[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection
[safe/jmp/linux-2.6] / drivers / scsi / pcmcia / aha152x_stub.c
1 /*======================================================================
2
3     A driver for Adaptec AHA152X-compatible PCMCIA SCSI cards.
4
5     This driver supports the Adaptec AHA-1460, the New Media Bus
6     Toaster, and the New Media Toast & Jam.
7     
8     aha152x_cs.c 1.54 2000/06/12 21:27:25
9
10     The contents of this file are subject to the Mozilla Public
11     License Version 1.1 (the "License"); you may not use this file
12     except in compliance with the License. You may obtain a copy of
13     the License at http://www.mozilla.org/MPL/
14
15     Software distributed under the License is distributed on an "AS
16     IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
17     implied. See the License for the specific language governing
18     rights and limitations under the License.
19
20     The initial developer of the original code is David A. Hinds
21     <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
22     are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
23
24     Alternatively, the contents of this file may be used under the
25     terms of the GNU General Public License version 2 (the "GPL"), in which
26     case the provisions of the GPL are applicable instead of the
27     above.  If you wish to allow the use of your version of this file
28     only under the terms of the GPL and not to allow others to use
29     your version of this file under the MPL, indicate your decision
30     by deleting the provisions above and replace them with the notice
31     and other provisions required by the GPL.  If you do not delete
32     the provisions above, a recipient may use your version of this
33     file under either the MPL or the GPL.
34     
35 ======================================================================*/
36
37 #include <linux/module.h>
38 #include <linux/init.h>
39 #include <linux/kernel.h>
40 #include <linux/sched.h>
41 #include <linux/slab.h>
42 #include <linux/string.h>
43 #include <linux/ioport.h>
44 #include <scsi/scsi.h>
45 #include <linux/major.h>
46 #include <linux/blkdev.h>
47 #include <scsi/scsi_ioctl.h>
48
49 #include "scsi.h"
50 #include <scsi/scsi_host.h>
51 #include "aha152x.h"
52
53 #include <pcmcia/cs_types.h>
54 #include <pcmcia/cs.h>
55 #include <pcmcia/cistpl.h>
56 #include <pcmcia/ds.h>
57
58 #ifdef PCMCIA_DEBUG
59 static int pc_debug = PCMCIA_DEBUG;
60 module_param(pc_debug, int, 0644);
61 #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
62 static char *version =
63 "aha152x_cs.c 1.54 2000/06/12 21:27:25 (David Hinds)";
64 #else
65 #define DEBUG(n, args...)
66 #endif
67
68 /*====================================================================*/
69
70 /* Parameters that can be set with 'insmod' */
71
72 /* SCSI bus setup options */
73 static int host_id = 7;
74 static int reconnect = 1;
75 static int parity = 1;
76 static int synchronous = 1;
77 static int reset_delay = 100;
78 static int ext_trans = 0;
79
80 module_param(host_id, int, 0);
81 module_param(reconnect, int, 0);
82 module_param(parity, int, 0);
83 module_param(synchronous, int, 0);
84 module_param(reset_delay, int, 0);
85 module_param(ext_trans, int, 0);
86
87 MODULE_LICENSE("Dual MPL/GPL");
88
89 /*====================================================================*/
90
91 typedef struct scsi_info_t {
92         struct pcmcia_device    *p_dev;
93     dev_node_t          node;
94     struct Scsi_Host    *host;
95 } scsi_info_t;
96
97 static void aha152x_release_cs(struct pcmcia_device *link);
98 static void aha152x_detach(struct pcmcia_device *p_dev);
99 static void aha152x_config_cs(struct pcmcia_device *link);
100
101 static struct pcmcia_device *dev_list;
102
103 static int aha152x_attach(struct pcmcia_device *link)
104 {
105     scsi_info_t *info;
106
107     DEBUG(0, "aha152x_attach()\n");
108
109     /* Create new SCSI device */
110     info = kmalloc(sizeof(*info), GFP_KERNEL);
111     if (!info) return -ENOMEM;
112     memset(info, 0, sizeof(*info));
113     info->p_dev = link;
114     link->priv = info;
115
116     link->io.NumPorts1 = 0x20;
117     link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
118     link->io.IOAddrLines = 10;
119     link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
120     link->irq.IRQInfo1 = IRQ_LEVEL_ID;
121     link->conf.Attributes = CONF_ENABLE_IRQ;
122     link->conf.IntType = INT_MEMORY_AND_IO;
123     link->conf.Present = PRESENT_OPTION;
124
125     link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
126     aha152x_config_cs(link);
127
128     return 0;
129 } /* aha152x_attach */
130
131 /*====================================================================*/
132
133 static void aha152x_detach(struct pcmcia_device *link)
134 {
135     DEBUG(0, "aha152x_detach(0x%p)\n", link);
136
137     if (link->state & DEV_CONFIG)
138         aha152x_release_cs(link);
139
140     /* Unlink device structure, free bits */
141     kfree(link->priv);
142 } /* aha152x_detach */
143
144 /*====================================================================*/
145
146 #define CS_CHECK(fn, ret) \
147 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
148
149 static void aha152x_config_cs(struct pcmcia_device *link)
150 {
151     scsi_info_t *info = link->priv;
152     struct aha152x_setup s;
153     tuple_t tuple;
154     cisparse_t parse;
155     int i, last_ret, last_fn;
156     u_char tuple_data[64];
157     struct Scsi_Host *host;
158     
159     DEBUG(0, "aha152x_config(0x%p)\n", link);
160
161     tuple.DesiredTuple = CISTPL_CONFIG;
162     tuple.TupleData = tuple_data;
163     tuple.TupleDataMax = 64;
164     tuple.TupleOffset = 0;
165     CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
166     CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
167     CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse));
168     link->conf.ConfigBase = parse.config.base;
169
170     /* Configure card */
171     link->state |= DEV_CONFIG;
172
173     tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
174     CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
175     while (1) {
176         if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
177                 pcmcia_parse_tuple(link, &tuple, &parse) != 0)
178             goto next_entry;
179         /* For New Media T&J, look for a SCSI window */
180         if (parse.cftable_entry.io.win[0].len >= 0x20)
181             link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
182         else if ((parse.cftable_entry.io.nwin > 1) &&
183                  (parse.cftable_entry.io.win[1].len >= 0x20))
184             link->io.BasePort1 = parse.cftable_entry.io.win[1].base;
185         if ((parse.cftable_entry.io.nwin > 0) &&
186             (link->io.BasePort1 < 0xffff)) {
187             link->conf.ConfigIndex = parse.cftable_entry.index;
188             i = pcmcia_request_io(link, &link->io);
189             if (i == CS_SUCCESS) break;
190         }
191     next_entry:
192         CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
193     }
194     
195     CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
196     CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
197     
198     /* Set configuration options for the aha152x driver */
199     memset(&s, 0, sizeof(s));
200     s.conf        = "PCMCIA setup";
201     s.io_port     = link->io.BasePort1;
202     s.irq         = link->irq.AssignedIRQ;
203     s.scsiid      = host_id;
204     s.reconnect   = reconnect;
205     s.parity      = parity;
206     s.synchronous = synchronous;
207     s.delay       = reset_delay;
208     if (ext_trans)
209         s.ext_trans = ext_trans;
210
211     host = aha152x_probe_one(&s);
212     if (host == NULL) {
213         printk(KERN_INFO "aha152x_cs: no SCSI devices found\n");
214         goto cs_failed;
215     }
216
217     sprintf(info->node.dev_name, "scsi%d", host->host_no);
218     link->dev_node = &info->node;
219     info->host = host;
220
221     link->state &= ~DEV_CONFIG_PENDING;
222     return;
223     
224 cs_failed:
225     cs_error(link, last_fn, last_ret);
226     aha152x_release_cs(link);
227     return;
228 }
229
230 static void aha152x_release_cs(struct pcmcia_device *link)
231 {
232         scsi_info_t *info = link->priv;
233
234         aha152x_release(info->host);
235         pcmcia_disable_device(link);
236 }
237
238 static int aha152x_resume(struct pcmcia_device *link)
239 {
240         scsi_info_t *info = link->priv;
241
242         aha152x_host_reset_host(info->host);
243
244         return 0;
245 }
246
247 static struct pcmcia_device_id aha152x_ids[] = {
248         PCMCIA_DEVICE_PROD_ID123("New Media", "SCSI", "Bus Toaster", 0xcdf7e4cc, 0x35f26476, 0xa8851d6e),
249         PCMCIA_DEVICE_PROD_ID123("NOTEWORTHY", "SCSI", "Bus Toaster", 0xad89c6e8, 0x35f26476, 0xa8851d6e),
250         PCMCIA_DEVICE_PROD_ID12("Adaptec, Inc.", "APA-1460 SCSI Host Adapter", 0x24ba9738, 0x3a3c3d20),
251         PCMCIA_DEVICE_PROD_ID12("New Media Corporation", "Multimedia Sound/SCSI", 0x085a850b, 0x80a6535c),
252         PCMCIA_DEVICE_PROD_ID12("NOTEWORTHY", "NWCOMB02 SCSI/AUDIO COMBO CARD", 0xad89c6e8, 0x5f9a615b),
253         PCMCIA_DEVICE_NULL,
254 };
255 MODULE_DEVICE_TABLE(pcmcia, aha152x_ids);
256
257 static struct pcmcia_driver aha152x_cs_driver = {
258         .owner          = THIS_MODULE,
259         .drv            = {
260                 .name   = "aha152x_cs",
261         },
262         .probe          = aha152x_attach,
263         .remove         = aha152x_detach,
264         .id_table       = aha152x_ids,
265         .resume         = aha152x_resume,
266 };
267
268 static int __init init_aha152x_cs(void)
269 {
270         return pcmcia_register_driver(&aha152x_cs_driver);
271 }
272
273 static void __exit exit_aha152x_cs(void)
274 {
275         pcmcia_unregister_driver(&aha152x_cs_driver);
276         BUG_ON(dev_list != NULL);
277 }
278
279 module_init(init_aha152x_cs);
280 module_exit(exit_aha152x_cs);
281