PNP: add pnp_eisa_id_to_string()
[safe/jmp/linux-2.6] / drivers / pnp / support.c
1 /*
2  * support.c - standard functions for the use of pnp protocol drivers
3  *
4  * Copyright 2003 Adam Belay <ambx1@neo.rr.com>
5  */
6
7 #include <linux/module.h>
8 #include <linux/ctype.h>
9 #include <linux/pnp.h>
10 #include "base.h"
11
12 /**
13  * pnp_is_active - Determines if a device is active based on its current
14  *      resources
15  * @dev: pointer to the desired PnP device
16  */
17 int pnp_is_active(struct pnp_dev *dev)
18 {
19         if (!pnp_port_start(dev, 0) && pnp_port_len(dev, 0) <= 1 &&
20             !pnp_mem_start(dev, 0) && pnp_mem_len(dev, 0) <= 1 &&
21             pnp_irq(dev, 0) == -1 && pnp_dma(dev, 0) == -1)
22                 return 0;
23         else
24                 return 1;
25 }
26
27 EXPORT_SYMBOL(pnp_is_active);
28
29 /*
30  * Functionally similar to acpi_ex_eisa_id_to_string(), but that's
31  * buried in the ACPI CA, and we can't depend on it being present.
32  */
33 void pnp_eisa_id_to_string(u32 id, char *str)
34 {
35         id = be32_to_cpu(id);
36
37         /*
38          * According to the specs, the first three characters are five-bit
39          * compressed ASCII, and the left-over high order bit should be zero.
40          * However, the Linux ISAPNP code historically used six bits for the
41          * first character, and there seem to be IDs that depend on that,
42          * e.g., "nEC8241" in the Linux 8250_pnp serial driver and the
43          * FreeBSD sys/pc98/cbus/sio_cbus.c driver.
44          */
45         str[0] = 'A' + ((id >> 26) & 0x3f) - 1;
46         str[1] = 'A' + ((id >> 21) & 0x1f) - 1;
47         str[2] = 'A' + ((id >> 16) & 0x1f) - 1;
48         str[3] = hex_asc((id >> 12) & 0xf);
49         str[4] = hex_asc((id >>  8) & 0xf);
50         str[5] = hex_asc((id >>  4) & 0xf);
51         str[6] = hex_asc((id >>  0) & 0xf);
52         str[7] = '\0';
53 }