_sense && !cmdstatp->deferred &&
 750                             (cmdstatp->flags & SENSE_EOM) &&
 751                             (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
 752                              cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) &&
 753                             (!cmdstatp->remainder_valid ||
 754                              cmdstatp->uremainder64 == 0)) { /* All written at EOM early warning */
 755                                 STp->dirty = 0;
 756                                 (STp->buffer)->buffer_bytes = 0;
 757                                 if (STps->drv_block >= 0)
 758                                         STps->drv_block += blks;
 759                                 result = (-ENOSPC);
 760                         } else {
 761                                 printk(KERN_ERR "%s: Error on flush.\n",
 762                                        tape_name(STp));
 763                                 STps->drv_block = (-1);
 764                                 result = (-EIO);
 765                         }
 766                 } else {
 767                         if (STps->drv_block >= 0)
 768                                 STps->drv_block += blks;
 769                         STp->dirty = 0;
 770                         (STp->buffer)->buffer_bytes = 0;
 771                 }
 772                 st_release_request(SRpnt);
 773                 SRpnt = NULL;
 774         }
 775         return result;
 776 }
 777
 778
 779 /* Flush the tape buffer. The tape will be positioned correctly unless
 780    seek_next is true. */
 781 static int flush_buffer(struct scsi_tape *STp, int seek_next)
 782 {
 783         int backspace, result;
 784         struct st_buffer *STbuffer;
 785         struct st_partstat *STps;
 786
 787         STbuffer = STp->buffer;
 788
 789         /*
 790          * If there was a bus reset, block further access
 791          * to this device.
 792          */
 793         if (STp->pos_unknown)
 794                 return (-EIO);
 795
 796         if (STp->ready != ST_READY)
 797                 return 0;
 798         STps = &(STp->ps[STp->partition]);
 799         if (STps->rw == ST_WRITING)     /* Writing */
 800                 return st_flush_write_buffer(STp);
 801
 802         if (STp->block_size == 0)
 803                 return 0;
 804
 805         backspace = ((STp->buffer)->buffer_bytes +
 806                      (STp->buffer)->read_pointer) / STp->block_size -
 807             ((STp->buffer)->read_pointer + STp->block_size - 1) /
 808             STp->block_size;
 809         (STp->buffer)->buffer_bytes = 0;
 810         (STp->buffer)->read_pointer = 0;
 811         result = 0;
 812         if (!seek_next) {
 813                 if (STps->eof == ST_FM_HIT) {
 814                         result = cross_eof(STp, 0);     /* Back over the EOF hit */
 815                         if (!result)
 816                                 STps->eof = ST_NOEOF;
 817                         else {
 818                                 if (STps->drv_file >= 0)
 819                                         STps->drv_file++;
 820                                 STps->drv_block = 0;
 821                         }
 822                 }
 823                 if (!result && backspace > 0)
 824                         result = st_int_ioctl(STp, MTBSR, backspace);
 825         } else if (STps->eof == ST_FM_HIT) {
 826                 if (STps->drv_file >= 0)
 827                         STps->drv_file++;
 828                 STps->drv_block = 0;
 829                 STps->eof = ST_NOEOF;
 830         }
 831         return result;
 832
 833 }
 834 \f
 835 /* Set the mode parameters */
 836 static int set_mode_densblk(struct scsi_tape * STp, struct st_modedef * STm)
 837 {
 838         int set_it = 0;
 839         unsigned long arg;
 840         char *name = tape_name(STp);
 841
 842         if (!STp->density_changed &&
 843             STm->default_density >= 0 &&
 844             STm->default_density != STp->density) {
 845                 arg = STm->default_density;
 846                 set_it = 1;
 847         } else
 848                 arg = STp->density;
 849         arg <<= MT_ST_DENSITY_SHIFT;
 850         if (!STp->blksize_changed &&
 851             STm->default_blksize >= 0 &&
 852             STm->default_blksize != STp->block_size) {
 853                 arg |= STm->default_blksize;
 854                 set_it = 1;
 855         } else
 856                 arg |= STp->block_size;
 857         if (set_it &&
 858             st_int_ioctl(STp, SET_DENS_AND_BLK, arg)) {
 859                 printk(KERN_WARNING
 860                        "%s: Can't set default block size to %d bytes and density %x.\n",
 861                        name, STm->default_blksize, STm->default_density);
 862                 if (modes_defined)
 863                         return (-EINVAL);
 864         }
 865         return 0;
 866 }
 867
 868
 869 /* Lock or unlock the drive door. Don't use when st_request allocated. */
 870 static int do_door_lock(struct scsi_tape * STp, int do_lock)
 871 {
 872         int retval, cmd;
 873         DEB(char *name = tape_name(STp);)
 874
 875
 876         cmd = do_lock ? SCSI_IOCTL_DOORLOCK : SCSI_IOCTL_DOORUNLOCK;
 877         DEBC(printk(ST_DEB_MSG "%s: %socking drive door.\n", name,
 878                     do_lock ? "L" : "Unl"));
 879         retval = scsi_ioctl(STp->device, cmd, NULL);
 880         if (!retval) {
 881                 STp->door_locked = do_lock ? ST_LOCKED_EXPLICIT : ST_UNLOCKED;
 882         }
 883         else {
 884                 STp->door_locked = ST_LOCK_FAILS;
 885         }
 886         return retval;
 887 }
 888
 889
 890 /* Set the internal state after reset */
 891 static void reset_state(struct scsi_tape *STp)
 892 {
 893         int i;
 894         struct st_partstat *STps;
 895
 896         STp->pos_unknown = 0;
 897         for (i = 0; i < ST_NBR_PARTITIONS; i++) {
 898                 STps = &(STp->ps[i]);
 899                 STps->rw = ST_IDLE;
 900                 STps->eof = ST_NOEOF;
 901                 STps->at_sm = 0;
 902                 STps->last_block_valid = 0;
 903                 STps->drv_block = -1;
 904                 STps->drv_file = -1;
 905         }
 906         if (STp->can_partitions) {
 907                 STp->partition = find_partition(STp);
 908                 if (STp->partition < 0)
 909                         STp->partition = 0;
 910                 STp->new_partition = STp->partition;
 911         }
 912 }
 913 \f
 914 /* Test if the drive is ready. Returns either one of the codes below or a negative system
 915    error code. */
 916 #define CHKRES_READY       0
 917 #define CHKRES_NEW_SESSION 1
 918 #define CHKRES_NOT_READY   2
 919 #define CHKRES_NO_TAPE     3
 920
 921 #define MAX_ATTENTIONS    10
 922
 923 static int test_ready(struct scsi_tape *STp, int do_wait)
 924 {
 925         int attentions, waits, max_wait, scode;
 926         int retval = CHKRES_READY, new_session = 0;
 927         unsigned char cmd[MAX_COMMAND_SIZE];
 928         struct st_request *SRpnt;
 929         struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
 930
 931         SRpnt = st_allocate_request(STp);
 932         if (!SRpnt)
 933                 return STp->buffer->syscall_result;
 934
 935         max_wait = do_wait ? ST_BLOCK_SECONDS : 0;
 936
 937         for (attentions=waits=0; ; ) {
 938                 memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE);
 939                 cmd[0] = TEST_UNIT_READY;
 940
 941                 retval = st_scsi_kern_execute(SRpnt, cmd, DMA_NONE, NULL, 0,
 942                                               STp->long_timeout,
 943                                               MAX_READY_RETRIES);
 944                 if (retval)
 945                         break;
 946
 947                 if (cmdstatp->have_sense) {
 948
 949                         scode = cmdstatp->sense_hdr.sense_key;
 950
 951                         if (scode == UNIT_ATTENTION) { /* New media? */
 952                                 new_session = 1;
 953                                 if (attentions < MAX_ATTENTIONS) {
 954                                         attentions++;
 955                                         continue;
 956                                 }
 957                                 else {
 958                                         retval = (-EIO);
 959                                         break;
 960                                 }
 961                         }
 962
 963                         if (scode == NOT_READY) {
 964                                 if (waits < max_wait) {
 965                                         if (msleep_interruptible(1000)) {
 966                                                 retval = (-EINTR);
 967                                                 break;
 968                                         }
 969                                         waits++;
 970                                         continue;
 971                                 }
 972                                 else {
 973                                         if ((STp->device)->scsi_level >= SCSI_2 &&
 974                                             cmdstatp->sense_hdr.asc == 0x3a)    /* Check ASC */
 975                                                 retval = CHKRES_NO_TAPE;
 976                                         else
 977                                                 retval = CHKRES_NOT_READY;
 978                                         break;
 979                                 }
 980                         }
 981                 }
 982
 983                 retval = (STp->buffer)->syscall_result;
 984                 if (!retval)
 985                         retval = new_session ? CHKRES_NEW_SESSION : CHKRES_READY;
 986                 break;
 987         }
 988
 989         st_release_request(SRpnt);
 990
 991         return retval;
 992 }
 993
 994
 995 /* See if the drive is ready and gather information about the tape. Return values:
 996    < 0   negative error code from errno.h
 997    0     drive ready
 998    1     drive not ready (possibly no tape)
 999 */
1000 static int check_tape(struct scsi_tape *STp, struct file *filp)
1001 {
1002         int i, retval, new_session = 0, do_wait;
1003         unsigned char cmd[MAX_COMMAND_SIZE], saved_cleaning;
1004         unsigned short st_flags = filp->f_flags;
1005         struct st_request *SRpnt = NULL;
1006         struct st_modedef *STm;
1007         struct st_partstat *STps;
1008         char *name = tape_name(STp);
1009         struct inode *inode = filp->f_path.dentry->d_inode;
1010         int mode = TAPE_MODE(inode);
1011
1012         STp->ready = ST_READY;
1013
1014         if (mode != STp->current_mode) {
1015                 DEBC(printk(ST_DEB_MSG "%s: Mode change from %d to %d.\n",
1016                                name, STp->current_mode, mode));
1017                 new_session = 1;
1018                 STp->current_mode = mode;
1019         }
1020         STm = &(STp->modes[STp->current_mode]);
1021
1022         saved_cleaning = STp->cleaning_req;
1023         STp->cleaning_req = 0;
1024
1025         do_wait = ((filp->f_flags & O_NONBLOCK) == 0);
1026         retval = test_ready(STp, do_wait);
1027
1028         if (retval < 0)
1029             goto err_out;
1030
1031         if (retval == CHKRES_NEW_SESSION) {
1032                 STp->pos_unknown = 0;
1033                 STp->partition = STp->new_partition = 0;
1034                 if (STp->can_partitions)
1035                         STp->nbr_partitions = 1; /* This guess will be updated later
1036                                                     if necessary */
1037                 for (i = 0; i < ST_NBR_PARTITIONS; i++) {
1038                         STps = &(STp->ps[i]);
1039                         STps->rw = ST_IDLE;
1040                         STps->eof = ST_NOEOF;
1041                         STps->at_sm = 0;
1042                         STps->last_block_valid = 0;
1043                         STps->drv_block = 0;
1044                         STps->drv_file = 0;
1045                 }
1046                 new_session = 1;
1047         }
1048         else {
1049                 STp->cleaning_req |= saved_cleaning;
1050
1051                 if (retval == CHKRES_NOT_READY || retval == CHKRES_NO_TAPE) {
1052                         if (retval == CHKRES_NO_TAPE)
1053                                 STp->ready = ST_NO_TAPE;
1054                         else
1055                                 STp->ready = ST_NOT_READY;
1056
1057                         STp->density = 0;       /* Clear the erroneous "residue" */
1058                         STp->write_prot = 0;
1059                         STp->block_size = 0;
1060                         STp->ps[0].drv_file = STp->ps[0].drv_block = (-1);
1061                         STp->partition = STp->new_partition = 0;
1062                         STp->door_locked = ST_UNLOCKED;
1063                         return CHKRES_NOT_READY;
1064                 }
1065         }
1066
1067         SRpnt = st_allocate_request(STp);
1068         if (!SRpnt) {
1069                 retval = STp->buffer->syscall_result;
1070                 goto err_out;
1071         }
1072
1073         if (STp->omit_blklims)
1074                 STp->min_block = STp->max_block = (-1);
1075         else {
1076                 memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE);
1077                 cmd[0] = READ_BLOCK_LIMITS;
1078
1079                 retval = st_scsi_kern_execute(SRpnt, cmd, DMA_FROM_DEVICE,
1080                                               STp->buffer->b_data, 6,
1081                                               STp->device->request_queue->rq_timeout,
1082                                               MAX_READY_RETRIES);
1083                 if (retval) {
1084                         st_release_request(SRpnt);
1085                         goto err_out;
1086                 }
1087
1088                 if (!SRpnt->result && !STp->buffer->cmdstat.have_sense) {
1089                         STp->max_block = ((STp->buffer)->b_data[1] << 16) |
1090                             ((STp->buffer)->b_data[2] << 8) | (STp->buffer)->b_data[3];
1091                         STp->min_block = ((STp->buffer)->b_data[4] << 8) |
1092                             (STp->buffer)->b_data[5];
1093                         if ( DEB( debugging || ) !STp->inited)
1094                                 printk(KERN_INFO
1095                                        "%s: Block limits %d - %d bytes.\n", name,
1096                                        STp->min_block, STp->max_block);
1097                 } else {
1098                         STp->min_block = STp->max_block = (-1);
1099                         DEBC(printk(ST_DEB_MSG "%s: Can't read block limits.\n",
1100                                        name));
1101                 }
1102         }
1103
1104         memset((void *) &cmd[0], 0, MAX_COMMAND_SIZE);
1105         cmd[0] = MODE_SENSE;
1106         cmd[4] = 12;
1107
1108         retval = st_scsi_kern_execute(SRpnt, cmd, DMA_FROM_DEVICE,
1109                                       STp->buffer->b_data, 12,
1110                                       STp->device->request_queue->rq_timeout,
1111                                       MAX_READY_RETRIES);
1112         if (retval) {
1113                 st_release_request(SRpnt);
1114                 goto err_out;
1115         }
1116
1117         if ((STp->buffer)->syscall_result != 0) {
1118                 DEBC(printk(ST_DEB_MSG "%s: No Mode Sense.\n", name));
1119                 STp->block_size = ST_DEFAULT_BLOCK;     /* Educated guess (?) */
1120                 (STp->buffer)->syscall_result = 0;      /* Prevent error propagation */
1121                 STp->drv_write_prot = 0;
1122         } else {
1123                 DEBC(printk(ST_DEB_MSG
1124                             "%s: Mode sense. Length %d, medium %x, WBS %x, BLL %d\n",
1125                             name,
1126                             (STp->buffer)->b_data[0], (STp->buffer)->b_data[1],
1127                             (STp->buffer)->b_data[2], (STp->buffer)->b_data[3]));
1128
1129                 if ((STp->buffer)->b_data[3] >= 8) {
1130                         STp->drv_buffer = ((STp->buffer)->b_data[2] >> 4) & 7;
1131                         STp->density = (STp->buffer)->b_data[4];
1132                         STp->block_size = (STp->buffer)->b_data[9] * 65536 +
1133                             (STp->buffer)->b_data[10] * 256 + (STp->buffer)->b_data[11];
1134                         DEBC(printk(ST_DEB_MSG
1135                                     "%s: Density %x, tape length: %x, drv buffer: %d\n",
1136                                     name, STp->density, (STp->buffer)->b_data[5] * 65536 +
1137                                     (STp->buffer)->b_data[6] * 256 + (STp->buffer)->b_data[7],
1138                                     STp->drv_buffer));
1139                 }
1140                 STp->drv_write_prot = ((STp->buffer)->b_data[2] & 0x80) != 0;
1141         }
1142         st_release_request(SRpnt);
1143         SRpnt = NULL;
1144         STp->inited = 1;
1145
1146         if (STp->block_size > 0)
1147                 (STp->buffer)->buffer_blocks =
1148                         (STp->buffer)->buffer_size / STp->block_size;
1149         else
1150                 (STp->buffer)->buffer_blocks = 1;
1151         (STp->buffer)->buffer_bytes = (STp->buffer)->read_pointer = 0;
1152
1153         DEBC(printk(ST_DEB_MSG
1154                        "%s: Block size: %d, buffer size: %d (%d blocks).\n", name,
1155                        STp->block_size, (STp->buffer)->buffer_size,
1156                        (STp->buffer)->buffer_blocks));
1157
1158         if (STp->drv_write_prot) {
1159                 STp->write_prot = 1;
1160
1161                 DEBC(printk(ST_DEB_MSG "%s: Write protected\n", name));
1162
1163                 if (do_wait &&
1164                     ((st_flags & O_ACCMODE) == O_WRONLY ||
1165                      (st_flags & O_ACCMODE) == O_RDWR)) {
1166                         retval = (-EROFS);
1167                         goto err_out;
1168                 }
1169         }
1170
1171         if (STp->can_partitions && STp->nbr_partitions < 1) {
1172                 /* This code is reached when the device is opened for the first time
1173                    after the driver has been initialized with tape in the drive and the
1174                    partition support has been enabled. */
1175                 DEBC(printk(ST_DEB_MSG
1176                             "%s: Updating partition number in status.\n", name));
1177                 if ((STp->partition = find_partition(STp)) < 0) {
1178                         retval = STp->partition;
1179                         goto err_out;
1180                 }
1181                 STp->new_partition = STp->partition;
1182                 STp->nbr_partitions = 1; /* This guess will be updated when necessary */
1183         }
1184
1185         if (new_session) {      /* Change the drive parameters for the new mode */
1186                 STp->density_changed = STp->blksize_changed = 0;
1187                 STp->compression_changed = 0;
1188                 if (!(STm->defaults_for_writes) &&
1189                     (retval = set_mode_densblk(STp, STm)) < 0)
1190                     goto err_out;
1191
1192                 if (STp->default_drvbuffer != 0xff) {
1193                         if (st_int_ioctl(STp, MTSETDRVBUFFER, STp->default_drvbuffer))
1194                                 printk(KERN_WARNING
1195                                        "%s: Can't set default drive buffering to %d.\n",
1196                                        name, STp->default_drvbuffer);
1197                 }
1198         }
1199
1200         return CHKRES_READY;
1201
1202  err_out:
1203         return retval;
1204 }
1205
1206
1207 \f/* Open the device. Needs to take the BKL only because of incrementing the SCSI host
1208    module count. */
1209 static int st_open(struct inode *inode, struct file *filp)
1210 {
1211         int i, retval = (-EIO);
1212         struct scsi_tape *STp;
1213         struct st_partstat *STps;
1214         int dev = TAPE_NR(inode);
1215         char *name;
1216
1217         lock_kernel();
1218         /*
1219          * We really want to do nonseekable_open(inode, filp); here, but some
1220          * versions of tar incorrectly call lseek on tapes and bail out if that
1221          * fails.  So we disallow pread() and pwrite(), but permit lseeks.
1222          */
1223         filp->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE);
1224
1225         if (!(STp = scsi_tape_get(dev))) {
1226                 unlock_kernel();
1227                 return -ENXIO;
1228         }
1229
1230         write_lock(&st_dev_arr_lock);
1231         filp->private_data = STp;
1232         name = tape_name(STp);
1233
1234         if (STp->in_use) {
1235                 write_unlock(&st_dev_arr_lock);
1236                 scsi_tape_put(STp);
1237                 unlock_kernel();
1238                 DEB( printk(ST_DEB_MSG "%s: Device already in use.\n", name); )
1239                 return (-EBUSY);
1240         }
1241
1242         STp->in_use = 1;
1243         write_unlock(&st_dev_arr_lock);
1244         STp->rew_at_close = STp->autorew_dev = (iminor(inode) & 0x80) == 0;
1245
1246         if (!scsi_block_when_processing_errors(STp->device)) {
1247                 retval = (-ENXIO);
1248                 goto err_out;
1249         }
1250
1251         /* See that we have at least a one page buffer available */
1252         if (!enlarge_buffer(STp->buffer, PAGE_SIZE, STp->restr_dma)) {
1253                 printk(KERN_WARNING "%s: Can't allocate one page tape buffer.\n",
1254                        name);
1255                 retval = (-EOVERFLOW);
1256                 goto err_out;
1257         }
1258
1259         (STp->buffer)->cleared = 0;
1260         (STp->buffer)->writing = 0;
1261         (STp->buffer)->syscall_result = 0;
1262
1263         STp->write_prot = ((filp->f_flags & O_ACCMODE) == O_RDONLY);
1264
1265         STp->dirty = 0;
1266         for (i = 0; i < ST_NBR_PARTITIONS; i++) {
1267                 STps = &(STp->ps[i]);
1268                 STps->rw = ST_IDLE;
1269         }
1270         STp->try_dio_now = STp->try_dio;
1271         STp->recover_count = 0;
1272         DEB( STp->nbr_waits = STp->nbr_finished = 0;
1273              STp->nbr_requests = STp->nbr_dio = STp->nbr_pages = 0; )
1274
1275         retval = check_tape(STp, filp);
1276         if (retval < 0)
1277                 goto err_out;
1278         if ((filp->f_flags & O_NONBLOCK) == 0 &&
1279             retval != CHKRES_READY) {
1280                 if (STp->ready == NO_TAPE)
1281                         retval = (-ENOMEDIUM);
1282                 else
1283                         retval = (-EIO);
1284                 goto err_out;
1285         }
1286         unlock_kernel();
1287         return 0;
1288
1289  err_out:
1290         normalize_buffer(STp->buffer);
1291         STp->in_use = 0;
1292         scsi_tape_put(STp);
1293         unlock_kernel();
1294         return retval;
1295
1296 }
1297 \f
1298
1299 /* Flush the tape buffer before close */
1300 static int st_flush(struct file *filp, fl_owner_t id)
1301 {
1302         int result = 0, result2;
1303         unsigned char cmd[MAX_COMMAND_SIZE];
1304         struct st_request *SRpnt;
1305         struct scsi_tape *STp = filp->private_data;
1306         struct st_modedef *STm = &(STp->modes[STp->current_mode]);
1307         struct st_partstat *STps = &(STp->ps[STp->partition]);
1308         char *name = tape_name(STp);
1309
1310         if (file_count(filp) > 1)
1311                 return 0;
1312
1313         if (STps->rw == ST_WRITING && !STp->pos_unknown) {
1314                 result = st_flush_write_buffer(STp);
1315                 if (result != 0 && result != (-ENOSPC))
1316                         goto out;
1317         }
1318
1319         if (STp->can_partitions &&
1320             (result2 = switch_partition(STp)) < 0) {
1321                 DEBC(printk(ST_DEB_MSG
1322                                "%s: switch_partition at close failed.\n", name));
1323                 if (result == 0)
1324                         result = result2;
1325                 goto out;
1326         }
1327
1328         DEBC( if (STp->nbr_requests)
1329                 printk(KERN_DEBUG "%s: Number of r/w requests %d, dio used in %d, pages %d.\n",
1330                        name, STp->nbr_requests, STp->nbr_dio, STp->nbr_pages));
1331
1332         if (STps->rw == ST_WRITING && !STp->pos_unknown) {
1333                 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
1334
1335                 DEBC(printk(ST_DEB_MSG "%s: Async write waits %d, finished %d.\n",
1336                             name, STp->nbr_waits, STp->nbr_finished);
1337                 )
1338
1339                 memset(cmd, 0, MAX_COMMAND_SIZE);
1340                 cmd[0] = WRITE_FILEMARKS;
1341                 cmd[4] = 1 + STp->two_fm;
1342
1343                 SRpnt = st_allocate_request(STp);
1344                 if (!SRpnt) {
1345                         result = STp->buffer->syscall_result;
1346                         goto out;
1347                 }
1348
1349                 result = st_scsi_kern_execute(SRpnt, cmd, DMA_NONE, NULL, 0,
1350                                               STp->device->request_queue->rq_timeout,
1351                                               MAX_WRITE_RETRIES);
1352                 if (result) {
1353                         st_release_request(SRpnt);
1354                         goto out;
1355                 }
1356
1357                 if (STp->buffer->syscall_result == 0 ||
1358                     (cmdstatp->have_sense && !cmdstatp->deferred &&
1359                      (cmdstatp->flags & SENSE_EOM) &&
1360                      (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
1361                       cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) &&
1362                      (!cmdstatp->remainder_valid || cmdstatp->uremainder64 == 0))) {
1363                         /* Write successful at EOM */
1364                         st_release_request(SRpnt);
1365                         SRpnt = NULL;
1366                         if (STps->drv_file >= 0)
1367                                 STps->drv_file++;
1368                         STps->drv_block = 0;
1369                         if (STp->two_fm)
1370                                 cross_eof(STp, 0);
1371                         STps->eof = ST_FM;
1372                 }
1373                 else { /* Write error */
1374                         st_release_request(SRpnt);
1375                         SRpnt = NULL;
1376                         printk(KERN_ERR "%s: Error on write filemark.\n", name);
1377                         if (result == 0)
1378                                 result = (-EIO);
1379                 }
1380
1381                 DEBC(printk(ST_DEB_MSG "%s: Buffer flushed, %d EOF(s) written\n",
1382                             name, cmd[4]));
1383         } else if (!STp->rew_at_close) {
1384                 STps = &(STp->ps[STp->partition]);
1385                 if (!STm->sysv || STps->rw != ST_READING) {
1386                         if (STp->can_bsr)
1387                                 result = flush_buffer(STp, 0);
1388                         else if (STps->eof == ST_FM_HIT) {
1389                                 result = cross_eof(STp, 0);
1390                                 if (result) {
1391                                         if (STps->drv_file >= 0)
1392                                                 STps->drv_file++;
1393                                         STps->drv_block = 0;
1394                                         STps->eof = ST_FM;
1395                                 } else
1396                                         STps->eof = ST_NOEOF;
1397                         }
1398                 } else if ((STps->eof == ST_NOEOF &&
1399                             !(result = cross_eof(STp, 1))) ||
1400                            STps->eof == ST_FM_HIT) {
1401                         if (STps->drv_file >= 0)
1402                                 STps->drv_file++;
1403                         STps->drv_block = 0;
1404                         STps->eof = ST_FM;
1405                 }
1406         }
1407
1408       out:
1409         if (STp->rew_at_close) {
1410                 result2 = st_int_ioctl(STp, MTREW, 1);
1411                 if (result == 0)
1412                         result = result2;
1413         }
1414         return result;
1415 }
1416
1417
1418 /* Close the device and release it. BKL is not needed: this is the only thread
1419    accessing this tape. */
1420 static int st_release(struct inode *inode, struct file *filp)
1421 {
1422         int result = 0;
1423         struct scsi_tape *STp = filp->private_data;
1424
1425         if (STp->door_locked == ST_LOCKED_AUTO)
1426                 do_door_lock(STp, 0);
1427
1428         normalize_buffer(STp->buffer);
1429         write_lock(&st_dev_arr_lock);
1430         STp->in_use = 0;
1431         write_unlock(&st_dev_arr_lock);
1432         scsi_tape_put(STp);
1433
1434         return result;
1435 }
1436 \f
1437 /* The checks common to both reading and writing */
1438 static ssize_t rw_checks(struct scsi_tape *STp, struct file *filp, size_t count)
1439 {
1440         ssize_t retval = 0;
1441
1442         /*
1443          * If we are in the middle of error recovery, don't let anyone
1444          * else try and use this device.  Also, if error recovery fails, it
1445          * may try and take the device offline, in which case all further
1446          * access to the device is prohibited.
1447          */
1448         if (!scsi_block_when_processing_errors(STp->device)) {
1449                 retval = (-ENXIO);
1450                 goto out;
1451         }
1452
1453         if (STp->ready != ST_READY) {
1454                 if (STp->ready == ST_NO_TAPE)
1455                         retval = (-ENOMEDIUM);
1456                 else
1457                         retval = (-EIO);
1458                 goto out;
1459         }
1460
1461         if (! STp->modes[STp->current_mode].defined) {
1462                 retval = (-ENXIO);
1463                 goto out;
1464         }
1465
1466
1467         /*
1468          * If there was a bus reset, block further access
1469          * to this device.
1470          */
1471         if (STp->pos_unknown) {
1472                 retval = (-EIO);
1473                 goto out;
1474         }
1475
1476         if (count == 0)
1477                 goto out;
1478
1479         DEB(
1480         if (!STp->in_use) {
1481                 printk(ST_DEB_MSG "%s: Incorrect device.\n", tape_name(STp));
1482                 retval = (-EIO);
1483                 goto out;
1484         } ) /* end DEB */
1485
1486         if (STp->can_partitions &&
1487             (retval = switch_partition(STp)) < 0)
1488                 goto out;
1489
1490         if (STp->block_size == 0 && STp->max_block > 0 &&
1491             (count < STp->min_block || count > STp->max_block)) {
1492                 retval = (-EINVAL);
1493                 goto out;
1494         }
1495
1496         if (STp->do_auto_lock && STp->door_locked == ST_UNLOCKED &&
1497             !do_door_lock(STp, 1))
1498                 STp->door_locked = ST_LOCKED_AUTO;
1499
1500  out:
1501         return retval;
1502 }
1503
1504
1505 static int setup_buffering(struct scsi_tape *STp, const char __user *buf,
1506                            size_t count, int is_read)
1507 {
1508         int i, bufsize, retval = 0;
1509         struct st_buffer *STbp = STp->buffer;
1510
1511         if (is_read)
1512                 i = STp->try_dio_now && try_rdio;
1513         else
1514                 i = STp->try_dio_now && try_wdio;
1515
1516         if (i && ((unsigned long)buf & queue_dma_alignment(
1517                                         STp->device->request_queue)) == 0) {
1518                 i = sgl_map_user_pages(STbp, STbp->use_sg, (unsigned long)buf,
1519                                        count, (is_read ? READ : WRITE));
1520                 if (i > 0) {
1521                         STbp->do_dio = i;
1522                         STbp->buffer_bytes = 0;   /* can be used as transfer counter */
1523                 }
1524                 else
1525                         STbp->do_dio = 0;  /* fall back to buffering with any error */
1526                 STbp->sg_segs = STbp->do_dio;
1527                 STbp->frp_sg_current = 0;
1528                 DEB(
1529                      if (STbp->do_dio) {
1530                         STp->nbr_dio++;
1531                         STp->nbr_pages += STbp->do_dio;
1532                      }
1533                 )
1534         } else
1535                 STbp->do_dio = 0;
1536         DEB( STp->nbr_requests++; )
1537
1538         if (!STbp->do_dio) {
1539                 if (STp->block_size)
1540                         bufsize = STp->block_size > st_fixed_buffer_size ?
1541                                 STp->block_size : st_fixed_buffer_size;
1542                 else {
1543                         bufsize = count;
1544                         /* Make sure that data from previous user is not leaked even if
1545                            HBA does not return correct residual */
1546                         if (is_read && STp->sili && !STbp->cleared)
1547                                 clear_buffer(STbp);
1548                 }
1549
1550                 if (bufsize > STbp->buffer_size &&
1551                     !enlarge_buffer(STbp, bufsize, STp->restr_dma)) {
1552                         printk(KERN_WARNING "%s: Can't allocate %d byte tape buffer.\n",
1553                                tape_name(STp), bufsize);
1554                         retval = (-EOVERFLOW);
1555                         goto out;
1556                 }
1557                 if (STp->block_size)
1558                         STbp->buffer_blocks = bufsize / STp->block_size;
1559         }
1560
1561  out:
1562         return retval;
1563 }
1564
1565
1566 /* Can be called more than once after each setup_buffer() */
1567 static void release_buffering(struct scsi_tape *STp, int is_read)
1568 {
1569         struct st_buffer *STbp;
1570
1571         STbp = STp->buffer;
1572         if (STbp->do_dio) {
1573                 sgl_unmap_user_pages(STbp, STbp->do_dio, is_read);
1574                 STbp->do_dio = 0;
1575                 STbp->sg_segs = 0;
1576         }
1577 }
1578
1579
1580 /* Write command */
1581 static ssize_t
1582 st_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos)
1583 {
1584         ssize_t total;
1585         ssize_t i, do_count, blks, transfer;
1586         ssize_t retval;
1587         int undone, retry_eot = 0, scode;
1588         int async_write;
1589         unsigned char cmd[MAX_COMMAND_SIZE];
1590         const char __user *b_point;
1591         struct st_request *SRpnt = NULL;
1592         struct scsi_tape *STp = filp->private_data;
1593         struct st_modedef *STm;
1594         struct st_partstat *STps;
1595         struct st_buffer *STbp;
1596         char *name = tape_name(STp);
1597
1598         if (mutex_lock_interruptible(&STp->lock))
1599                 return -ERESTARTSYS;
1600
1601         retval = rw_checks(STp, filp, count);
1602         if (retval || count == 0)
1603                 goto out;
1604
1605         /* Write must be integral number of blocks */
1606         if (STp->block_size != 0 && (count % STp->block_size) != 0) {
1607                 printk(KERN_WARNING "%s: Write not multiple of tape block size.\n",
1608                        name);
1609                 retval = (-EINVAL);
1610                 goto out;
1611         }
1612
1613         STm = &(STp->modes[STp->current_mode]);
1614         STps = &(STp->ps[STp->partition]);
1615
1616         if (STp->write_prot) {
1617                 retval = (-EACCES);
1618                 goto out;
1619         }
1620
1621
1622         if (STps->rw == ST_READING) {
1623                 retval = flush_buffer(STp, 0);
1624                 if (retval)
1625                         goto out;
1626                 STps->rw = ST_WRITING;
1627         } else if (STps->rw != ST_WRITING &&
1628                    STps->drv_file == 0 && STps->drv_block == 0) {
1629                 if ((retval = set_mode_densblk(STp, STm)) < 0)
1630                         goto out;
1631                 if (STm->default_compression != ST_DONT_TOUCH &&
1632                     !(STp->compression_changed)) {
1633                         if (st_compression(STp, (STm->default_compression == ST_YES))) {
1634                                 printk(KERN_WARNING "%s: Can't set default compression.\n",
1635                                        name);
1636                                 if (modes_defined) {
1637                                         retval = (-EINVAL);
1638                                         goto out;
1639                                 }
1640                         }
1641                 }
1642         }
1643
1644         STbp = STp->buffer;
1645         i = write_behind_check(STp);
1646         if (i) {
1647                 if (i == -ENOSPC)
1648                         STps->eof = ST_EOM_OK;
1649                 else
1650                         STps->eof = ST_EOM_ERROR;
1651         }
1652
1653         if (STps->eof == ST_EOM_OK) {
1654                 STps->eof = ST_EOD_1;  /* allow next write */
1655                 retval = (-ENOSPC);
1656                 goto out;
1657         }
1658         else if (STps->eof == ST_EOM_ERROR) {
1659                 retval = (-EIO);
1660                 goto out;
1661         }
1662
1663         /* Check the buffer readability in cases where copy_user might catch
1664            the problems after some tape movement. */
1665         if (STp->block_size != 0 &&
1666             !STbp->do_dio &&
1667             (copy_from_user(&i, buf, 1) != 0 ||
1668              copy_from_user(&i, buf + count - 1, 1) != 0)) {
1669                 retval = (-EFAULT);
1670                 goto out;
1671         }
1672
1673         retval = setup_buffering(STp, buf, count, 0);
1674         if (retval)
1675                 goto out;
1676
1677         total = count;
1678
1679         memset(cmd, 0, MAX_COMMAND_SIZE);
1680         cmd[0] = WRITE_6;
1681         cmd[1] = (STp->block_size != 0);
1682
1683         STps->rw = ST_WRITING;
1684
1685         b_point = buf;
1686         while (count > 0 && !retry_eot) {
1687
1688                 if (STbp->do_dio) {
1689                         do_count = count;
1690                 }
1691                 else {
1692                         if (STp->block_size == 0)
1693                                 do_count = count;
1694                         else {
1695                                 do_count = STbp->buffer_blocks * STp->block_size -
1696                                         STbp->buffer_bytes;
1697                                 if (do_count > count)
1698                                         do_count = count;
1699                         }
1700
1701                         i = append_to_buffer(b_point, STbp, do_count);
1702                         if (i) {
1703                                 retval = i;
1704                                 goto out;
1705                         }
1706                 }
1707                 count -= do_count;
1708                 b_point += do_count;
1709
1710                 async_write = STp->block_size == 0 && !STbp->do_dio &&
1711                         STm->do_async_writes && STps->eof < ST_EOM_OK;
1712
1713                 if (STp->block_size != 0 && STm->do_buffer_writes &&
1714                     !(STp->try_dio_now && try_wdio) && STps->eof < ST_EOM_OK &&
1715                     STbp->buffer_bytes < STbp->buffer_size) {
1716                         STp->dirty = 1;
1717                         /* Don't write a buffer that is not full enough. */
1718                         if (!async_write && count == 0)
1719                                 break;
1720                 }
1721
1722         retry_write:
1723                 if (STp->block_size == 0)
1724                         blks = transfer = do_count;
1725                 else {
1726                         if (!STbp->do_dio)
1727                                 blks = STbp->buffer_bytes;
1728                         else
1729                                 blks = do_count;
1730                         blks /= STp->block_size;
1731                         transfer = blks * STp->block_size;
1732                 }
1733                 cmd[2] = blks >> 16;
1734                 cmd[3] = blks >> 8;
1735                 cmd[4] = blks;
1736
1737                 SRpnt = st_do_scsi(SRpnt, STp, cmd, transfer, DMA_TO_DEVICE,
1738                                    STp->device->request_queue->rq_timeout,
1739                                    MAX_WRITE_RETRIES, !async_write);
1740                 if (!SRpnt) {
1741                         retval = STbp->syscall_result;
1742                         goto out;
1743                 }
1744                 if (async_write && !STbp->syscall_result) {
1745                         STbp->writing = transfer;
1746                         STp->dirty = !(STbp->writing ==
1747                                        STbp->buffer_bytes);
1748                         SRpnt = NULL;  /* Prevent releasing this request! */
1749                         DEB( STp->write_pending = 1; )
1750                         break;
1751                 }
1752
1753                 if (STbp->syscall_result != 0) {
1754                         struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
1755
1756                         DEBC(printk(ST_DEB_MSG "%s: Error on write:\n", name));
1757                         if (cmdstatp->have_sense && (cmdstatp->flags & SENSE_EOM)) {
1758                                 scode = cmdstatp->sense_hdr.sense_key;
1759                                 if (cmdstatp->remainder_valid)
1760                                         undone = (int)cmdstatp->uremainder64;
1761                                 else if (STp->block_size == 0 &&
1762                                          scode == VOLUME_OVERFLOW)
1763                                         undone = transfer;
1764                                 else
1765                                         undone = 0;
1766                                 if (STp->block_size != 0)
1767                                         undone *= STp->block_size;
1768                                 if (undone <= do_count) {
1769                                         /* Only data from this write is not written */
1770                                         count += undone;
1771                                         b_point -= undone;
1772                                         do_count -= undone;
1773                                         if (STp->block_size)
1774                                                 blks = (transfer - undone) / STp->block_size;
1775                                         STps->eof = ST_EOM_OK;
1776                                         /* Continue in fixed block mode if all written
1777                                            in this request but still something left to write
1778                                            (retval left to zero)
1779                                         */
1780                                         if (STp->block_size == 0 ||
1781                                             undone > 0 || count == 0)
1782                                                 retval = (-ENOSPC); /* EOM within current request */
1783                                         DEBC(printk(ST_DEB_MSG
1784                                                        "%s: EOM with %d bytes unwritten.\n",
1785                                                        name, (int)count));
1786                                 } else {
1787                                         /* EOT within data buffered earlier (possible only
1788                                            in fixed block mode without direct i/o) */
1789                                         if (!retry_eot && !cmdstatp->deferred &&
1790                                             (scode == NO_SENSE || scode == RECOVERED_ERROR)) {
1791                                                 move_buffer_data(STp->buffer, transfer - undone);
1792                                                 retry_eot = 1;
1793                                                 if (STps->drv_block >= 0) {
1794                                                         STps->drv_block += (transfer - undone) /
1795                                                                 STp->block_size;
1796                                                 }
1797                                                 STps->eof = ST_EOM_OK;
1798                                                 DEBC(printk(ST_DEB_MSG
1799                                                             "%s: Retry write of %d bytes at EOM.\n",
1800                                                             name, STp->buffer->buffer_bytes));
1801                                                 goto retry_write;
1802                                         }
1803                                         else {
1804                                                 /* Either error within data buffered by driver or
1805                                                    failed retry */
1806                                                 count -= do_count;
1807                                                 blks = do_count = 0;
1808                                                 STps->eof = ST_EOM_ERROR;
1809                                                 STps->drv_block = (-1); /* Too cautious? */
1810                                                 retval = (-EIO);        /* EOM for old data */
1811                                                 DEBC(printk(ST_DEB_MSG
1812                                                             "%s: EOM with lost data.\n",
1813                                                             name));
1814                                         }
1815                                 }
1816                         } else {
1817                                 count += do_count;
1818                                 STps->drv_block = (-1);         /* Too cautious? */
1819                                 retval = STbp->syscall_result;
1820                         }
1821
1822                 }
1823
1824                 if (STps->drv_block >= 0) {
1825                         if (STp->block_size == 0)
1826                                 STps->drv_block += (do_count > 0);
1827                         else
1828                                 STps->drv_block += blks;
1829                 }
1830
1831                 STbp->buffer_bytes = 0;
1832                 STp->dirty = 0;
1833
1834                 if (retval || retry_eot) {
1835                         if (count < total)
1836                                 retval = total - count;
1837                         goto out;
1838                 }
1839         }
1840
1841         if (STps->eof == ST_EOD_1)
1842                 STps->eof = ST_EOM_OK;
1843         else if (STps->eof != ST_EOM_OK)
1844                 STps->eof = ST_NOEOF;
1845         retval = total - count;
1846
1847  out:
1848         if (SRpnt != NULL)
1849                 st_release_request(SRpnt);
1850         release_buffering(STp, 0);
1851         mutex_unlock(&STp->lock);
1852
1853         return retval;
1854 }
1855 \f
1856 /* Read data from the tape. Returns zero in the normal case, one if the
1857    eof status has changed, and the negative error code in case of a
1858    fatal error. Otherwise updates the buffer and the eof state.
1859
1860    Does release user buffer mapping if it is set.
1861 */
1862 static long read_tape(struct scsi_tape *STp, long count,
1863                       struct st_request ** aSRpnt)
1864 {
1865         int transfer, blks, bytes;
1866         unsigned char cmd[MAX_COMMAND_SIZE];
1867         struct st_request *SRpnt;
1868         struct st_modedef *STm;
1869         struct st_partstat *STps;
1870         struct st_buffer *STbp;
1871         int retval = 0;
1872         char *name = tape_name(STp);
1873
1874         if (count == 0)
1875                 return 0;
1876
1877         STm = &(STp->modes[STp->current_mode]);
1878         STps = &(STp->ps[STp->partition]);
1879         if (STps->eof == ST_FM_HIT)
1880                 return 1;
1881         STbp = STp->buffer;
1882
1883         if (STp->block_size == 0)
1884                 blks = bytes = count;
1885         else {
1886                 if (!(STp->try_dio_now && try_rdio) && STm->do_read_ahead) {
1887                         blks = (STp->buffer)->buffer_blocks;
1888                         bytes = blks * STp->block_size;
1889                 } else {
1890                         bytes = count;
1891                         if (!STbp->do_dio && bytes > (STp->buffer)->buffer_size)
1892                                 bytes = (STp->buffer)->buffer_size;
1893                         blks = bytes / STp->block_size;
1894                         bytes = blks * STp->block_size;
1895                 }
1896         }
1897
1898         memset(cmd, 0, MAX_COMMAND_SIZE);
1899         cmd[0] = READ_6;
1900         cmd[1] = (STp->block_size != 0);
1901         if (!cmd[1] && STp->sili)
1902                 cmd[1] |= 2;
1903         cmd[2] = blks >> 16;
1904         cmd[3] = blks >> 8;
1905         cmd[4] = blks;
1906
1907         SRpnt = *aSRpnt;
1908         SRpnt = st_do_scsi(SRpnt, STp, cmd, bytes, DMA_FROM_DEVICE,
1909                            STp->device->request_queue->rq_timeout,
1910                            MAX_RETRIES, 1);
1911         release_buffering(STp, 1);
1912         *aSRpnt = SRpnt;
1913         if (!SRpnt)
1914                 return STbp->syscall_result;
1915
1916         STbp->read_pointer = 0;
1917         STps->at_sm = 0;
1918
1919         /* Something to check */
1920         if (STbp->syscall_result) {
1921                 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
1922
1923                 retval = 1;
1924                 DEBC(printk(ST_DEB_MSG "%s: Sense: %2x %2x %2x %2x %2x %2x %2x %2x\n",
1925                             name,
1926                             SRpnt->sense[0], SRpnt->sense[1],
1927                             SRpnt->sense[2], SRpnt->sense[3],
1928                             SRpnt->sense[4], SRpnt->sense[5],
1929                             SRpnt->sense[6], SRpnt->sense[7]));
1930                 if (cmdstatp->have_sense) {
1931
1932                         if (cmdstatp->sense_hdr.sense_key == BLANK_CHECK)
1933                                 cmdstatp->flags &= 0xcf;        /* No need for EOM in this case */
1934
1935                         if (cmdstatp->flags != 0) { /* EOF, EOM, or ILI */
1936                                 /* Compute the residual count */
1937                                 if (cmdstatp->remainder_valid)
1938                                         transfer = (int)cmdstatp->uremainder64;
1939                                 else
1940                                         transfer = 0;
1941                                 if (STp->block_size == 0 &&
1942                                     cmdstatp->sense_hdr.sense_key == MEDIUM_ERROR)
1943                                         transfer = bytes;
1944
1945                                 if (cmdstatp->flags & SENSE_ILI) {      /* ILI */
1946                                         if (STp->block_size == 0) {
1947                                                 if (transfer <= 0) {
1948                                                         if (transfer < 0)
1949                                                                 printk(KERN_NOTICE
1950                                                                        "%s: Failed to read %d byte block with %d byte transfer.\n",
1951                                                                        name, bytes - transfer, bytes);
1952                                                         if (STps->drv_block >= 0)
1953                                                                 STps->drv_block += 1;
1954                                                         STbp->buffer_bytes = 0;
1955                                                         return (-ENOMEM);
1956                                                 }
1957                                                 STbp->buffer_bytes = bytes - transfer;
1958                                         } else {
1959                                                 st_release_request(SRpnt);
1960                                                 SRpnt = *aSRpnt = NULL;
1961                                                 if (transfer == blks) { /* We did not get anything, error */
1962                                                         printk(KERN_NOTICE "%s: Incorrect block size.\n", name);
1963                                                         if (STps->drv_block >= 0)
1964                                                                 STps->drv_block += blks - transfer + 1;
1965                                                         st_int_ioctl(STp, MTBSR, 1);
1966                                                         return (-EIO);
1967                                                 }
1968                                                 /* We have some data, deliver it */
1969                                                 STbp->buffer_bytes = (blks - transfer) *
1970                                                     STp->block_size;
1971                                                 DEBC(printk(ST_DEB_MSG
1972                                                             "%s: ILI but enough data received %ld %d.\n",
1973                                                             name, count, STbp->buffer_bytes));
1974                                                 if (STps->drv_block >= 0)
1975                                                         STps->drv_block += 1;
1976                                                 if (st_int_ioctl(STp, MTBSR, 1))
1977                                                         return (-EIO);
1978                                         }
1979                                 } else if (cmdstatp->flags & SENSE_FMK) {       /* FM overrides EOM */
1980                                         if (STps->eof != ST_FM_HIT)
1981                                                 STps->eof = ST_FM_HIT;
1982                                         else
1983                                                 STps->eof = ST_EOD_2;
1984                                         if (STp->block_size == 0)
1985                                                 STbp->buffer_bytes = 0;
1986                                         else
1987                                                 STbp->buffer_bytes =
1988                                                     bytes - transfer * STp->block_size;
1989                                         DEBC(printk(ST_DEB_MSG
1990                                                     "%s: EOF detected (%d bytes read).\n",
1991                                                     name, STbp->buffer_bytes));
1992                                 } else if (cmdstatp->flags & SENSE_EOM) {
1993                                         if (STps->eof == ST_FM)
1994                                                 STps->eof = ST_EOD_1;
1995                                         else
1996                                                 STps->eof = ST_EOM_OK;
1997                                         if (STp->block_size == 0)
1998                                                 STbp->buffer_bytes = bytes - transfer;
1999                                         else
2000                                                 STbp->buffer_bytes =
2001                                                     bytes - transfer * STp->block_size;
2002
2003                                         DEBC(printk(ST_DEB_MSG "%s: EOM detected (%d bytes read).\n",
2004                                                     name, STbp->buffer_bytes));
2005                                 }
2006                         }
2007                         /* end of EOF, EOM, ILI test */
2008                         else {  /* nonzero sense key */
2009                                 DEBC(printk(ST_DEB_MSG
2010                                             "%s: Tape error while reading.\n", name));
2011                                 STps->drv_block = (-1);
2012                                 if (STps->eof == ST_FM &&
2013                                     cmdstatp->sense_hdr.sense_key == BLANK_CHECK) {
2014                                         DEBC(printk(ST_DEB_MSG
2015                                                     "%s: Zero returned for first BLANK CHECK after EOF.\n",
2016                                                     name));
2017                                         STps->eof = ST_EOD_2;   /* First BLANK_CHECK after FM */
2018                                 } else  /* Some other extended sense code */
2019                                         retval = (-EIO);
2020                         }
2021
2022                         if (STbp->buffer_bytes < 0)  /* Caused by bogus sense data */
2023                                 STbp->buffer_bytes = 0;
2024                 }
2025                 /* End of extended sense test */
2026                 else {          /* Non-extended sense */
2027                         retval = STbp->syscall_result;
2028                 }
2029
2030         }
2031         /* End of error handling */
2032         else {                  /* Read successful */
2033                 STbp->buffer_bytes = bytes;
2034                 if (STp->sili) /* In fixed block mode residual is always zero here */
2035                         STbp->buffer_bytes -= STp->buffer->cmdstat.residual;
2036         }
2037
2038         if (STps->drv_block >= 0) {
2039                 if (STp->block_size == 0)
2040                         STps->drv_block++;
2041                 else
2042                         STps->drv_block += STbp->buffer_bytes / STp->block_size;
2043         }
2044         return retval;
2045 }
2046 \f
2047
2048 /* Read command */
2049 static ssize_t
2050 st_read(struct file *filp, char __user *buf, size_t count, loff_t * ppos)
2051 {
2052         ssize_t total;
2053         ssize_t retval = 0;
2054         ssize_t i, transfer;
2055         int special, do_dio = 0;
2056         struct st_request *SRpnt = NULL;
2057         struct scsi_tape *STp = filp->private_data;
2058         struct st_modedef *STm;
2059         struct st_partstat *STps;
2060         struct st_buffer *STbp = STp->buffer;
2061         DEB( char *name = tape_name(STp); )
2062
2063         if (mutex_lock_interruptible(&STp->lock))
2064                 return -ERESTARTSYS;
2065
2066         retval = rw_checks(STp, filp, count);
2067         if (retval || count == 0)
2068                 goto out;
2069
2070         STm = &(STp->modes[STp->current_mode]);
2071         if (STp->block_size != 0 && (count % STp->block_size) != 0) {
2072                 if (!STm->do_read_ahead) {
2073                         retval = (-EINVAL);     /* Read must be integral number of blocks */
2074                         goto out;
2075                 }
2076                 STp->try_dio_now = 0;  /* Direct i/o can't handle split blocks */
2077         }
2078
2079         STps = &(STp->ps[STp->partition]);
2080         if (STps->rw == ST_WRITING) {
2081                 retval = flush_buffer(STp, 0);
2082                 if (retval)
2083                         goto out;
2084                 STps->rw = ST_READING;
2085         }
2086         DEB(
2087         if (debugging && STps->eof != ST_NOEOF)
2088                 printk(ST_DEB_MSG "%s: EOF/EOM flag up (%d). Bytes %d\n", name,
2089                        STps->eof, STbp->buffer_bytes);
2090         ) /* end DEB */
2091
2092         retval = setup_buffering(STp, buf, count, 1);
2093         if (retval)
2094                 goto out;
2095         do_dio = STbp->do_dio;
2096
2097         if (STbp->buffer_bytes == 0 &&
2098             STps->eof >= ST_EOD_1) {
2099                 if (STps->eof < ST_EOD) {
2100                         STps->eof += 1;
2101                         retval = 0;
2102                         goto out;
2103                 }
2104                 retval = (-EIO);        /* EOM or Blank Check */
2105                 goto out;
2106         }
2107
2108         if (do_dio) {
2109                 /* Check the buffer writability before any tape movement. Don't alter
2110                    buffer data. */
2111                 if (copy_from_user(&i, buf, 1) != 0 ||
2112                     copy_to_user(buf, &i, 1) != 0 ||
2113                     copy_from_user(&i, buf + count - 1, 1) != 0 ||
2114                     copy_to_user(buf + count - 1, &i, 1) != 0) {
2115                         retval = (-EFAULT);
2116                         goto out;
2117                 }
2118         }
2119
2120         STps->rw = ST_READING;
2121
2122
2123         /* Loop until enough data in buffer or a special condition found */
2124         for (total = 0, special = 0; total < count && !special;) {
2125
2126                 /* Get new data if the buffer is empty */
2127                 if (STbp->buffer_bytes == 0) {
2128                         special = read_tape(STp, count - total, &SRpnt);
2129                         if (special < 0) {      /* No need to continue read */
2130                                 retval = special;
2131                                 goto out;
2132                         }
2133                 }
2134
2135                 /* Move the data from driver buffer to user buffer */
2136                 if (STbp->buffer_bytes > 0) {
2137                         DEB(
2138                         if (debugging && STps->eof != ST_NOEOF)
2139                                 printk(ST_DEB_MSG
2140                                        "%s: EOF up (%d). Left %d, needed %d.\n", name,
2141                                        STps->eof, STbp->buffer_bytes,
2142                                        (int)(count - total));
2143                         ) /* end DEB */
2144                         transfer = STbp->buffer_bytes < count - total ?
2145                             STbp->buffer_bytes : count - total;
2146                         if (!do_dio) {
2147                                 i = from_buffer(STbp, buf, transfer);
2148                                 if (i) {
2149                                         retval = i;
2150                                         goto out;
2151                                 }
2152                         }
2153                         buf += transfer;
2154                         total += transfer;
2155                 }
2156
2157                 if (STp->block_size == 0)
2158                         break;  /* Read only one variable length block */
2159
2160         }                       /* for (total = 0, special = 0;
2161                                    total < count && !special; ) */
2162
2163         /* Change the eof state if no data from tape or buffer */
2164         if (total == 0) {
2165                 if (STps->eof == ST_FM_HIT) {
2166                         STps->eof = ST_FM;
2167                         STps->drv_block = 0;
2168                         if (STps->drv_file >= 0)
2169                                 STps->drv_file++;
2170                 } else if (STps->eof == ST_EOD_1) {
2171                         STps->eof = ST_EOD_2;
2172                         STps->drv_block = 0;
2173                         if (STps->drv_file >= 0)
2174                                 STps->drv_file++;
2175                 } else if (STps->eof == ST_EOD_2)
2176                         STps->eof = ST_EOD;
2177         } else if (STps->eof == ST_FM)
2178                 STps->eof = ST_NOEOF;
2179         retval = total;
2180
2181  out:
2182         if (SRpnt != NULL) {
2183                 st_release_request(SRpnt);
2184                 SRpnt = NULL;
2185         }
2186         if (do_dio) {
2187                 release_buffering(STp, 1);
2188                 STbp->buffer_bytes = 0;
2189         }
2190         mutex_unlock(&STp->lock);
2191
2192         return retval;
2193 }
2194 \f
2195
2196
2197 DEB(
2198 /* Set the driver options */
2199 static void st_log_options(struct scsi_tape * STp, struct st_modedef * STm, char *name)
2200 {
2201         if (debugging) {
2202                 printk(KERN_INFO
2203                        "%s: Mode %d options: buffer writes: %d, async writes: %d, read ahead: %d\n",
2204                        name, STp->current_mode, STm->do_buffer_writes, STm->do_async_writes,
2205                        STm->do_read_ahead);
2206                 printk(KERN_INFO
2207                        "%s:    can bsr: %d, two FMs: %d, fast mteom: %d, auto lock: %d,\n",
2208                        name, STp->can_bsr, STp->two_fm, STp->fast_mteom, STp->do_auto_lock);
2209                 printk(KERN_INFO
2210                        "%s:    defs for wr: %d, no block limits: %d, partitions: %d, s2 log: %d\n",
2211                        name, STm->defaults_for_writes, STp->omit_blklims, STp->can_partitions,
2212                        STp->scsi2_logical);
2213                 printk(KERN_INFO
2214                        "%s:    sysv: %d nowait: %d sili: %d\n", name, STm->sysv, STp->immediate,
2215                         STp->sili);
2216                 printk(KERN_INFO "%s:    debugging: %d\n",
2217                        name, debugging);
2218         }
2219 }
2220         )
2221
2222
2223 static int st_set_options(struct scsi_tape *STp, long options)
2224 {
2225         int value;
2226         long code;
2227         struct st_modedef *STm;
2228         char *name = tape_name(STp);
2229         struct cdev *cd0, *cd1;
2230
2231         STm = &(STp->modes[STp->current_mode]);
2232         if (!STm->defined) {
2233                 cd0 = STm->cdevs[0]; cd1 = STm->cdevs[1];
2234                 memcpy(STm, &(STp->modes[0]), sizeof(struct st_modedef));
2235                 STm->cdevs[0] = cd0; STm->cdevs[1] = cd1;
2236                 modes_defined = 1;
2237                 DEBC(printk(ST_DEB_MSG
2238                             "%s: Initialized mode %d definition from mode 0\n",
2239                             name, STp->current_mode));
2240         }
2241
2242         code = options & MT_ST_OPTIONS;
2243         if (code == MT_ST_BOOLEANS) {
2244                 STm->do_buffer_writes = (options & MT_ST_BUFFER_WRITES) != 0;
2245                 STm->do_async_writes = (options & MT_ST_ASYNC_WRITES) != 0;
2246                 STm->defaults_for_writes = (options & MT_ST_DEF_WRITES) != 0;
2247                 STm->do_read_ahead = (options & MT_ST_READ_AHEAD) != 0;
2248                 STp->two_fm = (options & MT_ST_TWO_FM) != 0;
2249                 STp->fast_mteom = (options & MT_ST_FAST_MTEOM) != 0;
2250                 STp->do_auto_lock = (options & MT_ST_AUTO_LOCK) != 0;
2251                 STp->can_bsr = (options & MT_ST_CAN_BSR) != 0;
2252                 STp->omit_blklims = (options & MT_ST_NO_BLKLIMS) != 0;
2253                 if ((STp->device)->scsi_level >= SCSI_2)
2254                         STp->can_partitions = (options & MT_ST_CAN_PARTITIONS) != 0;
2255                 STp->scsi2_logical = (options & MT_ST_SCSI2LOGICAL) != 0;
2256                 STp->immediate = (options & MT_ST_NOWAIT) != 0;
2257                 STm->sysv = (options & MT_ST_SYSV) != 0;
2258                 STp->sili = (options & MT_ST_SILI) != 0;
2259                 DEB( debugging = (options & MT_ST_DEBUGGING) != 0;
2260                      st_log_options(STp, STm, name); )
2261         } else if (code == MT_ST_SETBOOLEANS || code == MT_ST_CLEARBOOLEANS) {
2262                 value = (code == MT_ST_SETBOOLEANS);
2263                 if ((options & MT_ST_BUFFER_WRITES) != 0)
2264                         STm->do_buffer_writes = value;
2265                 if ((options & MT_ST_ASYNC_WRITES) != 0)
2266                         STm->do_async_writes = value;
2267                 if ((options & MT_ST_DEF_WRITES) != 0)
2268                         STm->defaults_for_writes = value;
2269                 if ((options & MT_ST_READ_AHEAD) != 0)
2270                         STm->do_read_ahead = value;
2271                 if ((options & MT_ST_TWO_FM) != 0)
2272                         STp->two_fm = value;
2273                 if ((options & MT_ST_FAST_MTEOM) != 0)
2274                         STp->fast_mteom = value;
2275                 if ((options & MT_ST_AUTO_LOCK) != 0)
2276                         STp->do_auto_lock = value;
2277                 if ((options & MT_ST_CAN_BSR) != 0)
2278                         STp->can_bsr = value;
2279                 if ((options & MT_ST_NO_BLKLIMS) != 0)
2280                         STp->omit_blklims = value;
2281                 if ((STp->device)->scsi_level >= SCSI_2 &&
2282                     (options & MT_ST_CAN_PARTITIONS) != 0)
2283                         STp->can_partitions = value;
2284                 if ((options & MT_ST_SCSI2LOGICAL) != 0)
2285                         STp->scsi2_logical = value;
2286                 if ((options & MT_ST_NOWAIT) != 0)
2287                         STp->immediate = value;
2288                 if ((options & MT_ST_SYSV) != 0)
2289                         STm->sysv = value;
2290                 if ((options & MT_ST_SILI) != 0)
2291                         STp->sili = value;
2292                 DEB(
2293                 if ((options & MT_ST_DEBUGGING) != 0)
2294                         debugging = value;
2295                         st_log_options(STp, STm, name); )
2296         } else if (code == MT_ST_WRITE_THRESHOLD) {
2297                 /* Retained for compatibility */
2298         } else if (code == MT_ST_DEF_BLKSIZE) {
2299                 value = (options & ~MT_ST_OPTIONS);
2300                 if (value == ~MT_ST_OPTIONS) {
2301                         STm->default_blksize = (-1);
2302                         DEBC( printk(KERN_INFO "%s: Default block size disabled.\n", name));
2303                 } else {
2304                         STm->default_blksize = value;
2305                         DEBC( printk(KERN_INFO "%s: Default block size set to %d bytes.\n",
2306                                name, STm->default_blksize));
2307                         if (STp->ready == ST_READY) {
2308                                 STp->blksize_changed = 0;
2309                                 set_mode_densblk(STp, STm);
2310                         }
2311                 }
2312         } else if (code == MT_ST_TIMEOUTS) {
2313                 value = (options & ~MT_ST_OPTIONS);
2314                 if ((value & MT_ST_SET_LONG_TIMEOUT) != 0) {
2315                         STp->long_timeout = (value & ~MT_ST_SET_LONG_TIMEOUT) * HZ;
2316                         DEBC( printk(KERN_INFO "%s: Long timeout set to %d seconds.\n", name,
2317                                (value & ~MT_ST_SET_LONG_TIMEOUT)));
2318                 } else {
2319                         blk_queue_rq_timeout(STp->device->request_queue,
2320                                              value * HZ);
2321                         DEBC( printk(KERN_INFO "%s: Normal timeout set to %d seconds.\n",
2322                                 name, value) );
2323                 }
2324         } else if (code == MT_ST_SET_CLN) {
2325                 value = (options & ~MT_ST_OPTIONS) & 0xff;
2326                 if (value != 0 &&
2327                     value < EXTENDED_SENSE_START && value >= SCSI_SENSE_BUFFERSIZE)
2328                         return (-EINVAL);
2329                 STp->cln_mode = value;
2330                 STp->cln_sense_mask = (options >> 8) & 0xff;
2331                 STp->cln_sense_value = (options >> 16) & 0xff;
2332                 printk(KERN_INFO
2333                        "%s: Cleaning request mode %d, mask %02x, value %02x\n",
2334                        name, value, STp->cln_sense_mask, STp->cln_sense_value);
2335         } else if (code == MT_ST_DEF_OPTIONS) {
2336                 code = (options & ~MT_ST_CLEAR_DEFAULT);
2337                 value = (options & MT_ST_CLEAR_DEFAULT);
2338                 if (code == MT_ST_DEF_DENSITY) {
2339                         if (value == MT_ST_CLEAR_DEFAULT) {
2340                                 STm->default_density = (-1);
2341                                 DEBC( printk(KERN_INFO "%s: Density default disabled.\n",
2342                                        name));
2343                         } else {
2344                                 STm->default_density = value & 0xff;
2345                                 DEBC( printk(KERN_INFO "%s: Density default set to %x\n",
2346                                        name, STm->default_density));
2347                                 if (STp->ready == ST_READY) {
2348                                         STp->density_changed = 0;
2349                                         set_mode_densblk(STp, STm);
2350                                 }
2351                         }
2352                 } else if (code == MT_ST_DEF_DRVBUFFER) {
2353                         if (value == MT_ST_CLEAR_DEFAULT) {
2354                                 STp->default_drvbuffer = 0xff;
2355                                 DEBC( printk(KERN_INFO
2356                                        "%s: Drive buffer default disabled.\n", name));
2357                         } else {
2358                                 STp->default_drvbuffer = value & 7;
2359                                 DEBC( printk(KERN_INFO
2360                                        "%s: Drive buffer default set to %x\n",
2361                                        name, STp->default_drvbuffer));
2362                                 if (STp->ready == ST_READY)
2363                                         st_int_ioctl(STp, MTSETDRVBUFFER, STp->default_drvbuffer);
2364                         }
2365                 } else if (code == MT_ST_DEF_COMPRESSION) {
2366                         if (value == MT_ST_CLEAR_DEFAULT) {
2367                                 STm->default_compression = ST_DONT_TOUCH;
2368                                 DEBC( printk(KERN_INFO
2369                                        "%s: Compression default disabled.\n", name));
2370                         } else {
2371                                 if ((value & 0xff00) != 0) {
2372                                         STp->c_algo = (value & 0xff00) >> 8;
2373                                         DEBC( printk(KERN_INFO "%s: Compression algorithm set to 0x%x.\n",
2374                                                name, STp->c_algo));
2375                                 }
2376                                 if ((value & 0xff) != 0xff) {
2377                                         STm->default_compression = (value & 1 ? ST_YES : ST_NO);
2378                                         DEBC( printk(KERN_INFO "%s: Compression default set to %x\n",
2379                                                name, (value & 1)));
2380                                         if (STp->ready == ST_READY) {
2381                                                 STp->compression_changed = 0;
2382                                                 st_compression(STp, (STm->default_compression == ST_YES));
2383                                         }
2384                                 }
2385                         }
2386                 }
2387         } else
2388                 return (-EIO);
2389
2390         return 0;
2391 }
2392 \f
2393 #define MODE_HEADER_LENGTH  4
2394
2395 /* Mode header and page byte offsets */
2396 #define MH_OFF_DATA_LENGTH     0
2397 #define MH_OFF_MEDIUM_TYPE     1
2398 #define MH_OFF_DEV_SPECIFIC    2
2399 #define MH_OFF_BDESCS_LENGTH   3
2400 #define MP_OFF_PAGE_NBR        0
2401 #define MP_OFF_PAGE_LENGTH     1
2402
2403 /* Mode header and page bit masks */
2404 #define MH_BIT_WP              0x80
2405 #define MP_MSK_PAGE_NBR        0x3f
2406
2407 /* Don't return block descriptors */
2408 #define MODE_SENSE_OMIT_BDESCS 0x08
2409
2410 #define MODE_SELECT_PAGE_FORMAT 0x10
2411
2412 /* Read a mode page into the tape buffer. The block descriptors are included
2413    if incl_block_descs is true. The page control is ored to the page number
2414    parameter, if necessary. */
2415 static int read_mode_page(struct scsi_tape *STp, int page, int omit_block_descs)
2416 {
2417         unsigned char cmd[MAX_COMMAND_SIZE];
2418         struct st_request *SRpnt;
2419         int ret;
2420
2421         memset(cmd, 0, MAX_COMMAND_SIZE);
2422         cmd[0] = MODE_SENSE;
2423         if (omit_block_descs)
2424                 cmd[1] = MODE_SENSE_OMIT_BDESCS;
2425         cmd[2] = page;
2426         cmd[4] = 255;
2427
2428         SRpnt = st_allocate_request(STp);
2429         if (!SRpnt)
2430                 return STp->buffer->syscall_result;
2431
2432         ret = st_scsi_kern_execute(SRpnt, cmd, DMA_FROM_DEVICE,
2433                                    STp->buffer->b_data, cmd[4],
2434                                    STp->device->request_queue->rq_timeout,
2435                                    MAX_RETRIES);
2436         st_release_request(SRpnt);
2437
2438         return ret ? : STp->buffer->syscall_result;
2439 }
2440
2441
2442 /* Send the mode page in the tape buffer to the drive. Assumes that the mode data
2443    in the buffer is correctly formatted. The long timeout is used if slow is non-zero. */
2444 static int write_mode_page(struct scsi_tape *STp, int page, int slow)
2445 {
2446         int pgo, timeout, ret = 0;
2447         unsigned char cmd[MAX_COMMAND_SIZE];
2448         struct st_request *SRpnt;
2449
2450         memset(cmd, 0, MAX_COMMAND_SIZE);
2451         cmd[0] = MODE_SELECT;
2452         cmd[1] = MODE_SELECT_PAGE_FORMAT;
2453         pgo = MODE_HEADER_LENGTH + (STp->buffer)->b_data[MH_OFF_BDESCS_LENGTH];
2454         cmd[4] = pgo + (STp->buffer)->b_data[pgo + MP_OFF_PAGE_LENGTH] + 2;
2455
2456         /* Clear reserved fields */
2457         (STp->buffer)->b_data[MH_OFF_DATA_LENGTH] = 0;
2458         (STp->buffer)->b_data[MH_OFF_MEDIUM_TYPE] = 0;
2459         (STp->buffer)->b_data[MH_OFF_DEV_SPECIFIC] &= ~MH_BIT_WP;
2460         (STp->buffer)->b_data[pgo + MP_OFF_PAGE_NBR] &= MP_MSK_PAGE_NBR;
2461
2462         SRpnt = st_allocate_request(STp);
2463         if (!SRpnt)
2464                 return ret;
2465
2466         timeout = slow ? STp->long_timeout :
2467                 STp->device->request_queue->rq_timeout;
2468
2469         ret = st_scsi_kern_execute(SRpnt, cmd, DMA_TO_DEVICE,
2470                                    STp->buffer->b_data, cmd[4], timeout, 0);
2471         if (!ret)
2472                 ret = STp->buffer->syscall_result;
2473
2474         st_release_request(SRpnt);
2475
2476         return ret;
2477 }
2478
2479
2480 #define COMPRESSION_PAGE        0x0f
2481 #define COMPRESSION_PAGE_LENGTH 16
2482
2483 #define CP_OFF_DCE_DCC          2
2484 #define CP_OFF_C_ALGO           7
2485
2486 #define DCE_MASK  0x80
2487 #define DCC_MASK  0x40
2488 #define RED_MASK  0x60
2489
2490
2491 /* Control the compression with mode page 15. Algorithm not changed if zero.
2492
2493    The block descriptors are read and written because Sony SDT-7000 does not
2494    work without this (suggestion from Michael Schaefer <Michael.Schaefer@dlr.de>).
2495    Including block descriptors should not cause any harm to other drives. */
2496
2497 static int st_compression(struct scsi_tape * STp, int state)
2498 {
2499         int retval;
2500         int mpoffs;  /* Offset to mode page start */
2501         unsigned char *b_data = (STp->buffer)->b_data;
2502         DEB( char *name = tape_name(STp); )
2503
2504         if (STp->ready != ST_READY)
2505                 return (-EIO);
2506
2507         /* Read the current page contents */
2508         retval = read_mode_page(STp, COMPRESSION_PAGE, 0);
2509         if (retval) {
2510                 DEBC(printk(ST_DEB_MSG "%s: Compression mode page not supported.\n",
2511                             name));
2512                 return (-EIO);
2513         }
2514
2515         mpoffs = MODE_HEADER_LENGTH + b_data[MH_OFF_BDESCS_LENGTH];
2516         DEBC(printk(ST_DEB_MSG "%s: Compression state is %d.\n", name,
2517                     (b_data[mpoffs + CP_OFF_DCE_DCC] & DCE_MASK ? 1 : 0)));
2518
2519         /* Check if compression can be changed */
2520         if ((b_data[mpoffs + CP_OFF_DCE_DCC] & DCC_MASK) == 0) {
2521                 DEBC(printk(ST_DEB_MSG "%s: Compression not supported.\n", name));
2522                 return (-EIO);
2523         }
2524
2525         /* Do the change */
2526         if (state) {
2527                 b_data[mpoffs + CP_OFF_DCE_DCC] |= DCE_MASK;
2528                 if (STp->c_algo != 0)
2529                         b_data[mpoffs + CP_OFF_C_ALGO] = STp->c_algo;
2530         }
2531         else {
2532                 b_data[mpoffs + CP_OFF_DCE_DCC] &= ~DCE_MASK;
2533                 if (STp->c_algo != 0)
2534                         b_data[mpoffs + CP_OFF_C_ALGO] = 0; /* no compression */
2535         }
2536
2537         retval = write_mode_page(STp, COMPRESSION_PAGE, 0);
2538         if (retval) {
2539                 DEBC(printk(ST_DEB_MSG "%s: Compression change failed.\n", name));
2540                 return (-EIO);
2541         }
2542         DEBC(printk(ST_DEB_MSG "%s: Compression state changed to %d.\n",
2543                        name, state));
2544
2545         STp->compression_changed = 1;
2546         return 0;
2547 }
2548
2549
2550 /* Process the load and unload commands (does unload if the load code is zero) */
2551 static int do_load_unload(struct scsi_tape *STp, struct file *filp, int load_code)
2552 {
2553         int retval = (-EIO), timeout;
2554         DEB( char *name = tape_name(STp); )
2555         unsigned char cmd[MAX_COMMAND_SIZE];
2556         struct st_partstat *STps;
2557         struct st_request *SRpnt;
2558
2559         if (STp->ready != ST_READY && !load_code) {
2560                 if (STp->ready == ST_NO_TAPE)
2561                         return (-ENOMEDIUM);
2562                 else
2563                         return (-EIO);
2564         }
2565
2566         memset(cmd, 0, MAX_COMMAND_SIZE);
2567         cmd[0] = START_STOP;
2568         if (load_code)
2569                 cmd[4] |= 1;
2570         /*
2571          * If arg >= 1 && arg <= 6 Enhanced load/unload in HP C1553A
2572          */
2573         if (load_code >= 1 + MT_ST_HPLOADER_OFFSET
2574             && load_code <= 6 + MT_ST_HPLOADER_OFFSET) {
2575                 DEBC(printk(ST_DEB_MSG "%s: Enhanced %sload slot %2d.\n",
2576                             name, (cmd[4]) ? "" : "un",
2577                             load_code - MT_ST_HPLOADER_OFFSET));
2578                 cmd[3] = load_code - MT_ST_HPLOADER_OFFSET; /* MediaID field of C1553A */
2579         }
2580         if (STp->immediate) {
2581                 cmd[1] = 1;     /* Don't wait for completion */
2582                 timeout = STp->device->request_queue->rq_timeout;
2583         }
2584         else
2585                 timeout = STp->long_timeout;
2586
2587         DEBC(
2588                 if (!load_code)
2589                 printk(ST_DEB_MSG "%s: Unloading tape.\n", name);
2590                 else
2591                 printk(ST_DEB_MSG "%s: Loading tape.\n", name);
2592                 );
2593
2594         SRpnt = st_allocate_request(STp);
2595         if (!SRpnt)
2596                 return STp->buffer->syscall_result;
2597
2598         retval = st_scsi_kern_execute(SRpnt, cmd, DMA_NONE, NULL, 0, timeout,
2599                                       MAX_RETRIES);
2600         if (retval)
2601                 goto out;
2602
2603         retval = (STp->buffer)->syscall_result;
2604
2605         if (!retval) {  /* SCSI command successful */
2606
2607                 if (!load_code) {
2608                         STp->rew_at_close = 0;
2609                         STp->ready = ST_NO_TAPE;
2610                 }
2611                 else {
2612                         STp->rew_at_close = STp->autorew_dev;
2613                         retval = check_tape(STp, filp);
2614                         if (retval > 0)
2615                                 retval = 0;
2616                 }
2617         }
2618         else {
2619                 STps = &(STp->ps[STp->partition]);
2620                 STps->drv_file = STps->drv_block = (-1);
2621         }
2622 out:
2623         st_release_request(SRpnt);
2624
2625         return retval;
2626 }
2627 \f
2628 #if DEBUG
2629 #define ST_DEB_FORWARD  0
2630 #define ST_DEB_BACKWARD 1
2631 static void deb_space_print(char *name, int direction, char *units, unsigned char *cmd)
2632 {
2633         s32 sc;
2634
2635         sc = cmd[2] & 0x80 ? 0xff000000 : 0;
2636         sc |= (cmd[2] << 16) | (cmd[3] << 8) | cmd[4];
2637         if (direction)
2638                 sc = -sc;
2639         printk(ST_DEB_MSG "%s: Spacing tape %s over %d %s.\n", name,
2640                direction ? "backward" : "forward", sc, units);
2641 }
2642 #endif
2643
2644
2645 /* Internal ioctl function */
2646 static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned long arg)
2647 {
2648         int timeout;
2649         long ltmp;
2650         int ioctl_result;
2651         int chg_eof = 1;
2652         unsigned char cmd[MAX_COMMAND_SIZE];
2653         struct st_request *SRpnt;
2654         struct st_partstat *STps;
2655         int fileno, blkno, at_sm, undone;
2656         int datalen = 0, direction = DMA_NONE;
2657         char *name = tape_name(STp);
2658
2659         WARN_ON(STp->buffer->do_dio != 0);
2660         if (STp->ready != ST_READY) {
2661                 if (STp->ready == ST_NO_TAPE)
2662                         return (-ENOMEDIUM);
2663                 else
2664                         return (-EIO);
2665         }
2666         timeout = STp->long_timeout;
2667         STps = &(STp->ps[STp->partition]);
2668         fileno = STps->drv_file;
2669         blkno = STps->drv_block;
2670         at_sm = STps->at_sm;
2671
2672         memset(cmd, 0, MAX_COMMAND_SIZE);
2673         switch (cmd_in) {
2674         case MTFSFM:
2675                 chg_eof = 0;    /* Changed from the FSF after this */
2676         case MTFSF:
2677                 cmd[0] = SPACE;
2678                 cmd[1] = 0x01;  /* Space FileMarks */
2679                 cmd[2] = (arg >> 16);
2680                 cmd[3] = (arg >> 8);
2681                 cmd[4] = arg;
2682                 DEBC(deb_space_print(name, ST_DEB_FORWARD, "filemarks", cmd);)
2683                 if (fileno >= 0)
2684                         fileno += arg;
2685                 blkno = 0;
2686                 at_sm &= (arg == 0);
2687                 break;
2688         case MTBSFM:
2689                 chg_eof = 0;    /* Changed from the FSF after this */
2690         case MTBSF:
2691                 cmd[0] = SPACE;
2692                 cmd[1] = 0x01;  /* Space FileMarks */
2693                 ltmp = (-arg);
2694                 cmd[2] = (ltmp >> 16);
2695                 cmd[3] = (ltmp >> 8);
2696                 cmd[4] = ltmp;
2697                 DEBC(deb_space_print(name, ST_DEB_BACKWARD, "filemarks", cmd);)
2698                 if (fileno >= 0)
2699                         fileno -= arg;
2700                 blkno = (-1);   /* We can't know the block number */
2701                 at_sm &= (arg == 0);
2702                 break;
2703         case MTFSR:
2704                 cmd[0] = SPACE;
2705                 cmd[1] = 0x00;  /* Space Blocks */
2706                 cmd[2] = (arg >> 16);
2707                 cmd[3] = (arg >> 8);
2708                 cmd[4] = arg;
2709                 DEBC(deb_space_print(name, ST_DEB_FORWARD, "blocks", cmd);)
2710                 if (blkno >= 0)
2711                         blkno += arg;
2712                 at_sm &= (arg == 0);
2713                 break;
2714         case MTBSR:
2715                 cmd[0] = SPACE;
2716                 cmd[1] = 0x00;  /* Space Blocks */
2717                 ltmp = (-arg);
2718                 cmd[2] = (ltmp >> 16);
2719                 cmd[3] = (ltmp >> 8);
2720                 cmd[4] = ltmp;
2721                 DEBC(deb_space_print(name, ST_DEB_BACKWARD, "blocks", cmd);)
2722                 if (blkno >= 0)
2723                         blkno -= arg;
2724                 at_sm &= (arg == 0);
2725                 break;
2726         case MTFSS:
2727                 cmd[0] = SPACE;
2728                 cmd[1] = 0x04;  /* Space Setmarks */
2729                 cmd[2] = (arg >> 16);
2730                 cmd[3] = (arg >> 8);
2731                 cmd[4] = arg;
2732                 DEBC(deb_space_print(name, ST_DEB_FORWARD, "setmarks", cmd);)
2733                 if (arg != 0) {
2734                         blkno = fileno = (-1);
2735                         at_sm = 1;
2736                 }
2737                 break;
2738         case MTBSS:
2739                 cmd[0] = SPACE;
2740                 cmd[1] = 0x04;  /* Space Setmarks */
2741                 ltmp = (-arg);
2742                 cmd[2] = (ltmp >> 16);
2743                 cmd[3] = (ltmp >> 8);
2744                 cmd[4] = ltmp;
2745                 DEBC(deb_space_print(name, ST_DEB_BACKWARD, "setmarks", cmd);)
2746                 if (arg != 0) {
2747                         blkno = fileno = (-1);
2748                         at_sm = 1;
2749                 }
2750                 break;
2751         case MTWEOF:
2752         case MTWSM:
2753                 if (STp->write_prot)
2754                         return (-EACCES);
2755                 cmd[0] = WRITE_FILEMARKS;
2756                 if (cmd_in == MTWSM)
2757                         cmd[1] = 2;
2758                 cmd[2] = (arg >> 16);
2759                 cmd[3] = (arg >> 8);
2760                 cmd[4] = arg;
2761                 timeout = STp->device->request_queue->rq_timeout;
2762                 DEBC(
2763                      if (cmd_in == MTWEOF)
2764                                printk(ST_DEB_MSG "%s: Writing %d filemarks.\n", name,
2765                                  cmd[2] * 65536 + cmd[3] * 256 + cmd[4]);
2766                      else
2767                                 printk(ST_DEB_MSG "%s: Writing %d setmarks.\n", name,
2768                                  cmd[2] * 65536 + cmd[3] * 256 + cmd[4]);
2769                 )
2770                 if (fileno >= 0)
2771                         fileno += arg;
2772                 blkno = 0;
2773                 at_sm = (cmd_in == MTWSM);
2774                 break;
2775         case MTREW:
2776                 cmd[0] = REZERO_UNIT;
2777                 if (STp->immediate) {
2778                         cmd[1] = 1;     /* Don't wait for completion */
2779                         timeout = STp->device->request_queue->rq_timeout;
2780                 }
2781                 DEBC(printk(ST_DEB_MSG "%s: Rewinding tape.\n", name));
2782                 fileno = blkno = at_sm = 0;
2783                 break;
2784         case MTNOP:
2785                 DEBC(printk(ST_DEB_MSG "%s: No op on tape.\n", name));
2786                 return 0;       /* Should do something ? */
2787                 break;
2788         case MTRETEN:
2789                 cmd[0] = START_STOP;
2790                 if (STp->immediate) {
2791                         cmd[1] = 1;     /* Don't wait for completion */
2792                         timeout = STp->device->request_queue->rq_timeout;
2793                 }
2794                 cmd[4] = 3;
2795                 DEBC(printk(ST_DEB_MSG "%s: Retensioning tape.\n", name));
2796                 fileno = blkno = at_sm = 0;
2797                 break;
2798         case MTEOM:
2799                 if (!STp->fast_mteom) {
2800                         /* space to the end of tape */
2801                         ioctl_result = st_int_ioctl(STp, MTFSF, 0x7fffff);
2802                         fileno = STps->drv_file;
2803                         if (STps->eof >= ST_EOD_1)
2804                                 return 0;
2805                         /* The next lines would hide the number of spaced FileMarks
2806                            That's why I inserted the previous lines. I had no luck
2807                            with detecting EOM with FSF, so we go now to EOM.
2808                            Joerg Weule */
2809                 } else
2810                         fileno = (-1);
2811                 cmd[0] = SPACE;
2812                 cmd[1] = 3;
2813                 DEBC(printk(ST_DEB_MSG "%s: Spacing to end of recorded medium.\n",
2814                             name));
2815                 blkno = -1;
2816                 at_sm = 0;
2817                 break;
2818         case MTERASE:
2819                 if (STp->write_prot)
2820                         return (-EACCES);
2821                 cmd[0] = ERASE;
2822                 cmd[1] = (arg ? 1 : 0); /* Long erase with non-zero argument */
2823                 if (STp->immediate) {
2824                         cmd[1] |= 2;    /* Don't wait for completion */
2825                         timeout = STp->device->request_queue->rq_timeout;
2826                 }
2827                 else
2828                         timeout = STp->long_timeout * 8;
2829
2830                 DEBC(printk(ST_DEB_MSG "%s: Erasing tape.\n", name));
2831                 fileno = blkno = at_sm = 0;
2832                 break;
2833         case MTSETBLK:          /* Set block length */
2834         case MTSETDENSITY:      /* Set tape density */
2835         case MTSETDRVBUFFER:    /* Set drive buffering */
2836         case SET_DENS_AND_BLK:  /* Set density and block size */
2837                 chg_eof = 0;
2838                 if (STp->dirty || (STp->buffer)->buffer_bytes != 0)
2839                         return (-EIO);  /* Not allowed if data in buffer */
2840                 if ((cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) &&
2841                     (arg & MT_ST_BLKSIZE_MASK) != 0 &&
2842                     STp->max_block > 0 &&
2843                     ((arg & MT_ST_BLKSIZE_MASK) < STp->min_block ||
2844                      (arg & MT_ST_BLKSIZE_MASK) > STp->max_block)) {
2845                         printk(KERN_WARNING "%s: Illegal block size.\n", name);
2846                         return (-EINVAL);
2847                 }
2848                 cmd[0] = MODE_SELECT;
2849                 if ((STp->use_pf & USE_PF))
2850                         cmd[1] = MODE_SELECT_PAGE_FORMAT;
2851                 cmd[4] = datalen = 12;
2852                 direction = DMA_TO_DEVICE;
2853
2854                 memset((STp->buffer)->b_data, 0, 12);
2855                 if (cmd_in == MTSETDRVBUFFER)
2856                         (STp->buffer)->b_data[2] = (arg & 7) << 4;
2857                 else
2858                         (STp->buffer)->b_data[2] =
2859                             STp->drv_buffer << 4;
2860                 (STp->buffer)->b_data[3] = 8;   /* block descriptor length */
2861                 if (cmd_in == MTSETDENSITY) {
2862                         (STp->buffer)->b_data[4] = arg;
2863                         STp->density_changed = 1;       /* At least we tried ;-) */
2864                 } else if (cmd_in == SET_DENS_AND_BLK)
2865                         (STp->buffer)->b_data[4] = arg >> 24;
2866                 else
2867                         (STp->buffer)->b_data[4] = STp->density;
2868                 if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) {
2869                         ltmp = arg & MT_ST_BLKSIZE_MASK;
2870                         if (cmd_in == MTSETBLK)
2871                                 STp->blksize_changed = 1; /* At least we tried ;-) */
2872                 } else
2873                         ltmp = STp->block_size;
2874                 (STp->buffer)->b_data[9] = (ltmp >> 16);
2875                 (STp->buffer)->b_data[10] = (ltmp >> 8);
2876                 (STp->buffer)->b_data[11] = ltmp;
2877                 timeout = STp->device->request_queue->rq_timeout;
2878                 DEBC(
2879                         if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK)
2880                                 printk(ST_DEB_MSG
2881                                        "%s: Setting block size to %d bytes.\n", name,
2882                                        (STp->buffer)->b_data[9] * 65536 +
2883                                        (STp->buffer)->b_data[10] * 256 +
2884                                        (STp->buffer)->b_data[11]);
2885                         if (cmd_in == MTSETDENSITY || cmd_in == SET_DENS_AND_BLK)
2886                                 printk(ST_DEB_MSG
2887                                        "%s: Setting density code to %x.\n", name,
2888                                        (STp->buffer)->b_data[4]);
2889                         if (cmd_in == MTSETDRVBUFFER)
2890                                 printk(ST_DEB_MSG
2891                                        "%s: Setting drive buffer code to %d.\n", name,
2892                                     ((STp->buffer)->b_data[2] >> 4) & 7);
2893                 )
2894                 break;
2895         default:
2896                 return (-ENOSYS);
2897         }
2898
2899         SRpnt = st_allocate_request(STp);
2900         if (!SRpnt)
2901                 return (STp->buffer)->syscall_result;
2902
2903         ioctl_result = st_scsi_kern_execute(SRpnt, cmd, direction,
2904                                             STp->buffer->b_data, datalen,
2905                                             timeout, MAX_RETRIES);
2906         if (!ioctl_result)
2907                 ioctl_result = (STp->buffer)->syscall_result;
2908
2909         if (!ioctl_result) {    /* SCSI command successful */
2910                 st_release_request(SRpnt);
2911                 SRpnt = NULL;
2912                 STps->drv_block = blkno;
2913                 STps->drv_file = fileno;
2914                 STps->at_sm = at_sm;
2915
2916                 if (cmd_in == MTBSFM)
2917                         ioctl_result = st_int_ioctl(STp, MTFSF, 1);
2918                 else if (cmd_in == MTFSFM)
2919                         ioctl_result = st_int_ioctl(STp, MTBSF, 1);
2920
2921                 if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) {
2922                         int old_block_size = STp->block_size;
2923                         STp->block_size = arg & MT_ST_BLKSIZE_MASK;
2924                         if (STp->block_size != 0) {
2925                                 if (old_block_size == 0)
2926                                         normalize_buffer(STp->buffer);
2927                                 (STp->buffer)->buffer_blocks =
2928                                     (STp->buffer)->buffer_size / STp->block_size;
2929                         }
2930                         (STp->buffer)->buffer_bytes = (STp->buffer)->read_pointer = 0;
2931                         if (cmd_in == SET_DENS_AND_BLK)
2932                                 STp->density = arg >> MT_ST_DENSITY_SHIFT;
2933                 } else if (cmd_in == MTSETDRVBUFFER)
2934                         STp->drv_buffer = (arg & 7);
2935                 else if (cmd_in == MTSETDENSITY)
2936                         STp->density = arg;
2937
2938                 if (cmd_in == MTEOM)
2939                         STps->eof = ST_EOD;
2940                 else if (cmd_in == MTFSF)
2941                         STps->eof = ST_FM;
2942                 else if (chg_eof)
2943                         STps->eof = ST_NOEOF;
2944
2945                 if (cmd_in == MTWEOF)
2946                         STps->rw = ST_IDLE;
2947         } else { /* SCSI command was not completely successful. Don't return
2948                     from this block without releasing the SCSI command block! */
2949                 struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
2950
2951                 if (cmdstatp->flags & SENSE_EOM) {
2952                         if (cmd_in != MTBSF && cmd_in != MTBSFM &&
2953                             cmd_in != MTBSR && cmd_in != MTBSS)
2954                                 STps->eof = ST_EOM_OK;
2955                         STps->drv_block = 0;
2956                 }
2957
2958                 if (cmdstatp->remainder_valid)
2959                         undone = (int)cmdstatp->uremainder64;
2960                 else
2961                         undone = 0;
2962
2963                 if (cmd_in == MTWEOF &&
2964                     cmdstatp->have_sense &&
2965                     (cmdstatp->flags & SENSE_EOM)) {
2966                         if (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
2967                             cmdstatp->sense_hdr.sense_key == RECOVERED_ERROR) {
2968                                 ioctl_result = 0;       /* EOF(s) written successfully at EOM */
2969                                 STps->eof = ST_NOEOF;
2970                         } else {  /* Writing EOF(s) failed */
2971                                 if (fileno >= 0)
2972                                         fileno -= undone;
2973                                 if (undone < arg)
2974                                         STps->eof = ST_NOEOF;
2975                         }
2976                         STps->drv_file = fileno;
2977                 } else if ((cmd_in == MTFSF) || (cmd_in == MTFSFM)) {
2978                         if (fileno >= 0)
2979                                 STps->drv_file = fileno - undone;
2980                         else
2981                                 STps->drv_file = fileno;
2982                         STps->drv_block = -1;
2983                         STps->eof = ST_NOEOF;
2984                 } else if ((cmd_in == MTBSF) || (cmd_in == MTBSFM)) {
2985                         if (arg > 0 && undone < 0)  /* Some drives get this wrong */
2986                                 undone = (-undone);
2987                         if (STps->drv_file >= 0)
2988                                 STps->drv_file = fileno + undone;
2989                         STps->drv_block = 0;
2990                         STps->eof = ST_NOEOF;
2991                 } else if (cmd_in == MTFSR) {
2992                         if (cmdstatp->flags & SENSE_FMK) {      /* Hit filemark */
2993                                 if (STps->drv_file >= 0)
2994                                         STps->drv_file++;
2995                                 STps->drv_block = 0;
2996                                 STps->eof = ST_FM;
2997                         } else {
2998                                 if (blkno >= undone)
2999                                         STps->drv_block = blkno - undone;
3000                                 else
3001                                         STps->drv_block = (-1);
3002                                 STps->eof = ST_NOEOF;
3003                         }
3004                 } else if (cmd_in == MTBSR) {
3005                         if (cmdstatp->flags & SENSE_FMK) {      /* Hit filemark */
3006                                 STps->drv_file--;
3007                                 STps->drv_block = (-1);
3008                         } else {
3009                                 if (arg > 0 && undone < 0)  /* Some drives get this wrong */
3010                                         undone = (-undone);
3011                                 if (STps->drv_block >= 0)
3012                                         STps->drv_block = blkno + undone;
3013                         }
3014                         STps->eof = ST_NOEOF;
3015                 } else if (cmd_in == MTEOM) {
3016                         STps->drv_file = (-1);
3017                         STps->drv_block = (-1);
3018                         STps->eof = ST_EOD;
3019                 } else if (cmd_in == MTSETBLK ||
3020                            cmd_in == MTSETDENSITY ||
3021                            cmd_in == MTSETDRVBUFFER ||
3022                            cmd_in == SET_DENS_AND_BLK) {
3023                         if (cmdstatp->sense_hdr.sense_key == ILLEGAL_REQUEST &&
3024                             !(STp->use_pf & PF_TESTED)) {
3025                                 /* Try the other possible state of Page Format if not
3026                                    already tried */
3027                                 STp->use_pf = !STp->use_pf | PF_TESTED;
3028                                 st_release_request(SRpnt);
3029                                 SRpnt = NULL;
3030                                 return st_int_ioctl(STp, cmd_in, arg);
3031                         }
3032                 } else if (chg_eof)
3033                         STps->eof = ST_NOEOF;
3034
3035                 if (cmdstatp->sense_hdr.sense_key == BLANK_CHECK)
3036                         STps->eof = ST_EOD;
3037
3038                 st_release_request(SRpnt);
3039                 SRpnt = NULL;
3040         }
3041
3042         return ioctl_result;
3043 }
3044 \f
3045
3046 /* Get the tape position. If bt == 2, arg points into a kernel space mt_loc
3047    structure. */
3048
3049 static int get_location(struct scsi_tape *STp, unsigned int *block, int *partition,
3050                         int logical)
3051 {
3052         int result;
3053         unsigned char scmd[MAX_COMMAND_SIZE];
3054         struct st_request *SRpnt;
3055         DEB( char *name = tape_name(STp); )
3056
3057         if (STp->ready != ST_READY)
3058                 return (-EIO);
3059
3060         memset(scmd, 0, MAX_COMMAND_SIZE);
3061         if ((STp->device)->scsi_level < SCSI_2) {
3062                 scmd[0] = QFA_REQUEST_BLOCK;
3063                 scmd[4] = 3;
3064         } else {
3065                 scmd[0] = READ_POSITION;
3066                 if (!logical && !STp->scsi2_logical)
3067                         scmd[1] = 1;
3068         }
3069
3070         SRpnt = st_allocate_request(STp);
3071         if (!SRpnt)
3072                 return STp->buffer->syscall_result;
3073
3074         result = st_scsi_kern_execute(SRpnt, scmd, DMA_FROM_DEVICE,
3075                                       STp->buffer->b_data, 20,
3076                                       STp->device->request_queue->rq_timeout,
3077                                       MAX_READY_RETRIES);
3078         if (result)
3079                 goto out;
3080
3081         if ((STp->buffer)->syscall_result != 0 ||
3082             (STp->device->scsi_level >= SCSI_2 &&
3083              ((STp->buffer)->b_data[0] & 4) != 0)) {
3084                 *block = *partition = 0;
3085                 DEBC(printk(ST_DEB_MSG "%s: Can't read tape position.\n", name));
3086                 result = (-EIO);
3087         } else {
3088                 result = 0;
3089                 if ((STp->device)->scsi_level < SCSI_2) {
3090                         *block = ((STp->buffer)->b_data[0] << 16)
3091                             + ((STp->buffer)->b_data[1] << 8)
3092                             + (STp->buffer)->b_data[2];
3093                         *partition = 0;
3094                 } else {
3095                         *block = ((STp->buffer)->b_data[4] << 24)
3096                             + ((STp->buffer)->b_data[5] << 16)
3097                             + ((STp->buffer)->b_data[6] << 8)
3098                             + (STp->buffer)->b_data[7];
3099                         *partition = (STp->buffer)->b_data[1];
3100                         if (((STp->buffer)->b_data[0] & 0x80) &&
3101                             (STp->buffer)->b_data[1] == 0)      /* BOP of partition 0 */
3102                                 STp->ps[0].drv_block = STp->ps[0].drv_file = 0;
3103                 }
3104                 DEBC(printk(ST_DEB_MSG "%s: Got tape pos. blk %d part %d.\n", name,
3105                             *block, *partition));
3106         }
3107 out:
3108         st_release_request(SRpnt);
3109         SRpnt = NULL;
3110
3111         return result;
3112 }
3113
3114
3115 /* Set the tape block and partition. Negative partition means that only the
3116    block should be set in vendor specific way. */
3117 static int set_location(struct scsi_tape *STp, unsigned int block, int partition,
3118                         int logical)
3119 {
3120         struct st_partstat *STps;
3121         int result, p;
3122         unsigned int blk;
3123         int timeout;
3124         unsigned char scmd[MAX_COMMAND_SIZE];
3125         struct st_request *SRpnt;
3126         DEB( char *name = tape_name(STp); )
3127
3128         if (STp->ready != ST_READY)
3129                 return (-EIO);
3130         timeout = STp->long_timeout;
3131         STps = &(STp->ps[STp->partition]);
3132
3133         DEBC(printk(ST_DEB_MSG "%s: Setting block to %d and partition to %d.\n",
3134                     name, block, partition));
3135         DEB(if (partition < 0)
3136                 return (-EIO); )
3137
3138         /* Update the location at the partition we are leaving */
3139         if ((!STp->can_partitions && partition != 0) ||
3140             partition >= ST_NBR_PARTITIONS)
3141                 return (-EINVAL);
3142         if (partition != STp->partition) {
3143                 if (get_location(STp, &blk, &p, 1))
3144                         STps->last_block_valid = 0;
3145                 else {
3146                         STps->last_block_valid = 1;
3147                         STps->last_block_visited = blk;
3148                         DEBC(printk(ST_DEB_MSG
3149                                     "%s: Visited block %d for partition %d saved.\n",
3150                                     name, blk, STp->partition));
3151                 }
3152         }
3153
3154         memset(scmd, 0, MAX_COMMAND_SIZE);
3155         if ((STp->device)->scsi_level < SCSI_2) {
3156                 scmd[0] = QFA_SEEK_BLOCK;
3157                 scmd[2] = (block >> 16);
3158                 scmd[3] = (block >> 8);
3159                 scmd[4] = block;
3160                 scmd[5] = 0;
3161         } else {
3162                 scmd[0] = SEEK_10;
3163                 scmd[3] = (block >> 24);
3164                 scmd[4] = (block >> 16);
3165                 scmd[5] = (block >> 8);
3166                 scmd[6] = block;
3167                 if (!logical && !STp->scsi2_logical)
3168                         scmd[1] = 4;
3169                 if (STp->partition != partition) {
3170                         scmd[1] |= 2;
3171                         scmd[8] = partition;
3172                         DEBC(printk(ST_DEB_MSG
3173                                     "%s: Trying to change partition from %d to %d\n",
3174                                     name, STp->partition, partition));
3175                 }
3176         }
3177         if (STp->immediate) {
3178                 scmd[1] |= 1;           /* Don't wait for completion */
3179                 timeout = STp->device->request_queue->rq_timeout;
3180         }
3181
3182         SRpnt = st_allocate_request(STp);
3183         if (!SRpnt)
3184                 return STp->buffer->syscall_result;
3185
3186         result = st_scsi_kern_execute(SRpnt, scmd, DMA_NONE, NULL, 0,
3187                                       timeout, MAX_READY_RETRIES);
3188         if (result)
3189                 goto out;
3190
3191         STps->drv_block = STps->drv_file = (-1);
3192         STps->eof = ST_NOEOF;
3193         if ((STp->buffer)->syscall_result != 0) {
3194                 result = (-EIO);
3195                 if (STp->can_partitions &&
3196                     (STp->device)->scsi_level >= SCSI_2 &&
3197                     (p = find_partition(STp)) >= 0)
3198                         STp->partition = p;
3199         } else {
3200                 if (STp->can_partitions) {
3201                         STp->partition = partition;
3202                         STps = &(STp->ps[partition]);
3203                         if (!STps->last_block_valid ||
3204                             STps->last_block_visited != block) {
3205                                 STps->at_sm = 0;
3206                                 STps->rw = ST_IDLE;
3207                         }
3208                 } else
3209                         STps->at_sm = 0;
3210                 if (block == 0)
3211                         STps->drv_block = STps->drv_file = 0;
3212                 result = 0;
3213         }
3214 out:
3215         st_release_request(SRpnt);
3216         SRpnt = NULL;
3217
3218         return result;
3219 }
3220
3221
3222 /* Find the current partition number for the drive status. Called from open and
3223    returns either partition number of negative error code. */
3224 static int find_partition(struct scsi_tape *STp)
3225 {
3226         int i, partition;
3227         unsigned int block;
3228
3229         if ((i = get_location(STp, &block, &partition, 1)) < 0)
3230                 return i;
3231         if (partition >= ST_NBR_PARTITIONS)
3232                 return (-EIO);
3233         return partition;
3234 }
3235
3236
3237 /* Change the partition if necessary */
3238 static int switch_partition(struct scsi_tape *STp)
3239 {
3240         struct st_partstat *STps;
3241
3242         if (STp->partition == STp->new_partition)
3243                 return 0;
3244         STps = &(STp->ps[STp->new_partition]);
3245         if (!STps->last_block_valid)
3246                 STps->last_block_visited = 0;
3247         return set_location(STp, STps->last_block_visited, STp->new_partition, 1);
3248 }
3249 \f
3250 /* Functions for reading and writing the medium partition mode page. */
3251
3252 #define PART_PAGE   0x11
3253 #define PART_PAGE_FIXED_LENGTH 8
3254
3255 #define PP_OFF_MAX_ADD_PARTS   2
3256 #define PP_OFF_NBR_ADD_PARTS   3
3257 #define PP_OFF_FLAGS           4
3258 #define PP_OFF_PART_UNITS      6
3259 #define PP_OFF_RESERVED        7
3260
3261 #define PP_BIT_IDP             0x20
3262 #define PP_MSK_PSUM_MB         0x10
3263
3264 /* Get the number of partitions on the tape. As a side effect reads the
3265    mode page into the tape buffer. */
3266 static int nbr_partitions(struct scsi_tape *STp)
3267 {
3268         int result;
3269         DEB( char *name = tape_name(STp); )
3270
3271         if (STp->ready != ST_READY)
3272                 return (-EIO);
3273
3274         result = read_mode_page(STp, PART_PAGE, 1);
3275
3276         if (result) {
3277                 DEBC(printk(ST_DEB_MSG "%s: Can't read medium partition page.\n",
3278                             name));
3279                 result = (-EIO);
3280         } else {
3281                 result = (STp->buffer)->b_data[MODE_HEADER_LENGTH +
3282                                               PP_OFF_NBR_ADD_PARTS] + 1;
3283                 DEBC(printk(ST_DEB_MSG "%s: Number of partitions %d.\n", name, result));
3284         }
3285
3286         return result;
3287 }
3288
3289
3290 /* Partition the tape into two partitions if size > 0 or one partition if
3291    size == 0.
3292
3293    The block descriptors are read and written because Sony SDT-7000 does not
3294    work without this (suggestion from Michael Schaefer <Michael.Schaefer@dlr.de>).
3295
3296    My HP C1533A drive returns only one partition size field. This is used to
3297    set the size of partition 1. There is no size field for the default partition.
3298    Michael Schaefer's Sony SDT-7000 returns two descriptors and the second is
3299    used to set the size of partition 1 (this is what the SCSI-3 standard specifies).
3300    The following algorithm is used to accommodate both drives: if the number of
3301    partition size fields is greater than the maximum number of additional partitions
3302    in the mode page, the second field is used. Otherwise the first field is used.
3303
3304    For Seagate DDS drives the page length must be 8 when no partitions is defined
3305    and 10 when 1 partition is defined (information from Eric Lee Green). This is
3306    is acceptable also to some other old drives and enforced if the first partition
3307    size field is used for the first additional partition size.
3308  */
3309 static int partition_tape(struct scsi_tape *STp, int size)
3310 {
3311         char *name = tape_name(STp);
3312         int result;
3313         int pgo, psd_cnt, psdo;
3314         unsigned char *bp;
3315
3316         result = read_mode_page(STp, PART_PAGE, 0);
3317         if (result) {
3318                 DEBC(printk(ST_DEB_MSG "%s: Can't read partition mode page.\n", name));
3319                 return result;
3320         }
3321         /* The mode page is in the buffer. Let's modify it and write it. */
3322         bp = (STp->buffer)->b_data;
3323         pgo = MODE_HEADER_LENGTH + bp[MH_OFF_BDESCS_LENGTH];
3324         DEBC(printk(ST_DEB_MSG "%s: Partition page length is %d bytes.\n",
3325                     name, bp[pgo + MP_OFF_PAGE_LENGTH] + 2));
3326
3327         psd_cnt = (bp[pgo + MP_OFF_PAGE_LENGTH] + 2 - PART_PAGE_FIXED_LENGTH) / 2;
3328         psdo = pgo + PART_PAGE_FIXED_LENGTH;
3329         if (psd_cnt > bp[pgo + PP_OFF_MAX_ADD_PARTS]) {
3330                 bp[psdo] = bp[psdo + 1] = 0xff;  /* Rest of the tape */
3331                 psdo += 2;
3332         }
3333         memset(bp + psdo, 0, bp[pgo + PP_OFF_NBR_ADD_PARTS] * 2);
3334
3335         DEBC(printk("%s: psd_cnt %d, max.parts %d, nbr_parts %d\n", name,
3336                     psd_cnt, bp[pgo + PP_OFF_MAX_ADD_PARTS],
3337                     bp[pgo + PP_OFF_NBR_ADD_PARTS]));
3338
3339         if (size <= 0) {
3340                 bp[pgo + PP_OFF_NBR_ADD_PARTS] = 0;
3341                 if (psd_cnt <= bp[pgo + PP_OFF_MAX_ADD_PARTS])
3342                     bp[pgo + MP_OFF_PAGE_LENGTH] = 6;
3343                 DEBC(printk(ST_DEB_MSG "%s: Formatting tape with one partition.\n",
3344                             name));
3345         } else {
3346                 bp[psdo] = (size >> 8) & 0xff;
3347                 bp[psdo + 1] = size & 0xff;
3348                 bp[pgo + 3] = 1;
3349                 if (bp[pgo + MP_OFF_PAGE_LENGTH] < 8)
3350                     bp[pgo + MP_OFF_PAGE_LENGTH] = 8;
3351                 DEBC(printk(ST_DEB_MSG
3352                             "%s: Formatting tape with two partitions (1 = %d MB).\n",
3353                             name, size));
3354         }
3355         bp[pgo + PP_OFF_PART_UNITS] = 0;
3356         bp[pgo + PP_OFF_RESERVED] = 0;
3357         bp[pgo + PP_OFF_FLAGS] = PP_BIT_IDP | PP_MSK_PSUM_MB;
3358
3359         result = write_mode_page(STp, PART_PAGE, 1);
3360         if (result) {
3361                 printk(KERN_INFO "%s: Partitioning of tape failed.\n", name);
3362                 result = (-EIO);
3363         }
3364
3365         return result;
3366 }
3367 \f
3368
3369
3370 /* The ioctl command */
3371 static long st_ioctl(struct file *file, unsigned int cmd_in, unsigned long arg)
3372 {
3373         int i, cmd_nr, cmd_type, bt;
3374         int retval = 0;
3375         unsigned int blk;
3376         struct scsi_tape *STp = file->private_data;
3377         struct st_modedef *STm;
3378         struct st_partstat *STps;
3379         char *name = tape_name(STp);
3380         void __user *p = (void __user *)arg;
3381
3382         if (mutex_lock_interruptible(&STp->lock))
3383                 return -ERESTARTSYS;
3384
3385         DEB(
3386         if (debugging && !STp->in_use) {
3387                 printk(ST_DEB_MSG "%s: Incorrect device.\n", name);
3388                 retval = (-EIO);
3389                 goto out;
3390         } ) /* end DEB */
3391
3392         STm = &(STp->modes[STp->current_mode]);
3393         STps = &(STp->ps[STp->partition]);
3394
3395         /*
3396          * If we are in the middle of error recovery, don't let anyone
3397          * else try and use this device.  Also, if error recovery fails, it
3398          * may try and take the device offline, in which case all further
3399          * access to the device is prohibited.
3400          */
3401         retval = scsi_nonblockable_ioctl(STp->device, cmd_in, p,
3402                                         file->f_flags & O_NDELAY);
3403         if (!scsi_block_when_processing_errors(STp->device) || retval != -ENODEV)
3404                 goto out;
3405         retval = 0;
3406
3407         cmd_type = _IOC_TYPE(cmd_in);
3408         cmd_nr = _IOC_NR(cmd_in);
3409
3410         if (cmd_type == _IOC_TYPE(MTIOCTOP) && cmd_nr == _IOC_NR(MTIOCTOP)) {
3411                 struct mtop mtc;
3412
3413                 if (_IOC_SIZE(cmd_in) != sizeof(mtc)) {
3414                         retval = (-EINVAL);
3415                         goto out;
3416                 }
3417
3418                 i = copy_from_user(&mtc, p, sizeof(struct mtop));
3419                 if (i) {
3420                         retval = (-EFAULT);
3421                         goto out;
3422                 }
3423
3424                 if (mtc.mt_op == MTSETDRVBUFFER && !capable(CAP_SYS_ADMIN)) {
3425                         printk(KERN_WARNING
3426                                "%s: MTSETDRVBUFFER only allowed for root.\n", name);
3427                         retval = (-EPERM);
3428                         goto out;
3429                 }
3430                 if (!STm->defined &&
3431                     (mtc.mt_op != MTSETDRVBUFFER &&
3432                      (mtc.mt_count & MT_ST_OPTIONS) == 0)) {
3433                         retval = (-ENXIO);
3434                         goto out;
3435                 }
3436
3437                 if (!STp->pos_unknown) {
3438
3439                         if (STps->eof == ST_FM_HIT) {
3440                                 if (mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM ||
3441                                     mtc.mt_op == MTEOM) {
3442                                         mtc.mt_count -= 1;
3443                                         if (STps->drv_file >= 0)
3444                                                 STps->drv_file += 1;
3445                                 } else if (mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM) {
3446                                         mtc.mt_count += 1;
3447                                         if (STps->drv_file >= 0)
3448                                                 STps->drv_file += 1;
3449                                 }
3450                         }
3451
3452                         if (mtc.mt_op == MTSEEK) {
3453                                 /* Old position must be restored if partition will be
3454                                    changed */
3455                                 i = !STp->can_partitions ||
3456                                     (STp->new_partition != STp->partition);
3457                         } else {
3458                                 i = mtc.mt_op == MTREW || mtc.mt_op == MTOFFL ||
3459                                     mtc.mt_op == MTRETEN || mtc.mt_op == MTEOM ||
3460                                     mtc.mt_op == MTLOCK || mtc.mt_op == MTLOAD ||
3461                                     mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM ||
3462                                     mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM ||
3463                                     mtc.mt_op == MTCOMPRESSION;
3464                         }
3465                         i = flush_buffer(STp, i);
3466                         if (i < 0) {
3467                                 retval = i;
3468                                 goto out;
3469                         }
3470                         if (STps->rw == ST_WRITING &&
3471                             (mtc.mt_op == MTREW || mtc.mt_op == MTOFFL ||
3472                              mtc.mt_op == MTSEEK ||
3473                              mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM)) {
3474                                 i = st_int_ioctl(STp, MTWEOF, 1);
3475                                 if (i < 0) {
3476                                         retval = i;
3477                                         goto out;
3478                                 }
3479                                 if (mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM)
3480                                         mtc.mt_count++;
3481                                 STps->rw = ST_IDLE;
3482                              }
3483
3484                 } else {
3485                         /*
3486                          * If there was a bus reset, block further access
3487                          * to this device.  If the user wants to rewind the tape,
3488                          * then reset the flag and allow access again.
3489                          */
3490                         if (mtc.mt_op != MTREW &&
3491                             mtc.mt_op != MTOFFL &&
3492                             mtc.mt_op != MTRETEN &&
3493                             mtc.mt_op != MTERASE &&
3494                             mtc.mt_op != MTSEEK &&
3495                             mtc.mt_op != MTEOM) {
3496                                 retval = (-EIO);
3497                                 goto out;
3498                         }
3499                         reset_state(STp);
3500                         /* remove this when the midlevel properly clears was_reset */
3501                         STp->device->was_reset = 0;
3502                 }
3503
3504                 if (mtc.mt_op != MTNOP && mtc.mt_op != MTSETBLK &&
3505                     mtc.mt_op != MTSETDENSITY && mtc.mt_op != MTWSM &&
3506                     mtc.mt_op != MTSETDRVBUFFER && mtc.mt_op != MTSETPART)
3507                         STps->rw = ST_IDLE;     /* Prevent automatic WEOF and fsf */
3508
3509                 if (mtc.mt_op == MTOFFL && STp->door_locked != ST_UNLOCKED)
3510                         do_door_lock(STp, 0);   /* Ignore result! */
3511
3512                 if (mtc.mt_op == MTSETDRVBUFFER &&
3513                     (mtc.mt_count & MT_ST_OPTIONS) != 0) {
3514                         retval = st_set_options(STp, mtc.mt_count);
3515                         goto out;
3516                 }
3517
3518                 if (mtc.mt_op == MTSETPART) {
3519                         if (!STp->can_partitions ||
3520                             mtc.mt_count < 0 || mtc.mt_count >= ST_NBR_PARTITIONS) {
3521                                 retval = (-EINVAL);
3522                                 goto out;
3523                         }
3524                         if (mtc.mt_count >= STp->nbr_partitions &&
3525                             (STp->nbr_partitions = nbr_partitions(STp)) < 0) {
3526                                 retval = (-EIO);
3527                                 goto out;
3528                         }
3529                         if (mtc.mt_count >= STp->nbr_partitions) {
3530                                 retval = (-EINVAL);
3531                                 goto out;
3532                         }
3533                         STp->new_partition = mtc.mt_count;
3534                         retval = 0;
3535                         goto out;
3536                 }
3537
3538                 if (mtc.mt_op == MTMKPART) {
3539                         if (!STp->can_partitions) {
3540                                 retval = (-EINVAL);
3541                                 goto out;
3542                         }
3543                         if ((i = st_int_ioctl(STp, MTREW, 0)) < 0 ||
3544                             (i = partition_tape(STp, mtc.mt_count)) < 0) {
3545                                 retval = i;
3546                                 goto out;
3547                         }
3548                         for (i = 0; i < ST_NBR_PARTITIONS; i++) {
3549                                 STp->ps[i].rw = ST_IDLE;
3550                                 STp->ps[i].at_sm = 0;
3551                                 STp->ps[i].last_block_valid = 0;
3552                         }
3553                         STp->partition = STp->new_partition = 0;
3554                         STp->nbr_partitions = 1;        /* Bad guess ?-) */
3555                         STps->drv_block = STps->drv_file = 0;
3556                         retval = 0;
3557                         goto out;
3558                 }
3559
3560                 if (mtc.mt_op == MTSEEK) {
3561                         i = set_location(STp, mtc.mt_count, STp->new_partition, 0);
3562                         if (!STp->can_partitions)
3563                                 STp->ps[0].rw = ST_IDLE;
3564                         retval = i;
3565                         goto out;
3566                 }
3567
3568                 if (mtc.mt_op == MTUNLOAD || mtc.mt_op == MTOFFL) {
3569                         retval = do_load_unload(STp, file, 0);
3570                         goto out;
3571                 }
3572
3573                 if (mtc.mt_op == MTLOAD) {
3574                         retval = do_load_unload(STp, file, max(1, mtc.mt_count));
3575                         goto out;
3576                 }
3577
3578                 if (mtc.mt_op == MTLOCK || mtc.mt_op == MTUNLOCK) {
3579                         retval = do_door_lock(STp, (mtc.mt_op == MTLOCK));
3580                         goto out;
3581                 }
3582
3583                 if (STp->can_partitions && STp->ready == ST_READY &&
3584                     (i = switch_partition(STp)) < 0) {
3585                         retval = i;
3586                         goto out;
3587                 }
3588
3589                 if (mtc.mt_op == MTCOMPRESSION)
3590                         retval = st_compression(STp, (mtc.mt_count & 1));
3591                 else
3592                         retval = st_int_ioctl(STp, mtc.mt_op, mtc.mt_count);
3593                 goto out;
3594         }
3595         if (!STm->defined) {
3596                 retval = (-ENXIO);
3597                 goto out;
3598         }
3599
3600         if ((i = flush_buffer(STp, 0)) < 0) {
3601                 retval = i;
3602                 goto out;
3603         }
3604         if (STp->can_partitions &&
3605             (i = switch_partition(STp)) < 0) {
3606                 retval = i;
3607                 goto out;
3608         }
3609
3610         if (cmd_type == _IOC_TYPE(MTIOCGET) && cmd_nr == _IOC_NR(MTIOCGET)) {
3611                 struct mtget mt_status;
3612
3613                 if (_IOC_SIZE(cmd_in) != sizeof(struct mtget)) {
3614                          retval = (-EINVAL);
3615                          goto out;
3616                 }
3617
3618                 mt_status.mt_type = STp->tape_type;
3619                 mt_status.mt_dsreg =
3620                     ((STp->block_size << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK) |
3621                     ((STp->density << MT_ST_DENSITY_SHIFT) & MT_ST_DENSITY_MASK);
3622                 mt_status.mt_blkno = STps->drv_block;
3623                 mt_status.mt_fileno = STps->drv_file;
3624                 if (STp->block_size != 0) {
3625                         if (STps->rw == ST_WRITING)
3626                                 mt_status.mt_blkno +=
3627                                     (STp->buffer)->buffer_bytes / STp->block_size;
3628                         else if (STps->rw == ST_READING)
3629                                 mt_status.mt_blkno -=
3630                                         ((STp->buffer)->buffer_bytes +
3631                                          STp->block_size - 1) / STp->block_size;
3632                 }
3633
3634                 mt_status.mt_gstat = 0;
3635                 if (STp->drv_write_prot)
3636                         mt_status.mt_gstat |= GMT_WR_PROT(0xffffffff);
3637                 if (mt_status.mt_blkno == 0) {
3638                         if (mt_status.mt_fileno == 0)
3639                                 mt_status.mt_gstat |= GMT_BOT(0xffffffff);
3640                         else
3641                                 mt_status.mt_gstat |= GMT_EOF(0xffffffff);
3642                 }
3643                 mt_status.mt_erreg = (STp->recover_reg << MT_ST_SOFTERR_SHIFT);
3644                 mt_status.mt_resid = STp->partition;
3645                 if (STps->eof == ST_EOM_OK || STps->eof == ST_EOM_ERROR)
3646                         mt_status.mt_gstat |= GMT_EOT(0xffffffff);
3647                 else if (STps->eof >= ST_EOM_OK)
3648                         mt_status.mt_gstat |= GMT_EOD(0xffffffff);
3649                 if (STp->density == 1)
3650                         mt_status.mt_gstat |= GMT_D_800(0xffffffff);
3651                 else if (STp->density == 2)
3652                         mt_status.mt_gstat |= GMT_D_1600(0xffffffff);
3653                 else if (STp->density == 3)
3654                         mt_status.mt_gstat |= GMT_D_6250(0xffffffff);
3655                 if (STp->ready == ST_READY)
3656                         mt_status.mt_gstat |= GMT_ONLINE(0xffffffff);
3657                 if (STp->ready == ST_NO_TAPE)
3658                         mt_status.mt_gstat |= GMT_DR_OPEN(0xffffffff);
3659                 if (STps->at_sm)
3660                         mt_status.mt_gstat |= GMT_SM(0xffffffff);
3661                 if (STm->do_async_writes ||
3662                     (STm->do_buffer_writes && STp->block_size != 0) ||
3663                     STp->drv_buffer != 0)
3664                         mt_status.mt_gstat |= GMT_IM_REP_EN(0xffffffff);
3665                 if (STp->cleaning_req)
3666                         mt_status.mt_gstat |= GMT_CLN(0xffffffff);
3667
3668                 i = copy_to_user(p, &mt_status, sizeof(struct mtget));
3669                 if (i) {
3670                         retval = (-EFAULT);
3671                         goto out;
3672                 }
3673
3674                 STp->recover_reg = 0;           /* Clear after read */
3675                 retval = 0;
3676                 goto out;
3677         }                       /* End of MTIOCGET */
3678         if (cmd_type == _IOC_TYPE(MTIOCPOS) && cmd_nr == _IOC_NR(MTIOCPOS)) {
3679                 struct mtpos mt_pos;
3680                 if (_IOC_SIZE(cmd_in) != sizeof(struct mtpos)) {
3681                          retval = (-EINVAL);
3682                          goto out;
3683                 }
3684                 if ((i = get_location(STp, &blk, &bt, 0)) < 0) {
3685                         retval = i;
3686                         goto out;
3687                 }
3688                 mt_pos.mt_blkno = blk;
3689                 i = copy_to_user(p, &mt_pos, sizeof(struct mtpos));
3690                 if (i)
3691                         retval = (-EFAULT);
3692                 goto out;
3693         }
3694         mutex_unlock(&STp->lock);
3695         switch (cmd_in) {
3696                 case SCSI_IOCTL_GET_IDLUN:
3697                 case SCSI_IOCTL_GET_BUS_NUMBER:
3698                         break;
3699                 default:
3700                         if ((cmd_in == SG_IO ||
3701                              cmd_in == SCSI_IOCTL_SEND_COMMAND ||
3702                              cmd_in == CDROM_SEND_PACKET) &&
3703                             !capable(CAP_SYS_RAWIO))
3704                                 i = -EPERM;
3705                         else
3706                                 i = scsi_cmd_ioctl(STp->disk->queue, STp->disk,
3707                                                    file->f_mode, cmd_in, p);
3708                         if (i != -ENOTTY)
3709                                 return i;
3710                         break;
3711         }
3712         retval = scsi_ioctl(STp->device, cmd_in, p);
3713         if (!retval && cmd_in == SCSI_IOCTL_STOP_UNIT) { /* unload */
3714                 STp->rew_at_close = 0;
3715                 STp->ready = ST_NO_TAPE;
3716         }
3717         return retval;
3718
3719  out:
3720         mutex_unlock(&STp->lock);
3721         return retval;
3722 }
3723
3724 #ifdef CONFIG_COMPAT
3725 static long st_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
3726 {
3727         struct scsi_tape *STp = file->private_data;
3728         struct scsi_device *sdev = STp->device;
3729         int ret = -ENOIOCTLCMD;
3730         if (sdev->host->hostt->compat_ioctl) {
3731
3732                 ret = sdev->host->hostt->compat_ioctl(sdev, cmd, (void __user *)arg);
3733
3734         }
3735         return ret;
3736 }
3737 #endif
3738
3739 \f
3740
3741 /* Try to allocate a new tape buffer. Calling function must not hold
3742    dev_arr_lock. */
3743 static struct st_buffer *new_tape_buffer(int need_dma, int max_sg)
3744 {
3745         struct st_buffer *tb;
3746
3747         tb = kzalloc(sizeof(struct st_buffer), GFP_ATOMIC);
3748         if (!tb) {
3749                 printk(KERN_NOTICE "st: Can't allocate new tape buffer.\n");
3750                 return NULL;
3751         }
3752         tb->frp_segs = tb->orig_frp_segs = 0;
3753         tb->use_sg = max_sg;
3754         tb->dma = need_dma;
3755         tb->buffer_size = 0;
3756
3757         tb->reserved_pages = kzalloc(max_sg * sizeof(struct page *),
3758                                      GFP_ATOMIC);
3759         if (!tb->reserved_pages) {
3760                 kfree(tb);
3761                 return NULL;
3762         }
3763
3764         return tb;
3765 }
3766
3767
3768 /* Try to allocate enough space in the tape buffer */
3769 static int enlarge_buffer(struct st_buffer * STbuffer, int new_size, int need_dma)
3770 {
3771         int segs, nbr, max_segs, b_size, order, got;
3772         gfp_t priority;
3773
3774         if (new_size <= STbuffer->buffer_size)
3775                 return 1;
3776
3777         if (STbuffer->buffer_size <= PAGE_SIZE)
3778                 normalize_buffer(STbuffer);  /* Avoid extra segment */
3779
3780         max_segs = STbuffer->use_sg;
3781         nbr = max_segs - STbuffer->frp_segs;
3782         if (nbr <= 0)
3783                 return 0;
3784
3785         priority = GFP_KERNEL | __GFP_NOWARN;
3786         if (need_dma)
3787                 priority |= GFP_DMA;
3788
3789         if (STbuffer->cleared)
3790                 priority |= __GFP_ZERO;
3791
3792         if (STbuffer->frp_segs) {
3793                 order = STbuffer->map_data.page_order;
3794                 b_size = PAGE_SIZE << order;
3795         } else {
3796                 for (b_size = PAGE_SIZE, order = 0;
3797                      order <= 6 && b_size < new_size; order++, b_size *= 2)
3798                         ;  /* empty */
3799         }
3800
3801         for (segs = STbuffer->frp_segs, got = STbuffer->buffer_size;
3802              segs < max_segs && got < new_size;) {
3803                 struct page *page;
3804
3805                 page = alloc_pages(priority, order);
3806                 if (!page) {
3807                         DEB(STbuffer->buffer_size = got);
3808                         normalize_buffer(STbuffer);
3809                         return 0;
3810                 }
3811
3812                 STbuffer->frp_segs += 1;
3813                 got += b_size;
3814                 STbuffer->buffer_size = got;
3815                 STbuffer->reserved_pages[segs] = page;
3816                 segs++;
3817         }
3818         STbuffer->b_data = page_address(STbuffer->reserved_pages[0]);
3819         STbuffer->map_data.page_order = order;
3820
3821         return 1;
3822 }
3823
3824
3825 /* Make sure that no data from previous user is in the internal buffer */
3826 static void clear_buffer(struct st_buffer * st_bp)
3827 {
3828         int i;
3829
3830         for (i=0; i < st_bp->frp_segs; i++)
3831                 memset(page_address(st_bp->reserved_pages[i]), 0,
3832                        PAGE_SIZE << st_bp->map_data.page_order);
3833         st_bp->cleared = 1;
3834 }
3835
3836
3837 /* Release the extra buffer */
3838 static void normalize_buffer(struct st_buffer * STbuffer)
3839 {
3840         int i, order = STbuffer->map_data.page_order;
3841
3842         for (i = STbuffer->orig_frp_segs; i < STbuffer->frp_segs; i++) {
3843                 __free_pages(STbuffer->reserved_pages[i], order);
3844                 STbuffer->buffer_size -= (PAGE_SIZE << order);
3845         }
3846         STbuffer->frp_segs = STbuffer->orig_frp_segs;
3847         STbuffer->frp_sg_current = 0;
3848         STbuffer->sg_segs = 0;
3849         STbuffer->map_data.page_order = 0;
3850         STbuffer->map_data.offset = 0;
3851 }
3852
3853
3854 /* Move data from the user buffer to the tape buffer. Returns zero (success) or
3855    negative error code. */
3856 static int append_to_buffer(const char __user *ubp, struct st_buffer * st_bp, int do_count)
3857 {
3858         int i, cnt, res, offset;
3859         int length = PAGE_SIZE << st_bp->map_data.page_order;
3860
3861         for (i = 0, offset = st_bp->buffer_bytes;
3862              i < st_bp->frp_segs && offset >= length; i++)
3863                 offset -= length;
3864         if (i == st_bp->frp_segs) {     /* Should never happen */
3865                 printk(KERN_WARNING "st: append_to_buffer offset overflow.\n");
3866                 return (-EIO);
3867         }
3868         for (; i < st_bp->frp_segs && do_count > 0; i++) {
3869                 struct page *page = st_bp->reserved_pages[i];
3870                 cnt = length - offset < do_count ? length - offset : do_count;
3871                 res = copy_from_user(page_address(page) + offset, ubp, cnt);
3872                 if (res)
3873                         return (-EFAULT);
3874                 do_count -= cnt;
3875                 st_bp->buffer_bytes += cnt;
3876                 ubp += cnt;
3877                 offset = 0;
3878         }
3879         if (do_count) /* Should never happen */
3880                 return (-EIO);
3881
3882         return 0;
3883 }
3884
3885
3886 /* Move data from the tape buffer to the user buffer. Returns zero (success) or
3887    negative error code. */
3888 static int from_buffer(struct st_buffer * st_bp, char __user *ubp, int do_count)
3889 {
3890         int i, cnt, res, offset;
3891         int length = PAGE_SIZE << st_bp->map_data.page_order;
3892
3893         for (i = 0, offset = st_bp->read_pointer;
3894              i < st_bp->frp_segs && offset >= length; i++)
3895                 offset -= length;
3896         if (i == st_bp->frp_segs) {     /* Should never happen */
3897                 printk(KERN_WARNING "st: from_buffer offset overflow.\n");
3898                 return (-EIO);
3899         }
3900         for (; i < st_bp->frp_segs && do_count > 0; i++) {
3901                 struct page *page = st_bp->reserved_pages[i];
3902                 cnt = length - offset < do_count ? length - offset : do_count;
3903                 res = copy_to_user(ubp, page_address(page) + offset, cnt);
3904                 if (res)
3905                         return (-EFAULT);
3906                 do_count -= cnt;
3907                 st_bp->buffer_bytes -= cnt;
3908                 st_bp->read_pointer += cnt;
3909                 ubp += cnt;
3910                 offset = 0;
3911         }
3912         if (do_count) /* Should never happen */
3913                 return (-EIO);
3914
3915         return 0;
3916 }
3917
3918
3919 /* Move data towards start of buffer */
3920 static void move_buffer_data(struct st_buffer * st_bp, int offset)
3921 {
3922         int src_seg, dst_seg, src_offset = 0, dst_offset;
3923         int count, total;
3924         int length = PAGE_SIZE << st_bp->map_data.page_order;
3925
3926         if (offset == 0)
3927                 return;
3928
3929         total=st_bp->buffer_bytes - offset;
3930         for (src_seg=0; src_seg < st_bp->frp_segs; src_seg++) {
3931                 src_offset = offset;
3932                 if (src_offset < length)
3933                         break;
3934                 offset -= length;
3935         }
3936
3937         st_bp->buffer_bytes = st_bp->read_pointer = total;
3938         for (dst_seg=dst_offset=0; total > 0; ) {
3939                 struct page *dpage = st_bp->reserved_pages[dst_seg];
3940                 struct page *spage = st_bp->reserved_pages[src_seg];
3941
3942                 count = min(length - dst_offset, length - src_offset);
3943                 memmove(page_address(dpage) + dst_offset,
3944                         page_address(spage) + src_offset, count);
3945                 src_offset += count;
3946                 if (src_offset >= length) {
3947                         src_seg++;
3948                         src_offset = 0;
3949                 }
3950                 dst_offset += count;
3951                 if (dst_offset >= length) {
3952                         dst_seg++;
3953                         dst_offset = 0;
3954                 }
3955                 total -= count;
3956         }
3957 }
3958
3959 /* Validate the options from command line or module parameters */
3960 static void validate_options(void)
3961 {
3962         if (buffer_kbs > 0)
3963                 st_fixed_buffer_size = buffer_kbs * ST_KILOBYTE;
3964         if (max_sg_segs >= ST_FIRST_SG)
3965                 st_max_sg_segs = max_sg_segs;
3966 }
3967
3968 #ifndef MODULE
3969 /* Set the boot options. Syntax is defined in Documenation/scsi/st.txt.
3970  */
3971 static int __init st_setup(char *str)
3972 {
3973         int i, len, ints[5];
3974         char *stp;
3975
3976         stp = get_options(str, ARRAY_SIZE(ints), ints);
3977
3978         if (ints[0] > 0) {
3979                 for (i = 0; i < ints[0] && i < ARRAY_SIZE(parms); i++)
3980                         if (parms[i].val)
3981                                 *parms[i].val = ints[i + 1];
3982         } else {
3983                 while (stp != NULL) {
3984                         for (i = 0; i < ARRAY_SIZE(parms); i++) {
3985                                 len = strlen(parms[i].name);
3986                                 if (!strncmp(stp, parms[i].name, len) &&
3987                                     (*(stp + len) == ':' || *(stp + len) == '=')) {
3988                                         if (parms[i].val)
3989                                                 *parms[i].val =
3990                                                         simple_strtoul(stp + len + 1, NULL, 0);
3991                                         else
3992                                                 printk(KERN_WARNING "st: Obsolete parameter %s\n",
3993                                                        parms[i].name);
3994                                         break;
3995                                 }
3996                         }
3997                         if (i >= ARRAY_SIZE(parms))
3998                                  printk(KERN_WARNING "st: invalid parameter in '%s'\n",
3999                                         stp);
4000                         stp = strchr(stp, ',');
4001                         if (stp)
4002                                 stp++;
4003                 }
4004         }
4005
4006         validate_options();
4007
4008         return 1;
4009 }
4010
4011 __setup("st=", st_setup);
4012
4013 #endif
4014
4015 static const struct file_operations st_fops =
4016 {
4017         .owner =        THIS_MODULE,
4018         .read =         st_read,
4019         .write =        st_write,
4020         .unlocked_ioctl = st_ioctl,
4021 #ifdef CONFIG_COMPAT
4022         .compat_ioctl = st_compat_ioctl,
4023 #endif
4024         .open =         st_open,
4025         .flush =        st_flush,
4026         .release =      st_release,
4027 };
4028
4029 static int st_probe(struct device *dev)
4030 {
4031         struct scsi_device *SDp = to_scsi_device(dev);
4032         struct gendisk *disk = NULL;
4033         struct cdev *cdev = NULL;
4034         struct scsi_tape *tpnt = NULL;
4035         struct st_modedef *STm;
4036         struct st_partstat *STps;
4037         struct st_buffer *buffer;
4038         int i, j, mode, dev_num, error;
4039         char *stp;
4040
4041         if (SDp->type != TYPE_TAPE)
4042                 return -ENODEV;
4043         if ((stp = st_incompatible(SDp))) {
4044                 sdev_printk(KERN_INFO, SDp, "Found incompatible tape\n");
4045                 printk(KERN_INFO "st: The suggested driver is %s.\n", stp);
4046                 return -ENODEV;
4047         }
4048
4049         i = min(SDp->request_queue->max_hw_segments,
4050                 SDp->request_queue->max_phys_segments);
4051         if (st_max_sg_segs < i)
4052                 i = st_max_sg_segs;
4053         buffer = new_tape_buffer((SDp->host)->unchecked_isa_dma, i);
4054         if (buffer == NULL) {
4055                 printk(KERN_ERR
4056                        "st: Can't allocate new tape buffer. Device not attached.\n");
4057                 goto out;
4058         }
4059
4060         disk = alloc_disk(1);
4061         if (!disk) {
4062                 printk(KERN_ERR "st: out of memory. Device not attached.\n");
4063                 goto out_buffer_free;
4064         }
4065
4066         write_lock(&st_dev_arr_lock);
4067         if (st_nr_dev >= st_dev_max) {
4068                 struct scsi_tape **tmp_da;
4069                 int tmp_dev_max;
4070
4071                 tmp_dev_max = max(st_nr_dev * 2, 8);
4072                 if (tmp_dev_max > ST_MAX_TAPES)
4073                         tmp_dev_max = ST_MAX_TAPES;
4074                 if (tmp_dev_max <= st_nr_dev) {
4075                         write_unlock(&st_dev_arr_lock);
4076                         printk(KERN_ERR "st: Too many tape devices (max. %d).\n",
4077                                ST_MAX_TAPES);
4078                         goto out_put_disk;
4079                 }
4080
4081                 tmp_da = kzalloc(tmp_dev_max * sizeof(struct scsi_tape *), GFP_ATOMIC);
4082                 if (tmp_da == NULL) {
4083                         write_unlock(&st_dev_arr_lock);
4084                         printk(KERN_ERR "st: Can't extend device array.\n");
4085                         goto out_put_disk;
4086                 }
4087
4088                 if (scsi_tapes != NULL) {
4089                         memcpy(tmp_da, scsi_tapes,
4090                                st_dev_max * sizeof(struct scsi_tape *));
4091                         kfree(scsi_tapes);
4092                 }
4093                 scsi_tapes = tmp_da;
4094
4095                 st_dev_max = tmp_dev_max;
4096         }
4097
4098         for (i = 0; i < st_dev_max; i++)
4099                 if (scsi_tapes[i] == NULL)
4100                         break;
4101         if (i >= st_dev_max)
4102                 panic("scsi_devices corrupt (st)");
4103
4104         tpnt = kzalloc(sizeof(struct scsi_tape), GFP_ATOMIC);
4105         if (tpnt == NULL) {
4106                 write_unlock(&st_dev_arr_lock);
4107                 printk(KERN_ERR "st: Can't allocate device descriptor.\n");
4108                 goto out_put_disk;
4109         }
4110         kref_init(&tpnt->kref);
4111         tpnt->disk = disk;
4112         sprintf(disk->disk_name, "st%d", i);
4113         disk->private_data = &tpnt->driver;
4114         disk->queue = SDp->request_queue;
4115         tpnt->driver = &st_template;
4116         scsi_tapes[i] = tpnt;
4117         dev_num = i;
4118
4119         tpnt->device = SDp;
4120         if (SDp->scsi_level <= 2)
4121                 tpnt->tape_type = MT_ISSCSI1;
4122         else
4123                 tpnt->tape_type = MT_ISSCSI2;
4124
4125         tpnt->buffer = buffer;
4126         tpnt->buffer->last_SRpnt = NULL;
4127
4128         tpnt->inited = 0;
4129         tpnt->dirty = 0;
4130         tpnt->in_use = 0;
4131         tpnt->drv_buffer = 1;   /* Try buffering if no mode sense */
4132         tpnt->restr_dma = (SDp->host)->unchecked_isa_dma;
4133         tpnt->use_pf = (SDp->scsi_level >= SCSI_2);
4134         tpnt->density = 0;
4135         tpnt->do_auto_lock = ST_AUTO_LOCK;
4136         tpnt->can_bsr = (SDp->scsi_level > 2 ? 1 : ST_IN_FILE_POS); /* BSR mandatory in SCSI3 */
4137         tpnt->can_partitions = 0;
4138         tpnt->two_fm = ST_TWO_FM;
4139         tpnt->fast_mteom = ST_FAST_MTEOM;
4140         tpnt->scsi2_logical = ST_SCSI2LOGICAL;
4141         tpnt->sili = ST_SILI;
4142         tpnt->immediate = ST_NOWAIT;
4143         tpnt->default_drvbuffer = 0xff;         /* No forced buffering */
4144         tpnt->partition = 0;
4145         tpnt->new_partition = 0;
4146         tpnt->nbr_partitions = 0;
4147         blk_queue_rq_timeout(tpnt->device->request_queue, ST_TIMEOUT);
4148         tpnt->long_timeout = ST_LONG_TIMEOUT;
4149         tpnt->try_dio = try_direct_io && !SDp->host->unchecked_isa_dma;
4150
4151         for (i = 0; i < ST_NBR_MODES; i++) {
4152                 STm = &(tpnt->modes[i]);
4153                 STm->defined = 0;
4154                 STm->sysv = ST_SYSV;
4155                 STm->defaults_for_writes = 0;
4156                 STm->do_async_writes = ST_ASYNC_WRITES;
4157                 STm->do_buffer_writes = ST_BUFFER_WRITES;
4158                 STm->do_read_ahead = ST_READ_AHEAD;
4159                 STm->default_compression = ST_DONT_TOUCH;
4160                 STm->default_blksize = (-1);    /* No forced size */
4161                 STm->default_density = (-1);    /* No forced density */
4162         }
4163
4164         for (i = 0; i < ST_NBR_PARTITIONS; i++) {
4165                 STps = &(tpnt->ps[i]);
4166                 STps->rw = ST_IDLE;
4167                 STps->eof = ST_NOEOF;
4168                 STps->at_sm = 0;
4169                 STps->last_block_valid = 0;
4170                 STps->drv_block = (-1);
4171                 STps->drv_file = (-1);
4172         }
4173
4174         tpnt->current_mode = 0;
4175         tpnt->modes[0].defined = 1;
4176
4177         tpnt->density_changed = tpnt->compression_changed =
4178             tpnt->blksize_changed = 0;
4179         mutex_init(&tpnt->lock);
4180
4181         st_nr_dev++;
4182         write_unlock(&st_dev_arr_lock);
4183
4184         for (mode = 0; mode < ST_NBR_MODES; ++mode) {
4185                 STm = &(tpnt->modes[mode]);
4186                 for (j=0; j < 2; j++) {
4187                         cdev = cdev_alloc();
4188                         if (!cdev) {
4189                                 printk(KERN_ERR
4190                                        "st%d: out of memory. Device not attached.\n",
4191                                        dev_num);
4192                                 goto out_free_tape;
4193                         }
4194                         cdev->owner = THIS_MODULE;
4195                         cdev->ops = &st_fops;
4196
4197                         error = cdev_add(cdev,
4198                                          MKDEV(SCSI_TAPE_MAJOR, TAPE_MINOR(dev_num, mode, j)),
4199                                          1);
4200                         if (error) {
4201                                 printk(KERN_ERR "st%d: Can't add %s-rewind mode %d\n",
4202                                        dev_num, j ? "non" : "auto", mode);
4203                                 printk(KERN_ERR "st%d: Device not attached.\n", dev_num);
4204                                 goto out_free_tape;
4205                         }
4206                         STm->cdevs[j] = cdev;
4207
4208                 }
4209                 error = do_create_class_files(tpnt, dev_num, mode);
4210                 if (error)
4211                         goto out_free_tape;
4212         }
4213
4214         sdev_printk(KERN_NOTICE, SDp,
4215                     "Attached scsi tape %s\n", tape_name(tpnt));
4216         sdev_printk(KERN_INFO, SDp, "%s: try direct i/o: %s (alignment %d B)\n",
4217                     tape_name(tpnt), tpnt->try_dio ? "yes" : "no",
4218                     queue_dma_alignment(SDp->request_queue) + 1);
4219
4220         return 0;
4221
4222 out_free_tape:
4223         for (mode=0; mode < ST_NBR_MODES; mode++) {
4224                 STm = &(tpnt->modes[mode]);
4225                 sysfs_remove_link(&tpnt->device->sdev_gendev.kobj,
4226                                   "tape");
4227                 for (j=0; j < 2; j++) {
4228                         if (STm->cdevs[j]) {
4229                                 if (cdev == STm->cdevs[j])
4230                                         cdev = NULL;
4231                                         device_destroy(st_sysfs_class,
4232                                                        MKDEV(SCSI_TAPE_MAJOR,
4233                                                              TAPE_MINOR(i, mode, j)));
4234                                 cdev_del(STm->cdevs[j]);
4235                         }
4236                 }
4237         }
4238         if (cdev)
4239                 cdev_del(cdev);
4240         write_lock(&st_dev_arr_lock);
4241         scsi_tapes[dev_num] = NULL;
4242         st_nr_dev--;
4243         write_unlock(&st_dev_arr_lock);
4244 out_put_disk:
4245         put_disk(disk);
4246         kfree(tpnt);
4247 out_buffer_free:
4248         kfree(buffer);
4249 out:
4250         return -ENODEV;
4251 };
4252
4253
4254 static int st_remove(struct device *dev)
4255 {
4256         struct scsi_device *SDp = to_scsi_device(dev);
4257         struct scsi_tape *tpnt;
4258         int i, j, mode;
4259
4260         write_lock(&st_dev_arr_lock);
4261         for (i = 0; i < st_dev_max; i++) {
4262                 tpnt = scsi_tapes[i];
4263                 if (tpnt != NULL && tpnt->device == SDp) {
4264                         scsi_tapes[i] = NULL;
4265                         st_nr_dev--;
4266                         write_unlock(&st_dev_arr_lock);
4267                         sysfs_remove_link(&tpnt->device->sdev_gendev.kobj,
4268                                           "tape");
4269                         for (mode = 0; mode < ST_NBR_MODES; ++mode) {
4270                                 for (j=0; j < 2; j++) {
4271                                         device_destroy(st_sysfs_class,
4272                                                        MKDEV(SCSI_TAPE_MAJOR,
4273                                                              TAPE_MINOR(i, mode, j)));
4274                                         cdev_del(tpnt->modes[mode].cdevs[j]);
4275                                         tpnt->modes[mode].cdevs[j] = NULL;
4276                                 }
4277                         }
4278
4279                         mutex_lock(&st_ref_mutex);
4280                         kref_put(&tpnt->kref, scsi_tape_release);
4281                         mutex_unlock(&st_ref_mutex);
4282                         return 0;
4283                 }
4284         }
4285
4286         write_unlock(&st_dev_arr_lock);
4287         return 0;
4288 }
4289
4290 /**
4291  *      scsi_tape_release - Called to free the Scsi_Tape structure
4292  *      @kref: pointer to embedded kref
4293  *
4294  *      st_ref_mutex must be held entering this routine.  Because it is
4295  *      called on last put, you should always use the scsi_tape_get()
4296  *      scsi_tape_put() helpers which manipulate the semaphore directly
4297  *      and never do a direct kref_put().
4298  **/
4299 static void scsi_tape_release(struct kref *kref)
4300 {
4301         struct scsi_tape *tpnt = to_scsi_tape(kref);
4302         struct gendisk *disk = tpnt->disk;
4303
4304         tpnt->device = NULL;
4305
4306         if (tpnt->buffer) {
4307                 tpnt->buffer->orig_frp_segs = 0;
4308                 normalize_buffer(tpnt->buffer);
4309                 kfree(tpnt->buffer->reserved_pages);
4310                 kfree(tpnt->buffer);
4311         }
4312
4313         disk->private_data = NULL;
4314         put_disk(disk);
4315         kfree(tpnt);
4316         return;
4317 }
4318
4319 static int __init init_st(void)
4320 {
4321         int err;
4322
4323         validate_options();
4324
4325         printk(KERN_INFO "st: Version %s, fixed bufsize %d, s/g segs %d\n",
4326                 verstr, st_fixed_buffer_size, st_max_sg_segs);
4327
4328         st_sysfs_class = class_create(THIS_MODULE, "scsi_tape");
4329         if (IS_ERR(st_sysfs_class)) {
4330                 printk(KERN_ERR "Unable create sysfs class for SCSI tapes\n");
4331                 return PTR_ERR(st_sysfs_class);
4332         }
4333
4334         err = register_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0),
4335                                      ST_MAX_TAPE_ENTRIES, "st");
4336         if (err) {
4337                 printk(KERN_ERR "Unable to get major %d for SCSI tapes\n",
4338                        SCSI_TAPE_MAJOR);
4339                 goto err_class;
4340         }
4341
4342         err = scsi_register_driver(&st_template.gendrv);
4343         if (err)
4344                 goto err_chrdev;
4345
4346         err = do_create_sysfs_files();
4347         if (err)
4348                 goto err_scsidrv;
4349
4350         return 0;
4351
4352 err_scsidrv:
4353         scsi_unregister_driver(&st_template.gendrv);
4354 err_chrdev:
4355         unregister_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0),
4356                                  ST_MAX_TAPE_ENTRIES);
4357 err_class:
4358         class_destroy(st_sysfs_class);
4359         return err;
4360 }
4361
4362 static void __exit exit_st(void)
4363 {
4364         do_remove_sysfs_files();
4365         scsi_unregister_driver(&st_template.gendrv);
4366         unregister_chrdev_region(MKDEV(SCSI_TAPE_MAJOR, 0),
4367                                  ST_MAX_TAPE_ENTRIES);
4368         class_destroy(st_sysfs_class);
4369         kfree(scsi_tapes);
4370         printk(KERN_INFO "st: Unloaded.\n");
4371 }
4372
4373 module_init(init_st);
4374 module_exit(exit_st);
4375
4376
4377 /* The sysfs driver interface. Read-only at the moment */
4378 static ssize_t st_try_direct_io_show(struct device_driver *ddp, char *buf)
4379 {
4380         return snprintf(buf, PAGE_SIZE, "%d\n", try_direct_io);
4381 }
4382 static DRIVER_ATTR(try_direct_io, S_IRUGO, st_try_direct_io_show, NULL);
4383
4384 static ssize_t st_fixed_buffer_size_show(struct device_driver *ddp, char *buf)
4385 {
4386         return snprintf(buf, PAGE_SIZE, "%d\n", st_fixed_buffer_size);
4387 }
4388 static DRIVER_ATTR(fixed_buffer_size, S_IRUGO, st_fixed_buffer_size_show, NULL);
4389
4390 static ssize_t st_max_sg_segs_show(struct device_driver *ddp, char *buf)
4391 {
4392         return snprintf(buf, PAGE_SIZE, "%d\n", st_max_sg_segs);
4393 }
4394 static DRIVER_ATTR(max_sg_segs, S_IRUGO, st_max_sg_segs_show, NULL);
4395
4396 static ssize_t st_version_show(struct device_driver *ddd, char *buf)
4397 {
4398         return snprintf(buf, PAGE_SIZE, "[%s]\n", verstr);
4399 }
4400 static DRIVER_ATTR(version, S_IRUGO, st_version_show, NULL);
4401
4402 static int do_create_sysfs_files(void)
4403 {
4404         struct device_driver *sysfs = &st_template.gendrv;
4405         int err;
4406
4407         err = driver_create_file(sysfs, &driver_attr_try_direct_io);
4408         if (err)
4409                 return err;
4410         err = driver_create_file(sysfs, &driver_attr_fixed_buffer_size);
4411         if (err)
4412                 goto err_try_direct_io;
4413         err = driver_create_file(sysfs, &driver_attr_max_sg_segs);
4414         if (err)
4415                 goto err_attr_fixed_buf;
4416         err = driver_create_file(sysfs, &driver_attr_version);
4417         if (err)
4418                 goto err_attr_max_sg;
4419
4420         return 0;
4421
4422 err_attr_max_sg:
4423         driver_remove_file(sysfs, &driver_attr_max_sg_segs);
4424 err_attr_fixed_buf:
4425         driver_remove_file(sysfs, &driver_attr_fixed_buffer_size);
4426 err_try_direct_io:
4427         driver_remove_file(sysfs, &driver_attr_try_direct_io);
4428         return err;
4429 }
4430
4431 static void do_remove_sysfs_files(void)
4432 {
4433         struct device_driver *sysfs = &st_template.gendrv;
4434
4435         driver_remove_file(sysfs, &driver_attr_version);
4436         driver_remove_file(sysfs, &driver_attr_max_sg_segs);
4437         driver_remove_file(sysfs, &driver_attr_fixed_buffer_size);
4438         driver_remove_file(sysfs, &driver_attr_try_direct_io);
4439 }
4440
4441
4442 /* The sysfs simple class interface */
4443 static ssize_t
4444 st_defined_show(struct device *dev, struct device_attribute *attr, char *buf)
4445 {
4446         struct st_modedef *STm = dev_get_drvdata(dev);
4447         ssize_t l = 0;
4448
4449         l = snprintf(buf, PAGE_SIZE, "%d\n", STm->defined);
4450         return l;
4451 }
4452
4453 DEVICE_ATTR(defined, S_IRUGO, st_defined_show, NULL);
4454
4455 static ssize_t
4456 st_defblk_show(struct device *dev, struct device_attribute *attr, char *buf)
4457 {
4458         struct st_modedef *STm = dev_get_drvdata(dev);
4459         ssize_t l = 0;
4460
4461         l = snprintf(buf, PAGE_SIZE, "%d\n", STm->default_blksize);
4462         return l;
4463 }
4464
4465 DEVICE_ATTR(default_blksize, S_IRUGO, st_defblk_show, NULL);
4466
4467 static ssize_t
4468 st_defdensity_show(struct device *dev, struct device_attribute *attr, char *buf)
4469 {
4470         struct st_modedef *STm = dev_get_drvdata(dev);
4471         ssize_t l = 0;
4472         char *fmt;
4473
4474         fmt = STm->default_density >= 0 ? "0x%02x\n" : "%d\n";
4475         l = snprintf(buf, PAGE_SIZE, fmt, STm->default_density);
4476         return l;
4477 }
4478
4479 DEVICE_ATTR(default_density, S_IRUGO, st_defdensity_show, NULL);
4480
4481 static ssize_t
4482 st_defcompression_show(struct device *dev, struct device_attribute *attr,
4483                        char *buf)
4484 {
4485         struct st_modedef *STm = dev_get_drvdata(dev);
4486         ssize_t l = 0;
4487
4488         l = snprintf(buf, PAGE_SIZE, "%d\n", STm->default_compression - 1);
4489         return l;
4490 }
4491
4492 DEVICE_ATTR(default_compression, S_IRUGO, st_defcompression_show, NULL);
4493
4494 static ssize_t
4495 st_options_show(struct device *dev, struct device_attribute *attr, char *buf)
4496 {
4497         struct st_modedef *STm = dev_get_drvdata(dev);
4498         struct scsi_tape *STp;
4499         int i, j, options;
4500         ssize_t l = 0;
4501
4502         for (i=0; i < st_dev_max; i++) {
4503                 for (j=0; j < ST_NBR_MODES; j++)
4504                         if (&scsi_tapes[i]->modes[j] == STm)
4505                                 break;
4506                 if (j < ST_NBR_MODES)
4507                         break;
4508         }
4509         if (i == st_dev_max)
4510                 return 0;  /* should never happen */
4511
4512         STp = scsi_tapes[i];
4513
4514         options = STm->do_buffer_writes ? MT_ST_BUFFER_WRITES : 0;
4515         options |= STm->do_async_writes ? MT_ST_ASYNC_WRITES : 0;
4516         options |= STm->do_read_ahead ? MT_ST_READ_AHEAD : 0;
4517         DEB( options |= debugging ? MT_ST_DEBUGGING : 0 );
4518         options |= STp->two_fm ? MT_ST_TWO_FM : 0;
4519         options |= STp->fast_mteom ? MT_ST_FAST_MTEOM : 0;
4520         options |= STm->defaults_for_writes ? MT_ST_DEF_WRITES : 0;
4521         options |= STp->can_bsr ? MT_ST_CAN_BSR : 0;
4522         options |= STp->omit_blklims ? MT_ST_NO_BLKLIMS : 0;
4523         options |= STp->can_partitions ? MT_ST_CAN_PARTITIONS : 0;
4524         options |= STp->scsi2_logical ? MT_ST_SCSI2LOGICAL : 0;
4525         options |= STm->sysv ? MT_ST_SYSV : 0;
4526         options |= STp->immediate ? MT_ST_NOWAIT : 0;
4527         options |= STp->sili ? MT_ST_SILI : 0;
4528
4529         l = snprintf(buf, PAGE_SIZE, "0x%08x\n", options);
4530         return l;
4531 }
4532
4533 DEVICE_ATTR(options, S_IRUGO, st_options_show, NULL);
4534
4535 static int do_create_class_files(struct scsi_tape *STp, int dev_num, int mode)
4536 {
4537         int i, rew, error;
4538         char name[10];
4539         struct device *st_class_member;
4540
4541         for (rew=0; rew < 2; rew++) {
4542                 /* Make sure that the minor numbers corresponding to the four
4543                    first modes always get the same names */
4544                 i = mode << (4 - ST_NBR_MODE_BITS);
4545                 snprintf(name, 10, "%s%s%s", rew ? "n" : "",
4546                          STp->disk->disk_name, st_formats[i]);
4547                 st_class_member =
4548                         device_create(st_sysfs_class, &STp->device->sdev_gendev,
4549                                       MKDEV(SCSI_TAPE_MAJOR,
4550                                             TAPE_MINOR(dev_num, mode, rew)),
4551                                       &STp->modes[mode], "%s", name);
4552                 if (IS_ERR(st_class_member)) {
4553                         printk(KERN_WARNING "st%d: device_create failed\n",
4554                                dev_num);
4555                         error = PTR_ERR(st_class_member);
4556                         goto out;
4557                 }
4558
4559                 error = device_create_file(st_class_member,
4560                                            &dev_attr_defined);
4561                 if (error) goto out;
4562                 error = device_create_file(st_class_member,
4563                                            &dev_attr_default_blksize);
4564                 if (error) goto out;
4565                 error = device_create_file(st_class_member,
4566                                            &dev_attr_default_density);
4567                 if (error) goto out;
4568                 error = device_create_file(st_class_member,
4569                                            &dev_attr_default_compression);
4570                 if (error) goto out;
4571                 error = device_create_file(st_class_member,
4572                                            &dev_attr_options);
4573                 if (error) goto out;
4574
4575                 if (mode == 0 && rew == 0) {
4576                         error = sysfs_create_link(&STp->device->sdev_gendev.kobj,
4577                                                   &st_class_member->kobj,
4578                                                   "tape");
4579                         if (error) {
4580                                 printk(KERN_ERR
4581                                        "st%d: Can't create sysfs link from SCSI device.\n",
4582                                        dev_num);
4583                                 goto out;
4584                         }
4585                 }
4586         }
4587
4588         return 0;
4589
4590 out:
4591         return error;
4592 }
4593
4594 /* The following functions may be useful for a larger audience. */
4595 static int sgl_map_user_pages(struct st_buffer *STbp,
4596                               const unsigned int max_pages, unsigned long uaddr,
4597                               size_t count, int rw)
4598 {
4599         unsigned long end = (uaddr + count + PAGE_SIZE - 1) >> PAGE_SHIFT;
4600         unsigned long start = uaddr >> PAGE_SHIFT;
4601         const int nr_pages = end - start;
4602         int res, i, j;
4603         struct page **pages;
4604         struct rq_map_data *mdata = &STbp->map_data;
4605
4606         /* User attempted Overflow! */
4607         if ((uaddr + count) < uaddr)
4608                 return -EINVAL;
4609
4610         /* Too big */
4611         if (nr_pages > max_pages)
4612                 return -ENOMEM;
4613
4614         /* Hmm? */
4615         if (count == 0)
4616                 return 0;
4617
4618         if ((pages = kmalloc(max_pages * sizeof(*pages), GFP_KERNEL)) == NULL)
4619                 return -ENOMEM;
4620
4621         /* Try to fault in all of the necessary pages */
4622         down_read(&current->mm->mmap_sem);
4623         /* rw==READ means read from drive, write into memory area */
4624         res = get_user_pages(
4625                 current,
4626                 current->mm,
4627                 uaddr,
4628                 nr_pages,
4629                 rw == READ,
4630                 0, /* don't force */
4631                 pages,
4632                 NULL);
4633         up_read(&current->mm->mmap_sem);
4634
4635         /* Errors and no page mapped should return here */
4636         if (res < nr_pages)
4637                 goto out_unmap;
4638
4639         for (i=0; i < nr_pages; i++) {
4640                 /* FIXME: flush superflous for rw==READ,
4641                  * probably wrong function for rw==WRITE
4642                  */
4643                 flush_dcache_page(pages[i]);
4644         }
4645
4646         mdata->offset = uaddr & ~PAGE_MASK;
4647         mdata->page_order = 0;
4648         STbp->mapped_pages = pages;
4649
4650         return nr_pages;
4651  out_unmap:
4652         if (res > 0) {
4653                 for (j=0; j < res; j++)
4654                         page_cache_release(pages[j]);
4655                 res = 0;
4656         }
4657         kfree(pages);
4658         return res;
4659 }
4660
4661
4662 /* And unmap them... */
4663 static int sgl_unmap_user_pages(struct st_buffer *STbp,
4664                                 const unsigned int nr_pages, int dirtied)
4665 {
4666         int i;
4667
4668         for (i=0; i < nr_pages; i++) {
4669                 struct page *page = STbp->mapped_pages[i];
4670
4671                 if (dirtied)
4672                         SetPageDirty(page);
4673                 /* FIXME: cache flush missing for rw==READ
4674                  * FIXME: call the correct reference counting function
4675                  */
4676                 page_cache_release(page);
4677         }
4678         kfree(STbp->mapped_pages);
4679         STbp->mapped_pages = NULL;
4680
4681         return 0;
4682 }