SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/net/wireless/rt2x00/rt73usb.c

   1 /*
   2         Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
   3         <http://rt2x00.serialmonkey.com>
   4
   5         This program is free software; you can redistribute it and/or modify
   6         it under the terms of the GNU General Public License as published by
   7         the Free Software Foundation; either version 2 of the License, or
   8         (at your option) any later version.
   9
  10         This program is distributed in the hope that it will be useful,
  11         but WITHOUT ANY WARRANTY; without even the implied warranty of
  12         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  13         GNU General Public License for more details.
  14
  15         You should have received a copy of the GNU General Public License
  16         along with this program; if not, write to the
  17         Free Software Foundation, Inc.,
  18         59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  19  */
  20
  21 /*
  22         Module: rt73usb
  23         Abstract: rt73usb device specific routines.
  24         Supported chipsets: rt2571W & rt2671.
  25  */
  26
  27 #include <linux/delay.h>
  28 #include <linux/etherdevice.h>
  29 #include <linux/init.h>
  30 #include <linux/kernel.h>
  31 #include <linux/module.h>
  32 #include <linux/usb.h>
  33
  34 #include "rt2x00.h"
  35 #include "rt2x00usb.h"
  36 #include "rt73usb.h"
  37
  38 /*
  39  * Register access.
  40  * All access to the CSR registers will go through the methods
  41  * rt73usb_register_read and rt73usb_register_write.
  42  * BBP and RF register require indirect register access,
  43  * and use the CSR registers BBPCSR and RFCSR to achieve this.
  44  * These indirect registers work with busy bits,
  45  * and we will try maximal REGISTER_BUSY_COUNT times to access
  46  * the register while taking a REGISTER_BUSY_DELAY us delay
  47  * between each attampt. When the busy bit is still set at that time,
  48  * the access attempt is considered to have failed,
  49  * and we will print an error.
  50  * The _lock versions must be used if you already hold the usb_cache_mutex
  51  */
  52 static inline void rt73usb_register_read(struct rt2x00_dev *rt2x00dev,
  53                                          const unsigned int offset, u32 *value)
  54 {
  55         __le32 reg;
  56         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
  57                                       USB_VENDOR_REQUEST_IN, offset,
  58                                       &reg, sizeof(u32), REGISTER_TIMEOUT);
  59         *value = le32_to_cpu(reg);
  60 }
  61
  62 static inline void rt73usb_register_read_lock(struct rt2x00_dev *rt2x00dev,
  63                                               const unsigned int offset, u32 *value)
  64 {
  65         __le32 reg;
  66         rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_READ,
  67                                        USB_VENDOR_REQUEST_IN, offset,
  68                                        &reg, sizeof(u32), REGISTER_TIMEOUT);
  69         *value = le32_to_cpu(reg);
  70 }
  71
  72 static inline void rt73usb_register_multiread(struct rt2x00_dev *rt2x00dev,
  73                                               const unsigned int offset,
  74                                               void *value, const u32 length)
  75 {
  76         int timeout = REGISTER_TIMEOUT * (length / sizeof(u32));
  77         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
  78                                       USB_VENDOR_REQUEST_IN, offset,
  79                                       value, length, timeout);
  80 }
  81
  82 static inline void rt73usb_register_write(struct rt2x00_dev *rt2x00dev,
  83                                           const unsigned int offset, u32 value)
  84 {
  85         __le32 reg = cpu_to_le32(value);
  86         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
  87                                       USB_VENDOR_REQUEST_OUT, offset,
  88                                       &reg, sizeof(u32), REGISTER_TIMEOUT);
  89 }
  90
  91 static inline void rt73usb_register_write_lock(struct rt2x00_dev *rt2x00dev,
  92                                                const unsigned int offset, u32 value)
  93 {
  94         __le32 reg = cpu_to_le32(value);
  95         rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_WRITE,
  96                                        USB_VENDOR_REQUEST_OUT, offset,
  97                                       &reg, sizeof(u32), REGISTER_TIMEOUT);
  98 }
  99
 100 static inline void rt73usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
 101                                                const unsigned int offset,
 102                                                void *value, const u32 length)
 103 {
 104         int timeout = REGISTER_TIMEOUT * (length / sizeof(u32));
 105         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
 106                                       USB_VENDOR_REQUEST_OUT, offset,
 107                                       value, length, timeout);
 108 }
 109
 110 static u32 rt73usb_bbp_check(struct rt2x00_dev *rt2x00dev)
 111 {
 112         u32 reg;
 113         unsigned int i;
 114
 115         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 116                 rt73usb_register_read_lock(rt2x00dev, PHY_CSR3, &reg);
 117                 if (!rt2x00_get_field32(reg, PHY_CSR3_BUSY))
 118                         break;
 119                 udelay(REGISTER_BUSY_DELAY);
 120         }
 121
 122         return reg;
 123 }
 124
 125 static void rt73usb_bbp_write(struct rt2x00_dev *rt2x00dev,
 126                               const unsigned int word, const u8 value)
 127 {
 128         u32 reg;
 129
 130         mutex_lock(&rt2x00dev->usb_cache_mutex);
 131
 132         /*
 133          * Wait until the BBP becomes ready.
 134          */
 135         reg = rt73usb_bbp_check(rt2x00dev);
 136         if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
 137                 ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n");
 138                 mutex_unlock(&rt2x00dev->usb_cache_mutex);
 139                 return;
 140         }
 141
 142         /*
 143          * Write the data into the BBP.
 144          */
 145         reg = 0;
 146         rt2x00_set_field32(&reg, PHY_CSR3_VALUE, value);
 147         rt2x00_set_field32(&reg, PHY_CSR3_REGNUM, word);
 148         rt2x00_set_field32(&reg, PHY_CSR3_BUSY, 1);
 149         rt2x00_set_field32(&reg, PHY_CSR3_READ_CONTROL, 0);
 150
 151         rt73usb_register_write_lock(rt2x00dev, PHY_CSR3, reg);
 152         mutex_unlock(&rt2x00dev->usb_cache_mutex);
 153 }
 154
 155 static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev,
 156                              const unsigned int word, u8 *value)
 157 {
 158         u32 reg;
 159
 160         mutex_lock(&rt2x00dev->usb_cache_mutex);
 161
 162         /*
 163          * Wait until the BBP becomes ready.
 164          */
 165         reg = rt73usb_bbp_check(rt2x00dev);
 166         if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
 167                 ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
 168                 mutex_unlock(&rt2x00dev->usb_cache_mutex);
 169                 return;
 170         }
 171
 172         /*
 173          * Write the request into the BBP.
 174          */
 175         reg = 0;
 176         rt2x00_set_field32(&reg, PHY_CSR3_REGNUM, word);
 177         rt2x00_set_field32(&reg, PHY_CSR3_BUSY, 1);
 178         rt2x00_set_field32(&reg, PHY_CSR3_READ_CONTROL, 1);
 179
 180         rt73usb_register_write_lock(rt2x00dev, PHY_CSR3, reg);
 181
 182         /*
 183          * Wait until the BBP becomes ready.
 184          */
 185         reg = rt73usb_bbp_check(rt2x00dev);
 186         if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
 187                 ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
 188                 *value = 0xff;
 189                 return;
 190         }
 191
 192         *value = rt2x00_get_field32(reg, PHY_CSR3_VALUE);
 193         mutex_unlock(&rt2x00dev->usb_cache_mutex);
 194 }
 195
 196 static void rt73usb_rf_write(struct rt2x00_dev *rt2x00dev,
 197                              const unsigned int word, const u32 value)
 198 {
 199         u32 reg;
 200         unsigned int i;
 201
 202         if (!word)
 203                 return;
 204
 205         mutex_lock(&rt2x00dev->usb_cache_mutex);
 206
 207         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 208                 rt73usb_register_read_lock(rt2x00dev, PHY_CSR4, &reg);
 209                 if (!rt2x00_get_field32(reg, PHY_CSR4_BUSY))
 210                         goto rf_write;
 211                 udelay(REGISTER_BUSY_DELAY);
 212         }
 213
 214         mutex_unlock(&rt2x00dev->usb_cache_mutex);
 215         ERROR(rt2x00dev, "PHY_CSR4 register busy. Write failed.\n");
 216         return;
 217
 218 rf_write:
 219         reg = 0;
 220         rt2x00_set_field32(&reg, PHY_CSR4_VALUE, value);
 221
 222         /*
 223          * RF5225 and RF2527 contain 21 bits per RF register value,
 224          * all others contain 20 bits.
 225          */
 226         rt2x00_set_field32(&reg, PHY_CSR4_NUMBER_OF_BITS,
 227                            20 + (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
 228                                  rt2x00_rf(&rt2x00dev->chip, RF2527)));
 229         rt2x00_set_field32(&reg, PHY_CSR4_IF_SELECT, 0);
 230         rt2x00_set_field32(&reg, PHY_CSR4_BUSY, 1);
 231
 232         rt73usb_register_write_lock(rt2x00dev, PHY_CSR4, reg);
 233         rt2x00_rf_write(rt2x00dev, word, value);
 234         mutex_unlock(&rt2x00dev->usb_cache_mutex);
 235 }
 236
 237 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 238 #define CSR_OFFSET(__word)      ( CSR_REG_BASE + ((__word) * sizeof(u32)) )
 239
 240 static void rt73usb_read_csr(struct rt2x00_dev *rt2x00dev,
 241                              const unsigned int word, u32 *data)
 242 {
 243         rt73usb_register_read(rt2x00dev, CSR_OFFSET(word), data);
 244 }
 245
 246 static void rt73usb_write_csr(struct rt2x00_dev *rt2x00dev,
 247                               const unsigned int word, u32 data)
 248 {
 249         rt73usb_register_write(rt2x00dev, CSR_OFFSET(word), data);
 250 }
 251
 252 static const struct rt2x00debug rt73usb_rt2x00debug = {
 253         .owner  = THIS_MODULE,
 254         .csr    = {
 255                 .read           = rt73usb_read_csr,
 256                 .write          = rt73usb_write_csr,
 257                 .word_size      = sizeof(u32),
 258                 .word_count     = CSR_REG_SIZE / sizeof(u32),
 259         },
 260         .eeprom = {
 261                 .read           = rt2x00_eeprom_read,
 262                 .write          = rt2x00_eeprom_write,
 263                 .word_size      = sizeof(u16),
 264                 .word_count     = EEPROM_SIZE / sizeof(u16),
 265         },
 266         .bbp    = {
 267                 .read           = rt73usb_bbp_read,
 268                 .write          = rt73usb_bbp_write,
 269                 .word_size      = sizeof(u8),
 270                 .word_count     = BBP_SIZE / sizeof(u8),
 271         },
 272         .rf     = {
 273                 .read           = rt2x00_rf_read,
 274                 .write          = rt73usb_rf_write,
 275                 .word_size      = sizeof(u32),
 276                 .word_count     = RF_SIZE / sizeof(u32),
 277         },
 278 };
 279 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 280
 281 /*
 282  * Configuration handlers.
 283  */
 284 static void rt73usb_config_mac_addr(struct rt2x00_dev *rt2x00dev, __le32 *mac)
 285 {
 286         u32 tmp;
 287
 288         tmp = le32_to_cpu(mac[1]);
 289         rt2x00_set_field32(&tmp, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff);
 290         mac[1] = cpu_to_le32(tmp);
 291
 292         rt73usb_register_multiwrite(rt2x00dev, MAC_CSR2, mac,
 293                                     (2 * sizeof(__le32)));
 294 }
 295
 296 static void rt73usb_config_bssid(struct rt2x00_dev *rt2x00dev, __le32 *bssid)
 297 {
 298         u32 tmp;
 299
 300         tmp = le32_to_cpu(bssid[1]);
 301         rt2x00_set_field32(&tmp, MAC_CSR5_BSS_ID_MASK, 3);
 302         bssid[1] = cpu_to_le32(tmp);
 303
 304         rt73usb_register_multiwrite(rt2x00dev, MAC_CSR4, bssid,
 305                                     (2 * sizeof(__le32)));
 306 }
 307
 308 static void rt73usb_config_type(struct rt2x00_dev *rt2x00dev, const int type,
 309                                 const int tsf_sync)
 310 {
 311         u32 reg;
 312
 313         /*
 314          * Clear current synchronisation setup.
 315          * For the Beacon base registers we only need to clear
 316          * the first byte since that byte contains the VALID and OWNER
 317          * bits which (when set to 0) will invalidate the entire beacon.
 318          */
 319         rt73usb_register_write(rt2x00dev, TXRX_CSR9, 0);
 320         rt73usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
 321         rt73usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
 322         rt73usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
 323         rt73usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
 324
 325         /*
 326          * Enable synchronisation.
 327          */
 328         rt73usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
 329         rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
 330         rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE,
 331                            (tsf_sync == TSF_SYNC_BEACON));
 332         rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
 333         rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, tsf_sync);
 334         rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg);
 335 }
 336
 337 static void rt73usb_config_preamble(struct rt2x00_dev *rt2x00dev,
 338                                       const int short_preamble,
 339                                       const int ack_timeout,
 340                                       const int ack_consume_time)
 341 {
 342         u32 reg;
 343
 344         /*
 345          * When in atomic context, reschedule and let rt2x00lib
 346          * call this function again.
 347          */
 348         if (in_atomic()) {
 349                 queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->config_work);
 350                 return;
 351         }
 352
 353         rt73usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
 354         rt2x00_set_field32(&reg, TXRX_CSR0_RX_ACK_TIMEOUT, ack_timeout);
 355         rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
 356
 357         rt73usb_register_read(rt2x00dev, TXRX_CSR4, &reg);
 358         rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_PREAMBLE,
 359                            !!short_preamble);
 360         rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg);
 361 }
 362
 363 static void rt73usb_config_phymode(struct rt2x00_dev *rt2x00dev,
 364                                    const int basic_rate_mask)
 365 {
 366         rt73usb_register_write(rt2x00dev, TXRX_CSR5, basic_rate_mask);
 367 }
 368
 369 static void rt73usb_config_channel(struct rt2x00_dev *rt2x00dev,
 370                                    struct rf_channel *rf, const int txpower)
 371 {
 372         u8 r3;
 373         u8 r94;
 374         u8 smart;
 375
 376         rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
 377         rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
 378
 379         smart = !(rt2x00_rf(&rt2x00dev->chip, RF5225) ||
 380                   rt2x00_rf(&rt2x00dev->chip, RF2527));
 381
 382         rt73usb_bbp_read(rt2x00dev, 3, &r3);
 383         rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart);
 384         rt73usb_bbp_write(rt2x00dev, 3, r3);
 385
 386         r94 = 6;
 387         if (txpower > MAX_TXPOWER && txpower <= (MAX_TXPOWER + r94))
 388                 r94 += txpower - MAX_TXPOWER;
 389         else if (txpower < MIN_TXPOWER && txpower >= (MIN_TXPOWER - r94))
 390                 r94 += txpower;
 391         rt73usb_bbp_write(rt2x00dev, 94, r94);
 392
 393         rt73usb_rf_write(rt2x00dev, 1, rf->rf1);
 394         rt73usb_rf_write(rt2x00dev, 2, rf->rf2);
 395         rt73usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
 396         rt73usb_rf_write(rt2x00dev, 4, rf->rf4);
 397
 398         rt73usb_rf_write(rt2x00dev, 1, rf->rf1);
 399         rt73usb_rf_write(rt2x00dev, 2, rf->rf2);
 400         rt73usb_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
 401         rt73usb_rf_write(rt2x00dev, 4, rf->rf4);
 402
 403         rt73usb_rf_write(rt2x00dev, 1, rf->rf1);
 404         rt73usb_rf_write(rt2x00dev, 2, rf->rf2);
 405         rt73usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
 406         rt73usb_rf_write(rt2x00dev, 4, rf->rf4);
 407
 408         udelay(10);
 409 }
 410
 411 static void rt73usb_config_txpower(struct rt2x00_dev *rt2x00dev,
 412                                    const int txpower)
 413 {
 414         struct rf_channel rf;
 415
 416         rt2x00_rf_read(rt2x00dev, 1, &rf.rf1);
 417         rt2x00_rf_read(rt2x00dev, 2, &rf.rf2);
 418         rt2x00_rf_read(rt2x00dev, 3, &rf.rf3);
 419         rt2x00_rf_read(rt2x00dev, 4, &rf.rf4);
 420
 421         rt73usb_config_channel(rt2x00dev, &rf, txpower);
 422 }
 423
 424 static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
 425                                       struct antenna_setup *ant)
 426 {
 427         u8 r3;
 428         u8 r4;
 429         u8 r77;
 430         u8 temp;
 431
 432         rt73usb_bbp_read(rt2x00dev, 3, &r3);
 433         rt73usb_bbp_read(rt2x00dev, 4, &r4);
 434         rt73usb_bbp_read(rt2x00dev, 77, &r77);
 435
 436         rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0);
 437
 438         /*
 439          * Configure the RX antenna.
 440          */
 441         switch (ant->rx) {
 442         case ANTENNA_HW_DIVERSITY:
 443                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
 444                 temp = !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags)
 445                        && (rt2x00dev->curr_hwmode != HWMODE_A);
 446                 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, temp);
 447                 break;
 448         case ANTENNA_A:
 449                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 450                 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
 451                 if (rt2x00dev->curr_hwmode == HWMODE_A)
 452                         rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
 453                 else
 454                         rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
 455                 break;
 456         case ANTENNA_SW_DIVERSITY:
 457                 /*
 458                  * NOTE: We should never come here because rt2x00lib is
 459                  * supposed to catch this and send us the correct antenna
 460                  * explicitely. However we are nog going to bug about this.
 461                  * Instead, just default to antenna B.
 462                  */
 463         case ANTENNA_B:
 464                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 465                 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
 466                 if (rt2x00dev->curr_hwmode == HWMODE_A)
 467                         rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
 468                 else
 469                         rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
 470                 break;
 471         }
 472
 473         rt73usb_bbp_write(rt2x00dev, 77, r77);
 474         rt73usb_bbp_write(rt2x00dev, 3, r3);
 475         rt73usb_bbp_write(rt2x00dev, 4, r4);
 476 }
 477
 478 static void rt73usb_config_antenna_2x(struct rt2x00_dev *rt2x00dev,
 479                                       struct antenna_setup *ant)
 480 {
 481         u8 r3;
 482         u8 r4;
 483         u8 r77;
 484
 485         rt73usb_bbp_read(rt2x00dev, 3, &r3);
 486         rt73usb_bbp_read(rt2x00dev, 4, &r4);
 487         rt73usb_bbp_read(rt2x00dev, 77, &r77);
 488
 489         rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0);
 490         rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
 491                           !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags));
 492
 493         /*
 494          * Configure the RX antenna.
 495          */
 496         switch (ant->rx) {
 497         case ANTENNA_HW_DIVERSITY:
 498                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
 499                 break;
 500         case ANTENNA_A:
 501                 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
 502                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 503                 break;
 504         case ANTENNA_SW_DIVERSITY:
 505                 /*
 506                  * NOTE: We should never come here because rt2x00lib is
 507                  * supposed to catch this and send us the correct antenna
 508                  * explicitely. However we are nog going to bug about this.
 509                  * Instead, just default to antenna B.
 510                  */
 511         case ANTENNA_B:
 512                 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
 513                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 514                 break;
 515         }
 516
 517         rt73usb_bbp_write(rt2x00dev, 77, r77);
 518         rt73usb_bbp_write(rt2x00dev, 3, r3);
 519         rt73usb_bbp_write(rt2x00dev, 4, r4);
 520 }
 521
 522 struct antenna_sel {
 523         u8 word;
 524         /*
 525          * value[0] -> non-LNA
 526          * value[1] -> LNA
 527          */
 528         u8 value[2];
 529 };
 530
 531 static const struct antenna_sel antenna_sel_a[] = {
 532         { 96,  { 0x58, 0x78 } },
 533         { 104, { 0x38, 0x48 } },
 534         { 75,  { 0xfe, 0x80 } },
 535         { 86,  { 0xfe, 0x80 } },
 536         { 88,  { 0xfe, 0x80 } },
 537         { 35,  { 0x60, 0x60 } },
 538         { 97,  { 0x58, 0x58 } },
 539         { 98,  { 0x58, 0x58 } },
 540 };
 541
 542 static const struct antenna_sel antenna_sel_bg[] = {
 543         { 96,  { 0x48, 0x68 } },
 544         { 104, { 0x2c, 0x3c } },
 545         { 75,  { 0xfe, 0x80 } },
 546         { 86,  { 0xfe, 0x80 } },
 547         { 88,  { 0xfe, 0x80 } },
 548         { 35,  { 0x50, 0x50 } },
 549         { 97,  { 0x48, 0x48 } },
 550         { 98,  { 0x48, 0x48 } },
 551 };
 552
 553 static void rt73usb_config_antenna(struct rt2x00_dev *rt2x00dev,
 554                                    struct antenna_setup *ant)
 555 {
 556         const struct antenna_sel *sel;
 557         unsigned int lna;
 558         unsigned int i;
 559         u32 reg;
 560
 561         if (rt2x00dev->curr_hwmode == HWMODE_A) {
 562                 sel = antenna_sel_a;
 563                 lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
 564         } else {
 565                 sel = antenna_sel_bg;
 566                 lna = test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
 567         }
 568
 569         for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++)
 570                 rt73usb_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]);
 571
 572         rt73usb_register_read(rt2x00dev, PHY_CSR0, &reg);
 573
 574         rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_BG,
 575                            (rt2x00dev->curr_hwmode == HWMODE_B ||
 576                             rt2x00dev->curr_hwmode == HWMODE_G));
 577         rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_A,
 578                            (rt2x00dev->curr_hwmode == HWMODE_A));
 579
 580         rt73usb_register_write(rt2x00dev, PHY_CSR0, reg);
 581
 582         if (rt2x00_rf(&rt2x00dev->chip, RF5226) ||
 583             rt2x00_rf(&rt2x00dev->chip, RF5225))
 584                 rt73usb_config_antenna_5x(rt2x00dev, ant);
 585         else if (rt2x00_rf(&rt2x00dev->chip, RF2528) ||
 586                  rt2x00_rf(&rt2x00dev->chip, RF2527))
 587                 rt73usb_config_antenna_2x(rt2x00dev, ant);
 588 }
 589
 590 static void rt73usb_config_duration(struct rt2x00_dev *rt2x00dev,
 591                                     struct rt2x00lib_conf *libconf)
 592 {
 593         u32 reg;
 594
 595         rt73usb_register_read(rt2x00dev, MAC_CSR9, &reg);
 596         rt2x00_set_field32(&reg, MAC_CSR9_SLOT_TIME, libconf->slot_time);
 597         rt73usb_register_write(rt2x00dev, MAC_CSR9, reg);
 598
 599         rt73usb_register_read(rt2x00dev, MAC_CSR8, &reg);
 600         rt2x00_set_field32(&reg, MAC_CSR8_SIFS, libconf->sifs);
 601         rt2x00_set_field32(&reg, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3);
 602         rt2x00_set_field32(&reg, MAC_CSR8_EIFS, libconf->eifs);
 603         rt73usb_register_write(rt2x00dev, MAC_CSR8, reg);
 604
 605         rt73usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
 606         rt2x00_set_field32(&reg, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER);
 607         rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
 608
 609         rt73usb_register_read(rt2x00dev, TXRX_CSR4, &reg);
 610         rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_ENABLE, 1);
 611         rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg);
 612
 613         rt73usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
 614         rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL,
 615                            libconf->conf->beacon_int * 16);
 616         rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg);
 617 }
 618
 619 static void rt73usb_config(struct rt2x00_dev *rt2x00dev,
 620                            const unsigned int flags,
 621                            struct rt2x00lib_conf *libconf)
 622 {
 623         if (flags & CONFIG_UPDATE_PHYMODE)
 624                 rt73usb_config_phymode(rt2x00dev, libconf->basic_rates);
 625         if (flags & CONFIG_UPDATE_CHANNEL)
 626                 rt73usb_config_channel(rt2x00dev, &libconf->rf,
 627                                        libconf->conf->power_level);
 628         if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL))
 629                 rt73usb_config_txpower(rt2x00dev, libconf->conf->power_level);
 630         if (flags & CONFIG_UPDATE_ANTENNA)
 631                 rt73usb_config_antenna(rt2x00dev, &libconf->ant);
 632         if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT))
 633                 rt73usb_config_duration(rt2x00dev, libconf);
 634 }
 635
 636 /*
 637  * LED functions.
 638  */
 639 static void rt73usb_enable_led(struct rt2x00_dev *rt2x00dev)
 640 {
 641         u32 reg;
 642
 643         rt73usb_register_read(rt2x00dev, MAC_CSR14, &reg);
 644         rt2x00_set_field32(&reg, MAC_CSR14_ON_PERIOD, 70);
 645         rt2x00_set_field32(&reg, MAC_CSR14_OFF_PERIOD, 30);
 646         rt73usb_register_write(rt2x00dev, MAC_CSR14, reg);
 647
 648         rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_RADIO_STATUS, 1);
 649         rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_A_STATUS,
 650                            (rt2x00dev->rx_status.phymode == MODE_IEEE80211A));
 651         rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_BG_STATUS,
 652                            (rt2x00dev->rx_status.phymode != MODE_IEEE80211A));
 653
 654         rt2x00usb_vendor_request_sw(rt2x00dev, USB_LED_CONTROL, 0x0000,
 655                                     rt2x00dev->led_reg, REGISTER_TIMEOUT);
 656 }
 657
 658 static void rt73usb_disable_led(struct rt2x00_dev *rt2x00dev)
 659 {
 660         rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_RADIO_STATUS, 0);
 661         rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_BG_STATUS, 0);
 662         rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_A_STATUS, 0);
 663
 664         rt2x00usb_vendor_request_sw(rt2x00dev, USB_LED_CONTROL, 0x0000,
 665                                     rt2x00dev->led_reg, REGISTER_TIMEOUT);
 666 }
 667
 668 static void rt73usb_activity_led(struct rt2x00_dev *rt2x00dev, int rssi)
 669 {
 670         u32 led;
 671
 672         if (rt2x00dev->led_mode != LED_MODE_SIGNAL_STRENGTH)
 673                 return;
 674
 675         /*
 676          * Led handling requires a positive value for the rssi,
 677          * to do that correctly we need to add the correction.
 678          */
 679         rssi += rt2x00dev->rssi_offset;
 680
 681         if (rssi <= 30)
 682                 led = 0;
 683         else if (rssi <= 39)
 684                 led = 1;
 685         else if (rssi <= 49)
 686                 led = 2;
 687         else if (rssi <= 53)
 688                 led = 3;
 689         else if (rssi <= 63)
 690                 led = 4;
 691         else
 692                 led = 5;
 693
 694         rt2x00usb_vendor_request_sw(rt2x00dev, USB_LED_CONTROL, led,
 695                                     rt2x00dev->led_reg, REGISTER_TIMEOUT);
 696 }
 697
 698 /*
 699  * Link tuning
 700  */
 701 static void rt73usb_link_stats(struct rt2x00_dev *rt2x00dev,
 702                                struct link_qual *qual)
 703 {
 704         u32 reg;
 705
 706         /*
 707          * Update FCS error count from register.
 708          */
 709         rt73usb_register_read(rt2x00dev, STA_CSR0, &reg);
 710         qual->rx_failed = rt2x00_get_field32(reg, STA_CSR0_FCS_ERROR);
 711
 712         /*
 713          * Update False CCA count from register.
 714          */
 715         rt73usb_register_read(rt2x00dev, STA_CSR1, &reg);
 716         qual->false_cca = rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR);
 717 }
 718
 719 static void rt73usb_reset_tuner(struct rt2x00_dev *rt2x00dev)
 720 {
 721         rt73usb_bbp_write(rt2x00dev, 17, 0x20);
 722         rt2x00dev->link.vgc_level = 0x20;
 723 }
 724
 725 static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev)
 726 {
 727         int rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
 728         u8 r17;
 729         u8 up_bound;
 730         u8 low_bound;
 731
 732         /*
 733          * Update Led strength
 734          */
 735         rt73usb_activity_led(rt2x00dev, rssi);
 736
 737         rt73usb_bbp_read(rt2x00dev, 17, &r17);
 738
 739         /*
 740          * Determine r17 bounds.
 741          */
 742         if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) {
 743                 low_bound = 0x28;
 744                 up_bound = 0x48;
 745
 746                 if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
 747                         low_bound += 0x10;
 748                         up_bound += 0x10;
 749                 }
 750         } else {
 751                 if (rssi > -82) {
 752                         low_bound = 0x1c;
 753                         up_bound = 0x40;
 754                 } else if (rssi > -84) {
 755                         low_bound = 0x1c;
 756                         up_bound = 0x20;
 757                 } else {
 758                         low_bound = 0x1c;
 759                         up_bound = 0x1c;
 760                 }
 761
 762                 if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
 763                         low_bound += 0x14;
 764                         up_bound += 0x10;
 765                 }
 766         }
 767
 768         /*
 769          * Special big-R17 for very short distance
 770          */
 771         if (rssi > -35) {
 772                 if (r17 != 0x60)
 773                         rt73usb_bbp_write(rt2x00dev, 17, 0x60);
 774                 return;
 775         }
 776
 777         /*
 778          * Special big-R17 for short distance
 779          */
 780         if (rssi >= -58) {
 781                 if (r17 != up_bound)
 782                         rt73usb_bbp_write(rt2x00dev, 17, up_bound);
 783                 return;
 784         }
 785
 786         /*
 787          * Special big-R17 for middle-short distance
 788          */
 789         if (rssi >= -66) {
 790                 low_bound += 0x10;
 791                 if (r17 != low_bound)
 792                         rt73usb_bbp_write(rt2x00dev, 17, low_bound);
 793                 return;
 794         }
 795
 796         /*
 797          * Special mid-R17 for middle distance
 798          */
 799         if (rssi >= -74) {
 800                 if (r17 != (low_bound + 0x10))
 801                         rt73usb_bbp_write(rt2x00dev, 17, low_bound + 0x08);
 802                 return;
 803         }
 804
 805         /*
 806          * Special case: Change up_bound based on the rssi.
 807          * Lower up_bound when rssi is weaker then -74 dBm.
 808          */
 809         up_bound -= 2 * (-74 - rssi);
 810         if (low_bound > up_bound)
 811                 up_bound = low_bound;
 812
 813         if (r17 > up_bound) {
 814                 rt73usb_bbp_write(rt2x00dev, 17, up_bound);
 815                 return;
 816         }
 817
 818         /*
 819          * r17 does not yet exceed upper limit, continue and base
 820          * the r17 tuning on the false CCA count.
 821          */
 822         if (rt2x00dev->link.qual.false_cca > 512 && r17 < up_bound) {
 823                 r17 += 4;
 824                 if (r17 > up_bound)
 825                         r17 = up_bound;
 826                 rt73usb_bbp_write(rt2x00dev, 17, r17);
 827         } else if (rt2x00dev->link.qual.false_cca < 100 && r17 > low_bound) {
 828                 r17 -= 4;
 829                 if (r17 < low_bound)
 830                         r17 = low_bound;
 831                 rt73usb_bbp_write(rt2x00dev, 17, r17);
 832         }
 833 }
 834
 835 /*
 836  * Firmware name function.
 837  */
 838 static char *rt73usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
 839 {
 840         return FIRMWARE_RT2571;
 841 }
 842
 843 /*
 844  * Initialization functions.
 845  */
 846 static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, void *data,
 847                                  const size_t len)
 848 {
 849         unsigned int i;
 850         int status;
 851         u32 reg;
 852         char *ptr = data;
 853         char *cache;
 854         int buflen;
 855         int timeout;
 856
 857         /*
 858          * Wait for stable hardware.
 859          */
 860         for (i = 0; i < 100; i++) {
 861                 rt73usb_register_read(rt2x00dev, MAC_CSR0, &reg);
 862                 if (reg)
 863                         break;
 864                 msleep(1);
 865         }
 866
 867         if (!reg) {
 868                 ERROR(rt2x00dev, "Unstable hardware.\n");
 869                 return -EBUSY;
 870         }
 871
 872         /*
 873          * Write firmware to device.
 874          * We setup a seperate cache for this action,
 875          * since we are going to write larger chunks of data
 876          * then normally used cache size.
 877          */
 878         cache = kmalloc(CSR_CACHE_SIZE_FIRMWARE, GFP_KERNEL);
 879         if (!cache) {
 880                 ERROR(rt2x00dev, "Failed to allocate firmware cache.\n");
 881                 return -ENOMEM;
 882         }
 883
 884         for (i = 0; i < len; i += CSR_CACHE_SIZE_FIRMWARE) {
 885                 buflen = min_t(int, len - i, CSR_CACHE_SIZE_FIRMWARE);
 886                 timeout = REGISTER_TIMEOUT * (buflen / sizeof(u32));
 887
 888                 memcpy(cache, ptr, buflen);
 889
 890                 rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE,
 891                                          USB_VENDOR_REQUEST_OUT,
 892                                          FIRMWARE_IMAGE_BASE + i, 0x0000,
 893                                          cache, buflen, timeout);
 894
 895                 ptr += buflen;
 896         }
 897
 898         kfree(cache);
 899
 900         /*
 901          * Send firmware request to device to load firmware,
 902          * we need to specify a long timeout time.
 903          */
 904         status = rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE,
 905                                              0x0000, USB_MODE_FIRMWARE,
 906                                              REGISTER_TIMEOUT_FIRMWARE);
 907         if (status < 0) {
 908                 ERROR(rt2x00dev, "Failed to write Firmware to device.\n");
 909                 return status;
 910         }
 911
 912         rt73usb_disable_led(rt2x00dev);
 913
 914         return 0;
 915 }
 916
 917 static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev)
 918 {
 919         u32 reg;
 920
 921         rt73usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
 922         rt2x00_set_field32(&reg, TXRX_CSR0_AUTO_TX_SEQ, 1);
 923         rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX, 0);
 924         rt2x00_set_field32(&reg, TXRX_CSR0_TX_WITHOUT_WAITING, 0);
 925         rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
 926
 927         rt73usb_register_read(rt2x00dev, TXRX_CSR1, &reg);
 928         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID0, 47); /* CCK Signal */
 929         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID0_VALID, 1);
 930         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID1, 30); /* Rssi */
 931         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID1_VALID, 1);
 932         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID2, 42); /* OFDM Rate */
 933         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID2_VALID, 1);
 934         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID3, 30); /* Rssi */
 935         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID3_VALID, 1);
 936         rt73usb_register_write(rt2x00dev, TXRX_CSR1, reg);
 937
 938         /*
 939          * CCK TXD BBP registers
 940          */
 941         rt73usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
 942         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID0, 13);
 943         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID0_VALID, 1);
 944         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID1, 12);
 945         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID1_VALID, 1);
 946         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID2, 11);
 947         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID2_VALID, 1);
 948         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID3, 10);
 949         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID3_VALID, 1);
 950         rt73usb_register_write(rt2x00dev, TXRX_CSR2, reg);
 951
 952         /*
 953          * OFDM TXD BBP registers
 954          */
 955         rt73usb_register_read(rt2x00dev, TXRX_CSR3, &reg);
 956         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID0, 7);
 957         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID0_VALID, 1);
 958         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID1, 6);
 959         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID1_VALID, 1);
 960         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID2, 5);
 961         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID2_VALID, 1);
 962         rt73usb_register_write(rt2x00dev, TXRX_CSR3, reg);
 963
 964         rt73usb_register_read(rt2x00dev, TXRX_CSR7, &reg);
 965         rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_6MBS, 59);
 966         rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_9MBS, 53);
 967         rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_12MBS, 49);
 968         rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_18MBS, 46);
 969         rt73usb_register_write(rt2x00dev, TXRX_CSR7, reg);
 970
 971         rt73usb_register_read(rt2x00dev, TXRX_CSR8, &reg);
 972         rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_24MBS, 44);
 973         rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_36MBS, 42);
 974         rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_48MBS, 42);
 975         rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_54MBS, 42);
 976         rt73usb_register_write(rt2x00dev, TXRX_CSR8, reg);
 977
 978         rt73usb_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f);
 979
 980         rt73usb_register_read(rt2x00dev, MAC_CSR6, &reg);
 981         rt2x00_set_field32(&reg, MAC_CSR6_MAX_FRAME_UNIT, 0xfff);
 982         rt73usb_register_write(rt2x00dev, MAC_CSR6, reg);
 983
 984         rt73usb_register_write(rt2x00dev, MAC_CSR10, 0x00000718);
 985
 986         if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
 987                 return -EBUSY;
 988
 989         rt73usb_register_write(rt2x00dev, MAC_CSR13, 0x00007f00);
 990
 991         /*
 992          * Invalidate all Shared Keys (SEC_CSR0),
 993          * and clear the Shared key Cipher algorithms (SEC_CSR1 & SEC_CSR5)
 994          */
 995         rt73usb_register_write(rt2x00dev, SEC_CSR0, 0x00000000);
 996         rt73usb_register_write(rt2x00dev, SEC_CSR1, 0x00000000);
 997         rt73usb_register_write(rt2x00dev, SEC_CSR5, 0x00000000);
 998
 999         reg = 0x000023b0;
1000         if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
1001             rt2x00_rf(&rt2x00dev->chip, RF2527))
1002                 rt2x00_set_field32(&reg, PHY_CSR1_RF_RPI, 1);
1003         rt73usb_register_write(rt2x00dev, PHY_CSR1, reg);
1004
1005         rt73usb_register_write(rt2x00dev, PHY_CSR5, 0x00040a06);
1006         rt73usb_register_write(rt2x00dev, PHY_CSR6, 0x00080606);
1007         rt73usb_register_write(rt2x00dev, PHY_CSR7, 0x00000408);
1008
1009         rt73usb_register_read(rt2x00dev, AC_TXOP_CSR0, &reg);
1010         rt2x00_set_field32(&reg, AC_TXOP_CSR0_AC0_TX_OP, 0);
1011         rt2x00_set_field32(&reg, AC_TXOP_CSR0_AC1_TX_OP, 0);
1012         rt73usb_register_write(rt2x00dev, AC_TXOP_CSR0, reg);
1013
1014         rt73usb_register_read(rt2x00dev, AC_TXOP_CSR1, &reg);
1015         rt2x00_set_field32(&reg, AC_TXOP_CSR1_AC2_TX_OP, 192);
1016         rt2x00_set_field32(&reg, AC_TXOP_CSR1_AC3_TX_OP, 48);
1017         rt73usb_register_write(rt2x00dev, AC_TXOP_CSR1, reg);
1018
1019         rt73usb_register_read(rt2x00dev, MAC_CSR9, &reg);
1020         rt2x00_set_field32(&reg, MAC_CSR9_CW_SELECT, 0);
1021         rt73usb_register_write(rt2x00dev, MAC_CSR9, reg);
1022
1023         /*
1024          * We must clear the error counters.
1025          * These registers are cleared on read,
1026          * so we may pass a useless variable to store the value.
1027          */
1028         rt73usb_register_read(rt2x00dev, STA_CSR0, &reg);
1029         rt73usb_register_read(rt2x00dev, STA_CSR1, &reg);
1030         rt73usb_register_read(rt2x00dev, STA_CSR2, &reg);
1031
1032         /*
1033          * Reset MAC and BBP registers.
1034          */
1035         rt73usb_register_read(rt2x00dev, MAC_CSR1, &reg);
1036         rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 1);
1037         rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 1);
1038         rt73usb_register_write(rt2x00dev, MAC_CSR1, reg);
1039
1040         rt73usb_register_read(rt2x00dev, MAC_CSR1, &reg);
1041         rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 0);
1042         rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 0);
1043         rt73usb_register_write(rt2x00dev, MAC_CSR1, reg);
1044
1045         rt73usb_register_read(rt2x00dev, MAC_CSR1, &reg);
1046         rt2x00_set_field32(&reg, MAC_CSR1_HOST_READY, 1);
1047         rt73usb_register_write(rt2x00dev, MAC_CSR1, reg);
1048
1049         return 0;
1050 }
1051
1052 static int rt73usb_init_bbp(struct rt2x00_dev *rt2x00dev)
1053 {
1054         unsigned int i;
1055         u16 eeprom;
1056         u8 reg_id;
1057         u8 value;
1058
1059         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1060                 rt73usb_bbp_read(rt2x00dev, 0, &value);
1061                 if ((value != 0xff) && (value != 0x00))
1062                         goto continue_csr_init;
1063                 NOTICE(rt2x00dev, "Waiting for BBP register.\n");
1064                 udelay(REGISTER_BUSY_DELAY);
1065         }
1066
1067         ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
1068         return -EACCES;
1069
1070 continue_csr_init:
1071         rt73usb_bbp_write(rt2x00dev, 3, 0x80);
1072         rt73usb_bbp_write(rt2x00dev, 15, 0x30);
1073         rt73usb_bbp_write(rt2x00dev, 21, 0xc8);
1074         rt73usb_bbp_write(rt2x00dev, 22, 0x38);
1075         rt73usb_bbp_write(rt2x00dev, 23, 0x06);
1076         rt73usb_bbp_write(rt2x00dev, 24, 0xfe);
1077         rt73usb_bbp_write(rt2x00dev, 25, 0x0a);
1078         rt73usb_bbp_write(rt2x00dev, 26, 0x0d);
1079         rt73usb_bbp_write(rt2x00dev, 32, 0x0b);
1080         rt73usb_bbp_write(rt2x00dev, 34, 0x12);
1081         rt73usb_bbp_write(rt2x00dev, 37, 0x07);
1082         rt73usb_bbp_write(rt2x00dev, 39, 0xf8);
1083         rt73usb_bbp_write(rt2x00dev, 41, 0x60);
1084         rt73usb_bbp_write(rt2x00dev, 53, 0x10);
1085         rt73usb_bbp_write(rt2x00dev, 54, 0x18);
1086         rt73usb_bbp_write(rt2x00dev, 60, 0x10);
1087         rt73usb_bbp_write(rt2x00dev, 61, 0x04);
1088         rt73usb_bbp_write(rt2x00dev, 62, 0x04);
1089         rt73usb_bbp_write(rt2x00dev, 75, 0xfe);
1090         rt73usb_bbp_write(rt2x00dev, 86, 0xfe);
1091         rt73usb_bbp_write(rt2x00dev, 88, 0xfe);
1092         rt73usb_bbp_write(rt2x00dev, 90, 0x0f);
1093         rt73usb_bbp_write(rt2x00dev, 99, 0x00);
1094         rt73usb_bbp_write(rt2x00dev, 102, 0x16);
1095         rt73usb_bbp_write(rt2x00dev, 107, 0x04);
1096
1097         DEBUG(rt2x00dev, "Start initialization from EEPROM...\n");
1098         for (i = 0; i < EEPROM_BBP_SIZE; i++) {
1099                 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
1100
1101                 if (eeprom != 0xffff && eeprom != 0x0000) {
1102                         reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
1103                         value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
1104                         DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n",
1105                               reg_id, value);
1106                         rt73usb_bbp_write(rt2x00dev, reg_id, value);
1107                 }
1108         }
1109         DEBUG(rt2x00dev, "...End initialization from EEPROM.\n");
1110
1111         return 0;
1112 }
1113
1114 /*
1115  * Device state switch handlers.
1116  */
1117 static void rt73usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
1118                               enum dev_state state)
1119 {
1120         u32 reg;
1121
1122         rt73usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
1123         rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX,
1124                            state == STATE_RADIO_RX_OFF);
1125         rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
1126 }
1127
1128 static int rt73usb_enable_radio(struct rt2x00_dev *rt2x00dev)
1129 {
1130         /*
1131          * Initialize all registers.
1132          */
1133         if (rt73usb_init_registers(rt2x00dev) ||
1134             rt73usb_init_bbp(rt2x00dev)) {
1135                 ERROR(rt2x00dev, "Register initialization failed.\n");
1136                 return -EIO;
1137         }
1138
1139         rt2x00usb_enable_radio(rt2x00dev);
1140
1141         /*
1142          * Enable LED
1143          */
1144         rt73usb_enable_led(rt2x00dev);
1145
1146         return 0;
1147 }
1148
1149 static void rt73usb_disable_radio(struct rt2x00_dev *rt2x00dev)
1150 {
1151         /*
1152          * Disable LED
1153          */
1154         rt73usb_disable_led(rt2x00dev);
1155
1156         rt73usb_register_write(rt2x00dev, MAC_CSR10, 0x00001818);
1157
1158         /*
1159          * Disable synchronisation.
1160          */
1161         rt73usb_register_write(rt2x00dev, TXRX_CSR9, 0);
1162
1163         rt2x00usb_disable_radio(rt2x00dev);
1164 }
1165
1166 static int rt73usb_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state)
1167 {
1168         u32 reg;
1169         unsigned int i;
1170         char put_to_sleep;
1171         char current_state;
1172
1173         put_to_sleep = (state != STATE_AWAKE);
1174
1175         rt73usb_register_read(rt2x00dev, MAC_CSR12, &reg);
1176         rt2x00_set_field32(&reg, MAC_CSR12_FORCE_WAKEUP, !put_to_sleep);
1177         rt2x00_set_field32(&reg, MAC_CSR12_PUT_TO_SLEEP, put_to_sleep);
1178         rt73usb_register_write(rt2x00dev, MAC_CSR12, reg);
1179
1180         /*
1181          * Device is not guaranteed to be in the requested state yet.
1182          * We must wait until the register indicates that the
1183          * device has entered the correct state.
1184          */
1185         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1186                 rt73usb_register_read(rt2x00dev, MAC_CSR12, &reg);
1187                 current_state =
1188                     rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE);
1189                 if (current_state == !put_to_sleep)
1190                         return 0;
1191                 msleep(10);
1192         }
1193
1194         NOTICE(rt2x00dev, "Device failed to enter state %d, "
1195                "current device state %d.\n", !put_to_sleep, current_state);
1196
1197         return -EBUSY;
1198 }
1199
1200 static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev,
1201                                     enum dev_state state)
1202 {
1203         int retval = 0;
1204
1205         switch (state) {
1206         case STATE_RADIO_ON:
1207                 retval = rt73usb_enable_radio(rt2x00dev);
1208                 break;
1209         case STATE_RADIO_OFF:
1210                 rt73usb_disable_radio(rt2x00dev);
1211                 break;
1212         case STATE_RADIO_RX_ON:
1213         case STATE_RADIO_RX_OFF:
1214                 rt73usb_toggle_rx(rt2x00dev, state);
1215                 break;
1216         case STATE_DEEP_SLEEP:
1217         case STATE_SLEEP:
1218         case STATE_STANDBY:
1219         case STATE_AWAKE:
1220                 retval = rt73usb_set_state(rt2x00dev, state);
1221                 break;
1222         default:
1223                 retval = -ENOTSUPP;
1224                 break;
1225         }
1226
1227         return retval;
1228 }
1229
1230 /*
1231  * TX descriptor initialization
1232  */
1233 static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
1234                                     struct sk_buff *skb,
1235                                     struct txdata_entry_desc *desc,
1236                                     struct ieee80211_tx_control *control)
1237 {
1238         struct skb_desc *skbdesc = get_skb_desc(skb);
1239         __le32 *txd = skbdesc->desc;
1240         u32 word;
1241
1242         /*
1243          * Start writing the descriptor words.
1244          */
1245         rt2x00_desc_read(txd, 1, &word);
1246         rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, desc->queue);
1247         rt2x00_set_field32(&word, TXD_W1_AIFSN, desc->aifs);
1248         rt2x00_set_field32(&word, TXD_W1_CWMIN, desc->cw_min);
1249         rt2x00_set_field32(&word, TXD_W1_CWMAX, desc->cw_max);
1250         rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
1251         rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1);
1252         rt2x00_desc_write(txd, 1, word);
1253
1254         rt2x00_desc_read(txd, 2, &word);
1255         rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, desc->signal);
1256         rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, desc->service);
1257         rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, desc->length_low);
1258         rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, desc->length_high);
1259         rt2x00_desc_write(txd, 2, word);
1260
1261         rt2x00_desc_read(txd, 5, &word);
1262         rt2x00_set_field32(&word, TXD_W5_TX_POWER,
1263                            TXPOWER_TO_DEV(control->power_level));
1264         rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1);
1265         rt2x00_desc_write(txd, 5, word);
1266
1267         rt2x00_desc_read(txd, 0, &word);
1268         rt2x00_set_field32(&word, TXD_W0_BURST,
1269                            test_bit(ENTRY_TXD_BURST, &desc->flags));
1270         rt2x00_set_field32(&word, TXD_W0_VALID, 1);
1271         rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
1272                            test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags));
1273         rt2x00_set_field32(&word, TXD_W0_ACK,
1274                            test_bit(ENTRY_TXD_ACK, &desc->flags));
1275         rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
1276                            test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags));
1277         rt2x00_set_field32(&word, TXD_W0_OFDM,
1278                            test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags));
1279         rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs);
1280         rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
1281                            !!(control->flags &
1282                               IEEE80211_TXCTL_LONG_RETRY_LIMIT));
1283         rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0);
1284         rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skbdesc->data_len);
1285         rt2x00_set_field32(&word, TXD_W0_BURST2,
1286                            test_bit(ENTRY_TXD_BURST, &desc->flags));
1287         rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
1288         rt2x00_desc_write(txd, 0, word);
1289 }
1290
1291 static int rt73usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev,
1292                                    struct sk_buff *skb)
1293 {
1294         int length;
1295
1296         /*
1297          * The length _must_ be a multiple of 4,
1298          * but it must _not_ be a multiple of the USB packet size.
1299          */
1300         length = roundup(skb->len, 4);
1301         length += (4 * !(length % rt2x00dev->usb_maxpacket));
1302
1303         return length;
1304 }
1305
1306 /*
1307  * TX data initialization
1308  */
1309 static void rt73usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
1310                                   unsigned int queue)
1311 {
1312         u32 reg;
1313
1314         if (queue != IEEE80211_TX_QUEUE_BEACON)
1315                 return;
1316
1317         /*
1318          * For Wi-Fi faily generated beacons between participating stations.
1319          * Set TBTT phase adaptive adjustment step to 8us (default 16us)
1320          */
1321         rt73usb_register_write(rt2x00dev, TXRX_CSR10, 0x00001008);
1322
1323         rt73usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
1324         if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) {
1325                 rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 1);
1326                 rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg);
1327         }
1328 }
1329
1330 /*
1331  * RX control handlers
1332  */
1333 static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
1334 {
1335         u16 eeprom;
1336         u8 offset;
1337         u8 lna;
1338
1339         lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA);
1340         switch (lna) {
1341         case 3:
1342                 offset = 90;
1343                 break;
1344         case 2:
1345                 offset = 74;
1346                 break;
1347         case 1:
1348                 offset = 64;
1349                 break;
1350         default:
1351                 return 0;
1352         }
1353
1354         if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) {
1355                 if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
1356                         if (lna == 3 || lna == 2)
1357                                 offset += 10;
1358                 } else {
1359                         if (lna == 3)
1360                                 offset += 6;
1361                         else if (lna == 2)
1362                                 offset += 8;
1363                 }
1364
1365                 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
1366                 offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
1367         } else {
1368                 if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
1369                         offset += 14;
1370
1371                 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
1372                 offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
1373         }
1374
1375         return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset;
1376 }
1377
1378 static void rt73usb_fill_rxdone(struct data_entry *entry,
1379                                 struct rxdata_entry_desc *desc)
1380 {
1381         __le32 *rxd = (__le32 *)entry->skb->data;
1382         u32 word0;
1383         u32 word1;
1384
1385         rt2x00_desc_read(rxd, 0, &word0);
1386         rt2x00_desc_read(rxd, 1, &word1);
1387
1388         desc->flags = 0;
1389         if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
1390                 desc->flags |= RX_FLAG_FAILED_FCS_CRC;
1391
1392         /*
1393          * Obtain the status about this packet.
1394          */
1395         desc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
1396         desc->rssi = rt73usb_agc_to_rssi(entry->ring->rt2x00dev, word1);
1397         desc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
1398         desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
1399
1400         /*
1401          * Pull the skb to clear the descriptor area.
1402          */
1403         skb_pull(entry->skb, entry->ring->desc_size);
1404
1405         return;
1406 }
1407
1408 /*
1409  * Device probe functions.
1410  */
1411 static int rt73usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
1412 {
1413         u16 word;
1414         u8 *mac;
1415         s8 value;
1416
1417         rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE);
1418
1419         /*
1420          * Start validation of the data that has been read.
1421          */
1422         mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
1423         if (!is_valid_ether_addr(mac)) {
1424                 DECLARE_MAC_BUF(macbuf);
1425
1426                 random_ether_addr(mac);
1427                 EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac));
1428         }
1429
1430         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
1431         if (word == 0xffff) {
1432                 rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
1433                 rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT,
1434                                    ANTENNA_B);
1435                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT,
1436                                    ANTENNA_B);
1437                 rt2x00_set_field16(&word, EEPROM_ANTENNA_FRAME_TYPE, 0);
1438                 rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
1439                 rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
1440                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF5226);
1441                 rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
1442                 EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
1443         }
1444
1445         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
1446         if (word == 0xffff) {
1447                 rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA, 0);
1448                 rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
1449                 EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
1450         }
1451
1452         rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &word);
1453         if (word == 0xffff) {
1454                 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_RDY_G, 0);
1455                 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_RDY_A, 0);
1456                 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_ACT, 0);
1457                 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_0, 0);
1458                 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_1, 0);
1459                 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_2, 0);
1460                 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_3, 0);
1461                 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_4, 0);
1462                 rt2x00_set_field16(&word, EEPROM_LED_LED_MODE,
1463                                    LED_MODE_DEFAULT);
1464                 rt2x00_eeprom_write(rt2x00dev, EEPROM_LED, word);
1465                 EEPROM(rt2x00dev, "Led: 0x%04x\n", word);
1466         }
1467
1468         rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word);
1469         if (word == 0xffff) {
1470                 rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
1471                 rt2x00_set_field16(&word, EEPROM_FREQ_SEQ, 0);
1472                 rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
1473                 EEPROM(rt2x00dev, "Freq: 0x%04x\n", word);
1474         }
1475
1476         rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &word);
1477         if (word == 0xffff) {
1478                 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0);
1479                 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0);
1480                 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word);
1481                 EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word);
1482         } else {
1483                 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_1);
1484                 if (value < -10 || value > 10)
1485                         rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0);
1486                 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_2);
1487                 if (value < -10 || value > 10)
1488                         rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0);
1489                 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word);
1490         }
1491
1492         rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &word);
1493         if (word == 0xffff) {
1494                 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
1495                 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
1496                 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
1497                 EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word);
1498         } else {
1499                 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1);
1500                 if (value < -10 || value > 10)
1501                         rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
1502                 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_2);
1503                 if (value < -10 || value > 10)
1504                         rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
1505                 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
1506         }
1507
1508         return 0;
1509 }
1510
1511 static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
1512 {
1513         u32 reg;
1514         u16 value;
1515         u16 eeprom;
1516
1517         /*
1518          * Read EEPROM word for configuration.
1519          */
1520         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
1521
1522         /*
1523          * Identify RF chipset.
1524          */
1525         value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
1526         rt73usb_register_read(rt2x00dev, MAC_CSR0, &reg);
1527         rt2x00_set_chip(rt2x00dev, RT2571, value, reg);
1528
1529         if (!rt2x00_check_rev(&rt2x00dev->chip, 0x25730)) {
1530                 ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
1531                 return -ENODEV;
1532         }
1533
1534         if (!rt2x00_rf(&rt2x00dev->chip, RF5226) &&
1535             !rt2x00_rf(&rt2x00dev->chip, RF2528) &&
1536             !rt2x00_rf(&rt2x00dev->chip, RF5225) &&
1537             !rt2x00_rf(&rt2x00dev->chip, RF2527)) {
1538                 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
1539                 return -ENODEV;
1540         }
1541
1542         /*
1543          * Identify default antenna configuration.
1544          */
1545         rt2x00dev->default_ant.tx =
1546             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
1547         rt2x00dev->default_ant.rx =
1548             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
1549
1550         /*
1551          * Read the Frame type.
1552          */
1553         if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_FRAME_TYPE))
1554                 __set_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags);
1555
1556         /*
1557          * Read frequency offset.
1558          */
1559         rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
1560         rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
1561
1562         /*
1563          * Read external LNA informations.
1564          */
1565         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
1566
1567         if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA)) {
1568                 __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
1569                 __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
1570         }
1571
1572         /*
1573          * Store led settings, for correct led behaviour.
1574          */
1575         rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom);
1576
1577         rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LED_MODE,
1578                            rt2x00dev->led_mode);
1579         rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_0,
1580                            rt2x00_get_field16(eeprom,
1581                                               EEPROM_LED_POLARITY_GPIO_0));
1582         rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_1,
1583                            rt2x00_get_field16(eeprom,
1584                                               EEPROM_LED_POLARITY_GPIO_1));
1585         rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_2,
1586                            rt2x00_get_field16(eeprom,
1587                                               EEPROM_LED_POLARITY_GPIO_2));
1588         rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_3,
1589                            rt2x00_get_field16(eeprom,
1590                                               EEPROM_LED_POLARITY_GPIO_3));
1591         rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_4,
1592                            rt2x00_get_field16(eeprom,
1593                                               EEPROM_LED_POLARITY_GPIO_4));
1594         rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_ACT,
1595                            rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT));
1596         rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_BG,
1597                            rt2x00_get_field16(eeprom,
1598                                               EEPROM_LED_POLARITY_RDY_G));
1599         rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_A,
1600                            rt2x00_get_field16(eeprom,
1601                                               EEPROM_LED_POLARITY_RDY_A));
1602
1603         return 0;
1604 }
1605
1606 /*
1607  * RF value list for RF2528
1608  * Supports: 2.4 GHz
1609  */
1610 static const struct rf_channel rf_vals_bg_2528[] = {
1611         { 1,  0x00002c0c, 0x00000786, 0x00068255, 0x000fea0b },
1612         { 2,  0x00002c0c, 0x00000786, 0x00068255, 0x000fea1f },
1613         { 3,  0x00002c0c, 0x0000078a, 0x00068255, 0x000fea0b },
1614         { 4,  0x00002c0c, 0x0000078a, 0x00068255, 0x000fea1f },
1615         { 5,  0x00002c0c, 0x0000078e, 0x00068255, 0x000fea0b },
1616         { 6,  0x00002c0c, 0x0000078e, 0x00068255, 0x000fea1f },
1617         { 7,  0x00002c0c, 0x00000792, 0x00068255, 0x000fea0b },
1618         { 8,  0x00002c0c, 0x00000792, 0x00068255, 0x000fea1f },
1619         { 9,  0x00002c0c, 0x00000796, 0x00068255, 0x000fea0b },
1620         { 10, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea1f },
1621         { 11, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea0b },
1622         { 12, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea1f },
1623         { 13, 0x00002c0c, 0x0000079e, 0x00068255, 0x000fea0b },
1624         { 14, 0x00002c0c, 0x000007a2, 0x00068255, 0x000fea13 },
1625 };
1626
1627 /*
1628  * RF value list for RF5226
1629  * Supports: 2.4 GHz & 5.2 GHz
1630  */
1631 static const struct rf_channel rf_vals_5226[] = {
1632         { 1,  0x00002c0c, 0x00000786, 0x00068255, 0x000fea0b },
1633         { 2,  0x00002c0c, 0x00000786, 0x00068255, 0x000fea1f },
1634         { 3,  0x00002c0c, 0x0000078a, 0x00068255, 0x000fea0b },
1635         { 4,  0x00002c0c, 0x0000078a, 0x00068255, 0x000fea1f },
1636         { 5,  0x00002c0c, 0x0000078e, 0x00068255, 0x000fea0b },
1637         { 6,  0x00002c0c, 0x0000078e, 0x00068255, 0x000fea1f },
1638         { 7,  0x00002c0c, 0x00000792, 0x00068255, 0x000fea0b },
1639         { 8,  0x00002c0c, 0x00000792, 0x00068255, 0x000fea1f },
1640         { 9,  0x00002c0c, 0x00000796, 0x00068255, 0x000fea0b },
1641         { 10, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea1f },
1642         { 11, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea0b },
1643         { 12, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea1f },
1644         { 13, 0x00002c0c, 0x0000079e, 0x00068255, 0x000fea0b },
1645         { 14, 0x00002c0c, 0x000007a2, 0x00068255, 0x000fea13 },
1646
1647         /* 802.11 UNI / HyperLan 2 */
1648         { 36, 0x00002c0c, 0x0000099a, 0x00098255, 0x000fea23 },
1649         { 40, 0x00002c0c, 0x000009a2, 0x00098255, 0x000fea03 },
1650         { 44, 0x00002c0c, 0x000009a6, 0x00098255, 0x000fea0b },
1651         { 48, 0x00002c0c, 0x000009aa, 0x00098255, 0x000fea13 },
1652         { 52, 0x00002c0c, 0x000009ae, 0x00098255, 0x000fea1b },
1653         { 56, 0x00002c0c, 0x000009b2, 0x00098255, 0x000fea23 },
1654         { 60, 0x00002c0c, 0x000009ba, 0x00098255, 0x000fea03 },
1655         { 64, 0x00002c0c, 0x000009be, 0x00098255, 0x000fea0b },
1656
1657         /* 802.11 HyperLan 2 */
1658         { 100, 0x00002c0c, 0x00000a2a, 0x000b8255, 0x000fea03 },
1659         { 104, 0x00002c0c, 0x00000a2e, 0x000b8255, 0x000fea0b },
1660         { 108, 0x00002c0c, 0x00000a32, 0x000b8255, 0x000fea13 },
1661         { 112, 0x00002c0c, 0x00000a36, 0x000b8255, 0x000fea1b },
1662         { 116, 0x00002c0c, 0x00000a3a, 0x000b8255, 0x000fea23 },
1663         { 120, 0x00002c0c, 0x00000a82, 0x000b8255, 0x000fea03 },
1664         { 124, 0x00002c0c, 0x00000a86, 0x000b8255, 0x000fea0b },
1665         { 128, 0x00002c0c, 0x00000a8a, 0x000b8255, 0x000fea13 },
1666         { 132, 0x00002c0c, 0x00000a8e, 0x000b8255, 0x000fea1b },
1667         { 136, 0x00002c0c, 0x00000a92, 0x000b8255, 0x000fea23 },
1668
1669         /* 802.11 UNII */
1670         { 140, 0x00002c0c, 0x00000a9a, 0x000b8255, 0x000fea03 },
1671         { 149, 0x00002c0c, 0x00000aa2, 0x000b8255, 0x000fea1f },
1672         { 153, 0x00002c0c, 0x00000aa6, 0x000b8255, 0x000fea27 },
1673         { 157, 0x00002c0c, 0x00000aae, 0x000b8255, 0x000fea07 },
1674         { 161, 0x00002c0c, 0x00000ab2, 0x000b8255, 0x000fea0f },
1675         { 165, 0x00002c0c, 0x00000ab6, 0x000b8255, 0x000fea17 },
1676
1677         /* MMAC(Japan)J52 ch 34,38,42,46 */
1678         { 34, 0x00002c0c, 0x0008099a, 0x000da255, 0x000d3a0b },
1679         { 38, 0x00002c0c, 0x0008099e, 0x000da255, 0x000d3a13 },
1680         { 42, 0x00002c0c, 0x000809a2, 0x000da255, 0x000d3a1b },
1681         { 46, 0x00002c0c, 0x000809a6, 0x000da255, 0x000d3a23 },
1682 };
1683
1684 /*
1685  * RF value list for RF5225 & RF2527
1686  * Supports: 2.4 GHz & 5.2 GHz
1687  */
1688 static const struct rf_channel rf_vals_5225_2527[] = {
1689         { 1,  0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b },
1690         { 2,  0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f },
1691         { 3,  0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b },
1692         { 4,  0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f },
1693         { 5,  0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b },
1694         { 6,  0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f },
1695         { 7,  0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b },
1696         { 8,  0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f },
1697         { 9,  0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b },
1698         { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f },
1699         { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b },
1700         { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f },
1701         { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b },
1702         { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 },
1703
1704         /* 802.11 UNI / HyperLan 2 */
1705         { 36, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa23 },
1706         { 40, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa03 },
1707         { 44, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa0b },
1708         { 48, 0x00002ccc, 0x000049aa, 0x0009be55, 0x000ffa13 },
1709         { 52, 0x00002ccc, 0x000049ae, 0x0009ae55, 0x000ffa1b },
1710         { 56, 0x00002ccc, 0x000049b2, 0x0009ae55, 0x000ffa23 },
1711         { 60, 0x00002ccc, 0x000049ba, 0x0009ae55, 0x000ffa03 },
1712         { 64, 0x00002ccc, 0x000049be, 0x0009ae55, 0x000ffa0b },
1713
1714         /* 802.11 HyperLan 2 */
1715         { 100, 0x00002ccc, 0x00004a2a, 0x000bae55, 0x000ffa03 },
1716         { 104, 0x00002ccc, 0x00004a2e, 0x000bae55, 0x000ffa0b },
1717         { 108, 0x00002ccc, 0x00004a32, 0x000bae55, 0x000ffa13 },
1718         { 112, 0x00002ccc, 0x00004a36, 0x000bae55, 0x000ffa1b },
1719         { 116, 0x00002ccc, 0x00004a3a, 0x000bbe55, 0x000ffa23 },
1720         { 120, 0x00002ccc, 0x00004a82, 0x000bbe55, 0x000ffa03 },
1721         { 124, 0x00002ccc, 0x00004a86, 0x000bbe55, 0x000ffa0b },
1722         { 128, 0x00002ccc, 0x00004a8a, 0x000bbe55, 0x000ffa13 },
1723         { 132, 0x00002ccc, 0x00004a8e, 0x000bbe55, 0x000ffa1b },
1724         { 136, 0x00002ccc, 0x00004a92, 0x000bbe55, 0x000ffa23 },
1725
1726         /* 802.11 UNII */
1727         { 140, 0x00002ccc, 0x00004a9a, 0x000bbe55, 0x000ffa03 },
1728         { 149, 0x00002ccc, 0x00004aa2, 0x000bbe55, 0x000ffa1f },
1729         { 153, 0x00002ccc, 0x00004aa6, 0x000bbe55, 0x000ffa27 },
1730         { 157, 0x00002ccc, 0x00004aae, 0x000bbe55, 0x000ffa07 },
1731         { 161, 0x00002ccc, 0x00004ab2, 0x000bbe55, 0x000ffa0f },
1732         { 165, 0x00002ccc, 0x00004ab6, 0x000bbe55, 0x000ffa17 },
1733
1734         /* MMAC(Japan)J52 ch 34,38,42,46 */
1735         { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa0b },
1736         { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000ffa13 },
1737         { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa1b },
1738         { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa23 },
1739 };
1740
1741
1742 static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
1743 {
1744         struct hw_mode_spec *spec = &rt2x00dev->spec;
1745         u8 *txpower;
1746         unsigned int i;
1747
1748         /*
1749          * Initialize all hw fields.
1750          */
1751         rt2x00dev->hw->flags =
1752             IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
1753             IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
1754         rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
1755         rt2x00dev->hw->max_signal = MAX_SIGNAL;
1756         rt2x00dev->hw->max_rssi = MAX_RX_SSI;
1757         rt2x00dev->hw->queues = 5;
1758
1759         SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev);
1760         SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
1761                                 rt2x00_eeprom_addr(rt2x00dev,
1762                                                    EEPROM_MAC_ADDR_0));
1763
1764         /*
1765          * Convert tx_power array in eeprom.
1766          */
1767         txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
1768         for (i = 0; i < 14; i++)
1769                 txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
1770
1771         /*
1772          * Initialize hw_mode information.
1773          */
1774         spec->num_modes = 2;
1775         spec->num_rates = 12;
1776         spec->tx_power_a = NULL;
1777         spec->tx_power_bg = txpower;
1778         spec->tx_power_default = DEFAULT_TXPOWER;
1779
1780         if (rt2x00_rf(&rt2x00dev->chip, RF2528)) {
1781                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2528);
1782                 spec->channels = rf_vals_bg_2528;
1783         } else if (rt2x00_rf(&rt2x00dev->chip, RF5226)) {
1784                 spec->num_channels = ARRAY_SIZE(rf_vals_5226);
1785                 spec->channels = rf_vals_5226;
1786         } else if (rt2x00_rf(&rt2x00dev->chip, RF2527)) {
1787                 spec->num_channels = 14;
1788                 spec->channels = rf_vals_5225_2527;
1789         } else if (rt2x00_rf(&rt2x00dev->chip, RF5225)) {
1790                 spec->num_channels = ARRAY_SIZE(rf_vals_5225_2527);
1791                 spec->channels = rf_vals_5225_2527;
1792         }
1793
1794         if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
1795             rt2x00_rf(&rt2x00dev->chip, RF5226)) {
1796                 spec->num_modes = 3;
1797
1798                 txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
1799                 for (i = 0; i < 14; i++)
1800                         txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
1801
1802                 spec->tx_power_a = txpower;
1803         }
1804 }
1805
1806 static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
1807 {
1808         int retval;
1809
1810         /*
1811          * Allocate eeprom data.
1812          */
1813         retval = rt73usb_validate_eeprom(rt2x00dev);
1814         if (retval)
1815                 return retval;
1816
1817         retval = rt73usb_init_eeprom(rt2x00dev);
1818         if (retval)
1819                 return retval;
1820
1821         /*
1822          * Initialize hw specifications.
1823          */
1824         rt73usb_probe_hw_mode(rt2x00dev);
1825
1826         /*
1827          * This device requires firmware
1828          */
1829         __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
1830
1831         /*
1832          * Set the rssi offset.
1833          */
1834         rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
1835
1836         return 0;
1837 }
1838
1839 /*
1840  * IEEE80211 stack callback functions.
1841  */
1842 static void rt73usb_configure_filter(struct ieee80211_hw *hw,
1843                                      unsigned int changed_flags,
1844                                      unsigned int *total_flags,
1845                                      int mc_count,
1846                                      struct dev_addr_list *mc_list)
1847 {
1848         struct rt2x00_dev *rt2x00dev = hw->priv;
1849         u32 reg;
1850
1851         /*
1852          * Mask off any flags we are going to ignore from
1853          * the total_flags field.
1854          */
1855         *total_flags &=
1856             FIF_ALLMULTI |
1857             FIF_FCSFAIL |
1858             FIF_PLCPFAIL |
1859             FIF_CONTROL |
1860             FIF_OTHER_BSS |
1861             FIF_PROMISC_IN_BSS;
1862
1863         /*
1864          * Apply some rules to the filters:
1865          * - Some filters imply different filters to be set.
1866          * - Some things we can't filter out at all.
1867          */
1868         if (mc_count)
1869                 *total_flags |= FIF_ALLMULTI;
1870         if (*total_flags & FIF_OTHER_BSS ||
1871             *total_flags & FIF_PROMISC_IN_BSS)
1872                 *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS;
1873
1874         /*
1875          * Check if there is any work left for us.
1876          */
1877         if (rt2x00dev->packet_filter == *total_flags)
1878                 return;
1879         rt2x00dev->packet_filter = *total_flags;
1880
1881         /*
1882          * When in atomic context, reschedule and let rt2x00lib
1883          * call this function again.
1884          */
1885         if (in_atomic()) {
1886                 queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->filter_work);
1887                 return;
1888         }
1889
1890         /*
1891          * Start configuration steps.
1892          * Note that the version error will always be dropped
1893          * and broadcast frames will always be accepted since
1894          * there is no filter for it at this time.
1895          */
1896         rt73usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
1897         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CRC,
1898                            !(*total_flags & FIF_FCSFAIL));
1899         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_PHYSICAL,
1900                            !(*total_flags & FIF_PLCPFAIL));
1901         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CONTROL,
1902                            !(*total_flags & FIF_CONTROL));
1903         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_NOT_TO_ME,
1904                            !(*total_flags & FIF_PROMISC_IN_BSS));
1905         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_TO_DS,
1906                            !(*total_flags & FIF_PROMISC_IN_BSS));
1907         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_VERSION_ERROR, 1);
1908         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_MULTICAST,
1909                            !(*total_flags & FIF_ALLMULTI));
1910         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_BROADCAST, 0);
1911         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_ACK_CTS, 1);
1912         rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
1913 }
1914
1915 static int rt73usb_set_retry_limit(struct ieee80211_hw *hw,
1916                                    u32 short_retry, u32 long_retry)
1917 {
1918         struct rt2x00_dev *rt2x00dev = hw->priv;
1919         u32 reg;
1920
1921         rt73usb_register_read(rt2x00dev, TXRX_CSR4, &reg);
1922         rt2x00_set_field32(&reg, TXRX_CSR4_LONG_RETRY_LIMIT, long_retry);
1923         rt2x00_set_field32(&reg, TXRX_CSR4_SHORT_RETRY_LIMIT, short_retry);
1924         rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg);
1925
1926         return 0;
1927 }
1928
1929 #if 0
1930 /*
1931  * Mac80211 demands get_tsf must be atomic.
1932  * This is not possible for rt73usb since all register access
1933  * functions require sleeping. Untill mac80211 no longer needs
1934  * get_tsf to be atomic, this function should be disabled.
1935  */
1936 static u64 rt73usb_get_tsf(struct ieee80211_hw *hw)
1937 {
1938         struct rt2x00_dev *rt2x00dev = hw->priv;
1939         u64 tsf;
1940         u32 reg;
1941
1942         rt73usb_register_read(rt2x00dev, TXRX_CSR13, &reg);
1943         tsf = (u64) rt2x00_get_field32(reg, TXRX_CSR13_HIGH_TSFTIMER) << 32;
1944         rt73usb_register_read(rt2x00dev, TXRX_CSR12, &reg);
1945         tsf |= rt2x00_get_field32(reg, TXRX_CSR12_LOW_TSFTIMER);
1946
1947         return tsf;
1948 }
1949 #else
1950 #define rt73usb_get_tsf NULL
1951 #endif
1952
1953 static void rt73usb_reset_tsf(struct ieee80211_hw *hw)
1954 {
1955         struct rt2x00_dev *rt2x00dev = hw->priv;
1956
1957         rt73usb_register_write(rt2x00dev, TXRX_CSR12, 0);
1958         rt73usb_register_write(rt2x00dev, TXRX_CSR13, 0);
1959 }
1960
1961 static int rt73usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
1962                           struct ieee80211_tx_control *control)
1963 {
1964         struct rt2x00_dev *rt2x00dev = hw->priv;
1965         struct skb_desc *desc;
1966         struct data_ring *ring;
1967         struct data_entry *entry;
1968         int timeout;
1969
1970         /*
1971          * Just in case the ieee80211 doesn't set this,
1972          * but we need this queue set for the descriptor
1973          * initialization.
1974          */
1975         control->queue = IEEE80211_TX_QUEUE_BEACON;
1976         ring = rt2x00lib_get_ring(rt2x00dev, control->queue);
1977         entry = rt2x00_get_data_entry(ring);
1978
1979         /*
1980          * Add the descriptor in front of the skb.
1981          */
1982         skb_push(skb, ring->desc_size);
1983         memset(skb->data, 0, ring->desc_size);
1984
1985         /*
1986          * Fill in skb descriptor
1987          */
1988         desc = get_skb_desc(skb);
1989         desc->desc_len = ring->desc_size;
1990         desc->data_len = skb->len - ring->desc_size;
1991         desc->desc = skb->data;
1992         desc->data = skb->data + ring->desc_size;
1993         desc->ring = ring;
1994         desc->entry = entry;
1995
1996         rt2x00lib_write_tx_desc(rt2x00dev, skb, control);
1997
1998         /*
1999          * Write entire beacon with descriptor to register,
2000          * and kick the beacon generator.
2001          */
2002         timeout = REGISTER_TIMEOUT * (skb->len / sizeof(u32));
2003         rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE,
2004                                  USB_VENDOR_REQUEST_OUT,
2005                                  HW_BEACON_BASE0, 0x0000,
2006                                  skb->data, skb->len, timeout);
2007         rt73usb_kick_tx_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON);
2008
2009         return 0;
2010 }
2011
2012 static const struct ieee80211_ops rt73usb_mac80211_ops = {
2013         .tx                     = rt2x00mac_tx,
2014         .start                  = rt2x00mac_start,
2015         .stop                   = rt2x00mac_stop,
2016         .add_interface          = rt2x00mac_add_interface,
2017         .remove_interface       = rt2x00mac_remove_interface,
2018         .config                 = rt2x00mac_config,
2019         .config_interface       = rt2x00mac_config_interface,
2020         .configure_filter       = rt73usb_configure_filter,
2021         .get_stats              = rt2x00mac_get_stats,
2022         .set_retry_limit        = rt73usb_set_retry_limit,
2023         .erp_ie_changed         = rt2x00mac_erp_ie_changed,
2024         .conf_tx                = rt2x00mac_conf_tx,
2025         .get_tx_stats           = rt2x00mac_get_tx_stats,
2026         .get_tsf                = rt73usb_get_tsf,
2027         .reset_tsf              = rt73usb_reset_tsf,
2028         .beacon_update          = rt73usb_beacon_update,
2029 };
2030
2031 static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
2032         .probe_hw               = rt73usb_probe_hw,
2033         .get_firmware_name      = rt73usb_get_firmware_name,
2034         .load_firmware          = rt73usb_load_firmware,
2035         .initialize             = rt2x00usb_initialize,
2036         .uninitialize           = rt2x00usb_uninitialize,
2037         .set_device_state       = rt73usb_set_device_state,
2038         .link_stats             = rt73usb_link_stats,
2039         .reset_tuner            = rt73usb_reset_tuner,
2040         .link_tuner             = rt73usb_link_tuner,
2041         .write_tx_desc          = rt73usb_write_tx_desc,
2042         .write_tx_data          = rt2x00usb_write_tx_data,
2043         .get_tx_data_len        = rt73usb_get_tx_data_len,
2044         .kick_tx_queue          = rt73usb_kick_tx_queue,
2045         .fill_rxdone            = rt73usb_fill_rxdone,
2046         .config_mac_addr        = rt73usb_config_mac_addr,
2047         .config_bssid           = rt73usb_config_bssid,
2048         .config_type            = rt73usb_config_type,
2049         .config_preamble        = rt73usb_config_preamble,
2050         .config                 = rt73usb_config,
2051 };
2052
2053 static const struct rt2x00_ops rt73usb_ops = {
2054         .name           = KBUILD_MODNAME,
2055         .rxd_size       = RXD_DESC_SIZE,
2056         .txd_size       = TXD_DESC_SIZE,
2057         .eeprom_size    = EEPROM_SIZE,
2058         .rf_size        = RF_SIZE,
2059         .lib            = &rt73usb_rt2x00_ops,
2060         .hw             = &rt73usb_mac80211_ops,
2061 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
2062         .debugfs        = &rt73usb_rt2x00debug,
2063 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
2064 };
2065
2066 /*
2067  * rt73usb module information.
2068  */
2069 static struct usb_device_id rt73usb_device_table[] = {
2070         /* AboCom */
2071         { USB_DEVICE(0x07b8, 0xb21d), USB_DEVICE_DATA(&rt73usb_ops) },
2072         /* Askey */
2073         { USB_DEVICE(0x1690, 0x0722), USB_DEVICE_DATA(&rt73usb_ops) },
2074         /* ASUS */
2075         { USB_DEVICE(0x0b05, 0x1723), USB_DEVICE_DATA(&rt73usb_ops) },
2076         { USB_DEVICE(0x0b05, 0x1724), USB_DEVICE_DATA(&rt73usb_ops) },
2077         /* Belkin */
2078         { USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt73usb_ops) },
2079         { USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt73usb_ops) },
2080         { USB_DEVICE(0x050d, 0x905b), USB_DEVICE_DATA(&rt73usb_ops) },
2081         { USB_DEVICE(0x050d, 0x905c), USB_DEVICE_DATA(&rt73usb_ops) },
2082         /* Billionton */
2083         { USB_DEVICE(0x1631, 0xc019), USB_DEVICE_DATA(&rt73usb_ops) },
2084         /* Buffalo */
2085         { USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
2086         /* CNet */
2087         { USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
2088         { USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops) },
2089         /* Conceptronic */
2090         { USB_DEVICE(0x14b2, 0x3c22), USB_DEVICE_DATA(&rt73usb_ops) },
2091         /* D-Link */
2092         { USB_DEVICE(0x07d1, 0x3c03), USB_DEVICE_DATA(&rt73usb_ops) },
2093         { USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) },
2094         /* Gemtek */
2095         { USB_DEVICE(0x15a9, 0x0004), USB_DEVICE_DATA(&rt73usb_ops) },
2096         /* Gigabyte */
2097         { USB_DEVICE(0x1044, 0x8008), USB_DEVICE_DATA(&rt73usb_ops) },
2098         { USB_DEVICE(0x1044, 0x800a), USB_DEVICE_DATA(&rt73usb_ops) },
2099         /* Huawei-3Com */
2100         { USB_DEVICE(0x1472, 0x0009), USB_DEVICE_DATA(&rt73usb_ops) },
2101         /* Hercules */
2102         { USB_DEVICE(0x06f8, 0xe010), USB_DEVICE_DATA(&rt73usb_ops) },
2103         { USB_DEVICE(0x06f8, 0xe020), USB_DEVICE_DATA(&rt73usb_ops) },
2104         /* Linksys */
2105         { USB_DEVICE(0x13b1, 0x0020), USB_DEVICE_DATA(&rt73usb_ops) },
2106         { USB_DEVICE(0x13b1, 0x0023), USB_DEVICE_DATA(&rt73usb_ops) },
2107         /* MSI */
2108         { USB_DEVICE(0x0db0, 0x6877), USB_DEVICE_DATA(&rt73usb_ops) },
2109         { USB_DEVICE(0x0db0, 0x6874), USB_DEVICE_DATA(&rt73usb_ops) },
2110         { USB_DEVICE(0x0db0, 0xa861), USB_DEVICE_DATA(&rt73usb_ops) },
2111         { USB_DEVICE(0x0db0, 0xa874), USB_DEVICE_DATA(&rt73usb_ops) },
2112         /* Ralink */
2113         { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) },
2114         { USB_DEVICE(0x148f, 0x2671), USB_DEVICE_DATA(&rt73usb_ops) },
2115         /* Qcom */
2116         { USB_DEVICE(0x18e8, 0x6196), USB_DEVICE_DATA(&rt73usb_ops) },
2117         { USB_DEVICE(0x18e8, 0x6229), USB_DEVICE_DATA(&rt73usb_ops) },
2118         { USB_DEVICE(0x18e8, 0x6238), USB_DEVICE_DATA(&rt73usb_ops) },
2119         /* Senao */
2120         { USB_DEVICE(0x1740, 0x7100), USB_DEVICE_DATA(&rt73usb_ops) },
2121         /* Sitecom */
2122         { USB_DEVICE(0x0df6, 0x9712), USB_DEVICE_DATA(&rt73usb_ops) },
2123         { USB_DEVICE(0x0df6, 0x90ac), USB_DEVICE_DATA(&rt73usb_ops) },
2124         /* Surecom */
2125         { USB_DEVICE(0x0769, 0x31f3), USB_DEVICE_DATA(&rt73usb_ops) },
2126         /* Planex */
2127         { USB_DEVICE(0x2019, 0xab01), USB_DEVICE_DATA(&rt73usb_ops) },
2128         { USB_DEVICE(0x2019, 0xab50), USB_DEVICE_DATA(&rt73usb_ops) },
2129         { 0, }
2130 };
2131
2132 MODULE_AUTHOR(DRV_PROJECT);
2133 MODULE_VERSION(DRV_VERSION);
2134 MODULE_DESCRIPTION("Ralink RT73 USB Wireless LAN driver.");
2135 MODULE_SUPPORTED_DEVICE("Ralink RT2571W & RT2671 USB chipset based cards");
2136 MODULE_DEVICE_TABLE(usb, rt73usb_device_table);
2137 MODULE_FIRMWARE(FIRMWARE_RT2571);
2138 MODULE_LICENSE("GPL");
2139
2140 static struct usb_driver rt73usb_driver = {
2141         .name           = KBUILD_MODNAME,
2142         .id_table       = rt73usb_device_table,
2143         .probe          = rt2x00usb_probe,
2144         .disconnect     = rt2x00usb_disconnect,
2145         .suspend        = rt2x00usb_suspend,
2146         .resume         = rt2x00usb_resume,
2147 };
2148
2149 static int __init rt73usb_init(void)
2150 {
2151         return usb_register(&rt73usb_driver);
2152 }
2153
2154 static void __exit rt73usb_exit(void)
2155 {
2156         usb_deregister(&rt73usb_driver);
2157 }
2158
2159 module_init(rt73usb_init);
2160 module_exit(rt73usb_exit);