rtc: ignore msb when reading back mday from alarm
[safe/jmp/linux-2.6] / drivers / rtc / rtc-cmos.c
1 /*
2  * RTC class driver for "CMOS RTC":  PCs, ACPI, etc
3  *
4  * Copyright (C) 1996 Paul Gortmaker (drivers/char/rtc.c)
5  * Copyright (C) 2006 David Brownell (convert to new framework)
6  *
7  * This program is free software; you can redistribute it and/or
8  * modify it under the terms of the GNU General Public License
9  * as published by the Free Software Foundation; either version
10  * 2 of the License, or (at your option) any later version.
11  */
12
13 /*
14  * The original "cmos clock" chip was an MC146818 chip, now obsolete.
15  * That defined the register interface now provided by all PCs, some
16  * non-PC systems, and incorporated into ACPI.  Modern PC chipsets
17  * integrate an MC146818 clone in their southbridge, and boards use
18  * that instead of discrete clones like the DS12887 or M48T86.  There
19  * are also clones that connect using the LPC bus.
20  *
21  * That register API is also used directly by various other drivers
22  * (notably for integrated NVRAM), infrastructure (x86 has code to
23  * bypass the RTC framework, directly reading the RTC during boot
24  * and updating minutes/seconds for systems using NTP synch) and
25  * utilities (like userspace 'hwclock', if no /dev node exists).
26  *
27  * So **ALL** calls to CMOS_READ and CMOS_WRITE must be done with
28  * interrupts disabled, holding the global rtc_lock, to exclude those
29  * other drivers and utilities on correctly configured systems.
30  */
31 #include <linux/kernel.h>
32 #include <linux/module.h>
33 #include <linux/init.h>
34 #include <linux/interrupt.h>
35 #include <linux/spinlock.h>
36 #include <linux/platform_device.h>
37 #include <linux/mod_devicetable.h>
38
39 /* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */
40 #include <asm-generic/rtc.h>
41
42
43 struct cmos_rtc {
44         struct rtc_device       *rtc;
45         struct device           *dev;
46         int                     irq;
47         struct resource         *iomem;
48
49         void                    (*wake_on)(struct device *);
50         void                    (*wake_off)(struct device *);
51
52         u8                      enabled_wake;
53         u8                      suspend_ctrl;
54
55         /* newer hardware extends the original register set */
56         u8                      day_alrm;
57         u8                      mon_alrm;
58         u8                      century;
59 };
60
61 /* both platform and pnp busses use negative numbers for invalid irqs */
62 #define is_valid_irq(n)         ((n) >= 0)
63
64 static const char driver_name[] = "rtc_cmos";
65
66 /* The RTC_INTR register may have e.g. RTC_PF set even if RTC_PIE is clear;
67  * always mask it against the irq enable bits in RTC_CONTROL.  Bit values
68  * are the same: PF==PIE, AF=AIE, UF=UIE; so RTC_IRQMASK works with both.
69  */
70 #define RTC_IRQMASK     (RTC_PF | RTC_AF | RTC_UF)
71
72 static inline int is_intr(u8 rtc_intr)
73 {
74         if (!(rtc_intr & RTC_IRQF))
75                 return 0;
76         return rtc_intr & RTC_IRQMASK;
77 }
78
79 /*----------------------------------------------------------------*/
80
81 static int cmos_read_time(struct device *dev, struct rtc_time *t)
82 {
83         /* REVISIT:  if the clock has a "century" register, use
84          * that instead of the heuristic in get_rtc_time().
85          * That'll make Y3K compatility (year > 2070) easy!
86          */
87         get_rtc_time(t);
88         return 0;
89 }
90
91 static int cmos_set_time(struct device *dev, struct rtc_time *t)
92 {
93         /* REVISIT:  set the "century" register if available
94          *
95          * NOTE: this ignores the issue whereby updating the seconds
96          * takes effect exactly 500ms after we write the register.
97          * (Also queueing and other delays before we get this far.)
98          */
99         return set_rtc_time(t);
100 }
101
102 static int cmos_read_alarm(struct device *dev, struct rtc_wkalrm *t)
103 {
104         struct cmos_rtc *cmos = dev_get_drvdata(dev);
105         unsigned char   rtc_control;
106
107         if (!is_valid_irq(cmos->irq))
108                 return -EIO;
109
110         /* Basic alarms only support hour, minute, and seconds fields.
111          * Some also support day and month, for alarms up to a year in
112          * the future.
113          */
114         t->time.tm_mday = -1;
115         t->time.tm_mon = -1;
116
117         spin_lock_irq(&rtc_lock);
118         t->time.tm_sec = CMOS_READ(RTC_SECONDS_ALARM);
119         t->time.tm_min = CMOS_READ(RTC_MINUTES_ALARM);
120         t->time.tm_hour = CMOS_READ(RTC_HOURS_ALARM);
121
122         if (cmos->day_alrm) {
123                 /* ignore upper bits on readback per ACPI spec */
124                 t->time.tm_mday = CMOS_READ(cmos->day_alrm) & 0x3f;
125                 if (!t->time.tm_mday)
126                         t->time.tm_mday = -1;
127
128                 if (cmos->mon_alrm) {
129                         t->time.tm_mon = CMOS_READ(cmos->mon_alrm);
130                         if (!t->time.tm_mon)
131                                 t->time.tm_mon = -1;
132                 }
133         }
134
135         rtc_control = CMOS_READ(RTC_CONTROL);
136         spin_unlock_irq(&rtc_lock);
137
138         /* REVISIT this assumes PC style usage:  always BCD */
139
140         if (((unsigned)t->time.tm_sec) < 0x60)
141                 t->time.tm_sec = BCD2BIN(t->time.tm_sec);
142         else
143                 t->time.tm_sec = -1;
144         if (((unsigned)t->time.tm_min) < 0x60)
145                 t->time.tm_min = BCD2BIN(t->time.tm_min);
146         else
147                 t->time.tm_min = -1;
148         if (((unsigned)t->time.tm_hour) < 0x24)
149                 t->time.tm_hour = BCD2BIN(t->time.tm_hour);
150         else
151                 t->time.tm_hour = -1;
152
153         if (cmos->day_alrm) {
154                 if (((unsigned)t->time.tm_mday) <= 0x31)
155                         t->time.tm_mday = BCD2BIN(t->time.tm_mday);
156                 else
157                         t->time.tm_mday = -1;
158                 if (cmos->mon_alrm) {
159                         if (((unsigned)t->time.tm_mon) <= 0x12)
160                                 t->time.tm_mon = BCD2BIN(t->time.tm_mon) - 1;
161                         else
162                                 t->time.tm_mon = -1;
163                 }
164         }
165         t->time.tm_year = -1;
166
167         t->enabled = !!(rtc_control & RTC_AIE);
168         t->pending = 0;
169
170         return 0;
171 }
172
173 static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t)
174 {
175         struct cmos_rtc *cmos = dev_get_drvdata(dev);
176         unsigned char   mon, mday, hrs, min, sec;
177         unsigned char   rtc_control, rtc_intr;
178
179         if (!is_valid_irq(cmos->irq))
180                 return -EIO;
181
182         /* REVISIT this assumes PC style usage:  always BCD */
183
184         /* Writing 0xff means "don't care" or "match all".  */
185
186         mon = t->time.tm_mon;
187         mon = (mon < 12) ? BIN2BCD(mon) : 0xff;
188         mon++;
189
190         mday = t->time.tm_mday;
191         mday = (mday >= 1 && mday <= 31) ? BIN2BCD(mday) : 0xff;
192
193         hrs = t->time.tm_hour;
194         hrs = (hrs < 24) ? BIN2BCD(hrs) : 0xff;
195
196         min = t->time.tm_min;
197         min = (min < 60) ? BIN2BCD(min) : 0xff;
198
199         sec = t->time.tm_sec;
200         sec = (sec < 60) ? BIN2BCD(sec) : 0xff;
201
202         spin_lock_irq(&rtc_lock);
203
204         /* next rtc irq must not be from previous alarm setting */
205         rtc_control = CMOS_READ(RTC_CONTROL);
206         rtc_control &= ~RTC_AIE;
207         CMOS_WRITE(rtc_control, RTC_CONTROL);
208         rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
209         rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
210         if (is_intr(rtc_intr))
211                 rtc_update_irq(cmos->rtc, 1, rtc_intr);
212
213         /* update alarm */
214         CMOS_WRITE(hrs, RTC_HOURS_ALARM);
215         CMOS_WRITE(min, RTC_MINUTES_ALARM);
216         CMOS_WRITE(sec, RTC_SECONDS_ALARM);
217
218         /* the system may support an "enhanced" alarm */
219         if (cmos->day_alrm) {
220                 CMOS_WRITE(mday, cmos->day_alrm);
221                 if (cmos->mon_alrm)
222                         CMOS_WRITE(mon, cmos->mon_alrm);
223         }
224
225         if (t->enabled) {
226                 rtc_control |= RTC_AIE;
227                 CMOS_WRITE(rtc_control, RTC_CONTROL);
228                 rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
229                 rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
230                 if (is_intr(rtc_intr))
231                         rtc_update_irq(cmos->rtc, 1, rtc_intr);
232         }
233
234         spin_unlock_irq(&rtc_lock);
235
236         return 0;
237 }
238
239 static int cmos_irq_set_freq(struct device *dev, int freq)
240 {
241         struct cmos_rtc *cmos = dev_get_drvdata(dev);
242         int             f;
243         unsigned long   flags;
244
245         if (!is_valid_irq(cmos->irq))
246                 return -ENXIO;
247
248         /* 0 = no irqs; 1 = 2^15 Hz ... 15 = 2^0 Hz */
249         f = ffs(freq);
250         if (f-- > 16)
251                 return -EINVAL;
252         f = 16 - f;
253
254         spin_lock_irqsave(&rtc_lock, flags);
255         CMOS_WRITE(RTC_REF_CLCK_32KHZ | f, RTC_FREQ_SELECT);
256         spin_unlock_irqrestore(&rtc_lock, flags);
257
258         return 0;
259 }
260
261 static int cmos_irq_set_state(struct device *dev, int enabled)
262 {
263         struct cmos_rtc *cmos = dev_get_drvdata(dev);
264         unsigned char   rtc_control, rtc_intr;
265         unsigned long   flags;
266
267         if (!is_valid_irq(cmos->irq))
268                 return -ENXIO;
269
270         spin_lock_irqsave(&rtc_lock, flags);
271         rtc_control = CMOS_READ(RTC_CONTROL);
272
273         if (enabled)
274                 rtc_control |= RTC_PIE;
275         else
276                 rtc_control &= ~RTC_PIE;
277
278         CMOS_WRITE(rtc_control, RTC_CONTROL);
279
280         rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
281         rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
282         if (is_intr(rtc_intr))
283                 rtc_update_irq(cmos->rtc, 1, rtc_intr);
284
285         spin_unlock_irqrestore(&rtc_lock, flags);
286         return 0;
287 }
288
289 #if defined(CONFIG_RTC_INTF_DEV) || defined(CONFIG_RTC_INTF_DEV_MODULE)
290
291 static int
292 cmos_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
293 {
294         struct cmos_rtc *cmos = dev_get_drvdata(dev);
295         unsigned char   rtc_control, rtc_intr;
296         unsigned long   flags;
297
298         switch (cmd) {
299         case RTC_AIE_OFF:
300         case RTC_AIE_ON:
301         case RTC_UIE_OFF:
302         case RTC_UIE_ON:
303         case RTC_PIE_OFF:
304         case RTC_PIE_ON:
305                 if (!is_valid_irq(cmos->irq))
306                         return -EINVAL;
307                 break;
308         default:
309                 return -ENOIOCTLCMD;
310         }
311
312         spin_lock_irqsave(&rtc_lock, flags);
313         rtc_control = CMOS_READ(RTC_CONTROL);
314         switch (cmd) {
315         case RTC_AIE_OFF:       /* alarm off */
316                 rtc_control &= ~RTC_AIE;
317                 break;
318         case RTC_AIE_ON:        /* alarm on */
319                 rtc_control |= RTC_AIE;
320                 break;
321         case RTC_UIE_OFF:       /* update off */
322                 rtc_control &= ~RTC_UIE;
323                 break;
324         case RTC_UIE_ON:        /* update on */
325                 rtc_control |= RTC_UIE;
326                 break;
327         case RTC_PIE_OFF:       /* periodic off */
328                 rtc_control &= ~RTC_PIE;
329                 break;
330         case RTC_PIE_ON:        /* periodic on */
331                 rtc_control |= RTC_PIE;
332                 break;
333         }
334         CMOS_WRITE(rtc_control, RTC_CONTROL);
335         rtc_intr = CMOS_READ(RTC_INTR_FLAGS);
336         rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
337         if (is_intr(rtc_intr))
338                 rtc_update_irq(cmos->rtc, 1, rtc_intr);
339         spin_unlock_irqrestore(&rtc_lock, flags);
340         return 0;
341 }
342
343 #else
344 #define cmos_rtc_ioctl  NULL
345 #endif
346
347 #if defined(CONFIG_RTC_INTF_PROC) || defined(CONFIG_RTC_INTF_PROC_MODULE)
348
349 static int cmos_procfs(struct device *dev, struct seq_file *seq)
350 {
351         struct cmos_rtc *cmos = dev_get_drvdata(dev);
352         unsigned char   rtc_control, valid;
353
354         spin_lock_irq(&rtc_lock);
355         rtc_control = CMOS_READ(RTC_CONTROL);
356         valid = CMOS_READ(RTC_VALID);
357         spin_unlock_irq(&rtc_lock);
358
359         /* NOTE:  at least ICH6 reports battery status using a different
360          * (non-RTC) bit; and SQWE is ignored on many current systems.
361          */
362         return seq_printf(seq,
363                         "periodic_IRQ\t: %s\n"
364                         "update_IRQ\t: %s\n"
365                         // "square_wave\t: %s\n"
366                         // "BCD\t\t: %s\n"
367                         "DST_enable\t: %s\n"
368                         "periodic_freq\t: %d\n"
369                         "batt_status\t: %s\n",
370                         (rtc_control & RTC_PIE) ? "yes" : "no",
371                         (rtc_control & RTC_UIE) ? "yes" : "no",
372                         // (rtc_control & RTC_SQWE) ? "yes" : "no",
373                         // (rtc_control & RTC_DM_BINARY) ? "no" : "yes",
374                         (rtc_control & RTC_DST_EN) ? "yes" : "no",
375                         cmos->rtc->irq_freq,
376                         (valid & RTC_VRT) ? "okay" : "dead");
377 }
378
379 #else
380 #define cmos_procfs     NULL
381 #endif
382
383 static const struct rtc_class_ops cmos_rtc_ops = {
384         .ioctl          = cmos_rtc_ioctl,
385         .read_time      = cmos_read_time,
386         .set_time       = cmos_set_time,
387         .read_alarm     = cmos_read_alarm,
388         .set_alarm      = cmos_set_alarm,
389         .proc           = cmos_procfs,
390         .irq_set_freq   = cmos_irq_set_freq,
391         .irq_set_state  = cmos_irq_set_state,
392 };
393
394 /*----------------------------------------------------------------*/
395
396 static struct cmos_rtc  cmos_rtc;
397
398 static irqreturn_t cmos_interrupt(int irq, void *p)
399 {
400         u8              irqstat;
401
402         spin_lock(&rtc_lock);
403         irqstat = CMOS_READ(RTC_INTR_FLAGS);
404         irqstat &= (CMOS_READ(RTC_CONTROL) & RTC_IRQMASK) | RTC_IRQF;
405         spin_unlock(&rtc_lock);
406
407         if (is_intr(irqstat)) {
408                 rtc_update_irq(p, 1, irqstat);
409                 return IRQ_HANDLED;
410         } else
411                 return IRQ_NONE;
412 }
413
414 #ifdef  CONFIG_PNP
415 #define is_pnp()        1
416 #define INITSECTION
417
418 #else
419 #define is_pnp()        0
420 #define INITSECTION     __init
421 #endif
422
423 static int INITSECTION
424 cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
425 {
426         struct cmos_rtc_board_info      *info = dev->platform_data;
427         int                             retval = 0;
428         unsigned char                   rtc_control;
429
430         /* there can be only one ... */
431         if (cmos_rtc.dev)
432                 return -EBUSY;
433
434         if (!ports)
435                 return -ENODEV;
436
437         /* Claim I/O ports ASAP, minimizing conflict with legacy driver.
438          *
439          * REVISIT non-x86 systems may instead use memory space resources
440          * (needing ioremap etc), not i/o space resources like this ...
441          */
442         ports = request_region(ports->start,
443                         ports->end + 1 - ports->start,
444                         driver_name);
445         if (!ports) {
446                 dev_dbg(dev, "i/o registers already in use\n");
447                 return -EBUSY;
448         }
449
450         cmos_rtc.irq = rtc_irq;
451         cmos_rtc.iomem = ports;
452
453         /* For ACPI systems extension info comes from the FADT.  On others,
454          * board specific setup provides it as appropriate.  Systems where
455          * the alarm IRQ isn't automatically a wakeup IRQ (like ACPI, and
456          * some almost-clones) can provide hooks to make that behave.
457          */
458         if (info) {
459                 cmos_rtc.day_alrm = info->rtc_day_alarm;
460                 cmos_rtc.mon_alrm = info->rtc_mon_alarm;
461                 cmos_rtc.century = info->rtc_century;
462
463                 if (info->wake_on && info->wake_off) {
464                         cmos_rtc.wake_on = info->wake_on;
465                         cmos_rtc.wake_off = info->wake_off;
466                 }
467         }
468
469         cmos_rtc.rtc = rtc_device_register(driver_name, dev,
470                                 &cmos_rtc_ops, THIS_MODULE);
471         if (IS_ERR(cmos_rtc.rtc)) {
472                 retval = PTR_ERR(cmos_rtc.rtc);
473                 goto cleanup0;
474         }
475
476         cmos_rtc.dev = dev;
477         dev_set_drvdata(dev, &cmos_rtc);
478         rename_region(ports, cmos_rtc.rtc->dev.bus_id);
479
480         spin_lock_irq(&rtc_lock);
481
482         /* force periodic irq to CMOS reset default of 1024Hz;
483          *
484          * REVISIT it's been reported that at least one x86_64 ALI mobo
485          * doesn't use 32KHz here ... for portability we might need to
486          * do something about other clock frequencies.
487          */
488         CMOS_WRITE(RTC_REF_CLCK_32KHZ | 0x06, RTC_FREQ_SELECT);
489         cmos_rtc.rtc->irq_freq = 1024;
490
491         /* disable irqs.
492          *
493          * NOTE after changing RTC_xIE bits we always read INTR_FLAGS;
494          * allegedly some older rtcs need that to handle irqs properly
495          */
496         rtc_control = CMOS_READ(RTC_CONTROL);
497         rtc_control &= ~(RTC_PIE | RTC_AIE | RTC_UIE);
498         CMOS_WRITE(rtc_control, RTC_CONTROL);
499         CMOS_READ(RTC_INTR_FLAGS);
500
501         spin_unlock_irq(&rtc_lock);
502
503         /* FIXME teach the alarm code how to handle binary mode;
504          * <asm-generic/rtc.h> doesn't know 12-hour mode either.
505          */
506         if (!(rtc_control & RTC_24H) || (rtc_control & (RTC_DM_BINARY))) {
507                 dev_dbg(dev, "only 24-hr BCD mode supported\n");
508                 retval = -ENXIO;
509                 goto cleanup1;
510         }
511
512         if (is_valid_irq(rtc_irq))
513                 retval = request_irq(rtc_irq, cmos_interrupt, IRQF_DISABLED,
514                                 cmos_rtc.rtc->dev.bus_id,
515                                 cmos_rtc.rtc);
516         if (retval < 0) {
517                 dev_dbg(dev, "IRQ %d is already in use\n", rtc_irq);
518                 goto cleanup1;
519         }
520
521         /* REVISIT optionally make 50 or 114 bytes NVRAM available,
522          * like rtc-ds1553, rtc-ds1742 ... this will often include
523          * registers for century, and day/month alarm.
524          */
525
526         pr_info("%s: alarms up to one %s%s\n",
527                         cmos_rtc.rtc->dev.bus_id,
528                         is_valid_irq(rtc_irq)
529                                 ?  (cmos_rtc.mon_alrm
530                                         ? "year"
531                                         : (cmos_rtc.day_alrm
532                                                 ? "month" : "day"))
533                                 : "no",
534                         cmos_rtc.century ? ", y3k" : ""
535                         );
536
537         return 0;
538
539 cleanup1:
540         cmos_rtc.dev = NULL;
541         rtc_device_unregister(cmos_rtc.rtc);
542 cleanup0:
543         release_region(ports->start, ports->end + 1 - ports->start);
544         return retval;
545 }
546
547 static void cmos_do_shutdown(void)
548 {
549         unsigned char   rtc_control;
550
551         spin_lock_irq(&rtc_lock);
552         rtc_control = CMOS_READ(RTC_CONTROL);
553         rtc_control &= ~(RTC_PIE|RTC_AIE|RTC_UIE);
554         CMOS_WRITE(rtc_control, RTC_CONTROL);
555         CMOS_READ(RTC_INTR_FLAGS);
556         spin_unlock_irq(&rtc_lock);
557 }
558
559 static void __exit cmos_do_remove(struct device *dev)
560 {
561         struct cmos_rtc *cmos = dev_get_drvdata(dev);
562         struct resource *ports;
563
564         cmos_do_shutdown();
565
566         if (is_valid_irq(cmos->irq))
567                 free_irq(cmos->irq, cmos->rtc);
568
569         rtc_device_unregister(cmos->rtc);
570         cmos->rtc = NULL;
571
572         ports = cmos->iomem;
573         release_region(ports->start, ports->end + 1 - ports->start);
574         cmos->iomem = NULL;
575
576         cmos->dev = NULL;
577         dev_set_drvdata(dev, NULL);
578 }
579
580 #ifdef  CONFIG_PM
581
582 static int cmos_suspend(struct device *dev, pm_message_t mesg)
583 {
584         struct cmos_rtc *cmos = dev_get_drvdata(dev);
585         int             do_wake = device_may_wakeup(dev);
586         unsigned char   tmp;
587
588         /* only the alarm might be a wakeup event source */
589         spin_lock_irq(&rtc_lock);
590         cmos->suspend_ctrl = tmp = CMOS_READ(RTC_CONTROL);
591         if (tmp & (RTC_PIE|RTC_AIE|RTC_UIE)) {
592                 unsigned char   irqstat;
593
594                 if (do_wake)
595                         tmp &= ~(RTC_PIE|RTC_UIE);
596                 else
597                         tmp &= ~(RTC_PIE|RTC_AIE|RTC_UIE);
598                 CMOS_WRITE(tmp, RTC_CONTROL);
599                 irqstat = CMOS_READ(RTC_INTR_FLAGS);
600                 irqstat &= (tmp & RTC_IRQMASK) | RTC_IRQF;
601                 if (is_intr(irqstat))
602                         rtc_update_irq(cmos->rtc, 1, irqstat);
603         }
604         spin_unlock_irq(&rtc_lock);
605
606         if (tmp & RTC_AIE) {
607                 cmos->enabled_wake = 1;
608                 if (cmos->wake_on)
609                         cmos->wake_on(dev);
610                 else
611                         enable_irq_wake(cmos->irq);
612         }
613
614         pr_debug("%s: suspend%s, ctrl %02x\n",
615                         cmos_rtc.rtc->dev.bus_id,
616                         (tmp & RTC_AIE) ? ", alarm may wake" : "",
617                         tmp);
618
619         return 0;
620 }
621
622 static int cmos_resume(struct device *dev)
623 {
624         struct cmos_rtc *cmos = dev_get_drvdata(dev);
625         unsigned char   tmp = cmos->suspend_ctrl;
626
627         /* re-enable any irqs previously active */
628         if (tmp & (RTC_PIE|RTC_AIE|RTC_UIE)) {
629
630                 if (cmos->enabled_wake) {
631                         if (cmos->wake_off)
632                                 cmos->wake_off(dev);
633                         else
634                                 disable_irq_wake(cmos->irq);
635                         cmos->enabled_wake = 0;
636                 }
637
638                 spin_lock_irq(&rtc_lock);
639                 CMOS_WRITE(tmp, RTC_CONTROL);
640                 tmp = CMOS_READ(RTC_INTR_FLAGS);
641                 tmp &= (cmos->suspend_ctrl & RTC_IRQMASK) | RTC_IRQF;
642                 if (is_intr(tmp))
643                         rtc_update_irq(cmos->rtc, 1, tmp);
644                 spin_unlock_irq(&rtc_lock);
645         }
646
647         pr_debug("%s: resume, ctrl %02x\n",
648                         cmos_rtc.rtc->dev.bus_id,
649                         cmos->suspend_ctrl);
650
651
652         return 0;
653 }
654
655 #else
656 #define cmos_suspend    NULL
657 #define cmos_resume     NULL
658 #endif
659
660 /*----------------------------------------------------------------*/
661
662 /* The "CMOS" RTC normally lives on the platform_bus.  On ACPI systems,
663  * the device node will always be created as a PNPACPI device.  Plus
664  * pre-ACPI PCs probably list it in the PNPBIOS tables.
665  */
666
667 #ifdef  CONFIG_PNP
668
669 #include <linux/pnp.h>
670
671 static int __devinit
672 cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
673 {
674         /* REVISIT paranoia argues for a shutdown notifier, since PNP
675          * drivers can't provide shutdown() methods to disable IRQs.
676          * Or better yet, fix PNP to allow those methods...
677          */
678         if (pnp_port_start(pnp,0) == 0x70 && !pnp_irq_valid(pnp,0))
679                 /* Some machines contain a PNP entry for the RTC, but
680                  * don't define the IRQ. It should always be safe to
681                  * hardcode it in these cases
682                  */
683                 return cmos_do_probe(&pnp->dev, &pnp->res.port_resource[0], 8);
684         else
685                 return cmos_do_probe(&pnp->dev,
686                                      &pnp->res.port_resource[0],
687                                      pnp->res.irq_resource[0].start);
688 }
689
690 static void __exit cmos_pnp_remove(struct pnp_dev *pnp)
691 {
692         cmos_do_remove(&pnp->dev);
693 }
694
695 #ifdef  CONFIG_PM
696
697 static int cmos_pnp_suspend(struct pnp_dev *pnp, pm_message_t mesg)
698 {
699         return cmos_suspend(&pnp->dev, mesg);
700 }
701
702 static int cmos_pnp_resume(struct pnp_dev *pnp)
703 {
704         return cmos_resume(&pnp->dev);
705 }
706
707 #else
708 #define cmos_pnp_suspend        NULL
709 #define cmos_pnp_resume         NULL
710 #endif
711
712
713 static const struct pnp_device_id rtc_ids[] = {
714         { .id = "PNP0b00", },
715         { .id = "PNP0b01", },
716         { .id = "PNP0b02", },
717         { },
718 };
719 MODULE_DEVICE_TABLE(pnp, rtc_ids);
720
721 static struct pnp_driver cmos_pnp_driver = {
722         .name           = (char *) driver_name,
723         .id_table       = rtc_ids,
724         .probe          = cmos_pnp_probe,
725         .remove         = __exit_p(cmos_pnp_remove),
726
727         /* flag ensures resume() gets called, and stops syslog spam */
728         .flags          = PNP_DRIVER_RES_DO_NOT_CHANGE,
729         .suspend        = cmos_pnp_suspend,
730         .resume         = cmos_pnp_resume,
731 };
732
733 static int __init cmos_init(void)
734 {
735         return pnp_register_driver(&cmos_pnp_driver);
736 }
737 module_init(cmos_init);
738
739 static void __exit cmos_exit(void)
740 {
741         pnp_unregister_driver(&cmos_pnp_driver);
742 }
743 module_exit(cmos_exit);
744
745 #else   /* no PNP */
746
747 /*----------------------------------------------------------------*/
748
749 /* Platform setup should have set up an RTC device, when PNP is
750  * unavailable ... this could happen even on (older) PCs.
751  */
752
753 static int __init cmos_platform_probe(struct platform_device *pdev)
754 {
755         return cmos_do_probe(&pdev->dev,
756                         platform_get_resource(pdev, IORESOURCE_IO, 0),
757                         platform_get_irq(pdev, 0));
758 }
759
760 static int __exit cmos_platform_remove(struct platform_device *pdev)
761 {
762         cmos_do_remove(&pdev->dev);
763         return 0;
764 }
765
766 static void cmos_platform_shutdown(struct platform_device *pdev)
767 {
768         cmos_do_shutdown();
769 }
770
771 static struct platform_driver cmos_platform_driver = {
772         .remove         = __exit_p(cmos_platform_remove),
773         .shutdown       = cmos_platform_shutdown,
774         .driver = {
775                 .name           = (char *) driver_name,
776                 .suspend        = cmos_suspend,
777                 .resume         = cmos_resume,
778         }
779 };
780
781 static int __init cmos_init(void)
782 {
783         return platform_driver_probe(&cmos_platform_driver,
784                         cmos_platform_probe);
785 }
786 module_init(cmos_init);
787
788 static void __exit cmos_exit(void)
789 {
790         platform_driver_unregister(&cmos_platform_driver);
791 }
792 module_exit(cmos_exit);
793
794
795 #endif  /* !PNP */
796
797 MODULE_AUTHOR("David Brownell");
798 MODULE_DESCRIPTION("Driver for PC-style 'CMOS' RTCs");
799 MODULE_LICENSE("GPL");