[PARISC] Remove some obsolete comments and I checked that Reo is similar to Ike

[safe/jmp/linux-2.6] / drivers / parisc / sba_iommu.c

/*
**  System Bus Adapter (SBA) I/O MMU manager
**
**      (c) Copyright 2000-2004 Grant Grundler <grundler @ parisc-linux x org>
**      (c) Copyright 2004 Naresh Kumar Inna <knaresh at india x hp x com>
**      (c) Copyright 2000-2004 Hewlett-Packard Company
**
**      Portions (c) 1999 Dave S. Miller (from sparc64 I/O MMU code)
**
**      This program is free software; you can redistribute it and/or modify
**      it under the terms of the GNU General Public License as published by
**      the Free Software Foundation; either version 2 of the License, or
**      (at your option) any later version.
**
**
** This module initializes the IOC (I/O Controller) found on B1000/C3000/
** J5000/J7000/N-class/L-class machines and their successors.
**
** FIXME: add DMA hint support programming in both sba and lba modules.
*/

#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/init.h>

#include <linux/mm.h>
#include <linux/string.h>
#include <linux/pci.h>

#include <asm/byteorder.h>
#include <asm/io.h>
#include <asm/dma.h>            /* for DMA_CHUNK_SIZE */

#include <asm/hardware.h>       /* for register_parisc_driver() stuff */

#include <linux/proc_fs.h>
#include <linux/seq_file.h>

#include <asm/mckinley.h>       /* for proc_mckinley_root */
#include <asm/runway.h>         /* for proc_runway_root */
#include <asm/pdc.h>            /* for PDC_MODEL_* */
#include <asm/pdcpat.h>         /* for is_pdc_pat() */
#include <asm/parisc-device.h>

#define MODULE_NAME "SBA"

#ifdef CONFIG_PROC_FS
/* depends on proc fs support. But costs CPU performance */
#undef SBA_COLLECT_STATS
#endif

/*
** The number of debug flags is a clue - this code is fragile.
** Don't even think about messing with it unless you have
** plenty of 710's to sacrifice to the computer gods. :^)
*/
#undef DEBUG_SBA_INIT
#undef DEBUG_SBA_RUN
#undef DEBUG_SBA_RUN_SG
#undef DEBUG_SBA_RESOURCE
#undef ASSERT_PDIR_SANITY
#undef DEBUG_LARGE_SG_ENTRIES
#undef DEBUG_DMB_TRAP

#ifdef DEBUG_SBA_INIT
#define DBG_INIT(x...)  printk(x)
#else
#define DBG_INIT(x...)
#endif

#ifdef DEBUG_SBA_RUN
#define DBG_RUN(x...)   printk(x)
#else
#define DBG_RUN(x...)
#endif

#ifdef DEBUG_SBA_RUN_SG
#define DBG_RUN_SG(x...)        printk(x)
#else
#define DBG_RUN_SG(x...)
#endif


#ifdef DEBUG_SBA_RESOURCE
#define DBG_RES(x...)   printk(x)
#else
#define DBG_RES(x...)
#endif

#if defined(CONFIG_64BIT)
/* "low end" PA8800 machines use ZX1 chipset: PAT PDC and only run 64-bit */
#define ZX1_SUPPORT
#endif

#define SBA_INLINE      __inline__


/*
** The number of pdir entries to "free" before issueing
** a read to PCOM register to flush out PCOM writes.
** Interacts with allocation granularity (ie 4 or 8 entries
** allocated and free'd/purged at a time might make this
** less interesting).
*/
#define DELAYED_RESOURCE_CNT    16

#define DEFAULT_DMA_HINT_REG    0

#define ASTRO_RUNWAY_PORT       0x582
#define IKE_MERCED_PORT         0x803
#define REO_MERCED_PORT         0x804
#define REOG_MERCED_PORT        0x805
#define PLUTO_MCKINLEY_PORT     0x880

#define SBA_FUNC_ID     0x0000  /* function id */
#define SBA_FCLASS      0x0008  /* function class, bist, header, rev... */

#define IS_ASTRO(id)            ((id)->hversion == ASTRO_RUNWAY_PORT)
#define IS_IKE(id)              ((id)->hversion == IKE_MERCED_PORT)
#define IS_PLUTO(id)            ((id)->hversion == PLUTO_MCKINLEY_PORT)

#define SBA_FUNC_SIZE 4096   /* SBA configuration function reg set */

#define ASTRO_IOC_OFFSET        (32 * SBA_FUNC_SIZE)
#define PLUTO_IOC_OFFSET        (1 * SBA_FUNC_SIZE)
/* Ike's IOC's occupy functions 2 and 3 */
#define IKE_IOC_OFFSET(p)       ((p+2) * SBA_FUNC_SIZE)

#define IOC_CTRL          0x8   /* IOC_CTRL offset */
#define IOC_CTRL_TC       (1 << 0) /* TOC Enable */
#define IOC_CTRL_CE       (1 << 1) /* Coalesce Enable */
#define IOC_CTRL_DE       (1 << 2) /* Dillon Enable */
#define IOC_CTRL_RM       (1 << 8) /* Real Mode */
#define IOC_CTRL_NC       (1 << 9) /* Non Coherent Mode */
#define IOC_CTRL_D4       (1 << 11) /* Disable 4-byte coalescing */
#define IOC_CTRL_DD       (1 << 13) /* Disable distr. LMMIO range coalescing */

#define MAX_IOC         2       /* per Ike. Pluto/Astro only have 1. */

#define ROPES_PER_IOC   8       /* per Ike half or Pluto/Astro */


/*
** Offsets into MBIB (Function 0 on Ike and hopefully Astro)
** Firmware programs this stuff. Don't touch it.
*/
#define LMMIO_DIRECT0_BASE  0x300
#define LMMIO_DIRECT0_MASK  0x308
#define LMMIO_DIRECT0_ROUTE 0x310

#define LMMIO_DIST_BASE  0x360
#define LMMIO_DIST_MASK  0x368
#define LMMIO_DIST_ROUTE 0x370

#define IOS_DIST_BASE   0x390
#define IOS_DIST_MASK   0x398
#define IOS_DIST_ROUTE  0x3A0

#define IOS_DIRECT_BASE 0x3C0
#define IOS_DIRECT_MASK 0x3C8
#define IOS_DIRECT_ROUTE 0x3D0

/*
** Offsets into I/O TLB (Function 2 and 3 on Ike)
*/
#define ROPE0_CTL       0x200  /* "regbus pci0" */
#define ROPE1_CTL       0x208
#define ROPE2_CTL       0x210
#define ROPE3_CTL       0x218
#define ROPE4_CTL       0x220
#define ROPE5_CTL       0x228
#define ROPE6_CTL       0x230
#define ROPE7_CTL       0x238

#define IOC_ROPE0_CFG   0x500   /* pluto only */
#define   IOC_ROPE_AO     0x10  /* Allow "Relaxed Ordering" */



#define HF_ENABLE       0x40


#define IOC_IBASE       0x300   /* IO TLB */
#define IOC_IMASK       0x308
#define IOC_PCOM        0x310
#define IOC_TCNFG       0x318
#define IOC_PDIR_BASE   0x320

/* AGP GART driver looks for this */
#define SBA_IOMMU_COOKIE    0x0000badbadc0ffeeUL


/*
** IOC supports 4/8/16/64KB page sizes (see TCNFG register)
** It's safer (avoid memory corruption) to keep DMA page mappings
** equivalently sized to VM PAGE_SIZE.
**
** We really can't avoid generating a new mapping for each
** page since the Virtual Coherence Index has to be generated
** and updated for each page.
**
** PAGE_SIZE could be greater than IOVP_SIZE. But not the inverse.
*/
#define IOVP_SIZE       PAGE_SIZE
#define IOVP_SHIFT      PAGE_SHIFT
#define IOVP_MASK       PAGE_MASK

#define SBA_PERF_CFG    0x708   /* Performance Counter stuff */
#define SBA_PERF_MASK1  0x718
#define SBA_PERF_MASK2  0x730


/*
** Offsets into PCI Performance Counters (functions 12 and 13)
** Controlled by PERF registers in function 2 & 3 respectively.
*/
#define SBA_PERF_CNT1   0x200
#define SBA_PERF_CNT2   0x208
#define SBA_PERF_CNT3   0x210


struct ioc {
        void __iomem    *ioc_hpa;       /* I/O MMU base address */
        char            *res_map;       /* resource map, bit == pdir entry */
        u64             *pdir_base;     /* physical base address */
        unsigned long   ibase;  /* pdir IOV Space base - shared w/lba_pci */
        unsigned long   imask;  /* pdir IOV Space mask - shared w/lba_pci */
#ifdef ZX1_SUPPORT
        unsigned long   iovp_mask;      /* help convert IOVA to IOVP */
#endif
        unsigned long   *res_hint;      /* next avail IOVP - circular search */
        spinlock_t      res_lock;
        unsigned int    res_bitshift;   /* from the LEFT! */
        unsigned int    res_size;       /* size of resource map in bytes */
#ifdef SBA_HINT_SUPPORT
/* FIXME : DMA HINTs not used */
        unsigned long   hint_mask_pdir; /* bits used for DMA hints */
        unsigned int    hint_shift_pdir;
#endif
#if DELAYED_RESOURCE_CNT > 0
        int saved_cnt;
        struct sba_dma_pair {
                dma_addr_t      iova;
                size_t          size;
        } saved[DELAYED_RESOURCE_CNT];
#endif

#ifdef SBA_COLLECT_STATS
#define SBA_SEARCH_SAMPLE       0x100
        unsigned long avg_search[SBA_SEARCH_SAMPLE];
        unsigned long avg_idx;  /* current index into avg_search */
        unsigned long used_pages;
        unsigned long msingle_calls;
        unsigned long msingle_pages;
        unsigned long msg_calls;
        unsigned long msg_pages;
        unsigned long usingle_calls;
        unsigned long usingle_pages;
        unsigned long usg_calls;
        unsigned long usg_pages;
#endif

        /* STUFF We don't need in performance path */
        unsigned int    pdir_size;      /* in bytes, determined by IOV Space size */
};

struct sba_device {
        struct sba_device       *next;  /* list of SBA's in system */
        struct parisc_device    *dev;   /* dev found in bus walk */
        struct parisc_device_id *iodc;  /* data about dev from firmware */
        const char              *name;
        void __iomem            *sba_hpa; /* base address */
        spinlock_t              sba_lock;
        unsigned int            flags;  /* state/functionality enabled */
        unsigned int            hw_rev;  /* HW revision of chip */

        struct resource         chip_resv; /* MMIO reserved for chip */
        struct resource         iommu_resv; /* MMIO reserved for iommu */

        unsigned int            num_ioc;  /* number of on-board IOC's */
        struct ioc              ioc[MAX_IOC];
};


static struct sba_device *sba_list;

static unsigned long ioc_needs_fdc = 0;

/* global count of IOMMUs in the system */
static unsigned int global_ioc_cnt = 0;

/* PA8700 (Piranha 2.2) bug workaround */
static unsigned long piranha_bad_128k = 0;

/* Looks nice and keeps the compiler happy */
#define SBA_DEV(d) ((struct sba_device *) (d))

#ifdef SBA_AGP_SUPPORT
static int reserve_sba_gart = 1;
#endif

#define ROUNDUP(x,y) ((x + ((y)-1)) & ~((y)-1))


/************************************
** SBA register read and write support
**
** BE WARNED: register writes are posted.
**  (ie follow writes which must reach HW with a read)
**
** Superdome (in particular, REO) allows only 64-bit CSR accesses.
*/
#define READ_REG32(addr)        readl(addr)
#define READ_REG64(addr)        readq(addr)
#define WRITE_REG32(val, addr)  writel((val), (addr))
#define WRITE_REG64(val, addr)  writeq((val), (addr))

#ifdef CONFIG_64BIT
#define READ_REG(addr)          READ_REG64(addr)
#define WRITE_REG(value, addr)  WRITE_REG64(value, addr)
#else
#define READ_REG(addr)          READ_REG32(addr)
#define WRITE_REG(value, addr)  WRITE_REG32(value, addr)
#endif

#ifdef DEBUG_SBA_INIT

/* NOTE: When CONFIG_64BIT isn't defined, READ_REG64() is two 32-bit reads */

/**
 * sba_dump_ranges - debugging only - print ranges assigned to this IOA
 * @hpa: base address of the sba
 *
 * Print the MMIO and IO Port address ranges forwarded by an Astro/Ike/RIO
 * IO Adapter (aka Bus Converter).
 */
static void
sba_dump_ranges(void __iomem *hpa)
{
        DBG_INIT("SBA at 0x%p\n", hpa);
        DBG_INIT("IOS_DIST_BASE   : %Lx\n", READ_REG64(hpa+IOS_DIST_BASE));
        DBG_INIT("IOS_DIST_MASK   : %Lx\n", READ_REG64(hpa+IOS_DIST_MASK));
        DBG_INIT("IOS_DIST_ROUTE  : %Lx\n", READ_REG64(hpa+IOS_DIST_ROUTE));
        DBG_INIT("\n");
        DBG_INIT("IOS_DIRECT_BASE : %Lx\n", READ_REG64(hpa+IOS_DIRECT_BASE));
        DBG_INIT("IOS_DIRECT_MASK : %Lx\n", READ_REG64(hpa+IOS_DIRECT_MASK));
        DBG_INIT("IOS_DIRECT_ROUTE: %Lx\n", READ_REG64(hpa+IOS_DIRECT_ROUTE));
}

/**
 * sba_dump_tlb - debugging only - print IOMMU operating parameters
 * @hpa: base address of the IOMMU
 *
 * Print the size/location of the IO MMU PDIR.
 */
static void sba_dump_tlb(void __iomem *hpa)
{
        DBG_INIT("IO TLB at 0x%p\n", hpa);
        DBG_INIT("IOC_IBASE    : 0x%Lx\n", READ_REG64(hpa+IOC_IBASE));
        DBG_INIT("IOC_IMASK    : 0x%Lx\n", READ_REG64(hpa+IOC_IMASK));
        DBG_INIT("IOC_TCNFG    : 0x%Lx\n", READ_REG64(hpa+IOC_TCNFG));
        DBG_INIT("IOC_PDIR_BASE: 0x%Lx\n", READ_REG64(hpa+IOC_PDIR_BASE));
        DBG_INIT("\n");
}
#else
#define sba_dump_ranges(x)
#define sba_dump_tlb(x)
#endif  /* DEBUG_SBA_INIT */


#ifdef ASSERT_PDIR_SANITY

/**
 * sba_dump_pdir_entry - debugging only - print one IOMMU PDIR entry
 * @ioc: IO MMU structure which owns the pdir we are interested in.
 * @msg: text to print ont the output line.
 * @pide: pdir index.
 *
 * Print one entry of the IO MMU PDIR in human readable form.
 */
static void
sba_dump_pdir_entry(struct ioc *ioc, char *msg, uint pide)
{
        /* start printing from lowest pde in rval */
        u64 *ptr = &(ioc->pdir_base[pide & (~0U * BITS_PER_LONG)]);
        unsigned long *rptr = (unsigned long *) &(ioc->res_map[(pide >>3) & ~(sizeof(unsigned long) - 1)]);
        uint rcnt;

        printk(KERN_DEBUG "SBA: %s rp %p bit %d rval 0x%lx\n",
                 msg,
                 rptr, pide & (BITS_PER_LONG - 1), *rptr);

        rcnt = 0;
        while (rcnt < BITS_PER_LONG) {
                printk(KERN_DEBUG "%s %2d %p %016Lx\n",
                        (rcnt == (pide & (BITS_PER_LONG - 1)))
                                ? "    -->" : "       ",
                        rcnt, ptr, *ptr );
                rcnt++;
                ptr++;
        }
        printk(KERN_DEBUG "%s", msg);
}


/**
 * sba_check_pdir - debugging only - consistency checker
 * @ioc: IO MMU structure which owns the pdir we are interested in.
 * @msg: text to print ont the output line.
 *
 * Verify the resource map and pdir state is consistent
 */
static int
sba_check_pdir(struct ioc *ioc, char *msg)
{
        u32 *rptr_end = (u32 *) &(ioc->res_map[ioc->res_size]);
        u32 *rptr = (u32 *) ioc->res_map;       /* resource map ptr */
        u64 *pptr = ioc->pdir_base;     /* pdir ptr */
        uint pide = 0;

        while (rptr < rptr_end) {
                u32 rval = *rptr;
                int rcnt = 32;  /* number of bits we might check */

                while (rcnt) {
                        /* Get last byte and highest bit from that */
                        u32 pde = ((u32) (((char *)pptr)[7])) << 24;
                        if ((rval ^ pde) & 0x80000000)
                        {
                                /*
                                ** BUMMER!  -- res_map != pdir --
                                ** Dump rval and matching pdir entries
                                */
                                sba_dump_pdir_entry(ioc, msg, pide);
                                return(1);
                        }
                        rcnt--;
                        rval <<= 1;     /* try the next bit */
                        pptr++;
                        pide++;
                }
                rptr++; /* look at next word of res_map */
        }
        /* It'd be nice if we always got here :^) */
        return 0;
}


/**
 * sba_dump_sg - debugging only - print Scatter-Gather list
 * @ioc: IO MMU structure which owns the pdir we are interested in.
 * @startsg: head of the SG list
 * @nents: number of entries in SG list
 *
 * print the SG list so we can verify it's correct by hand.
 */
static void
sba_dump_sg( struct ioc *ioc, struct scatterlist *startsg, int nents)
{
        while (nents-- > 0) {
                printk(KERN_DEBUG " %d : %08lx/%05x %p/%05x\n",
                                nents,
                                (unsigned long) sg_dma_address(startsg),
                                sg_dma_len(startsg),
                                sg_virt_addr(startsg), startsg->length);
                startsg++;
        }
}

#endif /* ASSERT_PDIR_SANITY */




/**************************************************************
*
*   I/O Pdir Resource Management
*
*   Bits set in the resource map are in use.
*   Each bit can represent a number of pages.
*   LSbs represent lower addresses (IOVA's).
*
***************************************************************/
#define PAGES_PER_RANGE 1       /* could increase this to 4 or 8 if needed */

/* Convert from IOVP to IOVA and vice versa. */

#ifdef ZX1_SUPPORT
/* Pluto (aka ZX1) boxes need to set or clear the ibase bits appropriately */
#define SBA_IOVA(ioc,iovp,offset,hint_reg) ((ioc->ibase) | (iovp) | (offset))
#define SBA_IOVP(ioc,iova) ((iova) & (ioc)->iovp_mask)
#else
/* only support Astro and ancestors. Saves a few cycles in key places */
#define SBA_IOVA(ioc,iovp,offset,hint_reg) ((iovp) | (offset))
#define SBA_IOVP(ioc,iova) (iova)
#endif

#define PDIR_INDEX(iovp)   ((iovp)>>IOVP_SHIFT)

#define RESMAP_MASK(n)    (~0UL << (BITS_PER_LONG - (n)))
#define RESMAP_IDX_MASK   (sizeof(unsigned long) - 1)


/**
 * sba_search_bitmap - find free space in IO PDIR resource bitmap
 * @ioc: IO MMU structure which owns the pdir we are interested in.
 * @bits_wanted: number of entries we need.
 *
 * Find consecutive free bits in resource bitmap.
 * Each bit represents one entry in the IO Pdir.
 * Cool perf optimization: search for log2(size) bits at a time.
 */
static SBA_INLINE unsigned long
sba_search_bitmap(struct ioc *ioc, unsigned long bits_wanted)
{
        unsigned long *res_ptr = ioc->res_hint;
        unsigned long *res_end = (unsigned long *) &(ioc->res_map[ioc->res_size]);
        unsigned long pide = ~0UL;

        if (bits_wanted > (BITS_PER_LONG/2)) {
                /* Search word at a time - no mask needed */
                for(; res_ptr < res_end; ++res_ptr) {
                        if (*res_ptr == 0) {
                                *res_ptr = RESMAP_MASK(bits_wanted);
                                pide = ((unsigned long)res_ptr - (unsigned long)ioc->res_map);
                                pide <<= 3;     /* convert to bit address */
                                break;
                        }
                }
                /* point to the next word on next pass */
                res_ptr++;
                ioc->res_bitshift = 0;
        } else {
                /*
                ** Search the resource bit map on well-aligned values.
                ** "o" is the alignment.
                ** We need the alignment to invalidate I/O TLB using
                ** SBA HW features in the unmap path.
                */
                unsigned long o = 1 << get_order(bits_wanted << PAGE_SHIFT);
                uint bitshiftcnt = ROUNDUP(ioc->res_bitshift, o);
                unsigned long mask;

                if (bitshiftcnt >= BITS_PER_LONG) {
                        bitshiftcnt = 0;
                        res_ptr++;
                }
                mask = RESMAP_MASK(bits_wanted) >> bitshiftcnt;

                DBG_RES("%s() o %ld %p", __FUNCTION__, o, res_ptr);
                while(res_ptr < res_end)
                { 
                        DBG_RES("    %p %lx %lx\n", res_ptr, mask, *res_ptr);
                        WARN_ON(mask == 0);
                        if(((*res_ptr) & mask) == 0) {
                                *res_ptr |= mask;     /* mark resources busy! */
                                pide = ((unsigned long)res_ptr - (unsigned long)ioc->res_map);
                                pide <<= 3;     /* convert to bit address */
                                pide += bitshiftcnt;
                                break;
                        }
                        mask >>= o;
                        bitshiftcnt += o;
                        if (mask == 0) {
                                mask = RESMAP_MASK(bits_wanted);
                                bitshiftcnt=0;
                                res_ptr++;
                        }
                }
                /* look in the same word on the next pass */
                ioc->res_bitshift = bitshiftcnt + bits_wanted;
        }

        /* wrapped ? */
        if (res_end <= res_ptr) {
                ioc->res_hint = (unsigned long *) ioc->res_map;
                ioc->res_bitshift = 0;
        } else {
                ioc->res_hint = res_ptr;
        }
        return (pide);
}


/**
 * sba_alloc_range - find free bits and mark them in IO PDIR resource bitmap
 * @ioc: IO MMU structure which owns the pdir we are interested in.
 * @size: number of bytes to create a mapping for
 *
 * Given a size, find consecutive unmarked and then mark those bits in the
 * resource bit map.
 */
static int
sba_alloc_range(struct ioc *ioc, size_t size)
{
        unsigned int pages_needed = size >> IOVP_SHIFT;
#ifdef SBA_COLLECT_STATS
        unsigned long cr_start = mfctl(16);
#endif
        unsigned long pide;

        pide = sba_search_bitmap(ioc, pages_needed);
        if (pide >= (ioc->res_size << 3)) {
                pide = sba_search_bitmap(ioc, pages_needed);
                if (pide >= (ioc->res_size << 3))
                        panic("%s: I/O MMU @ %p is out of mapping resources\n",
                              __FILE__, ioc->ioc_hpa);
        }

#ifdef ASSERT_PDIR_SANITY
        /* verify the first enable bit is clear */
        if(0x00 != ((u8 *) ioc->pdir_base)[pide*sizeof(u64) + 7]) {
                sba_dump_pdir_entry(ioc, "sba_search_bitmap() botched it?", pide);
        }
#endif

        DBG_RES("%s(%x) %d -> %lx hint %x/%x\n",
                __FUNCTION__, size, pages_needed, pide,
                (uint) ((unsigned long) ioc->res_hint - (unsigned long) ioc->res_map),
                ioc->res_bitshift );

#ifdef SBA_COLLECT_STATS
        {
                unsigned long cr_end = mfctl(16);
                unsigned long tmp = cr_end - cr_start;
                /* check for roll over */
                cr_start = (cr_end < cr_start) ?  -(tmp) : (tmp);
        }
        ioc->avg_search[ioc->avg_idx++] = cr_start;
        ioc->avg_idx &= SBA_SEARCH_SAMPLE - 1;

        ioc->used_pages += pages_needed;
#endif

        return (pide);
}


/**
 * sba_free_range - unmark bits in IO PDIR resource bitmap
 * @ioc: IO MMU structure which owns the pdir we are interested in.
 * @iova: IO virtual address which was previously allocated.
 * @size: number of bytes to create a mapping for
 *
 * clear bits in the ioc's resource map
 */
static SBA_INLINE void
sba_free_range(struct ioc *ioc, dma_addr_t iova, size_t size)
{
        unsigned long iovp = SBA_IOVP(ioc, iova);
        unsigned int pide = PDIR_INDEX(iovp);
        unsigned int ridx = pide >> 3;  /* convert bit to byte address */
        unsigned long *res_ptr = (unsigned long *) &((ioc)->res_map[ridx & ~RESMAP_IDX_MASK]);

        int bits_not_wanted = size >> IOVP_SHIFT;

        /* 3-bits "bit" address plus 2 (or 3) bits for "byte" == bit in word */
        unsigned long m = RESMAP_MASK(bits_not_wanted) >> (pide & (BITS_PER_LONG - 1));

        DBG_RES("%s( ,%x,%x) %x/%lx %x %p %lx\n",
                __FUNCTION__, (uint) iova, size,
                bits_not_wanted, m, pide, res_ptr, *res_ptr);

#ifdef SBA_COLLECT_STATS
        ioc->used_pages -= bits_not_wanted;
#endif

        *res_ptr &= ~m;
}


/**************************************************************
*
*   "Dynamic DMA Mapping" support (aka "Coherent I/O")
*
***************************************************************/

#ifdef SBA_HINT_SUPPORT
#define SBA_DMA_HINT(ioc, val) ((val) << (ioc)->hint_shift_pdir)
#endif

typedef unsigned long space_t;
#define KERNEL_SPACE 0

/**
 * sba_io_pdir_entry - fill in one IO PDIR entry
 * @pdir_ptr:  pointer to IO PDIR entry
 * @sid: process Space ID - currently only support KERNEL_SPACE
 * @vba: Virtual CPU address of buffer to map
 * @hint: DMA hint set to use for this mapping
 *
 * SBA Mapping Routine
 *
 * Given a virtual address (vba, arg2) and space id, (sid, arg1)
 * sba_io_pdir_entry() loads the I/O PDIR entry pointed to by
 * pdir_ptr (arg0). 
 * Using the bass-ackwards HP bit numbering, Each IO Pdir entry
 * for Astro/Ike looks like:
 *
 *
 *  0                    19                                 51   55       63
 * +-+---------------------+----------------------------------+----+--------+
 * |V|        U            |            PPN[43:12]            | U  |   VI   |
 * +-+---------------------+----------------------------------+----+--------+
 *
 * Pluto is basically identical, supports fewer physical address bits:
 *
 *  0                       23                              51   55       63
 * +-+------------------------+-------------------------------+----+--------+
 * |V|        U               |         PPN[39:12]            | U  |   VI   |
 * +-+------------------------+-------------------------------+----+--------+
 *
 *  V  == Valid Bit  (Most Significant Bit is bit 0)
 *  U  == Unused
 * PPN == Physical Page Number
 * VI  == Virtual Index (aka Coherent Index)
 *
 * LPA instruction output is put into PPN field.
 * LCI (Load Coherence Index) instruction provides the "VI" bits.
 *
 * We pre-swap the bytes since PCX-W is Big Endian and the
 * IOMMU uses little endian for the pdir.
 */

void SBA_INLINE
sba_io_pdir_entry(u64 *pdir_ptr, space_t sid, unsigned long vba,
                  unsigned long hint)
{
        u64 pa; /* physical address */
        register unsigned ci; /* coherent index */

        pa = virt_to_phys(vba);
        pa &= IOVP_MASK;

        mtsp(sid,1);
        asm("lci 0(%%sr1, %1), %0" : "=r" (ci) : "r" (vba));
        pa |= (ci >> 12) & 0xff;  /* move CI (8 bits) into lowest byte */

        pa |= 0x8000000000000000ULL;    /* set "valid" bit */
        *pdir_ptr = cpu_to_le64(pa);    /* swap and store into I/O Pdir */

        /*
         * If the PDC_MODEL capabilities has Non-coherent IO-PDIR bit set
         * (bit #61, big endian), we have to flush and sync every time
         * IO-PDIR is changed in Ike/Astro.
         */
        if (ioc_needs_fdc)
                asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr));
}


/**
 * sba_mark_invalid - invalidate one or more IO PDIR entries
 * @ioc: IO MMU structure which owns the pdir we are interested in.
 * @iova:  IO Virtual Address mapped earlier
 * @byte_cnt:  number of bytes this mapping covers.
 *
 * Marking the IO PDIR entry(ies) as Invalid and invalidate
 * corresponding IO TLB entry. The Ike PCOM (Purge Command Register)
 * is to purge stale entries in the IO TLB when unmapping entries.
 *
 * The PCOM register supports purging of multiple pages, with a minium
 * of 1 page and a maximum of 2GB. Hardware requires the address be
 * aligned to the size of the range being purged. The size of the range
 * must be a power of 2. The "Cool perf optimization" in the
 * allocation routine helps keep that true.
 */
static SBA_INLINE void
sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
{
        u32 iovp = (u32) SBA_IOVP(ioc,iova);
        u64 *pdir_ptr = &ioc->pdir_base[PDIR_INDEX(iovp)];

#ifdef ASSERT_PDIR_SANITY
        /* Assert first pdir entry is set.
        **
        ** Even though this is a big-endian machine, the entries
        ** in the iopdir are little endian. That's why we look at
        ** the byte at +7 instead of at +0.
        */
        if (0x80 != (((u8 *) pdir_ptr)[7])) {
                sba_dump_pdir_entry(ioc,"sba_mark_invalid()", PDIR_INDEX(iovp));
        }
#endif

        if (byte_cnt > IOVP_SIZE)
        {
#if 0
                unsigned long entries_per_cacheline = ioc_needs_fdc ?
                                L1_CACHE_ALIGN(((unsigned long) pdir_ptr))
                                        - (unsigned long) pdir_ptr;
                                : 262144;
#endif

                /* set "size" field for PCOM */
                iovp |= get_order(byte_cnt) + PAGE_SHIFT;

                do {
                        /* clear I/O Pdir entry "valid" bit first */
                        ((u8 *) pdir_ptr)[7] = 0;
                        if (ioc_needs_fdc) {
                                asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr));
#if 0
                                entries_per_cacheline = L1_CACHE_SHIFT - 3;
#endif
                        }
                        pdir_ptr++;
                        byte_cnt -= IOVP_SIZE;
                } while (byte_cnt > IOVP_SIZE);
        } else
                iovp |= IOVP_SHIFT;     /* set "size" field for PCOM */

        /*
        ** clear I/O PDIR entry "valid" bit.
        ** We have to R/M/W the cacheline regardless how much of the
        ** pdir entry that we clobber.
        ** The rest of the entry would be useful for debugging if we
        ** could dump core on HPMC.
        */
        ((u8 *) pdir_ptr)[7] = 0;
        if (ioc_needs_fdc)
                asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr));

        WRITE_REG( SBA_IOVA(ioc, iovp, 0, 0), ioc->ioc_hpa+IOC_PCOM);
}

/**
 * sba_dma_supported - PCI driver can query DMA support
 * @dev: instance of PCI owned by the driver that's asking
 * @mask:  number of address bits this PCI device can handle
 *
 * See Documentation/DMA-mapping.txt
 */
static int sba_dma_supported( struct device *dev, u64 mask)
{
        struct ioc *ioc;

        if (dev == NULL) {
                printk(KERN_ERR MODULE_NAME ": EISA/ISA/et al not supported\n");
                BUG();
                return(0);
        }

        /* Documentation/DMA-mapping.txt tells drivers to try 64-bit first,
         * then fall back to 32-bit if that fails.
         * We are just "encouraging" 32-bit DMA masks here since we can
         * never allow IOMMU bypass unless we add special support for ZX1.
         */
        if (mask > ~0U)
                return 0;

        ioc = GET_IOC(dev);

        /*
         * check if mask is >= than the current max IO Virt Address
         * The max IO Virt address will *always* < 30 bits.
         */
        return((int)(mask >= (ioc->ibase - 1 +
                        (ioc->pdir_size / sizeof(u64) * IOVP_SIZE) )));
}


/**
 * sba_map_single - map one buffer and return IOVA for DMA
 * @dev: instance of PCI owned by the driver that's asking.
 * @addr:  driver buffer to map.
 * @size:  number of bytes to map in driver buffer.
 * @direction:  R/W or both.
 *
 * See Documentation/DMA-mapping.txt
 */
static dma_addr_t
sba_map_single(struct device *dev, void *addr, size_t size,
               enum dma_data_direction direction)
{
        struct ioc *ioc;
        unsigned long flags; 
        dma_addr_t iovp;
        dma_addr_t offset;
        u64 *pdir_start;
        int pide;

        ioc = GET_IOC(dev);

        /* save offset bits */
        offset = ((dma_addr_t) (long) addr) & ~IOVP_MASK;

        /* round up to nearest IOVP_SIZE */
        size = (size + offset + ~IOVP_MASK) & IOVP_MASK;

        spin_lock_irqsave(&ioc->res_lock, flags);
#ifdef ASSERT_PDIR_SANITY
        sba_check_pdir(ioc,"Check before sba_map_single()");
#endif

#ifdef SBA_COLLECT_STATS
        ioc->msingle_calls++;
        ioc->msingle_pages += size >> IOVP_SHIFT;
#endif
        pide = sba_alloc_range(ioc, size);
        iovp = (dma_addr_t) pide << IOVP_SHIFT;

        DBG_RUN("%s() 0x%p -> 0x%lx\n",
                __FUNCTION__, addr, (long) iovp | offset);

        pdir_start = &(ioc->pdir_base[pide]);

        while (size > 0) {
                sba_io_pdir_entry(pdir_start, KERNEL_SPACE, (unsigned long) addr, 0);

                DBG_RUN("       pdir 0x%p %02x%02x%02x%02x%02x%02x%02x%02x\n",
                        pdir_start,
                        (u8) (((u8 *) pdir_start)[7]),
                        (u8) (((u8 *) pdir_start)[6]),
                        (u8) (((u8 *) pdir_start)[5]),
                        (u8) (((u8 *) pdir_start)[4]),
                        (u8) (((u8 *) pdir_start)[3]),
                        (u8) (((u8 *) pdir_start)[2]),
                        (u8) (((u8 *) pdir_start)[1]),
                        (u8) (((u8 *) pdir_start)[0])
                        );

                addr += IOVP_SIZE;
                size -= IOVP_SIZE;
                pdir_start++;
        }

        /* force FDC ops in io_pdir_entry() to be visible to IOMMU */
        if (ioc_needs_fdc)
                asm volatile("sync" : : );

#ifdef ASSERT_PDIR_SANITY
        sba_check_pdir(ioc,"Check after sba_map_single()");
#endif
        spin_unlock_irqrestore(&ioc->res_lock, flags);

        /* form complete address */
        return SBA_IOVA(ioc, iovp, offset, DEFAULT_DMA_HINT_REG);
}


/**
 * sba_unmap_single - unmap one IOVA and free resources
 * @dev: instance of PCI owned by the driver that's asking.
 * @iova:  IOVA of driver buffer previously mapped.
 * @size:  number of bytes mapped in driver buffer.
 * @direction:  R/W or both.
 *
 * See Documentation/DMA-mapping.txt
 */
static void
sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size,
                 enum dma_data_direction direction)
{
        struct ioc *ioc;
#if DELAYED_RESOURCE_CNT > 0
        struct sba_dma_pair *d;
#endif
        unsigned long flags; 
        dma_addr_t offset;

        DBG_RUN("%s() iovp 0x%lx/%x\n", __FUNCTION__, (long) iova, size);

        ioc = GET_IOC(dev);
        offset = iova & ~IOVP_MASK;
        iova ^= offset;        /* clear offset bits */
        size += offset;
        size = ROUNDUP(size, IOVP_SIZE);

        spin_lock_irqsave(&ioc->res_lock, flags);

#ifdef SBA_COLLECT_STATS
        ioc->usingle_calls++;
        ioc->usingle_pages += size >> IOVP_SHIFT;
#endif

        sba_mark_invalid(ioc, iova, size);

#if DELAYED_RESOURCE_CNT > 0
        /* Delaying when we re-use a IO Pdir entry reduces the number
         * of MMIO reads needed to flush writes to the PCOM register.
         */
        d = &(ioc->saved[ioc->saved_cnt]);
        d->iova = iova;
        d->size = size;
        if (++(ioc->saved_cnt) >= DELAYED_RESOURCE_CNT) {
                int cnt = ioc->saved_cnt;
                while (cnt--) {
                        sba_free_range(ioc, d->iova, d->size);
                        d--;
                }
                ioc->saved_cnt = 0;

                READ_REG(ioc->ioc_hpa+IOC_PCOM);        /* flush purges */
        }
#else /* DELAYED_RESOURCE_CNT == 0 */
        sba_free_range(ioc, iova, size);

        /* If fdc's were issued, force fdc's to be visible now */
        if (ioc_needs_fdc)
                asm volatile("sync" : : );

        READ_REG(ioc->ioc_hpa+IOC_PCOM);        /* flush purges */
#endif /* DELAYED_RESOURCE_CNT == 0 */

        spin_unlock_irqrestore(&ioc->res_lock, flags);

        /* XXX REVISIT for 2.5 Linux - need syncdma for zero-copy support.
        ** For Astro based systems this isn't a big deal WRT performance.
        ** As long as 2.4 kernels copyin/copyout data from/to userspace,
        ** we don't need the syncdma. The issue here is I/O MMU cachelines
        ** are *not* coherent in all cases.  May be hwrev dependent.
        ** Need to investigate more.
        asm volatile("syncdma");        
        */
}


/**
 * sba_alloc_consistent - allocate/map shared mem for DMA
 * @hwdev: instance of PCI owned by the driver that's asking.
 * @size:  number of bytes mapped in driver buffer.
 * @dma_handle:  IOVA of new buffer.
 *
 * See Documentation/DMA-mapping.txt
 */
static void *sba_alloc_consistent(struct device *hwdev, size_t size,
                                        dma_addr_t *dma_handle, gfp_t gfp)
{
        void *ret;

        if (!hwdev) {
                /* only support PCI */
                *dma_handle = 0;
                return 0;
        }

        ret = (void *) __get_free_pages(gfp, get_order(size));

        if (ret) {
                memset(ret, 0, size);
                *dma_handle = sba_map_single(hwdev, ret, size, 0);
        }

        return ret;
}


/**
 * sba_free_consistent - free/unmap shared mem for DMA
 * @hwdev: instance of PCI owned by the driver that's asking.
 * @size:  number of bytes mapped in driver buffer.
 * @vaddr:  virtual address IOVA of "consistent" buffer.
 * @dma_handler:  IO virtual address of "consistent" buffer.
 *
 * See Documentation/DMA-mapping.txt
 */
static void
sba_free_consistent(struct device *hwdev, size_t size, void *vaddr,
                    dma_addr_t dma_handle)
{
        sba_unmap_single(hwdev, dma_handle, size, 0);
        free_pages((unsigned long) vaddr, get_order(size));
}


/*
** Since 0 is a valid pdir_base index value, can't use that
** to determine if a value is valid or not. Use a flag to indicate
** the SG list entry contains a valid pdir index.
*/
#define PIDE_FLAG 0x80000000UL

#ifdef SBA_COLLECT_STATS
#define IOMMU_MAP_STATS
#endif
#include "iommu-helpers.h"

#ifdef DEBUG_LARGE_SG_ENTRIES
int dump_run_sg = 0;
#endif


/**
 * sba_map_sg - map Scatter/Gather list
 * @dev: instance of PCI owned by the driver that's asking.
 * @sglist:  array of buffer/length pairs
 * @nents:  number of entries in list
 * @direction:  R/W or both.
 *
 * See Documentation/DMA-mapping.txt
 */
static int
sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
           enum dma_data_direction direction)
{
        struct ioc *ioc;
        int coalesced, filled = 0;
        unsigned long flags;

        DBG_RUN_SG("%s() START %d entries\n", __FUNCTION__, nents);

        ioc = GET_IOC(dev);

        /* Fast path single entry scatterlists. */
        if (nents == 1) {
                sg_dma_address(sglist) = sba_map_single(dev,
                                                (void *)sg_virt_addr(sglist),
                                                sglist->length, direction);
                sg_dma_len(sglist)     = sglist->length;
                return 1;
        }

        spin_lock_irqsave(&ioc->res_lock, flags);

#ifdef ASSERT_PDIR_SANITY
        if (sba_check_pdir(ioc,"Check before sba_map_sg()"))
        {
                sba_dump_sg(ioc, sglist, nents);
                panic("Check before sba_map_sg()");
        }
#endif

#ifdef SBA_COLLECT_STATS
        ioc->msg_calls++;
#endif

        /*
        ** First coalesce the chunks and allocate I/O pdir space
        **
        ** If this is one DMA stream, we can properly map using the
        ** correct virtual address associated with each DMA page.
        ** w/o this association, we wouldn't have coherent DMA!
        ** Access to the virtual address is what forces a two pass algorithm.
        */
        coalesced = iommu_coalesce_chunks(ioc, sglist, nents, sba_alloc_range);

        /*
        ** Program the I/O Pdir
        **
        ** map the virtual addresses to the I/O Pdir
        ** o dma_address will contain the pdir index
        ** o dma_len will contain the number of bytes to map 
        ** o address contains the virtual address.
        */
        filled = iommu_fill_pdir(ioc, sglist, nents, 0, sba_io_pdir_entry);

        /* force FDC ops in io_pdir_entry() to be visible to IOMMU */
        if (ioc_needs_fdc)
                asm volatile("sync" : : );

#ifdef ASSERT_PDIR_SANITY
        if (sba_check_pdir(ioc,"Check after sba_map_sg()"))
        {
                sba_dump_sg(ioc, sglist, nents);
                panic("Check after sba_map_sg()\n");
        }
#endif

        spin_unlock_irqrestore(&ioc->res_lock, flags);

        DBG_RUN_SG("%s() DONE %d mappings\n", __FUNCTION__, filled);

        return filled;
}


/**
 * sba_unmap_sg - unmap Scatter/Gather list
 * @dev: instance of PCI owned by the driver that's asking.
 * @sglist:  array of buffer/length pairs
 * @nents:  number of entries in list
 * @direction:  R/W or both.
 *
 * See Documentation/DMA-mapping.txt
 */
static void 
sba_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents,
             enum dma_data_direction direction)
{
        struct ioc *ioc;
#ifdef ASSERT_PDIR_SANITY
        unsigned long flags;
#endif

        DBG_RUN_SG("%s() START %d entries,  %p,%x\n",
                __FUNCTION__, nents, sg_virt_addr(sglist), sglist->length);

        ioc = GET_IOC(dev);

#ifdef SBA_COLLECT_STATS
        ioc->usg_calls++;
#endif

#ifdef ASSERT_PDIR_SANITY
        spin_lock_irqsave(&ioc->res_lock, flags);
        sba_check_pdir(ioc,"Check before sba_unmap_sg()");
        spin_unlock_irqrestore(&ioc->res_lock, flags);
#endif

        while (sg_dma_len(sglist) && nents--) {

                sba_unmap_single(dev, sg_dma_address(sglist), sg_dma_len(sglist), direction);
#ifdef SBA_COLLECT_STATS
                ioc->usg_pages += ((sg_dma_address(sglist) & ~IOVP_MASK) + sg_dma_len(sglist) + IOVP_SIZE - 1) >> PAGE_SHIFT;
                ioc->usingle_calls--;   /* kluge since call is unmap_sg() */
#endif
                ++sglist;
        }

        DBG_RUN_SG("%s() DONE (nents %d)\n", __FUNCTION__,  nents);

#ifdef ASSERT_PDIR_SANITY
        spin_lock_irqsave(&ioc->res_lock, flags);
        sba_check_pdir(ioc,"Check after sba_unmap_sg()");
        spin_unlock_irqrestore(&ioc->res_lock, flags);
#endif

}

static struct hppa_dma_ops sba_ops = {
        .dma_supported =        sba_dma_supported,
        .alloc_consistent =     sba_alloc_consistent,
        .alloc_noncoherent =    sba_alloc_consistent,
        .free_consistent =      sba_free_consistent,
        .map_single =           sba_map_single,
        .unmap_single =         sba_unmap_single,
        .map_sg =               sba_map_sg,
        .unmap_sg =             sba_unmap_sg,
        .dma_sync_single_for_cpu =      NULL,
        .dma_sync_single_for_device =   NULL,
        .dma_sync_sg_for_cpu =          NULL,
        .dma_sync_sg_for_device =       NULL,
};


/**************************************************************************
**
**   SBA PAT PDC support
**
**   o call pdc_pat_cell_module()
**   o store ranges in PCI "resource" structures
**
**************************************************************************/

static void
sba_get_pat_resources(struct sba_device *sba_dev)
{
#if 0
/*
** TODO/REVISIT/FIXME: support for directed ranges requires calls to
**      PAT PDC to program the SBA/LBA directed range registers...this
**      burden may fall on the LBA code since it directly supports the
**      PCI subsystem. It's not clear yet. - ggg
*/
PAT_MOD(mod)->mod_info.mod_pages   = PAT_GET_MOD_PAGES(temp);
        FIXME : ???
PAT_MOD(mod)->mod_info.dvi         = PAT_GET_DVI(temp);
        Tells where the dvi bits are located in the address.
PAT_MOD(mod)->mod_info.ioc         = PAT_GET_IOC(temp);
        FIXME : ???
#endif
}


/**************************************************************
*
*   Initialization and claim
*
***************************************************************/
#define PIRANHA_ADDR_MASK       0x00160000UL /* bit 17,18,20 */
#define PIRANHA_ADDR_VAL        0x00060000UL /* bit 17,18 on */
static void *
sba_alloc_pdir(unsigned int pdir_size)
{
        unsigned long pdir_base;
        unsigned long pdir_order = get_order(pdir_size);

        pdir_base = __get_free_pages(GFP_KERNEL, pdir_order);
        if (NULL == (void *) pdir_base) {
                panic("%s() could not allocate I/O Page Table\n",
                        __FUNCTION__);
        }

        /* If this is not PA8700 (PCX-W2)
        **      OR newer than ver 2.2
        **      OR in a system that doesn't need VINDEX bits from SBA,
        **
        ** then we aren't exposed to the HW bug.
        */
        if ( ((boot_cpu_data.pdc.cpuid >> 5) & 0x7f) != 0x13
                        || (boot_cpu_data.pdc.versions > 0x202)
                        || (boot_cpu_data.pdc.capabilities & 0x08L) )
                return (void *) pdir_base;

        /*
         * PA8700 (PCX-W2, aka piranha) silent data corruption fix
         *
         * An interaction between PA8700 CPU (Ver 2.2 or older) and
         * Ike/Astro can cause silent data corruption. This is only
         * a problem if the I/O PDIR is located in memory such that
         * (little-endian)  bits 17 and 18 are on and bit 20 is off.
         *
         * Since the max IO Pdir size is 2MB, by cleverly allocating the
         * right physical address, we can either avoid (IOPDIR <= 1MB)
         * or minimize (2MB IO Pdir) the problem if we restrict the
         * IO Pdir to a maximum size of 2MB-128K (1902K).
         *
         * Because we always allocate 2^N sized IO pdirs, either of the
         * "bad" regions will be the last 128K if at all. That's easy
         * to test for.
         * 
         */
        if (pdir_order <= (19-12)) {
                if (((virt_to_phys(pdir_base)+pdir_size-1) & PIRANHA_ADDR_MASK) == PIRANHA_ADDR_VAL) {
                        /* allocate a new one on 512k alignment */
                        unsigned long new_pdir = __get_free_pages(GFP_KERNEL, (19-12));
                        /* release original */
                        free_pages(pdir_base, pdir_order);

                        pdir_base = new_pdir;

                        /* release excess */
                        while (pdir_order < (19-12)) {
                                new_pdir += pdir_size;
                                free_pages(new_pdir, pdir_order);
                                pdir_order +=1;
                                pdir_size <<=1;
                        }
                }
        } else {
                /*
                ** 1MB or 2MB Pdir
                ** Needs to be aligned on an "odd" 1MB boundary.
                */
                unsigned long new_pdir = __get_free_pages(GFP_KERNEL, pdir_order+1); /* 2 or 4MB */

                /* release original */
                free_pages( pdir_base, pdir_order);

                /* release first 1MB */
                free_pages(new_pdir, 20-12);

                pdir_base = new_pdir + 1024*1024;

                if (pdir_order > (20-12)) {
                        /*
                        ** 2MB Pdir.
                        **
                        ** Flag tells init_bitmap() to mark bad 128k as used
                        ** and to reduce the size by 128k.
                        */
                        piranha_bad_128k = 1;

                        new_pdir += 3*1024*1024;
                        /* release last 1MB */
                        free_pages(new_pdir, 20-12);

                        /* release unusable 128KB */
                        free_pages(new_pdir - 128*1024 , 17-12);

                        pdir_size -= 128*1024;
                }
        }

        memset((void *) pdir_base, 0, pdir_size);
        return (void *) pdir_base;
}

static struct device *next_device(struct klist_iter *i)
{
        struct klist_node * n = klist_next(i);
        return n ? container_of(n, struct device, knode_parent) : NULL;
}

/* setup Mercury or Elroy IBASE/IMASK registers. */
static void 
setup_ibase_imask(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
{
        /* lba_set_iregs() is in drivers/parisc/lba_pci.c */
        extern void lba_set_iregs(struct parisc_device *, u32, u32);
        struct device *dev;
        struct klist_iter i;

        klist_iter_init(&sba->dev.klist_children, &i);
        while ((dev = next_device(&i))) {
                struct parisc_device *lba = to_parisc_device(dev);
                int rope_num = (lba->hpa.start >> 13) & 0xf;
                if (rope_num >> 3 == ioc_num)
                        lba_set_iregs(lba, ioc->ibase, ioc->imask);
        }
        klist_iter_exit(&i);
}

static void
sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
{
        u32 iova_space_mask;
        u32 iova_space_size;
        int iov_order, tcnfg;
#ifdef SBA_AGP_SUPPORT
        int agp_found = 0;
#endif
        /*
        ** Firmware programs the base and size of a "safe IOVA space"
        ** (one that doesn't overlap memory or LMMIO space) in the
        ** IBASE and IMASK registers.
        */
        ioc->ibase = READ_REG(ioc->ioc_hpa + IOC_IBASE);
        iova_space_size = ~(READ_REG(ioc->ioc_hpa + IOC_IMASK) & 0xFFFFFFFFUL) + 1;

        if ((ioc->ibase < 0xfed00000UL) && ((ioc->ibase + iova_space_size) > 0xfee00000UL)) {
                printk("WARNING: IOV space overlaps local config and interrupt message, truncating\n");
                iova_space_size /= 2;
        }

        /*
        ** iov_order is always based on a 1GB IOVA space since we want to
        ** turn on the other half for AGP GART.
        */
        iov_order = get_order(iova_space_size >> (IOVP_SHIFT - PAGE_SHIFT));
        ioc->pdir_size = (iova_space_size / IOVP_SIZE) * sizeof(u64);

        DBG_INIT("%s() hpa 0x%p IOV %dMB (%d bits)\n",
                __FUNCTION__, ioc->ioc_hpa, iova_space_size >> 20,
                iov_order + PAGE_SHIFT);

        ioc->pdir_base = (void *) __get_free_pages(GFP_KERNEL,
                                                   get_order(ioc->pdir_size));
        if (!ioc->pdir_base)
                panic("Couldn't allocate I/O Page Table\n");

        memset(ioc->pdir_base, 0, ioc->pdir_size);

        DBG_INIT("%s() pdir %p size %x\n",
                        __FUNCTION__, ioc->pdir_base, ioc->pdir_size);

#ifdef SBA_HINT_SUPPORT
        ioc->hint_shift_pdir = iov_order + PAGE_SHIFT;
        ioc->hint_mask_pdir = ~(0x3 << (iov_order + PAGE_SHIFT));

        DBG_INIT("      hint_shift_pdir %x hint_mask_pdir %lx\n",
                ioc->hint_shift_pdir, ioc->hint_mask_pdir);
#endif

        WARN_ON((((unsigned long) ioc->pdir_base) & PAGE_MASK) != (unsigned long) ioc->pdir_base);
        WRITE_REG(virt_to_phys(ioc->pdir_base), ioc->ioc_hpa + IOC_PDIR_BASE);

        /* build IMASK for IOC and Elroy */
        iova_space_mask =  0xffffffff;
        iova_space_mask <<= (iov_order + PAGE_SHIFT);
        ioc->imask = iova_space_mask;
#ifdef ZX1_SUPPORT
        ioc->iovp_mask = ~(iova_space_mask + PAGE_SIZE - 1);
#endif
        sba_dump_tlb(ioc->ioc_hpa);

        setup_ibase_imask(sba, ioc, ioc_num);

        WRITE_REG(ioc->imask, ioc->ioc_hpa + IOC_IMASK);

#ifdef CONFIG_64BIT
        /*
        ** Setting the upper bits makes checking for bypass addresses
        ** a little faster later on.
        */
        ioc->imask |= 0xFFFFFFFF00000000UL;
#endif

        /* Set I/O PDIR Page size to system page size */
        switch (PAGE_SHIFT) {
                case 12: tcnfg = 0; break;      /*  4K */
                case 13: tcnfg = 1; break;      /*  8K */
                case 14: tcnfg = 2; break;      /* 16K */
                case 16: tcnfg = 3; break;      /* 64K */
                default:
                        panic(__FILE__ "Unsupported system page size %d",
                                1 << PAGE_SHIFT);
                        break;
        }
        WRITE_REG(tcnfg, ioc->ioc_hpa + IOC_TCNFG);

        /*
        ** Program the IOC's ibase and enable IOVA translation
        ** Bit zero == enable bit.
        */
        WRITE_REG(ioc->ibase | 1, ioc->ioc_hpa + IOC_IBASE);

        /*
        ** Clear I/O TLB of any possible entries.
        ** (Yes. This is a bit paranoid...but so what)
        */
        WRITE_REG(ioc->ibase | 31, ioc->ioc_hpa + IOC_PCOM);

#ifdef SBA_AGP_SUPPORT
        /*
        ** If an AGP device is present, only use half of the IOV space
        ** for PCI DMA.  Unfortunately we can't know ahead of time
        ** whether GART support will actually be used, for now we
        ** can just key on any AGP device found in the system.
        ** We program the next pdir index after we stop w/ a key for
        ** the GART code to handshake on.
        */
        device=NULL;
        for (lba = sba->child; lba; lba = lba->sibling) {
                if (IS_QUICKSILVER(lba))
                        break;
        }

        if (lba) {
                DBG_INIT("%s: Reserving half of IOVA space for AGP GART support\n", __FUNCTION__);
                ioc->pdir_size /= 2;
                ((u64 *)ioc->pdir_base)[PDIR_INDEX(iova_space_size/2)] = SBA_IOMMU_COOKIE;
        } else {
                DBG_INIT("%s: No GART needed - no AGP controller found\n", __FUNCTION__);
        }
#endif /* 0 */

}

static void
sba_ioc_init(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
{
        u32 iova_space_size, iova_space_mask;
        unsigned int pdir_size, iov_order;

        /*
        ** Determine IOVA Space size from memory size.
        **
        ** Ideally, PCI drivers would register the maximum number
        ** of DMA they can have outstanding for each device they
        ** own.  Next best thing would be to guess how much DMA
        ** can be outstanding based on PCI Class/sub-class. Both
        ** methods still require some "extra" to support PCI
        ** Hot-Plug/Removal of PCI cards. (aka PCI OLARD).
        **
        ** While we have 32-bits "IOVA" space, top two 2 bits are used
        ** for DMA hints - ergo only 30 bits max.
        */

        iova_space_size = (u32) (num_physpages/global_ioc_cnt);

        /* limit IOVA space size to 1MB-1GB */
        if (iova_space_size < (1 << (20 - PAGE_SHIFT))) {
                iova_space_size = 1 << (20 - PAGE_SHIFT);
        }
        else if (iova_space_size > (1 << (30 - PAGE_SHIFT))) {
                iova_space_size = 1 << (30 - PAGE_SHIFT);
        }

        /*
        ** iova space must be log2() in size.
        ** thus, pdir/res_map will also be log2().
        ** PIRANHA BUG: Exception is when IO Pdir is 2MB (gets reduced)
        */
        iov_order = get_order(iova_space_size << PAGE_SHIFT);

        /* iova_space_size is now bytes, not pages */
        iova_space_size = 1 << (iov_order + PAGE_SHIFT);

        ioc->pdir_size = pdir_size = (iova_space_size/IOVP_SIZE) * sizeof(u64);

        DBG_INIT("%s() hpa 0x%lx mem %ldMB IOV %dMB (%d bits)\n",
                        __FUNCTION__,
                        ioc->ioc_hpa,
                        (unsigned long) num_physpages >> (20 - PAGE_SHIFT),
                        iova_space_size>>20,
                        iov_order + PAGE_SHIFT);

        ioc->pdir_base = sba_alloc_pdir(pdir_size);

        DBG_INIT("%s() pdir %p size %x\n",
                        __FUNCTION__, ioc->pdir_base, pdir_size);

#ifdef SBA_HINT_SUPPORT
        /* FIXME : DMA HINTs not used */
        ioc->hint_shift_pdir = iov_order + PAGE_SHIFT;
        ioc->hint_mask_pdir = ~(0x3 << (iov_order + PAGE_SHIFT));

        DBG_INIT("      hint_shift_pdir %x hint_mask_pdir %lx\n",
                        ioc->hint_shift_pdir, ioc->hint_mask_pdir);
#endif

        WRITE_REG64(virt_to_phys(ioc->pdir_base), ioc->ioc_hpa + IOC_PDIR_BASE);

        /* build IMASK for IOC and Elroy */
        iova_space_mask =  0xffffffff;
        iova_space_mask <<= (iov_order + PAGE_SHIFT);

        /*
        ** On C3000 w/512MB mem, HP-UX 10.20 reports:
        **     ibase=0, imask=0xFE000000, size=0x2000000.
        */
        ioc->ibase = 0;
        ioc->imask = iova_space_mask;   /* save it */
#ifdef ZX1_SUPPORT
        ioc->iovp_mask = ~(iova_space_mask + PAGE_SIZE - 1);
#endif

        DBG_INIT("%s() IOV base 0x%lx mask 0x%0lx\n",
                __FUNCTION__, ioc->ibase, ioc->imask);

        /*
        ** FIXME: Hint registers are programmed with default hint
        ** values during boot, so hints should be sane even if we
        ** can't reprogram them the way drivers want.
        */

        setup_ibase_imask(sba, ioc, ioc_num);

        /*
        ** Program the IOC's ibase and enable IOVA translation
        */
        WRITE_REG(ioc->ibase | 1, ioc->ioc_hpa+IOC_IBASE);
        WRITE_REG(ioc->imask, ioc->ioc_hpa+IOC_IMASK);

        /* Set I/O PDIR Page size to 4K */
        WRITE_REG(0, ioc->ioc_hpa+IOC_TCNFG);

        /*
        ** Clear I/O TLB of any possible entries.
        ** (Yes. This is a bit paranoid...but so what)
        */
        WRITE_REG(0 | 31, ioc->ioc_hpa+IOC_PCOM);

        ioc->ibase = 0; /* used by SBA_IOVA and related macros */       

        DBG_INIT("%s() DONE\n", __FUNCTION__);
}



/**************************************************************************
**
**   SBA initialization code (HW and SW)
**
**   o identify SBA chip itself
**   o initialize SBA chip modes (HardFail)
**   o initialize SBA chip modes (HardFail)
**   o FIXME: initialize DMA hints for reasonable defaults
**
**************************************************************************/

static void __iomem *ioc_remap(struct sba_device *sba_dev, unsigned int offset)
{
        return ioremap_nocache(sba_dev->dev->hpa.start + offset, SBA_FUNC_SIZE);
}

static void sba_hw_init(struct sba_device *sba_dev)
{ 
        int i;
        int num_ioc;
        u64 ioc_ctl;

        if (!is_pdc_pat()) {
                /* Shutdown the USB controller on Astro-based workstations.
                ** Once we reprogram the IOMMU, the next DMA performed by
                ** USB will HPMC the box. USB is only enabled if a
                ** keyboard is present and found.
                **
                ** With serial console, j6k v5.0 firmware says:
                **   mem_kbd hpa 0xfee003f8 sba 0x0 pad 0x0 cl_class 0x7
                **
                ** FIXME: Using GFX+USB console at power up but direct
                **      linux to serial console is still broken.
                **      USB could generate DMA so we must reset USB.
                **      The proper sequence would be:
                **      o block console output
                **      o reset USB device
                **      o reprogram serial port
                **      o unblock console output
                */
                if (PAGE0->mem_kbd.cl_class == CL_KEYBD) {
                        pdc_io_reset_devices();
                }

        }


#if 0
printk("sba_hw_init(): mem_boot 0x%x 0x%x 0x%x 0x%x\n", PAGE0->mem_boot.hpa,
        PAGE0->mem_boot.spa, PAGE0->mem_boot.pad, PAGE0->mem_boot.cl_class);

        /*
        ** Need to deal with DMA from LAN.
        **      Maybe use page zero boot device as a handle to talk
        **      to PDC about which device to shutdown.
        **
        ** Netbooting, j6k v5.0 firmware says:
        **      mem_boot hpa 0xf4008000 sba 0x0 pad 0x0 cl_class 0x1002
        ** ARGH! invalid class.
        */
        if ((PAGE0->mem_boot.cl_class != CL_RANDOM)
                && (PAGE0->mem_boot.cl_class != CL_SEQU)) {
                        pdc_io_reset();
        }
#endif

        if (!IS_PLUTO(sba_dev->iodc)) {
                ioc_ctl = READ_REG(sba_dev->sba_hpa+IOC_CTRL);
                DBG_INIT("%s() hpa 0x%lx ioc_ctl 0x%Lx ->",
                        __FUNCTION__, sba_dev->sba_hpa, ioc_ctl);
                ioc_ctl &= ~(IOC_CTRL_RM | IOC_CTRL_NC | IOC_CTRL_CE);
                ioc_ctl |= IOC_CTRL_DD | IOC_CTRL_D4 | IOC_CTRL_TC;
                        /* j6700 v1.6 firmware sets 0x294f */
                        /* A500 firmware sets 0x4d */

                WRITE_REG(ioc_ctl, sba_dev->sba_hpa+IOC_CTRL);

#ifdef DEBUG_SBA_INIT
                ioc_ctl = READ_REG64(sba_dev->sba_hpa+IOC_CTRL);
                DBG_INIT(" 0x%Lx\n", ioc_ctl);
#endif
        } /* if !PLUTO */

        if (IS_ASTRO(sba_dev->iodc)) {
                int err;
                sba_dev->ioc[0].ioc_hpa = ioc_remap(sba_dev, ASTRO_IOC_OFFSET);
                num_ioc = 1;

                sba_dev->chip_resv.name = "Astro Intr Ack";
                sba_dev->chip_resv.start = PCI_F_EXTEND | 0xfef00000UL;
                sba_dev->chip_resv.end   = PCI_F_EXTEND | (0xff000000UL - 1) ;
                err = request_resource(&iomem_resource, &(sba_dev->chip_resv));
                BUG_ON(err < 0);

        } else if (IS_PLUTO(sba_dev->iodc)) {
                int err;

                sba_dev->ioc[0].ioc_hpa = ioc_remap(sba_dev, PLUTO_IOC_OFFSET);
                num_ioc = 1;

                sba_dev->chip_resv.name = "Pluto Intr/PIOP/VGA";
                sba_dev->chip_resv.start = PCI_F_EXTEND | 0xfee00000UL;
                sba_dev->chip_resv.end   = PCI_F_EXTEND | (0xff200000UL - 1);
                err = request_resource(&iomem_resource, &(sba_dev->chip_resv));
                WARN_ON(err < 0);

                sba_dev->iommu_resv.name = "IOVA Space";
                sba_dev->iommu_resv.start = 0x40000000UL;
                sba_dev->iommu_resv.end   = 0x50000000UL - 1;
                err = request_resource(&iomem_resource, &(sba_dev->iommu_resv));
                WARN_ON(err < 0);
        } else {
                /* IKE, REO */
                sba_dev->ioc[0].ioc_hpa = ioc_remap(sba_dev, IKE_IOC_OFFSET(0));
                sba_dev->ioc[1].ioc_hpa = ioc_remap(sba_dev, IKE_IOC_OFFSET(1));
                num_ioc = 2;

                /* TODO - LOOKUP Ike/Stretch chipset mem map */
        }
        /* XXX: What about Reo Grande? */

        sba_dev->num_ioc = num_ioc;
        for (i = 0; i < num_ioc; i++) {
                void __iomem *ioc_hpa = sba_dev->ioc[i].ioc_hpa;
                unsigned int j;

                for (j=0; j < sizeof(u64) * ROPES_PER_IOC; j+=sizeof(u64)) {

                        /*
                         * Clear ROPE(N)_CONFIG AO bit.
                         * Disables "NT Ordering" (~= !"Relaxed Ordering")
                         * Overrides bit 1 in DMA Hint Sets.
                         * Improves netperf UDP_STREAM by ~10% for bcm5701.
                         */
                        if (IS_PLUTO(sba_dev->iodc)) {
                                void __iomem *rope_cfg;
                                unsigned long cfg_val;

                                rope_cfg = ioc_hpa + IOC_ROPE0_CFG + j;
                                cfg_val = READ_REG(rope_cfg);
                                cfg_val &= ~IOC_ROPE_AO;
                                WRITE_REG(cfg_val, rope_cfg);
                        }

                        /*
                        ** Make sure the box crashes on rope errors.
                        */
                        WRITE_REG(HF_ENABLE, ioc_hpa + ROPE0_CTL + j);
                }

                /* flush out the last writes */
                READ_REG(sba_dev->ioc[i].ioc_hpa + ROPE7_CTL);

                DBG_INIT("      ioc[%d] ROPE_CFG 0x%Lx  ROPE_DBG 0x%Lx\n",
                                i,
                                READ_REG(sba_dev->ioc[i].ioc_hpa + 0x40),
                                READ_REG(sba_dev->ioc[i].ioc_hpa + 0x50)
                        );
                DBG_INIT("      STATUS_CONTROL 0x%Lx  FLUSH_CTRL 0x%Lx\n",
                                READ_REG(sba_dev->ioc[i].ioc_hpa + 0x108),
                                READ_REG(sba_dev->ioc[i].ioc_hpa + 0x400)
                        );

                if (IS_PLUTO(sba_dev->iodc)) {
                        sba_ioc_init_pluto(sba_dev->dev, &(sba_dev->ioc[i]), i);
                } else {
                        sba_ioc_init(sba_dev->dev, &(sba_dev->ioc[i]), i);
                }
        }
}

static void
sba_common_init(struct sba_device *sba_dev)
{
        int i;

        /* add this one to the head of the list (order doesn't matter)
        ** This will be useful for debugging - especially if we get coredumps
        */
        sba_dev->next = sba_list;
        sba_list = sba_dev;

        for(i=0; i< sba_dev->num_ioc; i++) {
                int res_size;
#ifdef DEBUG_DMB_TRAP
                extern void iterate_pages(unsigned long , unsigned long ,
                                          void (*)(pte_t * , unsigned long),
                                          unsigned long );
                void set_data_memory_break(pte_t * , unsigned long);
#endif
                /* resource map size dictated by pdir_size */
                res_size = sba_dev->ioc[i].pdir_size/sizeof(u64); /* entries */

                /* Second part of PIRANHA BUG */
                if (piranha_bad_128k) {
                        res_size -= (128*1024)/sizeof(u64);
                }

                res_size >>= 3;  /* convert bit count to byte count */
                DBG_INIT("%s() res_size 0x%x\n",
                        __FUNCTION__, res_size);

                sba_dev->ioc[i].res_size = res_size;
                sba_dev->ioc[i].res_map = (char *) __get_free_pages(GFP_KERNEL, get_order(res_size));

#ifdef DEBUG_DMB_TRAP
                iterate_pages( sba_dev->ioc[i].res_map, res_size,
                                set_data_memory_break, 0);
#endif

                if (NULL == sba_dev->ioc[i].res_map)
                {
                        panic("%s:%s() could not allocate resource map\n",
                              __FILE__, __FUNCTION__ );
                }

                memset(sba_dev->ioc[i].res_map, 0, res_size);
                /* next available IOVP - circular search */
                sba_dev->ioc[i].res_hint = (unsigned long *)
                                &(sba_dev->ioc[i].res_map[L1_CACHE_BYTES]);

#ifdef ASSERT_PDIR_SANITY
                /* Mark first bit busy - ie no IOVA 0 */
                sba_dev->ioc[i].res_map[0] = 0x80;
                sba_dev->ioc[i].pdir_base[0] = 0xeeffc0addbba0080ULL;
#endif

                /* Third (and last) part of PIRANHA BUG */
                if (piranha_bad_128k) {
                        /* region from +1408K to +1536 is un-usable. */

                        int idx_start = (1408*1024/sizeof(u64)) >> 3;
                        int idx_end   = (1536*1024/sizeof(u64)) >> 3;
                        long *p_start = (long *) &(sba_dev->ioc[i].res_map[idx_start]);
                        long *p_end   = (long *) &(sba_dev->ioc[i].res_map[idx_end]);

                        /* mark that part of the io pdir busy */
                        while (p_start < p_end)
                                *p_start++ = -1;
                                
                }

#ifdef DEBUG_DMB_TRAP
                iterate_pages( sba_dev->ioc[i].res_map, res_size,
                                set_data_memory_break, 0);
                iterate_pages( sba_dev->ioc[i].pdir_base, sba_dev->ioc[i].pdir_size,
                                set_data_memory_break, 0);
#endif

                DBG_INIT("%s() %d res_map %x %p\n",
                        __FUNCTION__, i, res_size, sba_dev->ioc[i].res_map);
        }

        spin_lock_init(&sba_dev->sba_lock);
        ioc_needs_fdc = boot_cpu_data.pdc.capabilities & PDC_MODEL_IOPDIR_FDC;

#ifdef DEBUG_SBA_INIT
        /*
         * If the PDC_MODEL capabilities has Non-coherent IO-PDIR bit set
         * (bit #61, big endian), we have to flush and sync every time
         * IO-PDIR is changed in Ike/Astro.
         */
        if (ioc_needs_fdc) {
                printk(KERN_INFO MODULE_NAME " FDC/SYNC required.\n");
        } else {
                printk(KERN_INFO MODULE_NAME " IOC has cache coherent PDIR.\n");
        }
#endif
}

#ifdef CONFIG_PROC_FS
static int sba_proc_info(struct seq_file *m, void *p)
{
        struct sba_device *sba_dev = sba_list;
        struct ioc *ioc = &sba_dev->ioc[0];     /* FIXME: Multi-IOC support! */
        int total_pages = (int) (ioc->res_size << 3); /* 8 bits per byte */
#ifdef SBA_COLLECT_STATS
        unsigned long avg = 0, min, max;
#endif
        int i, len = 0;

        len += seq_printf(m, "%s rev %d.%d\n",
                sba_dev->name,
                (sba_dev->hw_rev & 0x7) + 1,
                (sba_dev->hw_rev & 0x18) >> 3
                );
        len += seq_printf(m, "IO PDIR size    : %d bytes (%d entries)\n",
                (int) ((ioc->res_size << 3) * sizeof(u64)), /* 8 bits/byte */
                total_pages);

        len += seq_printf(m, "Resource bitmap : %d bytes (%d pages)\n", 
                ioc->res_size, ioc->res_size << 3);   /* 8 bits per byte */

        len += seq_printf(m, "LMMIO_BASE/MASK/ROUTE %08x %08x %08x\n",
                READ_REG32(sba_dev->sba_hpa + LMMIO_DIST_BASE),
                READ_REG32(sba_dev->sba_hpa + LMMIO_DIST_MASK),
                READ_REG32(sba_dev->sba_hpa + LMMIO_DIST_ROUTE)
                );

        for (i=0; i<4; i++)
                len += seq_printf(m, "DIR%d_BASE/MASK/ROUTE %08x %08x %08x\n", i,
                        READ_REG32(sba_dev->sba_hpa + LMMIO_DIRECT0_BASE  + i*0x18),
                        READ_REG32(sba_dev->sba_hpa + LMMIO_DIRECT0_MASK  + i*0x18),
                        READ_REG32(sba_dev->sba_hpa + LMMIO_DIRECT0_ROUTE + i*0x18)
                );

#ifdef SBA_COLLECT_STATS
        len += seq_printf(m, "IO PDIR entries : %ld free  %ld used (%d%%)\n",
                total_pages - ioc->used_pages, ioc->used_pages,
                (int) (ioc->used_pages * 100 / total_pages));

        min = max = ioc->avg_search[0];
        for (i = 0; i < SBA_SEARCH_SAMPLE; i++) {
                avg += ioc->avg_search[i];
                if (ioc->avg_search[i] > max) max = ioc->avg_search[i];
                if (ioc->avg_search[i] < min) min = ioc->avg_search[i];
        }
        avg /= SBA_SEARCH_SAMPLE;
        len += seq_printf(m, "  Bitmap search : %ld/%ld/%ld (min/avg/max CPU Cycles)\n",
                min, avg, max);

        len += seq_printf(m, "pci_map_single(): %12ld calls  %12ld pages (avg %d/1000)\n",
                ioc->msingle_calls, ioc->msingle_pages,
                (int) ((ioc->msingle_pages * 1000)/ioc->msingle_calls));

        /* KLUGE - unmap_sg calls unmap_single for each mapped page */
        min = ioc->usingle_calls;
        max = ioc->usingle_pages - ioc->usg_pages;
        len += seq_printf(m, "pci_unmap_single: %12ld calls  %12ld pages (avg %d/1000)\n",
                min, max, (int) ((max * 1000)/min));

        len += seq_printf(m, "pci_map_sg()    : %12ld calls  %12ld pages (avg %d/1000)\n",
                ioc->msg_calls, ioc->msg_pages, 
                (int) ((ioc->msg_pages * 1000)/ioc->msg_calls));

        len += seq_printf(m, "pci_unmap_sg()  : %12ld calls  %12ld pages (avg %d/1000)\n",
                ioc->usg_calls, ioc->usg_pages,
                (int) ((ioc->usg_pages * 1000)/ioc->usg_calls));
#endif

        return 0;
}

static int
sba_proc_open(struct inode *i, struct file *f)
{
        return single_open(f, &sba_proc_info, NULL);
}

static struct file_operations sba_proc_fops = {
        .owner = THIS_MODULE,
        .open = sba_proc_open,
        .read = seq_read,
        .llseek = seq_lseek,
        .release = single_release,
};

static int
sba_proc_bitmap_info(struct seq_file *m, void *p)
{
        struct sba_device *sba_dev = sba_list;
        struct ioc *ioc = &sba_dev->ioc[0];     /* FIXME: Multi-IOC support! */
        unsigned int *res_ptr = (unsigned int *)ioc->res_map;
        int i, len = 0;

        for (i = 0; i < (ioc->res_size/sizeof(unsigned int)); ++i, ++res_ptr) {
                if ((i & 7) == 0)
                        len += seq_printf(m, "\n   ");
                len += seq_printf(m, " %08x", *res_ptr);
        }
        len += seq_printf(m, "\n");

        return 0;
}

static int
sba_proc_bitmap_open(struct inode *i, struct file *f)
{
        return single_open(f, &sba_proc_bitmap_info, NULL);
}

static struct file_operations sba_proc_bitmap_fops = {
        .owner = THIS_MODULE,
        .open = sba_proc_bitmap_open,
        .read = seq_read,
        .llseek = seq_lseek,
        .release = single_release,
};
#endif /* CONFIG_PROC_FS */

static struct parisc_device_id sba_tbl[] = {
        { HPHW_IOA, HVERSION_REV_ANY_ID, ASTRO_RUNWAY_PORT, 0xb },
        { HPHW_BCPORT, HVERSION_REV_ANY_ID, IKE_MERCED_PORT, 0xc },
        { HPHW_BCPORT, HVERSION_REV_ANY_ID, REO_MERCED_PORT, 0xc },
        { HPHW_BCPORT, HVERSION_REV_ANY_ID, REOG_MERCED_PORT, 0xc },
        { HPHW_IOA, HVERSION_REV_ANY_ID, PLUTO_MCKINLEY_PORT, 0xc },
        { 0, }
};

int sba_driver_callback(struct parisc_device *);

static struct parisc_driver sba_driver = {
        .name =         MODULE_NAME,
        .id_table =     sba_tbl,
        .probe =        sba_driver_callback,
};

/*
** Determine if sba should claim this chip (return 0) or not (return 1).
** If so, initialize the chip and tell other partners in crime they
** have work to do.
*/
int
sba_driver_callback(struct parisc_device *dev)
{
        struct sba_device *sba_dev;
        u32 func_class;
        int i;
        char *version;
        void __iomem *sba_addr = ioremap_nocache(dev->hpa.start, SBA_FUNC_SIZE);
        struct proc_dir_entry *info_entry, *bitmap_entry, *root;

        sba_dump_ranges(sba_addr);

        /* Read HW Rev First */
        func_class = READ_REG(sba_addr + SBA_FCLASS);

        if (IS_ASTRO(&dev->id)) {
                unsigned long fclass;
                static char astro_rev[]="Astro ?.?";

                /* Astro is broken...Read HW Rev First */
                fclass = READ_REG(sba_addr);

                astro_rev[6] = '1' + (char) (fclass & 0x7);
                astro_rev[8] = '0' + (char) ((fclass & 0x18) >> 3);
                version = astro_rev;

        } else if (IS_IKE(&dev->id)) {
                static char ike_rev[] = "Ike rev ?";
                ike_rev[8] = '0' + (char) (func_class & 0xff);
                version = ike_rev;
        } else if (IS_PLUTO(&dev->id)) {
                static char pluto_rev[]="Pluto ?.?";
                pluto_rev[6] = '0' + (char) ((func_class & 0xf0) >> 4); 
                pluto_rev[8] = '0' + (char) (func_class & 0x0f); 
                version = pluto_rev;
        } else {
                static char reo_rev[] = "REO rev ?";
                reo_rev[8] = '0' + (char) (func_class & 0xff);
                version = reo_rev;
        }

        if (!global_ioc_cnt) {
                global_ioc_cnt = count_parisc_driver(&sba_driver);

                /* Astro and Pluto have one IOC per SBA */
                if ((!IS_ASTRO(&dev->id)) || (!IS_PLUTO(&dev->id)))
                        global_ioc_cnt *= 2;
        }

        printk(KERN_INFO "%s found %s at 0x%lx\n",
                MODULE_NAME, version, dev->hpa.start);

        sba_dev = kzalloc(sizeof(struct sba_device), GFP_KERNEL);
        if (!sba_dev) {
                printk(KERN_ERR MODULE_NAME " - couldn't alloc sba_device\n");
                return -ENOMEM;
        }

        parisc_set_drvdata(dev, sba_dev);

        for(i=0; i<MAX_IOC; i++)
                spin_lock_init(&(sba_dev->ioc[i].res_lock));

        sba_dev->dev = dev;
        sba_dev->hw_rev = func_class;
        sba_dev->iodc = &dev->id;
        sba_dev->name = dev->name;
        sba_dev->sba_hpa = sba_addr;

        sba_get_pat_resources(sba_dev);
        sba_hw_init(sba_dev);
        sba_common_init(sba_dev);

        hppa_dma_ops = &sba_ops;

#ifdef CONFIG_PROC_FS
        switch (dev->id.hversion) {
        case PLUTO_MCKINLEY_PORT:
                root = proc_mckinley_root;
                break;
        case ASTRO_RUNWAY_PORT:
        case IKE_MERCED_PORT:
        default:
                root = proc_runway_root;
                break;
        }

        info_entry = create_proc_entry("sba_iommu", 0, root);
        bitmap_entry = create_proc_entry("sba_iommu-bitmap", 0, root);

        if (info_entry)
                info_entry->proc_fops = &sba_proc_fops;

        if (bitmap_entry)
                bitmap_entry->proc_fops = &sba_proc_bitmap_fops;
#endif

        parisc_vmerge_boundary = IOVP_SIZE;
        parisc_vmerge_max_size = IOVP_SIZE * BITS_PER_LONG;
        parisc_has_iommu();
        return 0;
}

/*
** One time initialization to let the world know the SBA was found.
** This is the only routine which is NOT static.
** Must be called exactly once before pci_init().
*/
void __init sba_init(void)
{
        register_parisc_driver(&sba_driver);
}


/**
 * sba_get_iommu - Assign the iommu pointer for the pci bus controller.
 * @dev: The parisc device.
 *
 * Returns the appropriate IOMMU data for the given parisc PCI controller.
 * This is cached and used later for PCI DMA Mapping.
 */
void * sba_get_iommu(struct parisc_device *pci_hba)
{
        struct parisc_device *sba_dev = parisc_parent(pci_hba);
        struct sba_device *sba = sba_dev->dev.driver_data;
        char t = sba_dev->id.hw_type;
        int iocnum = (pci_hba->hw_path >> 3);   /* rope # */

        WARN_ON((t != HPHW_IOA) && (t != HPHW_BCPORT));

        return &(sba->ioc[iocnum]);
}


/**
 * sba_directed_lmmio - return first directed LMMIO range routed to rope
 * @pa_dev: The parisc device.
 * @r: resource PCI host controller wants start/end fields assigned.
 *
 * For the given parisc PCI controller, determine if any direct ranges
 * are routed down the corresponding rope.
 */
void sba_directed_lmmio(struct parisc_device *pci_hba, struct resource *r)
{
        struct parisc_device *sba_dev = parisc_parent(pci_hba);
        struct sba_device *sba = sba_dev->dev.driver_data;
        char t = sba_dev->id.hw_type;
        int i;
        int rope = (pci_hba->hw_path & (ROPES_PER_IOC-1));  /* rope # */

        BUG_ON((t!=HPHW_IOA) && (t!=HPHW_BCPORT));

        r->start = r->end = 0;

        /* Astro has 4 directed ranges. Not sure about Ike/Pluto/et al */
        for (i=0; i<4; i++) {
                int base, size;
                void __iomem *reg = sba->sba_hpa + i*0x18;

                base = READ_REG32(reg + LMMIO_DIRECT0_BASE);
                if ((base & 1) == 0)
                        continue;       /* not enabled */

                size = READ_REG32(reg + LMMIO_DIRECT0_ROUTE);

                if ((size & (ROPES_PER_IOC-1)) != rope)
                        continue;       /* directed down different rope */
                
                r->start = (base & ~1UL) | PCI_F_EXTEND;
                size = ~ READ_REG32(reg + LMMIO_DIRECT0_MASK);
                r->end = r->start + size;
        }
}


/**
 * sba_distributed_lmmio - return portion of distributed LMMIO range
 * @pa_dev: The parisc device.
 * @r: resource PCI host controller wants start/end fields assigned.
 *
 * For the given parisc PCI controller, return portion of distributed LMMIO
 * range. The distributed LMMIO is always present and it's just a question
 * of the base address and size of the range.
 */
void sba_distributed_lmmio(struct parisc_device *pci_hba, struct resource *r )
{
        struct parisc_device *sba_dev = parisc_parent(pci_hba);
        struct sba_device *sba = sba_dev->dev.driver_data;
        char t = sba_dev->id.hw_type;
        int base, size;
        int rope = (pci_hba->hw_path & (ROPES_PER_IOC-1));  /* rope # */

        BUG_ON((t!=HPHW_IOA) && (t!=HPHW_BCPORT));

        r->start = r->end = 0;

        base = READ_REG32(sba->sba_hpa + LMMIO_DIST_BASE);
        if ((base & 1) == 0) {
                BUG();  /* Gah! Distr Range wasn't enabled! */
                return;
        }

        r->start = (base & ~1UL) | PCI_F_EXTEND;

        size = (~READ_REG32(sba->sba_hpa + LMMIO_DIST_MASK)) / ROPES_PER_IOC;
        r->start += rope * (size + 1);  /* adjust base for this rope */
        r->end = r->start + size;
}