wl1271: Configure probe-request template when associated
[safe/jmp/linux-2.6] / drivers / net / wireless / wl12xx / wl1271_rx.c
1 /*
2  * This file is part of wl1271
3  *
4  * Copyright (C) 2009 Nokia Corporation
5  *
6  * Contact: Luciano Coelho <luciano.coelho@nokia.com>
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License
10  * version 2 as published by the Free Software Foundation.
11  *
12  * This program is distributed in the hope that it will be useful, but
13  * WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
15  * General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
20  * 02110-1301 USA
21  *
22  */
23
24 #include "wl1271.h"
25 #include "wl1271_acx.h"
26 #include "wl1271_reg.h"
27 #include "wl1271_rx.h"
28 #include "wl1271_io.h"
29
30 static u8 wl1271_rx_get_mem_block(struct wl1271_fw_status *status,
31                                   u32 drv_rx_counter)
32 {
33         return le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]) &
34                 RX_MEM_BLOCK_MASK;
35 }
36
37 static u32 wl1271_rx_get_buf_size(struct wl1271_fw_status *status,
38                                  u32 drv_rx_counter)
39 {
40         return (le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]) &
41                 RX_BUF_SIZE_MASK) >> RX_BUF_SIZE_SHIFT_DIV;
42 }
43
44 static void wl1271_rx_status(struct wl1271 *wl,
45                              struct wl1271_rx_descriptor *desc,
46                              struct ieee80211_rx_status *status,
47                              u8 beacon)
48 {
49         memset(status, 0, sizeof(struct ieee80211_rx_status));
50
51         status->band = wl->band;
52         status->rate_idx = wl1271_rate_to_idx(wl, desc->rate);
53
54         /*
55          * FIXME: Add mactime handling.  For IBSS (ad-hoc) we need to get the
56          * timestamp from the beacon (acx_tsf_info).  In BSS mode (infra) we
57          * only need the mactime for monitor mode.  For now the mactime is
58          * not valid, so RX_FLAG_TSFT should not be set
59          */
60         status->signal = desc->rssi;
61
62         status->freq = ieee80211_channel_to_frequency(desc->channel);
63
64         if (desc->flags & WL1271_RX_DESC_ENCRYPT_MASK) {
65                 status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED;
66
67                 if (likely(!(desc->status & WL1271_RX_DESC_DECRYPT_FAIL)))
68                         status->flag |= RX_FLAG_DECRYPTED;
69                 if (unlikely(desc->status & WL1271_RX_DESC_MIC_FAIL))
70                         status->flag |= RX_FLAG_MMIC_ERROR;
71         }
72 }
73
74 static void wl1271_rx_handle_data(struct wl1271 *wl, u32 length)
75 {
76         struct ieee80211_rx_status rx_status;
77         struct wl1271_rx_descriptor *desc;
78         struct sk_buff *skb;
79         u16 *fc;
80         u8 *buf;
81         u8 beacon = 0;
82
83         /*
84          * In PLT mode we seem to get frames and mac80211 warns about them,
85          * workaround this by not retrieving them at all.
86          */
87         if (unlikely(wl->state == WL1271_STATE_PLT))
88                 return;
89
90         skb = __dev_alloc_skb(length, GFP_KERNEL);
91         if (!skb) {
92                 wl1271_error("Couldn't allocate RX frame");
93                 return;
94         }
95
96         buf = skb_put(skb, length);
97         wl1271_read(wl, WL1271_SLV_MEM_DATA, buf, length, true);
98
99         /* the data read starts with the descriptor */
100         desc = (struct wl1271_rx_descriptor *) buf;
101
102         /* now we pull the descriptor out of the buffer */
103         skb_pull(skb, sizeof(*desc));
104
105         fc = (u16 *)skb->data;
106         if ((*fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_BEACON)
107                 beacon = 1;
108
109         wl1271_rx_status(wl, desc, &rx_status, beacon);
110
111         wl1271_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb, skb->len,
112                      beacon ? "beacon" : "");
113
114         memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
115         ieee80211_rx_ni(wl->hw, skb);
116 }
117
118 void wl1271_rx(struct wl1271 *wl, struct wl1271_fw_status *status)
119 {
120         struct wl1271_acx_mem_map *wl_mem_map = wl->target_mem_map;
121         u32 buf_size;
122         u32 fw_rx_counter  = status->fw_rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
123         u32 drv_rx_counter = wl->rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
124         u32 mem_block;
125
126         while (drv_rx_counter != fw_rx_counter) {
127                 mem_block = wl1271_rx_get_mem_block(status, drv_rx_counter);
128                 buf_size = wl1271_rx_get_buf_size(status, drv_rx_counter);
129
130                 if (buf_size == 0) {
131                         wl1271_warning("received empty data");
132                         break;
133                 }
134
135                 wl->rx_mem_pool_addr.addr = (mem_block << 8) +
136                         le32_to_cpu(wl_mem_map->packet_memory_pool_start);
137                 wl->rx_mem_pool_addr.addr_extra =
138                         wl->rx_mem_pool_addr.addr + 4;
139
140                 /* Choose the block we want to read */
141                 wl1271_write(wl, WL1271_SLV_REG_DATA, &wl->rx_mem_pool_addr,
142                              sizeof(wl->rx_mem_pool_addr), false);
143
144                 wl1271_rx_handle_data(wl, buf_size);
145
146                 wl->rx_counter++;
147                 drv_rx_counter = wl->rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
148         }
149
150         wl1271_write32(wl, RX_DRIVER_COUNTER_ADDRESS, wl->rx_counter);
151 }